Fortified versus incurred residues: extraction of furazolidinone metabolite from prawn.

Most methods reported in the literature for determination of nitrofuran metabolites use the same extraction and derivatisation conditions to hydrolyse and extract the protein-bound residues from animal tissue. While undertaking certification of reference materials for nitrofuran metabolites in freeze-dried prawn, it was found that these conditions are satisfactory for recovery of spiked residues; however, extraction efficiencies of incurred furazolidinone could be substantially increased by further optimisation of the extraction conditions. The availability of a suitable certified reference material allows laboratories to ensure that their method is optimised for incurred residues.

Enhanced electrogenerated chemiluminescence of tris(2,2'-bipyridyl)ruthenium(II) system by l-cysteine-capped CdTe quantum dots and its application for the determination of nitrofuran antibiotics.

This paper reports a new approach to enhance the electrogenerated chemiluminescence (ECL) of the tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)3(2+)) system using resonance energy transfer with l-cysteine-capped cadmium telluride quantum dots (CdTe-QDs) in aqueous solution. The oxidative peak signal of Ru(bpy)3(2+) occurred at a voltage of 1.10V when the potential was cycled between 0.4 and 1.6V using cyclic voltammetry with a carbon screen-printed electrode (SPE) in a 0.11M phosphate buffer at pH 7.50. The l-cysteine-capped CdTe-QDs were synthesized and added into the solution of Ru(bpy)3(2+) to magnify the ECL signal. The ECL emission signal was investigated and the extreme enhancement of the ECL intensity was achieved due to the energy transfer by the l-cysteine-capped CdTe-QDs. It was found that the induced ECL from the Ru(bpy)3(2+) CdTe-QDs system was inhibited by the presence of selected nitrofurans. This quenching effect of nitrofuran antibiotics on the anodic ECL of Ru(bpy)3(2+) CdTe-QDs was found to be selective and concentration dependent and was observed to have a linear relationship over the concentration range 10-100×10(-6)M. The detection limits were found to be 0.40, 0.73 and 0.60µM for furaltadone (FTD), furazolidone (FZD) and nitrofurantoin (NFT). In addition, the proposed ECL method was successfully applied to detect the total residuals of selected nitrofuran residues in animal feed samples with satisfactory results.

Screening method for the detection of a range of nitrofurans in avian eyes by optical biosensor.

An immunobiosensor assay was developed for the multi-residue screening of a range of nitrofuran compounds in avian eyes. A polyclonal antibody which binds at least 5 of the major parent nitrofurans was raised in a rabbit after inoculation with a nitrofuran mimic-protein conjugate. Sample homogenates were extracted into 0.1M hydrochloric acid and subjected to clean-up by solid phase extraction and micro-centrifugation prior to biosensor analysis. Validation data obtained from the analysis of 21 fortified samples has shown that the method has a detection capability (CCß) of less than 1 ng eye(-1) for nitrofurazone (NFZ). In addition, cross-reactivity data and the analysis of a smaller number of fortified samples have shown that the method will also detect a range of other major parent nitrofurans including furazolidone (FZD), furaltadone (FTD), nitrofurantoin (NFA) and nifursol (NFS). Intra-assay variation (n=10) was calculated at 12.9% and 10.1% at concentrations of 1 ng eye(-1) and 2 ng eye(-1) NFZ respectively. Inter-assay variation (n=3) was determined to be 10.8% and 4.7% at the same NFZ concentrations respectively. The cross-reactivity profile and validation data for the detection of these nitrofurans are presented together with the results obtained following the analysis of a small number of incurred samples using the developed method.

Separation and determination of nitrofuran antibiotics in turbot fish by microemulsion electrokinetic chromatography.

A microemulsion electrokinetic chromatography (MEEKC) method has been developed for the determination of four nitrofuran antibiotics (furazolidone (FZD), furaltadone (FTD), nitrofurazone (NFZ) and nitrofurantoin (NFT)) in turbot fish. The effect of buffer the pH, the concentration of SDS and the concentrations of octane and butan-1-ol were studied systematically. With the optimized experimental conditions (octane, 0.82% (w/w); SDS, 3.48% (w/w); butan-1-ol, 6.48% (w/w); and 10 mM sodium tetraborate buffer (pH 9.70), with 30 kV as the applied voltage) all four analytes were baseline-separated within 8 min. Regression equations revealed a good linear relationship between the peak area of each compound and its concentration. The correlation coefficients of the four analytes were from 0.9945 to 0.9999. The relative standard deviations of the migration times and the peak areas were <1.84 and 5.16% (intra-day). The obtained recovery ranged between 97 and 104%. Moreover, the method was successfully validated and applied to the determination of nitrofuran antibiotics in contaminated fish.

Simultaneous separation of nitrofuran antibiotics and their metabolites by using micellar electrokinetic capillary chromatography.

Mixtures comprising nitrofuran antibiotics (NFA) and nitrofuran metabolites (NFM) were resolved for the first time by using MEKC. Sodium deoxycholate (SDC) was chosen as the micelle-forming surfactant. Optimization of separation conditions was achieved by using a central composite experimental design (CCD) approach. Experimental parameters such as concentration ratio of borate to phosphate in the buffer, pH of the running electrolyte and voltage were investigated. The effect of concentration of the surfactant on resolution was significant. Under optimal conditions of 80 mM SDC, pH 9.0, (20 mM borate + 20 mM phosphate) and 16 kV, the resolution between eight consecutive peak pairs ranged from 1.9 to 11.8. Due to the absence of a UV-active chromophore in the metabolites, they were derivatized with 2-nitrobenzaldehyde (2-NBA). In order to mimic a proposed extraction procedure for the analysis of both NFA and/or derivatized NFM in a sample, aqueous samples (prederivatized with 2-NBA) were extracted by using C(18) SPE cartridges. After washing with H(2)O, the cartridges were eluted with a small portion of organic solvent with weak elution characteristics to remove excess 2-NBA (hexane was chosen). Target analytes were then recovered with ACN. Excellent reproducibility of migration time (t(mig)) was achieved for all analytes using the developed MECC approach, with absolute t(mig) <1% RSD and t(mig) ratio <0.2% RSD, and peak area ratio was 4% RSD. The LOD for each compound, calculated by extrapolating to an S/N of 3, were found to be 0.19-2.0 microg/mL.

Planar chromatography for the multiclass, multiresidue screening of chloramphenicol, nitrofuran, and sulfonamide residues in pork and beef.

A method is described for multiclass and multiresidue qualitative detection of chloramphenicol, nitrofuran, and sulfonamide residues in animal muscle. The drugs are extracted from 1 g tissue with 2 mL ethyl acetate and purified by silica solid-phase extraction. After elution of the cartridge, the collected solution is evaporated, and the residue is dissolved in methanol and chromatographed on a Si60 high-performance thin-layer chromatography plate. After evaporation of solvent, nitrofurans are visualized first by their specific UV photochemical reaction with pyridine. Then chloramphenicol is reduced to its amino derivative, and this derivative and the sulfonamides are visualized by long-wave UV after reaction with fluorescamine. Chloramphenicol, nitrofurans, and sulfonamides are detected at residue level of 10, 5, and 100 micrograms/kg, respectively, or less in pork and beef.

Mass spectrometry of 2-substituted 5-nitro-2-furyl thiazoles. Identification of microsomal nitroreduction products by electron impact mass spectrometry.

The electron impact mass spectral fragmentation of nitro heterocyclic carcinogens N-[4-(5-nitro-2-furyl)-2-thiazolyl]formamide, 2-amino-4-(5-nitro-2-furyl)thiazole, 2-methyl-4-(5-nitro-2-furyl)thiazole and 2-methylamino-4-(5-nitro-2-furyl)thiazole were studied. The molecular ions undergo two modes of cleavage: one giving [M-84]+ ions which include the 2-substituted thiazole ring, while the other gives rise to the fragment [M-74]+ ions. The products of anaerobic microsomal nitroreduction of 2-methyl-4-(5-nitro-2-furyl)thiazole were isolated and purified by high-pressure liquid chromatography. The metabolites undergo different fragmentation patterns compared to the parent nitro analogs. Metabolites from anaerobic enzymatic reduction showed identical gas chromatographic, high-pressure liquid chromatographic and thin-layer chromatographic properties to the chemically synthesized material. The metabolites were identified as 1-(2-methyl-4-thiazolyl)-3-cyano-1-propenone and 1-(2-methyl-4-thiazolyl)-3-cyano-1-propane by mass spectral fragmentation pattern.

Determination of nifuroxazide in biological fluids by automated high-performance liquid chromatography with large-volume injection.

A high-performance liquid chromatographic method for the measurement of nifuroxazide in plasma is described. The technique is based on the single extraction of the drug from buffered plasma with chloroform, using nifuratel as internal standard. The chromatographic system consisted of a 15 cm x 4.6 mm I.D. stainless-steel column packed with Spherisorb ODS, 5 micrometer, and the mobile phase was acetonitrile-orthophosphoric acid (pH 2.5) (30:70). The method was able to measure accurately plasma nifuroxazide concentrations down to 2 ng . ml-1 using 2 ml of sample with no interference from endogenous compounds. The coefficients of variation of the method at 200 and 2 ng . ml-1 were 3% and 15%, respectively, and the calibration graph was linear in this range. The use of automatic injection makes the method suitable for the routine analysis of large numbers of samples.