Loss of ß-arrestin2 aggravated condylar cartilage degeneration at the early stage of temporomandibular joint osteoarthritis.

OBJECTIVE: Temporomandibular joint osteoarthritis (TMJOA) is a chronic degenerative joint disorder characterized by extracellular matrix degeneration and inflammatory response of condylar cartilage. ß-arrestin2 is an important regulator of inflammation response, while its role in TMJOA remains unknown. The objective of this study was to investigate the role of ß-arrestin2 in the development of TMJOA at the early stage and the underlying mechanism. METHODS: A unilateral anterior crossbite (UAC) model was established on eight-week-old wild-type (WT) and ß-arrestin2 deficiency mice to simulate the progression of TMJOA. Hematoxylin-eosin (HE) staining and microcomputed tomography (micro-CT) analysis were used for histological and radiographic assessment. Immunohistochemistry was performed to detect the expression of inflammatory and degradative cytokines, as well as autophagy related factors. Terminal-deoxynucleotidyl transferase mediated nick end labeling (TUNEL) assay was carried out to assess chondrocyte apoptosis. RESULTS: The loss of ß-arrestin2 aggravated cartilage degeneration and subchondral bone destruction in the model of TMJOA at the early stage. Furthermore, in UAC groups, the expressions of degradative (Col-X) and inflammatory (TNF-α and IL-1ß) factors in condylar cartilage were increased in ß-arrestin2 null mice compared with WT mice. Moreover, the loss of ß-arrestin2 promoted apoptosis and autophagic process of chondrocytes at the early stage of TMJOA. CONCLUSION: In conclusion, we demonstrated for the first time that ß-arrestin2 plays a protective role in the development of TMJOA at the early stage, probably by inhibiting apoptosis and autophagic process of chondrocytes. Therefore, ß-arrestin2 might be a potential therapeutic target for TMJOA, providing a new insight for the treatment of TMJOA at the early stage.

A study on volumetric change of mandibular condyles with osteoarthritis using cone-beam computed tomography.

This study aimed to quantitatively assess three-dimensional changes in the mandibular condyle with osteoarthritis using cone-beam computed tomography (CBCT). Pre- and post-treatment CBCT images of temporomandibular joints (TMJs) from 66 patients were used to assess longitudinal changes in condylar volume within individual patients using 3D slicer software. Total volume difference (dV), net increase (dV + , bone deposition), and net decrease (dV- , bone resorption) after treatment were analyzed based on clinical and radiological factors. Condyles with surface erosion at their first visit showed significantly decreased volume after treatment compared to condyles without erosion (p < 0.05). Amounts of bone resorption and deposition were higher in condyles with surface erosion (both p < 0.01). In patients with condylar erosion, the presence of joint pain was associated with a decrease in condylar volume and an increase in net resorption (both p < 0.01). When both joint pain and condylar erosion were present, patients with parafunctional habits showed reduced condylar volume after treatment (p < 0.05). Condylar volume change after treatment was negatively correlated with the duration of pain relief (R = - 0.501, p < 0.05). These results indicate that condylar erosion and TMJ pain could be significant variables affecting TMJ volume changes after treatment. Establishing appropriate treatment strategies is crucial for managing condylar erosion and TMJ pain.

Long-term haplodeficency of DSPP causes temporomandibular joint osteoarthritis in mice.

BACKGROUND: Extracellular matrix (ECM) protein malfunction or defect may lead to temporomandibular joint osteoarthritis (TMJ OA). Dentin sialophophoprotein (DSPP) is a mandibular condylar cartilage ECM protein, and its deletion impacted cell proliferation and other extracellular matrix alterations of postnatal condylar cartilage. However, it remains unclear if long-term loss of function of DSPP leads to TMJ OA. The study aimed to test the hypothesis that long-term haploinsufficiency of DSPP causes TMJ OA. MATERIALS AND METHODS: To determine whether Dspp+/- mice exhibit TMJ OA but no severe tooth defects, mandibles of wild-type (WT), Dspp+/-, and Dspp homozygous (Dspp-/-) mice were analyzed by Micro-computed tomography (micro-CT). To characterize the progression and possible mechanisms of osteoarthritic degeneration over time in Dspp+/- mice over time, condyles of Dspp+/- and WT mice were analyzed radiologically, histologically, and immunohistochemically. RESULTS: Micro-CT and histomorphometric analyses revealed that Dspp+/- and Dspp-/- mice had significantly lower subchondral bone mass, bone volume fraction, bone mineral density, and trabecular thickness compared to WT mice at 12 months. Interestingly, in contrast to Dspp-/- mice which exhibited tooth loss, Dspp+/- mice had minor tooth defects. RNA sequencing data showed that haplodeficency of DSPP affects the biological process of ossification and osteoclast differentiation. Additionally, histological analysis showed that Dspp+/- mice had condylar cartilage fissures, reduced cartilage thickness, decreased articular cell numbers and severe subchondral bone cavities, and with signs that were exaggerated with age. Radiographic data showed an increase in subchondral osteoporosis up to 18 months and osteophyte formation at 21 months. Moreover, Dspp+/- mice showed increased distribution of osteoclasts in the subchondral bone and increased expression of MMP2, IL-6, FN-1, and TLR4 in the mandibular condylar cartilage. CONCLUSIONS: Dspp+/- mice exhibit TMJ OA in a time-dependent manner, with lesions in the mandibular condyle attributed to hypomineralization of subchondral bone and breakdown of the mandibular condylar cartilage, accompanied by upregulation of inflammatory markers.

The Evaluation of Condylar Position Change in the Asymmetric Mandible Following Sagittal Split Osteotomy.

BACKGROUND: The change of condyle position following orthognathic surgery affects the stability of treatments. This study aims to assess the correlation between the amount of condyles' position change and the severity of mandibular asymmetry following BSSO. MATERIALS AND METHODS: This is a cross-sectional study. Subjects with asymmetric mandibular prognathism following BSSO were studied. Subjects were classified into 2 groups: group 1, subjects had mandibular asymmetry without occlusal cant and underwent BSSO. Group 2, subjects had mandibular asymmetry with occlusal cant and underwent BSSO+ Lefort I osteotomy. The condyle position was evaluated using cone-beam computer tomography (CBCT). Pearson's correlation test was used to assess any correlation between the condyle changes and the change in the mandible in sagittal and anterior-posterior directions. RESULTS: A total of 44 subjects were studied. In group 1, the condyle tilted outward in the deviated condyle and inward in the non-deviated condyle immediately after osteotomy. After 12 months, both condyles showed a rotation relative to the original position. In group 2, the condyles of the deviated sides and non-deviated sides moved inferiorly after surgery (condylar sagging), which was more significant in the non-deviated sides. The condyle rotation was similar to group 1. The severity of asymmetry and occlusal cant correlate with the condylar position change in the two groups. CONCLUSION: The severity of mandibular asymmetry correlates with the amount of condyles' position change immediately after BSSO. However, the condyles tend to return to their original position 12 months later.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures.

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders with and without skeletal lateral mandibular asymmetry: a cone beam computed tomographic study.

BACKGROUND: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). METHODS: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. RESULTS: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. CONCLUSION: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Novel Use of Virtual Reality and Augmented Reality in Temporomandibular Total Joint Replacement Using Stock Prosthesis.

This technical innovation demonstrates the use of ImmersiveTouch Virtual Reality (VR) and Augmented Reality (AR)-guided total temporomandibular joint replacement (TJR) using Biomet stock prosthesis in 2 patients with condylar degeneration. TJR VR planning includes condylar resection, prosthesis selection and positioning, and interference identification. AR provides real-time guidance for osteotomies, placement of prostheses and fixation screws, occlusion verification, and flexibility to modify the surgical course. Radiographic analysis demonstrated high correspondence between the preoperative plan and postoperative result. The average differences in the positioning of the condylar and fossa prosthesis are 1.252 ± 0.269 mm and 1.393 ± 0.335 mm, respectively. The main challenges include a steep learning curve, intraoperative technical difficulties, added surgical time, and additional costs. In conclusion, the case report demonstrates the advantages of implementing AR and VR technology in TJR's using stock prostheses as a pilot study. Further clinical trials are needed prior to this innovation becoming a mainstream practice.

Exploring the effect of disc displacement on the risk and severity of condylar erosion in adult temporomandibular disorder patients: A CBCT and MRI study.

OBJECTIVE: The objective of the study was to investigate the relationship between types of disc displacement (DD) diagnosed by magnetic resonance imaging (MRI), and the risk (presence or absence) and severity of condylar erosion (CE) graded using cone-beam computed tomography (CBCT) in adult Temporomandibular disorders (TMD) patients. METHODS: A total of 353 TMD patients (283 females, 70 males) underwent MRI scans to categorise DD as normal (NA), anterior displacement with reduction (ADDR), or anterior displacement without reduction (ADDNR). CE severity was graded on a scale of 0-3 (absence, mild, moderate or severe) using CBCT. To establish the plausibility and cut-off points for CE diagnosis, the severity of CE was then further divided into three classifications: Grade 0 versus 1 + 2 + 3; Grades 0 + 1 versus 2 + 3; Grades 0 + 1 + 2 versus 3. Logistic regression analysis was performed, adjusting for age, gender and joint correlation. RESULTS: ADDNR significantly increased the risk of CE compared with NA (OR = 10.04, 95% CI: [6.41, 15.73]) and showed a significant increase in CE severity across all classifications (ORs = 10.04-18.95). The effects of ADDNR were significant in both genders (p < .001) and had a greater impact in females. ADDR was predominantly associated with mild CE. CONCLUSIONS: ADDNR significantly increased the risk and severity of CE independent of gender when compared to NA, whereas ADDR was mainly associated with mild CE. Slight cortical discontinuity may represent a subclinical diagnosis requiring further investigation.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Diagnostic accuracy of bone SPECT and SPECT/CT imaging in the diagnosis of unilateral condylar hyperplasia: A systematic review and meta-analysis.

Imaging with bone scans plays an important role in the diagnostic path of patients with unilateral condylar hyperactivity or unilateral condylar hyperplasia (UCH). The aim of this study is to perform a systematic review of the diagnostic performance of the bone SPECT and SPECT/CT scan for the diagnosis of UCH. PubMed, SCOPUS and EMBASE were searched electronically to identify diagnostic accuracy studies that assessed the diagnostic value of bone SPECT and SPECT/CT for the diagnosis of UCH, Meta-analyses were performed with Metadisc 1.4 and 2.0. A total of 14 studies, with a total number of 887 patients, were included in the qualitative analysis and 11 studies qualified for meta-analyses. The pooled sensitivity and specificity for the SPECT scan were 0.814 (95 % CI: 0.639-0.915) and 0.774 (95 % CI: 0.655-0.861), for the SPECT/CT scan these were 0.818 (95 % CI: 0.749-0.874) and 0.901 (95 % CI: 0.840-0.945). The summary receiver operating characteristics of the SPECT scan showed an area under the curve of 0.847 (95 % CI: 0.722-0.972) and that of the SPECT/CT scan was 0.928 (95 % CI: 0.876-0.980). CONCLUSION: Both bone SPECT scan and SPECT/CT scan provide a high diagnostic accuracy for UCH. The added value of the SPECT/CT scan is questionable and given the potential disadvantages of the SPECT/CT scan, including the increased radiation dose and costs, the diagnostic modality of first choice in patients with UCH should be a SPECT scan.

The effect of tooth loss on the temporomandibular joint space: A CBCT study.

OBJECTIVE: The tooth loss has a significant impact on the positioning of the condyle in the glenoid fossa and joint spaces of the temporomandibular joint (TMJ). The aim of this study was to assess the association between tooth loss and TMJ spaces using cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This retrospective investigation involved the evaluation of CBCT images of the bilateral TMJs in a cohort of 111 individuals, comprising 68 males and 43 women. The dentition of the patients was categorized into three categories, including A (65.4%), B (19.1%), and C (16.4%), based on the Eichner index. Anterior, superior, and posterior joint spaces were then measured in sagittal views. The Kruskal-Wallis test and Mann-Whitney test were employed to identify significant differences among the three Eichner groups. RESULTS: The findings of the present study suggested that there was no statistically significant variation in the anterior joint space among different Eichner groups within the general population (p = .781). Nevertheless, the superior and posterior joint spaces exhibited statistically significant alterations, as indicated by p-values of .039 and .010, respectively. It was detected that condyles were positioned inferiorly and posteriorly in group C when compared to groups A and B. CONCLUSION: The present study indicated that greater loss of tooth-supporting zones is associated with posterior and inferior displacement of condyles. Understanding these relationships helps emphasize how crucial it is to replace missing teeth to enhance occlusion support and, in turn, stop the progression and further deterioration of temporomandibular disorders.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.

[Comparison of the virtual surgical planning position of maxilla and condyle with the postoperative real position in patients with mandibular protrusion].

OBJECTIVE: To compare the difference between virtual surgical planning (VSP) position and postoperative real position of maxilla and condyle, and to explore the degree of intraoperative realization of VSP after orthognathic surgery. METHODS: In this study, 36 patients with mandibular protrusion deformity from January 2022 to December 2022 were included. All the patients had been done bilateral sagittal split ramus osteotomy (SSRO) combined with Le Fort Ⅰ osteotomy under guidance of VSP. The VSP data (T0) and 1-week postoperative CT (T1) were collected, the 3D model of postoperative CT was established and segmented into upper and lower jaws in CCMF Plan software. At the same time, accor-ding to the morphology of palatal folds, the virtual design was registered with the postoperative model, and the unclear maxillary dentition in the postoperative model was replaced. Then the postoperative model was matched with VSP model by registration of upper skull anatomy that was not affected by the operation. The three-dimensional reference plane and coordinate system were established. Selecting anatomical landmarks and their connections of condyle and maxilla for the measurement, we compared the coordinate changes of marker points in three directions, and the angle changes between the line connecting the marker points and the reference plane to analyze the positional deviation and the angle deviation of the postoperative condyle and maxilla compared to VSP. RESULTS: The postoperative real position of the maxilla deviates from the VSP by nearly 1 mm in the horizontal and vertical directions, and the anteroposterior deviation was about 1.5 mm. In addition, most patients had a certain degree of counterclockwise rotation of the maxilla after surgery. Most of the bilateral condyle moved forward, outward and downward (the average distance deviation was 0.15 mm, 1.54 mm, 2.19 mm, respectively), and rotated forward, outward and upward (the average degree deviation was 4.32°, 1.02°, 0.86°, respectively) compared with the VSP. CONCLUSION: VSP can be mostly achieved by assistance of 3D printed occlusal plates, but there are certain deviations in the postoperative real position of maxilla and condyle compared with VSP, which may be related to the rotation axis of the mandible in the VSP. It is necessary to use patient personalized condylar rotation axis for VSP, and apply condylar positioning device to further improve surgical accuracy.

Management of bilateral condylar agenesis by distraction osteogenesis: a rare case report.

Condylar agenesis is a rare case involving developmental disturbances related to growth of mandible, facial aesthetics, dentition development, muscle deformation, and occlusal problems. As such, this is a rare condition, and there is no internationally accepted protocol for the same. Underdevelopment or defective formation of condyle may be congenital or acquired. Condylar agenesis is congenital non formation of condyle, while hypoplasia is poor development. We report a case of bilateral condylar agenesis in a 30-year-old female patient.

Age and Gender-related Morphometric Assessment and Degenerative Changes of Temporomandibular Joint in Symptomatic Subjects and Controls using Cone Beam Computed Tomography (CBCT): A Comparative Analysis.

BACKGROUND: The temporomandibular joint diseases have been associated with various predisposing factors. Joint spaces, articular eminence height and inclination, and the shapes of the condylar and glenoid fossa have all been shown to vary in temporomandibular joint diseases (TMD) patients. Advanced imaging techniques like cone beam computed tomography (CBCT) have been employed to estimate these parameters. AIMS AND OBJECTIVES: The aim of the current study was to investigate the condylar morphology, condylar and glenoid fossa shapes, and assessment of joint spaces, such as anterior, posterior, superior, lateral, and medial spaces, through CBCT slices in coronal and sagittal planes and compare them between the control group and TMD group. MATERIALS AND METHODS: A cross-sectional study was planned where 80 joints in 40 patients were assessed for the above parameters; group I consisted of healthy patients, and group II included those with temporomandibular joint diseases (TMDs). The articular eminence height and inclination were assessed on the midsagittal section. The condylar changes and shapes of the glenoid fossa and condyles, as well as the joint spaces, were assessed on the selected coronal and sagittal sections. RESULTS: The condylar fossa had a triangular shape in the TMJ group and an oval shape in the control group. The results were highly significant (P = 0.000**). A highly significant difference in morphological parameters, such as AJS, PJS, SJS, MJS, LJS, articular eminence height, and inclination, was found between the two groups (P = 0.000**). The association of morphological parameters, such as AJS, PJS, SJS, MJS, LJS, and articular eminence height and inclination were compared with condylar and glenoid fossa shapes, where the association of superior joint space and articular eminence inclination was observed. A highly significant difference was noted between the two groups with regard to all the parameters with P=0.00*. CONCLUSION: The articular eminence inclination, as well as the superior joint space, were found to be associated with the glenoid and condyle fossa shapes in the TMJ group. These observations would, therefore, help in the early diagnosis of temporomandibular joint diseases.

Investigation of the accuracy of dynamic condylar position: A model study.

OBJECTIVES: To evaluate dynamic condylar positions by integrating mandibular movement recording data and cone-beam computed tomography (CBCT) and to investigate its accuracy via dynamic model experiments. METHODS: A polyvinyl chloride skull model was utilized. A robot arm was used to operate the mandible to perform mouth opening, closing, protrusion, and lateral movements. A recording device, worn on the skull, was used to record the dynamic process and an optical position tracking (OPT) system was used to simultaneously trace the movements. A self-developed software module was used to evaluate the dynamic condylar position by integrating the dynamic tracing data and a virtual skull model derived from CBCT images. Errors were defined as differences between the dynamic coordinates of six landmarks around the condylar area derived from the software module (test) and OPT system (gold standard). RESULTS: The condylar position errors were 0.76 ± 0.31, 0.55 ± 0.15, and 0.68 ± 0.23 mm for mouth opening, bilateral, and protrusion movements, respectively. Furthermore, the errors for small, moderate, and large mouth opening movements were 0.62 ± 0.19, 0.69 ± 0.29, and 0.94 ± 0.31 mm, respectively. The errors for all movements, except for large mouth opening, were significantly less than 1 mm (P < 0.05). The error was not different from 1 mm in the large mouth opening movement (P > 0.05). CONCLUSIONS: Our developed method of achieving dynamic condylar position by integrating mandibular movement recording data and CBCT images is clinically reliable. CLINICAL SIGNIFICANCE: This study proved the reliability of evaluating dynamic condylar position using a commercial dynamic recording instrument and CBCT images.

Comparison of disc position stability and condylar bone remodelling between two open disc repositioning surgeries: a retrospective single-centre cohort study.

BACKGROUND AND OBJECTIVE: Open suturing (OSu) and mini-screw anchor (MsA) are two commonly used open disc repositioning surgeries for anterior disc displacement (ADD) of the temporomandibular joint (TMJ). This study assesses the differences in disc position stability (DPS) and condylar bone remodelling (CBR) between these two surgical procedures in a single centre. METHODS: A retrospective cohort study using MRI scans (pre-operation, 1 week and 12 months post-operation) of all patients who had open TMJ disc repositioning surgery from January 2016 to June 2021 at one centre through two surgical techniques (OSu and MsA) was performed. The predictor variable was technique (OSu and MsA). Outcome variables were DPS and CBR. During follow-up, DPS was rated as good, acceptable and poor, and CBR was graded as improved, unchanged, and degenerated. Multivariate analysis was used to compare the DPS and CBR at 12 months after adjusting five factors including age, sex, Wilkes stage, preoperative bone status (normal, mild/moderate abnormal) and the degree of disc repositioning (normal, overcorrected, and posteriorly repositioned). Relative risk (RR) for DPS and CBR was calculated by multivariate logistic regression. RESULTS: Three hundred eighty-five patients with 583 joints were included in the study. MRIs at 12 months showed that 514 joints (93.5%) had good DPS, and 344 joints (62.5%) had improved CBR. Multivariate analysis revealed that OSu had higher DPS (RR=2.95; 95% CI, 1.27-6.85) and better CBR (RR=1.58; 95% CI, 1.02-2.46) than MsA. Among the factors affecting DPS, females had better results than males (RR=2.63; 95% CI, 1.11-6.26) and overcorrected or posteriorly repositioned discs were more stable than normally repositioned discs (RR=5.84; 95% CI, 2.58-13.20). The improvement in CBR decreased with age increasing (RR=0.91; 95% CI, 0.89-0.93). Preoperative mild/moderate abnormal bone status had a higher probability of improved CBR compared to normal preoperative bone status (RR=2.60; 95% CI, 1.76-3.83). CONCLUSION: OSu had better DPS and CBR than MsA. Sex and the degree of disc repositioning impacted DPS, while age and preoperative bone status affected CBR.

Volumetric comparison of mandibular condyles and mandibles in the different skeletal classes in the Saudi population.

Background: Assessing the relationship between the condyle and mandible volume and the various skeletal classes is essential in orthodontic diagnosis. The current study evaluated this relationship using volumetric cone-beam computed tomography (CBCT), cephalometric methods, and the correlations between them. Materials and Methods: The study examined 37 full-head CBCTs (74 condyles) from adults in the Saudi population. The condyle and mandible were separated from within the CBCT images. The volume of each segment was compared to measurements from multiple cephalometric analyses. Results: The combined total condylar volume has a moderate correlation with the maxillomandibular differential in each of the genders and in the total sample. Mandibular volume has a significant correlation with the Wits appraisal (sagittal classification) in males. It was also significantly correlated with the vertical classification using gonial angles in females and in the total sample. Conclusion: The relationship between mandible and condyle volume and cephalometric measurements is both dimensional and within the maxillomandibular complex rather than positional or related to the cranial base. Also, the correlation between the condylar and mandibular volumes and the sagittal and vertical dimensions in the orthodontic skeletal classes provides better insight into the mandibular complex.

Accuracy and stability of the condyle position after orthognathic surgery: A retrospective study.

The purpose of this study was to evaluate the accuracy and stability of condylar positioning in patients treated with bimaxillary procedures compared with patients treated with maxillary procedures alone. All patients had undergone treatment at Odense University Hospital and were treated with inferior maxillary procedures. The primary outcome was changes in condyle position and the primary predictor variable was time: pre-operative (T0) measurements to 1-week post-operative (T1) and 1-year post-operative (T2) measurements. Condyle movement was measured using dual voxel-based alignment. Sixteen patients were included. Seven patients underwent solitary maxillary procedure and 9 patients bimaxillary procedure. Bimaxillary procedures overall showed a condyle positional change in pitch from T0 to T1 and T1 to T2 compared to maxillary procedures alone. Condylar translation was stable despite large differences in positioning. Compared to solitary maxillary procedures, bimaxillary procedures showed a statistically significant anterocranial rotation at 1-week follow-up movement (3.95° vs. -0.95°; SD 3,74 vs 1,05; P value = 0.000) and an additional statistically significant anterocranial movement at 1 year after surgery (4.89° vs 0.60°; SD 3,82 vs 0,92; P value = 0.000). In conclusion a need for greater anterocranial stability of the sagittal split osteotomy than that provided by 3 bicortically fixated screws alone might be indicated.