Elucidation of the electron transfer environment in the MMOR FAD-binding domain from Methylosinus sporium 5.

By facilitating electron transfer to the hydroxylase diiron center, MMOR-a reductase-serves as an essential component of the catalytic cycle of soluble methane monooxygenase. Here, the X-ray structure analysis of the FAD-binding domain of MMOR identified crucial residues and its influence on the catalytic cycle.

Characterization of a Copper-Chelating Natural Product from the Methanotroph Methylosinus sp. LW3.

Methanobactins (Mbns) are ribosomally produced, post-translationally modified peptidic natural products that bind copper with high affinity. Methanotrophic bacteria use Mbns to acquire copper needed for enzymatic methane oxidation. Despite the presence of Mbn operons in a range of methanotroph and other bacterial genomes, few Mbns have been isolated and structurally characterized. Here we report the isolation of a novel Mbn from the methanotroph Methylosinus (Ms.) sp. LW3. Mass spectrometric and nuclear magnetic resonance spectroscopic data indicate that this Mbn, the largest characterized to date, consists of a 13-amino acid backbone modified to include pyrazinedione/oxazolone rings and neighboring thioamide groups derived from cysteine residues. The pyrazinedione ring is more stable to acid hydrolysis than the oxazolone ring and likely protects the Mbn from degradation. The structure corresponds exactly to that predicted on the basis of the Ms. sp. LW3 Mbn operon content, providing support for the proposed role of an uncharacterized biosynthetic enzyme, MbnF, and expanding the diversity of known Mbns.

MMOD-induced structural changes of hydroxylase in soluble methane monooxygenase.

Soluble methane monooxygenase in methanotrophs converts methane to methanol under ambient conditions. The maximum catalytic activity of hydroxylase (MMOH) is achieved through the interplay of its regulatory protein (MMOB) and reductase. An additional auxiliary protein, MMOD, functions as an inhibitor of MMOH; however, its inhibitory mechanism remains unknown. Here, we report the crystal structure of the MMOH-MMOD complex from Methylosinus sporium strain 5 (2.6 Å). Its structure illustrates that MMOD associates with the canyon region of MMOH where MMOB binds. Although MMOD and MMOB recognize the same binding site, each binding component triggers different conformational changes toward MMOH, which then respectively lead to the inhibition and activation of MMOH. Particularly, MMOD binding perturbs the di-iron geometry by inducing two major MMOH conformational changes, i.e., MMOH ß subunit disorganization and subsequent His147 dissociation with Fe1 coordination. Furthermore, 1,6-hexanediol, a mimic of the products of sMMO, reveals the substrate access route.

Repurposed HisC Aminotransferases Complete the Biosynthesis of Some Methanobactins.

Methanobactins (Mbns) are ribosomally produced, post-translationally modified bacterial natural products with a high affinity for copper. MbnN, a pyridoxal 5'-phosphate-dependent aminotransferase, performs a transamination reaction that is the last step in the biosynthesis of Mbns produced by several Methylosinus species. Our bioinformatic analyses indicate that MbnNs likely derive from histidinol-phosphate aminotransferases (HisCs), which play a key role in histidine biosynthesis. A comparison of the HisC active site with the predicted MbnN structure suggests that MbnN's active site is altered to accommodate the larger and more hydrophobic substrates necessary for Mbn biosynthesis. Moreover, we have confirmed that MbnN is capable of catalyzing the final transamination step in Mbn biosynthesis in vitro and in vivo. We also demonstrate that without this final modification, Mbn exhibits significantly decreased stability under physiological conditions. An examination of other Mbns and Mbn operons suggests that N-terminal protection of this family of natural products is of critical importance and that several different means of N-terminal stabilization have evolved independently in Mbn subfamilies.

Biochemical Properties and Phylogeny of Hydroxypyruvate Reductases from Methanotrophic Bacteria with Different C1-Assimilation Pathways.

In the aerobic methanotrophic bacteria Methylomicrobium alcaliphilum 20Z, Methylococcus capsulatus Bath, and Methylosinus trichosporium OB3b, the biochemical properties of hydroxypyruvate reductase (Hpr), an indicator enzyme of the serine pathway for assimilation of reduced C1-compounds, were comparatively analyzed. The recombinant Hpr obtained by cloning and heterologous expression of the hpr gene in Escherichia coli catalyzed NAD(P)H-dependent reduction of hydroxypyruvate or glyoxylate, but did not catalyze the reverse reactions of D-glycerate or glycolate oxidation. The absence of the glycerate dehydrogenase activity in the methanotrophic Hpr confirmed a key role of the enzyme in utilization of C1-compounds via the serine cycle. The enzyme from Ms. trichosporium OB3b realizing the serine cycle as a sole assimilation pathway had much higher special activity and affinity in comparison to Hpr from Mm. alcaliphilum 20Z and Mc. capsulatus Bath assimilating carbon predominantly via the ribulose monophosphate (RuMP) cycle. The hpr gene was found as part of gene clusters coding the serine cycle enzymes in all sequenced methanotrophic genomes except the representatives of the Verrucomicrobia phylum. Phylogenetic analyses revealed two types of Hpr: (i) Hpr of methanotrophs belonging to the Gammaproteobacteria class, which use the serine cycle along with the RuMP cycle, as well as of non-methylotrophic bacteria belonging to the Alphaproteobacteria class; (ii) Hpr of methylotrophs from Alpha- and Betaproteobacteria classes that use only the serine cycle and of non-methylotrophic representatives of Betaproteobacteria. The putative role and origin of hydroxypyruvate reductase in methanotrophs are discussed.

Ammonium conversion and its feedback effect on methane oxidation of Methylosinus sporium.

Ammonium (NH4+) is not only nitrogen source that can support methanotrophic growth, but also it can inhibit methane (CH4) oxidation by competing with CH4 for the active site of methane monooxygenase. NH4+ conversion and its feedback effect on the growth and activity of methanotrophs were evaluated with Methylosinus sporium used as a model methanotroph. Nitrogen sources could affect the CH4-derived carbon distribution, which varied with incubation time and nitrogen concentrations. More CH4-derived carbon was incorporated into biomass in the media with NH4+-N, compared to nitrate-nitrogen (NO3--N), as sole nitrogen source at the nitrogen concentrations of 10-18 mmol L-1. Although ammonia (NH3) oxidation activity of methanotrophs was considerably lower, only accounting for 0.01-0.06% of CH4 oxidation activity in the experimental cultures, NH4+ conversion could lead to the pH decrease and toxic intermediates accumulation in the their habits. Compared with NH4+, nitrite (NO2-) accumulation in the NH4+ conversion of methanotroph had stronger inhibition on its activity, especially the joint inhibition of NO2- accumulation and the pH decrease during the NH4+-N conversion. These results suggested that more attention should be paid to the feedback effects of NH4+ conversion by methanotrophs to understand effects of NH4+ on CH4 oxidation in the environments.

Non-linear dynamics of stable carbon and hydrogen isotope signatures based on a biological kinetic model of aerobic enzymatic methane oxidation.

The non-linear dynamics of stable carbon and hydrogen isotope signatures during methane oxidation by the methanotrophic bacteria Methylosinus sporium strain 5 (NCIMB 11126) and Methylocaldum gracile strain 14 L (NCIMB 11912) under copper-rich (8.9 µM Cu(2+)), copper-limited (0.3 µM Cu(2+)) or copper-regular (1.1 µM Cu(2+)) conditions has been described mathematically. The model was calibrated by experimental data of methane quantities and carbon and hydrogen isotope signatures of methane measured previously in laboratory microcosms reported by Feisthauer et al. [ 1 ] M. gracile initially oxidizes methane by a particulate methane monooxygenase and assimilates formaldehyde via the ribulose monophosphate pathway, whereas M. sporium expresses a soluble methane monooxygenase under copper-limited conditions and uses the serine pathway for carbon assimilation. The model shows that during methane solubilization dominant carbon and hydrogen isotope fractionation occurs. An increase of biomass due to growth of methanotrophs causes an increase of particulate or soluble monooxygenase that, in turn, decreases soluble methane concentration intensifying methane solubilization. The specific maximum rate of methane oxidation υm was proved to be equal to 4.0 and 1.3 mM mM(-1) h(-1) for M. sporium under copper-rich and copper-limited conditions, respectively, and 0.5 mM mM(-1) h(-1) for M. gracile. The model shows that methane oxidation cannot be described by traditional first-order kinetics. The kinetic isotope fractionation ceases when methane concentrations decrease close to the threshold value. Applicability of the non-linear model was confirmed by dynamics of carbon isotope signature for carbon dioxide that was depleted and later enriched in (13)C. Contrasting to the common Rayleigh linear graph, the dynamic curves allow identifying inappropriate isotope data due to inaccurate substrate concentration analyses. The non-linear model pretty adequately described experimental data presented in the two-dimensional plot of hydrogen versus carbon stable isotope signatures.

Comparative enzyme inhibitive methanol production by Methylosinus sporium from simulated biogas.

Methane in a simulated biogas converting to methanol under aerobic condition was comparatively assessed by inhibiting the activity of methanol dehydrogenase (MDH) of Methylosinus sporium using phosphate, NaCl, NH4Cl or EDTA in their varying concentrations. The highest amount of methane was indistinguishably diverted at the typical conditions regardless of the types of inhibitors: 35°C and pH 7 under a 0.4% (v/v) of biogas, specifically for <40 mM phosphate, 50 mM NaCl, 40 mM NH4Cl or 150 µM EDTA. The highest level of methanol was obtained for the addition of 40 mM phosphate, 100 mM NaCl, 40 mM NH4Cl or 50 µM EDTA. In other words, 0.71, 0.60, 0.66 and 0.66 mmol methanol was correspondingly generated by the oxidation of 1.3, 0.67, 0.74 and 1.3 mmol methane. It gave a methanol conversion rate of 54.7%, 89.9%, 89.6% and 47.8%, respectively. Among them, the maximum rate of methanol production was observed at 6.25 µmol/mg h for 100 mM NaCl. Regardless of types or concentrations of inhibitors differently used, methanol production could be nonetheless identically maximized when the MDH activity was limitedly hampered by up to 35%.

Role of tyrosine residue in methane activation at the dicopper site of particulate methane monooxygenase: a density functional theory study.

Methane hydroxylation at the dinuclear copper site of particulate methane monooxygenase (pMMO) is studied by using density functional theory calculations. The electronic, structural, and reactivity properties of a possible dinuclear copper species (µ-oxo)(µ-hydroxo)Cu(II)Cu(III) are discussed with respect to the C-H bond activation of methane. We propose that the tyrosine residue in the second coordination sphere of the dicopper site donates an H atom to the µ-η(2):η(2)-peroxoCu(II)Cu(II) species and the resultant (µ-oxo)(µ-hydroxo)Cu(II)Cu(III) species can hydroxylate methane. This species for methane hydroxylation is more favorable in reactivity than the bis(µ-oxo)Cu(III)Cu(III) species. The H-atom transfer or proton-coupled electron transfer from the tyrosine residue can reasonably induce the O-O bond dissociation of the µ-η(2):η(2)-peroxoCu(II)Cu(II) species to form the reactive (µ-oxo)(µ-hydroxo)Cu(II)Cu(III) species, which is expected to be an active species for the conversion of methane to methanol at the dicopper site of pMMO. The rate-determining step for the methane hydroxylation is the C-H cleavage, which is in good agreement with experimental KIE values reported so far.

Duplication of the mmoX gene in Methylosinus sporium: cloning, sequencing and mutational analysis.

The soluble methane monooxygenase (sMMO) is a key enzyme for methane oxidation, and is found in only some methanotrophs, including Methylosinus sporium 5. sMMO expression is regulated at the level of transcription from a sigma(54) promoter by a copper-switch, and is only expressed when the copper-to-biomass ratio during growth is low. Extensive phylogenetic and genetic analyses of sMMOs and other soluble di-iron monooxygenases reveal that these enzymes have only been acquired relatively recently through horizontal gene transfer. In this study, further evidence of horizontal gene transfer was obtained, through cloning and sequencing of the genes encoding the sMMO enzyme complex plus the regulatory genes mmoG and mmoR, and identification of a duplicate copy of the mmoX gene in Ms. sporium. mmoX encodes the alpha subunit of the hydroxylase of the sMMO enzyme, which constitutes the active site (Prior & Dalton, 1985). The mmoX genes were characterized at the molecular and biochemical levels. Although both copies were transcribed, only mmoX copy 1 was essential for sMMO activity. Construction of an sMMO(-) mutant by marker-exchange mutagenesis gave some possible insights into the role of the water-soluble pigment in siderophore-mediated iron acquisition. Finally, the amenability of Ms. sporium to genetic manipulation was demonstrated by complementing the sMMO(-) mutant by heterologous expression of sMMO genes from Methylosinus trichosporium OB3b and Methylococcus capsulatus (Bath), and it was shown that Ms. sporium could be used as an alternative model organism for molecular analysis of MMO regulation.

Functional expression of the particulate methane mono-oxygenase gene in recombinant Rhodococcus erythropolis.

In order to construct an expression system for the particulate methane mono-oxygenase (pMMO) gene (pmo), the structural gene cluster pmoCAB amplified from Methylosinus trichosporium OB3b was inserted into a shuttle vector pBS305 under the control of a dsz promoter and transformed into Rhodococcus erythropolis LSSE8-1. A stable transformant was successfully obtained using ethane as the sole carbon source. Fluorescence in situ hybridization results showed that the dsz promoter allowed the pmo genes to be transcribed in the recombinant strain. The effects of Cu2+ and Zn2+ concentrations on cell growth and pMMO activity in ethane-containing medium were examined. It was discovered that 7.5 microM Cu2+ and 1.8 microM Zn2+ were suitable to achieve high cell concentration and pMMO activity, but the amount of methanol accumulated during methane oxidation by the recombinant strain was still low.

[Continuous biosynthesis of epoxypropane in a methanotrophic attached-films reactor].

Using a fluidized bed as immobilization system, mixed culture methanotrophic attached-films were developed on diatomite particles. The Methane Monooxygenase (MMO) activity was found to increase obviously as soon as the lag phase ended. Greater than 90% of the MMO activity in the bed was attached. Biofilm concentration of 3.3-3.7 mg dry weight cell/g DS was observed. Batch experiments were performed to explore the possibility of producing epoxypropane by a cooxidation process. The effect of methane on the oxidation of propene to epoxypropane and the effect of propene on the growth of methanotroph were also studied. In continuous experiments, optimum mixed gaseous substrates (methane: 35%; propene: 20%; oxygen: 45%) were continuously circulated through the fluidized bed reactor to remove product. Initial epoxypropane productivity was 110-150 mumol/d. The bioreactor operated continuously for 25 d without obvious loss of epoxypropane productivity.

Molecular analysis of the pmo (particulate methane monooxygenase) operons from two type II methanotrophs.

The particulate methane monooxygenase gene clusters, pmoCAB, from two representative type II methanotrophs of the alpha-Proteobacteria, Methylosinus trichosporium OB3b and Methylocystis sp. strain M, have been cloned and sequenced. Primer extension experiments revealed that the pmo cluster is probably transcribed from a single transcriptional start site located 300 bp upstream of the start of the first gene, pmoC, for Methylocystis sp. strain M. Immediately upstream of the putative start site, consensus sequences for sigma(70) promoters were identified, suggesting that these pmo genes are recognized by sigma(70) and negatively regulated under low-copper conditions. The pmo genes were cloned in several overlapping fragments, since parts of these genes appeared to be toxic to the Escherichia coli host. Methanotrophs contain two virtually identical copies of pmo genes, and it was necessary to use Southern blotting and probing with pmo gene fragments in order to differentiate between the two pmoCAB clusters in both methanotrophs. The complete DNA sequence of one copy of pmo genes from each organism is reported here. The gene sequences are 84% similar to each other and 75% similar to that of a type I methanotroph of the gamma-Proteobacteria, Methylococcus capsulatus Bath. The derived proteins PmoC and PmoA are predicted to be highly hydrophobic and consist mainly of transmembrane-spanning regions, whereas PmoB has only two putative transmembrane-spanning helices. Hybridization experiments showed that there are two copies of pmoC in both M. trichosporium OB3b and Methylocystis sp. strain M, and not three copies as found in M. capsulatus Bath.