Optical tuning of copolymer-in-oil tissue-mimicking materials for multispectral photoacoustic imaging.

Objective. The availability of tissue-mimicking materials (TMMs) for manufacturing high-quality phantoms is crucial for standardization, evaluating novel quantitative approaches, and clinically translating new imaging modalities, such as photoacoustic imaging (PAI). Recently, a gel comprising the copolymer styrene-ethylene/butylene-styrene (SEBS) in mineral oil has shown significant potential as TMM due to its optical and acoustic properties akin to soft tissue. We propose using artists' oil-based inks dissolved and diluted in balsam turpentine to tune the optical properties.Approach. A TMM was fabricated by mixing a SEBS copolymer and mineral oil, supplemented with additives to tune its optical absorption and scattering properties independently. A systematic investigation of the tuning accuracies and relationships between concentrations of oil-based pigments and optical absorption properties of the TMM across visible and near-infrared wavelengths using collimated transmission spectroscopy was conducted. The photoacoustic spectrum of various oil-based inks was studied to analyze the effect of increasing concentration and depth.Main results. Artists' oil-based inks dissolved in turpentine proved effective as additives to tune the optical absorption properties of mineral oil SEBS-gel with high accuracy. The TMMs demonstrated long-term stability and suitability for producing phantoms with desired optical absorption properties for PAI studies.Significance. The findings, including tuning of optical absorption and spectral shape, suggest that this TMM facilitates the development of more sophisticated phantoms of arbitrary shapes. This approach holds promise for advancing the development of PAI, including investigation of the spectral coloring effect. In addition, it can potentially aid in the development and clinical translation of ultrasound optical tomography.

Review on Cutting Fluids: Formulation, Chemistry and Deformulation.

This comprehensive review offers a chemical analysis of cutting fluids, delving into both their formulation and deformulation processes. The study covers a wide spectrum of cutting fluid formulations, ranging from simple compositions predominantly comprising oils, whether mineral or vegetable, to emulsions. The latter involves the integration of surfactants, encompassing both nonionic and anionic types, along with a diverse array of additives. Concerning oils, the current trend leans towards the use of vegetable oils instead of mineral oils for environmental reasons. As vegetable oils are more prone to oxidation, chemical alterations, the addition of antioxidant may be necessary. The chemical aspects of the different compounds are scrutinized, in order to understand the role of each component and its impact on the fluid's lubricating, cooling, anti-wear, and anti-corrosion properties. Furthermore, the review explores the deformulation methodologies employed to dissect cutting fluids. This process involves a two-step approach: separating the aqueous and organic phases of the emulsions by physical or chemical treatments, and subsequently conducting a detailed analysis of each to identify the compounds. Several analytical techniques, including spectrometric or chromatographic, can be employed simultaneously to reveal the chemical structures of samples. This review aims to contribute to the improvement of waste treatment stemming from cutting fluids. By gathering extensive information about the formulation, deformulation, and chemistry of the ingredients, there is a potential to enhance the waste management and disposal effectively.

Improved microwave-assisted saponification to reduce the variability of MOAH determination in edible oils.

BACKGROUND: Mineral oil aromatic hydrocarbon (MOAH) analysis in foods is a major analytical challenge. Quantification is associated with a high uncertainty. The sources of uncertainty are multiple, but the major one is related to data interpretation and integration, which is partially derived from insufficiently efficient sample preparation. Recently, an updated ISO method for the analysis of mineral oil in fats and oils and a standard operating procedure for infant formula analysis have been published. Both methods reported significantly different (up to 1.25) distributions of the internal standards used for quantification (i.e., tri-tert-butyl benzene (TBB) and 2-methyl naphthalene (2-MN)) over the different solvent phases used in the saponification step. RESULTS: In this work, a microwave-assisted saponification and extraction method was optimized for MOAH analysis to solve the problem related to the MOAH internal standards partition. The paper examines the impact of the solvent mixture used, the concentration of KOH on the partition of TBB and 2-MN, and the effect of the matrix and the washing step to extract the unsaponifiable fraction containing the mineral oils. SIGNIFICANCE: The optimized procedure achieved a TBB/2-MN ratio of 1.05 ± 0.01 tested in five different fats and oils, namely, sunflower, rapeseed, coconut, palm, and extra virgin olive oils. The method can significantly contribute to reducing the uncertainty of the MOAH quantification when saponification is applied.

Comparison of carrier gases for the separation and quantification of mineral oil hydrocarbon (MOH) fractions using online coupled high performance liquid chromatography-gas chromatography-flame ionisation detection.

On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak.

A study on the impact of harvesting operations on the mineral oil contamination of olive oils.

During the 2020-21 olive oil campaign, the contribution of harvesting operations to mineral oil saturated (MOSH) and aromatic hydrocarbon (MOAH) contamination was studied. Oils extracted from hand-picked olives (15 different olive groves) generally had background MOSH (<2.7 mg/kg), and no quantifiable MOAH. In 40% of the cases, an important contamination increase was observed after harvesting operations. Except for one sample (325.8 and 111.0 mg/kg of MOSH and MOAH, respectively), other samples reached 4.3-33.7 mg/kg of MOSH and 1.1-11.3 mg/kg of MOAH. Accidental leaks of lubricants and/or contact with lubricated mechanical parts, were identified as important sources of contamination. Chromatographic traces obtained by on-line high-performance liquid chromatography (HPLC)-gas chromatography (GC)-flame ionization detection (FID) allowed for source identification. A comprehensive two-dimensional gas chromatographic platform (GC × GC) with parallel FID/MS detection was implemented for confirmation and to attempt the characterization of the contaminations. Good harvesting practices are suggested to minimize contamination risks.

Combination of Multidimensional Instrumental Analysis and the Ames Test for the Toxicological Evaluation of Mineral Oil Aromatic Hydrocarbons.

Mineral oil aromatic hydrocarbons (MOAHs) include mutagenic and carcinogenic substances and are considered a potential health risk. Current methods address the total MOAH content but cannot address the actual toxicological hazard of individual components. This work presents a combined methodology closing those gaps: high-performance liquid chromatography (HPLC) coupled to gas chromatography with flame ionization detection was used to determine the MOAH content. To characterize present substance classes, comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry was applied. Preparative HPLC separated MOAHs into subgroups, which were tested with a miniaturized Ames test evaluating DNA reactivity of isolated fractions. Combining these methods allowed a correlation between present subgroups and DNA reactivity. The developed approach was applied to a mineral oil and distinguished between not DNA-reactive mono- and diaromatics and DNA-reactive tri- and polyaromatics, providing a proof of concept. Hereinafter, it will be applied to diverse sample matrices including mineral oils, food, and food contact materials.

Determining MOSH and MOAH with High Sensitivity in Vegetable Oil─A New, Reliable, and Comparable Approach Using Online LC-GC-FID─Evaluation of Method Precision Data.

A method for the analysis of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) has been developed to improve interlaboratory precisions especially for amounts below 10 mg/kg. This approach was adopted as the standard method DGF C-VI 22 (20) of the German Society of Fat Sciences. Therefore, this method was evaluated on different edible oils containing a variety of interfering biogenic substances. The precision data were determined in an interlaboratory trial with an international group of 14 laboratories from Germany, Austria, and Italy. Good reproducible relative standard deviations for total MOSH (12.5-20.7%) and total MOAH (12.4-39.5%) as well as HorRat values ranging between 1.1 and 2.3 for total MOSH and between 0.9 and 2.6 for total MOAH have been achieved. As some matrices showed residual interferences in the MOAH fraction, these substances were further analyzed by online high-performance liquid chromatography-comprehensive two dimensional gas chromatography with time of flight mass detection.

Development of an analytical method for the determination of mineral oil aromatic hydrocarbons (MOAH) from printing inks in food packaging.

An analysis method was developed to detect chemical markers of mineral oil aromatic hydrocarbons (MOAH) from offset printing inks in food packaging materials. 16 aromatic hydrocarbons were used as target analytes and different solid phase extraction procedures (SPE) and gas chromatography coupled to mass spectrometry (GC-MS) were tested. The concentration range studied was 0.1-7.5 µg g-1 with R2 higher than 0.9963, intraday RSD values below 5 %, RSD values between days lower than 12 %, recoveries higher than 80 %, LOD and LOQ lower than 0.09 µg g-1. Ten of the target analytes were identified in offset printing inks at concentrations between 2.28 and 8.59 µg g-1. Nine of them were also identified in the food packages examined in concentrations ranging from 0.10 to 0.33 µg g-1. These compounds were: methylnaphthalene, 2-methylnaphthalene, biphenyl, 2,6-dimethylnaphthalene, acenaphthene, 3,3',5,5'-tetramethylbiphenyl, 4,6-dimethyldibenzothiophene, 1-methylpyrene, benzo(b)naphtha(1,2-d)thiophene and 9,9'-dimethylfluorene. Mineral oil in food packaging was previously analysed by GC with flame ionization detection (FID).

Comparison of PAC and MOAH for understanding the carcinogenic and developmental toxicity potential of mineral oils.

The carcinogenicity and developmental toxicity of unrefined mineral oil is related to its 3-7 ring polycyclic aromatic compounds (PAC) content. Therefore, refining operations focus on the targeted removal PAC from mineral oil that may contain aromatics of low toxicological concern. There are thus, two types of aromatic substances in mineral oil: hazardous and non-hazardous. The first type consists of 3-7 ring PAC which may be naked (unsubstituted) or lowly alkylated. The second type or non-hazardous consists of 1-7 ring aromatics with high degree of alkylation or lack of bay or fjord regions. Although these are toxicologically different, they may both elute in the same fraction when using chromatography. To understand how these two aromatic types are related we have assessed the entire mineral oil refinement process by measuring total mineral oil aromatic hydrocarbons (MOAH) content by chromatography next to regulatory hazard tests which focus on 3-7 ring PAC. MOAH content is positively correlated to its molecular weight resulting in aromatic content bias for high viscosity substances. Hazard to 3-7 ring PAC is best controlled by the validated IP346 or modified Ames test. We explain the concept of high vs low alkylation by shortly reviewing new data on alkylated PAC.

Cell-Inspired Hydrogel Microcapsules with a Thin Oil Layer for Enhanced Retention of Highly Reactive Antioxidants.

In nature, individual cells are compartmentalized by a membrane that protects the cellular elements from the surrounding environment while simultaneously equipped with an antioxidant defense system to alleviate the oxidative stress resulting from light, oxygen, moisture, and temperature. However, this mechanism has not been realized in cellular mimics to effectively encapsulate and retain highly reactive antioxidants. Here, we report cell-inspired hydrogel microcapsules with an interstitial oil layer prepared by utilizing triple emulsion drops as templates to achieve enhanced retention of antioxidants. We employ ionic gelation for the hydrogel shell to prevent exposure of the encapsulated antioxidants to free radicals typically generated during photopolymerization. The interstitial oil layer in the microcapsule serves as an stimulus-responsive diffusion barrier, enabling efficient encapsulation and retention of antioxidants by providing an adequate pH microenvironment until osmotic pressure is applied to release the cargo on-demand. Moreover, addition of a lipophilic reducing agent in the oil layer induces a complementary reaction with the antioxidant, similar to the nonenzymatic antioxidant defense system in cells, leading to enhanced retention of the antioxidant activity. Furthermore, we show the complete recovery and even further enhancement in antioxidant activity by lowering the storage temperature, which decreases the oxidation rate while retaining the complementary reaction with the lipophilic reducing agent.

GTL synthetic paraffin oil shows low liver and tissue retention compared to mineral oil.

Oral exposure to mineral oil may result in a narrow fraction of mineral oil saturated hydrocarbon (MOSH) being retained in tissues. Excess of MOSH hepatic retention may lead to the formation of lipogranuloma caused by predominantly multiring cycloalkanes (naphthenics) in a critical range of C25-C35. Although hepatic lipogranuloma is of low pathological concern, MOSH tissue deposition could be minimized by using an oil of similar quality but devoid of naphthenic structures to decrease hepatic retention. Synthetic Gas to liquid (GTL) oils offer an alternative to petroleum derived mineral oils, because they do not contain naphthenic structures. To demonstrate this point, SD rats were fed either GTL oil (99% iso-alkanes) or naphthenic mineral oil (84% cycloalkanes) at 200 mg/kg bw/day for 90 or 134 days with a recovery group. Liver, fat and mesenteric lymph nodes were analyzed for alkane sub-type levels using Online-HPLC-GC-FID and GCxGC-TOF-MS. Results indicate that at equal external dose, GTL hydrocarbons result in lower tissue levels and more rapid excretion than MOSH. GTL retained hepatic fractions were also qualitatively different than MOSH constituents. Because chemical composition differences, GTL oil show low absorption and tissue retention potential and thus an advantageous alternative to conventional mineral oil.

Survey of mineral oil hydrocarbons in Chinese commercial complementary foods for infants and young children.

Recently, mineral oil hydrocarbons (MOH) in various foods have raised significant concern, especially for infants and young children due to their potential adverse health effects. Two fractions can be distinguished by certain analytical techniques, mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). The toxicological profile of MOSH and MOAH differs greatly. The toxicity of MOSH is linked with long-term accumulation of some hydrocarbons. MOAH with three to seven, non- or simple-alkylated, aromatic rings may be mutagenic and carcinogenic. However, data on the occurrence of mineral oils in commercial complementary foods for infants and young children are lacking in China. In the present study, 100 commercial food samples were collected, including 26 pureed or paste canned foods, 21 high-protein ground cereal foods (rice flour), 25 raw cereal foods (noodles), and 28 cereal-based molar sticks and biscuits. The content of MOSH and MOAH in those samples was determined by optimised sample preparation methods combined with on-line high-performance liquid chromatography coupled with gas chromatography and flame ionisation detector (HPLC-GC-FID), with a limit of quantification of 0.5 mg/kg. The results indicated that there were no MOAH detected in any of the foods, but MOSH and polyolefin oligomeric saturated hydrocarbons (POSH) existed in most of the food samples, at <0.5-23.68 mg/kg. Moreover, the data and chromatograms of the MOSH and POSH also indicated that these contaminants were closely correlated to their ingredients and manufacturers. The current study provides basic data to understand MOH exposure and consequent health impact.

Wax-oil lubricants to reduce the shear between skin and PPE.

Prolonged use of tight-fitting PPE, e.g., by COVID-19 healthcare workers leads to skin injuries. An important contributor is the shear exerted on the skin due to static friction at the skin-PPE interface. This study aims to develop an optimised wax-oil lubricant that reduces the friction, or shear, in the skin-PPE contact for up to four hours. Lubricants with different wax-oil combinations were prepared using beeswax, paraffin wax, olive oil, and mineral oil. In-vivo friction measurements involving seven participants were conducted by sliding a polydimethylsiloxane ball against the volar forearms to simulate the skin-PPE interface. The maximum static coefficient of friction was measured immediately and four hours after lubricant application. It was found that the coefficient of friction of wax-oil lubricants is mainly governed by the ratio of wax to oil and the thermal stability and morphology of the wax. To maintain long-term lubricity, it is crucial to consider the absorption of oil into the PPE material. The best performing lubricant is a mixture of 20 wt% beeswax, 40 wt% olive oil, and 40 wt% mineral oil, which compared to unlubricated skin, provides 87% (P = 0.0006) and 59% (P = 0.0015) reduction in instantaneous and 4-h coefficient of friction, respectively.

Migration of food contact substances into dry foods: A review.

A comprehensive review of the literature was performed on migration of substances from packaging materials into dry foods, specifically those with surfaces containing no free fats or oils. Historically, migration from food packaging to dry foods has been assumed to be minimal. However, several recent publications have reported concentrations of migrants into dry foods that are substantially higher than anticipated. The goal of this review is to provide a comprehensive summary of recent studies that examined migration to dry foods or dry food simulants, observe and assess common migrants, and report the highest migration values. Focusing on the packaging materials and migrants that exhibit the highest migration values, this review divided the studies into two categories: 1) analysis of food products in commercial packaging taken directly from grocery store shelves, and 2) analysis of food products and food simulants in contact with packaging or other material fortified with known quantities of a migrant. Discussions include the examination of migration testing methods, viability of different food simulants, and variables that affect migration behaviour. These include the physicochemical properties of both the migrant and food (i.e. volatility, molecular size, structure, food composition and particle size) and factors pertaining to the packaging material and the environment (i.e. temperature, humidity, and the presence of a secondary barrier). Information gaps and remaining questions are also identified and discussed.

Characteristics of an Emulsion Obtained Using Hydrophobic Hydroxypropyl Methylcellulose as an Emulsifier and a High-Pressure Homogenizer.

Hydrophobically modified hydroxypropyl methylcellulose (HM-HPMC), a polymer in which a small amount of HPMC is stearoxyl substituted, was used as an emulsifier of emulsion-type lotion. A high-pressure homogenizer (microfluidizer) was used. The viscosity of the 1% HM-HPMC aqueous gel decreased after passing through the microfluidizer from 5.5 to 2.7 Pa·s. When liquid paraffin (LP) was used as the oil phase, a stable emulsion was obtained with an LP ratio of 1-40%. The apparent viscosity decreased with LP ratios up to 20%, and then increased with increasing LP concentration. The emulsions with an LP ratio <20% presented a pseudo-viscous flow, similar to that of the diluted polymer solution. HM-HPMC likely adsorbed onto the oil with a stearoxyl group; thus, the interaction between the stearoxyl group, which explained the high viscosity of HM-HPMC, decreased, reducing the viscosity of the emulsion. The LP ratio was 40%, and the emulsion presented a plastic flow, which is typical of concentrated emulsions. The size of the droplet in the emulsion was approximately 1 µm regardless of the LP ratio. When low-viscosity LPs or monoester-type oils such as isopropyl myristate were used, some of the emulsions presented creaming. An emulsion using HM-HPMC as an emulsifier and an appropriate oil homogenized with a microfluidizer is stable, has low viscosity, and can be easily spread on skin.

Comparison of the Functional Barrier Properties of Chitosan Acetate Films with Conventionally Applied Polymers.

The current demand to cut back on the use of plastic materials has brought a major boost to the search for bio-based alternatives. Not only are plastic bags and primary food packaging under scrutiny here, but also those materials used as functional barriers to reduce, for example, the migration of mineral oil hydrocarbons (MOH) from recycled paper and board packaging. Most of the barriers now in use are synthetic, often have only moderate barrier functionalities and in addition reduce the environmentally-friendly character of cellulose-based materials. Against this background, bio-based polymers have been evaluated in terms of their functional barrier properties. Chitosan was found to be among the best performers in these materials. In this study, the behavior of a lab-made chitosan acetate film was compared with conventionally produced polymer films. The two-sided migration experiment described recently was used to determine the barrier properties of the tested materials. This not only allowed to test the intrinsic migration of the films and the permeation through them, but also to simulate real packaging situations by using a recycled paper as donor for MOH. The migrated fractions were determined using gas-chromatography-based techniques. While the conventionally produced polymer films showed only moderate barrier function, excellent results were seen for the biopolymer. It reduced the migration from the recycled paper to not detectable, singling it out as a good alternative to conventional materials.

Mild mixed-solvent extraction for determination of total mineral oil hydrocarbon contaminants in milk powder products.

A mild mixed-solvent of n-hexane/isopropanol is proposed for extracting total mineral oil hydrocarbons (MOH) from commercial milk powder products. Unlike acid-hydrolysis, the mixed-solvent extraction was performed at ambient temperature and the low-boiling-point hydrocarbons were retained to the greatest extent. After extraction, total MOH was determined by on-line liquid chromatography-gas chromatography with a flame ionization detector (LC-GC-FID). The validation of the proposed extraction method revealed a recovery efficacy of 83.0-107.5% and a limit of quantification of 0.5 mg/kg. Then, the total MOH in ten commercial milk powders was determined and mineral oil saturated hydrocarbons (MOSH)/polyolefin oligomeric saturated hydrocarbons (POSH) were found to be within the range of 0.61-5.46 mg/kg. The comparison of the total and surface MOSH/POSH indicated that a major part of the contamination was derived from sources before packaging. The present study provides a robust method for the extraction and determination of total MOH in milk powders.

Bedside Diagnostics for Infections: A Guide for Dermatologists.

In dermatology, there are many bedside diagnostic tests that may aid in more rapid diagnosis and early initiation of appropriate therapy. When performed correctly, these bedside diagnostic tests can provide both sensitive and specific results. We discuss bedside diagnostic tests, such as the Tzanck smear, potassium hydroxide (KOH) preparation, and mineral oil preparation, with a specific focus on their use in diagnosing infectious dermatoses.

Physicochemical characteristics of oil-based cuttings from pretreatment in shale gas well sites.

Understanding the physicochemical characteristics of oil-based cuttings (OBCs) is an important foundation for subsequent treatment and management. The macro- and microscopic properties of white oil-based cuttings (WOBCs) and diesel-based cuttings (DBCs) after the different pretreatment steps have been assessed using scanning electron microscopy. The organic and inorganic compositions of OBCs have been analyzed using X-ray diffraction, Fourier-transform infrared spectrometry, and gas chromatography-mass spectrometry. Inorganic matter (SiO2, BaSO4, and CaCO3), alkanes, aromatic compounds, and water were the main components of OBCs. The organic content (26.14%) and alkane content of the WOBCs were higher than that of the DBCs, whereas for the inorganic content (70.87%), the reverse was true. The macro- and micromorphologies of OBCs were quite different because their oil and water contents were different. The oil contents of OBCs decreased in the order A1 (14.64%) > A3 (12.67%) > A2 (11.06%) and B1 (9.19%) > B3 (8.94%) > B2 (4.66%); the water contents decreased in the order A1 (2.99%) > A3 (2.19%) > A2 (1.09%) and B1 (2.30%) > B3 (1.87%) > B2 (1.09%). Moreover, a skid-mounted treatment technology for OBCs was proposed. The results can be a scientific guidance for the treatment and management of OBCs.

Metals in used and unused metalworking fluids: X-ray fluorescence spectrometry as a screening test.

BACKGROUND: Exposure to metalworking fluids (MWFs) is a well-known cause of occupational contact dermatitis. OBJECTIVES: We aimed to (1) determine the amount of nickel, chromium, and cobalt in large samples of used and unused MWFs collected from metalworking plants in Denmark, and (2) evaluate a handheld x-ray fluorescence (XRF) device as a screening instrument for metals in MWFs. METHODS: A handheld XRF device was used to screen for metals in MWFs. All samples were also analyzed for concentrations of nickel, chromium, and cobalt using graphite furnace atomic absorption spectroscopy (GFAAS). RESULTS: GFAAS analysis showed that 13 of 80 samples (16.3%) contained >1 mg/kg (ppm) nickel (range: 6.4-17.7 mg/kg), 3 of 80 (3.8%) contained >1 (range: 1.4-3.1) mg/kg chromium, and 1 of 80 (1.3%) contained 1.3 mg/kg cobalt. XRF-screening detected nickel in eight samples (range: 2.5-15.5 mg/kg), but only one sample with 3.0 (±0.5) mg/kg was found subsequently to contain 9.9 (0.02) mg/kg nickel by GFAAS. Although no chromium was found by XRF analysis, cobalt was found in two samples with 6 (±1.5) mg/kg and 5 (±1.5) mg/kg, subsequently found to contain 0.1 (±0.01) mg/kg and 0.08 (±0.01) mg/kg by GFAAS. Similar concentrations of nickel were found in used (N = 6, range: 6.4-17.7 mg/kg) and unused MWFs (N = 7, range: 9.1-17.3 mg/kg). CONCLUSION: Considerable levels of nickel, chromium, and cobalt were found in some used and unused MWFs indicating that these might represent a source of metal allergy. The XRF device is a poor screening test for these metals in MWFs.