Injury Risk Estimation in Mandible-Related Surgical Procedures: A CBCT Study Based on Vital Interforaminal Anatomical Structures.

The mandibular interforaminal region has been considered safe for surgical procedures; nevertheless, the risk of injury to neurovascular structures, such as the mental foramen (MF) and its related structures (anterior loop [AL] and lingual foramina [LF]) should not be overlooked. The study aimed to evaluate the relative risk of injury to these structures during surgical procedures in the anterior region of the mandible based on cone-beam computed tomography (CBCT) scans. A retrospective cross-sectional and observational study was performed on 250 CBCTs from adults (18-69 years) with dentate jaws. Linear measurements of the MF, AL, and LF were evaluated to estimate the risk of injury to these structures during chin-related surgical procedures. The most frequent distance between the base of the mandible (BM) and MF was 8 mm (30.2%). In addition, 20.4% of the CTs had 6 mm from the vestibular cortical bone to the LF. The commonly found measurement from LF to the apex of the nearest tooth was 7 mm (24.0%); 64.2% of the CTs showed a 2-mm distance between the most distal point of the dental implant site to the most anterior point of the AL. Safety distances for genioplasty techniques (MF to mandible base > 6 mm, 96.6% [CI 95%, 95.0%-98.2%]) were observed. Considering the 5-mm cut-off point between the lower limit of a hypothetical bone graft and the chin, 65.4% (CI 95%, 58.9%-71.9%) of CTs were within this distance. Regarding the safety margin of 8 mm, 85.6% (CI 95%, 80.8%-90.4%) were up to this value. This study found safety margins for genioplasty and chin bone grafting surgical techniques that adopt a 5-mm cut-off point. Further similar studies assessing other surgical methods and employing larger samples from different geographical origins may contribute to this field of investigation.

Identification of the Incisive Branch of the Inferior Alveolar Nerve of Edentulous Mandibles Using Cone-Beam Computerized Tomography.

This study explored the average length of the incisive branch (IB) of the inferior alveolar nerve on cone-beam computerized tomography (CBCT) with regard to patient demographics in patients with edentulous mandibles. CBCT was used in a retrospective study of edentulous mandibles to assess the presence and anatomical variation for the IB. Three independent observers measured bilateral IB lengths. In addition to demographics, IB length and port of exit data were obtained. A 1-way analysis of variance was used to test whether IB length varied by sex or port of exit, and a standard Pearson correlation was used to test for IB length and age significance, with a significance level of P < .05. Intraclass correlation coefficients showed significant agreement in IB length across all observers. No significant difference was noted between the exit port and IB length. An important effect was reported for sex, indicating women have generally shorter IB lengths (9.43 ± 3.99 vs 10.55 ± 3.92). There was a significant correlation with age, but the relationship was weak. Edentulous mandibles have an altered anatomic landscape, and establishing predictive IB dimensions aids practitioners in surgical planning.

Influence of tube current and metal artifact reduction on the diagnosis of external cervical resorption in teeth adjacent to a dental implant in CBCT: an ex-vivo study.

OBJECTIVES: This ex-vivo study aimed to assess the influence of tube current (mA) and metal artifact reduction (MAR) on the diagnosis of early external cervical resorption (EECR) in cone-beam computed tomography (CBCT) in the presence of an adjacent dental implant. MATERIALS AND METHODS: Twenty-three single-rooted teeth were sectioned longitudinally and EECR was induced using a spherical drill and 5% nitric acid in 10 teeth. Each tooth was positioned in the socket of the lower right canine of a dry human mandible and CBCT scans were acquired using 90 kVp, voxel of 0.085 mm, field of view of 5 x 5 cm, and varying tube current (4, 8 or 12 mA), MAR (enabled or disabled) and implant conditions (with a zirconia implant in the socket of the lower right first premolar or without). Five oral radiologists evaluated the presence of EECR in a 5-point scale and the diagnostic values (area under the receiver operating characteristic curve - AUC, sensitivity, and specificity) were compared using multi-way Analysis of Variance (α = 0.05). Kappa test assessed intra-/inter-evaluator agreement. RESULTS: The tube current only influenced the AUC values in the presence of the implant and when MAR disabled; in this case, 8 mA showed lower values (p<0.007). MAR did not influence the diagnostic values (p>0.05). In general, the presence of an implant reduced the AUC values (p<0.0001); sensitivity values with 8 mA and MAR disabled, and specificity values with 4 mA and MAR enabled and 8 mA regardless MAR were also decreased (p<0.0001). CONCLUSIONS: Variations in tube current and MAR were unable to improve EECR detection, which was impaired by the presence of an adjacent implant. CLINICAL RELEVANCE: Increasing tube current or activating MAR tool does not improve EECR diagnosis, which is hampered by the artifacts generated by dental implants.

Preventive Efficacy of Antibiotics after Impacted Mandibular Third Molar Surgery.

OBJECTIVE: To explore the preventive efficacy of antibiotics following surgical removal of the impacted mandibular third molars and screen the potential risk factors. STUDY DESIGN: A cohort trial. Place and Duration of the Study: Department of Oral and Maxillofacial Surgery, Zhejiang University School of Medicine, Stomatology Hospital, Hangzhou, China, from August 2021 to 2022. METHODOLOGY: Cases with impacted mandibular third molar were divided into two groups based on antibiotics use. The primary outcome variable post-operative infection, secondary clinical parameter analgesics intake, and other variables (the operative time, the history of pericoronitis, and wound closure) were documented. RESULTS: The post-operative infections occurred in 3.64% (n = 12) of the 330 cases (n = 330); 3.01% in the antibiotic group (n = 166) and 4.27% in the control group (n = 164, OR = 1.44, 95% CI: 0.49 to 4.06; p = 0.54). Concerning secondary outcome measures, the analgesics that the antibiotic group took was 5.40, and the control group took was 5.95 (95% CI = -0.21 to 1.30; p = 0.16). For those with post-operative infections, the average operative time was 22.83 minutes, whereas for those without post-operative infections it was 14.87 minutes (95% CI = -0.26 to 15.67; p = 0.04). When the operative time was greater than or equal to 15 minutes, it was related to more analgesics use (95% CI: -0.43 to 1.93; p <0.05), also was the history of pericoronitis (95% CI = 0.04 to 1.54; p = 0.04). CONCLUSION: Antibiotics are unnecessary for preventing post-operative infections or minimising analgesic requirements following extraction of the impacted mandibular third molars; operative time and pericoronitis showed a suppressive influence on post-operative recovery. KEY WORDS: Impacted molars, Antibiotics, Analgesics, Operative time, Pericoronitis.

Shape variation in cranium, mandible and teeth in selected mouse strains.

There are different strains of laboratory mouse used in many different fields. These strains differ anatomically. In order to determine these anatomical differences, shape analysis was conducted according to species. CD-1, C57bl/6 and Balb-c strains were preferred to study these differences. Forty-eight adult mouse strains belonging to these strains were utilized. The bones were photographed and geometric morphometry was applied to these photographs. Principal Component Analysis was applied to determine shape variations. In Principal component 1 for cranium, CD-1 and C57bl/6 strain groups showed different shape variations, while Balb-c strain group showed similar shape variations to the other strain groups. Principal Component 1 for the mandible separated the CD-1 and C57bl/6 strain groups in terms of shape variation. Principal Component 2 explained most of the variation between the C57bl/6 and CD-1 lineage groups. In PC1 for molars, the CD-1 group showed a different shape variation from the other groups. Mahalanobis distances and Procrustes distances were measured using Canonical variance analysis to explain the differences between the lineage groups. These measurements were statistically significant. For cranium, in canonical variate 1, CD-1 group of mouse and Balb-c group of mouse were separated from each other. In canonical variate 2, C57bl/6 group of mouse were separated from the other groups. For mandible, Balb-c group of mouse in canonical variate 1 and CD-1 group of mouse in canonical variate 2 were separated from the other groups. For molars, CD-1 group of mouse in canonical variate 1 and Balb-c group of mouse in canonical variate 2 were separated from the other groups. It was thought that these anatomical differences could be caused by genotypic factors as well as dietary differences and many different habits that would affect the way their muscles work.

Topographical and histological analysis of keratinized mucosal grafts removal techniques an ex-vivo study in porcine mandibles.

The aim of this study was to assess the surface and tissue quality of keratinized mucosa grafts (KMG) obtained using the conventional scalpel and mucotome techniques. This was an experimental in vitro/ex vivo study involving six porcine hemi-mandibles. Specimens were harvested using both the mucotome and conventional scalpel techniques, with randomization determining the choice of technique for tissue removal. The specimens were prepared following predefined laboratory protocols and subsequently subjected to optical microscopy for evaluating epithelial and connective tissue and scanning electron microscopy for topographical and 3D profilometry analysis. Tissues harvested using the mucotome exhibited a linear base and uniform thickness, along with the presence of submucosa and fibrous connective tissue, all of which are ideal for graft success. Differences in the surface characteristics of specimens obtained through the two techniques were observed during a comparative analysis of images obtained through both microscopy types. KMG obtained using the mucotome technique displayed greater uniformity and reduced undesirable cell presence compared to the scalpel technique, thereby enhancing the likelihood of success in soft tissue graft surgical procedures. This study provides valuable insights to oral healthcare professionals and may contribute to future research aimed at achieving more successful surgeries, shorter postoperative recovery times, reduced discomfort, and an overall more positive patient experience.

Dental Age Estimation in Northern Chinese Han Children and Adolescents Using Demirjian's Method Combined with Machine Learning Algorithms.

OBJECTIVES: To investigate the application value of combining the Demirjian's method with machine learning algorithms for dental age estimation in northern Chinese Han children and adolescents. METHODS: Oral panoramic images of 10 256 Han individuals aged 5 to 24 years in northern China were collected. The development of eight permanent teeth in the left mandibular was classified into different stages using the Demirjian's method. Various machine learning algorithms, including support vector regression (SVR), gradient boosting regression (GBR), linear regression (LR), random forest regression (RFR), and decision tree regression (DTR) were employed. Age estimation models were constructed based on total, female, and male samples respectively using these algorithms. The fitting performance of different machine learning algorithms in these three groups was evaluated. RESULTS: SVR demonstrated superior estimation efficiency among all machine learning models in both total and female samples, while GBR showed the best performance in male samples. The mean absolute error (MAE) of the optimal age estimation model was 1.246 3, 1.281 8 and 1.153 8 years in the total, female and male samples, respectively. The optimal age estimation model exhibited varying levels of accuracy across different age ranges, which provided relatively accurate age estimations in individuals under 18 years old. CONCLUSIONS: The machine learning model developed in this study exhibits good age estimation efficiency in northern Chinese Han children and adolescents. However, its performance is not ideal when applied to adult population. To improve the accuracy in age estimation, the other variables can be considered.

Determining Whether an Individual is 18 Years or Older Based on the Third Molar Root Pulp Visibility in East China.

OBJECTIVES: To investigate the age-related changes of the mandibular third molar root pulp visibility in individuals in East China, and to explore the feasibility of applying this method to determine whether an individual is 18 years or older. METHODS: A total of 1 280 oral panoramic images were collected from the 15-30 years old East China population, and the mandibular third molar root pulp visibility in all oral panoramic images was evaluated using OLZE 0-3 four-stage method, and the age distribution of the samples at each stage was analyzed using descriptive statistics. RESULTS: Stages 0, 1, 2 and 3 first appeared in 16.88, 19.18, 21.91 and 25.44 years for males and in 17.47, 20.91, 22.01 and 26.01 years for females. In all samples, individuals at stages 1 to 3 were over 18 years old. CONCLUSIONS: It is feasible to determine whether an individual in East China is 18 years or older based on the mandibular third molar root pulp visibility on oral panoramic images.

Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images.

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

Peri-implant soft tissue volume changes after microsurgical envelope technique with a connective tissue graft. A 5-year retrospective case series.

AIM: The aim of the present retrospective case series was to longitudinally assess soft tissue volume changes on the vestibular aspect of implants in relation to keratinized mucosa thickness (KMT) and width (KMW) after the application of the microsurgical envelope technique combined with a connective tissue graft (CTG). MATERIALS AND METHODS: A total of 12 healthy patients received 12 dental implants placed either in the posterior maxilla or mandible. The study involved the harvesting of 12 CTGs with a minimally invasive single-incision technique, grafted to the vestibular peri-implant soft tissue utilizing the envelope technique, followed by the insertion of 12 screw-retained IPS e.max crowns. RESULTS: The healing process was uneventful across all areas, and all patients were followed up for a period of 5 years. The evaluation of KMT showed the highest decrease in the first 6 weeks after surgery (5.5 ± 0.79 to 4.59 ± 0.62 mm), then dropped slightly to 4 ± 0.85 mm, after which it maintained at 4 ± 0.36 mm until the 2-year time point. Between the second and third years after surgery, a further decrease of 3.59 ± 0.42 mm was recorded for KMT, which then remained constant until the end of the 5-year research period. The observations regarding KMW were slightly different, with the measurements demonstrating the greatest decrease in first 6 weeks (from 2.5 ± 0.42 to 1.5 ± 0.42 mm), which was maintained until the 1-year time point. Between the first and second years after surgery, the KMW increased to 2 ± 0.60 mm and remained level for the next 3 years, at 2 ± 0.85 mm. CONCLUSIONS: The current research demonstrated the advantages of using a combination of a minimally invasively harvested CTG and the microsurgical envelope technique for a duration of 5 years.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

Presence of single nucleotide polymorphisms in transforming growth factor ß and insulin-like growth factor 1 in class II malocclusions due to retrognathic mandible.

AIM: The aim of this study was to evaluate specific single nucleotide polymorphisms (SNP) of transforming growth factor-beta (TGF-ß) (rs1800469) and insulin-like growth factor-1 (IGF-1) (rs17032362) genes in Class II individuals with a normal maxilla and retrognathic (short) mandible.

Full life cycle changes of low impacted mandibular third molar associated cystic lesions and adjacent tooth root resorption: a retrospective study.

OBJECTIVE: Low impacted third molars are usually asymptomatic and are often found by X-ray examination. The removal of asymptomatic low impacted third molars is one of the most controversial clinical issues in oral and maxillofacial surgery. METHODS: In this study, 806 patients with low impacted mandibular third molars (LIMTMs) (full bony impaction) were analyzed to determine the prevalence and risk factors for cystic lesions and adjacent tooth root resorption throughout the patients' entire life cycle. RESULTS: The results showed that the prevalence of adjacent tooth root resorption and cystic lesions was age-related, exhibiting a trend of first increasing and then decreasing; prevalence peaked at the age of 41 to 45 years old, the prevalence rates were 12.50% and 11.11% respectively. And the lowest prevalence rate was 2.86% and 2.44% in ≥ 61 group and 56- to 60-year age group respectively. Age was an independent risk factor for adjacent tooth root resorption of LIMTMs, whereas age and impaction type (especially inverted impaction) were independent risk factors for cystic lesions. CONCLUSIONS: The full life cycle management strategy for LIMTMs may need to be individualized. Surgical removal is recommended for LIMTMs in patients younger than 41 to 45 years, especially for inverted, mesioangular, and horizontally impacted LIMTMs. LIMTMs in patients older than 41 to 45 years may be treated conservatively with regular follow-up, but surgical removal of inverted impacted LIMTMs is still recommended to avoid cyst formation.

Patient-specific beta-tricalcium phosphate scaffold for customized alveolar ridge augmentation: a case report : Case Report: patient-specific ß-TCP scaffold for alveolar ridge CBR.

BACKGROUND: Beta-tricalcium phosphate (ß-TCP) is a biocompatible ceramic material widely used in the field of oral regeneration. Due to its excellent biological and mechanical properties, it is increasingly utilized for alveolar ridge augmentation or guided bone regeneration (GBR). With recent advances in computer-aided design and manufacturing (CAD/CAM), ß-TCP can now be used in the form of digitally designed patient-specific scaffolds for customized bone regeneration (CBR) of advanced defects in a two-stage implant therapy concept. In this case report following the CARE case report guidelines, we present a novel application of a patient-specific ß-TCP scaffold in pre-implant mandibular alveolar ridge augmentation. CASE PRESENTATION: A 63-year-old female patient with significant horizontal bone loss in the posterior mandible was treated with a custom ß-TCP scaffold in the context of a two-stage backward-planned implant therapy. Cone-beam computed tomography nine months after augmentation showed successful integration of the scaffold into the surrounding bone, allowing implant placement. Follow-up until two years after initial surgery showed excellent oral and peri-implant health. CONCLUSIONS: This case highlights the potential of patient-specific ß-TCP scaffolds for alveolar ridge augmentation and their advantage over traditional techniques, including avoidance of xeno-, allo-, and autografts. The results provide encouraging evidence for their use in clinical practice. Patient-specific ß-TCP scaffolds may be a promising alternative for clinicians seeking to provide their patients with safe, predictable, and effective alveolar ridge augmentation results in customized bone regeneration procedures.

Application of concentrated growth factor in mandibular third molar extraction: A protocol for systematic review and meta-analysis.

OBJECTIVE: We will perform the systematic review to evaluate the effect of applying concentrated growth factor (CGF) on relieving postoperative complications and promoting wound healing following mandibular third molar extraction. METHODS: The PubMed, Web of Science, Embase, Cochrane Library, China National Knowledge Infrastructure (CNKI), Wanfang Database, China Biology Medicine Disc (CBM), and VIP Databases will be comprehensively searched up to May 31, 2024. Randomized controlled trials (RCTs) examining the application of CGF after mandibular third molar extraction will be included. The protocol was registered in PROSPERO, and the registration ID was CRD42023463234. Two reviewers will conduct the literature search, eligible study selection, data extraction, and bias risk assessment (using the Cochrane Risk of Bias 2.0 tool). Data analysis will be performed with RevMan software (version 5.4). RESULTS: The results of this study will be available in a peer-reviewed journal. CONCLUSION: Our study will provide scientific evidence regarding the efficacy of applying CGF in mandibular third molar extraction.

The mylohyoid line is highly variable but does not affect the microarchitecture of the edentulous alveolar bone - an anatomical micro-CT study.

OBJECTIVES: To evaluate in the absence of teeth the variability of the mylohyoid line (ML), the microarchitecture of the adjacent bone, and whether the variable prominence/width of the ML is associated with the quality of the adjacent bone. METHODS: µCT scans of 28 human mandibles from anatomical specimens were analyzed. The following parameters were assessed in four edentulous areas (first and second premolar (PM), first, second, and third molar (M1/2/3)): ML width, cortical thickness (CtTh), average cortical- (Avg.Ct.BV/TV), and trabecular bone volume fraction (Avg.Tb.BV/TV). RESULTS: The ML width increased from the PM towards the M2 region, which also showed the highest variance (range: 0.4-10.2 mm). The CtTh showed a decrease in the M3 region, while Avg.Ct.BV/TV and Avg.Tb.BV/TV hardly differed among the regions. In the multivariable model on the effect of the various parameters on the ML width, only gender and tooth region were significant. Specifically, male specimens were associated with a wider ML width compared to female specimens and the M2 region was associated with a wider ML width compared to the other tooth regions. CONCLUSION: The ML width was not associated with the cortical and trabecular bone quality in the adjacent bone, while gender and tooth region had a significant effect. Specifically, the ML width was lower in female, but peaked in the M2 region with a median width of 3-4 mm. CLINICAL RELEVANCE: From a clinical point of view, it was confirmed that the ML is in general a highly variable structure, especially in the M2 region, but the ML width does not allow any conclusions on the bone quality. Altogether, this underlines the need for an individual and accurate diagnostic prior to any surgical intervention.

Solitary primary intraosseous xanthoma of the mandible in a 15-year-old boy: a case report.

BACKGROUND: A xanthoma is a rare bone condition consisting of a predominant collection of lipid-rich, foamy histiocytes. The central xanthoma of the jaws is a unique benign tumor. CASE REPORT: A 15-year-old Caucasian male has been presented to our department. He had radiological changes in the area of the left mandibular angle, with an area of diffuse osteolysis of 3.0 cm by 2.0 cm. Computed tomography reveals an area of diffuse osteolysis that starts from the distal root of the lower second molar and reaches the ascending process. A bone biopsy was performed, which revealed a benign proliferative process composed of histiocytic cells involving and infiltrating trabecular bone in a background of loose fibrous connective tissue devoid of any other significant inflammatory infiltrate. The size of the formation was 2.9 cm by 2.0 cm. Immunohistochemical staining for CD68 was strongly positive and negative for S-100 and CD1a. From routine blood tests, cholesterol, triglycerides, and blood sugar are within normal values, which excludes systemic metabolic disease. Subsequent to the surgical intervention, the patient underwent postoperative assessments at intervals of 14, 30, 60 days, and a year later, revealing the absence of any discernible complications during the aforementioned observation periods. CONCLUSION: The diagnosis of primary xanthoma of the mandible is rare and can often be confused with other histiocytic lesions. A differential diagnosis should be made with nonossifying fibroma and Langerhans cell histiocytosis, as in our case. In these cases, immunohistochemistry with CD 68, S-100, and CD1a, as well as blood parameters, are crucial for the diagnosis.

Chewing asymmetry in dogs: Exploring the importance of the fossa masseterica and first molar teeth morphology.

Dogs are animals with strong bite force. This strong bite mechanism has led to significant changes in the skeletal system such as fossa masseterica. It can be thought that one side is used more than the other side in chewing and is related to the preference of using the same side's hand, eye and foot. In the study, directional asymmetry and fluctuating asymmetry, which occurs as a result of chewing asymmetry, were examined on the first molar teeth and the fossa masseterica in 85 dog mandibles including a wide diversity of morphotypes. The association of high PC1 values for directional asymmetry with a pronounced cranial index, as evident in breeds like Pekingese, Pomeranian and Bulldog, indicates a potential evolutionary or selective breeding trend favouring brachycephaly. On the contrary, guardian breeds like the German shepherd and Bernese mountain dog, which typically require strong jaws for their roles, showcased reduced PC1 values, which might be related to their functional morphology. Similarly, the PCA results for the first molar teeth shape variations also highlighted the influence of cranial shape, with boxer dogs displaying notably higher PC1 values. The fluctuating asymmetrical distributions provided valuable insights into individualistic variations. Interestingly, no specific breed distribution trend was observed for these asymmetries, indicating a more individual-based variation rather than breed-based. It is essential to note that while these results provide valuable insights, further studies are required to understand the underlying causes better. Factors like genetic variations, developmental processes, dietary habits and external environmental factors could play pivotal roles in these observed morphological differences.