Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study.

OBJECTIVE: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. METHODS: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. RESULTS: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. CONCLUSIONS: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

Quantitative evaluation of vertical control in orthodontic camouflage treatment for skeletal class II with hyperdivergent facial type.

BACKGROUND: In this study, we sought to quantify the influence of vertical control assisted by a temporary anchorage device (TAD) on orthodontic treatment efficacy for skeletal class II patients with a hyperdivergent facial type and probe into the critical factors of profile improvement. METHODS: A total of 36 adult patients with skeletal class II and a hyperdivergent facial type were included in this retrospective case-control study. To exclude the effect of sagittal anchorage reinforcement, the patients were divided into two groups: a maxillary maximum anchorage (MMA) group (N = 17), in which TADs were only used to help with anterior tooth retraction, and the MMA with vertical control (MMA + VC) group (N = 19), for which TADs were also used to intrude the maxillary molars and incisors. The treatment outcome was evaluated using dental, skeletal, and soft-tissue-related parameters via a cephalometric analysis and cast superimposition. RESULTS: A significant decrease in ANB (P < 0.05 for both groups), the retraction and uprighting of the maxillary and mandibular incisors, and the retraction of protruded upper and lower lips were observed in both groups. Moreover, a significant intrusion of the maxillary molars was observed via the cephalometric analysis (- 1.56 ± 1.52 mm, P < 0.05) and cast superimposition (- 2.25 ± 1.03 mm, P < 0.05) of the MMA + VC group but not the MMA group, which resulted in a remarkable decrease in the mandibular plane angle (- 1.82 ± 1.38°, P < 0.05). The Z angle (15.25 ± 5.30°, P < 0.05) and Chin thickness (- 0.97 ± 0.45°, P < 0.05) also improved dramatically in the MMA + VC group, indicating a better profile and a relaxed mentalis. Multivariate regression showed that the improvement in the soft tissue was closely related to the counterclockwise rotation of the mandible plane (P < 0.05). CONCLUSIONS: TAD-assisted vertical control can achieve intrusion of approximately 2 mm for the upper first molars and induce mandibular counterclockwise rotation of approximately 1.8°. Moreover, it is especially important for patients without sufficient retraction of the upper incisors or a satisfactory chin shape.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

[The use of fixed expanders with orthodontic miniscrews support in children with mesial occlusion]. / Ispol'zovanie nes"emnykh rasshiritelei s vnutrikostnoi oporoi u detei s mezial'noi okklyuziei.

OBJECTIVE: Prevention of the development of pronounced skeletal abnormalities in patients with mesial occlusion. MATERIALS AND METHODS: Biometric analysis of control and diagnostic models of dentition was performed in 60 patients with dental anomalies before and after treatment in 3 mutually perpendicular planes to identify violations in the formation of dental arches by sagittal and transversal dimensions, and alveolar processes - by vertical dimensions (methods of A. Pont, G. Korkhaus). Measurements of 23 parameters of TRG and sections of CBCT were carried out using the modified Nad-Ars technique with analysis of skeletal parameters before and after treatment. Treatment was carried out using dilators for the upper jaw in combination with a facial mask and further dynamic observation using active retention devices. RESULTS: The results of treatment showed an increase in the length of the anterior segment of the upper dental arch by 2.8±0.55 mm (p<0.05 mm); expansion in the area of temporary molars by 2.85±0.65 mm (p<0.05); in the area of permanent molars by 2.75±0.55 mm (p<0.05); in the area of the apical basis of HF by 3.82±0.45 mm (p<0.05). The length of the lower dental arch in the anterior segment has not changed. Analysis of TRG parameters showed a significant increase in the values of

Craniomandibular transverse tomographic evaluation after anterior open bite orthodontic treatment with miniplates anchorage.

BACKGROUND: Skeletal anterior open bite (SAOB) represents one of the most complex and challenging malocclusions in orthodontics. Orthodontic treatment supported by miniplates enable to reduce the need for orthognathic surgery. Transverse dimension may be affected by intrusion biomechanics. This study aims to assess transverse bone alterations in patients with SAOB who underwent orthodontic treatment with absolute anchorage using four miniplates. METHODS: A total of 32 patients of both sexes, with an average age of 33.8 years, diagnosed with SAOB and treated orthodontically with four miniplates (one in each hemiarch), were selected for this study. Tomographic examinations were performed before (T1) and after (T2) orthodontic treatment. Linear measurements (width of the maxillary base, maxillary alveolar, maxillary root, maxillary dental cusp, mandibular alveolar) and angular measurements (maxillary intermolar angle) were assessed in these images. The Shapiro-Wilks normality tests were applied to verify data distribution, and the paired t-test was used to compare the initial and final measures obtained. RESULTS: Among the evaluated parameters, the maxillary alveolar width, maxillary dental cusp width, mandibular alveolar cusp width, and intermolar angle showed statistically significant differences between T1 and T2 (p < 0.05). However, maxillary base and maxillary root widths showed no significant difference (p > 0.05). CONCLUSIONS: Intrusion and distalization with miniplates in SAOB therapy may lead to significant expansive changes, due to molars cusps width and buccal inclination increase restricted at the alveolar level.

Quality of occlusal outcome in adult class II patients after maxillary total arch distalization with interradicular mini-screws.

BACKGROUND: The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA). METHODS: Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws. CONCLUSIONS: CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.

Site selection of micro-implant anchorages in the infrazygomatic crest in adult orthodontic patients.

OBJECTIVES: To determine the optimal placement of miniscrews, this study compared adult male and female patients in terms of cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest region. METHODS: The cone beam computed tomography imaging data of 200 patients (20-30 years old; 100 males and 100 females) were collected. The right maxillary posterior teeth in the sagittal plane were divided into six levels from proximal to distal, and three measurement sites were positioned at vertical distances of 8, 10, and 12 mm from the cementum. Cortical bone density, cortical bone thickness, and available bone width were measured in 18 measurement sites in the infrazygomatic crest and analyzed statistically. RESULTS: The highest cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest in adult male and female patients were at the level of the interradicular space between the maxillary second premolar and maxillary first molar. The bone cortical density and thickness increased with vertical height, whereas the available bone width decreased with increasing vertical height. Differences were observed in cortical bone density, cortical bone thickness, and available bone width between adult male and female patients. CONCLUSIONS: The optimal implantation sites of the micro-implant anchorages in the infrazygomatic crest were at the level of the interradicular space between the maxillary second premolar and the maxillary first molar, and the vertical height of the optimal implantation site in males was appropriately higher than that in females.

Biomechanical analysis of total arch maxillary distalization using infrazygomatic crest miniscrews: a finite element analysis study.

AIM: To evaluate the maxillary incisors and canine's immediate movement tendency using three different power arms (PA) height levels during total arch maxillary distalization supported on infrazygomatic crest (IZC) miniscrews according to finite element analysis (FEA). METHODS: Three finite element models of the maxilla were developed based on CBCT imaging of a teenage male patient presenting a Class II Division 1 malocclusion in the early permanent dentition. Maxillary complex, periodontium, orthodontic accessories, IZC miniscrews and an orthodontic wire were digitally created. The PAs were placed between canines and lateral incisors and projected at 4, 7, and 10 mm height distances. After that, distalization forces were simulated between PA and IZC miniscrews. RESULTS: The anterior teeth deformation produced in the FEA models was assessed according to a Von Mises equivalent. The stress was measured, revealing tendencies of initial maxillary teeth movement. No differences were found between the right and left sides. However, there was a significant difference among models in the under-stress areas, especially the apical and cervical root areas of the maxillary anterior teeth. More significant extrusion and lingual tipping of incisors were observed with the 4 mm power arm compared to the 7 mm and 10 mm ones. The 10 mm power arm did not show any tendency for extrusion of maxillary central incisors but a tendency for buccal tipping and intrusion of lateral incisors. CONCLUSION: The maxillary incisors and canines have different immediate movement tendencies according to the height of the anterior point of the en-masse distalization force application. Based on the PA height increase, a change from lingual to buccal tipping and less extrusion tendency was observed for the incisors, while the lingual tipping and extrusion trend for canines increased.

Is significant mandibular advancement possible after the peak of puberty? Dento-osseous palatal expansion and the STM4 technique (Skeletal Therapy Manni Telescopic Herbst 4 miniscrews): A case report.

INTRODUCTION: Treatment of skeletal class II growing patients often requires the use of functional appliances, aimed at promoting mandibular advancement. Among these, Herbst appliance is recommended for its effectiveness, efficiency, and reduced need for compliance. Despite its skeletal favourable effects, well-known dental compensations can occur, especially when the appliance is not used close to the pubertal peak: upper incisors retroclination, lower incisors proclination, upper molars distalization and lower molars mesialization could reduce the overjet needed for a proper mandibular advancement. To counteract these unfavourable effects skeletal anchorage could be crucial. AIM: The aim of this case report is to describe and evaluate the effects of using a skeletally anchored Herbst appliance in an 18-year-old (CVM5) male patient with skeletal Class II malocclusion and a convex profile. TREATMENT PROTOCOL: The treatment started with a tooth-bone-borne palatal expansion, then the upper arch was bonded with pre-adjusted ceramic brackets. After 2months, a Manni Telescopic Herbst (MTH) supported by 4 miniscrews (two in the maxilla and two in the mandible) was applied. To avoid anchorage loss, TADs were connected with elastic chains to the arches. Nine months later, the Herbst was removed, the lower teeth were bonded and the patient wore class 2 elastics to stabilise the occlusion. RESULTS AND CONCLUSIONS: After 24months the treatment goal was achieved with a considerable improvement of the profile and a clinically significant mandibular advancement (Pogonion moved forward 7mm). A one-year follow-up lateral X-rays showed a good stability of the result.

Non-compliance treatment in a young adult full-step class II division 2 malocclusion with preadjusted lingual appliance and upper first molars extractions.

This case report describes a complex full-step class II case in a young adult patient treated with lingual straight-wire appliance and upper first molar extraction. As the patient refused a surgical treatment, she was offered the best possible camouflage with the double aim of obtaining an ideal occlusal relationship and maintaining the profile; appropriate biomechanical strategies, including extraction choice and anchorage control during space closure, were needed to achieve the planned results. This case report demonstrates the possibility of successfully resolving severe sagittal discrepancies in an adult patient without surgical treatment by means of a completely invisible non-compliance technique, with the extraction of the most compromised teeth. This report also underlines the need for careful planning during both diagnostic and treatment phases, in order to obtain the best results.

Total arch extrusion with skeletal anchorage to improve inadequate maxillary incisor display in a case of vertical maxillary deficiency.

Inadequate maxillary incisor display can negatively impact facial esthetics. Various treatment options exist depending on the underlying cause and severity of the condition. Skeletal anchorage was used to extrude the maxillary dentition and rotate the mandible backward, enhancing visibility of the maxillary incisors. An extrusion assembly was introduced to achieve orthodontic extrusion. Use of bite raisers and interarch elastics was also discussed. Treatment results demonstrated successful achievement of the treatment goals. In addition to optimal occlusion, the patient's facial profile improved with increased lip fullness. There was an increase in vertical facial height, and maxillary incisor display was significantly improved, resulting in a more pleasant smile. Two-year postretention records evidenced the stability of total arch extrusion to improve maxillary incisor display.

Comparison of treatment effects during en-masse retraction of upper anterior teeth placed using mini-implants placed at infrazygomatic crest and interradicular sites: A randomized controlled trial.

INTRODUCTION: The objective of this prospective study was to examine the efficacy of posterior interradicular and infrazygomatic crest mini-implants for en-masse anterior retraction. METHODS: The 22 patients were divided into two groups. In group 1 (IZC n = 11), mini-implants were placed in the infrazygomatic crests and in group 2 (IR, n = 11), mini-implants were placed in the molar-premolar interradicular sites. Soft tissue, skeletal, and dental treatment effects between two groups were compared using lateral cephalometric measurements. RESULTS: The average angle between the cranial base and A point was 1.01 degrees (P = .004), and the linear distance between the upper incisor and A point was 2.67 to 5.2 millimetres (P = .00). In IZC group the maxillary incisor to the palatal plane moved upward by a mean of -5.20 mm (P = .059), whereas in IR group the incisor movement changed by -2.67 mm (P = .068). There was no significant difference between groups IZC and IR while comparing overall treatment changes on upper incisor position change, angle, and overjet. CONCLUSIONS: Mini-implants placed in between the molar and premolar as well as the infrazygomatic crest can withstand the deepening of the bite during retraction. Mini-implants in IZC are capable of causing intrusion of the anterior teeth and preventing intrusion of the molars, thereby providing absolute anchoring in all planes. Placement of the mini-implants in the infrazygomatic crest resulted in more linear retraction.

The success rate of mini-screws for incisors intrusion and patient age, gender, and insertion angle in the maxilla using CBCT and implant-guided surgery. A split-mouth, randomized control trail.

BACKGROUND AND OBJECTIVES: The intrusion of anterior teeth is a routine procedure in orthodontics, which has been performed efficiently with the help of mini-screws in the anterior region, especially the upper maxilla. This study aimed to investigate the effect of insertion angle and sociodemographic features on the success rate of mini-screws at the anterior maxillary region. MATERIALS AND METHODS: Twenty-nine patients (18 Females and 11 Males) aged 18-40 years old were involved in the current study. A split-mouth design was carried out in which recruited patients needed bilateral anterior screws at the labial bone in the region of the incisor for the intrusion of upper anterior incisor teeth as part of their orthodontic treatment with a fixed appliance (upper right side received 90-degree insertion angle mini-screw and 45° for left side) using a surgical guide fabricated from patients CBCT and intraoral scans. The mini-screws were inserted at the attached gingiva bilaterally to achieve intrusion of upper anterior teeth with a power chain ligated from the main archwire to the anterior min-implants. The patient was recalled monthly for orthodontic appliance activation and screw assessment for 6 months. The intrusion force was 15 g on each side. RESULTS: The results of the study showed that screw stability was higher in the male group than the female group at the 6th monthly follow-up visit with a statistically significant difference between both genders (P = .044). Concerning insertion angle, results showed a statistically significant difference between 45° and 90° as an insertion angle with a P-value <.01 in most of the follow-up months. CONCLUSION: This study found that male patients with mini-screws inserted at 90° showed greater screw stability over time.

Three-dimensional volumetric evaluation of root resorption in maxillary anteriors following en-masse retraction with varying force vectors - a randomized control trial.

BACKGROUND: Root resorption in orthodontics is associated with direction and magnitude of force application as primary etiological factors. Well-controlled trials that utilize three-dimensional segmentation to detect volumetric changes in tooth structure are required to assess the quantitative nature of root resorption. OBJECTIVE: To assess the severity of root resorption (RR) during retraction of maxillary anteriors with three different force vectors (with and without skeletal anchorage) via cone-beam computed tomography (CBCT) superimpositions. TRIAL DESIGN: Three-arm parallel randomized clinical trial (RCT). MATERIALS AND METHODS: Forty-two (16 males, 26 females) patients, (17-28 years), in permanent dentition with bimaxillary protrusion were randomly allocated to three groups of 14 patients each using block randomization (1:1:1 ratio) and allocation concealment. En-masse anterior retraction post first premolar extractions was carried out with modified force vectors in the three groups based on anchorage type [Molar, Mini-implant and Infrazygomatic crest (IZC) bone screws]. Volumetric root loss and linear dimensional changes were blindly assessed on initial (T0) and final (T1, end of space closure) CBCT scans. Normality distribution of values was done using Shapiro-Wilk's test. ANOVA and Post-hoc Tukey HSD test were done to compare measurements between groups at significance levels (P < .05). RESULTS: Forty patients were analysed (14, 14, and 12 in three groups). Significant volumetric loss was noted in all groups. Central incisors demonstrated a significant reduction in IZC group (81.5 ± 21.1 mm3 ) compared to conventional (50.1 ± 26.5 mm3 ) and mini-implant groups (76.1 ± 27.6 mm3 ). Canines demonstrated a significant reduction in mini-implant group (108.9 ± 33.9 mm3 ) compared to conventional (68.8 ± 42.5 mm3 ) and IZC groups (103.1 ± 29.1 mm3 ). Regarding linear parameters, central incisors and canines revealed significant root length reduction in both skeletal anchorage groups. Lateral incisors showed no significant changes between groups. CONCLUSIONS: Intrusive force vectors generated during skeletally anchored retraction can predispose anteriors to an increased risk of resorption. Greater loss of root volume was noted in the centrals and canines when retracted with skeletal anchorage. LIMITATIONS: Small sample size and variations during CBCT acquisition. HARMS: Low-dose CBCT scans were taken at T0 and T1 treatment intervals.

Evaluation of the effectiveness of the platelet-rich plasma compared to the injectable platelet-rich fibrin on the rate of maxillary canine retraction: a three-arm randomized controlled trial.

BACKGROUND: Blood-derived materials have been used recently to accelerate orthodontic tooth movement, but there are conflicting reports on their effectiveness. OBJECTIVE: To evaluate the potential effect of local injection of platelet-rich plasma (PRP) and injectable platelet-rich fibrin (i-PRF) on the rate of orthodontic tooth movement. TRIAL DESIGN: A single-center, three-arm, parallel-group randomized controlled trial. MATERIALS AND METHODS: The sample consisted of 60 patients aged between 18 and 25 years (mean age: 21.1 ±â€…2.2 years) with Class II division 1 malocclusion requiring anterior retraction. Using a computer-generated list of random numbers, patients were assigned to three groups of canine retraction: (i) assisted with PRP injection (PRP group), (ii) assisted with i-PRF group, and (iii) conventional treatment with no injections (Cont. group). In the interventional groups, injections were done immediately and at 8 weeks after the onset of canine. Transpalatal arches (TPAs) were used to reinforce anchorage. The upper canines were distalized on 0.019 × 0.025-inch stainless archwires using coil springs with a force of 150 g. The primary outcome was the amount of canine retraction, whereas the secondary outcomes were canine rotation and anchoring loss. Assessment was done at five-time points: the beginning of tooth movement (T0) and at 4, 8, 12, and 16 weeks following T0 on three-dimensional superimposed digital models. RESULTS: Sixty patients were randomized and included in this study (20 patients in each group), there were no dropouts. The rate of canine retraction was faster in the experimental groups. The PRP group showed a significantly slower movement in the second and fourth months than the i-PRF group while in the first and third months, there were nonsignificant differences between the two experimental groups. LIMITATIONS: Blinding was not possible during the clinical stage of this trial. CONCLUSIONS: PRP and i-PRF were found to be effective in accelerating orthodontic tooth movement during canine retraction. However, the effect of i-PRF was longer than that of PRP. TRIAL REGISTRATION: ClinicalTrials.gov (ID: NCT05335824).

Patients' perception of orthodontic mini implants at different sites: anterior vs posterior maxilla.

The aim of this study was to compare patients' overall perception of treatment with orthodontic mini implants placed in the maxillary anterior or posterior region. Twenty young adult patients were divided into 2 groups (n = 10). In group 1 (G1), mini implants were placed in the maxillary anterior midline just below the labial frenum. In group 2 (G2), mini implants were placed bilaterally in the maxillary posterior region, between the maxillary second premolar and first molar at the mucogingival junction. Questionnaires were used to record patient experiences with the mini implants at 3 time points: immediately after placement, 1 week after placement, and immediately after removal. Patients were offered 3 choices representing different levels of intensity. The patients were also asked to record their responses on a scale of 0 to 10 for each parameter evaluated. Each unit was subdivided into units of 10. A score of 0 indicated the best response and 10 indicated the worst response. Statistical analyses included the Student t and chi-square tests. Patients in G2 reported greater discomfort during mini implant placement than did patients in G1 (P = 0.036). During the following week, some patients experienced a bad taste at the site, rated significantly worse in G2 than in G1 (P = 0.043). There was also a statistically significant difference between the 2 groups (P = 0.032) in response to a question about the overall experience of the procedure, with G2 rating it better than G1; in the anterior region, the patients had a mean score of 2.00 (SD, 1.29; 95% CI, 0.22 to 3.78); and in the posterior region, they had a mean score of 0.00 (SD, 0.00; 95% CI, 0.81 to 3.19). There were no statistically significant differences in the distributions of responses for any measured outcome between G1 and G2. At mini implant removal, a greater number of patients in G2 than in G1 found the entire procedure to be somewhat different (unfamiliar) compared with other routine orthodontic procedures (P = 0.004). Despite the scores for the question on overall experience, the responses to questions about individual aspects of treatment indicated that patients with mini implants placed in the anterior region had a better experience than did patients with mini implants placed in the posterior region.

Clear aligner treatment assisted by mini screw for an adult with Class II division 2 malocclusion and a right upper canine completely outside of the dental arch: A case report.

This case report describes a 19-year-old man presented with a 5.7-mm deep overbite, Class II division 2 malocclusion with the right upper maxillary canine completely buccal ectopia, deviated midline in the upper arch, severe crowding and retroclination of the maxillary and mandibular incisors. The patient was treated with clear aligners to correct the Class II relationship and the deep overbite. A series of clear aligners were used to move bilateral maxillary molars distally with unilateral mini-screw anchorage. The final results showed that clear aligners with mini-screws could effectively achieve the required upper distal molar movement thanks to a reasonable design of the stages and anchorage. The treatment was completed in 19 months and the patient was satisfied with the treatment outcome in this context of mild to moderate Class II division 2 malocclusion.

Vertical changes in the hard tissues after space closure by miniscrew sliding mechanics: a three-dimensional modality analysis.

OBJECTIVES: This study aimed to investigate vertical changes in the maxillary central incisor and the maxillary first molar, along with alterations in the mandibular plane angle during space closure using miniscrew sliding mechanics. METHODS: Twenty adult patients treated at Peking University Hospital of Stomatology between 2008 and 2013 were included. Digital dental models and craniofacial cone-beam computed tomography (CBCT) scans were obtained at the start of treatment (T0) and immediately after space closure (T1). Stable miniscrews were used for superimposing maxillary digital dental models (T0 and T1), and vertical changes in the maxillary first molar and the maxillary central incisor were measured. Three-dimensional changes in the mandibular plane were assessed through CBCT superimposition. RESULTS: The maxillary central incisor exhibited an average extrusion of 2.56 ± 0.18 mm, while the maxillary first molar showed an average intrusion of 1.25 ± 1.11 mm with a distal movement of 0.97 ± 0.99 mm. Additionally, the mandibular plane angle decreased by an average of 0.83 ± 1.65°. All three indices exhibited statistically significant differences. CONCLUSION: During space closure using the miniscrew sliding technique, significant changes occurred in both the sagittal and vertical dimensions of the upper dentition. This included extrusion of the maxillary central incisors, intrusion of the maxillary first molars, and a slight counterclockwise rotation of the mandibular plane.

Evaluation of orthodontic habits regarding the use of miniplates in the correction of Skeletal Class III.

AIMS: To determine the habits of Orthodontists in the management of moderate skeletal class III patients by using miniplates, and to assess the relationship between the factors that may hinder the implementation of such treatment. MATERIAL AND METHODS: A questionnaire was carried out using the Google Form® platform, which included 18 questions relating to the seniority of the practice of the orthodontists, the preferential treatment, the difficulties encountered, the results obtained, and the frequency of a relapse. RESULTS: Experienced orthodontists (more than 10 years) treated skeletal class III malocclusion with the conventional facemask therapy, whereas orthodontists with less than 5 years of experience shifted to the miniplate technique which presented less dental effect and more skeletal correction with a decreased frequency of relapse. CONCLUSION: High financial cost and increased care load were considered the main obstacles regarding the placement of the titanium miniplates in treating skeletal class III patients.