Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Ultrasonic mapping of midpalatal suture - An ex-vivo study.

OBJECTIVE: Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency. METHODS: An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT. RESULTS: The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively. CONCLUSIONS: It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound. CLINICAL SIGNIFICANCE: This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

A morphometric approach to morphology analysis of palatal rugae in sibling groups.

Recent advances in imaging technologies, such as intra-oral surface scanning, have rapidly generated large datasets of high-resolution three-dimensional (3D) sample reconstructions. These datasets contain a wealth of phenotypic information that can provide an understanding of morphological variation and evolution. The geometric morphometric method (GMM) with landmarks and the development of sliding and surface semilandmark techniques has greatly enhanced the quantification of shape. This study aimed to determine whether there are significant differences in 3D palatal rugae shape between siblings. Digital casts representing 25 pairs of full siblings from each group, male-male (MM), female-female (FF), and female-male (FM), were digitized and transferred to a GM system. The palatal rugae were determined, quantified, and visualized using GMM computational tools with MorphoJ software (University of Manchester). Principal component analysis (PCA) and canonical variates analysis (CVA) were employed to analyze palatal rugae shape variability and distinguish between sibling groups based on shape. Additionally, regression analysis examined the potential impact of shape on palatal rugae. The study revealed that the palatal rugae shape covered the first nine of the PCA by 71.3%. In addition, the size of the palatal rugae has a negligible impact on its shape. Whilst palatal rugae are known for their individuality, it is noteworthy that three palatal rugae (right first, right second, and left third) can differentiate sibling groups, which may be attributed to genetics. Therefore, it is suggested that palatal rugae morphology can serve as forensic identification for siblings.

Morphology of the greater palatine foramen: a clinical point of view.

PURPOSE: Anatomical characteristics of the greater palatine foramen (GPF) are essential during the greater palatine nerve block application to anesthetize maxillary teeth, gums, midface, and nasal cavities. The position of GPF is usually described in relation to adjacent anatomical structures. This investigation aims to examine the morphometric relationships of GPF and closely determine its position. METHODS: The study included 87 skulls (174 foramina). They were photographed in a horizontal position with bases facing up. The digital data were processed in the ImageJ 1.53n software. RESULTS: The average distance of the GPF from the median palatine suture was 15.94 mm. In relation to the posterior border of the bony palate, the distance was 2.05 mm. Statistical significance was found in comparing the angle between the GPF, incisive fossa, and the median palatine suture between the sides of the skulls (p = 0.02). Comparing tested parameters between males and females showed significant differences in GPF-MPS (p = 0.003) and GPF-pb (p = 0.012), with lower values in females. The most significant percentage of skulls (77.01%) had the GPF located at the level of the third molar. The most significant number of bony palates had one lesser opening (60.91%) on the left side. CONCLUSION: GPF is located at the level of the maxillary third molar in most of the examined palates. Knowledge of the anatomical position of the greater palatine foramen and its variations is the basis for successfully implementing anesthesia and various surgical interventions.

Anatomy of the greater palatine foramen and canal and their clinical significance in relation to the greater palatine artery: a systematic review and meta-analysis.

PURPOSE: Accurate knowledge of greater palatine foramen (GPF) and greater palatine canal (GPC) anatomy is necessary to avoid injury to the greater palatine artery (GPA) when performing a variety of anesthesiologic, dental or surgical procedures. The aim of this paper was to perform a systematic review and meta-analysis of literature on the anatomy and localization of bony structures associated with the GPA, namely the GPF and GPC. METHODS: A systematic literature search was performed using PubMed, Embase, ScienceDirect, and Web of Science databases. Seventy-five studies were included in the meta-analysis (n = 22,202 subjects). RESULTS: The meta-analysis showed that the GPF is positioned 17.21 mm (95% CI = 16.34-18.09 mm) from the posterior nasal spine, 2.56 mm (95% CI = 1.90-3.22 mm) from the posterior border of the hard palate, 46.24 mm (95% CI = 44.30-48.18 mm) from the anterior nasal spine, 15.22 mm (95% CI = 15.00-15.43 mm) from the midline maxillary suture, 37.32 mm (95% CI = 36.19-38.45 mm) from the incisive foramen, and opposite the third maxillary molar (M3) in 64.9% (58.7-70.7%) of the total population. CONCLUSION: An up-to-date, comprehensive analysis of GPF and GPC clinical anatomy is presented. The results from this evidence-based anatomical study provides a unified set of data to aid clinicians in their practice.

Changing the topographical anatomy among the maxilla, palatine bone, and greater palatine nerve: a histological study using human fetuses.

PURPOSE: The palatine bone (PAL) rides over the maxilla (MX) without an end-to-end suture in the bony palate of fetuses. However, changes in the topographical relationship among bones was unknown at and along the pterygopalatomaxillary suture, including the palatine canals. METHODS: Using sagittal, frontal, and horizontal histological sections of the head from 15 midterm fetuses to 12 near-term fetuses, we depicted the changes in the topographical anatomy of the MX, PAL, and greater palatine nerve (GPN). RESULTS: In the bony greater palatine canal of these fetuses, the medial and posterior walls facing the GPN were consistently made up of the PAL. At midterm, the entire course of the GPN was embedded in the PAL (six fetuses), or the MX contributed to the lateral wall of the nerve canal (nine). At near-term, the anterior and lateral walls showed individual variations: an MX in the anterior and lateral walls (three fetuses), an anterior MX and a lateral PAL (five), an anterior PAL and a lateral MX (two), and a PAL surrounding the GPN (four). CONCLUSION: These increasing variations suggested that the pterygopalatomaxillary suture was actually growing and that the PAL transiently expanded anteriorly and/or laterally to push the MX in fetuses. The "usual" morphology in which the GPN is sandwiched by the MX and PAL is likely established after birth, possibly during adolescence. The driving force of this change may not be produced by the masticatory apparatus. Rather, it might be triggered by the growing maxillary sinus.

Morphometric analysis of the palatine triangle in adult human skulls: a potential aid for anthropologists and intraoral bone grafts.

Morphometrics of the hard palate is an important aspect of forensic anthropology and odontology. Palatine triangle is a triangular area in the hard palate formed by the palatine processes of the maxillae, which can aid intraoral bone grafts. We present the osteological measurements of the palatine triangle (maxillary palate) based on sex, compare it with other hard palate parameters, and establish the correlation between them. Seventy-seven male skulls and 36 female skulls were examined. Various morphometric measurements of the hard palate and palatine triangle were performed meticulously. Mean and standard deviation of each parameter were computed for groups using SPSS 16.0. Relationships between all parameters were analyzed using Pearson's rank correlation test. The mean palatine length was 38.84 ± 3.75 mm in males and 37.22 ± 4.12 mm in females; the mean palatine breadth was 31.36 ± 2.61 mm in males and 29.78 ± 3.07 mm in females. The mean area of the palatine triangle was 600.88 ± 80.16 mm2 in male skulls and 547.96 ± 94.28 mm2 in the female skulls. Statistically significant difference in various measurements of the palatine triangle and hard palate between the male and female skulls was noted. Leptostaphyline (narrow palate) was the most prominent type of palate. The area of the palatine triangle showed a strong positive correlation between the total length and breadth of the palate for both male and female skulls. A strong positive correlation was also observed between the palate length and the palatine triangle length. Palatine index and palate breadth had a statistically significant moderate linear relationship. The maxillary palate length, breadth, and area of the palatine triangle were higher in males when compared to females in South Indian origin skulls. Most of the skulls had a narrow palate. The results of this metric analysis of the palatine triangle may lead to a new concept of anatomical research into studying the hard palate, which can be used for sexual dimorphism.

Sex prediction by geometric morphometric analysis of the hard palate.

OBJECTIVE: The hard palate participates in the construction of the oral and nasal cavities and represents the bony barrier between them. Morphological differences of the hard palate are important for forensic medicine, anthropology, anatomy, as well as scientific branches dealing with the study of evolutionary development, populations differences. The aim of this study was to determine sexual dimorphism of hard palate on three-dimensional (3D) models of human skulls using geometric morphometry. MATERIALS AND METHODS: The research was conducted on 3D models of 209 human skulls from Bosnian population (139 male, 70 female). On the obtained 3D models, we marked landmarks on the palate using Landmark editor program. Using MorphoJ program we analyzed sex differences of shape and size on hard palate. RESULTS: The principal component analysis showed that the first two components (PC1 and PC2) described 55.503% of the total morphological variability of the hard palate. The results of the discriminant analysis showed predictive power for male with 66.91% accuracy and for female with 58.57% accuracy based on the shape and size of the hard palate. The influence of size of the hard palate on its shape was statistically significant (p<0.0001). The results of discriminant analysis based on shape of hard palate showed predictive power for male with 68.34% accuracy and for female with 64.29% accuracy. CONCLUSIONS: Sex differences of hard palate are statistically significant and can be used for sex determination in skeletal remains. The percentage of accuracy for determining sex based on the hard palate was higher for men in this study.

Correlation between the anatomical morphology of palatal rugae and sex / Correlación entre la morfología anatómica de las rugas palatinas y el sexo

SUMMARY: To investigate the correlation between the anatomical morphology of palatal rugae and sex. The study sample consisted of 120 students studying from Shanxi Medical University, of which 60 were females and 60 were males. The digital model of the palatal rugae was obtained by the 3 Shape TRIOS intraoral scanner. And the shapes of palatal rugae were recorded. Association between palatal rugae shape and sex were tested using Chi-square analysis. And logistic regression analysis (LRA) was carried out to calculate the accuracy of gender prediction using rugae shapes. There was a statistically significant difference between males and females in terms of the distribution of wavy and circular palate rugae. The use of logistic regression analysis obtained a sex predictive value of 65 % when all the rugae shapes were analyzed. Digital images of the palatal rugae morphology contribute to more accurate and convenient for data collection and transformation. It was found that rugae patterns can moderately identify the sex of the specific population when multivariate statistics such as LRA is applied. The palatal rugae morphology can be utilized as an assistant measure for sex identification.

RESUMEN: Investigar la correlación entre la morfología anatómica de las rugas palatinas y el sexo. En la muestra de este estudio se incluyeron 120 estudiantes de la Universidad Médica de Shanxi, (60 mujeres y 60 hombres). El modelo digital de las rugas palatinas se obtuvo mediante escáner intraoral 3 Shape TRIOS, y se registraron las formas de las rugas palatinas. La asociación entre la forma de las rugas palatinas y el sexo se evaluó mediante un análisis de Chi-cuadrado; para calcular la precisión de la predicción de sexo se llevó a cabo un análisis de regresión logística (ARL) Se observó una diferencia estadísticamente significativa entre hombres y mujeres en términos de la distribución de las rugas palatinas onduladas y circulares. El uso de análisis de regresión logística obtuvo un valor predictivo de sexo del 65 % cuando se analizaron todas las formas de las rugas. Las imágenes digitales de la morfología de las rugas palatinas contribuyen a una recopilación de datos más precisa. En este análisis se determinó que los patrones de rugas pueden identificar relativamente el sexo de una población específica, cuando se aplican estadísticas multivariadas como ARL. La morfología de las rugas palatinas se puede utilizar como medida de ayuda para la identificación de sexo.

The influence of facial types on the morphology and location of the greater palatine foramen: a CBCT study.

OBJECTIVE: This study aimed to assess the morphology and location of the great palatine foramen (GPF) of different facial types using cone beam computed tomography (CBCT) scans. METHODS: Sixty CBCT scans were divided into: brachyfacial (n = 20), dolichofacial (n = 20) and mesofacial (n = 20) using Ricketts' VERT index for the determination of cephalometric facial type and imported into ImageJ software. GPF shape was characterized as: round, elongated in the anteroposterior direction (EAP), or elongated in the latero-medial direction (ELM). The distances between the GPF and the palatine suture (PS), the center of the GPF and the center incisive foramen (IF), the GPF and the palatine alveolar ridge (PAR), right side GPF (GPFr) and left side (GPFl) GPFs; and the angles formed from the intersection of the GPF, IF and PS were assessed. The position of the GPF was evaluated in relation to the molars. RESULTS: GPFr and GPFl mean distances from PAR presented higher values for dolichofacial patients (p < 0.05). GPFr and GPFl location distally to the third molar (3 M) was higher for brachyfacial type, while their location distally to the second molar was higher for mesofacial and between the mesial and distal surfaces of the 3 M for dolichofacial (p < 0.05). CONCLUSIONS: The GPF was more distant from the PAR in the dolichofacial-type group. The location of the GPF in relation to the molars varied according to the facial type. However, the morphology of the GPF was similar in the three facial types, and the elongated in the anteroposterior direction morphology was more frequent.

Morphometric study of incisive, greater and lesser palatine foramina: a novel point of maxillary nerve block in a Thai population / Estudio morfométrico del foramen palatino incisivo, mayor y menor: un punto novedoso de bloqueo del nervio maxilar en una población tailandesa

SUMMARY: To study the morphometric location of the incisive, greater, and lesser palatine foramina for maxillary nerve block. Two hundred Thai dry skulls were randomly organized from the Forensic Osteology Research Center. The distances of the parameters were measured via Vernier caliper.: Thedistances from the incisive foramen to the incisive margin of the premaxilla were 10.93?2.42 mm in males and 10.98?2.06 mm in females. From the left side, the incisive foramen to the greater palatine foramen (GPF) was39.07?2.23mm in males and 38.57?2.41 mm in females, and from the right side were 39.81?2.37 mm in males and 38.62?2.53mm in females. From the left side, the incisive foramen to the lesser palatine foramen (LPF) was 43.16?2.23 mm in males and 41.84?2.42mm in females and from the right side were 42.93?2.14 mm in males and 41.76?2.61 mm in females. The GPF found at medial to the maxillary third molar were 94-95 % in males and 84 % in females. These findings suggest that the medial position to the third molar teeth be used as a landmark for a palatine nerve block in Thais. These findings will help dentists to perform local anesthetic procedures, especially the nasopalatine and greater palatine nerve blocks, more effectively.

RESUMEN: El objetivo de este trabajo fue estudiar la localización morfométrica de los forámenes palatinos incisivos, mayores y menores para el bloqueo del nervio maxilar. Se organizaron al azar doscientos cráneos secos tailandeses del Centro de Investigación de Osteología Forense. Las distancias de los parámetros se midieron mediante un calibre Vernier. Las distancias desde el foramen incisivo hasta el margen incisivo de la premaxila fueron 10,93 ? 2,42 mm en hombres y 10,98 ? 2,06 mm en mujeres. Desde el lado izquierdo, el foramen incisivo al foramen palatino mayor (FPM) fue de 39,07 ? 2,23 mm en los hombres y 38,57 ? 2,41 mm en las mujeres, y del lado derecho fue de 39,81 ? 2,37 mm en los hombres y 38,62 ? 2,53 mm en las mujeres. Del lado izquierdo, el foramen incisivo al foramen palatino menor (LPF) fue de 43,16 ? 2,23 mm en hombres y 41,84 ? 2,42 mm en mujeres y del lado derecho 42,93 ? 2,14 mm en hombres y 41,76 ? 2,61 mm en mujeres. El FPM encontrado medial al tercer molar maxilar fue 94-95 % en hombres y 84 % en mujeres. Estos hallazgos sugieren que la posición medial de los terceros molares se utilice como punto de referencia para un bloqueo del nervio palatino en individuos tailandeses. Estos hallazgos ayudarán, de manera más eficaz, a los dentistas a realizar procedimientos anestésicos locales, especialmente los bloqueos nasopalatinos y del nervio palatino mayor.

Genetic variants in bone morphogenetic proteins signaling pathway might be involved in palatal rugae phenotype in humans.

This study investigated, if genetic variants in BMP2, BMP4 and SMAD6 are associated with variations in the palatal rugae pattern in humans. Dental casts and genomic DNA from 75 patients were evaluated. Each patient was classified as follows: total amount of rugae; bilateral symmetry in the amount, length and shape of the palatal rugae; presence of secondary or fragmentary palatal rugae; presence of unifications; predominant shape; and predominant direction of the palatal rugae. The genetic variants in BMP2 (rs1005464 and rs235768), BMP4 (rs17563) and SMAD6 (rs2119261 and rs3934908) were genotyped. Genotype distribution was compared between palatal rugae patterns using the chi-square test (alpha = 0.05). The allele A was associated with the presence of secondary or fragmentary rugae for rs1005464 (OR = 2.5, 95%CI 1.1-6.3; p = 0.014). Secondary or fragmentary rugae were associated with the G allele in rs17563 (OR = 2.1, 95%CI 1.1-3.9; p = 0.017). rs17563 was also associated with rugae unification (p = 0.017 in the additive model). The predominant shape (wavy) was associated with rs2119261 (p = 0.023 in the additive model). The left-right symmetry of the length of primary rugae was associated with rs3934908 in the recessive model (OR = 3.6, 95%CI 1.2-11.7; p = 0.025). In conclusion, genetic variants in the BMP pathway impacted on palatal rugae pattern.

Diferencias morfométricas en el hueso palatino de la oveja (Ovis aries) y la cabra (Capra hircus) / Morphometric palatine differences between sheep (Ovis aries) and goat (Capra hircus)

RESUMEN: Un hueso craneal muy poco estudiado en anatomía veterinaria comparada es el palatino. En nuestro estudio, realizamos la comparación de este hueso entre la oveja (Ovis aries L., 1758) y la cabra (Capra hircus L., 1758), a partir de una muestra de 36 y 17 cráneos respectivamente, y utilizando métodos de morfometría geométrica. Se eligieron un total de 32 puntos (4 hitos y 28 semi-hitos) para analizar la lámina horizontal del hueso palatino. Se reflejaron diferencias estadísticamente significativas tanto para el tamaño como para la forma. En Capra se denota una clara expansión lateral del hueso y rostral y una contracción central, con un acercamiento relativo de los forámenes palatinos, mientras que en Ovis los forámenes están más lateralmente alejados. A nuestro parecer, esta mayor anchura y longitud de la lámina horizontal en Capra se explicaría por una mayor capacidad de frotación del alimento en relación a Ovis.

SUMMARY: Palatine is a cranial bone very less studied in comparative veterinary anatomy. In our study, we performed the comparison of this bone between sheep (Ovis aries L., 1758) and goat (Capra hircus L., 1758), from a sample of 36 and 17 skulls respectively, using methods of geometric morphology. A total of 32 points (4 landmarks and 28 semi-landmarks) were chosen to analyse the horizontal lamina of the palatine bone. Statistically significant differences were reflected for both size and shape. Capra denotes a clear lateral expansion of the bone and rostral and a central contraction, with a relative approach of palatine foramina, while in Ovis foramina are more laterally distant. In our view, this greater width of the horizontal lamina in Capra would be explained by a greater capacity to rub the food compared to Ovis.

Radiological evaluation of the bone and soft tissue thicknesses of the palate for using a miniscrew-supported maxillary skeletal expander.

PURPOSE: The purpose of this study was to determine the palatal bone and soft tissue thicknesses using a miniscrew-supported maxillary skeletal expander (MSE) in Class III malocclusion. METHODS: The thicknesses of the palatal bone and soft tissue were measured in cone-beam computed tomography images obtained from 58 patients. All 20 points were crossing points between five levels, which were defined at 3 mm intervals relative to the line connecting the central fossae of the first molar (Level 0), and 2 mm and 4 mm lateral to the anteroposterior reference line (AP line). RESULTS: The palatal bone was significantly thicker in males than females in the anterior palate up to Level 0, while there was no significant sex-related difference in the posterior palate. There was a tendency for the thickness to decrease in the posterior direction, except in females at 2 mm lateral to the AP line. The palatal soft tissue was significantly thicker in males than females in all positions. At 2 mm lateral to the AP line, the palatal soft tissue thickness decreased in the posterior direction. A 4 mm lateral to the AP line, it initially decreased in the posterior direction, and then increasing again at Level - 6 (6 mm posterior of Level 0). As the lateral distance from the AP line increased, the palatal bone thickness decreased while the palatal soft tissue thickness increased. CONCLUSIONS: These findings provide quantitative data on the palatal bone and soft tissue thicknesses for the miniscrew-supported MSE in the posterior palate.

Palatal rugae morphology is associated with variation in tooth number.

This observational study compared palatal rugae morphology in adolescent subjects with normal tooth number and tooth agenesis. Maxillary dental study casts were used to compare rugae number, length and shape. Each study group contained 60 subjects (30 females and 30 males) mean age 13.4 (SD, 1.55) in control and 13.56 (SD, 1.54) years in tooth agenesis groups (p = 0.576). Mean number of missing tooth units in the tooth agenesis group was 2.1. Mean number of primary rugae in the whole sample was 4.35 (SD, 0.98) on the right and 4.33 (SD, 0.92) on the left with no significant differences (p = 0.236 and p = 0.404, respectively). However, the number of secondary rugae on the left (p = 0.006) and fragmentary rugae on the right (p = 0.004) was significantly increased in the tooth agenesis group. The shape of left primary rugae 2 and 3 also differed between groups, tending towards a wavy pattern in the control group and curved in the tooth agenesis group (p = 0.012 and p = 0.004, respectively). In addition, primary rugae 3 was more convergent (p = 0.008) whilst left primary rugae 3 and 5 were orientated in an antero-posterior direction (p = 0.04 for both rugae) in the tooth agenesis group. Subgroup analysis also identified significant associations between patterns of tooth agenesis and rugae number, in addition to shape of primary rugae. The identification of significant differences in rugae pattern between subjects with normal tooth number and agenesis suggests potential commonality in signal pathway disruption during establishment of these structures.

Calculated decisions: Modified Mallampati classification.

The Modified Mallampati Classification stratifies predicted difficulty of endotracheal intubation based on anatomic features.

Navigation-Guided Measurement of the Inferior Limit Through the Endonasal Route to the Craniovertebral Junction.

BACKGROUND: The endoscopic endonasal approach (EEA) has been accepted as an alternative option for diseases at the craniovertebral junction. However, the inferior destination through the endoscopic endonasal approach is anatomically higher than that of the transoral approach. Therefore, preoperative assessment of accessibility is mandatory for appropriate selection of indication. Using a navigation system, we examined the inferior limit through the endonasal route and evaluated the relationships between surrounding anatomicl structures and the lowest point. METHODS: This study included patients who underwent endoscopic transsphenoidal surgery for intrasellar lesions at our hospital (N = 23). At the start of surgery, the lowest point (target point [TP]) was marked with a straight probe under guidance of the navigation system. We measured 4 parameters on preoperative computed tomography: nasal length, hard palate length, anterior-posterior diameter of the nasopharynx, and nasopalatine angle. Patients were classified into groups depending on whether the TP was at or above (group A) or below (group B) the hard palatine line. RESULTS: TPs were above the hard palatine line in 15 patients (group A) and below the hard palatine line in 8 patients (group B). No TPs reached the nasopalatine line. Nasal length (P = 0.03) and nasopalatine angle (P = 0.01) were larger in group B than in group A. There were no significant differences in anterior-posterior diameter of the nasopharynx or hard palate length. CONCLUSIONS: The hard palatine line is a reliable parameter for assessing the inferior limit of the endoscopic endonasal approach. Nostril size affects accessibility with surgical instruments.

Dimorfismo sexual a través del análisis morfométrico de bóvedas palatinas en una población peruana / Sexual Dimorphism Via Palatal Vault Morphometric Analysis on A Sample Peruvian Population

Resumen: Objetivo: Determinar la precisión del dimorfismo sexual a través del análisis morfométrico de bóvedas palatinas en cráneos procedentes del Laboratorio de Investigación Forense del Equipo Forense Especializado (EFE) de Ayacucho del Ministerio Público - Perú. Materiales y métodos: Diseño transversal, constituido con una muestra de 43 cráneos con sexo biológico preestablecido, (24=masculino y 19=femenino). La estimación del dimorfismo sexual se estableció a través del método propuesto por Meera Jacob y cols., basado en las mediciones de la longitud y ancho palatino, posteriormente se calculó el índice palatino, estableciéndose la precisión y exactitud del método. El análisis inferencial se realizó con un nivel de significancia del 5% a través de la prueba T student, Shapiro Wilk y el coeficiente de Pearson. Resultados: Se estableció que el ancho palatino presenta una media de 3,43 (+0,31) cm. para el sexo masculino y 3,62 (+0,25) cm. para el femenino, en la longitud palatina la media fue de 5,07 (+0,44) cm. para masculino y 4,79 (+0,41) cm. en el femenino; en el índice palatino, el 100% de los cráneos de sexo masculino corresponden al paladar duro estrecho y en el femenino un 73,7% al estrecho, un 21% al intermedio y un 5,3% al ancho. Además, se determinó que existió diferencias estadísticamente significativas entre los parámetros del ancho y longitud de la bóveda palatina entre ambos sexos y se planteó una fórmula de análisis discriminante. Conclusión: El análisis morfométrico de bóvedas palatinas establece una precisión de 83.72% en la estimación del dimorfismo sexual.

Abstracts: Objective: Determine sexual dimorphism precision via palatal vault morphometric analysis in craniums sourced from the Laboratorio de Investigación Forense del Equipo Forense Especializado (EFE) de Ayacucho del Ministerio Público- Perú. Materials and Methods: Cross-sectional design consisting of a sample of 43 skulls with pre-established biological gender, (24 males and 19 females). Sexual dimorphism was established by means of the method proposed by Meera Jacob and co., based on palatal width and length measurements, after which the palatal index was calculated, establishing the method's precision and accuracy. The inferential analysis was made with a level of significance of 5% through the T student test, Shapiro Wilk and Pearson's coefficient. Results: Palatal width had a mean of 3.43 (+0.31cm) for males and 3.62 (+0.25) for females and in palatal length a mean of 5.07 (+0.44) cm. for males and 4.79 (+0.41) cm. for females is established; on palatal index, 100% of the male skulls correspond to hard narrow palate and on females 73.7% to narrow, 21% to intermediate and 5.3% to wide. Furthermore, it was determined that there were statistically significant differences between width and length of palatal vault for both genders, and a discriminating analysis formula was proposed. Conclusion: Morphometric analyses of palatal vaults establish an 83.72% precision on the estimation of sexual dimorphism.

The Heritability of Palatal Rugae Morphology Among Siblings*, †.

Although there is clinical applicability of the palatal rugae as an identification tool in forensic odontology, controversy exists whether the palatal rugae patterns are stable or variable. The greater the genetic component, the higher the probability that palatal rugae patterns are stable. The aim of this study was to compare the palatal rugae morphology between full siblings and the proportion of variability due to genetic component. This cross-sectional study was conducted on digital models of 162 siblings aged 15-30 years old. The palatal rugae patterns were assessed with Thomas and Kotze (1983) classification using Geomagic Studio software (3D Systems, Rock Hill, SC). The palatal rugae morphology between siblings showed significantly similar characteristics for total number of left rugae (p = 0.001), left primary rugae (p = 0.017), secondary rugae for right (p = 0.024) and left sides (p = 0.001), right straight rugae (p = 0.010), and right convergent rugae (p = 0.005) accounting for at least 6.25%-12.8% of the variability due to heredity. Despite the similarities found, the palatal rugae patterns showed significant differences between siblings of at least 46.9% (p = 0.001). Zero heritability was found in 9 of the 14 rugae patterns. Meanwhile, total number of rugae, primary, backward, and convergent rugae showed moderate heritability (h2  > 0.3) and total number of secondary rugae showed high heritability (h2  > 0.6). In conclusion, despite the individuality characteristics, an appreciable hereditary component is observed with significant similarities found between sibling pairs and the palatal rugae patterns were both environmentally and genetically influenced.

Forensic odontology with digital technologies: A systematic review.

Postmortem dental examinations play an important role in individual identification. In forensic odontology, individual identification is based on a traditional visual comparison of the antemortem dental record and dental radiographs with those obtained by postmortem examinations. Digitization in forensic odontology has recently started. The aim of this systematic review was to reveal the progress in forensic odontology by using ante/postmortem information obtained by digital technologies. Thirty-six eligible studies were included. No methods with digital technology have been accepted worldwide because of various factors such as expensive special equipment and the cost of other components. Further research should be conducted and progress should be made in the field of forensic odontology along with the progression of general digital technology.