A novel acrylic orthodontic device for treatment of linguoverted mandibular canine teeth in small dogs.

Linguoverted mandibular canine teeth (LMC) is a common malocclusion in dogs. Several inclined bite-plane techniques using acrylic resin have been introduced to correct LMC in dogs. Although these techniques have suggested modifications to overcome shortcomings, there are still limitations; e.g., high technical sensitivity, as the viscous acrylic resin must still be fabricated in the oral cavity. The authors developed a novel method for small-breed dogs that uses a doughy acrylic resin form to achieve an easy intraoral design and extraoral fabrication. Eight small-breed dogs were presented to evaluate and treat malocclusion causing palatal trauma. First, a Class-1 malocclusion with linguoversion of the mandibular canine teeth (6 dogs with unilateral LMC and 2 dogs with bilateral) was diagnosed based on oral examination. Dogs were treated with the new method using a doughy acrylic resin form for 6 to 7 wk and had posttreatment follow-up 1 y after the procedure. All treated canine teeth were in correct positions 1 y after the appliances were removed. Key clinical message: The authors believe that the new method using a doughy acrylic resin form could be a good alternative for veterinarians to use when treating LMC.

Un nouveau dispositif orthodontique en acrylique pour le traitement des canines mandibulaires linguoverties chez les petits chiens. Les canines mandibulaires linguoverties (LMC) sont une malocclusion courante chez le chien. Plusieurs techniques de plan de morsure incliné utilisant de la résine acrylique ont été introduites pour corriger la LMC chez le chien. Bien que ces techniques aient suggéré des modifications pour surmonter les lacunes, elles présentent encore des limites; par exemple, une sensibilité technique élevée, car la résine acrylique visqueuse doit encore être fabriquée dans la cavité buccale. Les auteurs ont développé une nouvelle méthode pour les chiens de petite race qui utilise une forme pâteuse de résine acrylique pour obtenir une conception intra-orale et une fabrication extra-orale faciles. Huit chiens de petite race ont été présentés pour évaluer et traiter une malocclusion provoquant un traumatisme palatin. Tout d'abord, une malocclusion de classe 1 avec linguoversion des canines mandibulaires (6 chiens avec LMC unilatérale et 2 chiens avec bilatérale) a été diagnostiquée sur la base d'un examen oral. Les chiens ont été traités avec la nouvelle méthode en utilisant une forme pâteuse de résine acrylique pendant 6 à 7 semaines et ont fait l'objet d'un suivi post-traitement 1 an après la procédure. Toutes les canines traitées étaient dans la bonne position un an après le retrait des appareils.Message clinique clé:Les auteurs estiment que la nouvelle méthode utilisant une forme pâteuse de résine acrylique pourrait être une bonne alternative que les vétérinaires pourraient utiliser lors du traitement du LMC.(Traduit par Dr Serge Messier).

Digital setup accuracy for moderate crowding correction with fixed orthodontic appliances: a prospective study.

OBJECTIVES: To evaluate the accuracy of a semi-automatic 3D digital setup process in predicting the orthodontic treatment outcome achieved by labial fixed appliances. SUBJECTS AND METHODS: Twenty-five adult patients (18 to 24 years old) with class I malocclusion and moderate crowding were prospectively enrolled and received treatment on both jaws through the straight-wire technique. Prior to treatment commencement, a semi-automatic digital setup simulating the predicted treatment outcome was performed for each patient through Orthoanalyzer software (3Shape®, Copenhagen, Denmark) to obtain the prediction model. This was compared to the final outcome model through 3D superimposition methods. Metric variables and inspection of color-coded distance maps were used to detect how accurately the digital setup predicts the actual treatment outcome. RESULTS: The mean absolute distances (MAD) between the superimposed dental arches of the predicted and the final models were: 0.77 ± 0.13 mm following superimposition on the palate, 0.52 ± 0.06 mm following superimposition on the maxillary dental arch, and 0.55 ± 0.15 mm following superimposition on the mandibular dental arch. The MAD at the palatal reference area was 0.09 ± 0.04 mm. Visualization of color-coded distance maps indicated that the digital setup accurately predicted the final teeth position in a few cases. Almost half of the cases had posteriorly wider upper and lower dental arches and palatally/lingually positioned or inclined anterior teeth, whereas the rest still showed errors within 2-3 mm, distributed over the entire dental arches with no distinct pattern. CONCLUSIONS: The accuracy of semi-automatic prediction of the labial fixed appliance treatment outcome in Class I cases with moderate crowding is not yet sufficient. While average measures showed deviations less than 1 mm, examination of individual color-coded distance maps revealed significant disparities between the simulated and the actual results.

Percentage of patients shifting to another treatment modality: An experience-guided decision.

OBJECTIVE: This study aimed to assess the frequency with which orthodontic patients decided to shift to another type of orthodontic appliance, among conventional metal brackets, ceramic brackets, lingual brackets and clear aligner, based on their personal experiences of pain, ulcers, bad breath, hygiene issues and social difficulties. MATERIAL AND METHODS: This study comprises of patients seeking orthodontic treatment. The sample (n = 500; age group = 19-25 years) was divided equally into four groups based on the treatment modality: conventional metal brackets, ceramic brackets, lingual brackets and clear aligner. Patients rated the questionnaire using a visual analogue scale, to assess variables (such as pain, ulcer etc) that impact various treatment modalities. Subsequently, patients from all groups provided feedback regarding their treatment experiences, and expressed their preference for an alternative modality. Intergroup comparison among the four groups was done using one-way analysis of variance with Tukey's HSD post-hoc test (p ≤ 0.05). RESULTS: Patients who received lingual brackets reported higher levels of pain and ulceration, as compared to those who received clear aligners. All four groups showed statistically significant differences for ulcers during treatment (p ≤ 0.05). Of the 125 patients who received conventional metal brackets, 28% expressed a preference for clear aligner therapy, while 20% preferred ceramic brackets. In the lingual group, 56% of 125 patients preferred clear aligner therapy, and 8% preferred ceramic brackets to complete their treatment. In the ceramic group, 83% did not want to switch, whereas 17% desired to switch to clear aligner, while in aligner group no patient desired to switch. CONCLUSIONS: A higher percentage of patients from lingual brackets group chose to shift to clear aligners, followed by conventional metal brackets group and by ceramic brackets group, in this descending order. The clear aligner group demonstrated fewer issues than the other treatment modalities.

Assessment of the quality and accuracy of information contained within the websites of marketed orthodontic products: a cross-sectional investigation.

OBJECTIVES: To assess the quality and accuracy of information contained within the websites of providers of marketed orthodontic products. MATERIALS AND METHODS: Twenty-one websites of orthodontic appliance and adjunct (product) providers were identified. The website content was assessed via two validated quality-of-information instruments (DISCERN and the Journal of the American Medical Association [JAMA] benchmarks) and an accuracy-of-information instrument. Website content was qualitatively analyzed for themes and subthemes. RESULTS: More than half (n = 11; 52.3%) of the assessed websites contained clinician testimonials. The mean (SD) DISCERN score was 33.14 (5.44). No website recorded the minimum of three JAMA benchmarks required to indicate reliability. The most common content themes related to quality-of-life impact and treatment duration. Just 8% of the statements within the websites were objectively true. The Pearson correlation coefficient indicated that the DISCERN scores were correlated with the accuracy-of-information scores (r = .83; P < .001). CONCLUSIONS: The quality and accuracy of information contained within the websites of the providers of marketed orthodontic products was poor. The combined use of DISCERN and the accuracy-of-information instrument may help overcome the shortcomings of each. Clinicians should check the accuracy of information on orthodontic product provider websites before adding links to those websites on their own sites.

Validation of a double-semicircular notched configuration for mechanical testing of orthodontic thermoplastic aligner materials.

The potential of using specimens with a double-semicircular-notched configuration for performing tensile tests of orthodontic thermoplastic aligner materials was explored. Unnotched and double-semicircular-notched specimens were loaded in tension using a universal testing machine to determine their tensile strength, while finite element analysis (FEA) and digital image correlation (DIC) were used to estimate stress and strain, respectively. The shape did affect the tensile strength, demonstrating the importance of unifying the form of the specimen. During the elastic phase under tension, double-semicircular-notched specimens showed similar behavior to unnotched specimens. However, great variance was observed in the strain patterns of the unnotched specimens, which exhibited greater chance of end-failure, while the strain patterns of the double-semicircular-notched specimens showed uniformity. Considerable agreement between the theoretical (FEA) and practical models (DIC) further confirmed the validity of the double-semicircular-notched models.

Orthodontic treatment for prominent lower front teeth (Class III malocclusion) in children.

BACKGROUND: Prominent lower front teeth (Class III malocclusion) may be due to jaw or tooth position or both. The upper jaw (maxilla) can be too far back or the lower jaw (mandible) too far forward; the upper front teeth (incisors) may be tipped back or the lower front teeth tipped forwards. Orthodontic treatment uses different types of braces (appliances) fitted inside or outside the mouth (or both) and fixed to the teeth. A facemask is the most commonly reported non-surgical intervention used to correct Class III malocclusion. The facemask rests on the forehead and chin, and is connected to the upper teeth via an expansion appliance (known as 'rapid maxillary expansion' (RME)). Using elastic bands placed by the wearer, a force is applied to the top teeth and jaw to pull them forwards and downward. Some orthodontic interventions involve a surgical component; these go through the gum into the bone (e.g. miniplates). In severe cases, or if orthodontic treatment is unsuccessful, people may need jaw (orthognathic) surgery as adults. This review updates one published in 2013. OBJECTIVES: To assess the effects of orthodontic treatment for prominent lower front teeth in children and adolescents. SEARCH METHODS: An information specialist searched four bibliographic databases and two trial registries up to 16 January 2023. Review authors screened reference lists. SELECTION CRITERIA: We looked for randomised controlled trials (RCTs) involving children and adolescents (16 years of age or under) randomised to receive orthodontic treatment to correct prominent lower front teeth (Class III malocclusion), or no (or delayed) treatment. DATA COLLECTION AND ANALYSIS: We used standard methodological procedures expected by Cochrane. Our primary outcome was overjet (i.e. prominence of the lower front teeth); our secondary outcomes included ANB (A point, nasion, B point) angle (which measures the relative position of the maxilla to the mandible). MAIN RESULTS: We identified 29 RCTs that randomised 1169 children (1102 analysed). The children were five to 13 years old at the start of treatment. Most studies measured outcomes directly after treatment; only one study provided long-term follow-up. All studies were at high risk of bias as participant and personnel blinding was not possible. Non-surgical orthodontic treatment versus untreated control We found moderate-certainty evidence that non-surgical orthodontic treatments provided a substantial improvement in overjet (mean difference (MD) 5.03 mm, 95% confidence interval (CI) 3.81 to 6.25; 4 studies, 184 participants) and ANB (MD 3.05°, 95% CI 2.40 to 3.71; 8 studies, 345 participants), compared to an untreated control group, when measured immediately after treatment. There was high heterogeneity in the analyses, but the effects were consistently in favour of the orthodontic treatment groups rather than the untreated control groups (studies tested facemask (with or without RME), chin cup, orthodontic removable traction appliance, tandem traction bow appliance, reverse Twin Block with lip pads and RME, Reverse Forsus and mandibular headgear). Longer-term outcomes were measured in only one study, which evaluated facemask. It presented low-certainty evidence that improvements in overjet and ANB were smaller at 3-year follow-up than just after treatment (overjet MD 2.5 mm, 95% CI 1.21 to 3.79; ANB MD 1.4°, 95% CI 0.43 to 2.37; 63 participants), and were not found at 6-year follow-up (overjet MD 1.30 mm, 95% CI -0.16 to 2.76; ANB MD 0.7°, 95% CI -0.74 to 2.14; 65 participants). In the same study, at the 6-year follow-up, clinicians made an assessment of whether surgical correction of participants' jaw position was likely to be needed in the future. A perceived need for surgical correction was observed more often in participants who had not received facemask treatment (odds ratio (OR) 3.34, 95% CI 1.21 to 9.24; 65 participants; low-certainty evidence). Surgical orthodontic treatment versus untreated control One study of 30 participants evaluated surgical miniplates, with facemask or Class III elastics, against no treatment, and found a substantial improvement in overjet (MD 7.96 mm, 95% CI 6.99 to 8.40) and ANB (MD 5.20°, 95% CI 4.48 to 5.92; 30 participants). However, the evidence was of low certainty, and there was no follow-up beyond the end of treatment. Facemask versus another non-surgical orthodontic treatment Eight studies compared facemask or modified facemask (with or without RME) to another non-surgical orthodontic treatment. Meta-analysis did not suggest that other treatments were superior; however, there was high heterogeneity, with mixed, uncertain findings (very low-certainty evidence). Facemask versus surgically-anchored appliance There may be no advantage of adding surgical anchorage to facemasks for ANB (MD -0.35, 95% CI -0.78 to 0.07; 4 studies, 143 participants; low-certainty evidence). The evidence for overjet was of very low certainty (MD -0.40 mm, 95% CI -1.30 to 0.50; 1 study, 43 participants). Facemask variations Adding RME to facemask treatment may have no additional benefit for ANB (MD -0.15°, 95% CI -0.94 to 0.64; 2 studies, 60 participants; low-certainty evidence). The evidence for overjet was of low certainty (MD 1.86 mm, 95% CI 0.39 to 3.33; 1 study, 31 participants). There may be no benefit in terms of effect on ANB of alternating rapid maxillary expansion and constriction compared to using expansion alone (MD -0.46°, 95% CI -1.03 to 0.10; 4 studies, 131 participants; low-certainty evidence). AUTHORS' CONCLUSIONS: Moderate-certainty evidence showed that non-surgical orthodontic treatments (which included facemask, reverse Twin Block, orthodontic removable traction appliance, chin cup, tandem traction bow appliance and mandibular headgear) improved the bite and jaw relationship immediately post-treatment. Low-certainty evidence showed surgical orthodontic treatments were also effective. One study measured longer-term outcomes and found that the benefit from facemask was reduced three years after treatment, and appeared to be lost by six years. However, participants receiving facemask treatment were judged by clinicians to be less likely to need jaw surgery in adulthood. We have low confidence in these findings and more studies are required to reach reliable conclusions. Orthodontic treatment for Class III malocclusion can be invasive, expensive and time-consuming, so future trials should include measurement of adverse effects and patient satisfaction, and should last long enough to evaluate whether orthodontic treatment in childhood avoids the need for jaw surgery in adulthood.

Metal leakage from orthodontic appliances chemically alters enamel surface during experimental in vitro simulated treatment.

Human enamel is composed mainly of apatite. This mineral of sorption properties is susceptible to chemical changes, which in turn affect its resistance to dissolution. This study aimed to investigate whether metal leakage from orthodontic appliances chemically alters the enamel surface during an in vitro simulated orthodontic treatment. Totally 107 human enamel samples were subjected to the simulation involving metal appliances and cyclic pH fluctuations over a period of 12 months in four complimentary experiments. The average concentrations and distribution of Fe, Cr, Ni, Ti and Cu within the enamel before and after the experiments were examined using ICP‒MS and LA‒ICP‒MS techniques. The samples exposed to the interaction with metal appliances exhibited a significant increase in average Fe, Cr and Ni (Kruskal-Wallis, p < 0.002) content in comparison to the control group. The outer layer, narrow fissures and points of contact with the metal components showed increased concentrations of Fe, Ti, Ni and Cr after simulated treatment, conversely to the enamel sealed with an adhesive system. It has been concluded that metal leakage from orthodontic appliances chemically alters enamel surface and microlesions during experimental in vitro simulated treatment.

Sustained antibacterial activity of orthodontic elastomeric ligature ties coated with a novel kombucha-derived bacterial nanocellulose: An in-vitro study.

Incipient carious lesions, the most common complication in orthodontic patients with fixed appliances, call for the development of novel preventive dental materials that do not rely on patient adherence. The present study aimed to assess the ability of elastomeric ligatures coated with bacterial nanocellulose (BNC) to deliver sustained antibacterial activity, during the standard 28-day interval between orthodontic appointments, without compromising their mechanical properties. Kombucha membrane was used to produce cellulose as a secondary product from the fermentation of tea broth with symbiotic bacteria and yeast culture. Characterization of BNC-coated elastomeric ligatures was performed using Fourier Transform Infrared Spectroscopy and Energy Dispersive Spectroscopy analysis. The samples were pre-treated by immersion first in isopropyl alcohol, then in 8 mL nanocellulose solution for 7 days. Tensile strain and strength of the BNC-coated and conventional ligatures were evaluated using a tensile testing machine. Direct contact and agar diffusion tests were performed to assess the antibacterial activity of nanocellulose. In addition, the release profile of BNC was evaluated. Data analysis was performed by one-way analysis of variance (ANOVA) followed by post-hoc Tukey's test and Wilcoxon signed-rank test. P values less than 0.05 was regarded as significant. There was no statistically significant difference in tensile strain and strength between the BNC-coated and conventional ligatures. The coated ligatures provided sustained antibacterial activity during the required 28 days. The use of BNC-coated elastomeric ligatures in patients with fixed orthodontic appliances might be a promising solution to plaque formation and subsequent enamel decalcification.

Molar distalization in orthodontics: a bibliometric analysis.

OBJECTIVES: The study endeavors to undertake a bibliometric analysis on molar distalization, with the objective of illuminating its evolutionary trajectory, current status, and prognosticating future research hotspots and trends. MATERIAL AND METHODS: A comprehensive exploration of the literature on molar distalization was carried out by conducting a search in the Web of Science (WOS) core database of the University of Hong Kong Electronic Library. The search for topic terms employed included "molar distalization," "molar distalisation," "move molar distally," "molar distal movement," and "molar backwards." The search results were subsequently subjected to meticulous analysis using CiteSpace software. This analysis encompassed various facets such as the citation count; the geographical distribution of the countries, institutions, and journals responsible for publishing the articles; the distribution of the authors; the utilization of keywords within the articles; and the analysis of references. RESULTS: A total of 516 articles were included in the analysis. The top 5 countries in terms of the number of published papers were the United States (USA), South Korea, Turkey, Italy, and Germany, and the top 5 institutions in terms of the number of published papers were Kyung Hee University, A.T. Still University of Health Sciences, Catholic University of Korea, Seoul St. Mary's Hospital, and Universidade de Sao Paulo. The top 5 authors in terms of the number of published papers were Park, Kook, Bayome, Janson, and Lee. There was little cooperation overall. The top 3 journals in terms of the most published related articles were all orthodontic-related journals. After molar distalization and anchorage, the most frequently used keywords were distalization, movement, and pendulum appliance. Kinzinger GSM is the most frequently cited author in references, and one of his articles also has the highest centrality score in references. CONCLUSIONS: As the tides of time shift and scholars display an ever-growing dedication to unraveling the intricacies of this therapeutic modality, the realm of molar distalization has undergone notable advancements in technology. Initially, the traditional appliance suffered from aesthetic drawbacks and discomfort. However, contemporary iterations of the appliance have transcended these limitations, boasting enhanced elegance and convenience while concurrently elevating their efficacy. Nevertheless, limitations of current appliances, including their durability and propensity for recurrence post-treatment, continue to necessitate further advancement. Hence, the ongoing scientific inquiry aims to delve deeper into refining treatment modalities and fabricating cutting-edge appliances within this realm. CLINICAL RELEVANCE: This study holds the potential to significantly enhance the ability of orthodontists to devise treatment protocols and offer state-of-the-art clinical recommendations, thereby empowering them to deliver advanced and refined orthodontic interventions.

Evaluation of the antibacterial effect of titanium dioxide nanoparticles combined with acrylic laminates for functional orthodontic appliances: a randomized controlled clinical trial.

BACKGROUND: The objective of this study was to evaluate the antibacterial effect of titanium dioxide nanoparticles incorporated into the acrylic baseplates of the maxillary part of twin block appliances in orthodontic patients during the treatment period. MATERIALS AND METHODS: Twenty-six patients were selected randomly and divided into two groups(n = 13). Test group patients used orthodontic functional appliances containing 1% titanium dioxide nanoparticles in acrylic baseplates. Control group patients used orthodontic functional appliances without titanium dioxide nanoparticles in acrylic baseplates. Swap samples were taken from the palatal gingiva facing the fitting surface of the acrylic component of the maxillary part of a twin block appliance for each patient at five-time intervals (baseline sample, after one, two, four, and six months) and then cultured in blood agar plates to calculate bacterial colony count. The Mann‒Whitney U test and the Friedman test were used to compare data. Bonferroni correction (p value ≤ 0.05) was applied to detect significant differences. THE RESULTS: showed a decrease in the bacterial colony count in the test group compared to the control group. Pairwise comparisons revealed a statistically significant difference in samples after four- and six-month groups (p values = 0.002 and 0.011, respectively) vs. the one-month test group. A higher statistically significant difference was observed in the six-month group (p-value = 0.037) vs. the baseline group in the control group. CONCLUSION: The addition of 1% titanium dioxide nanoparticles to acrylic baseplates of orthodontic functional appliances significantly reduced the bacterial colony count under the base plate after at least four months of application.

The success rate of mini-screws for incisors intrusion and patient age, gender, and insertion angle in the maxilla using CBCT and implant-guided surgery. A split-mouth, randomized control trail.

BACKGROUND AND OBJECTIVES: The intrusion of anterior teeth is a routine procedure in orthodontics, which has been performed efficiently with the help of mini-screws in the anterior region, especially the upper maxilla. This study aimed to investigate the effect of insertion angle and sociodemographic features on the success rate of mini-screws at the anterior maxillary region. MATERIALS AND METHODS: Twenty-nine patients (18 Females and 11 Males) aged 18-40 years old were involved in the current study. A split-mouth design was carried out in which recruited patients needed bilateral anterior screws at the labial bone in the region of the incisor for the intrusion of upper anterior incisor teeth as part of their orthodontic treatment with a fixed appliance (upper right side received 90-degree insertion angle mini-screw and 45° for left side) using a surgical guide fabricated from patients CBCT and intraoral scans. The mini-screws were inserted at the attached gingiva bilaterally to achieve intrusion of upper anterior teeth with a power chain ligated from the main archwire to the anterior min-implants. The patient was recalled monthly for orthodontic appliance activation and screw assessment for 6 months. The intrusion force was 15 g on each side. RESULTS: The results of the study showed that screw stability was higher in the male group than the female group at the 6th monthly follow-up visit with a statistically significant difference between both genders (P = .044). Concerning insertion angle, results showed a statistically significant difference between 45° and 90° as an insertion angle with a P-value <.01 in most of the follow-up months. CONCLUSION: This study found that male patients with mini-screws inserted at 90° showed greater screw stability over time.

Evaluation of effects of brackets and orthodontic wires on intraoral scans: A prospective in-vivo study.

OBJECTIVE: To evaluate any distortion produced by multibracket fixed orthodontic appliances on digital models obtained from intraoral scans (IOS), considering the presence of both brackets only and brackets/archwire combination. SETTING/SAMPLE: The IOS data of the arches of 20 patients (12 females and 8 males; mean age = 15.55 ± 2.84 years) were acquired using the CS3600 intraoral scanner (Carestream Dental, Atlanta, USA), without any appliances (model A), with vestibular brackets alone (model B) and then with brackets and orthodontic archwire fitted (model C). MATERIALS AND METHODS: Data were acquired between the months of January and October 2021 at the moment of indirect bonding phase. On each model, five intra-arch linear measurements were obtained (inter-canine, inter-premolar 1 and 2, inter-molar and arch depth), and after digital matching between model A and B (match 1) and A and C (match 2), the linear discrepancies were evaluated at 20 points (10 occlusal and 10 gingivolingual) previous identified on the reference model A. All measurements were performed using Geomagic Control X software (3D Systems, Morrisville, USA), and any dimensional variations and distortions were evaluated by the linear regression analysis and two-sample t-test (P ≤ .05). RESULTS: The results show an almost perfect correlation between both models B and C and the reference model A, both as regards the intra-arch linear measurements and the linear discrepancies found at the 20 identified points. CONCLUSIONS: Multibracket fixed orthodontic appliances do not produce any relevant distortions in digital models obtained via intraoral scanning. Therefore, the removal of archwire is not mandatory before IOS.

Use of an intraoral scanner to evaluate orthodontic treatment for dental malocclusion in a dog.

OBJECTIVE: In human dental practice, intraoral scanners (IOSs) are increasingly used to evaluate the oral cavity. However, there have been no reports concerning evaluation of the canine oral cavity using IOSs in veterinary dentistry. In this case, optical impressions obtained with an IOS were used for 3-D evaluation of the orthodontic treatment outcome. Additionally, few reports have addressed the optimal orthodontic force for canine teeth. Therefore, this case explored whether sufficient tooth movement into the extraction site could be achieved with a lighter orthodontic force than previously reported. ANIMAL: An 8-month-old spayed female dog. CLINICAL PRESENTATION, PROGRESSION, AND PROCEDURES: A retained right maxillary third deciduous incisor (503) caused distoversion of the right maxillary third permanent incisor (103), leading to dental malocclusion that involved contact between 103 and the right mandibular canine teeth. TREATMENT AND OUTCOME: All retained deciduous teeth were extracted. Mesial tipping movement of 103 into the extraction site of 503 was achieved with light orthodontic force using an elastomeric chain. An IOS was used to construct 3-D optical impression data from oral stone models taken before and after treatment, and tooth movement was evaluated. The results showed that 103 had sufficient tipping movement and no anchorage loss; comfortable occlusion was achieved. In addition to crown length extension, labioversion and mesioversion of maxillary incisors (other than 103) were observed. CLINICAL RELEVANCE: Detailed intraoral evaluation with optical impressions was beneficial in the orthodontic treatment of a dog. Light orthodontic force may be sufficient for movement into the extraction site.

Adult female skeletal anterior open bite treated by customized lingual orthodontic appliance with miniscrews-assisted in vertical control for perfect orthodontic compensation: A case report with 5-year follow-up.

The benefits of lingual orthodontics go beyond appearance. In this case study, a 30-year-old female patient was treated with a custom lingual orthodontic appliance for a Class II high-angle malocclusion, anterior open bite, incisor biprotrusion and crossbite, unilateral second molar scissor bite and dysfunctional tongue thrust. To achieve a counterclockwise rotation of the mandible, implant anchorage was used to control the vertical height. To complete the compensatory therapy, four first premolars were removed. As well as ensuring aesthetics over the 20-month treatment period, the treatment also established a Class I molar relationship, normal overbite and overjet, and improved the facial profile. After a five-year follow-up, the treatment results remained stable.

Effectiveness of miniscrew-supported maxillary molar distalization according to temporary anchorage device features and appliance design: systematic review and meta-analysis.

OBJECTIVES: To evaluate the effectiveness of distalizing maxillary first molars (U6) by temporary anchorage devices (TADs) according to their location (palatal, buccal, and zygomatic), their number, and appliance design. MATERIALS AND METHODS: An electronic search of maxillary molar distalization with TADs was done through April 2023. After study selection, data extraction, and risk-of-bias assessment, meta-analyses were performed for the extent of distalization, distal tipping, and vertical movement of U6 using the generic inverse variance and random-effects model. The significance level was set at 0.05. RESULTS: Forty studies met the inclusion criteria: 4 randomized controlled trials (RCTs), 13 prospective studies, and 23 retrospective studies (total of 1182 patients). Distalization of the U6 was not significantly greater (P = .64) by palatal (3.74 mm) and zygomatic (3.68 mm) than by buccal (3.23 mm) TADs. Distal tipping was significantly higher (P < .001) in nonrigid (9.84°) than in rigid (1.97°) appliances. Vertical movement was mostly intrusive and higher but not significantly different (P = .28) in zygomatic anchorage (-1.16 mm). CONCLUSIONS: Distalization of U6 with TADs can be an effective and stable treatment procedure, especially when performed with rigid palatal appliances. However, further RCTs or prospective cohort studies are strongly recommended to provide more clinical evidence.

Salivary microbiomes vary among orthodontic appliances and associate with clinical periodontal parameters.

OBJECTIVE: To investigate the salivary bacterial communities during the first 6-month orthodontic treatment with Clear Aligners (CA) and Fixed Appliances (FA), and its correlation with clinical periodontal parameters. MATERIALS AND METHODS: Saliva and periodontal parameters were sampled from individuals wearing CA or FA before treatment (T0), and after 3- (T3) and 6-month (T6) treatments. Salivary bacterial communities characterized based on the 16S rRNA V3-V4 region were compared between FA and CA and correlated with clinical periodontal parameters. RESULTS: Probing Depth (PD) significantly increased at T6 in the FA group versus T0, whereas it remained stable in the CA group. The Shannon and Pielou indices were significantly higher in the FA group and significantly positively correlated with periodontal inflammation parameters. ß-diversity analysis revealed distinct communities between the FA group and CA group at T6. The relative abundances of 3 genera and 15 species were significantly higher in the FA group. Among the above appliance-type related taxa, bacterial genera Selenomonas, Stomatobaculum, Olsenella and Faecalicoccus and bacterial species Selenomonas_sputigena, Dialister_invisus, Olsenella_profus, Prevotella_buccae, Cryptobacterium_curtum and Clostridium_spiroforme were significantly positively associated with periodontal parameters. CONCLUSIONS: Orthodontic treatments trigger appliance-related salivary bacterial communities, highlighting the importance of developing appliance-orientated periodontal strategies during orthodontic treatments. Salivary bacterial communities harboured by patients wearing FA possess higher bacterial parameters which were associated with increasing PD, PI and Gingival Index.

Orthodontists' instructions for oral hygiene in patients with removable and fixed orthodontic appliances.

INTRODUCTION: The aim of this questionnaire-based survey was to evaluate information on frequencies, instructions and products relating to oral hygiene (OH) in orthodontic practices. METHODS: Using a computer-generated randomization list, 1000 orthodontists were selected and sent a questionnaire. The size and number of inhabitants of the federal states of Germany were considered. The federal states with the highest return rate (Baden-Wuerttemberg [BW], Bavaria [B], Hesse [H], Lower Saxony [LS], Nordrhein-Westphalia [NRW]) were considered and differences between the 16 federal states were divided into North, South, East and Central Germany. RESULTS: The response rate of the questionnaires was 52.4%. The majority (53.8%) worked in one practice alone. Most (59.1%) have been orthodontists for 5-25 years. For vestibular multibracket appliances (MBA) in BW, B, H and LS over 90% recommended interdental brushes (IDB). In NRW 91.4% recommend fluoride gel. In B and H more than 80% chose electric toothbrush (ETB), in BW, LS and NRW more than 80% manual toothbrush (MTB). For lingual MBA (LMBA) in BW, H, LS and NRW with approximately 50% each fluoride gel, IDB and MTB were chosen. In B fluoride gel, IDB and ETB. For removable apparatus (RA), five federal states recommended MTB (>80%) and ETB (BW, B, H > 80%; NRW > 70%; LS > 60%). CONCLUSION: Electric toothbrushes are recommended for the use with all appliances, only with removable appliances manual toothbrushes are favoured. For vestibular MBA it is strongly advised to use IDB additionally.