Cochlear Implantation in Patients With Osteolytic Labyrinthitis: A Case Series.

OBJECTIVE: To describe the rare process of osteolytic labyrinthitis, previously referred to as labyrinthine sequestrum, which involves progressive obliteration of the bony and membranous labyrinth with eventual supplantation with soft tissue and, in some cases, bony sequestrum. PATIENTS: Three patients with diverse presentations of osteolytic labyrinthitis from two tertiary care academic medical centers. INTERVENTIONS: Case series report analyzing the relevant clinical, radiologic, pathologic, and surgical data on our patients with osteolytic labyrinthitis and comparing these index cases to the existing literature. MAIN OUTCOME MEASURES: We describe the varying image findings seen in osteolytic labyrinthitis on computed tomography and magnetic resonance imaging. Also, we report successful surgical intervention and hearing rehabilitation with cochlear implantation in patients with osteolytic labyrinthitis. RESULTS: Our three patients presented with profound sudden sensorineural hearing loss and vertigo consistent with labyrinthitis. None of the three patients had a history of chronic otitis media. Imaging workup revealed varying degrees of erosion to the otic capsule bone demonstrating the spectrum of disease seen in osteolytic labyrinthitis. Although two cases showed osteolytic changes to the semicircular canals and vestibule, the first case revealed frank bony sequestrum within the obliterated labyrinth. The three cases were taken for surgical debridement and cochlear implantation. CONCLUSIONS: We propose the new term, osteolytic labyrinthitis-previously referred to as labyrinthine sequestrum-to describe the rare spectrum of disease characterized by destruction of the osseous and membranous labyrinth and potential supplantation with bony sequestrum. Cochlear implantation is a viable option in selected patients with osteolytic labyrinthitis.

Poor clinical outcomes and high rates of dislocation after modular reverse shoulder arthroplasty for proximal humeral oncologic resection.

PURPOSE: The shoulder is the most common site for upper extremity tumors. The aim of the study was to analyze the outcomes and the complications of modular reverse shoulder arthroplasty (RSA) after proximal humerus resection. METHODS: We retrospectively included 15 consecutive patients who underwent a modular MUTARS™ RSA reconstruction after proximal humerus tumour resection between 2017 and 2020. The mean age was 52 years. Their clinical outcomes were assessed using the Constant-Murley score and the MSTS shoulder. Radiological outcomes were assessed based on the presence of loosening, osteolysis, and scapular notching. Complications such as dislocation, oncological recurrence, and infection were assessed. Mean follow-up time was 32.9 months (24 to 45). RESULTS: The mean adjusted Constant score was 50.7% (min 22, max 81), and the mean MSTS score was 15.6 (min 4, max 26). We had no loosening, osteolysis, or scapular notching on the radiographs at last follow-up. We had a high complication rate of 53%: one infection, one oncological recurrence, and six dislocations (40%), of which five were re-operated. CONCLUSION: In our experience, the MUTARS™ Implantcast™ modular RSA has poor functional results and a high rate of dislocation in the case of large proximal humerus resections below the distal insertion of the deltoid.

Long-term polyethylene wear rates and clinical outcomes of oxidized zirconium femoral heads on highly cross-linked polyethylene in total hip arthroplasty.

Aims: Oxidized zirconium (OxZi) and highly cross-linked polyethylene (HXLPE) were developed to minimize wear and risk of osteolysis in total hip arthroplasty (THA). However, retrieval studies have shown that scratched femoral heads may lead to runaway wear, and few reports of long-term results have been published. The purpose of this investigation is to report minimum ten-year wear rates and clinical outcomes of THA with OxZi femoral heads on HXLPE, and to compare them with a retrospective control group of cobalt chrome (CoCr) or ceramic heads on HXLPE. Methods: From 2003 to 2006, 108 THAs were performed on 96 patients using an OxZi head with a HXLPE liner with minimum ten-year follow-up. Harris Hip Scores (HHS) were collected preoperatively and at the most recent follow-up (mean 13.3 years). Linear and volumetric liner wear was measured on radiographs of 85 hips with a minimum ten-year follow-up (mean 14.5 years). This was compared to a retrospective control group of 45 THAs using ceramic or CoCr heads from October 1999 to February 2005, with a minimum of ten years' follow-up. Results: Average HHS improved from 50.8 to 91.9 and 51.0 to 89.8 in the OxZi group and control group, respectively (p = 0.644), with no osteolysis in either group. Linear and volumetric wear rates in the OxZi group averaged 0.03 mm/year and 3.46 mm3/year, respectively. There was no statistically significant difference in HHS scores, nor in linear or volumetric wear rate between the groups, and no revision for any indication. Conclusion: The radiological and clinical outcomes, and survivorship of THA with OxZi femoral heads and HXLPE liners, were excellent, and comparable to CoCr or ceramic heads at minimum ten-year follow-up. Wear rates are below what would be expected for development of osteolysis. OxZi-HXLPE is a durable bearing couple with excellent long-term outcomes.

Impingement-related osteolysis in Motec total wrist arthroplasty: an explant analysis and review of the literature.

We present five cases of osteolysis in the Motec total wrist prosthesis, three around the radial implant, one around the metacarpal implant and one around both. Three of these were progressive and required revision, and biomechanical explant analyses of these revised prostheses were performed. Ex vivo testing of the contact points of the Motec implants was also performed at maximum extension. Here, impingement occurs between the metacarpal screw and the dorsal rim of the cup (non-articulating surfaces) with the short-necked prosthesis, leading to metacarpal screw damage, titanium debris formation and osteolysis. An analysis of three previously published cases suggests that this may have been the likely mode of failure in those cases. This complication is preventable by avoiding use of the short-neck prosthesis.Level of evidence: IV.

Progressive Skull Osteolysis in the Setting of Endotine Implantation: A Case Report.

OBJECTIVES: To report a case of a 71-year-old woman who presented 8 years following 2 endoscopic brow lift procedures for evaluation of bony irregularities of her frontoparietal skull. To highlight a novel complication of Endotine fixation following an endoscopic brow lift procedure. METHODS: A chart review, bicoronal cranioplasty and a review of literature. RESULTS: The patient was satisfied with her post-surgical outcome and no complications were observed at the 1-month follow-up visit. A review of the literature revealed no previous reports of focal skull osteolysis relating to Endotine implants. CONCLUSION: We believe that our patient's focal calvarial osteolysis is a direct complication of Endotine fixation. Future research into the long-term effects of endoscopic brow lift procedures using Endotine implants is necessary to help ensure patient safety and guide future practices.

Does previous arthroscopic Bankart repair influence coracoid graft osteolysis in Latarjet procedure? A case-control study with computed tomography scan data.

BACKGROUND: The Latarjet procedure is commonly performed in the treatment of recurrent shoulder instability and is also indicated as a salvage procedure for recurrence after failed arthroscopic Bankart repair. Although this procedure has shown success, there has been an increased awareness of complications in recent studies, especially graft osteolysis. Most relevant research has focused on the pathophysiology, incidence, or location of graft osteolysis or the risk factors for graft osteolysis; however, the data are limited to primary Latarjet procedures. This study aimed to investigate the effect of previous arthroscopic Bankart repair surgery on coracoid bone graft osteolysis in the Latarjet procedure. METHODS: This retrospective case-control study analyzed data from patients who underwent primary Latarjet procedures or revision Latarjet procedures following failed arthroscopic Bankart repair. Clinical outcome measures included range of motion, the Subjective Shoulder Value, and the Rowe score. Volumetric analysis of each transferred coracoid graft was performed using early postoperative and late postoperative computed tomography scan data, and the amount of graft osteolysis was then calculated as the percentage of volume reduction of each graft. RESULTS: A total of 32 patients who met the inclusion criteria were included in this study, with 24 patients in the primary Latarjet group (group I) and 8 patients in the revision Latarjet group (group II). The mean age of the patients was 32.5 ± 7.7 years, and the mean follow-up duration was 52.1 ± 8.9 months. Both study groups showed significant improvement in the Subjective Shoulder Value compared with baseline (P < .05). Comparison of postoperative clinical outcome measures showed no significant difference in any outcome parameter between the 2 study groups (P > .05). No recurrence was observed during the follow-up period. A positive apprehension sign was present in 6 patients (25%) in group I and 4 patients (50%) in group II (P > .05). Analysis of radiologic data revealed that all patients underwent some degree of graft osteolysis, with varying osteolysis ratios between 12% and 98%. The mean osteolysis ratio of the coracoid graft was 67.3% ± 22.6% in group I and 69.4% ± 25.6% in group II, with no significant difference between the 2 groups (P > .05). CONCLUSION: The findings of this study suggest that a considerable amount of coracoid graft osteolysis is observed after both primary Latarjet procedures and revision Latarjet procedures following failed arthroscopic Bankart repair. Previous arthroscopic Bankart repair did not seem to have a significant influence on the amount of graft osteolysis, and both primary and revision Latarjet procedures showed satisfactory clinical outcomes.

Mean 23-Year Outcomes of Total Hip Arthroplasty Using a Modular Femoral Stem With Metaphyseal Fixation Sleeve.

BACKGROUND: Although the modular sleeve concept for femoral implants has several advantages, studies reporting on greater than 20-year outcomes are limited. This study aimed to report the mean 23-year results of total hip arthroplasty (THA) using a modular stem with metaphyseal fixation sleeve. METHODS: This study reviewed primary THAs performed using a modular stem between October 1994 and April 1998. Of the 272 hips (221 patients) identified, 220 hips (177 patients) satisfying the minimum 20-year follow-up were included. The Harris Hip Score was used for clinical evaluation. Final hip radiographs were analyzed to evaluate the implant stability and the extent of femoral osteolysis. The mean follow-up duration was 23 years (range, 20 to 28). RESULTS: The mean Harris Hip Score improved from 38 points (range, 26 to 67) preoperatively to 90 points (range, 71 to 100) at the final follow-up (P < .001). Femoral osteolysis was observed in 146 hips (67.1%), but 145 were located proximal to the osseo-integrated sleeve. Overall, 4 femoral revisions were performed; 2 for chronic infection, one for aseptic loosening, and one for periprosthetic femoral fracture. Of the 19 (8.6%) periprosthetic femoral fractures, the most common type was Vancouver AG (13 hips). One (0.5%) asymptomatic distal stem fracture occurred, while no complications were identified at the stem-sleeve junction. Implant survivorship free of any femoral revision was 98.3% at 23 years. CONCLUSIONS: A THA using a modular stem with metaphyseal fixation sleeve demonstrated 98.3% stem survivorship with excellent clinical outcomes at a mean follow-up of 23 years in non-obese patients.

Osteolysis After Augmented Scapholunate Ligament Reconstruction: A Report of 3 Cases.

CASE: Augmented scapholunate ligament reconstruction using polyether ether ketone anchors and ultra-high molecular weight polyethylene synthetic tape has the theoretical advantage of improved stability, avoidance of K-wire fixation, and the potential for earlier mobilization. We present 3 cases of scaphoid and lunate osteolysis/fragmentation, operative and histologic findings at reoperation, and the sequelae of this technique. CONCLUSION: If planning to use suture anchors and synthetic tapes in small carpal bones, we recommend advising patients about the risk of osteolysis and monitoring closely patients who complain of pain with motion after surgery.

Computer-aided Design and 3D-printed Personalized Stem-plate Composite for Precision Revision of the Proximal Humerus Endoprosthetic Replacement: A Technique Note.

BACKGROUND: Aseptic loosening is considered to be a rather uncommon complication in proximal humerus endoprosthetic replacement (PHER). However, patients with aseptic loosening often suffer severe bone loss, which poses a great challenge in following revision. Under this situation, a standard stemmed endoprosthesis is unavailable for revision limb salvage. Computer-aided design and 3D-printed personalized implants are an emerging solution for reconstructing complex bone defects. CASE PRESENTATION: Here, we present a 67-year-old male who underwent PHER after tumor resection and developed aseptic loosening with severe periprosthetic osteolysis around the stem. Computer-aided design and 3D-printed personalized stem-plate composite was used for the precision revision of this patient. During the follow-up, encouraging results were observed, with good endoprosthetic stability and satisfactory limb function. CONCLUSION: Computer-aid design and 3D-printed personalized stem-plate composite used in the present case could help to achieve good endoprosthetic stability and satisfactory limb function. This 3D-printed personalized stem-plate composite seems to be an effective method for the precise revision of PHER in patients with severe periprosthetic osteolysis. In addition, it also provides a novel method for similar revision surgery of other joints or primary endoprosthetic replacement with severe bone defects.

Fabricating Stiffness-Matched Three Dimensional -Printed Metal Implants for Total Wrist Arthroplasty.

BACKGROUND: Total wrist arthroplasty (TWA) is a motion-sparing treatment for pancarpal arthritis; however, complication rates up to 50% have limited widespread use. Implant micromotion, stress shielding, and periprosthetic osteolysis result in implant failure and revision to arthrodesis. Metal 3-dimensional (3D) printing allows for more accurate matching of surrounding bone biomechanical properties, theoretically reducing periprosthetic osteolysis. Herein, we use computed tomography to characterize the relationship of relative stiffness along the length of the distal radius with patient demographic factors. METHODS: After institutional review, wrist computed tomography scans at a single institution between 2013 and 2021 were identified. Exclusion criteria were history of radius or carpal trauma or fracture. Collected demographics included age, sex, and comorbidities (including osteoporosis/osteopenia). Scans were analyzed using Materialize Mimics Innovation Suite 24.0 (Leuven, Belgium). Distal radius cortical density (in Hounsfield units) and medullary volume (in cubic millimeters) with relation to distance from the radiocarpal joint were recorded. Average values for each variable were used to 3D-printed distal radius trial components with stiffness matched to bone density by length. RESULTS: Thirty-two patients met inclusion criteria. Distal radius cortical bone density progressively increased proximal to the radiocarpal joint, whereas medullary volume decreased; changes in both plateaued 20 mm proximal to the joint. Distal radius material properties differed by age, sex, and comorbidities. Total wrist arthroplasty implants were fabricated to match these variables as proof of concept. CONCLUSIONS: Distal radius material properties vary along the bone length; conventional implants do not account for this variance. This study showed 3D-printed implants can be created to match bone properties along the length of the implant.

Synovial Calprotectin for Diagnosing Periprosthetic Joint Infection in Loose Hip and Knee Arthroplasties: A Prospective Cohort Study.

BACKGROUND/AIM: Synovial calprotectin has been demonstrated as a promising biomarker for periprosthetic joint infections (PJI) in painful total hip (THA) and knee arthroplasties (TKA). However, its diagnostic utility has not been evaluated explicitly in cases with marked loosening or migration of the implant. Concerns have already been raised in cases with metallosis and severe periprosthetic osteolysis because wear-induced inflammation may yield false positive results. The purpose of this study was to evaluate calprotectin for the diagnosis of PJI in cases that preoperatively demonstrate moderate to severe periprosthetic osteolysis or implant migration as signs for implant loosening in THA and TKA. PATIENTS AND METHODS: Thirty-three patients were included in this prospective study between February of 2019 and November of 2021. The extent of osteolysis was classified according to Engh et al., Paprosky et al., and the modern Knee Society Radiographic Evaluation and Scoring System. Synovial white blood cell count (WBC), percentage of polymorphonuclear neutrophils (PMC), serum C-reactive protein (CRP) and synovial calprotectin using a lateral-flow-assay were tested against the European Bone and Joint Infection Society (EBJIS) definition for PJI. Statistic quality criteria were calculated and compared using a binary classification test. RESULTS: Ten patients were classified as confirmed infections according to the EBJIS definition (7 THA and 5 TKA). The calprotectin assay yielded a sensitivity of 0.60, a specificity of 0.61, a positive predictive value of 0.40, and a negative predictive value of 0.78. The calprotectin assay resulted in nine false positive and four false negative cases. No correlation between the extent of osteolysis and false classification by means of the calprotectin assay was observed. CONCLUSION: The diagnostic accuracy of synovial calprotectin is impaired if moderate to severe signs of implant loosening are present. If PJI is unlikely, the calprotectin LFT can be applied as a further exclusion tool as the negative predictive value remains relatively high.

How is hip anatomy reconstruction and inlay wear associated up to 10 years after primary THA using ceramic on highly crosslinked polyethylene bearings?

INTRODUCTION: Conventional polyethylene (PE) wear has been reported to be associated with femoral offset reconstruction and cup orientation after THA. Thus, the present study aimed (1) to determine the polyethylene wear rate of 32 mm ceramic heads with highly cross-linked polyethylene (HXLPE) inlays up to 10 years postoperatively and (2) to identify patient and surgery-related factors affecting the wear rate. METHODS: A prospective cohort study was performed, investigating 101 patients with 101 cementless THAs and ceramic (32 mm) on HXLPE bearings after 6-24 months, 2-5 years and 5-10 years postoperatively. The linear wear rate was determined using a validated software (PolyWare®, Rev 8, Draftware Inc, North Webster, IN, USA) by two reviewers, blinded to each other. A linear regression model was used to identify patient and surgery-related factors on HXLPE -wear. RESULTS: After an initial bedding-in phase of 1 year after surgery, the mean linear wear rate was 0.059 ± 0.031 mm/y at ten years (mean 7.7 years; SD 0.6 years, range 6-10), being below the osteolysis relevant threshold of 0.1 mm/year. The regression analysis demonstrated that age at surgery, BMI, cup inclination or anteversion and the UCLA score were not associated with the linear HXLPE-wear rate. Only increased femoral offset showed a significant correlation with an increased HXLPE-wear rate (correlation coefficient of 0.303; p = 0.003) with a moderate clinical effect size (Cohen's f²=0.11). CONCLUSION: In contrast to conventional PE inlays, hip arthroplasty surgeons may be less concerned about osteolysis-related wear of the HXLPE if the femoral offset is slightly increased. This allows focusing on joint anatomy reconstruction, hip stability and leg length.

Aseptic loosening of tumor prostheses in distal femur after revision surgery: a retrospective study.

BACKGROUND: Tumor prostheses of the distal femur after revision surgery is associated with high rates of aseptic loosening, which has introduced great challenges to the survival of patients, but only a few studies have evaluated their X-ray imaging. The purpose of this study was to analyze the risk factors for recurrence of aseptic loosening and make recommendations to reduce the incidence of aseptic loosening after revision surgery of tumor prostheses in the distal femur. METHOD: A retrospective analysis was performed on 23 patients who had revision surgery for distal femur prostheses due to aseptic loosening between June 2002 and June 2021. They were divided into two groups based on the condition of the prostheses after revision surgery: loosening group (9 patients) and control group (14 patients). Following the initial replacement, the length and diameter of the prosthetic intramedullary stem were measured through the standard full-length anteroposterior X-ray imaging of both lower limbs. The osteotomy length, femoral length and diameter, femoral intramedullary stem diameter, hip-knee-ankle angle (HKAA), mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), and so on were measured as well. Following that, statistical analysis was performed. RESULTS: Patients in the loosening group had statistically significant differences in the ratio of prostheses length to femur length (71.89 ± 6.62) and the ratio of intramedullary stem diameter to femoral diameter (25.50 ± 6.90) (P < 0.05), when compared to the control group. The HKAA (175.58 ± 2.78), mLDFA (94.42 ± 2.57), and the deviation angle between the lower limb alignment and the tibial prostheses force line (2.23 ± 1.09) in the loosening group were significantly different from those in the control group (P < 0.05) on postoperative radiographs of the entire length of the lower limbs. The lowest score in intramedullary manubrium I indicated less osteolysis, while the highest score in intramedullary manubrium III indicated the most serious osteolysis, and the difference was statistically significant (P < 0.05). CONCLUSIONS: Our study suggests that the use of longer and thicker intramedullary stems can effectively decrease the occurrence of aseptic loosening. Additionally, it is important to avoid using the original prostheses and reconstruct the standard line of lower limb force to further reduce the incidence of aseptic loosening. It is crucial to closely monitor the distal segment of the intramedullary stem for osteolysis after surgery.

Satisfactory clinical and radiographic outcomes following revision total hip arthroplasty by direct anterior approach using primary femoral stems at 2-8 years of follow-up.

INTRODUCTION: To report clinical and radiographic outcomes of revision total hip arthroplasty (THA) through the direct anterior approach (DAA) using primary stems. MATERIALS AND METHODS: The authors assessed a consecutive series of revision THAs operated by DAA using primary (cemented and uncemented) stems between 1/1/2010 and 30/06/2017. The initial cohort comprised 47 patients (50 hips), aged 65 ± 10 years with BMI of 25 ± 4 kg/m2. Clinical assessment included modified Harris Hip Score (mHHS) and satisfaction with surgery. Radiographic assessment included radiolucent lines > 2 mm, bone remodelling, cortical hypertrophy, pedestal formation, and osteolysis. Linear regression analyses were performed. RESULTS: Of the 50 hips (47 patients) in the initial cohort, intraoperative complications that did not require re-revision occurred in 5 hips. At a follow-up of > 2 years: 5 hips (10%) were lost to follow-up and 3 hips (6%) required stem re-revision, leaving a final cohort of 42 hips (40 patients). Postoperative complications that did not require re-revision occurred in 4 hips (8%). At 4.3 ± 1.6 years, post-revision mHHS was 89 ± 14 (range 47-100) and 38 patients were satisfied or very satisfied with revision surgery. Bone remodelling was observed in 8 hips (16%), cortical hypertrophy in 6 hips (12%), grade I heterotopic ossification in 7 hips (14%), and grade II in 1 hip (2%). There were no cases of radiolucent lines, pedestal formation, or osteolysis. Regression analyses revealed that post-revision mHHS was not associated with any variable. CONCLUSIONS: Revision THA performed through the DAA using primary stems grants satisfactory clinical and radiographic outcomes at a minimum follow-up of two years.

Talar component subsidence correlates with periprosthetic osteolysis after total ankle arthroplasty.

PURPOSE: This study aimed to investigate the relationship between periprosthetic osteolysis around the talar component and the amount of talar component subsidence after total ankle arthroplasty (TAA). METHODS: This study included forty patients who underwent TAA with a mean follow-up of 67.5 ± 17.0 months. The patients were divided into two groups based on the amount of osteolysis around the talar component, as measured by computed tomography at the latest clinic visit: none to 2 mm (N group, n = 20) and greater than or equal to 2 mm (O group, n = 20). The average amount of talar component subsidence, clinical outcomes, and complications were compared between the two groups. In the O group, the correlation between osteolysis and talar component subsidence was evaluated. RESULTS: The average talar component subsidence was significantly different between the N (0.22 ± 0.94 mm) and O groups (2.12 ± 2.28 mm). Five out of 20 ankles in the O group required revision surgery owing to talar component subsidence. The Japanese Society for Surgery of the Foot scores in the N and O groups were significantly different: 93.5 ± 7.7 and 85.3 ± 15.4, respectively. In the O group, we found that osteolysis tended to develop on the lateral side, and the amount of osteolysis was positively correlated with the talar component subsidence (r = 0.59, P = .007). CONCLUSION: In the O group, a positive correlation between osteolysis and talar component subsidence was found, and five patients required revision surgery.

Outcomes After Revision Total Knee Arthroplasty From a Specific, Now-Recalled Implant System.

BACKGROUND: A specific total knee arthroplasty (TKA) implant system was recently recalled for high incidence of early polymeric wear and osteolysis. We analyzed the early outcomes of aseptic revision with these implants. METHODS: We identified 202 aseptic revision TKAs of this implant system performed at a single institution between 2010 and 2020. Revision indications included aseptic loosening (n = 120), instability (n = 55), and polymeric wear/osteolysis (n = 27). Components were revised in 145 cases (72%) and isolated polyethylene insert exchange occurred in 57 cases (28%). Kaplan-Meier and Cox proportional hazards analyses were used to determine survivorship free from all-cause rerevision and rerevision risk factors. RESULTS: At 2 and 5 years, survivorship free from all-cause rerevision was 89 and 76% in the polyethylene exchange cohort versus 92 and 84% in the component revision cohort (P = .5). At 2 and 5 years, survivorship in revision with components from the same manufacturer was 89 and 80% compared to 95 and 86% in revision with components from a different manufacturer (P = .2). Among re-revisions (n = 30), cones (37%), sleeves (7%), hinge/distal femoral replacement implants were frequently used (13%). Men had increased risk for rerevision (hazard ratio = 2.3, P = .04). CONCLUSION: In this series of aseptic revision TKAs performed on a now-recalled implant system, survivorship free from rerevision was lower than expected when components from the same manufacturer were utilized, but comparable to contemporary reports when both the components were revised with an alternative implant system. Metaphyseal fixation with cones and sleeves as well as highly constrained implants was frequently utilized at time of rerevision TKA. LEVEL OF EVIDENCE: Level IV.

Ten to 13-Year Results of Delta Ceramic-on-Ceramic Total Hip Arthroplasty in Patients Less Than 30 Years Old.

BACKGROUND: We previously reported mid-term results of total hip arthroplasty (THA) using Delta ceramic-on-ceramic (CoC) bearings in 72 patients (86 hips) who were <30 years old. Noise was noted in 8 (9.3%) of the hips, no osteolysis or loosening was detected, and no patient required reoperation. The purpose of this study was to assess clinical and radiographic outcomes, complications, and survivorship at >10 years after THA using Delta CoC bearings in patients who were <30 years old. METHODS: Cementless THA with a Delta CoC bearing was performed between March 2008 and January 2012 in 91 hips of 76 patients who were <30 years old. Eighty-five hips in 71 patients (44 men and 27 women) with a mean age of 25.9 years (range, 16 to 29 years) at surgery were followed for a mean of 10.9 years (range, 10 to 13 years). RESULTS: No ceramic bearings fractured. The incidence of squeaking increased to 5.9% (5 of 85), but the squeaking was not reproducible within individual patients. Periprosthetic osteolysis developed in 3 hips (3 patients): around the stem in 2 and around the metal shell in 1. The stem in 1 hip underwent revision because of a Vancouver type-B2 periprosthetic femoral fracture. One patient with systemic lupus erythematosus underwent irrigation and debridement for periprosthetic joint infection. Survivorship free of reoperation for any reason was 92.4% (95% confidence interval, 82.4% to 100%) at 13 years. CONCLUSIONS: The long-term results and survivorship of Delta CoC THA in patients <30 years old were favorable. LEVEL OF EVIDENCE: Therapeutic Level II . See Instructions for Authors for a complete description of levels of evidence.

Finite Element Analysis of Mechanical Characteristics of Internal Fixation for Treatment of Proximal Femoral Osteolytic Lesions in Children.

OBJECTIVES: Clinically, it is very difficult to prevent pathological fracture caused by high recurrence rate of osteolytic disease of proximal femur in children. At present, there is no consensus in clinical studies of which internal fixation method can significantly reduce the probability of recurrence of pathological fracture. The study aims to research the mechanical properties of different internal fixations in the treatment of osteolytic lesions of proximal femur in children by finite element analysis, and to find out the optimal treatment. METHODS: Based on finite element analysis, the osteolytic disease models of the femoral neck and intertrochanter in a child (8-year-old, boy) were established respectively, and different internal fixation models (plate and titanium elastic intramedullary nails, TENs) were assembled. For the osteolytic lesion of the femoral neck: model A1 was assembled with a plate; model A2 with two TENs crossing the physis; model A3 with two TENs without crossing the physis. And for pertrochanteric osteolytic lesion: model B1 was assembled with a plate, model B2 with two TENs crossing the physis and model B3 with two TENs without crossing the physis. The Eccentric bearing load, torsional restraintal restraint of calcar femorale and composite load were analyzed for each models. RESULTS: When the yield strain of each model is reached, the stress concentration points are located in the proximal and distal femoral calcar. In the model of femoral neck lesions, the failure load of model A1 and model A2 are the same (1250 N), and the failure load of model A3 (980 N) is significantly lower than that of the former two; in the model of intertrochanteric lesions, the failure load of model B2 is the largest (1350 N), and the failure load of model B1 (1220 N) is lower than that of model B3 (1260 N), but both are smaller than that of model B2. CONCLUSION: Through finite element analysis, TENs through the epiphyseal plate, is found to be the better internal fixation method for femoral neck lesions and intertrochanteric lesions under two different working conditions. The results of clinical correlation study provide new biomechanical information for orthopedic doctors to consider different treatment options for osteolytic lesions of proximal femur.

Long-Term Outcomes of Cementing Highly Cross-Linked Polyethylene Liners Into Well-Fixed Acetabular Shells in Revision Total Hip Arthroplasty.

BACKGROUND: Cementing a new liner into a secure, well-positioned metallic shell can be a less-invasive strategy in revision total hip arthroplasty (THA). This study aimed to report the mean 14-year outcomes of cementing highly cross-linked polyethylene (XLPE) liners into well-fixed acetabular shells in revision THAs. METHODS: This study reviewed a single-surgeon series of cementing XLPE liners into well-fixed acetabular components. Of the 52 hips (51 patients) evaluated, 48 hips (47 patients) that satisfied a minimum follow-up of 10 years were included. The Harris Hip score was used for clinical evaluation. Final hip radiographs were used to determine the extent of acetabular osteolysis and stability of the components. The mean age at index operation was 53 years (range, 32 to 72). The mean follow-up duration was 14 years (range, 10 to 18). RESULTS: The mean Harris Hip score improved from 58 points (range, 23-81) preoperatively to 91 points (range, 45-100) at the final evaluation (P < .001). A total of 3 acetabular rerevisions were performed, all for aseptic loosening of the outer shell. One postoperative dislocation occurred, but it was successfully treated with a closed reduction. Final radiographs showed a significant reduction in acetabular osteolysis (P < .001). Implant survivorship free from any rerevision was 93.3% (95% confidence interval, 85.9-100%) at 14 years. CONCLUSION: Cementing an XLPE liner into a well-fixed acetabular shell in revision THA demonstrated excellent clinical and radiographic outcomes at a mean of 14 years postoperatively. This technique could be a safe and durable option in the absence of XLPE liners compatible with preimplanted shells.