Redox Properties of Bacillus subtilis Ferredoxin:NADP+ Oxidoreductase: Potentiometric Characteristics and Reactions with Pro-Oxidant Xenobiotics.

Bacillus subtilis ferredoxin:NADP+ oxidoreductase (BsFNR) is a thioredoxin reductase-type FNR whose redox properties and reactivity with nonphysiological electron acceptors have been scarcely characterized. On the basis of redox reactions with 3-acetylpyridine adenine dinucleotide phosphate, the two-electron reduction midpoint potential of the flavin adenine dinucleotide (FAD) cofactor was estimated to be -0.240 V. Photoreduction using 5-deazaflavin mononucleotide (5-deazaFMN) as a photosensitizer revealed that the difference in the redox potentials between the first and second single-electron transfer steps was 0.024 V. We examined the mechanisms of the reduction of several different groups of non-physiological electron acceptors catalyzed by BsFNR. The reactivity of quinones and aromatic N-oxides toward BsFNR increased when increasing their single-electron reduction midpoint redox potentials. The reactivity of nitroaromatic compounds was lower due to their lower electron self-exchange rate, but it exhibited the same trend. A mixed single- and two-electron reduction reaction was characteristic of quinones, whereas reactions involving nitroaromatics proceeded exclusively via the one-electron reduction reaction. The oxidation of FADH• to FAD is the rate-limiting step during the oxidation of fully reduced FAD. The calculated electron transfer distances in the reaction with nitroaromatics were close to those of other FNRs including the plant-type enzymes, thus demonstrating their similar active site accessibility to low-molecular-weight oxidants despite the fundamental differences in their structures.

From rust to robust disinfectants: How do iron oxides and inorganic oxidants synergize with UVA light towards bacterial inactivation?

Pathogens in drinking water remain a challenge for human health, photo-Fenton process is a promising technique for pathogen inactivation, herein, two common iron oxides, hematite and magnetite mediate persulfate (peroxymonosulfate-PMS - and peroxydisulfate-PDS) involved photo-Fenton-like processes were constructed for E. coli inactivation, and the inactivation performance was investigated and compared with the photo-Fenton process under a low intensity UVA irradiation. Results indicated that with a low dose of iron oxides (1 mg/L) and inorganic peroxides (10 mg/L), PMS-involved photo-Fenton-like process is the best substitute for the photo-Fenton one over pH range of 5-8. In addition, humic acid (HA, one of the important components of natural organic matter) incorporated iron oxide-mediated photo-Fenton-like processes for bacteria inactivation was also studied, and facilitating effect was found in UVA/hematite/PMS and UVA/magnetite/PDS systems. Reactive oxygen species (ROS) exploration experiments revealed that ·OH was the predominant radical in H2O2- and PDS-containing systems, whereas 1O2 was one of the principal reactive species in the PMS systems. In addition to the semiconductor photocatalysis of iron oxides and UVA-activated oxidants, iron-complexes (iron-oxidant complexes and iron-bacteria complexes) mediated ligand-to-metal charge transfer (LMCT) processes also made contribution to bacterial inactivation. Overall, this study demonstrates that it is feasible to replace H2O2 with PMS in a photo-Fenton-like process for water disinfection using a low dose of reagents, mediated by cheap catalysts, such as hematite and magnetite, it is also hoped to provide some insights to practical water treatment.

Effects of different oxidants on the behaviour of microplastic hetero-aggregates.

Microplastic hetero-aggregates are stable forms of microplastics in the aqueous environment. However, when disinfecting water containing microplastic hetero-aggregates, the response of them in water to different oxidizing agents and the effect on water quality have not been reported. Our results showed that Ca(ClO)2, K2S2O8, and sodium percarbonate (SPC) treatment could lead to the disaggregation of microplastic hetero-aggregates as well as a rise in cell membrane permeability, which caused a large amount of organic matter to be released. When the amount of oxidant dosing is insufficient, the oxidant cannot completely degrade the released organic matter, resulting in DOC, DTN, DTP and other indicators being higher than before oxidation, thus causing secondary pollution of the water body. In comparison, K2FeO4 can purify the water body stably without destroying the microplastic hetero-aggregates, but it only weakly inhibits the toxic cyanobacteria Microcystis and Pseudanabaena, which may cause cyanobacterial bloom as well as algal toxin and odorant contamination in practical application. Compared with the other oxidizers, K2S2O8 provides better inhibition of toxic cyanobacteria and has better ecological safety. Therefore, when treating microplastic-containing water bodies, we should consider both water purification and ecological safety, and select appropriate oxidant types and dosages to optimize the water treatment.

Copper-catalysed dehydrogenation or lactonization of C(sp3)-H bonds.

Cytochrome P450 enzymes are known to catalyse bimodal oxidation of aliphatic acids via radical intermediates, which partition between pathways of hydroxylation and desaturation1,2. Developing analogous catalytic systems for remote C-H functionalization remains a significant challenge3-5. Here, we report the development of Cu(I)-catalysed bimodal dehydrogenation/lactonization reactions of synthetically common N-methoxyamides through radical abstractions of the γ-aliphatic C-H bonds. The feasibility of switching from dehydrogenation to lactonization is also demonstrated by altering reaction conditions. The use of a readily available amide as both radical precursor and internal oxidant allows for the development of redox-neutral C-H functionalization reactions with methanol as the sole side product. These C-H functionalization reactions using a Cu(I) catalyst with loading as low as 0.5 mol.% is applied to the diversification of a wide range of aliphatic acids including drug molecules and natural products. The exceptional compatibility of this catalytic system with a wide range of oxidatively sensitive functionality demonstrates the unique advantage of using a simple amide substrate as a mild internal oxidant.

UV light and Fe2+ catalysed COD removal of AO 8 using NaOCl as oxidant.

The present study aims to establish NaOCl as a potential oxidant in the COD removal of Acid Orange 8 using UVC light (λ = 254 nm) and Fe2+ as catalysts. The different systems used in this study are NaOCl, Fe2+/NaOCl, UV/NaOCl, and Fe2+/NaOCl/UV. All these process were found to be operative in acidic, neutral and basic medium. The initial decolorisation and COD removal efficiency (CODeff) for different systems follow the order: Fe2+/NaOCl/UV > UV/NaOCl > Fe2+/NaOCl > NaOCl. Nevertheless, NaOCl can alone be used in the treatment process considering its CODeff to the extent of 95% in 90 min. The change in pH of the solutions after treatment is an important observation - for non-UV systems it remained around 11.0 and 7.0 in other systems. Thus, UV systems are environmental benign. The effect of various anions on CODeff was tested in Fe2+ systems. Presence of F- ions were found to accelerate CODeff in both the systems. However, the effect is more pronounced in Fe2+/ NaOCl/UV, where complete CODeff was observed in the presence of 9.0 gl-1 of F-. The COD removal kinetics for all systems was studied using zero-order, first-order, second-order, and BMG kinetic models. BMG model was found to be more suitable among all and is in good agreement with CODeff of all systems. It is, therefore, established that NaOCl can serve as a powerful oxidant in the advanced oxidation process.

Oxidation processes and me.

This publication summarizes my journey in the field of chemical oxidation processes for water treatment over the last 30+ years. Initially, the efficiency of the application of chemical oxidants for micropollutant abatement was assessed by the abatement of the target compounds only. This is controlled by reaction kinetics and therefore, second-order rate constant for these reactions are the pre-requisite to assess the efficiency and feasibility of such processes. Due to the tremendous efforts in this area, we currently have a good experimental data base for second-order rate constants for many chemical oxidants, including radicals. Based on this, predictions can be made for compounds without experimental data with Quantitative Structure Activity Relationships with Hammet/Taft constants or energies of highest occupied molecular orbitals from quantum chemical computations. Chemical oxidation in water treatment has to be economically feasible and therefore, the extent of transformation of micropollutants is often limited and mineralization of target compounds cannot be achieved under realistic conditions. The formation of transformation products from the reactions of the target compounds with chemical oxidants is inherent to oxidation processes and the following questions have evolved over the years: Are the formed transformation products biologically less active than the target compounds? Is there a new toxicity associated with transformation products? Are transformation products more biodegradable than the corresponding target compounds? In addition to the positive effects on water quality related to abatement of micropollutants, chemical oxidants react mainly with water matrix components such as the dissolved organic matter (DOM), bromide and iodide. As a matter of fact, the fraction of oxidants consumed by the DOM is typically > 99%, which makes such processes inherently inefficient. The consequences are loss of oxidation capacity and the formation of organic and inorganic disinfection byproducts also involving bromide and iodide, which can be oxidized to reactive bromine and iodine with their ensuing reactions with DOM. Overall, it has turned out in the last three decades, that chemical oxidation processes are complex to understand and to manage. However, the tremendous research efforts have led to a good understanding of the underlying processes and allow a widespread and optimized application of such processes in water treatment practice such as drinking water, municipal and industrial wastewater and water reuse systems.

Origins of Selective Oxidation in Carbon-Based Nonradical Oxidation Processes toward Organic Pollutants: Quantitative Structure-Activity Relationships (QSARs).

Metal-free carbon material-mediated nonradical oxidation processes (C-NOPs) have emerged as a research hotspot due to their excellent performance in selectively eliminating organic pollutants in aqueous environments. However, the selective oxidation mechanisms of C-NOPs remain obscure due to the diversity of organic pollutants and nonradical active species. Herein, quantitative structure-activity relationship (QSAR) models were employed to unveil the origins of C-NOP selectivity toward organic pollutants in different oxidant systems. QSAR analysis based on adsorption and oxidation descriptors revealed that C-NOP selectivity depends on the oxidation potentials of organic pollutants rather than on adsorption interactions. However, the dominance of electronic effects in selective oxidation decreases with increasing structural complexity of organic pollutants. Moreover, the oxidation threshold solely depends on the inherent electronic nature of organic pollutants and not on the reactivity of nonradical active species. Notably, the accuracy of substituent descriptors (Hammett constants) and theoretical descriptors (e.g., highest occupied molecular orbital energy, ionization potential, and single-electron oxidation potential) is significantly influenced by the complexity and molecular state of organic pollutants. Overall, the study findings reveal the origins of organic pollutant-oriented selective oxidation and provide insight into the application of descriptors in QSAR analysis.

Degradation of triclosan by peroxydisulfate/peroxomonosulfate binary oxidants activation under thermal conditions: Efficiency and mechanism.

Peroxydisulfate (PDS) and peroxymonosulfate (PMS) could be efficiently activated by heat to generate reactive oxygen species (ROS) for the degradation of organic contaminants. However, defects including the inefficiency treatment and pH dependence of monooxidant process are prominent. In this study, synergy of heat and the PDS-PMS binary oxidant was studied for efficient triclosan (TCS) degradation and apply in rubber wastewater. Under different pH values, the degradation of TCS followed pseudo-first-order kinetics, the reaction rate constant (kobs) value of TCS in heat/PDS/PMS system increased from 1.8 to 4.4 fold and 6.8-49.1 fold when compared to heat/PDS system and heat/PMS system, respectively. Hydroxyl radicals (·OH), sulfate radicals (SO4·-) and singlet oxygen (1O2) were the major ROS for the degradation of TCS in heat/PDS/PMS system. In addition, the steady-state concentrations of ·OH/1O2 and SO4·-/·OH/1O2 increased under acidic conditions and alkaline conditions, respectively. It was concluded that the pH regulated the ROS for degradation of TCS in heat/PDS/PMS system significantly. Based on the analysis of degradation byproducts, it was inferred that the dechlorination, hydroxylation and ether bond breaking reactions occurred during the degradation of TCS. Moreover, the biological toxicity of the ten byproducts was lower than that of TCS was determined. Furthermore, the heat/PDS/PMS system is resistant to the influence of water substrates and can effectively improve the water quality of rubber wastewater. This study provides a novel perspective for efficient degradation of TCS independent of pH in the heat/PDS/PMS system and its application of rubber wastewater.

Ozone, hydrogen peroxide, and peroxymonosulfate disinfection of MS2 coliphage in water.

The control of viruses in water is critical to preventing the spread of infectious viral diseases. Many oxidants can inactivate viruses, and this study aims to systematically compare the disinfection effects of ozone (O3), peroxymonosulfate (PMS), and hydrogen peroxide (H2O2) on MS2 coliphage. The effects of oxidant dose and contact time on disinfection were explored, as were the disinfection effects of three oxidizing agents in secondary effluent. The 4-log inactivation of MS2 coliphage required 0.05 mM O3, 0.5 mM PMS, or 25 mM H2O2 with a contact time of 30 min. All three oxidants achieved at least 4-log disinfection within 30 min, and O3 required only 0.5 min. In secondary effluent, all three oxidants also achieved 4-log inactivation of MS2 coliphage. Excitation-emission matrix (EEM) results indicate that all three oxidants removed dissolved organic matter synchronously and O3 oxidized dissolved organic matter more thoroughly while maintaining disinfection efficacy. Considering the criteria of oxidant dose, contact time, and disinfection efficacy in secondary effluent, O3 is the best choice for MS2 coliphage disinfection among the three oxidants.

Influence of pesticide mixture on their heterogeneous atmospheric degradation by ozone and OH radicals.

Pesticides in the atmosphere can exist in both gaseous and particulate phases due to their semi-volatile properties. They can undergo degradation when exposed to atmospheric oxidants like ozone and hydroxyl radicals. The majority of studies on the atmospheric reactivity of pesticides study them in combination, without considering potential mixture effects that could induce uncertainties in the results. Therefore, this study aims to address this gap, through laboratory studies using a flow reactor, and by evaluating the degradation kinetics of pendimethalin mixed with folpet, tebuconazole, and S-metolachlor, which were simultaneously adsorbed on hydrophobic silica particles that mimic atmospheric aerosols. The comparison with other mixtures, including pendimethalin, from the literature has shown similar reactivity with ozone and hydroxyl radicals, indicating that the degradation kinetics of pesticides is independent of the mixture. Moreover, the degradation rates of the four pesticides under study indicate that they are not or slightly degraded by ozone, with half-lives ranging from 29 days to over 800 days. In contrast, when exposed to hydroxyl radicals, tebuconazole exhibited the fastest reactivity, with a half-life of 4 days, while pendimethalin had a half-life of 17 days.

Comparison of photoinduced and electrochemically induced degradation of venlafaxine.

The European Union requires environmental monitoring of the antidepressant drug venlafaxine. Advanced oxidation processes provide a remedy against the spread of micropollutants. In this study, the photoinduced and electrochemical decompositions of venlafaxine were investigated in terms of mechanism and efficacy using high-performance liquid chromatography coupled to high-resolution multifragmentation mass spectrometry. Kinetic analysis, structure elucidation, matrix variation, and radical scavenging indicated the dominance of a hydroxyl-mediated indirect mechanism during photodegradation and hydroxyl and direct electrochemical oxidation for electrochemical degradation. Oxidants, sulfate, and chloride ions acted as accelerants, which reduced venlafaxine half-lives from 62 to 25 min. Humic acid decelerated degradation during ultra-violet irradiation up to 50%, but accelerated during electrochemical oxidation up to 56%. In silico quantitative structure activity relationship analysis predicted decreased environmental hazard after advanced oxidation process treatment. In general, photoirradiation proved more efficient due to faster decomposition and slightly less toxic transformation products. Yet, matrix effects would have to be carefully evaluated when potential applications as a fourth purification stage were to be considered.

Effects of water quality on bacterial inactivation by ferrate(VI).

Ferrate (Fe(VI)) is an emerging green oxidant which has great potential and prospect in water disinfection. However, the effects of water quality on Fe(VI) disinfection remain unclear. This study systematically investigated the effects of pH, organic matters and inorganic ions on Fe(VI) inactivation of Escherichia coli (E. coli). Results showed that pH was the dominant influencing factor and the inactivation efficiency as well as inactivation rate constant was negatively correlated with pH (6.8-8.4). HFeO4- was found to be the critical Fe(VI) species contributing to the inactivation. As for organic matters (0-5 mg C/L), protein and humic acid significantly accelerated the decay of Fe(VI) and had negative effects on the inactivation efficiency, while polysaccharide slightly inhibited the inactivation due to the low reactivity with Fe(VI). As for inorganic ions, bicarbonate (0-2 mM) could stabilize Fe(VI) and decreased the inactivation rate constant, while ammonium (0-1 mM) had little effect on the inactivation of E. coli. In addition, the comprehensive effects of water quality on Fe(VI) disinfection in actual reclaimed water were also evaluated. The inactivation of E. coli in secondary effluent and denitrifying effluent was found to be inhibited compared to that in phosphate buffer. Overall, this study is believed to provide valuable information on Fe(VI) disinfection for water and wastewater treatment practices.

Integrated Fenton-like and ozonation based advanced oxidation processes for treatment of real-time textile effluent containing azo reactive dyes.

The treatment of real-time textile effluent, collected from the Common Effluent Treatment Plant (CETP) of Kerala Industrial Infrastructure Development Corporation (KINFRA) at Kannur (District), Kerala (State), India, have been studied by utilizing the Fenton-like and ozone (O3) based advanced oxidation processes (AOPs). The Fenton-like AOP has been conducted as the pre-treatment of textile effluent involving the activation of persulfate (PS) and hydrogen peroxide (H2O2) as a single and the mixed oxidants by using the Flyash (FA)-Pd composite particles as the activator. The maximum chemical oxygen demand (COD) removal of 84% has been observed for a stand-alone O3 based treatment at an O3 flow rate of 5-6 g h-1. By conducting the pre-treatment of textile effluent with the PS, H2O2, and mixed oxidants (PS and H2O2) based Fenton-like AOPs, the COD removal after an O3 based post-treatment has been observed to be 83, 87, and 93% respectively at an O3 flow rate of 2, 3, and 5 g h-1. Hence, the Fenton-like pre-treatment involving the activation of mixed oxidants has been determined to be the best method for the highest COD removal of real-time textile effluent. The optimum values of initial oxidant-ratio (initial [H2O2]:initial [PS]), initial oxidant-dosage, and ozonation time, for the mixed oxidants based Fenton-like pre-treatment, have been determined to be 3 wt% mM-1, 6:2 wt% mM-1, and 60 min respectively. Under the most optimum conditions, the COD removal has been attributed to the combination of O2•- (for the pre-treatment) and •OOH (for the post-treatment) which possess relatively lower oxidation potential values.

The synergistic effect of oxidant-peroxide coupling systems for water and wastewater treatments.

With the growing complexity and severity of water pollution, it has become increasingly challenging to effectively remove contaminants or inactivate microorganisms just by traditional chemical oxidants such as O3, chlorine, Fe(VI) and Mn(VII). Up till now, numerous studies have indicated that these oxidants in combination with peroxides (i.e., hydrogen peroxide (H2O2), peroxymonosulfate (PMS), peracetic acid (PAA) and periodate (PI)) exhibited excellent synergistic oxidation. This paper provided a comprehensive review on the combination of aforementioned oxidant-peroxide applied in water and wastewater treatments. From one aspect, the paper thoroughly elucidated the synergy mechanism of each oxidant-peroxide combination in turn. Among these combinations, H2O2 or PMS generally performed as the activator of four traditional oxidants above to accelerate reactive species generation and therein various reaction mechanisms, including electron transfer, O atom abstraction and oxo ligand substitution, were involved. In addition, although neither PAA nor PI was able to directly activate Fe(VI) and Mn(VII), they could act as the stabilizer of intermediate reactive iron/manganese species to improve the latter utilization efficiency. From another aspect, this paper summarized the influence of water quality parameters, such as pH, inorganic ions and natural organic matter (NOM), on the oxidation performance of most combined systems. Finally, this paper highlighted knowledge gaps and identified areas that require further research.

From Theory to Practice: Leveraging Chemical Principles To Improve the Performance of Peroxydisulfate-Based In Situ Chemical Oxidation of Organic Contaminants.

In situ chemical oxidation (ISCO) using peroxydisulfate has become more popular in the remediation of soils and shallow groundwater contaminated with organic chemicals. Researchers have studied the chemistry of peroxydisulfate and the oxidative species produced upon its decomposition (i.e., sulfate radical and hydroxyl radical) for over five decades, describing reaction kinetics, mechanisms, and product formation in great detail. However, if this information is to be useful to practitioners seeking to optimize the use of peroxydisulfate in the remediation of hazardous waste sites, the relevant conditions of high oxidant concentrations and the presence of minerals and solutes that affect radical chain reactions must be considered. The objectives of this Review are to provide insights into the chemistry of peroxydisulfate-based ISCO that can enable more efficient operation of these systems and to identify research needed to improve understanding of system performance. By gaining a deeper understanding of the underlying chemistry of these complex systems, it may be possible to improve the design and operation of peroxydisulfate-based ISCO remediation systems.

[Remediation of Three Oxidants on Polycyclic Aromatic Hydrocarbons in Coking Contaminated Soil and Its Response to Indigenous Microorganisms].

To explore the influences of chemical oxidation on the physiological and ecological functions of indigenous microorganisms during contaminated soil remediation, three oxidants, including KMnO4, Na2S2O8, and O3, were selected to investigate their remediation effects on PAHs and the responses to indigenous microorganisms under different liquid-solid ratios, in this study. The results showed that:when the ΣPAHs concentration was 679.1 mg·kg-1 and the dosage of KMnO4 and Na2S2O8 was 1%, the removal efficiency of ΣPAHs reached up to 96.9% and 95.7% under the liquid-solid ratio of 6:1; for the O3 treatment, the removal efficiency of ΣPAHs was the highest(82.3%) at the O3 dosage and the liquid-solid ratio of 72 mg·min-1 and 8:1, respectively. The removal efficiency of low ring(3-4 rings) PAHs was higher than that of high ring(5-6 rings) PAHs under different liquid-solid ratios. The highest removal efficiencies were observed for phenanthrene and acenaphthene, whereas for benzo[a]pyrene, only the KMnO4treatment provided an effective performance, showing the highest removal efficiency of 97.4%. The microbial quantity analysis indicated that the quantity of soil microorganisms in the soil dropped sharply after being treated with KMnO4, decreasing from 108 copies·g-1 to 105 copies·g-1, whereas it changed only slightly after being treated with Na2S2O8 and O3. The community structure analysis showed that Proteobacteria were predominant in the contaminated soil, with the relative abundance of 99.5%. The addition of KMnO4 and Na2S2O8 significantly increased the microbial diversity; in particular, the relative abundance of a variety of microorganisms(such as Ralstonia and Acinetobacter) that can degrade PAHs was remarkably increased. The analysis of microbial metabolic function pathways revealed that chemical oxidation could simultaneously increase the relative abundance of PAHs-degrading bacteria and improve the ability of organic metabolism. Overall, the KMnO4 treatment greatly altered the quantity of microorganisms and the structure of the microbial community and the relative abundance of PAHs-degrading microorganisms at the liquid-solid ratio of 6:1.

Dioxygen Reduction and Bioinspired Oxidations by Non-heme Iron(II)-α-Hydroxy Acid Complexes.

ConspectusAerobic organisms involve dioxygen-activating iron enzymes to perform various metabolically relevant chemical transformations. Among these enzymes, mononuclear non-heme iron enzymes reductively activate dioxygen to catalyze diverse biological oxidations, including oxygenation of C-H and C═C bonds and C-C bond cleavage with amazing selectivity. Several non-heme enzymes utilize organic cofactors as electron sources for dioxygen reduction, leading to the generation of iron-oxygen intermediates that act as active oxidants in the catalytic cycle. These unique enzymatic reactions influence the design of small molecule synthetic compounds to emulate enzyme functions and to develop bioinspired catalysts for performing selective oxidation of organic substrates with dioxygen. Selective electron transfer during dioxygen reduction on iron centers of synthetic models by a sacrificial reductant requires appropriate design strategies. Taking lessons from the role of enzyme-cofactor complexes in the selective electron transfer process, our group utilized ternary iron(II)-α-hydroxy acid complexes supported by polydentate ligands for dioxygen reduction and bioinspired oxidations. This Account focuses on the role of coordinated sacrificial reductants in the selective electron transfer for dioxygen reduction by iron complexes and highlights the versatility of iron(II)-α-hydroxy acid complexes in affecting dioxygen-dependent oxidation/oxygenation reactions. The iron(II)-coordinated α-hydroxy acid anions undergo two-electron oxidative decarboxylation concomitant with the generation of reactive iron-oxygen oxidants. A nucleophilic iron(II)-hydroperoxo species was intercepted in the decarboxylation pathway. In the presence of a Lewis acid, the O-O bond of the nucleophilic oxidant is heterolytically cleaved to generate an electrophilic iron(IV)-oxo-hydroxo oxidant. Most importantly, the oxidants generated with or without Lewis acid can carry out cis-dihydroxylation of alkenes. Furthermore, the electrophilic iron-oxygen oxidant selectively hydroxylates strong C-H bonds. Another electrophilic iron(IV)-oxo oxidant, generated from the iron(II)-α-hydroxy acid complexes in the presence of a protic acid, carries out C-H bond halogenation by using a halide anion.Thus, different metal-oxygen intermediates could be generated from dioxygen using a single reductant, and the reactivity of the ternary complexes can be tuned using external additives (Lewis/protic acid). The catalytic potential of the iron(II)-α-hydroxy complexes in performing O2-dependent oxygenations has been demonstrated. Different factors that govern the reactivity of iron-oxygen oxidants from ternary iron(II) complexes are presented. The versatile reactivity of the oxidants provides useful insights into developing catalytic methods for the selective incorporation of oxidized functionalities under environmentally benign conditions using aerial oxygen as the terminal oxidant.

The ferryl generation by fenton reaction driven by catechol.

The Fenton and Fenton-like reactions are based on the decomposition of hydrogen peroxide catalyzed by Fe(II), primarily producing highly oxidizing hydroxyl radicals (HO∙). While HO∙ is the main oxidizing species in these reactions, Fe(IV) (FeO2+) generation has been reported as one of the primary oxidants. FeO2+ has a longer lifetime than HO∙ and can remove two electrons from a substrate, making it a critical oxidant that may be more efficient than HO∙. It is widely accepted that the preferential generation of HO∙ or FeO2+ in the Fenton reaction depends on factors such as pH and Fe: H2O2 ratio. Reaction mechanisms have been proposed to generate FeO2+, which mainly depend on the radicals generated in the coordination sphere and the HO∙ radicals that diffuse out of the coordination sphere and react with Fe(III). As a result, some mechanisms are dependent on prior HO∙ radical production. Catechol-type ligands can induce and amplify the Fenton reaction by increasing the generation of oxidizing species. Previous studies have focused on the generation of HO∙ radicals in these systems, whereas this study investigates the generation of FeO2+ (using xylidine as a selective substrate). The findings revealed that FeO2+ production is increased compared to the classical Fenton reaction and that FeO2+ generation is mainly due to the reactivity of Fe(III) with HO∙ from outside the coordination sphere. It is proposed that the inhibition of FeO2+ generation via HO∙ generated from inside the coordination sphere is caused by the preferential reaction of HO∙ with semiquinone in the coordination sphere, favoring the formation of quinone and Fe(III) and inhibiting the generation of FeO2+ through this pathway.

Unveiling the treatment-driven secondary risks of pharmaceuticals: New lessons from calcium channel blocker transformation by multiple oxidants.

The worldwide detection of numerous pharmaceuticals and their transformation products (TPs) in different environmental matrices has gained considerable concern about their potential ecological hazards. Increasing evidence suggested that calcium channel blockers (CCBs) are ubiquitous pharmaceutical pollutants in natural waters. However, their TPs, reaction pathways, and secondary risks have been limitedly known during oxidative water treatment. This study systematically assessed the TP formation and transformation mechanisms of two typical CCBs (i.e., amlodipine, AML; verapamil, VER) oxidized by ferrate(VI), permanganate, and ozone, as well as the in silico prediction on the TPs' properties. The high-resolution mass spectrometer analysis suggested a total of 16 TPs of AML and 8 TPs of VER identified for these reaction systems. Transformation of AML mainly proceeded through hydroxylation of the aromatic ring, ether bond cleavage, NH2 substitution by a hydroxyl group, and H-abstraction, while VER was oxidized via hydroxylation/opening of the aromatic ring and cleavage of the CN bond. Notably, certain TPs of both CCBs were estimated with low biodegradation, multi-endpoint toxicity, and high persistence and bioaccumulation, suggesting their severe risks to aquatic ecosystems. This study has implications for understanding the environmental behaviors, fate, and secondary risks of the globally prevalent and concerned CCBs under oxidative water treatment scenarios.

Selective Hydroxylation of C(sp3 )-H Bonds in Steroids.

Steroids are highly prevalent structures in small-molecule therapeutics, with the level of oxidation being key to their biological activity and physicochemical properties. These C(sp3 )-rich tetracycles contain many stereocentres, which are important for creating specific vectors and protein binding orientations. Therefore, the ability to hydroxylate steroids with a high degree of regio-, chemo- and stereoselectivity is essential for researchers working in this field. This review will cover three main methods for the hydroxylation of steroidal C(sp3 )-H bonds: biocatalysis, metal-catalysed C-H hydroxylation and organic oxidants, such as dioxiranes and oxaziridines.