Trace multi-class organic explosives analysis in complex matrices enabled using LEGO®-inspired clickable 3D-printed solid phase extraction block arrays.

The development of a new, lower cost method for trace explosives recovery from complex samples is presented using miniaturised, click-together and leak-free 3D-printed solid phase extraction (SPE) blocks. For the first time, a large selection of ten commercially available 3D printing materials were comprehensively evaluated for practical, flexible and multiplexed SPE using stereolithography (SLA), PolyJet and fused deposition modelling (FDM) technologies. Miniaturised single-piece, connectable and leak-free block housings inspired by Lego® were 3D-printed in a methacrylate-based resin, which was found to be most stable under different aqueous/organic solvent and pH conditions, using a cost-effective benchtop SLA printer. Using a tapered SPE bed format, frit-free packing of multiple different commercially available sorbent particles was also possible. Coupled SPE blocks were then shown to offer efficient analyte enrichment and a potentially new approach to improve the stability of recovered analytes in the field when stored on the sorbent, rather than in wet swabs. Performance was measured using liquid chromatography-high resolution mass spectrometry and was better, or similar, to commercially available coupled SPE cartridges, with respect to recovery, precision, matrix effects, linearity and range, for a selection of 13 peroxides, nitramines, nitrate esters and nitroaromatics. Mean % recoveries from dried blood, oil residue and soil matrices were 79 ± 24%, 71 ± 16% and 76 ± 24%, respectively. Excellent detection limits between 60 fg for 3,5-dinitroaniline to 154 pg for nitroglycerin were also achieved across all matrices. To our knowledge, this represents the first application of 3D printing to SPE of so many organic compounds in complex samples. Its introduction into this forensic method offered a low-cost, 'on-demand' solution for selective extraction of explosives, enhanced flexibility for multiplexing/design alteration and potential application at-scene.

Liquid Chromatographic Method Development for Quantification of Inorganic Nitrite and Nitrate Impurities from Nitroglycerin Drug Substance by Using Ion-Pair Reagents with Liquid-Liquid Extraction Technique.

A large number of laboratory studies have reported Nitrite (NO2-) and Nitrate (NO3-) to be among the most common degradation products of the high-explosive Nitroglycerin drug substance. A novel, simple, robust and rapid reversed-phase high-performance liquid chromatography method has been developed for quantification of inorganic Nitrite and Nitrate impurities from Nitroglycerin drug substance. Successful separation was achieved in isocratic elution, using Inertsil C8-3, (250 × 4.6 mm, 5.0 µm) column, with mobile phase consisting of pH 7.0 tetrabutyl ammonium hydrogen sulfate buffer, methanol and acetonitrile (96:02:02, v/v/v). Flow rate was monitored at 2.0 mL min-1 and ultraviolet detection at 220 nm. The present work describes the role of an ion-pair reagent in the separation of polar compounds and liquid-liquid extraction technique for separation of polar and non-polar compounds. Nitroglycerin was subjected to various stress conditions to demonstrate the stability-indicating power of the method. The performance of the method was validated as per present International Council for Harmonisation (ICH) guidelines for specificity, linearity, accuracy, precision, ruggedness and robustness. The developed method can be a valuable alternative to the current ion-exchange chromatographic method mentioned in the literature. To the best of our knowledge, a rapid Liquid Chromatography (LC) method, which separates inorganic Nitrite and Nitrate impurities of Nitroglycerin, disclosed in this investigation was not published elsewhere.

Energetic contaminants inhibit plant litter decomposition in soil.

Individual effects of nitrogen-based energetic materials (EMs) 2,4-dinitrotoluene (2,4-DNT), 2-amino-4,6-dinitrotoluene (2-ADNT), 4-amino-2,6-dinitrotoluene (4-ADNT), nitroglycerin (NG), and 2,4,6,8,10,12-hexanitrohexaazaisowurtzitane (CL-20) on litter decomposition, an essential biologically-mediated soil process, were assessed using Orchard grass (Dactylis glomerata) straw in Sassafras sandy loam (SSL) soil, which has physicochemical characteristics that support "very high" qualitative relative bioavailability for organic chemicals. Batches of SSL soil were separately amended with individual EMs or acetone carrier control. To quantify the decomposition rates, one straw cluster was harvested from a set of randomly selected replicate containers from within each treatment, after 1, 2, 3, 4, 6, and 8 months of exposure. Results showed that soil amended with 2,4-DNT or NG inhibited litter decomposition rates based on the median effective concentration (EC50) values of 1122 mg/kg and 860 mg/kg, respectively. Exposure to 2-ADNT, 4-ADNT or CL-20 amended soil did not significantly affect litter decomposition in SSL soil at ≥ 10,000 mg/kg. These ecotoxicological data will be helpful in identifying concentrations of EMs in soil that present an acceptable ecological risk for biologically-mediated soil processes.

Storage of nitroglycerin (NTG) admixed with HBOC-201 for 30 days in polyolefin plastic bags: a pilot study.

Hemorrhaged animals have benefited from resuscitation with the hemoglobin-based oxygen carrier (HBOC-201). Co-infusion of nitric oxide (NO) via separate intravascular lines is effective in attenuating HBOC-induced elevation of blood pressure. We tested whether nitroglycerin (NTG) and HBOC-201 can be packaged together as a single drug for resuscitation. Since NTG binds easily to plastics such as polyvinylchloride, we assessed the stability of this combination in oxygen barrier double-layer ethylene-vinyl alcohol/polyolefin bags over a 30-day period. Outcome measures indicative of the stability of HBOC/NTG were reported as changes in levels of hemoglobin (Hb), methemoglobin (MetHb), NTG, and nitrite over time. Individual tightly sealed small aliquots of HBOC/NTG were prepared under nitrogen and analyzed in a timely fashion from 0 to 30 days using hematology instruments, HPLC, FPLC, and chemiluminescence. The level of NTG in the HBOC/NTG mixture was reduced significantly over time whereas it was stable in control mixtures of NTG/saline. The level of total Hb in the HBOC/NTG and HBOC/saline mixtures remained stable over time. MetHb formed and increased to 6% up to day 1 and then slowly decreased in the HBOC/NTG mixture whereas it remained unchanged in the HBOC/saline mixture. Nitrite was produced in the HBOC/NTG group upon mixing, was increased at day 1, and then became undetectable. The reaction between HBOC-201 and NTG occurring upon mixing and developing over time in polyolefin bags makes the long-term storage of this mixed combination inappropriate.

Use of Mass Spectrometric Vapor Analysis To Improve Canine Explosive Detection Efficiency.

Canines remain the gold standard for explosives detection in many situations, and there is an ongoing desire for them to perform at the highest level. This goal requires canine training to be approached similarly to scientific sensor design. Developing a canine training regimen is made challenging by a lack of understanding of the canine's odor environment, which is dynamic and typically contains multiple odorants. Existing methodology assumes that the handler's intention is an adequate surrogate for actual knowledge of the odors cuing the canine, but canines are easily exposed to unintentional explosive odors through training material cross-contamination. A sensitive, real-time (∼1 s) vapor analysis mass spectrometer was developed to provide tools, techniques, and knowledge to better understand, train, and utilize canines. The instrument has a detection library of nine explosives and explosive-related materials consisting of 2,4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT), 2,4,6-trinitrotoluene (TNT), nitroglycerin (NG), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), pentaerythritol tetranitrate (PETN), triacetone triperoxide (TATP), hexamethylene triperoxide diamine (HMTD), and cyclohexanone, with detection limits in the parts-per-trillion to parts-per-quadrillion range by volume. The instrument can illustrate aspects of vapor plume dynamics, such as detecting plume filaments at a distance. The instrument was deployed to support canine training in the field, detecting cross-contamination among training materials, and developing an evaluation method based on the odor environment. Support for training material production and handling was provided by studying the dynamic headspace of a nonexplosive HMTD training aid that is in development. These results supported existing canine training and identified certain areas that may be improved.

Progressing the analysis of Improvised Explosive Devices: Comparative study for trace detection of explosive residues in handprints by Raman spectroscopy and liquid chromatography.

Concerning the dreadful global threat of terrorist attacks, the detection of explosive residues in biological traces and marks is a current need in both forensics and homeland security. This study examines the potential of Raman microscopy in comparison to liquid chromatography (ion chromatography (IC) and reversed-phase high performance liquid chromatography (RP-HPLC)) to detect, identify and quantify residues in human handmarks of explosives and energetic salts commonly used to manufacture Improvised Explosive Devices (IEDs) including dynamite, ammonium nitrate, single- and double-smokeless gunpowders and black powder. Dynamite, ammonium nitrate and black powder were detected through the identification of the energetic salts by Raman spectroscopy, their respective anions by IC, and organic components by RP-HPLC. Smokeless gunpowders were not detected, either by Raman spectroscopy or the two liquid chromatography techniques. Several aspects of handprint collection, sample treatment and a critical comparison of the identification of compounds by both techniques are discussed. Raman microscopy and liquid chromatography were shown to be complementary to one another offering more comprehensive information for trace explosives analysis.

Expanding Biosensing Abilities through Computer-Aided Design of Metabolic Pathways.

Detection of chemical signals is critical for cells in nature as well as in synthetic biology, where they serve as inputs for designer circuits. Important progress has been made in the design of signal processing circuits triggering complex biological behaviors, but the range of small molecules recognized by sensors as inputs is limited. The ability to detect new molecules will increase the number of synthetic biology applications, but direct engineering of tailor-made sensors takes time. Here we describe a way to immediately expand the range of biologically detectable molecules by systematically designing metabolic pathways that transform nondetectable molecules into molecules for which sensors already exist. We leveraged computer-aided design to predict such sensing-enabling metabolic pathways, and we built several new whole-cell biosensors for molecules such as cocaine, parathion, hippuric acid, and nitroglycerin.

Assessing the evidentiary value of smokeless powder comparisons.

Gas chromatography-electron ionization-mass spectrometry (GC-EI-MS) and physical characteristics data for 726 smokeless reloading powders were analyzed by pairwise comparisons of samples comprising the same product and different products. Pairwise comparisons were restricted to samples having matching kernel shape, color, presence or absence of a perforation and measurements. Discrete results were analyzed for same and different products having matching chemical composition determined from a list of 13 organic components. A continuous score-based likelihood ratio was determined for same and different product comparisons using the Fisher transform of the Pearson correlation between the total ion spectra of the compared samples. Probability distributions for same product and different product comparisons appeared bimodal and were modeled with kernel density distributions. In the discrete and continuous data comparisons, the likelihood ratios for probabilities conditioned on same shape, color, presence/absence of perforation and size were found to provide relatively limited support for either the proposition of same product or different product. Further restricting the pairwise comparisons to samples belonging to the same cluster, as determined by agglomerative hierarchical cluster analysis, provided probability distributions for same product and different product comparisons that were more normal, but did not improve the resulting likelihood ratios. These results inform the forensic analyst regarding the evidentiary value of database search results and direct comparisons of recovered and control samples of smokeless powders.

Doxycycline Attenuates Endotoxin-Induced Uveitis by Prostaglandin E2-EP4 Signaling.

PURPOSE: We explored the anti-inflammatory effects of doxycycline in experimental uveitis and the underlying mechanisms. METHODS: Rats with endotoxin-induced uveitis (EIU) received doxycycline (1.5 mg/kg) or the control vehicle via intraperitoneal injection. Clinical scores were graded under a slit lamp. Rat peritoneal macrophages were used in vitro to further explore the anti-inflammatory mechanisms of doxycycline. The levels of nitric oxide (NO), TNF-α, IL-1ß, prostaglandin E2 (PGE2), cyclooxygenase (COX)-2, I kappa B-α (IκB-α), inducible nitric oxide synthase (iNOS), Akt, caspase-3, and nuclear factor-kappa B (NF-κB) were analyzed. RESULTS: Treatment with doxycycline dramatically reduced the clinical scores of EIU (P < 0.001), with significant decreases in inflammatory cell infiltration, protein concentrations, and the production of NO, TNF-α, and IL-1ß in the aqueous humor (AqH). In vitro, doxycycline significantly inhibited the production of NO, IL-1ß, and TNF-α in peritoneal macrophages by modulating the PI3K/Akt/IκB-α/NF-κB pathway. Importantly, we found that doxycycline significantly enhanced COX2 expression and PGE2 production both in vivo and in vitro. More importantly, blockade of the EP4 receptor of PGE2 significantly reversed the doxycycline-mediated inhibition of macrophages and the PI3K/Akt pathway in vitro. Furthermore, simultaneous injection of an EP4 antagonist and doxycycline significantly blocked the doxycycline-mediated attenuation of EIU. CONCLUSIONS: Doxycycline can ameliorate EIU, and PGE2-EP4 signaling is essential for the anti-inflammatory effects of doxycycline in vitro and in vivo.

Near infrared spectral imaging for the analysis of dynamite residues on human handprints.

This study examines the utility of near infrared hyperspectral imaging (NIR-HSI) combined with chemometrics for the detection of dynamite residues on human handprints. Polyvinyl sheets containing dynamite residues were then analysed with the NIR-HSI system. A spectral library was developed by using partial least squares-discriminant analysis model (PLS-DA) to detect and classify the pixels contaminated with the dynamite residues. Values of sensitivity and specificity of 100% were obtained for both calibration and cross validation of dynamite and ammonium nitrate. The results were tested in real human handprints. Seven volunteers deposited their handprints into polyvinyl transparent sheets after the manipulation of a common type of dynamite which was mainly composed by ammonium nitrate. These results highlight the extremely high potential and capability of NIR-HSI combined with chemometrics for the fast and easy identification of explosive residues and additionally, its potential competence to detect the explosive manipulation.

Nitroglycerin degradation mediated by soil organic carbon under aerobic conditions.

The presence of nitroglycerin (NG) has been reported in shallow soils and pore water of several military training ranges. In this context, NG concentrations can be reduced through various natural attenuation processes, but these have not been thoroughly documented. This study aimed at investigating the role of soil organic matter (SOM) in the natural attenuation of NG, under aerobic conditions typical of shallow soils. The role of SOM in NG degradation has already been documented under anoxic conditions, and was attributed to SOM-mediated electron transfer involving different reducing agents. However, unsaturated soils are usually well-oxygenated, and it was not clear whether SOM could participate in NG degradation under these conditions. Our results from batch- and column-type experiments clearly demonstrate that in presence of dissolved organic matter (DOM) leached from a natural soil, partial NG degradation can be achieved. In presence of particulate organic matter (POM) from the same soil, complete NG degradation was achieved. Furthermore, POM caused rapid sorption of NG, which should result in NG retention in the organic matter-rich shallow horizons of the soil profile, thus promoting degradation. Based on degradation products, the reaction pathway appears to be reductive, in spite of the aerobic conditions. The relatively rapid reaction rates suggest that this process could significantly participate in the natural attenuation of NG, both on military training ranges and in contaminated soil at production facilities.

In vitro organic nitrate bioactivation to nitric oxide by recombinant aldehyde dehydrogenase 3A1.

Organic nitrates (ORNs) are commonly used anti-ischemic and anti-anginal agents, which serve as an exogenous source of the potent vasodilator nitric oxide (NO). Recently, both mitochondrial aldehyde dehydrogenase-2 (ALDH2) and cytosolic aldehyde dehydrogenase-1a1 (ALDH1A1) have been shown to exhibit the ability to selectively bioactivate various ORNs in vitro. The objective of the present research was to examine the potential role of ALDH3A1, another major cytosolic isoform of ALDH, in the in vitro bioactivation of various ORNs, and to estimate the enzyme kinetic parameters toward ORNs through mechanistic modeling. The extent of bioactivation was assayed by exposing recombinant ALDH3A1 to various concentrations of ORNs, and measuring the concentration-time profiles of released NO via a NO-specific electrode. Metabolite formation kinetics was monitored for nitroglycerin (NTG) using LC/MS/MS. Our results showed that ALDH3A1 mRNA and protein were highly expressed in C57BL/6 mouse aortic, cardiac, and hepatic tissues, and it was able to release NO from several ORNs, including NTG, isosorbide dinitrate (ISDN), isosorbide-2-mononitrate (IS-2-MN), and nicorandil with similar Vmax (0.175-0.503nmol/min/mg of ALDH3A1), and Km values of 4.01, 46.5, 818 and 5.75×10(3)µM, respectively. However, activation of isosorbide-5-mononitrate (IS-5-MN) by ALDH3A1 was undetectable in vitro. ALDH3A1 was also shown to denitrate NTG, producing primarily glyceryl 1,2-dinitrate (1,2-GDN) in preference to glyceryl 1,3-dinitrate (1,3-GDN). Therefore, ALDH3A1 may contribute to the bioactivation of ORNs in vivo.

Stability of nitroglycerin 110 mcg/mL stored in polypropylene syringes.

Various angiography procedures at Mayo Clinic (Rochester campus) require small bolus doses of injectable nitroglycerin. Commercially acquired containers of injectable nitroglycerin provide excessive amounts of drug for these procedural needs, so syringes were chosen as a container for dispensing of the dose needed. Due to nitroglycerin's known chemical attributes of volatility and sorption to plastic surfaces, careful consideration of the stability needs to be taken into account when storing in a syringe. Since there is a lack of stability information in the literature, we studied the stability of nitroglycerin in polypropylene syringes over 90 days. Methods used for this study consisted of a validated stability-indicating high-performance liquid chromatographic assay, visual appearance, and pH. Samples were stored protected from light at ambient controlled temperature and consisted of nitroglycerin 110 mcg/mL in 5% dextrose injection 10.1 mL in 12 mL Terumo polypropylene syringes. Samples were tested at intervals up to 90 days. Results from the visual portion of the study showed clear, colorless, and particulate-free solutions throughout the 90-day study period. The pH results started at 4.27 +/- 0.13 (day 0) and ranged from 4.19 +/- 0.17 to 4.92 +/- 0.43 throughout the study period. Potency test results revealed a day 0 concentration of 104.242 +/- 0.193 mcg/mL (batch 1) and 122.483 +/- 0.168 mcg/mL (batch 2). Results trended downward with percentage of day 0 concentration of 92.2% +/- 2.4% at day 14 and of 81.4% +/- 4.9% at day 90. Chromatographic profiles of the samples exhibited insignificant changes over the study period. The nitroglycerin peak was spectrally pure based on peak-purity analysis, suggesting that sorption to the polypropylene syringe is one possible reason for the concentration decline over time, but nitroglycerin is a volatile compound and loss through vaporization cannot be ruled out. Nitroglycerin 110 mcg/mL in 5% dextrose injection, packaged in Terumo polypropylene syringes with 10.1 mL aliquots, maintained 90% of syringe potency for 24 days when stored protected from light under controlled ambient conditions.

Migration kinetics and mechanisms of plasticizers, stabilizers at interfaces of NEPE propellant/HTPB liner/EDPM insulation.

Migration appeared in the interfaces of nitrate ester plasticized polyether (NEPE) based propellant/hydroxyl-terminated polybutadiene (HTPB) based liner/ethylene propylene terpolymer (EPDM) based insulation was studied by aging at different temperatures. The migration components were extracted with solvent and determined by high performance liquid chromatography (HPLC). The migration occurred within 1mm to the interfaces, and the apparent migration activation energy (Ea) of nitroglycerin (NG), 1,2,4-butanetriol trinitrate (BTTN) and a kind of aniline stabilizer AD in propellant, liner and insulation was calculated respectively on the basis of HPLC data. The Ea values were among 15 and 50 kJ/mol, which were much less than chemical energy, and almost the same as hydrogen bond energy. The average diffusion coefficients were in the range of 10(-19)m(2)s(-1) to 10(-16)m(2)s(-1). It seemed the faster the migration rates, the smaller the apparent migration activation energy, the larger the diffusion coefficient and the less the amount of migration. It could be explained that the migration rate and energy were affected by the molecular volume of a mobile component and its diffusion property, and the amount of migration was resulted from the molecular polarity comparability of a mobile component to the based material.

Solid-phase extraction using hierarchical organosilicates for enhanced detection of nitroenergetic targets.

A novel porous organosilicate material was evaluated for application as a solid phase extraction sorbent for preconcentration of nitroenergetic targets from aqueous solution prior to HPLC analysis. The performance of the sorbent in spiked deionized water, groundwater, and surface water was evaluated. Targets considered included 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, RDX, HMX, and nitroglycerin. The sorbent was shown to provide improved performance over Sep-Pak RDX. The impact of complex matrices on target preconcentration by the sorbent was also found to be less dramatic than that observed for LiChrolut EN. The impact of changes in pH on target preconcentration was considered. Aqueous soil extracts generated from samples collected at sites of ordnance testing were also used to evaluate the materials. The results presented here demonstrate the potential of this novel sorbent for application as a solid phase extraction material for the preconcentration of nitroenergetic targets from aqueous solutions.

Molecularly imprinted Au nanoparticles composites on Au surfaces for the surface plasmon resonance detection of pentaerythritol tetranitrate, nitroglycerin, and ethylene glycol dinitrate.

Molecularly imprinted Au nanoparticles (NPs) composites are generated on Au-coated glass surfaces. The imprinting process involves the electropolymerization of thioaniline-functionalized Au NPs (3.5 nm) on a thioaniline monolayer-modified Au surface in the presence of a carboxylic acid, acting as a template analogue for the respective explosive. The exclusion of the imprinting template from the Au NPs matrix yields the respective imprinted composites. The binding of the analyte explosives to the Au NPs matrixes is probed by surface plasmon resonance spectroscopy, SPR, where the electronic coupling between the localized plasmon of the Au NPs and the surface plasmon wave leads to the amplification of the SPR responses originating from the dielectric changes of the matrixes upon binding of the different explosive materials. The resulting imprinted matrixes reveal high affinities and selectivity toward the imprinted explosives. Using citric acid as an imprinting template, Au NPs matrixes for the specific analysis of pentaerythritol tetranitrate (PETN) or of nitroglycerin (NG) were prepared, leading to detection limits of 200 fM and 20 pM, respectively. Similarly, using maleic acid or fumaric acid as imprinting templates, high-affinity sensing composites for ethylene glycol dinitrate (EGDN) were synthesized, leading to a detection limit of 400 fM for both matrixes.

Degradation of trinitroglycerin (TNG) using zero-valent iron nanoparticles/nanosilica SBA-15 composite (ZVINs/SBA-15).

Trinitroglycerin (TNG) is an industrial chemical mostly known for its clinical use in treating angina and manufacturing dynamite. The wide manufacture and application of TNG has led to contamination of vast areas of soil and water. The present study describes degradation of TNG with zero-valent iron nanoparticles (ZVINs) in water either present alone or stabilized on nanostructured silica SBA-15 (Santa Barbara Amorphous No. 15). The BET surface areas of ZVINs/SBA-15 (275.1 m2 g(-1)), as determined by nitrogen adsorption-desorption isotherms, was much larger than the non-stabilized ZVINs (82.0 m2 g(-1)). X-ray diffraction (XRD) showed that iron in both ZVINs and ZVINs/SBA-15 was present mostly in the α-Fe0 crystalline form considered responsible for TNG degradation. Transmission Electron Microscopy (TEM) showed that iron nanoparticles were well dispersed on the surface of the nanosilica support. Both ZVINs and ZVINs/SBA-15 degraded TNG (100%) in water to eventually produce glycerol and ammonium. The reaction followed pseudo-first-order kinetics and was faster with ZVINs/SBA-15 (k1 0.83 min(-1)) than with ZVINs (k1 0.228 min(-1)). The corresponding surface-area normalized rate constants, knorm, were 0.36 and 0.33 L h(-1) m(-2) for ZVINs/SBA-15 and ZVINs, respectively. The ZVINs/SBA-15 retained its original degradation efficiency of TNG after repeatedly reacting with fresh nitrate ester for five successive cycles. The rapid and efficient transformation of TNG with ZVINs/SBA-15, combined with excellent sustained reactivity, makes the nanometal an ideal choice for the clean up of water contaminated with TNG.

New protocol for the isolation of nitrocellulose from gunpowders: utility in their identification.

In this work, a new approach for the isolation of nitrocellulose from smokeless gunpowders has been developed. A multistep solvent extraction method was needed to purify nitrocellulose contained in gunpowders. For single-base or double-base gunpowders six consecutive solvent extractions were selected: three extractions with methanol (to remove nitroglycerin, 2,4-dinitrotoluene, ethyl-centralite, diphenylamine, and diphenylamine derivatives); one extraction with dichloromethane (to remove colorants and plasticizers of organic nature); one extraction with methanol (to facilitate a final polar extraction); and one extraction with water (to remove ionic components) were necessary at 35 degrees C. For the triple-base gunpowder studied, eight solvent extractions were needed due to a high concentration of the water-soluble nitroguanidine was present. In addition to the same five initial phases used for the single-base and double-base gunpowders, three water extraction phases at a higher temperature (75 degrees C instead of 35 degrees C) were also needed. A final step to solubilize nitrocellulose in methyl ethyl ketone was used to remove inert components (mainly graphite). Nitrocellulose isolated from these propellants was characterized by Fourier-Transformed Infrared Spectroscopy (FTIR spectroscopy). The same FTIR spectra were observed for nitrocelluloses isolated from different types of gunpowders. A comparison of FTIR spectra of nitrocellulose samples of different nitration degree evidenced that the bands regions most affected by this factor were: 3600-3400cm(-1), corresponding to the stretching vibrations of residual hydroxyl groups; 1200-1000cm(-1), attributed to the valence vibrations nuCO of the glucopyranose cycle; and 750-690cm(-1), assigned to vibrations of the nitrate group. In both cases, the bands appearing in these regions were more pronounced in the spectra of nitrocellulose samples of low nitration degree.

Microwave-assisted hydrolysis of nitroglycerin (NG) under mild alkaline conditions: new insight into the degradation pathway.

Nitroglycerin (NG), a nitrate ester, is widely used in the pharmaceutical industry and as an explosive in dynamite and as propellant. Currently NG is considered as a key environmental contaminant due to the discharge of wastewater tainted with the chemical from the military and pharmaceutical industry. The present study describes hydrolytic degradation of NG (200 microM) at pH 9 using either conventional or microwave-assisted heating at 50 degrees C. We found that hydrolytic degradation of NG inside the microwave chamber was much higher than its degradation using conventional heating. Products distributions in both heating systems were closely related and included nitrite, nitrate, formic acid, and the novel intermediates 2-hydroxypropanedial (OCHCH(OH)HCO) and glycolic acid (CH2(OH)COOH). Two other intermediates glycolaldehyde (CH2(OH)CHO) and glyoxylic acid (CHOCOOH) were only detected in the microwave treated samples. The molar ratio of nitrite to nitrate in the presence and absence of microwave heating was 2.5 and 2.8, respectively. In both microwave assisted and conventional heating a nitrogen mass balance of 96% and 98% and a carbon mass balance of 58% and 78%, respectively, were obtained. The lower C mass recovery might be attributed to further unknown reactions, e.g., polymerization of the aldehydes CH2(OH)CHO, CHOCOOH and OCHCH(OH)HCO. A hydrolytic degradation pathway for NG was proposed involving denitration (loss of 2 NO2(-)) from the two primary carbons and the loss of one nitrate from the secondary carbon to produce 2-hydroxypropanedial.

Energetic residues from field disposal of gun propellants.

Military training with howitzers and mortars produces excess propellant that is burned on the training range and can result in point sources containing high concentrations of unreacted propellant constituents. Propellants contain energetic compounds such as nitroglycerin (NG) and 2,4-dinitrotoluene (2,4-DNT), both of which are found at firing positions and propellant disposal areas. To quantify the mass of residue remaining from the field-expedient disposal of propellants, two mortar propellants and one howitzer propellant were burned under different field conditions. These conditions included burning on a snow pack, at the bottom of a snow pit, and in a pan surrounded by snow for the mortar propellants and on dry and wet sand for the howitzer propellant. For the mortar propellant, the energetics (NG) remaining after burning in the bowl, on frozen ground, and on snow were 0.21%, 5.2% and 18%, respectively. For the howitzer propellant, the difference in energetics (2,4-DNT) remaining after disposal on wet and dry sand was <0.1%, with the overall residue rate of around 1%, similar to that for the mortar propellant burned in an open container. These tests demonstrate that environmental factors, especially in winter, can play a significant role in the effectiveness of field-expedient disposal of propellants.