Simultaneous determination of three organotin pesticides in fruits and vegetables by high-performance liquid chromatography/tandem mass spectrometry.

RATIONALE: The presence of organotins in the environment affects food safety, making it important to monitor the levels of organotin pesticides (OTPs) in fruit and vegetable samples. METHODS: In the present study, a simple and low cost method for simultaneous determination of three OTPs (azocyclotin, fenbutatin oxide and triphenyltin hydroxide) in vegetable and fruit samples was developed and validated, based on solid-phase extraction and liquid chromatography/tandem mass spectrometry. RESULTS: Extraction with acetonitrile containing 0.2% formic acid positively affected the recoveries of the three OTPs. Moreover, the simultaneous purification of the three OTPs was the most efficient using mixed-mode cation-exchange cartridges and 5.0% ammonium hydroxide in methanol as eluent, and, in this case, mild matrix effects (-9.3% to 21.6%) were obtained for the three OTPs monitored. The developed method reached limits of quantification of 1 µg kg-1 , and linearity was satisfactory, with correlation coefficients >0.995. A fortification study showed that when spiked at 1.0-50.0 µg kg-1 the mean trueness values were from 72.3 to 110.0% in all matrices (three vegetables and three fruits). The intra-day precision was <14.1%, and the inter-day precision (n = 11) was <18.2%. CONCLUSIONS: The proposed method was successfully applied to the simultaneous analysis of three OTPs in vegetables and fruits.

Efficient dibutyltin (DBT) elimination by the microscopic fungus Metarhizium robertsii under conditions of intensive aeration and ascorbic acid supplementation.

Dibutyltin (DBT) is an environmental pollutant characterized by immunotoxic, neurotoxic, and pro-oxidant properties. In this study, an attempt was made to enhance DBT elimination by the Metarhizium robertsii strain. We observed enhanced fungal growth in the bioreactor (pO2 ≥ 20%) compared to flask cultures (µ max increased from 0.061 to 0.086 h-1). Moreover, under aerated conditions, M. robertsii mycelium with "hairy" morphology biodegraded DBT (20 mg l-1) 10-fold faster in the bioreactor than in the flask cultures. Monobutyltin (MBT) and a hydroxylated derivative of MBT (OHBuSnH2) were detected as by-products of dibutyltin debutylation. Simultaneous usage of glucose and butyltins indicates the comatabolic nature of monobutyltin and dibutyltin removal. In order to protect fungal cells from oxidative stress caused by DBT presence, vitamin C (20 mg l-1) was applied. Supplementation with ascorbic acid (AA) resulted in a 3-fold acceleration of MBT removal during the first 7 h of incubation. Using the HPLC-MS/MS technique, a quantitative analysis of malondialdehyde (MDA), a marker of oxidative stress, was performed. In the AA presence, a decrease in the MDA amount (about 45%) was observed compared to the case with fungal cells exposed to DBT alone.

Speciation of methyltins by dispersive liquid-liquid microextraction and gas chromatography with mass spectrometry.

Dispersive liquid-liquid microextraction in combination with an in situ derivatization is suggested for methyltin compound sampling and preconcentration from water solutions. The derivatization was carried out with sodium tetraethylborate at pH 3. The effects of extraction and disperser solvents type, volume, and extraction time on the extraction efficiency were investigated. 1,2-Dichlorobenzene was used as an extraction solvent and ethanol was used as a disperser solvent. The calibration graphs for all the analytes were linear up to 2 µg (Sn) L(-1), correlation coefficients were 0.998-0.999, LODs were 0.13, 0.05, and 0.06 ng (Sn) L(-1) for trimethyltin, DMT, and monomethyltin, respectively. Repeatabilities of the results were acceptable with RSDs up to 12.1%. A possibility to apply the proposed method for methyltin compound determination in water samples was demonstrated.

Development of a fast capillary electrophoresis-time-of-flight mass spectrometry method for the speciation of organotin compounds under separation conditions of high electrical field strengths.

A novel approach has been developed for the separation of organotin species with capillary electrophoresis hyphenated to time-of-flight mass spectrometry. It has been applied to the development of a method for the determination and speciation of organotin compounds namely, dibutyltin (DBT), tributyltin (TBT), diphenyltin (DPT) and triphenyltin (TPT) in water samples. Experiments were made with a special laboratory constructed CE instrument. A non-aqueous buffer system compatible with TOF-MS has been developed using ammonium acetate-acetic acid (50 mM and 1 M) in acetonitrile: methanol (80:20). The total analysis time is less than 3 min for these compounds under the conditions developed. The method has been applied successfully to the determination of these compounds in river water samples. Detection limits of the CE-TOF-MS method were between 1 and 8×10(-7) M, and between 2 and 11×10(-9) M (0.46 to 3.2 µg L(-1)) when used in conjunction with solid phase extraction. The short analysis time as well as good sensitivity and selectivity make it a useful approach for the fast screening of organotin compounds.

Simultaneous determination of organotin compounds in textiles by gas chromatography-flame photometry following liquid/liquid partitioning with tert-butyl ethyl ether after reflux-extraction.

A rapid and relatively clean method for determining six organotin compounds (OtC) in textile goods with a gas chromatograph equipped with a conventional flame photometric detector (GC-FPD) has been developed. After the reflux-extraction to use methanol containing 1% (v/v) of hydrochloric acid, five hydrophobic OtC (e.g. tributyltin: TBT) and slightly less hydrophobic dibutyltin (DBT) could be drawn out through partitioning between the methanolic buffer solution and tert-butyl ethyl ether instead of hazardous dichloromethane, of which usage is provided by the official-methods notified in Japan, and following the ethylation procedure to use sodium tetraethylborate, the OtC were determined with the GC-FPD. The recoveries of DBT, TBT, tetrabutyltin, triphenyltin, dioctyltin, and trioctyltin from textile products (cloth diaper, socks, and undershirt) were 60-77, 89-98, 86-94, 71-78, 85-109, and 70-79% respectively, and their coefficients of variation were 2.5-16.5%. Calibration curves for OtC were linear (0.01-0.20 µg as Sn mL(-1)), and the correlation coefficients were 0.9922-1.0000. Their detection limits were estimated to be 2.7-9.7 n gas Sn g(-1). These data suggested that this method would be applicable to their simultaneous determination. Five retailed textile goods were analyzed by this proposed method, and 0.013-0.65 µg as Sn g(-1) of OtC (e.g. DBT) were determined in three. Moreover, a possibility that various OtC including non-targeted species in textile would be specifically detected by applying the studying speciation-technique of controlling signal intensity-flame fuel gas pressures of the GC-FPD was found.

Headspace sorptive extraction for the analysis of organotin compounds using thermal desorption and gas chromatography with mass spectrometry.

A method based on headspace sorptive extraction (HSSE) in combination with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) has been developed for the simultaneous determination of six organotin compounds (OTCs), corresponding to mono- and di-substituted methyltin, butyltin and octyltin species. Several parameters affecting both the headspace extraction and thermal desorption steps were carefully optimized using multivariate designs. Analytes were derivatized by in situ ethylation with sodium tetraethylborate. The optimized method was applied to the analysis of water samples of different origins, as well as to checking the migration of the studied compounds from commercially available plastic containers to the adequate liquid simulant. Quantification was carried out against aqueous calibration curves using diphenyltin as internal standard, providing detection limits of between 1.7 and 7.0 ng(Sn) L(-1), depending on the compound, and repeatabilities lower than 10% in terms of relative standard deviation. The applicability of the method was assessed by means of recovery studies and satisfactory values for all compounds were attained. The release of OTCs from the tested packages to the liquid simulant was confirmed, concentrations as high as 2.4 µg(Sn) L(-1) being found for dioctyltin. Even though the proposed method was developed for organotin halides, its application to an organotin ester shows its suitability for determining these compounds in migration assays.

Biosorption and biodegradation of triphenyltin by Brevibacillus brevis.

Triphenyltin (TPT) is an endocrine disruptor highly toxic to non-target organisms, and has contaminated the environment worldwide. To accelerate TPT elimination, the study on the behavior and mechanism of TPT biosorption and biodegradation by Brevibacillus brevis was conducted. The results revealed that TPT and coexisted Cu2+, Cd2+, Pb2+ and Zn2+ in solution could be adsorbed effectively by B. brevis, and TPT was further transformed to diphenyltin, monophenyltin and tin intracellularly. The removal efficiency of 0.5 mg L(-1) TPT after degradation by 0.3 g L(-1) biomass for 5d was about 60%. Suitable kinds and levels of oxygen, nutrient, surfactant and metals obviously improved TPT biodegradation. When concentrations of H2O2, glucose, rhamnolipid, Cu2+ and Zn2+ varied from 1.5 to 6 mmol L(-1), 0.5 to 5 mg L(-1), 5 to 25 mg L(-1), 0.5 to 6 mg L(-1) and 0.5 to 1 mg L(-1), separately, TPT biodegradation efficiencies increased 15-25%.

Critical evaluation of fiber coatings for organotin determination by using solid phase microextraction in headspace mode.

In the present work three different SPME fibers have been investigated for simultaneous determination of methyl-, butyl- and phenyltins by using gas chromatography-pulsed flame photometer detection (GC-PFPD). The optimal experimental conditions for each fiber were determined and the respective figures of merit were evaluated. All fiber evaluated presented similar limit of detection (sub ng L⁻¹) and requires two internal standards to reach an acceptable repeatability. However, the CAR-PDMS fiber offers the best compromise between selectivity and sensibility for determination of organotins selected. The developed method was validated for analysis of certified reference material and spiked samples, obtaining satisfactory results. Finally, some contaminated samples were analyzed demonstrating the applicability of developed method for determination of organotin compounds in the environment and for monitoring their biochemical cycle.

Determination of methyltin compounds in urine of occupationally exposed and general population by in situ ethylation and headspace SPME coupled with GC-FPD.

A method for the determination of methyltin compounds in human urine samples was developed using headspace solid-phase microextration (HS-SPME) coupled with gas chromatographic separation and flame photometric detection. Three methyltin compounds, monomethyltin (MMT), dimethyltin (DMT), and trimethyltin (TMT) were in situ ethylated by sodium tetraethylborate (NaBEt(4)) for SPME and GC-FPD analysis. Under the optimized condition, the detection limits of MMT, DMT, and TMT were 8.1, 2.5 and 5.6 ng Sn L(-1), and the relative standard deviations were 11.0%, 7.3% and 4.0%, respectively. Methyltin compounds in thirteen urine samples from occupationally exposed population and two from general population were analyzed by the proposed method. The concentrations of total methyltin in the tested urine samples of occupationally exposed population ranged from 26.0 to 7892 ng Sn L(-1), and the average level is higher than those of the two non-occupationally exposed individuals. The methyltins in urine were adjusted by osmolality in order to enhance the comparability of different urine samples and the feasibility of this correction method was validated.

[Effect of heavy metal ions on triphenyltin enzymatic degradation].

The influence of different metal ions and different forms of addition on triphenyltin enzymatic degradation was investigated under conditions using enzyme obtained from Klebsiella pneumoniae. The objective of this study is to illuminate the mechanism of enzymatic degradation of triphenyltin (TPhT). The results demonstrated that the strain was able to tolerate K+, Mg2+, CU2+, Ca2+ and Fe3+ at high concentrations. High concentrations of Zn2+ and Fe2+ had some toxic effects on the strain, thus affecting its growth. The endoenzyme activity was enhanced by metal ions such as K+, Mg2+, Zn2+, Cu2+ and Fe2+ at certain concentrations. In the presence of 30 mg/L of Mg2+, the removal percentage of TPhT was up to 77.22%. Fe3+ restrained the enzyme activity at certain concentrations. Adding K+, Mg2+, Zn2+, Cu2+ into medium can promote the production of enzyme, among which Mg2+ demonstrated up to 85.66% of removal percentage of TPhT, suggesting some metal ions at the appropriate concentration range can be used as enzyme activator for the enzymatic degradation of triphenyltin. Metal ions showed no relevant impact on the cell growth and enzyme production. Certain metal ions can only serve as activators of endoenzyme and exhibited no similar effect towards exoenzyme.

[Characteristics of biodegradation of triphenyltin by Rhodopseudomonos spheroids].

The biodegradation of triphenyltin (TPT) by Rhodopseudomonos spheroids was investigated in this study. The results illuminated that R. spheroids was an effective strain for the biodegradation of TPT. The maximum removal ratio was attained when the growth temperature of R. spheroids was 30 degrees C. After treating for 3 hours, the removal ratios of 3 mg x L(-1) TPT were 13.82% to 47.29% using 0.49 g x L(-1) (based on dry weight) biomass of R. spheroids. The experiments on biodegradation of TPT were carried out in double-distilled water, simulated seawater,culture medium and river water, respectively. The results demonstrated that river water was optimal for the biodegradation since the indigenous microorganisms in water synergistically increased the removal ratios of TPT. Extracellular enzyme produced by R. spheroids was also effective on the degradation of TPT, and 71.64% of TPT was degraded by this way within 24 hours. The experiments also revealed that the biodegradation process of TPT included biosorption by cell wall, TPT entering cells, and initial degradation by intracellular enzyme, then the TPT and intermediate products backing out of cells to be degraded by extracellular enzyme.

Occurrence and chemical speciation analysis of organotin compounds in the environment: a review.

Environmental concerns regarding organotin compounds have increased remarkably in the past 20 years, due in large part to the use of these compounds as active components in antifouling paints [mainly tributyltin (TBT)] and pesticide formulations [mainly triphenyltin (TPhT)]. Their direct introduction into the environment, their bio-accumulation and the high toxicity of these compounds towards "non-target" organisms (for example: oysters and mussels) causes environmental and economic damage around the world. As a consequence, the presence and absence of organotin compounds is currently monitored in a range of environmental matrices (e.g., water, sediment and shellfish) to examine the utility of controls meant to regulate the level of contamination as required in some EC Directives and the Water Framework Directive 2000/60/EC. To evaluate the environmental distribution and fate of these compounds and to determine the effectives of legal provisions adopted by a number of countries, a variety of analytical methods have been developed for organotin determination in the environment. Most of these methods include different steps such as extraction, derivatisation and clean up. The aim of the present review is to evaluate the environmental distribution, fate and chemical speciation of organotin compounds in the environment.

Potassium carbonate-silica: a highly effective stationary phase for the chromatographic removal of organotin impurities.

Organotin impurities in product mixtures can be reduced from stoichiometric levels to approximately 15 parts per million by column chromatography using 10% w/w anhydrous potassium carbonate-silica as a stationary phase.

[Characteristics of biodegradation of triphenyltin by enzyme obtained from Klebsiella pneumoniae].

The objective of this study is to illuminate the mechanism of biodegradation of triphenyltin (TPhT). The removal of TPhT by Klebsiella pneumoniae was, therefore, investigated through characteristics studies. The influences of the various parameters were also discussed. The results demonstrated that the cell, extracellular secretion and intracellular enzyme were the effective biomasses for the biodegradation of TPhT. At initial concentration of 3 mg x L(-1), 10.9%, 5.3% and 47.9% of TPhT could be degraded by these biomasses respectively at 30 degrees C within 2 hours under an rotary shaker at 120 r x min(-1). The experimental results also showed that the enzyme activity could be affected by the buffers, pH, temperature, metals and the concentration of TPhT. The degradation efficiency would reach the highest point at pH 8, and at the optimal temperature of 50 degrees C. Metals including Mg2+, Mn2+, Fe2+ and Fe3+ improved the enzyme activity at certain concentrations. In the presence of 15 mg x L(-1) of Mg2+, the removal percentage of TPhT was up to 73.8%. It suggested that the metals activated the enzyme and interacted with the TPhT enabling its removal during the biodegradation process. Linear plots of removal ratios versus concentrations of TPhT meant that the biodegradation fitted the Michaelis-Menten model. The Vmax and Km of this biodegradation were 0. 15 mg x (L x min)(-1) and 47.1 mg x L(-1), respectively.

[Determination of organotin compounds in water soluble paints and adhesives by GC-MS].

The use of tributyltin (TBT) and triphenyltin (TPT) in some household products are prohibited by "Act on the Control of Household Products Containing Harmful Substances" in Japan. In this study, methods for determination of TBT and TPT in water soluble paints and adhesives were developed by GC-MS. These compounds in paints and adhesives, which were mainly composed of vinyl acetate, urethane and acryl resins, and chloroprene rubber, were firstly extracted with HCl-acetone, and then extracted with hexane. On the other hand, the adhesive composed of natural rubber was firstly dispersed in water before acidification. The organotins were extracted with hexane from this solution and then these compounds were extracted with acetonitrile from hexane extract. These extracts were purified by a florisil cartridge column after ethyl-derivation with sodium tetraethylborate, and analyzed by GC-MS. The quantifications using deuterated compound of both organotins as surrogate standard were conducted, and good results were obtained. The recoveries were 81 to 118% and the coefficients of variation were 0.83 to 4.3% (TBT and TPT added; 5 microg/g). The method quantification limits were 0.0090 to 0.025 microg/g, which were lower than those of an official method. These methods were applied to monobutyltin (MBT), dibutyltin (DBT), monophenyltin (MPT), and diphenyltin (DPT). DBT and DPT in paints and adhesives were quantified, except for DPT in natural rubber. These methods were applied to commercial products. DBT was detected at low concentrations (t.r.-0.19 microg/g) in some paint samples, while TBT and TPT were not detected in all samples.

Development of the extraction method for the simultaneous determination of butyl-, phenyl- and octyltin compounds in sewage sludge.

The toxicity and bioaccumulation of organotin compounds (OTCs) led to the development of sensitive and selective analytical methods for their determination. In the past much attention was assigned to the study of OTCs in biological samples, water and sediments, coming mostly from marine environment. Little information about OTCs pollution of terrestrial ecosystems is available. In order to optimise the extraction method for simultaneous determination of butyl-, phenyl- and octyltin compounds in sewage sludge five different extractants (tetramethylammonium hydroxide, HCl in methanol, glacial acetic acid, mixture of acetic acid and methanol (3:1), and mixture of acetic acid, methanol and water (1:1:1)), the presence or not of a complexing agent (tropolone), and the use of different modes of extraction (mechanical stirring, microwave and ultrasonic assisted extraction) were tested. Extracted OTCs were derivatised with sodium tetraethylborate and determined by gas chromatography coupled with mass spectrometer. Quantitative extraction of butyl-, phenyl- and octyltin compounds was obtained by the use of glacial acetic acid as extractant and mechanical stirring for 16h or sonication for 30 min. The limits of detection and quantification for OTCs investigated in sewage sludge were in the ng S ng(-1) range.

Pressurized liquid extraction followed by gas chromatography with atomic emission detection for the determination of fenbutatin oxide in soil samples.

A novel method for the determination of the miticide bis[tris(2-methyl-2-phenylpropyl)tin] oxide, also known as fenbutatin oxide (FBTO), in agricultural soils is presented. Pressurized liquid extraction (PLE) followed by analyte derivatization and extraction into isooctane was the used sample preparation approach. Selective determination was achieved by gas chromatography with atomic emission detection (GC-AED). Influence of different parameters on the performance of the extraction process is thoroughly discussed; moreover, some relevant aspects related to derivatization, determination and quantification steps are also presented. As regards PLE, the type of solvent and the temperature were the most relevant variables. Under optimized conditions, acetone, without any acidic modifier, was employed as extractant at 80 degrees C. Cells were pressurized at 1500 psi, and 2 static cycles of 1 min each were applied. Acetone extracts (ca. 25 mL) were concentrated to 1 mL, derivatized with sodium tetraethyl borate (NaBEt(4)) and the FBTO derivative, resulting from cleavage of the Sn-O-Sn bond followed by ethylation of the hydroxyl fragments, extracted into isooctane and determined by GC-AED. Under final working conditions, the proposed method provided recoveries from 76 to 99% for spiked soil samples, a limit of quantification of 2 ng g(-1) and an acceptable precision. Analysis of samples from vineyards sprayed with FBTO, confirmed the persistence of the miticide in soil for more than 1 year after being applied.

Isolation of Streptomyces sp. strain capable of butyltin compounds degradation with high efficiency.

Dibutyltin (DBT), a widely used plastic stabilizer, has been detected in the environment as well as in human tissues. DBT is considered to be highly neurotoxic and immunotoxic. Hence, DBT needs to be considered as a potential toxic chemical. Degradation of butyltin compounds by Streptomyces sp. isolated from plant waste composting heaps was studied. Glucose grown cells degraded organotin from 10 to 40 mg l(-1). After 1 day of incubation 90% of DBT (added at 20 mg l(-1)) was converted to less toxic derivative--monobutyltin (MBT). DBT metabolism was inhibited by metyrapone addition, a known cytochrome P-450 inhibitor. It could provide evidence that cytochrome P-450 system is involved in DBT metabolism in Streptomyces sp. IM P102. Moreover, according to our knowledge, the degradation of DBT by actinobacterium has not been previously described.

Simultaneous speciation of methylmercury and butyltin species in environmental samples by headspace-stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry.

In this work, making use of experimental designs, headspace-stir bar sorptive extraction (HS-SBSE) followed by thermal desorption (TD) coupled to a gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of mercury and tin organometallic compounds present in surface water, sediment and biological tissue was optimized. All solid samples require a previous extraction typically done with diluted HCl or KOH/methanol solutions, and the derivatization, in all the cases, of the organometallic compounds with NaBEt(4). As a consequence, the preconcentration step was carried out in a 0.1 mol L(-1) HOAc/NaOAc buffer solution, with 0.1% (m/v) of NaBEt(4), without the addition of NaCl as a salting out reagent, and with the stir bar (20 mm x 1 mm) located in the headspace (HS). In addition, the desorption step required the following conditions: 250 degrees C (desorption temperature), 15 min (desorption time), 14.1 psi (approximately 97.2 kPa) (vent pressure) and 75 mL min(-1) (vent flow). Finally, to assure the extraction of all the analytes under equilibrium, 5h are required. Inorganic mercury (Hg(2+)) and tripropyltin (TPrT) were used as internal standards to correct for variations in the extraction, derivatization and detection steps. The resulting method provides precise (4-17%) and accurate (against four certified reference materials) results in the ng L(-1) and pg g(-1) range concentrations with recoveries within 80-120% for water samples. The proposed methodology is currently applied in the speciation analysis of specimens obtained in different estuarine sites of the Basque Coast.

Removal of organotin compounds, Cu and Zn from shipyard wastewaters by adsorption--flocculation: a technical and economical analysis.

Several commercially available adsorbents were screened for their ability to remove Cu, Zn and organotin compounds from both artificial contaminated and real dockyard wastewater. An adsorption--flocculation process using a mixture of two adsorbents (a clay based adsorbent and a powdered activated carbon) was optimized for an optimal adsorbent and pollutant removal. At the optimal conditions the process was evaluated with both artificial and real shipyard wastewater, and the cost of the adsorption-flocculation process with relation to different influent concentrations and discharge limits was estimated.