Combined open maxillectomy and endoscopic endonasal resection of a giant V2 trigeminal schwannoma.

BACKGROUND: Trigeminal schwannoma is a rare type of tumor that arises from the Schwann cells of the trigeminal nerve. METHOD: We present a case of a patient with a giant V2 trigeminal schwannoma with painful swelling in the left maxilla. A complete resection using a combined open maxillectomy and endoscopic endonasal approach was performed. CONCLUSION: This case highlights the importance of a multidisciplinary approach to perform a combined open and endoscopic approach for safe resection while preserving adequate speech and swallowing.

Panoramic Radiography in the Evaluation of the Relationship of Maxillary Molar Teeth and Maxillary Sinuses on the Deep Learning Models Improved with the Findings Obtained by Cone Beam Computed Tomography.

BACKGROUND: Panoramic radiography (PR) is available to determine the contact relationship between maxillary molar teeth (MMT) and the maxillary sinus floor (MSF). However, as PRs do not provide clear and detailed anatomical information, advanced imaging methods can be used. AIM: The aim of this study was to evaluate the diagnostic performance of deep learning (DL) applications that assess the relationship of the MSF to the first maxillary molar teeth (fMMT) and second maxillary molar teeth (sMMT) on PRs with data confirmed by cone beam computed tomography (CBCT). METHODS: A total of 2162 fMMT and sMMT were included in this retrospective study. The contact relationship of teeth with MSF was compared among DL methods. RESULTS: DL methods, such as GoogLeNet, VGG16, VGG19, DarkNet19, and DarkNet53, were used to evaluate the contact relationship between MMT and MSF, and 85.89% accuracy was achieved by majority voting. In addition, 88.72%, 81.19%, 89.39%, and 83.14% accuracy rates were obtained in right fMMT, right sMMT, left fMMT, and left sMMT, respectively. CONCLUSION: DL models showed high accuracy values in detecting the relationship of fMMT and sMMT with MSF.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

A giant peripheral ossifying fibroma of the maxilla with extreme difficulty in clinical differentiation from malignancy: a case report and review of the literature.

BACKGROUND: Peripheral ossifying fibroma is a nonneoplastic inflammatory hyperplasia that originates in the periodontal ligament or periosteum in response to chronic mechanical irritation. Peripheral ossifying fibroma develops more commonly in young females as a solitary, slow-growing, exophytic nodular mass of the gingiva, no more than 2 cm in diameter. While various synonyms have been used to refer to peripheral ossifying fibroma, very similar names have also been applied to neoplastic diseases that are pathologically distinct from peripheral ossifying fibroma, causing considerable nomenclatural confusion. Herein, we report our experience with an unusual giant peripheral ossifying fibroma with a differential diagnostic challenge in distinguishing it from a malignancy. CASE PRESENTATION: A 68-year-old Japanese male was referred to our department with a suspected gingival malignancy presenting with an elastic hard, pedunculated, exophytic mass 60 mm in diameter in the right maxillary gingiva. In addition to computed tomography showing extensive bone destruction in the right maxillary alveolus, positron emission tomography with computed tomography revealed fluorodeoxyglucose hyperaccumulation in the gingival lesion. Although these clinical findings were highly suggestive of malignancy, repeated preoperative biopsies showed no evidence of malignancy. Since even intraoperative frozen histological examination revealed no malignancy, surgical resection was performed in the form of partial maxillectomy for benign disease, followed by thorough curettage of the surrounding granulation tissue and alveolar bone. Histologically, the excised mass consisted primarily of a fibrous component with sparse proliferation of atypical fibroblast-like cells, partly comprising ossification, leading to a final diagnosis of peripheral ossifying fibroma. No relapse was observed at the 10-month follow-up. CONCLUSIONS: The clinical presentation of giant peripheral ossifying fibromas can make the differential diagnosis from malignancy difficult. Proper diagnosis relies on recognition of the characteristic histopathology and identification of the underlying chronic mechanical stimuli, while successful treatment mandates complete excision of the lesion and optimization of oral hygiene. Complicated terminological issues associated with peripheral ossifying fibroma require appropriate interpretation and sufficient awareness of the disease names to avoid diagnostic confusion and provide optimal management.

The impact of maxillary dimensions on determining surgical approach of fungal ball in the maxillary sinus.

Endoscopic middle meatal antrostomy (MMA) is commonly used for maxillary sinus (MS) fungal ball removal. For challenging cases involving anterior or inferior recess, an additional inferior meatal approach (IMA) might be needed. We analyzed the differences in MS dimensions on CT scans according to the surgical approach to suggest preoperative variables that could facilitate an additional IMA. CT scans of 281 adult patients who underwent ESS for the MS fungal ball (139 MMA, 62 MMA & IMA) were evaluated for comparative analysis of 8 MS measurements based on the surgical approach. Complete removal was achieved in all cases. Age and sex didn't differ significantly (p > 0.05). The maximum distances between the anterior-posterior walls, the inferior ostium border to the lateral recess, and the ostium to the inferior wall of the MS were statistically greater in the MMA & IMA group compared to the MMA group (p = 0.003, p = 0.005, and p = 0.010, respectively), especially among females. This study underscores the clinical importance of specific measurements-anterior to posterior wall, medial wall to lateral recess, and ostium to inferior wall of the maxillary sinus-for guiding optimal surgical approaches in MS lesions.

Nasal profile changes after LeFort I osteotomy (maxillary advancement) with and without ANS reduction in class III skeletal patients: a study protocol for a randomized clinical trial.

BACKGROUND: Dentofacial malformation is a common condition that affects a significant portion of the population, resulting in functional and aesthetic defects. Orthognathic surgeries, such as LeFort I osteotomy, are performed to correct these abnormalities. However, the impact of these surgeries on nasal profile changes remains unclear. Additionally, the role of anterior nasal spine (ANS) reduction in maxillary advancement surgeries of 3-5 mm range is yet to be determined. This study aims to investigate the effect of ANS reduction on soft tissue profile changes following LeFort I osteotomy with a maxillary advancement range of 3-5 mm in class III skeletal patients. The hypothesis is that the changes in nasolabial angle and upper lip length will not significantly differ between patients who undergo LeFort I osteotomy with and without ANS reduction. METHOD AND DESIGN: This study is designed as a randomized controlled trial. A total of 26 class III skeletal patients with maxillofacial abnormalities will be recruited from the maxillofacial clinic of Bu-Ali and Farahikhtegan Hospitals in Tehran, Iran. Patients meeting the inclusion criteria will be randomly assigned to two groups: one group will undergo LeFort I osteotomy with ANS reduction, and the other group will undergo LeFort I osteotomy without ANS reduction. The soft tissue profile changes, specifically the nasolabial angle and upper lip length, will be evaluated and compared between the two groups. DISCUSSION: Achieving facial harmony through orthognathic surgery requires careful planning and consideration of the impact on surrounding soft tissue. The primary objective is to predict and plan for the effects on the nasolabial region. LeFort I osteotomy is a common procedure used to correct dentofacial deformities, particularly in class III patients. Maxillary advancement during this surgery can lead to changes in nasal tip position, width, and rotation, potentially due to repositioning of the anterior nasal spine and soft tissue dissection. In this study, soft tissue changes will be assessed in non-growing class III patients using cephalometric radiographs. The impact of reducing the anterior nasal spine (ANS) on nasal profile changes will be investigated for maxillary advancements of 3-5 mm. Objective measurements and patient-reported outcomes will be evaluated to gain insights into the aesthetic outcomes of orthognathic surgery. The findings will provide valuable guidance for treatment decisions and alternative options based on expected nasal profile changes. TRIAL REGISTRATION: This project was registered at The Iranian Registry of Clinical Trials (Identifier No. IRCT20210928052625N1, Website: https://www.irct.ir/trial/59171 ) and Open Science Framework (OSF) (Registration https://doi.org/10.17605/OSF.IO/X3HD4 ). 2021-06-09.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

Micro-computed tomography (micro-CT) evaluation of root canal morphology in immature maxillary third molars.

The endodontic treatment of immature permanent teeth with necrotic pulp is a significant clinical challenge. The success of regenerative endodontic procedure is highly dependent on disinfection of the root canal and an accurate anatomical knowledge of the root canal. The aim of this study was to use micro-computed tomography (micro-CT) analysis to investigate the configuration of root canals in the upper permanent third maxillary molars with incomplete root development in their coronal, apical and middle third portions. Thirty immature third permanent maxillary molars were scanned using a micro-CT system. Then, we measured the diameters and areas of the root canal in the coronal, middle and apical third of the roots. The ratio between the long and short diameter of each root canal was then calculated and the canals were divided into several groups: round, oval, long oval, flat and irregular. The round configuration was not observed in the distobuccal and mesiobuccal roots in any of their anatomical regions. Oval and long oval canals predominated in the distobuccal root. The greatest variations were observed in the mesiobuccal root, with the ribbon-shaped canal predominating in the middle region and an irregular shape in the apical region. In the coronal region of the palatal canal, the round configuration predominated; in the middle third, we observed an almost equivalent distribution between round and oval configurations; apically, the oval shape predominated. In conclusion, we observed significant complexity and variation in the morphology and configuration of root canals in immature permanent molars, thus generating additional obstacles for the success of regenerative endodontics.

Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Maxillary Canine Impaction: Assessing the Influence of Maxillary Anatomy Using Cone Beam Computed Tomography.

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated. RESULTS In the palatal width measurement from the mid-root variable, the measurement of labially positioned canines was significantly lower than the control group (P<0.05). In terms of intermolar width, the labial positioned impacted canines' values were lower than in the control group. There was a significant difference in terms of the perimeter variable and both palatinally and labially positioned impacted canines were significantly lower than in the control group (P<0.05). All parameters were compared according to sex, and measurements of male patients were significantly higher than in female patients (P<0.05). CONCLUSIONS A labially impacted canine was strongly linked to a decrease in mid-root palatal and intermolar widths. Additionally, impacted canines positioned both palatally and labially were found to result in a reduced arch perimeter. Moreover, male patients with impacted canines exhibited notably greater anatomical measurements compared to female patients.

Craniomandibular transverse tomographic evaluation after anterior open bite orthodontic treatment with miniplates anchorage.

BACKGROUND: Skeletal anterior open bite (SAOB) represents one of the most complex and challenging malocclusions in orthodontics. Orthodontic treatment supported by miniplates enable to reduce the need for orthognathic surgery. Transverse dimension may be affected by intrusion biomechanics. This study aims to assess transverse bone alterations in patients with SAOB who underwent orthodontic treatment with absolute anchorage using four miniplates. METHODS: A total of 32 patients of both sexes, with an average age of 33.8 years, diagnosed with SAOB and treated orthodontically with four miniplates (one in each hemiarch), were selected for this study. Tomographic examinations were performed before (T1) and after (T2) orthodontic treatment. Linear measurements (width of the maxillary base, maxillary alveolar, maxillary root, maxillary dental cusp, mandibular alveolar) and angular measurements (maxillary intermolar angle) were assessed in these images. The Shapiro-Wilks normality tests were applied to verify data distribution, and the paired t-test was used to compare the initial and final measures obtained. RESULTS: Among the evaluated parameters, the maxillary alveolar width, maxillary dental cusp width, mandibular alveolar cusp width, and intermolar angle showed statistically significant differences between T1 and T2 (p < 0.05). However, maxillary base and maxillary root widths showed no significant difference (p > 0.05). CONCLUSIONS: Intrusion and distalization with miniplates in SAOB therapy may lead to significant expansive changes, due to molars cusps width and buccal inclination increase restricted at the alveolar level.

Comparison Between Corticocancellous Allograft and Bovine Xenograft for Sinus Augmentation: A Radiographic, Histologic, and Histomorphometric Clinical Study.

Sinus floor augmentation is one of the most common approaches to obtain sufficient bone availability for placing implants in cases with severe bone atrophy in the posterior maxilla. Several bone substitutes are indicated for sinus augmentation, but they may achieve different clinical outcomes. This study aims to compare bovine bone mineral (BBM) with freeze-dried bone allograft (FDBA) in a two-stage lateral window sinus grafting approach. Twenty patients received a lateral window sinus elevation with either FDBA or BBM. Postoperative graft height was measured with CBCT. Implants were placed 6 months later, at which time biopsy samples were taken for histologic analysis and new CBCT scans were performed to measure graft height. The mean height reduction at 6 months was 20.27% ± 4.94% for FDBA samples and 5.36% ± 2.41% for BBM samples. The histologic analysis revealed a mean ratio of newly formed bone of 43.70% ± 5.29% for the FDBA group and 38.11% ± 4.03% for the BBM group. The FDBA group also showed a higher amount of residual biomaterial (17.25% ± 10.10%) and connective tissue (14.63% ± 4.38%) compared to the BBM group (15.53% ± 5.42% and 13.11% ± 4.42%, respectively). The differences between groups were statistically significant for the height reduction and newly formed bone (P ≤ .05) but not for the amounts of residual biomaterial and nonmineralized connective tissue (P ≥ .05). Six months after performing a lateral window sinus elevation, the percentage of newly formed bone was significantly higher when using FDBA than when using BBM, although the graft height reduction was also significantly higher for the FDBA group.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Anatomical Possibilities of the Alveolar Bone at the Upper Second Premolar Level.

Background and Objectives: The upper posterior teeth are typically regarded as being exclusively inferior to the maxillary sinus (MS). The expansion of the nasal fossa above the maxillary alveolar base (MAB) needs better investigation. The hypothesis was raised that the MAB in the upper premolar region, which is usually addressed by surgeons for the elevation of the antral floor, is not exclusively beneath the MS. Therefore, we aimed to document the possible upper relations of the MAB as antral, nasal, or both. Materials and Methods: A total of 145 CBCT scans were used to study four types of MAB: type 1-antral; type 2-antral with a palatal recess; type 3-antral and nasal; type 4-nasal. In type 2, the orthoradial width of the alveolar bone, the rectilinear width of the antral floor, and the maximum depth of the palatal recess were measured. For type 3, the MAB width and the straight widths of the antral and nasal segments of the MAB were measured. Results: Type 1 was found in 67.24%, type 2 in 13.45%, type 3 in 16.21%, and type 4 in 3.1% of the 290 MSs investigated. Palatal recesses were found in 11.72% of the MSs on the right side and 15.17% of the MSs on the left side. Types 1 and 2 exhibited strongly statistically significant bilateral symmetry (Pearson's Chi2 = 86.42, p < 0.001). Type 3 correlated equally with contralateral types 1 and 3. The bilateral symmetry for types 1-3 was stronger in the males (Pearson's Chi2 = 47.83, p < 0.001) than in the females (Pearson's Chi2 = 56.96, p < 0.001). There were no statistically significant associations between sex and the unilateral anatomical type. Conclusions: The MAB in the upper second premolar area should not be considered to be exclusively antral during surgeries or in anatomical teaching.

Micro-computed tomographic analysis of the morphology of maxillary lateral incisors.

OBJECTIVE: This study aimed to investigate the morphology of maxillary lateral incisors (MxLI) using micro-computed tomography (micro-CT). MATERIALS AND METHODS: The root canal configurations (RCC) of maxillary lateral incisors (MxLI) of a mixed Swiss-German population were examined using micro-CT, 3D imaging, and a 4-digit system code indicating the main root canal from coronal to apical thirds and the main foramina number. RESULTS: The most frequently observed RCC of MxLI were 1-1-1/1 (Vertucci I/Ve I, 80.0%), 1-1-2/2 (Ve V, 7.3%), 1-2-1/1 (Ve III, 6.4%), 2-1-1/1 (Ve II, 1.8%), and 1-1-1/2 (1.8%)(n = 110). Three additional RCC were observed less frequently (0.9%). The MxLI showed one physiological foramen in 89.1%, two in 9.1%, and seldom three (1.8%). Most accessory canals were identified in the apical third of a root (20.0%), and no accessory canals in 72.7% of the samples. CONCLUSIONS: Detailed information on the internal morphology of MxLI of a Swiss-German population is given. The most frequently observed RCC of MxLI is 1-1-1/1 (Ve I). However, accessory canals may occur in all apical thirds, and 20% of all teeth investigated showed a challenging RCC for clinical treatment. CLINICAL RELEVANCE: This study offers clinicians comprehensive data on MxLI morphology, emphasizing the significance of understanding varied RCC and accessory canal presence for improving root canal treatment outcomes. Over 25% of teeth exhibited complex RCC or accessory canals, influencing decisions during root canal treatment.

Biomechanical behavior of three maxillary expanders in cleft lip and palate: a finite element study.

This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 µÎµ. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

Site selection of micro-implant anchorages in the infrazygomatic crest in adult orthodontic patients.

OBJECTIVES: To determine the optimal placement of miniscrews, this study compared adult male and female patients in terms of cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest region. METHODS: The cone beam computed tomography imaging data of 200 patients (20-30 years old; 100 males and 100 females) were collected. The right maxillary posterior teeth in the sagittal plane were divided into six levels from proximal to distal, and three measurement sites were positioned at vertical distances of 8, 10, and 12 mm from the cementum. Cortical bone density, cortical bone thickness, and available bone width were measured in 18 measurement sites in the infrazygomatic crest and analyzed statistically. RESULTS: The highest cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest in adult male and female patients were at the level of the interradicular space between the maxillary second premolar and maxillary first molar. The bone cortical density and thickness increased with vertical height, whereas the available bone width decreased with increasing vertical height. Differences were observed in cortical bone density, cortical bone thickness, and available bone width between adult male and female patients. CONCLUSIONS: The optimal implantation sites of the micro-implant anchorages in the infrazygomatic crest were at the level of the interradicular space between the maxillary second premolar and the maxillary first molar, and the vertical height of the optimal implantation site in males was appropriately higher than that in females.

Clinical efficacy of intraoral ultrasonography versus transgingival probing for measurement of gingival thickness in different gingival biotypes: a clinical trial.

BACKGROUND: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes. MATERIALS AND METHODS: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC). RESULTS: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement. CONCLUSION: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT. TRIAL REGISTRATION: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1).