Development of a RP-HPLC method for simultaneous determination of atenolol, metoprolol tartrate and phenol red for in-situ rat intestinal perfusion studies.

Single-pass intestinal perfusion (SPIP) method is a widely used experimental model to determine the intestinal permeability of drugs. These studies are performed in the presence of a reference standard (metoprolol, MT) and a zero permeability marker (phenol red, PR). Therefore, it is important to develop a validated method for simultaneous determination of the investigated compound along with MT and PR. The aim of this study was to develop a reversed phase high-performance liquid chromatography (RP-HPLC) method with UV-detection for the simultaneous determination of atenolol (ATN), MT, and PR in the perfusion medium used in SPIP experiments. Separation of compounds were performed using an InertSustain C18 (250 × 4.6 mm, 5 µm) HPLC column at 35 °C. The mobile phase was a mixture of acetonitrile and phosphate buffer (pH 7.0, 12.5 mM) in gradient elution, and was delivered at a flow rate of 1 mL/min. The acetonitrile ratio of the mobile phase increased linearly from 10 to 35 % over 15 min. The injection volume was 20 µL, and ATN, MT and PR were detected at 224 nm. The retention times under optimum HPLC conditions were 5.028 min, 12.401 min, and 13.507 min for ATN, MT and PR, respectively. The developed RP-HPLC method was validated for selectivity, specificity, calibration curve and range, accuracy and precision, carry-over effect, stability, reinjection reproducibility, recovery and robustness. The method was linear for ATN (0.76-50 µg/mL), MT (1.14-50 µg/mL), and PR (0.47-20 µg/mL) with determination coefficients of 0.9999, 0.9994 and 0.9998, respectively. The results obtained for all validation parameters of the developed RP-HPLC method met the required limits of the ICH M10 Guideline.

Design of Experimental Approach for Development of Rapid High Performance Liquid Chromatographic Process for Simultaneous Estimation of Metoprolol, Telmisartan, and Amlodipine from Formulation: Greenness and Whiteness Evaluation.

The design of an experimental approach, the Box-Behnken design, was implemented to optimize the chromatographic condition to develop a rapid HPLC procedure for quantification of a ternary mixture of metoprolol (MET), telmisartan (TEL), and amlodipine (AML) from the formulation. The perturbation plots, contour, and 3D response surface pictures were developed to study the impact of each variable on the analytes' retention time and the probable interaction between the parameters with fewer chromatographic runs. The optimized HPLC method separated the three analytes within 5 min with excellent selectivity and peak shape on a Zorbax C18 HPLC column using acetonitrile and phosphate buffer (20 mM, pH 5.8) with isocratic elution at a 1.1 mL/min flowrate. A wavelength 230 nm was utilized to monitor the elute. The validation of proposed method demonstrated a wide linearity range of 10-200 µg/mL for MET and TEL and 5-50 µg/mL for AML along with an excellent correlation coefficient. The correctness of the HPLC approach was further confirmed by excellent recovery of the added amount of analytes utilizing the standard addition technique. The recommended HPLC approach was employed safely for quality assurance of the formulation, because the evaluation of the method's greenness and whiteness confirmed the environmentally friendly nature of the approach.

Utility of synchronous fluorimetry for the concurrent quantitation of metoprolol and ivabradine.

Metoprolol combined with ivabradine have been determined up to nanogram level simultaneously relied on the synchronous fluorescence spectra. First derivative amplitudes of the synchronous spectrofluorimetric spectra are recorded at Δλ = 40 nm using ethanol as diluting solvent. Metoprolol can be measured at 286 nm which is the zero-crossing point of ivabradine, and the later can be measured at 296 nm. The calibration plots were found to be linear over the ranges of concentrations: 100.0-1000.0 ng/mL and 10.0-200.0 ng/mL for metoprolol and ivabradine, respectively. Validation of the procedure was performed using the International Council of Harmonization guidelines. Values of LODs were found to be 28.89, 2.80 ng/mL and LOQs were 87.56, 8.49 ng/mL for metoprolol and ivabradine, respectively. As the two drugs are co-administered safely and effectively to reduce heart rate, angina attacks, the current methodology is utilized for the concurrent analysis of them in their single ingredient pharmaceutical preparations, synthetic mixtures, and biological fluids. The designed method, being cost-effective and simple procedure, is the first method for metoprolol and ivabradine simultaneous analysis. The results agreed statistically with the comparison methods.

Quality control and drug-drug interactions between commercially available Metoprolol and Glimepiride tablets

Abstract Quality is paramount and needs to be maintained throughout the shelf life of pharmaceuticals. The current study aimed to evaluate the quality, potency, and drug-drug interaction in an in vivo animal model by using two drugs, namely, metoprolol and glimepiride. Tablets were selected for their physical characteristics, such as shape, size, and color. Quality control tests, such as weight variation, hardness, friability, and disintegration tests, and invitro drug release studies were performed as per USP. Drug-drug interaction and in vivo studies were carried out according to the standard protocol of the animal ethics committee. Quality control tests of both the tablets were within the specified range. The cumulative release percentages of the drugs were 81.12% and 85.36% for Metoprolol Tartrate and Glimepiride, respectively, in a physiological buffer solution within 1 h. The combination of metoprolol and Glimepiride also significantly decreased the blood glucose level in diabetic animals. However, the blood glucose level increased in the group receiving metoprolol only, but the difference was not significant. The result suggested that the formulations are safe. However, the chronic use of this combination requires frequent monitoring of blood glucose level to improve its efficacy and for the patient's safety.

Metoprolol and Its Degradation and Transformation Products Using AOPs-Assessment of Aquatic Ecotoxicity Using QSAR.

Pharmaceuticals are found in waterbodies worldwide. Conventional sewage treatment plants are often not able to eliminate these micropollutants. Hence, Advanced Oxidation Processes (AOPs) have been heavily investigated. Here, metoprolol is exposed to UV irradiation, hydrogen peroxide, and ozonation. Degradation was analyzed using chemical kinetics both for initial and secondary products. Photo-induced irradiation enhanced by hydrogen peroxide addition accelerated degradation more than ozonation, leading to complete elimination. Degradation and transformation products were identified by high-performance liquid-chromatography coupled to high-resolution higher-order mass spectrometry. The proposed structures allowed to apply Quantitative Structure-Activity Relationship (QSAR) analysis to predict ecotoxicity. Degradation products were generally associated with a lower ecotoxicological hazard to the aquatic environment according to OECD QSAR toolbox and VEGA. Comparison of potential structural isomers suggested forecasts may become more reliable with larger databases in the future.

Vortex assisted liquid-liquid microextraction based on in situ formation of a natural deep eutectic solvent by microwave irradiation for the determination of beta-blockers in water samples.

In this study, a simple, green, and reliable method combining vortex-assisted liquid-liquid microextraction based on in situ formation of a novel hydrophobic natural deep eutectic solvent (NADES-VA-LLME) and high-performance liquid chromatography (HPLC) was developed for the determination of metoprolol and propranolol in water samples. The novel NADES was synthesized in situ within only 20 s by subjecting the water sample containing azelaic acid and thymol to microwave irradiation at 50 ˚C. Initial studies indicated that a 17:1 ratio of thymol to azelaic acid yielded the highest response for analytes. The influence of 7 parameters, including NADES volume, salt amount, sample pH, vortex time, centrifugation time, microwave time, and temperature, were screened using a 27-3 fractional factorial design. The obtained significant parameters were optimized by response surface methodology employing a Box-Behnken design. The method displayed satisfactory linearity (r=0.9996) for metoprolol and propranolol with limits of detection of 0.2 and 0.1 µg/L, respectively. The relative standard deviation at 2.5, 40, and 80 µg/L levels was lower than 6%, with accuracy in the range of 90.8-100.2%. Enrichment factors were 147.0 and 144.4 for metoprolol and propranolol, respectively. This study demonstrates that the developed in situ NADES-VA-LLME-HPLC technique can be considered as a fast and environmentally friendly alternative for isolation/preconcentration of ß-blockers from water samples.

Dispersive solid-phase extraction of racemic drugs using chiral ionic liquid-metal-organic framework composite sorbent.

Nowadays, enantioseparation of racemic pharmaceuticals in preparations is a prime concern by drug authorities across the globe. In the present work, it was attempted to develop novel enantioselective extraction method for five clinically used drugs (atenolol, propranolol, metoprolol, racecadotril, and raceanisodamine in their tablets) as racemates. The enantioselective solid-liquid extraction of these racemic drugs was carried out successfully by the use of chiral ionic liquid (CIL) in combination with a metal organic framework (MOF) for the first time. The composite CIL@MOF was synthesized from tropine based chiral ionic liquids with L-proline anion ([CnTr][L-Pro], n=3-6) and HKUST-1 type MOF, which was comprehensively characterized before being used as sorbent for enantioselective dispersive solid-liquid extraction. Preliminary selection of appropriate CIL was carried out on thin layer chromatography (TLC); under the joint participation of copper ion in the developing reagent, [C3Tr][L-Pro] ionic liquid showed better resolution performance with ΔRf value of 0.35 between the enantiomers was obtained for racemic atenolol. Moreover, the effect of copper salt dosage, amount of CIL, soli-liquid ratio and extraction time were investigated. The optimal conditions were obtained after thorough investigations; i.e. sample solution: ethanol, elution solvent: methanol, solid-liquid ratio: 12.5 mg:50 mL, amount of copper salt: 8 mg L-1, amount of impregnated CIL: 30% and extraction time of 30 min. As a result, enantiomeric excess values are 90.4%, 95%, 92%, 81.6% and 83.2% for atenolol, propranolol, metoprolol, racecadotril and raceanisodamine, respectively. The developed enantioselective method was validated following ICH guidelines and it was proved to be simple, effective and enantioselective way for separation of racemic pharmaceuticals with similar behaviors.

Simultaneous time-course measurements of metoprolol and α-hydroxyl metoprolol in fingermarks after oral administration by liquid chromatography tandem mass spectrometry.

The aim of this study was to evaluate whether fingerprints are suitable to be applied as the biometric identification samples by testing the orally administered drugs needs to be taken daily. The dosage of BETALOC® was administered to subjects following single and multiple doses and its active ingredient metoprolol and its main metabolite α-hydroxyl metoprolol were selected as the analytes. The subjects washed their hands and pressed fingertips onto glass slides at fixed sampling points (from 1 h to 7 days), and the analytes were extracted using cotton swabs 30 times followed by ultrasonic assistance in 30℃ methanol solution for 5 min with working power of 2000 W after optimization. The drugs in blood were taken from their elbow vein and deproteinized before analysis. Analysis were performed using liquid chromatography-tandem mass spectrometry (LC/MS/MS), and their concentration time course in fingerprints and blood were evaluated and compared. Results showed that metoprolol was detected 1 h after ingestion both in fingerprints and blood, while α-hydroxyl metoprolol was detected from sampling points of 2 h in fingerprint and 3 h in blood, respectively. Drugs could be detected for longer periods in blood than in fingerprint in single dose administration. However, in multiple doses, they could reach a steady detectable state in fingerprints from the fifth day after oral administration, and could serve as a more rapid and simpler alternative for drug analysis. We demonstrate that fingerprints could be applied as the biometric identification samples for orally administered drugs in multiple-doses, and could be applied to drug testing in criminal investigations.

Chiral separation of beta-blockers by high-performance liquid chromatography and determination of bisoprolol enantiomers in surface waters.

Beta-blockers are chiral compounds with enantiomers that have different bioactivity, which means that while one is active, the other can be inactive or even harmful. Due to their high consumption and incomplete degradation in waste water, they may reach surface waters and affect aquatic organisms. To address this issue we developed a chromatographic method suitable for determining beta-blocker enantiomers in surface waters. It was tested on five beta-blockers (acebutolol, atenolol, bisoprolol, labetalol and metoprolol) and validated on bisoprolol enantiomers. Good enantioseparation of all analysed beta-blockers was achieved on the Chirobiotic V column with the mobile phase composed of methanol/acetic acid/triethylamine (100/0.20/0.15 v/v/v) at a flow rate of 0.5 mL/min and column temperature of 45 °C. Method proved to be linear in the concentration range from 0.075 µg/mL to 5 µg/mL, and showed good recovery. The limits of bisoprolol enantiomer detection were 0.025 µg/mL and 0.026 µg/mL and of quantification 0.075 µg/mL and 0.075 µg/mL. Despite its limitations, it seems to be a promising method for bisoprolol enantiomer analysis in surface water samples. Further research could focus on waste water analysis, where enantiomer concentrations may be high. Furthermore, transferring the method to a more sensitive one such as liquid chromatography coupled with tandem mass spectrometry and using ammonium acetate as the mobile phase additive instead of acetic acid and triethylamine would perhaps yield much lower limits of detection and quantification.

Development of a RP-HPLC method for simultaneous determination of reference markers used for in-situ rat intestinal permeability studies.

One of the most common techniques for assessing the intestinal absorption characteristics of drugs is single-pass intestinal perfusion (SPIP) method. Metoprolol tartrate (MT, reference standard) and phenol red (PR, zero permeability marker) are the compounds that are normally used in SPIP studies. The aim of this study was to develop a reverse phase high-performance liquid chromatography (RP-HPLC) method combined with UV-detection for the simultaneous determination of MT and PR in the perfusion medium used in SPIP experiments. Elution was performed using a Restek Raptor C18 column (5 µm, 4.6 mm × 250) at a temperature of 25 °C. The mixture of the mobile phase consisted of (MeOH):(Phosphate buffer solution, PBS), (20 mM, pH 3.0 adjusted with ortho-phosphoric acid),(55:45, v/v). Flow rate and column temperature were set at 1.2 mL min-1 and 25 °C, respectively. MT and PR were injected as 20 µL into the HPLC system. UV detection was performed at 227 nm. The obtained retention times were reported as 2.89 and 3.80 min for MT and PR, respectively. The developed RP-HPLC method was validated according to Q2(R1) guideline of The International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH). The method was linear within the range of 2-50 µg mL-1 for PR and 10-75 µg mL-1 for MT. The developed RP-HPLC method was successfully applied on determination of MT and PR in perfusion medium. The developed method could be helpful for researchers working on in-situ rat intestinal permeability studies and it could be easily modified on further studies.

Interrogation of CYP2D6 Structural Variant Alleles Improves the Correlation Between CYP2D6 Genotype and CYP2D6-Mediated Metabolic Activity.

The cytochrome P450 2D6 (CYP2D6) gene locus is challenging to accurately genotype due to numerous single nucleotide variants and complex structural variation. Our goal was to determine whether the CYP2D6 genotype-phenotype correlation is improved when diplotype assignments incorporate structural variation, identified by the bioinformatics tool Stargazer, with next-generation sequencing data. Using CYP2D6 activity measured with substrates dextromethorphan and metoprolol, activity score explained 40% and 34% of variability in metabolite formation rates, respectively, when diplotype calls incorporated structural variation, increasing from 36% and 31%, respectively, when diplotypes did not incorporate structural variation. We also investigated whether the revised Clinical Pharmacogenetics Implementation Consortium (CPIC) recommendations for translating genotype to phenotype improve CYP2D6 activity predictions over the current system. Although the revised recommendations do not improve the correlation between activity score and CYP2D6 activity, perhaps because of low frequency of the CYP2D6*10 allele, the correlation with metabolizer phenotype group was significantly improved for both substrates. We also measured the function of seven rare coding variants: one (A449D) exhibited decreased (44%) and another (R474Q) increased (127%) activity compared with reference CYP2D6.1 protein. Allele-specific analysis found that A449D is part of a novel CYP2D6*4 suballele, CYP2D6*4.028. The novel haplotype containing R474Q was designated CYP2D6*138 by PharmVar; another novel haplotype containing R365H was designated CYP2D6*139. Accuracy of CYP2D6 phenotype prediction is improved when the CYP2D6 gene locus is interrogated using next-generation sequencing coupled with structural variation analysis. Additionally, revised CPIC genotype to phenotype translation recommendations provides an improvement in assigning CYP2D6 activity.

Tuning down the environmental interests of organoclays for emerging pollutants: Pharmaceuticals in presence of electrolytes.

The impact of electrolytes on the adsorption of emerging pollutants: pharmaceuticals onto layered materials: a raw clay mineral and its nonionic and cationic organoclay derivatives was studied. The selected pharmaceuticals: amoxicillin, norfloxacin, sulfamethoxazole, metoprolol, carbamazepine, and trimethoprim show different electric charges: zwitterionic, anionic, cationic and neutral and hydrophobic character (different LogP). Without any salts, the set of complementary data obtained by UV and infrared spectroscopies, X-ray diffraction points out the importance of the electric charge which represents a key parameter in both the spontaneity and feasibility of the adsorption. In contrast, the hydrophobicity of the analytes plays a minor role but determines the magnitude of the adsorbed amount of pharmaceuticals onto organoclays. With a dual hydrophilic and hydrophobic behavior, nonionic organoclay appears to be the most polyvalent material for the removal of the pharmaceuticals. In the presence of electrolytes (NaCl at a concentration of 1 × 10-2 mol L-1), both nonionic and cationic organoclays show a decrease of their efficiencies, whereas the adsorption is particularly enhanced for Na-Mt except for the cationic species (trimethoprim and metoprolol). Thus, in realistic experimental conditions close to those of natural effluents, raw clay mineral appears as the most appropriate sorbent for the studied pharmaceuticals while it raises the question of the usefulness of organoclays in water remediation strategy.

Comparative research on the metabolism of metoprolol by four CYP2D6 allelic variants in vitro with LC-MS/MS.

Specific study about the effect of cytochrome P450 2D6 (CYP2D6) polymorphisms on the metabolism of clinic drugs is of great significance for drug safety investigation. Here, the interaction between CYP2D6 variants (*1, *2, *10, *39) and metoprolol (MET) was intensively researched in vitro from the aspect of drug-enzyme kinetic study. To obtain quantitative data, α-hydroxymetoprolol (main metabolite of MET) was selected as an ideal analyte and an LC-MS/MS method was adopted for sample determination. Firstly, by selecting suitable internal standard and optimizing separation condition, the LC-MS/MS method was established and validated. Then, the drug-enzyme incubation system was optimized by two parameters: incubation time and amount of enzyme. Lastly, the interaction between CYP2D6 allelic variants and MET was characterized by Km, Vmax and CLint. As a result, four CYP2D6 enzymes displayed diverse Km or Vmax towards MET and the values of CLint showed a wide range from 8.91 to 100%. Relative to CYP2D6*1 (CLint*1 = 100%), CYP2D6*2 demonstrated the second high catalytic activity (CLint*2/*1 = 74.87%) while CYP2D6*39 (CLint*39/*1 = 29.65%) and CYP2D6*10 (CLint*10/*1 = 8.91%) showed minimal catalytic activity. This comprehensive in vitro data suggested the prominent influence of CYP2D6 polymorphisms on the metabolism of MET, which could offer valuable information for personalized administration of MET in clinic.

Enantioseparation of propranolol, amlodipine and metoprolol by electrochromatography using an open tubular capillary modified with ß-cyclodextrin and poly(glycidyl methacrylate) nanoparticles.

The inner wall of a capillary was coated with glycidyl methacrylate (GMA) to form tentacle-type coating, and poly(glycidyl methacrylate) nanoparticles (PGMA NPs) were then immobilized on the film. Ethanediamine-ß-cyclodextrin as chiral selector was covalently bonded into the PGMA NPs through the ring-open reaction. The materials were characterized by SEM, TEM and FT-IR. The modified column was applied to the enantioseparation of the racemates of propranolol, amlodipine and metoprolol. Compared to a capillary with a single layer of CD-PGMA (without GMA coating) and to a CD-GMA system (without PGMA nanoparticles), the performance of the capillary is strongly improved. The effects of buffer pH value and applied voltage were optimized. Best resolutions (propranolol: 1.27, metoprolol: 1.01 and amlodipine: 2.93) were obtained when using the PGMA-coated capillary system. The run-to-run, day-to-day and column-to-column reproducibility were tested and found to be highly attractive. The new stationary phase is likely to have a large potential and scope in that it may also be applied to chiral separations of other enantiomers, such as amino acids and biogenic amines. Graphical abstract Schematic presentation of the preparation of a capillary column with glycidyl methacrylate (GMA) coating which was then immobilized with poly(glycidyl methacrylate) nanoparticles and ethanediamine-ß-cyclodextrin. This novel open tubular column was applied to construct capillary electrochromatography system for separation of basic racemic drugs.

LC-MS/MS analysis of the plasma concentrations of a cocktail of 5 cytochrome P450 and P-glycoprotein probe substrates and their metabolites using subtherapeutic doses.

Drug transporters and CYP enzymes are important sources of pharmacokinetics (PK) variability in drug responses and can cause various pharmacological and toxicological consequences, leading to either toxicity or an insufficient pharmacological effect. In recent years, the cocktail approach was developed to determine in vivo CYP and transporters activities, but these approaches are somewhat limited. We described the development and validation of three sensitive and specific LC-MS/MS assays for the determination of P-gp and major human CYP isoenzyme activities following oral administration of a drug cocktail of subtherapeutic doses (lower than 10 times) of caffeine (CAF), omeprazole (OME), losartan (LOS), midazolam (MDZ), metoprolol (METO) and fexofenadine (FEX) in healthy volunteers. The three validated methods were selective for all tested analytes. No interference or matrix effect was observed for the mass transition and retention times for all compounds monitored. Additionally, assays were linear over a wide range, and limits of quantification varied between 0.01-5 ng/mL plasma. The coefficients of variation obtained in the precision studies and the inter- and intra-assay accuracies were less than 15%, guaranteeing the reproducibility and repeatability of the results. All substrates and metabolites were stable in plasma during freeze-thaw cycles. Three healthy volunteers were selected based on genotyping for CYP2C9, CYP2C19 and CYP2D6. One volunteer was genotyped as an extensive metabolizer (EM) for all tested CYP isoforms, one volunteer was genotyped as a poor metabolizer (PM) for the CYP2C9 isoform (CYP2C9*3/*3), and one volunteer was genotyped as a PM for the CYP2D6 isoform (CYP2D6*4/*4). The methods allowed the quantification of all analytes over the entire sampling period (12 h) in all studied genotypes. Thus, the analytical methods described here were sufficiently sensitive for use in low-dose pharmacokinetic studies.

Occurrence and enantiomer profiles of ß-blockers in wastewater and a receiving water body and adjacent soil in Tianjin, China.

A total of 58 samples were collected from hospitals, municipal wastewater treatment plants (WWTPs), a receiving water body (Dagu Drainage Canal, DDC), and adjacent farmland in Tianjin City, China, in May and November 2013 and were analyzed for five common ß-blockers (atenolol, sotalol, metoprolol, propranolol, and nadolol) to elucidate their source, occurrence and fate in a typical city in China. The profiles of the enantiomers of the ß-blockers in some samples were examined. Sotalol, metoprolol and propranolol were frequently detected, atenolol was less frequently detected, and nadolol was mostly not detected. Generally, the concentrations in hospital wastewaters occurred from

Simultaneous determination of amlodipine and metoprolol in their combined dosage form using a synchronous fluorescence spectrofluorimetric method.

Highly sensitive, rapid, accurate and precise synchronous fluorescence spectrofluorimetric method has been developed for simultaneous analysis of a mixture of amlodipine (AMD) and metoprolol (MET). The method relies on measuring the relative synchronous fluorescence intensity of both drugs at Δλ of 90 nm in acetate buffer solution at pH 5. The experimental parameters influencing the developed method were investigated and optimized. The method was linear over the ranges 0.2-2 µg/ml and 0.5-10 µg/ml for AMD and MET, respectively. The limits of detection were 50 ng/ml for AMD and 130 ng/ml for MET while the limits of quantitation were 150 ng/ml for AMD and 390 ng/ml for MET. The developed method was applied successfully for the determination of the two drugs in their co-formulated tablet. The mean percent recoveries were found to be 100.51 and 99.57 for AMD and MET, respectively.

Biodegradability of fluoxetine, mefenamic acid, and metoprolol using different microbial consortiums.

The biodegradation of fluoxetine, mefenamic acid, and metoprolol using ammonium-nitrite-oxidizing consortium, nitrite-oxidizing consortium, and heterotrophic biomass was evaluated in batch tests applying different retention times. The ammonium-nitrite-oxidizing consortium presented the highest biodegradation percentages for mefenamic acid and metoprolol, of 85 and 64% respectively. This consortium was also capable to biodegrade 79% of fluoxetine. The heterotrophic consortium showed the highest ability to biodegrade fluoxetine reaching 85%, and it also had a high potential for biodegrading mefenamic acid and metoprolol, of 66 and 58% respectively. The nitrite-oxidizing consortium presented the lowest biodegradation of the three pharmaceuticals, of less than 48%. The determination of the selected pharmaceuticals in the dissolved phase and in the biomass indicated that biodegradation was the major removal mechanism of the three compounds. Based on the obtained results, the biodegradation kinetics was adjusted to pseudo-first-order for the three pharmaceuticals. The values of k biol for fluoxetine, mefenamic acid, and metoprolol determined with the three consortiums indicated that ammonium-nitrite-oxidizing and heterotrophic biomass allow a partial biodegradation of the compounds, while no substantial biodegradation can be expected using nitrite-oxidizing consortium. Metoprolol was the less biodegradable compound. The sorption of fluoxetine and mefenamic acid onto biomass had a significant contribution for their removal (6-14%). The lowest sorption coefficients were obtained for metoprolol indicating that the sorption onto biomass is poor (3-4%), and the contribution of this process to the global removal can be neglected.

Detection of Metoprolol in Human Biofluids and Pharmaceuticals via Ion-Transfer Voltammetry at the Nanoscopic Liquid/Liquid Interface Array.

Metoprolol (MTP) is one of the most widely used antihypertensive drugs yet banned to use in sport competition. Therefore, there has been an increasing demand for developing simple, rapid, and sensitive methods suited to the identification and quantification of MTP in human biofluids. In this work, ultrathin silica nanochannel membrane (SNM) with perforated channels was employed to support nanoscale liquid/liquid interface (nano-ITIES) array for investigation of the ion-transfer voltammetric behavior of MTP and for its detection in multiple human biofluids and pharmaceutical formulation. Several potential interfering substances, including small molecules, d-glucose, urea, ascorbic acid, glycine, magnesium chloride, sodium sulfate and large molecules, bovine serum albumin (BSA), were chosen as models of biological interferences to examine their influence on the ion-transfer current signal of MTP. The results confirmed that the steady-state current wave barely changed in the presence of small molecules. Although BSA displayed an apparent blockade on the transfer of MTP, the accurate determination of MTP in multiple human biofluids (i.e., urine, serum and whole blood) and pharmaceutical formulation were still feasible, thanks to the molecular sieving and antifouling abilities of SNM. A limit of detection (LOD) within the physiological level of MTP during therapy could be achieved for all cases, i.e., 0.5 and 1.1 µM for 100 times diluted urine and serum, respectively, and 2.2 µM for 1000 times diluted blood samples. These results demonstrated that the nano-ITIES array behaved as a simplified and integrated detection platform for ionizable drug analysis in complex media.

Development of potential candidate reference materials for drugs in bottom sediment, cod and herring tissues.

Regular use of a reference material and participation in a proficiency testing program can improve the reliability of analytical data. This paper presents the preparation of candidate reference materials for the drugs metoprolol, propranolol, carbamazepine, naproxen, and acenocoumarol in freshwater bottom sediment and cod and herring tissues. These reference materials are not available commercially. Drugs (between 7 ng/g and 32 ng/g) were added to the samples, and the spiked samples were freeze-dried, pulverized, sieved, homogenized, bottled, and sterilized by γ-irradiation to prepare the candidate materials. Procedures for extraction and liquid chromatography coupled with tandem mass spectrometry were developed to determine the drugs of interest in the studied material. Each target drug was quantified using two analytical procedures, and the results obtained from these two procedures were in good agreement with each other. Stability and homogeneity assessments were performed, and the relative uncertainties due to instability (for an expiration date of 12 months) and inhomogeneity were 10-25% and 4.0-6.8%, respectively. These procedures will be useful in the future production of reference materials.