Sequential Assessment of External Nasal Deviation Angle Changes in Patients With a Deviated Nose Who Underwent Bilateral Osteotomy.

OBJECTIVE: A deviated nose is traditionally classified as bony, cartilaginous, or combined deviation. Osteotomy is commonly used to correct bony deviation, and accurate surgical techniques and postoperative patient management are important for favorable outcomes. The authors investigated the change in the external nasal deviation angle over time using sequential clinical photographs to identify the optimal postoperative follow-up duration. METHODS: Medical records and sequential standardized clinical photographs of 22 patients who underwent bilateral medial and lateral osteotomies without dorsal augmentation from January 1, 2014 to May 31, 2021, were retrospectively reviewed. Clinical photographs were classified into 4 periods: "a" preoperative, "b" postoperative day (POD) ≤3 weeks, "c" POD ≤9 weeks, and "d" POD >9 weeks. The angle of deviation (AoD) was measured in both frontal and chin-on-chest views for each period. Differences in AoD between temporally adjacent periods were analyzed. RESULTS: Nineteen men and 3 women (mean age: 28.8 y) were included. Thirteen patients showed rightward deviation, whereas 9 showed leftward deviation. Eleven patients underwent surgery through an endonasal approach, whereas the other 11 underwent surgery through an external approach. In the frontal view, AoD differences (mean ± SD) between periods "a" and "b," "b" and "c," and "c" and "d" were 5.79 ± 3.36 degrees (P < 0.001), 1.44 ± 1.14 degrees (P < 0.001), and 1.07 ± 1.24 degrees (P < 0.05), respectively. In the chin-on-chest view, the values were 5.17 ± 2.69 degrees (P < 0.001), 2.06 ± 2.63 degrees (P < 0.001), and 1.46 ± 1.31 degrees (P < 0.001), respectively. No statistically significant difference in AoD differences was observed between the two approaches. CONCLUSIONS: Angle of deviation can change even 9 weeks after bilateral osteotomy. Thus, long-term follow-up using sequential clinical photographs is mandatory. If needed, close follow-up with early postoperative interventions may be required. The chin-on-chest view showed better sensitivity for assessing AoD than the frontal view.

Joint-Preserving Surgery for Hallux Valgus Deformity in Rheumatoid Arthritis.

Background: Rheumatoid arthritis (RA) is a chronic autoimmune disorder that frequently causes forefoot deformities. Arthrodesis of the first metatarsophalangeal joint is a common surgery for severe hallux valgus. However, joint-preserving surgery can maintain the mobility of the joint. This study aimed to investigate the clinical and radiographic outcomes of distal chevron metatarsal osteotomy (DCMO) for correcting hallux valgus deformity associated with RA. Methods: Between August 2000 and December 2018, 18 consecutive patients with rheumatoid forefoot deformities (24 feet) underwent DCMO for hallux valgus with/without lesser toe surgery. Radiological evaluations were conducted, assessing the hallux valgus angle, the intermetatarsal angle between the first and second metatarsals, and the Sharp/van der Heijde score for erosion and joint space narrowing. Clinical outcomes were quantified using a visual analog scale for pain and the American Orthopaedic Foot and Ankle Society forefoot scores to measure function and alignment. Results: The mean hallux valgus angle decreased from 38.0° (range, 25°-65°) preoperatively to 3.5° (range, 0°-17°) at the final follow-up (p < 0.05). The mean intermetatarsal angle decreased from 14.9° (range, 5°-22°) preoperatively to 4.3° (range, 2°-11°) at the final follow-up. (p < 0.05). Regarding the Sharp/van der Heijde score, the mean erosion score (0-10) showed no significant change, decreasing from 3.83 (range, 0-6) preoperatively to 3.54 (range, 0-4) at the final follow-up (p = 0.12). Recurrent hallux valgus was observed in 1 patient and postoperative hallux varus deformity was observed in 2 feet. Spontaneous fusion of the metatarsophalangeal joint developed in 1 case. Conclusions: DCMO resulted in satisfactory clinical and radiographic outcomes for correcting RA-associated hallux valgus deformity.

Medial malleolar osteotomy in the treatment of osteochondral lesions of the Talus - incidence and impact on functional outcome: a retrospective analysis based on data from the German Cartilage Register (KnorpelRegister DGOU).

BACKGROUND: There has long been discussion regarding the impact of medial malleolar osteotomies (MMO) as an adjunctive treatment for osteochondral lesions of the talus (OCLT). MMO may improve the visibility and accessibility of the talus, but they also pose a risk of periprocedural morbidity. There is a lack of research about the prevalence and consequences of MMO in the surgical treatment of OCLT. METHODS: This study retrospectively evaluated data from the German Cartilage Register (KnorpelRegister DGOU) from its implementation in 2015 to December 2020. The impact of MMO on patient-reported outcome measures (PROMs) was investigated. Wherever possible, subgroups were built and matched using a propensity score which matched a group undergoing OCLT without MMO. Matching included age, sex, weight, localization of the OCLT, the international cartilage repair society (ICRS) grading, surgical procedure and preoperative symptoms using the Foot and Ankle Ability Measure (FAAM) and the Activities of Daily Living Subscale (ADL). RESULTS: The prevalence of MMO in the operative treatment of OCLT was 15.9%. Most of the osteotomies were performed in OCL of the medial talar dome (76.8%) and in more serious lesions with an ICRS grade of III (29.1%) and IV (61.4%). More than half of the osteotomies (55.6%) were performed during revision surgery. A matched pair analysis of n = 44 patients who underwent AMIC® via arthrotomy and MMO vs. arthrotomy alone showed no significant differences in patient-reported outcome measures (PROMs, i.e. FAAM-ADL, and FAOS) at 6,12 and 24 months. CONCLUSIONS: MMO are mostly used in the treatment of severe (≥ ICRS grade 3) OCL of the medial talar dome and in revision surgery. Functional and patient-reported outcome measures are not significantly affected by MMO compared to arthrotomy alone. TRIAL REGISTRATION: The German Cartilage Register (KnorpelRegister DGOU) was initially registered at the German Clinical Trials Register ( https://www.drks.de , register number DRKS00005617, Date of registration 03.01.2014) and was later expanded by the ankle module.

[Evaluation of the efficacy of medial open wedge high tibial osteotomy combined with anterior cruciate ligament reconstruction in the treatment of varus knee osteoarthritis with anterior cruciate ligament injury].

Objective: To evaluate the efficacy of medial open wedge high tibial osteotomy (MOWHTO) combined with anterior cruciate ligament (ACL) reconstruction in the treatment of varus knee osteoarthritis (OA) with ACL injury. Methods: A follow-up study. The study retrospectively analyzed the patients underwent MOWHTO combined with ACL reconstruction for treatment of varus knee OA with ACL injury in Tianjin Hospital between April 2018 and September 2022. The preoperative and postoperative posterior slope angle (PSA), hip-knee-ankle angle (HKA), visual analog scale (VAS) pain scores, Lysholm score, International Knee Documentation Committee (IKDC) score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and Tegner score were compared. The follow-up indicators were recorded at 6 weeks, 3 months and 1 year after operation, and the complications were recorded. Results: The study included 32 patients (23 males, 9 females) with a mean age of (50.7±8.4) years. The mean follow-up time was (21.2±4.8) months. PSA increased from 9.2°±1.8° preoperatively to 11.1°±2.4° postoperatively, and HKA increased from 168.7°±2.2° to 181.5°±2.2° (both P<0.01). The indicators such as VAS score (6.8±1.1 vs 1.8±0.4), Lysholm score (52.6±7.1 vs 82.0±6.4), IKDC score (64.7±6.2 vs 80.3±10.0), WOMAC score (51.8±6.3 vs 81.8±6.5), and Tegner score (1.9±0.6 vs 5.0±1.0) were all improved after the operation (all P<0.01). Complications occurred in 5 patients (15.6%), including hematomas, sensory abnormalities, intermuscular vein thrombosis and correction angle loss. Conclusion: MOWHTO combined with ACL reconstruction is a safe and effective approach for the treatment of varus knee OA with ACL injury.

The incidence of subsequent hip arthroscopy after rectus-sparing periacetabular osteotomy.

Aims: Periacetabular osteotomy (PAO) is the preferred treatment for symptomatic acetabular dysplasia in adolescents and young adults. There remains a lack of consensus regarding whether intra-articular procedures such as labral repair or improvement of femoral offset should be performed at the time of PAO or addressed subsequent to PAO if symptoms warrant. The purpose was to determine the rate of subsequent hip arthroscopy (HA) in a contemporary cohort of patients, who underwent PAO in isolation without any intra-articular procedures. Methods: From June 2012 to March 2022, 349 rectus-sparing PAOs were performed and followed for a minimum of one year (mean 6.2 years (1 to 11)). The mean age was 24 years (14 to 46) and 88.8% were female (n = 310). Patients were evaluated at final follow-up for patient-reported outcome measures (PROMs). Clinical records were reviewed for complications or subsequent surgery. Radiographs were reviewed for the following acetabular parameters: lateral centre-edge angle, anterior centre-edge angle, acetabular index, and the alpha-angle (AA). Patients were cross-referenced from the two largest hospital systems in our area to determine if subsequent HA was performed. Descriptive statistics were used to analyze risk factors for HA. Results: A total of 16 hips (15 patients; 4.6%) underwent subsequent HA with labral repair and femoral osteochondroplasty, the most common interventions. For those with a minimum of two years of follow-up, 5.3% (n = 14) underwent subsequent HA. No hips underwent total hip arthroplasty and one revision PAO was performed. Overall, 17 hips (4.9%) experienced a complication and 99 (26.9%) underwent hardware removal. All PROMs improved significantly postoperatively. Radiologically, 80% of hips (n = 279) reached the goal for acetabular correction (77% for acetbular index and 93% for LCEA), with no significant differences between those who underwent subsequent HA and those who did not. Conclusion: Rectus-sparing PAO is associated with a low rate of subsequent HA for intra-articular pathology at a mean of 6.2 years' follow-up (1 to 11). Acetabular correction alone may be sufficient as the primary intervention for the majority of patients with symptomatic acetabular dysplasia.

Precise execution of personalized surgical planning using three-dimensional printed guide template in severe and complex adult spinal deformity patients requiring three-column osteotomy: a retrospective, comparative matched-cohort study.

BACKGROUND: The surgical treatment of severe and complex adult spinal deformity (ASD) commonly required three-column osteotomy (3-CO), which was technically demanding with high risk of neurological deficit. Personalized three dimensional (3D)-printed guide template based on preoperative planning has been gradually applied in 3-CO procedure. The purpose of this study was to compare the efficacy, safety, and precision of 3D-printed osteotomy guide template and free-hand technique in the treatment of severe and complex ASD patients requiring 3-CO. METHODS: This was a single-centre retrospective comparative cohort study of patients with severe and complex ASD (Cobb angle of scoliosis > 80° with flexibility < 25% or focal kyphosis > 90°) who underwent posterior spinal fusion and 3-CO between January 2020 to January 2023, with a minimum 12 months follow-up. Personalized computer-assisted three-dimensional osteotomy simulation was performed for all recruited patients, who were further divided into template and non-template groups based on the application of 3D-printed osteotomy guide template according to the surgical planning. Patients in the two groups were age- and gender- propensity-matched. The radiographic parameters, postoperative neurological deficit, and precision of osteotomy execution were compared between groups. RESULTS: A total of 40 patients (age 36.53 ± 11.98 years) were retrospectively recruited, with 20 patients in each group. The preoperative focal kyphosis (FK) was 92.72° ± 36.77° in the template group and 93.47° ± 33.91° in the non-template group, with a main curve Cobb angle of 63.35° (15.00°, 92.25°) and 64.00° (20.25°, 99.20°), respectively. Following the correction surgery, there were no significant differences in postoperative FK, postoperative main curve Cobb angle, correction rate of FK (54.20% vs. 51.94%, P = 0.738), and correction rate of main curve Cobb angle (72.41% vs. 61.33%, P = 0.101) between the groups. However, the match ratio of execution to simulation osteotomy angle was significantly greater in the template group than the non-template group (coronal: 89.90% vs. 74.50%, P < 0.001; sagittal: 90.45% vs. 80.35%, P < 0.001). The operating time (ORT) was significantly shorter (359.25 ± 57.79 min vs. 398.90 ± 59.48 min, P = 0.039) and the incidence of postoperative neurological deficit (5.0% vs. 35.0%, P = 0.018) was significantly lower in the template group than the non-template group. CONCLUSION: Performing 3-CO with the assistance of personalized 3D-printed guide template could increase the precision of execution, decrease the risk of postoperative neurological deficit, and shorten the ORT in the correction surgery for severe and complex ASD. The personalized osteotomy guide had the advantages of 3D insight of the case-specific anatomy, identification of osteotomy location, and translation of the surgical planning or simulation to the real surgical site.

Superior Pain Reduction with Anteromedialization Tibial Tubercle Osteotomy Versus Non-Operative Management for Patellofemoral Osteoarthritis.

PURPOSE: The purpose of this study was to compare the clinical outcomes of patients with patellofemoral osteoar-thritis (PFOA) treated non-operatively with those treated operatively with an unloading anteromedialization tibial tubercle osteotomy (TTO). METHODS: A retrospective chart review was performed to identify patients with isolated PFOA who were either managed non-operatively or surgically with a TTO and who had a minimum follow-up of 2 years. Patients were surveyed with the visual analog scale (VAS) for pain, Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS-JR), Anterior Knee Pain scale (Kujala), and Tegner Activity scale. Statistical analysis included two-sample t-testing, one-way ANOVA, and bivariate analysis. RESULTS: The clinical outcomes of 49 non-operatively managed patients (mean age: 52.7 ± 11.3 years; mean follow-up: 1.7 ± 1.0 years) and 35 operatively managed patients (mean age: 31.8 ± 9.4 years; mean follow-up: 3.5 ± 1.7 years) were assessed. The mean VAS improved sig-nificantly in both groups [6.12 to 4.22 (non-operative), p < 0.0001; 6.94 to 2.45 (TTO); p < 0.0001], with operatively treated patients having significantly lower postoperative pain than non-operatively managed patients at the time of final follow-up [2.45 (TTO) vs. 4.22 (non-operative), p < 0.001]. The mean KOOS-JR score was significantly greater in the operative group at time of final follow-up [78.7 ± 11.6 (TTO) vs. 71.7 ± 17.8 (non-operative), p = 0.035]. There was no significant difference in Kujala or Tegner scores between the treatment groups. Additionally, there was no sig-nificant relationship between the number of intra-articular injections, duration of NSAID use, and number of physical therapy sessions on clinical outcomes in the non-operatively treated group (p > 0.05). CONCLUSIONS: An unloading anteromedialization TTO provides significantly better pain relief and restoration of function compared to non-operative management in the treatment of symptomatic PFOA.

Transiliac-Shortening Osteotomy to Treat Ischial Pressure Injury due to Fixed Pelvic Obliquity: A Case Report.

CASE: A 17-year-old adolescent boy with Gross Motor Function Classification System 5 cerebral palsy and neuromuscular scoliosis underwent posterior spinal fusion and segmental spinal instrumentation from T3 to the pelvis. He developed a right ischial pressure injury a few months postoperatively, which persisted despite nonoperative measures. He subsequently underwent an ipsilateral transiliac-shortening osteotomy 16 months after spinal surgery to treat his residual pelvic obliquity and the ischial pressure injury, which healed completely. At the 1-year follow-up visit, there were no further signs of pressure injury. CONCLUSION: This case report describes transiliac-shortening osteotomy as a viable treatment option for non-healing ischial pressure injuries secondary to fixed pelvic obliquity.

Improving standard volar plate fixation in 3D-guided corrective osteotomy of the distal radius: evaluation of a shim instrument.

Standard volar plates often do not fit the surface of the malunited distal radius after osteotomy, necessitating an offset angle for accurate volar tilt correction. The correction can be achieved if the plate is held at the correct angle when the distal screws are locked. With the advantage of 3D surgical planning and patient-specific instruments, we developed a shim instrument to assist the surgeon in securing the plate at the intended angle when locking the distal screws, and evaluated radiological results. Five female patients aged 63-74 with dorsally angulated extra-articular malunions underwent surgery using 3D-printed guides and the shim instrument. The plate position, drilling guide alignment, screw placements, and distal radius correction on postoperative CTs were compared with the surgical plans. Errors were measured using an anatomical coordinate system, and standard 2D radiographic measures were extracted. Preoperative dorsal tilt ranged from 16° to 35°, and postoperative volar tilt from 1° to 11°. 3D analysis revealed mean absolute correction errors of 6.1° in volar tilt, 1.6° in radial inclination, and 0.6 mm in ulnar variance. The volar tilt error due to the shim instrument, indicated by the mean angle error of the distal screws to the plate, was 2.1° but varied across the five patients. Settling of the distal radius, due to tension during and after reduction, further contributed to a mean loss of 3.5° in volar tilt. The shim instrument helped with securing plates at the intended angle; however, further correction improvements should consider the tension between the fragments of osteoporotic bone.

Finite element analysis of the effect of tibial osteotomy on the stress of polyethylene liner in total knee arthroplasty.

AIM: To explore the effects of tibial osteotomy varus angle combined with posterior tibial slope (PTS) on the stress of polyethylene liner in total knee arthroplasty (TKA) by building finite element model (FEM). METHODS: Established the FEM of standard TKA with tibial osteotomy varus angle 0° to 9° were established and divided into 10 groups. Next, each group was created 10 FEMs with 0° to 9° PTS separately. Calculated the stress on polyethylene liner in each group in Abaqus. Finally, the relevancy between tibial osteotomy angle and polyethylene liner stress was statistically analyzed using multiple regression analysis. RESULTS: As the varus angle increased, the area of maximum stress gradually shifted medially on the polyethylene liner. As the PTS increases, the percentage of surface contact forces on the medial and lateral compartmental of the polyethylene liner gradually converge to the same. When the varus angle is between 0° and 3°, the maximum stress of the medial compartmental surfaces of polyethylene liner rises smoothly with the increase of the PTS. When the varus angle is between 4° and 9°, as the increase of the PTS, the maximum stress of polyethylene liner rises first and then falls, forming a trough at PTS 5° and then rises again. Compared to the PTS, the varus angle has a large effect on the maximum stress of the polyethylene liner (p < .001). CONCLUSION: When the varus angle is 0° to 3°, PTS 0° is recommended, which will result in a more equalized stress distribution of the polyethylene liner in TKA.

Surgical Correction of Ischiopagus Tripus Conjoined Twins with Fused Pelvis: Enhancing Quality of Life through Orthopedic Intervention.

BACKGROUND The rarity of ischiopagus tripus conjoined twins complicates the surgical separation, owing to the lack of cases and high complexity. We aim to report our experience in performing orthopedic correction for ischiopagus tripus twins. CASE REPORT A pair of 3-year-old conjoined boys presented with a fused body at the pelvis region and only 1 umbilicus. There were 2 legs separated by shared genitalia and an anus at the midline, and 1 fused leg, which could be felt and moved by both of the patients. The twins also shared internal organs of the bladder, intestine, and rectum, as visualized through angiography computerized tomography scan. After several team discussions with the institutional review board, the hospital ethics committee, and both parents, it was agreed to perform disarticulation of the fused third limb, followed by correction of the trunk alignment by pelvic closed wedge osteotomy and internal fixation. We successfully reconstructed the pelvis using locking plates and additional 3.5-mm cortical screws and 1.2-mm stainless steel wire. CONCLUSIONS This report describes the presentation and surgical management of a case of ischiopagus tripus conjoined twins. It highlights the challenges involved in surgery and the importance of investigating these infants for other congenital abnormalities. Although surgical approaches for different sets of twins should be individually tailored, interventions aimed to provide optimal outcomes should consider ethical issues and parental/patient expectations. Even in situations in which the twins are inseparable, there is still room for surgical correction to be performed.

3D-Printed custom-made hemipelvic endoprosthetic reconstruction following periacetabular tumor resection: utilizing a novel classification system.

BACKGROUND: Customized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved osteointegration, long-term stability, and anatomical fit. However, the lack of an established classification system hampers implementation and progress. METHODS: We formulated a novel classification system based on pelvic defect morphology and 3D-printed hemipelvis endoprostheses. It integrates surgical approach, osteotomy guide plate and prosthesis design, postoperative rehabilitation plans, and perioperative processes. RESULTS: Retrospectively analyzing 60 patients (31 males, 29 females), we classified them into Type A (15 patients: Aa = 6, Ab = 9), Type B (27 patients: Ba = 15, Bb = 12), Type C (17 patients). All underwent customized osteotomy guide plate-assisted tumor resection and 3D-printed hemipelvic endoprosthesis reconstruction. Follow-up duration was median 36.5 ± 15.0 months (range, 6 to 74 months). The mean operating time was 430.0 ± 106.7 min, intraoperative blood loss 2018.3 ± 1305.6 ml, transfusion volume 2510.0 ± 1778.1 ml. Complications occurred in 13 patients (21.7%), including poor wound healing (10.0%), deep prosthesis infection (6.7%), hip dislocation (3.3%), screw fracture (1.7%), and interface loosening (1.7%). VAS score improved from 5.5 ± 1.4 to 1.7 ± 1.3, MSTS-93 score from 14.8 ± 2.5 to 23.0 ± 5.6. Implant osseointegration success rate was 98.5% (128/130), with one Type Ba patient experiencing distal prosthesis loosening. CONCLUSION: The West China classification may supplement the Enneking and Dunham classification, enhancing interdisciplinary communication and surgical outcomes. However, further validation and wider adoption are required to confirm clinical effectiveness.

A finite element model of human hindfoot and its application in supramalleolar osteotomy.

BACKGROUND: The majority of the ankle osteoarthritis cases are posttraumatic and affect younger patients with a longer projected life span. Hence, joint-preserving surgery, such as supramalleolar osteotomy becomes popular among young patients, especially those with asymmetric arthritis due to alignment deformities. However, there is a lack of biomechanical studies on postoperative evaluation of stress at ankle joints. We aimed to construct a verifiable finite element model of the human hindfoot, and to explore the effect of different osteotomy parameters on the treatment of varus ankle arthritis. METHODS: The bones of the hindfoot are reconstructed using normal CT tomography data from healthy volunteers, while the cartilages and ligaments are determined from the literature. The finite element calculation results are compared with the weight-bearing CT (WBCT) data to validate the model. By setting different model parameters, such as the osteotomy height (L) and the osteotomy distraction distance (h), the effects of different surgical parameters on the contact stress of the ankle joint surface are compared. FINDINGS: The alignment and the deformation of hindfoot bones as determined by the finite element analysis aligns closely with the data obtained from WBCT. The maximum contact stress of the ankle joint surface calculated by this model increases with the increase of the varus angle. The maximum contact stresses as a function of the L and h of the ankle joint surface are determined. INTERPRETATION: The relationship between surgical parameters and stress at the ankle joint in our study could further help guiding the planning of the supramalleolar osteotomy according to the varus/valgus alignment of the patients.

Determination of safety margin of nasal septum osteotomy for sphenoid sinus in cleft lip and palate patients.

BACKGROUND: Nasal septum osteotomy is used for separating the nasal septum and maxilla during a Le Fort I osteotomy. If this osteotomy is applied too high or is tilted into the nasal cavity, the sphenoid sinus and various adjacent vital structures may be damaged, and serious bleeding, neurological complications, blindness or even death may occur. The aim of this study is to determine the safety margin of the nasal septum osteotomy for sphenoid sinus during the Le Fort I surgery in cleft lip and palate (CLP) patients. METHODS: Twenty cleft lip and palate (the CLP group) and 20 healthy individuals (the control group) were included in this study. Three values (two lines and an angle) were measured by cone beam computed tomography (CBCT). The first line is the line passing through the junction of the spina nasalis anterior point and the lower point of the perpendicular lamina of the palatine bone. The undersired line is the line passing through the junction of the spina nasalis anterior point and the lower anterior border of the base of the sphenoid sinus. The osteotomy angle is the angle between these two lines. RESULTS: In the control group; a surgical line of 44.11-61.14 mm (mean 51.91 ± 4.32), an undesired line of 52.48-69.58 mm (mean 59.14 ± 5.08) and an angle of 18.22-27.270 (mean 22.66 ± 2.55) were found, while in the CLP group, a surgical line of 34.53-51.16 mm (mean 43.38 ± 4.79), an undesired line of 46.86-61.35 mm (mean 55.02 ± 3.24) and an angle of 17.60-28.810 (mean 22.60 ± 2.81) were found. CONCLUSIONS: Although the angle to the sphenoid sinus was not significantly affected by CLP, careful planning and consideration of these anatomical differences are crucial to prevent complications and ensure the safety of Le Fort I surgery in CLP patients. Further research with larger sample sizes and subgroup analysis of unilateral and bilateral CLP cases is needed to improve our understanding of these anatomical variations and improve surgical approaches to individuals with CLP undergoing orthognathic procedures.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial.

OBJECTIVE: To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (ß -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not. MATERIALS AND METHODS: Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication. RESULTS: 20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting. CONCLUSIONS: Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up. CLINICAL RELEVANCE: Clinically, OSFE with grafting materials provides no additional benefit. CLINICAL TRIAL REGISTRATION NUMBER: TCTR20210517008 (date of registration: May 17, 2021).

Optimizing Esthetic Outcomes and Bone Stability: Chin Advancement Through Inverted V Osteotomy.

Traditional horizontal osteotomies for small and short chins often yield suboptimal results due to limited bone advancement, resulting in deep labiomental folds and heightened bone resorption risks. This study investigates the effectiveness of an innovative inverted V-shaped osteotomy technique in enhancing esthetic outcomes for patients with such chin concerns. Thirty-eight patients who underwent inverted V-shaped osteotomy for recessed chins between January 2018 and June 2022 were included. Excluding cases involving simultaneous mandibular contouring surgery, patients were followed up for a median duration of 1.2±0.5 years. Preoperation and postoperation soft tissue pogonion (Pg') and labiomental fold depth (LMF) changes were measured. IBM SPSS (version 27.0) was used for statistical analysis, with significance defined as P <0.05. Patient satisfaction was assessed using a visual analog scale. Successful advancement genioplasty was performed on all patients without any severe complications. The average change in soft tissue pogonion (Pg') measured 6.2 (1.9) mm, and the mean alteration in labiomental depth was 0.42 (0.4) mm. The procedure achieved a bone to soft tissue movement ratio of 1:0.96. Patient satisfaction was notably high, with a mean VAS score of 8.7. An inverted V-shaped osteotomy enables greater bone advancement for small and short chins, leading to improved esthetic outcomes and offering a mechanically advantageous condition for bone segments.

Contemporary Surgical Management of Craniofacial Fibrous Dysplasia Using Computer-Assisted Surgery and Intraoperative Navigation.

Craniofacial fibrous dysplasia (CFD) is a rare developmental disease of bone, which typically presents as a painless, expansile mass causing deformity of the craniofacial skeleton. In rare circumstances, compression of neurovascular structures may arise, causing symptoms such as pain, visual impairment, and hearing loss. Traditionally, CFD debulking has been performed with "freehand" techniques using preoperative imaging and anthropometric norms to determine the ideal amount of tissue removal. The advent of computer-assisted surgery, computer-aided design, and computer-aided manufacturing (CAD/CAM) has revolutionized the management of CFD. Surgeons can now fabricate patient-specific osteotomy/ostectomy guides, allowing for increased accuracy in bone removal and improved cosmetic outcomes. This series of 3 cases describe our institution's technique using patient-specific ostectomy "depth guides", which allow for maximum removal of fibro-osseous tissue while sparing deep and adjacent critical structures. These techniques can be widely applied to the craniofacial skeleton to assist in the surgical management of CFD.

Clinical Outcomes of Medial Meniscal Allograft Transplantation With or Without High Tibial Osteotomy: A Case-Control Study Up to 8 Years of Follow-up.

BACKGROUND: Satisfactory clinical results of meniscal allograft transplantation (MAT) have been reported in recent years. However, it remains unclear whether the clinical outcomes of MAT when combined with an osteotomy are inferior to those of isolated MAT. PURPOSE: To compare the survival rates and clinical outcomes of patients who received isolated medial MAT with those of patients undergoing medial MAT combined with high tibial osteotomy (HTO). STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A total of 55 patients underwent arthroscopic medial MAT using the soft tissue technique and HTO (mean age, 41.3 ± 10.4 years; 9 female); after fuzzy case-control matching on demographics, 55 controls who underwent isolated medial MAT were also included. Survival analyses were performed using the Kaplan-Meier method with surgical failure, clinical failure (Lysholm score, <65), and reoperation as endpoints. Subjective clinical scores were collected preoperatively and at the final follow-up. RESULTS: The mean follow-up time was 5.4 years, up to 8 years. All outcomes significantly improved at the last follow-up (P < .001). No differences were identified between MAT and MAT + HTO groups preoperatively and at the last follow-up (P > .05). At the final follow-up, 8 of 55 (14.5%) of the MAT + HTO patients and 9 of 55 (16.4%) of the MAT patients had a Lysholm score <65 (P = .885). Overall, 90% of the patients declared they would repeat the surgery regardless of the combined procedure. Surgical failure was identified in 6 of 110 (5.5%) patients: 5 of 55 (9.1%) in the MAT + HTO group and 1 of 55 (1.8%) in the MAT group (P = .093). Clinical failure was identified in 19 of 110 (17.3%) patients: 11 of 55 (20%) in the MAT + HTO group and 8 of 55 (14.5%) in the MAT group (P = .447). A significantly lower survivorship from surgical failure was identified in the MAT + HTO group (hazard ratio, 5.1; P = .049), while no differences in survivorship from reoperation and clinical failure were identified (P > .05). CONCLUSION: Patients undergoing medial MAT + HTO showed similar clinical results to patients undergoing isolated medial MAT at midterm follow-up, and thus a surgically addressed malalignment does not represent a contraindication for medial MAT. However, the need for a concomitant HTO is associated with a slightly higher failure rate over time.