Lessons from Theranos - Restructuring Biomedical Innovation.

After raising more than $700 million, Elizabeth Holmes, the founder and chief executive officer of a healthcare startup once valued at $10 billion, was found guilty on four charges of defrauding investors. Founded in 2003, Theranos Inc. was a privately held corporation that aimed to disrupt the diagnostics industry with rapid, direct-to-consumer laboratory testing using only "a drop of blood" and the company's patented Nanotainer technology. By exploiting gaps in regulatory policy, Theranos brought its panel of laboratory tests to patients without pre-market review or validation from peer-reviewed scientific research. Investigations into Theranos' dubious operations and inaccurate test results exposed the failed venture which had squandered millions of dollars. Theranos affected the lives and health of patients further disrupting an already tenuous relationship between healthcare and the public - the importance of which cannot be understated in the setting of the COVID-19 pandemic. As medical systems address a national public health crisis and pervasive structural inequities, we must align stakeholder incentives between industry and academic biomedical innovation to rebuild trust with our patients.

Triboelectric Nanogenerator from Used Surgical Face Mask and Waste Mylar Materials Aiding the Circular Economy.

Apart from claiming the lives of more than 3.2 million people, the COVID-19 pandemic is worsening the global plastic pollution every day, mainly with the overflux of single-use polypropylene (PP) face masks. In this scenario, as an innovative solution to mitigate plastic pollution as well as to meet the rising electrical energy demand, we are introducing an all-flexible and facile waste material-based triboelectric nanogenerator (WM-TENG), aiding toward the circular economy. The WM-TENG operating in contact separation mode is fabricated using the PP from a used face mask in combination with recovered Mylar sheets from solid wastes as triboelectric contact layers and a flexible supporting structure. After detailed investigation and trials to study the effect of various disinfection mechanisms of PP materials on the energy output of WM-TENG, UV-C radiation is selected for disinfecting the used masks owing to the retention of electrical energy output. Under a tapping force of 3 N, the WM-TENG having an active area of 6 cm2 delivers an open-circuit voltage of 200 V and a short-circuit current density of 0.29 mA/m2, respectively. The WM-TENG also delivered a maximum power density of 71.16 mW/m2 under 108 Ω load. Additionally, the WM-TENG is demonstrated for powering electronic gadgets such as a calculator, digital thermometer, and LCD clock. This flexible and low-cost nanogenerator without any complex fabrication steps is a sustainable solution for the alarming plastic pollution as well as the rising energy demands.

Batch fabrication and compact integration of customized multispectral filter arrays towards snapshot imaging.

Snapshot multispectral imaging (MSI) has been widely employed in the rapid visual inspection by virtues of the non-invasive detection mode and short integration time. As the critical functional elements of snapshot MSI, narrowband, customizable, and pixel-level multispectral filter arrays (MSFAs) that are compatible with imaging sensors are difficult to be efficiently manufactured. Meanwhile, monolithically integrating MSFAs into snapshot multispectral imagers still remains challenging considering the strict alignment precision. Here, we propose a cost-efficient, wafer-level, and customized approach for fabricating transmissive MSFAs based on Fabry-Perot structures, both in the pixel-level and window-tiled configuration, by utilizing the conventional lithography combined with the deposition method. The MSFA chips own a total dimension covering the area of 4.8 mm × 3.6 mm with 4 × 4 bands, possessing the capability to maintain narrow line widths (∼25 nm) across the whole visible frequencies. After the compact integration with the imaging sensor, the MSFAs are validated to be effective in filtering and target identification. Our proposed fabrication method and imaging mode show great potentials to be an alternative to MSFAs production and MSI, by reducing both complexity and cost of manufacturing, while increasing flexibility and customization of imaging system.

REVIEW: Nanobiotechnology: Cradle for revolution in drug carrier systems.

The role of nanobiotechnology in the treatment of diseases is limitless. In this review we tried to focus main aspects of nanotechnology in drug carrier systems for treatment and diagnosis of various diseases such as cancer, pulmonary diseases, infectious diseases, vaccine development, diabetes mellitus and the role of nanotechnology on our economy and its positive social impacts on our community. We discussed here about the different "Biotechnano Strategies" to develop new avenues and ultimately improve the treatment of multiple diseases.

Worldwide Scientific Research on Nanotechnology: A Bibliometric Analysis of Tendencies, Funding, and Challenges.

The main objective of this investigation was to analyze the scientific production in global research on nanotechnology, integrating scientific production, funding of studies, collaborations between countries, and the most cited publications. The source for obtaining the research papers for our analysis was the Science Citation Index Expanded from the Web of Science. A total of 3546 documents were extracted during the period of 1997-2018. Food science & technology, chemistry (applied and analytical), spectroscopy, and agriculture appeared as the main areas where the articles were published. Most prolific and cited journals were Analytical Methods, Journal of Agricultural and Food Chemistry, and Food Chemistry. The co-word analysis showed the relationships between "nanoparticles", which is the central word, and "silver nanoparticles", "delivery systems", and "zinc-nanoparticles". The most productive countries were China (1089 papers), the United States (523), Iran (427), and India (359). The main cited topics deal with the biomedical applications of nanoparticles, its synthesis from plants, and its applications in food science. The results highlight an important collaboration between institutions and countries. The availability of funding for research in nanotechnology was remarkable compared to other fields. The multidisciplinarity of the nanotechnology field is one of the main features as well as one of the central findings.

Multiplexed Digital Detection of B-Cell Acute Lymphoblastic Leukemia Fusion Transcripts Using the NanoString nCounter System.

Chromosomal rearrangements resulting in fusion transcripts have been reported in precursor B-cell acute lymphoblastic leukemia (B-ALL). The identification of fusion events is crucial in the diagnosis of B-ALL. In this study, we used NanoString nCounter technology to design, validate, and evaluate a multiplex panel for the detection of B-ALL fusion transcripts. Fifty-one B-ALL fusion transcripts reported in children in the literature were included in the design of the NanoString panel. Twenty-six fusion transcripts were validated using 64 positive-control samples and 74 negative-control samples with 100% sensitivity and 99% specificity in comparison to RT-PCR. Our results support a potential role of NanoString's technology as a robust and cost-effective technique that could be used in the detection of fusion transcripts and implemented into the diagnostic algorithm of B-ALL.

Real-Time Sensing with Patterned Plasmonic Substrates and a Compact Imager Chip.

Optical sensing is an important research field due to its proven ability to be extremely sensitive, nondestructive, and applicable to sensing a wide range of chemical, thermal, electric, or magnetic phenomena. Beyond traditional optical sensors that often rely on bulky setups, plasmonic nanostructures can offer many advantages based on their sensitivity, compact form, cost-effectiveness, multiplexing compatibility, and compatibility with many standard semiconductor nanofabrication techniques. In particular, plasmon-enhanced optical transmission through arrays of nanostructured holes has led to the development of a new generation of optical sensors. In this chapter we present a simple fabrication technique to use plasmonic nanostructures as compact sensors. We position the nanohole array, an LED illumination source, and a spacer layer directly on top of a standard complementary metal-oxide-semiconductor (CMOS) imager chip. This setup is a viable sensor platform in both liquid and gas environments. These devices could operate as low-cost sensors for environmental monitoring, security, food safety, or monitoring small-molecule binding to extract affinity information and binding constants.

Bioproduction of pure, kilobase-scale single-stranded DNA.

Scalable production of kilobase single-stranded DNA (ssDNA) with sequence control has applications in therapeutics, gene synthesis and sequencing, scaffolded DNA origami, and archival DNA memory storage. Biological production of circular ssDNA (cssDNA) using M13 addresses these needs at low cost. However, one unmet goal is to minimize the essential protein coding regions of the exported DNA while maintaining its infectivity and production purity to produce sequences less than 3,000 nt in length, relevant to therapeutic and materials science applications. Toward this end, synthetic miniphage with inserts of custom sequence and size offers scalable, low-cost synthesis of cssDNA at milligram and higher scales. Here, we optimize growth conditions using an E. coli helper strain combined with a miniphage genome carrying only an f1 origin and a ß-lactamase-encoding (bla) antibiotic resistance gene, enabling isolation of pure cssDNA with a minimum sequence genomic length of 1,676 nt, without requiring additional purification from contaminating DNA. Low-cost scalability of isogenic, custom-length cssDNA is demonstrated for a sequence of 2,520 nt using a bioreactor, purified with low endotoxin levels (<5 E.U./ml). We apply these exonuclease-resistant cssDNAs to the self-assembly of wireframe DNA origami objects and to encode digital information on the miniphage genome for biological amplification.

One-Pot Production of RNA Nanoparticles via Automated Processing and Self-Assembly.

From the original sequencing of the human genome, it was found that about 98.5% of the genome did not code for proteins. Subsequent studies have now revealed that a much larger portion of the genome is related to short or long noncoding RNAs that regulate cellular activities. In addition to the milestones of chemical and protein drugs, it has been proposed that RNA drugs or drugs targeting RNA will become the third milestone in drug development ( Shu , Y. ; Adv. Drug Deliv. Rev. 2014 , 66 , 74 . ). Currently, the yield and cost for RNA nanoparticle or RNA drug production requires improvement in order to advance the RNA field in both research and clinical translation by reducing the multiple tedious manufacturing steps. For example, with 98.5% incorporation efficiency of chemical synthesis of a 100 nucleotide RNA strand, RNA oligos will result with 78% contamination of aborted byproducts. Thus, RNA nanotechnology is one of the remedies, because large RNA can be assembled from small RNA fragments via bottom-up self-assembly. Here we report the one-pot production of RNA nanoparticles via automated processing and self-assembly. The continuous production of RNA by rolling circle transcription (RCT) using a circular dsDNA template is coupled with self-cleaving ribozymes encoded in the concatemeric RNA transcripts. Production was monitored in real-time. Automatic production of RNA fragments enabled their assembly either in situ or via one-pot co-transcription to obtain RNA nanoparticles of desired motifs and functionalities from bottom-up assembly of multiple RNA fragments. In combination with the RNA nanoparticle construction process, a purification method using a large-scale electrophoresis column was also developed.

Large-Area, Ultrathin Metal-Oxide Semiconductor Nanoribbon Arrays Fabricated by Chemical Lift-Off Lithography.

Nanoribbon- and nanowire-based field-effect transistors (FETs) have attracted significant attention due to their high surface-to-volume ratios, which make them effective as chemical and biological sensors. However, the conventional nanofabrication of these devices is challenging and costly, posing a major barrier to widespread use. We report a high-throughput approach for producing arrays of ultrathin (∼3 nm) In2O3 nanoribbon FETs at the wafer scale. Uniform films of semiconducting In2O3 were prepared on Si/SiO2 surfaces via a sol-gel process prior to depositing Au/Ti metal layers. Commercially available high-definition digital versatile discs were employed as low-cost, large-area templates to prepare polymeric stamps for chemical lift-off lithography, which selectively removed molecules from self-assembled monolayers functionalizing the outermost Au surfaces. Nanoscale chemical patterns, consisting of one-dimensional lines (200 nm wide and 400 nm pitch) extending over centimeter length scales, were etched into the metal layers using the remaining monolayer regions as resists. Subsequent etch processes transferred the patterns into the underlying In2O3 films before the removal of the protective organic and metal coatings, revealing large-area nanoribbon arrays. We employed nanoribbons in semiconducting FET channels, achieving current on-to-off ratios over 107 and carrier mobilities up to 13.7 cm2 V-1 s-1. Nanofabricated structures, such as In2O3 nanoribbons and others, will be useful in nanoelectronics and biosensors. The technique demonstrated here will enable these applications and expand low-cost, large-area patterning strategies to enable a variety of materials and design geometries in nanoelectronics.

Self-Propelled Micro/Nanomotors for Sensing and Environmental Remediation.

Self-propelled micro/nanomotors have gained attention for successful application in cargo delivery, therapeutic treatments, sensing, and environmental remediation. Unique characteristics such as high speed, motion control, selectivity, and functionability promote the application of micro/nanomotors in analytical sciences. Here, the recent advancements and main challenges regarding the application of self-propelled micro/nanomotors in sensing and environmental remediation are discussed. The current state of micro/nanomotors is reviewed, emphasizing the period of the last five years, then their developments into the future applications for enhanced sensing and efficient purification of water resources are extrapolated.

Cost-effective synthesis of three-dimensional nitrogen-doped nanostructured carbons with hierarchical architectures from the biomass of sea-tangle for the amperometric determination of ascorbic acid.

In this work, the three-dimensional nitrogen-doped nanostructured carbons with hierarchical architectures (3D-NNCsHAs) with high density of defective sites, high surface area and pluralities of pore size distributions was prepared through the pyrolysis of sea-tangle (Laminaria japonica), an inexpensive, eco-friendly and abundant precursor. Benefitting from their structural uniqueness, a selective and sensitive ascorbic acid (AA) sensor based on 3D-NNCsHAs was developed. Compared to the glassy carbon electrode (GCE) and the carbon nanotubes modified GCE (CNTs/GCE), the 3D-NNCsHAs modified GCE (3D-NNCsHAs/GCE) presents higher performance towards the electrocatalysis and detection of AA, such as lower detection limit (1 µM), wider linear range (10-4410 µM) and lower electrooxidation peak potential (-0.02 V vs. Ag/AgCl). In addition, 3D-NNCsHAs/GCE also exhibits high anti-interference and anti-fouling abilities for AA detection. Particularly, the fabricated 3D-NNCsHAs/GCE is able to determine AA in real samples and the results acquired are satisfactory. Therefore, the 3D-NNCsHAs can be considered as a kind of novel electrode nanomaterial for the fabrication of selective and sensitive AA sensor for the extensive practical applications ranging from food analysis, to pharmaceutical industry and clinical test.

Bioprocessing strategies for cost-effective large-scale biogenic synthesis of nano-MgO from endophytic Streptomyces coelicolor strain E72 as an anti-multidrug-resistant pathogens agent.

In this report, the local nano-MgO synthesizer strain has been isolated from Ocimum sanctum plant and deposited in GenBank as endophytic Streptomyces coelicolor strain E72. Its intracellular metabolic fraction that contains 7.2 µg/µl of carbohydrate, 6.3 g/l of protein and 5.2 nmol/hr/ml of nitrate reductase used to produce multi-surface shaped nano-MgO with diameter ~25 nm. To the best of our knowledge, this is the first report using statistical nanobiotechnological strategies (Plackett -Burman, Box-Behnken and Taguchi experimental designs) to study and evaluate the endophytic S. coelicolor biomass production (123.3 g/l) and extract the highest bioactive metabolites that used for biogenic synthesis of nano-MgO (320 g/l) through exponential sucrose pulses feeding fermentation strategy after 192 hr in semi industrial scale bioreactor (7 L). Purified nano-MgO applied in vitro against multi-drug resistant human pathogens and the large inhibition zone recorded against Shigella flexneri (108 ± 10.53 mm). The average of MICs was recorded as 25 µg/ml that inhibited 90% of the pathogenic living cells and compared with 100 mg/ml ampicilin/sulbactam solution that killed 40% of the same pathogen. These results are expected to gather sufficient knowledge to discover and develop a new cheap and eco-friendly nano-MgO as an extremely strong antimicrobial agent used in biomedical applications.

[DNA sequencing by nanopores: achievements and prospects]. / Séquençage de l'ADN par nanopores - Résultats et perspectives.

After years of development, the use of nanopore as a sensor to sequence DNA molecules is now a viable and promising possibility. Single base pair detection during DNA transport enables to record ultra-long threads with high parallelization and rates. I will present in this review the current methodologies based on electrical detection and biological nanopores and the new methods based on solid state nanopores and optical detection.

Biotechnological mass production of DNA origami.

DNA nanotechnology, in particular DNA origami, enables the bottom-up self-assembly of micrometre-scale, three-dimensional structures with nanometre-precise features. These structures are customizable in that they can be site-specifically functionalized or constructed to exhibit machine-like or logic-gating behaviour. Their use has been limited to applications that require only small amounts of material (of the order of micrograms), owing to the limitations of current production methods. But many proposed applications, for example as therapeutic agents or in complex materials, could be realized if more material could be used. In DNA origami, a nanostructure is assembled from a very long single-stranded scaffold molecule held in place by many short single-stranded staple oligonucleotides. Only the bacteriophage-derived scaffold molecules are amenable to scalable and efficient mass production; the shorter staple strands are obtained through costly solid-phase synthesis or enzymatic processes. Here we show that single strands of DNA of virtually arbitrary length and with virtually arbitrary sequences can be produced in a scalable and cost-efficient manner by using bacteriophages to generate single-stranded precursor DNA that contains target strand sequences interleaved with self-excising 'cassettes', with each cassette comprising two Zn2+-dependent DNA-cleaving DNA enzymes. We produce all of the necessary single strands of DNA for several DNA origami using shaker-flask cultures, and demonstrate end-to-end production of macroscopic amounts of a DNA origami nanorod in a litre-scale stirred-tank bioreactor. Our method is compatible with existing DNA origami design frameworks and retains the modularity and addressability of DNA origami objects that are necessary for implementing custom modifications using functional groups. With all of the production and purification steps amenable to scaling, we expect that our method will expand the scope of DNA nanotechnology in many areas of science and technology.

Polymorphic design of DNA origami structures through mechanical control of modular components.

Scaffolded DNA origami enables the bottom-up fabrication of diverse DNA nanostructures by designing hundreds of staple strands, comprised of complementary sequences to the specific binding locations of a scaffold strand. Despite its exceptionally high design flexibility, poor reusability of staples has been one of the major hurdles to fabricate assorted DNA constructs in an effective way. Here we provide a rational module-based design approach to create distinct bent shapes with controllable geometries and flexibilities from a single, reference set of staples. By revising the staple connectivity within the desired module, we can control the location, stiffness, and included angle of hinges precisely, enabling the construction of dozens of single- or multiple-hinge structures with the replacement of staple strands up to 12.8% only. Our design approach, combined with computational shape prediction and analysis, can provide a versatile and cost-effective procedure in the design of DNA origami shapes with stiffness-tunable units.

Triboelectric Nanogenerator Enabled Body Sensor Network for Self-Powered Human Heart-Rate Monitoring.

Heart-rate monitoring plays a critical role in personal healthcare management. A low-cost, noninvasive, and user-friendly heart-rate monitoring system is highly desirable. Here, a self-powered wireless body sensor network (BSN) system is developed for heart-rate monitoring via integration of a downy-structure-based triboelectric nanogenerator (D-TENG), a power management circuit, a heart-rate sensor, a signal processing unit, and Bluetooth module for wireless data transmission. By converting the inertia energy of human walking into electric power, a maximum power of 2.28 mW with total conversion efficiency of 57.9% was delivered at low operation frequency, which is capable of immediately and sustainably driving the highly integrated BSN system. The acquired heart-rate signal by the sensor would be processed in the signal process circuit, sent to an external device via the Bluetooth module, and displayed on a personal cell phone in a real-time manner. Moreover, by combining a TENG-based generator and a TENG-based sensor, an all-TENG-based wireless BSN system was developed, realizing continuous and self-powered heart-rate monitoring. This work presents a potential method for personal heart-rate monitoring, featured as being self-powered, cost-effective, noninvasive, and user-friendly.

Nanophotonic label-free biosensors for environmental monitoring.

The field of environmental monitoring has experienced a substantial progress in the last years but still the on-site control of contaminants is an elusive problem. In addition, the growing number of pollutant sources is accompanied by an increasing need of having efficient early warning systems. Several years ago biosensor devices emerged as promising environmental monitoring tools, but their level of miniaturization and their fully operation outside the laboratory prevented their use on-site. In the last period, nanophotonic biosensors based on evanescent sensing have emerged as an outstanding choice for portable point-of-care diagnosis thanks to their capability, among others, of miniaturization, multiplexing, label-free detection and integration in lab-on-chip platforms. This review covers the most relevant nanophotonic biosensors which have been proposed (including interferometric waveguides, grating-couplers, microcavity resonators, photonic crystals and localized surface plasmon resonance sensors) and their recent application for environmental surveillance.