Long-term effect of exposure to triethylene glycol dimethacrylate (TEGDMA) on male mouse reproduction.

Our study investigated the impact on male mouse fertility and reproduction of long-term (14 weeks) exposure to triethylene glycol dimethacrylate (TEGDMA), a co-monomer of resin-based compounds, at doses of 0.01, 0.1, 1, and 10 ppm. Test and control mice were then paired with sexually mature untreated female mice and their fertility evaluated. Females paired with males exposed to all TEGDMA doses exhibited a significant decline in pregnancy rates, and significant increases in the total embryonic resorption-to-implantation ratio, except for males exposed to 0.01 ppm TEGDMA. Males in the highest dose group (10 ppm) showed significant increases in seminal vesicle and preputial gland weights. They also had significantly higher serum levels of luteinizing hormone (LH) and follicle stimulating hormone (FSH) than the controls, and the 0.01 ppm dosage group for FSH levels. TEGDMA exposure resulted in notable histopathological alterations in the testis, with detachment of germ cells and shedding of germinal epithelium into the tubule lumen. These results strongly indicate that TEGDMA exposure has detrimental consequences on the reproductive abilities and functions in male mice through disruption of the standard hormonal regulation of the reproductive system, leading to changes in spermatogenesis and ultimately leading to decreased fertility.

Toxicity of resin-matrix cements in contact with fibroblast or mesenchymal cells.

The main aim of this study was to perform an integrative review on the toxic effects of resin-matrix cements and their products in contact with fibroblasts or mesenchymal cells. A bibliographic search was performed on PubMed using the following search terms: "cytotoxicity" AND "fibroblast" OR "epithelial" OR "mesenchymal" AND "polymerization" OR "degree of conversion" OR "methacrylate" OR "monomer" AND "resin cement" OR "resin-based cement". The initial search in the available database yielded a total of 277 articles of which 21 articles were included in this review. A decrease in the viability of mouse fibroblasts ranged between 13 and 15% that was recorded for different resin-matrix cements after light curing exposure for 20 s. The viability of human fibroblasts was recorded at 83.11% after light curing for 20 s that increased up to 90.9% after light curing exposure for 40 s. Most of the studies linked the highest toxicity levels when the cells were in contact with Bis-GMA followed by UDMA, TEGDMA and HEMA. Resin-matrix cements cause a cytotoxic reaction when in contact with fibroblasts or mesenchymal cells due to the release of monomers from the polymeric matrix. The amount of monomers released from the resin matrix and their cytotoxicity depends on the polymerization parameters.

Alternative co-initiators for photocurable dental resins: Polymerisation, quantum yield of conversion and cytotoxicity.

OBJECTIVE: Cyclic acetals such as are naturally occurring compounds capable of acting as co-initiators during free-radical polymerisation, and potentially serve to offer non-allergic and biologically less toxic alternatives to conventional (tertiary) amines. The current study aimed to evaluate the polymerisation efficiency and potential toxicity of cyclic acetals compared with conventional photoinitiator systems in photocurable dental resins. METHODS: Both, 1,3 benzodioxole (BZD) and piperonyl alcohol (PA) were used in 0.5, 1.0, 1.5, 2.0, 3.0, 4.0 and 6.0 mol% concentrations. Whereas, N-phenyl glycine (NPG) was utilised in 0.5, 1.0, 1.5, 2.0, 3.0, 4.0 mol% concentrations for photopolymerisation of an unfilled model resin system, BisGMA and TEGDMA (1:1 mass %), involving three separate camphorquinone (CQ) concentrations of 0.5 (Low), 1.0 (Intermediate) and 1.5 (High) mol%. Conventional tertiary amines; ethyl-4-dimethyamino benzoate (EDMAB) and dimethylaminoethyl methacrylate (DMAEMA) were utilised for comparison. Real-time degree of conversion (DC, %) was evaluated using Fourier transform near-infra-red spectroscopy and quantum yield of conversion of CQ was calculated using UV-Vis spectroscopy. Cytotoxicity of NPG and cyclic acetals were assessed using MTT to determine metabolic activity of human dental pulp cells (HDPCs). RESULTS: The cyclic acetals were capable of facilitating free radical polymerisation as co-initiators at all three CQ concentrations. Furthermore, the use of NPG as a co-initiator resulted in post-irradiation DC (%) that were comparable to both EDMAB and DMAEMA for all CQ concentrations. Alternative compounds facilitated the hydrogen abstraction process, which provided high conversion of CQ molecules. Quantum yield increased from 0.009 ± 0.0001 (0.5 mol%) to 0.03 ± 0.006 (6.0 mol%), and 0.01 ± 0.0003 (0.5 mol%) to 0.04 ± 0.001 (6.0 mol%), for respective BZD and PA formulations involving 1.0 mol% CQ. The use of NPG led to relatively higher quantum yield values (Up to 0.09 ± 0.007 at 4.0 mol%), though it exhibited competitive effects in absorbing blue light, which might be attributed to the photolytic degradation of NPG and the formation of N-methylaniline. MTT assay indicated alternative co-initiators to be comparatively less cytotoxic than EDMAB and CQ. Relative metablic activity of HDPCs treated with BZD, PA, and NPG eluates were 58.3 ± 15.7, 57.5 ± 17.4 and 64.6 ± 12.2 %, when compared with untreated HDPCs group (Control), respectively. Exposure to DMAEMA-based eluate led to relative metabolic activity (60.0 ± 0.5 %) that was comparable to that of cyclic acetals. Treatment with neat model resin eluate displayed the highest relative reduction in metabolic activity (28.9 ± 22.4) (P < 0.05), suggesting bisGMA and TEGDMA monomers played significant role in the overall cytotoxicity of photocurable systems involving HDPCs. SIGNIFICANCE: Cyclic acetals were capable of facilitating photo-induced free radical polymerisation reactions with relatively less cytotoxicity compared with their amine counterparts, which might realise reduced cytotoxicity of photocurable materials used for dentistry and biomaterial applications.

Biotoxicity Evaluation of a Cationic Star Polymer on a Predatory Ladybird and Cooperative Pest Control by Polymer-Delivered Pesticides and Ladybird.

Although employing nanocarriers for gene/drug delivery shows great potential in agricultural fields, the biotoxicity of nanocarriers is a major concern for large-scale applications. Herein, we synthesized a cationic star polymer (SPc) as a pesticide nanocarrier/adjuvant to evaluate its safety against a widely used predatory ladybird (Harmonia axyridis). The application of SPc at extremely high concentrations nearly did not influence the hatching of ladybird eggs but it led to the death of ladybird larvae at lethal concentration 50 (LC50) values of 43.96 and 19.85 mg/mL through the soaking and feeding methods, respectively. The oral feeding of SPc downregulated many membrane protein genes and lysosome genes significantly, and the cell membrane and nucleus in gut tissues were remarkably damaged by SPc application, revealing that the lethal mechanism might be SPc-mediated membrane damage. Furthermore, the oral feeding of SPc increased the relative abundance of Serratia bacteria in ladybird guts to result in bacterial infection. Coapplication of ladybird and SPc-loaded thiamethoxam/matrine achieved desired control efficacies of more than 80% against green peach aphids, revealing that the coapplication could overcome the slow-acting property of ladybirds. To our knowledge, this is the first attempt to investigate the polymer-mediated lethal mechanism toward natural enemies and explore the possibility of coapplying SPc-loaded pesticides and natural enemies for pest management.

Multifunctional Size-Expandable Nanomedicines Enhance Tumor Accumulation and Penetration for Synergistic Chemo-Photothermal Therapy.

Size expansion can effectively improve tumor accumulation of nanocarriers where precise control is required. A dual-responsive nanocarrier stimulated by both endogenous pH and exogenous heat stimuli can change its size. Herein, a nanoparticle composed of poly(N,N-diethyl acrylamide) (PDEAA) and poly(2-(diisopropylamino) ethyl methacrylate) (PDPA) is developed. The antitumor drug celastrol (CLT) and the photosensitizer indocyanine green (ICG) are then loaded in it to form CIPP. ICG generates heat under near-infrared (NIR) stimulation to kill tumor cells and enhance CIPP penetration. Meanwhile, CIPP expands in response to hyperthermia and acid tumor microenvironments, preventing itself from returning to the blood flow, thus accumulating in tumor sites. Ultimately, the acidic lysosomal environment in tumor cells disintegrates CIPP to release CLT, directly inducing immunogenic cell death and sensitizing tumor cells for hyperthermia by disrupting the interaction of heat shock protein 90 and P50cdc37. Most of the tumors in B16F10-bearing mice are eradicated after single laser irradiation. The dual-responsive CIPP with multiple functions and simple design displays a synergistic antitumor effect. This study provides a basis for developing size-expandable stimulus-responsive drug delivery systems against tumors.

Establishment and characterization of lung co-culture spheroids for paclitaxel loaded Eudragit® RL 100 nanoparticle evaluation.

3D cell cultures are regarded as a better and more relevant approach for screening drugs and therapeutics, particularly due to their likeness with the in vivo conditions. Spheroids offer an intermediate platform between in vitro and in vivo models, for conducting tumor-based investigations. In this study, a simple setup was developed for consistent generation of lung co-culture spheroids, which were developed using the cancer cell lines A549, NCI H460, and fibroblast cells WI-38. The potential of these spheroids for evaluating the toxicity of Eudragit® RL 100 nanoparticles (ENP) was explored. Monodisperse ENP, having the size range of 140-200 nm was prepared using the nanoprecipitation method. These were loaded with the poorly water-soluble anticancer drug paclitaxel. The evaluation of toxicity and uptake of drug-loaded ENP revealed that 2D monolayers were more sensitive to treatment than 3D spheroids. Within spheroids, co-cultures were more resistant to the treatment than monocultures. Overall, our findings demonstrated that the lung co-culture spheroids were a suitable model for accelerating the efficacy and toxicity-related investigations of novel drug delivery systems.

Immune Effect Regulated by the Chain Length: Interaction between Immune Cell Surface Receptors and Synthetic Glycopolymers.

Glycopolymer-based drugs for immunotherapy have attracted increasing attention because the affinity between glycans and proteins plays an important role in immune responses. Previous studies indicate that the polymer chain length influences the affinity. In the studies on enhancing the immune response by glycans, it is found that both oligosaccharides and long-chain glycopolymers work well. However, there is a lack of systematic studies on the immune enhancement effect and the binding ability of oligomers and polymers to immune-related proteins. In this paper, to study the influence of the chain length, glycopolymers based on N-acetylglucosamine with different chain lengths were synthesized, and their interaction with immune-related proteins and their effect on dendritic cell maturation were evaluated. It was proved that compared with l-glycopolymers (degree of polymerization (DP) > 20), s-glycopolymers (DP < 20) showed better binding ability to the dendritic cell-specific ICAM-3-grabbing nonintegrin protein and the toll-like receptor 4 and myeloid differentiation factor 2 complex protein by quartz crystal microbalance and molecular docking simulation. When the total sugar unit amounts are equal, s-glycopolymers are proved to be superior in promoting dendritic cell maturation by detecting the expression level of CD80 and CD86 on the surface of dendritic cells. Through the combination of experimental characterization and theoretical simulation, a deep look into the interaction between immune-related proteins and glycopolymers with different chain lengths is helpful to improve the understanding of the immune-related interactions and provides a good theoretical basis for the design of new glycopolymer-based immune drugs.

Protective effects of non-thermal plasma on triethylene glycol dimethacrylate-induced damage in odontoblast-like MDPC-23 cells.

AIM: To evaluate whether the use of non-thermal plasma (NTP) could reduce triethylene glycol dimethacrylate (TEGDMA)-mediated damage in MDPC-23 cells. METHODOLOGY: The effects of NTP and TEGDMA on MDPC-23 cell proliferation were tested using WST-1 assays after pretreatment with NTP for 1 min and exposure to TEGDMA. Live/Dead assays were used to visualize cell death. To monitor the effects of NTP and TEGDMA on the cell cycle and apoptotic cell death, flow cytometry was performed. Western blotting was used to assess changes in protein levels mediated by NTP and TEGDMA treatment, and enzyme-linked immunosorbent assays were performed to evaluate the effects of NTP and TEGDMA on prostaglandin E2 (PGE2 ) expression. One-way analysis of variance and Duncan's post hoc tests were used for statistical analysis. RESULTS: NTP treatment effectively protected cells from TEGDMA-mediated cell damage and blocked TEGDMA-mediated cell growth inhibition (p < .05). NTP appeared to protect cells from death (p < .05) and blocked TEGDMA-mediated apoptotic cell death. Additionally, NTP reduced TEGDMA-mediated apoptotic activation of poly (ADP) ribose polymerase-1 and caspase-3 (p < .05). Furthermore, NTP effectively reduced TEGDMA-mediated expression of cyclooxygenase-2 and PGE2 proteins by inhibiting nuclear factor-κB protein expression (p < .05). CONCLUSIONS: NTP alleviated TEGDMA-mediated adverse effects by reducing cytotoxicity and inflammatory reactions in cells exposed to TEGDMA.

Notoginsenoside R1 alleviates TEGDMA-induced mitochondrial apoptosis in preodontoblasts through activation of Akt/Nrf2 pathway-dependent mitophagy.

Incomplete polymerization or biodegradation of dental resin materials results in the release of resin monomers such as triethylene glycol dimethacrylate (TEGDMA), causing severe injury of dental pulp cells. To date, there has been no efficient treatment option for this complication, in part due to the lack of understanding of the mechanism underlying these phenomena. Here, for the first time, we found that notoginsenoside R1 (NR1), a bioactive ingredient extracted from Panax notoginseng, exerted an obvious protective effect on TEGDMA-induced mitochondrial apoptosis in the preodontoblast mDPC6T cell line. In terms of the mechanism of action, NR1 enhanced the level of phosphorylated Akt (protein kinase B), resulting in the activation of a transcriptional factor, nuclear factor erythroid 2-related factor 2 (Nrf2), and eventually upregulating cellular ability to resist TEGDMA-related toxicity. Inhibiting the Akt/Nrf2 pathway by pharmaceutical inhibitors significantly decreased NR1-mediated cellular antioxidant properties and aggravated mitochondrial oxidative damage in TEGDMA-treated cells. Interestingly, NR1 also promoted mitophagy, which was identified as the potential downstream of the Akt/Nrf2 pathway. Blocking the Akt/Nrf2 pathway inhibited mitophagy and abolished the protection of NR1 on cells exposed to TEGDMA. In conclusion, these findings reveal that the activation of Akt/Nrf2 pathway-mediated mitophagy by NR1 might be a promising approach for preventing resin monomer-induced dental pulp injury.

Influence of TEGDMA monomer on MMP-2, MMP-8, and MMP-9 production and collagenase activity in pulp cells.

OBJECTIVES: Resin-based composites may leach monomers such as triethylene-glycol dimethacrylate (TEGDMA), which could contribute to intrapulpal inflammation. The aim of this investigation was to examine whether various concentrations of TEGDMA are able to influence dentally relevant Matrix metalloproteinase (MMP)-2, MMP-8, and MMP-9 production, total collagenase/gelatinase activity in pulp cells, and suggest possible signaling mechanisms. MATERIALS AND METHODS: Pulp cells were cultured, followed by a 1-day exposure to sublethal TEGDMA concentrations (0.1, 0.2, and 0.75 mM). Total MMP activity was measured by an EnzCheck total collagenase/gelatinase assay, while the production of specific MMPs and the relative changes of phosphorylated, i.e., activated signaling protein levels of extracellular signal-regulated kinase (ERK)1/2, p38, c-Jun N-terminal kinase (JNK) were identified by western blot. Immunocytochemistry image data was also plotted and analyzed to see whether TEGDMA could possibly alter MMP production. RESULTS: An increase in activated MMP-2, MMP-8, and MMP-9 production as well as total collagenase activity was seen after a 24-h exposure to the abovementioned TEGDMA concentrations. Increase was most substantial at 0.1 (P = 0.002) and 0.2 mM (P = 0.0381). Concurrent p-ERK, p-p38, and p-JNK elevations were also detected. CONCLUSIONS: Results suggest that monomers such as TEGDMA, leached from resin-based restorative materials, activate and induce the production of dentally relevant MMPs in pulp cells. Activation of ERK1/2, p38, or JNK and MMP increase may play a role in and/or can be part of a broader stress response. Clinical relevance Induction of MMP production and activity may further be components in the mechanisms of intrapulpal monomer toxicity.

Synthesis and characterization of thermo/pH-sensitive pectin-graft-poly(dimethylaminoethyl methacrylate) coated magnetic nanoparticles.

Herein, thermo- and pH-sensitive pectin-graft-poly(dimethylaminoethyl methacrylate) copolymer-coated magnetic nanoparticles were synthesized via a green and rapid synthetic approach based on microwave irradiation. Firstly, a novel thermo- and pH-sensitive pectin-graft-poly(dimethylaminoethyl methacrylate) copolymer (Pec-g-PolyDMAEMA) was synthesized and then, Pec-g-PolyDMAEMA based magnetic nanoparticles (Pec-g-PolyDMAEMA@Fe3O4) were produced via microwave-assisted co-precipitation method. The thermo/pH/magnetic field multi-sensitive hybrid nanoparticle was characterized by techniques like TEM, VSM, FT-IR, and TGA/DSC. In vitro release studies of 5-Fluorouracil (FL) were carried out by altering the temperature (37 and 44°C), pH (5.5 and 7.4) and presence of an AMF. The FL release of Pec-g-PolyDMAEMA@Fe3O4@FL exhibited pH-sensitive behavior. They showed thermo/pH-sensitive FL release features with the greatest release of FL at 37°C (56%) than at 44°C (40%) and at pH of 7.4 (63%) than at pH of 5.5 (45%) within 48h. The FL release was also significantly increased (100%) with the presence of a 50 mT magnetic field. These results indicate that the developed Pec-g-PolyDMAEMA@Fe3O4 nanoparticles are promising in the application of multi-stimuli-sensitive delivery of drugs.

The self-renewal dental pulp stem cell microtissues challenged by a toxic dental monomer.

Dental pulp stem cells (DPSCs) regenerate injured/diseased pulp tissue and deposit tertiary dentin. DPSCs stress response can be activated by exposing cells to the monomer triethyleneglycol dimethacrylate (TEGDMA) and inducing the DNA-damage inducible transcript 4 (DDIT4) protein expression. The goal of the present study was to determine the impact of TEGDMA on the ability of DPSCs to maintain their self-renewal capabilities, develop and preserve their 3D structures and deposit the mineral. Human primary and immortalized DPSCs were cultured in extracellular matrix/basement membrane (ECM/BM) to support stemness and to create multicellular interacting layers (microtissues). The microtissues were exposed to the toxic concentrations of TEGDMA (0.5 and 1.5 mmol/l). The DPSCs spatial architecture was assessed by confocal microscopy. Mineral deposition was detected by alizarin red staining and visualized by stereoscopy. Cellular self-renewal transcription factor SOX2 was determined by immunocytochemistry. The microtissue thicknesses/vertical growth, surface area of the mineralizing microtissues, the percentage of area covered by the deposited mineral, and the fluorescence intensity of the immunostained cells were quantified ImageJ. DDIT4 expression was determined by a single molecule RNA-FISH technique and the cell phenotype was determined morphologically. DDIT4 expression was correlated with the cytotoxic phenotype. TEGDMA affected the structures of developing and mature microtissues. It inhibited the deposition of the mineral in the matrix while not affecting the SOX2 expression. Our data demonstrate that DPSCs retained their self-renewal capacity although their other functions were impeded. Since the DPSCs pool remained preserved, properties effected by the irritant should be restored by a proper rescue therapy.

Cytocompatible and non-fouling zwitterionic hyaluronic acid-based hydrogels using thiol-ene "click" chemistry for cell encapsulation.

In this work, a facile click reaction strategy is employed to form hydrogels in situ with cytocompatibility, biodegradability, self-healing property and resistance to protein. The thiol-functionalized zwitterionic carboxybetaine methacrylate copolymer, which take part as a cross-linker in the "thiol-ene" click reaction with the methacrylated hyaluronic acid. The hydrogels are obtained under the physiological condition without the presence of any copper catalyst and UV light. The hydrogel consisting of zwitterionic component shows an obvious reduction in protein adsorption and cell adhesion and avoid non-targeted factor interference in the biological experiments. The hydrogels also demonstrate adjustable degradation behavior. Human mesenchymal stem cells (hMSCs) are easily encapsulated into the hydrogels and remains metabolically active, indicating the excellent biocompatibility of the hydrogels. Additionally, the result of the cytokine secretion assays (IL-6 and TNF-α) has shown that this clickable hydrogel can serve to suppress inflammatory reactions and is beneficial for in vivo applications. Based on the above results, this clickable hydrogel with excellent performance can be an amenable platform for 3D cell encapsulation.

Illuminating the cellular and molecular mechanism of the potential toxicity of methacrylate monomers used in biomaterials.

The cytotoxicity of methacrylate-based biopolymers crosslinked by in situ photopolymerization has been attributed mainly to residual methacrylate monomers released due to incomplete polymerization. The residual monomers, primarily triethyleneglycol dimethacrylate or 2-hydroxyethyl methacrylate, may irritate adjacent tissue, or be released into the bloodstream and reach practically all tissues. Increased production of reactive oxygen species, which may be connected to concomitant glutathione depletion, has been the most noticeable effect observed in vitro following the exposure of cells to methacrylates. Radical scavengers such as glutathione or N-acetylcysteine represent the most important cellular strategy against methacrylate-induced toxicity by direct adduct formation, resulting in monomer detoxification. Reactive oxygen species may participate in methacrylate-induced genotoxic or pro-apoptotic effects and cell-cycle arrest via induction of corresponding molecular pathways in cells. A deeper understanding of the biological mechanisms and effects of methacrylates widely used in various bioapplications may enable a better estimation of potential risks and thus, selection of a more appropriate composition of polymer material to eliminate potentially harmful substances such as triethyleneglycol dimethacrylate.

Stimulus-Responsive Polyzwitterionic Surfaces Made from Itaconic Acid: Self-Triggered Antimicrobial Activity, Protein Repellency, and Cell Compatibility.

A functional monomer carrying a carboxylate and a protected primary ammonium group is synthesized from itaconic acid. When copolymerized with dimethyl acrylamide and 4-methacryloyloxybenzophenone, cross-linkable polyzwitterions are obtained. These are converted to surface-attached polyzwitterion networks by simultaneous UV-triggered C,H insertion reactions. The resulting polyzwitterion-coated substrates were studied by surface plasmon resonance spectroscopy measurements, ζ potential and various biological assays. They were (expectedly) protein repellent, yet at the same time (and unexpectedly) cell-adhesive and antimicrobially active. This was attributed to stimulus-responsiveness of the polyzwitterion (confirmed by the ζ potential measurements), which enables charge adjustment at different pH values. When protonated, the polyzwitterions become amphiphilic polycations and, in this state, kill bacteria upon contact like their parent structures (polymer-based synthetic mimics of antimicrobial peptides, SMAMPs).

Synthesis and in vitro cytotoxicity evaluation of star-shaped polymethacrylic conjugates with methotrexate or acitretin as potential antipsoriatic prodrugs.

Water-soluble polymer-drug conjugates were obtained and analyzed towards their potential use as prodrugs for two hydrophobic antipsoriatic agents, including methotrexate (MTX) and acitretin (AC). The conjugation efficacy of MTX decreased with a decreasing molar ratio of N,N-dimethylaminoethyl methacrylate (DMAEMA) repeating units in the polymethacrylic chains. Cytotoxicity of positively charged (from +5 to +10 mV) nano- and microparticles (3-1500 nm in DMEM at 37 °C) were estimated by in vitro MTT and Annexin-V apoptosis assays on Me45, NHDF, HaCaT and BEAS-2B cell lines. Further, cell cycle analysis revealed arrest in G0/G1 phase in melanoma cells, while neither apoptosis induction nor cell cycle arrest occurred in normal epidermal and epithelial cells. Tested conjugates displayed a novel cytostatic effect in Me45 cells and a pro-apoptotic effect in HaCaT cells. Epithelial BEAS-2B cells were the most sensitive to the tested conjugates and responded via induction of necrosis. Cell line models allowed for characterization of the biologically relevant potential action of pro-drugs. Additionally, a skin in vitro evaluation assay provided the first known evidence of side-effect reduction with pro-drug use. Histological examinations confirmed the lack of negative effects of conjugates on the skin and showed no irritating properties.

Acrylated Eudragit® E PO as a novel polymeric excipient with enhanced mucoadhesive properties for application in nasal drug delivery.

Eudragit® E PO (EPO) is a terpolymer based on N,N-dimethylaminoethyl methacrylate with methylmethacrylate and butylmethacrylate, produced by Evonik Industries AG as a pharmaceutical excipient. In this work, EPO was chemically modified through reaction with acryloyl chloride. The successful modification of EPO was confirmed by FTIR, NMR-spectroscopy, elemental and thermal analysis. The degree of acrylation was determined by permanganatometric titration. The slug mucosal irritation test was used to demonstrate non-irritant nature of EPO and its acrylated derivatives (AEPO). The mucoadhesive properties of EPO and AEPO were evaluated using freshly excised sheep nasal mucosa and it was demonstrated that acrylated polymers facilitated greater retention of sodium fluorescein on mucosal surfaces compared to solution mixture of this dye solution with EPO as well as free dye.

A terpolymeric hydrogel of hyaluronate-hydroxyethyl acrylate-gelatin methacryloyl with tunable properties as biomaterial.

Here, we report synthesis of a terpolymeric covalently crosslinked hydrogel of hyaluronate (HA) as biomaterial with elasticity, mechanical properties and cell interactions via conventional free radical polymerization technique. To provide elasticity and mechanical properties, 2-hydroxyethyl acrylate (HEA) was grafted in HA, while to tune cellular interactions, gelatin methacryloyl (GM) was used as crosslinker. The composition and probable structure of the terpolymer (HA-g-pHEA-x-GM) were analysed by FTIR, 1H HR-MAS-NMR, and TGA analyses. The SEM and texture analyses of hydrogel showed interconnected micro-porous network and high mechanical properties, respectively. In vitro biocompatibility was studied against human chondrocytes, whereas, in vivo biocompatibility and tissue regeneration were confirmed using mouse model. The hydrogel releases model protein-bovine serum albumin, and corticosteroid drug-dexamethasone in a sustain way at pH 7.4 and 37 °C. Overall, the tunable mechanical properties, micro-porous network, and cytocompatibility of the HA-g-pHEA-x-GM hydrogel highlights its potential applicability in cartilage tissue engineering and drug delivery.

Glycopolymers/PEI complexes as serum-tolerant vectors for enhanced gene delivery to hepatocytes.

Serum stability is a crucial factor for ideal polymeric gene vectors. In this work, a series of serum-tolerant and low-toxicity glycopolymers/poly(ethyleneimine) (PEI) complexes were designed for gene delivery. Atomic transfer radical polymerization (ATRP) was used to synthesize the comb-shaped random copolymers dextran-g-poly(2-dimethylaminoethyl methacrylate-co-2-lactobionamidoethyl methacrylate) (DDrL). Then DDrLs/PEI were investigated for their use as plasmid DNA (pDNA) vectors, which can completely condense the pDNA into nanoparticles. The DDrLs/PEI/pDNA complexes in serum-containing media showed better stability than PEI/pDNA complexes. in vitro gene transfection studies showed that DDrLs/PEI exhibited a remarkable transfection efficiency enhancement in the presence of serum compared to that in serum-free conditions. Moreover, the transfection level of DDrLs/PEI were two orders of magnitude higher than that of PEI alone in the presence of 30% serum. DDrLs/PEI complexes with galactose enhanced pDNA delivery to hepatocytes, with higher protein expression in ASGPr-presenting HepG2 than in HeLa cells, which lack the receptor. All of the DDrLs/PEI/pDNA complexes had lower cytotoxicity than PEI/pDNA.

Mixed-Charged Zwitterionic Polymeric Micelles for Tumor Acidic Environment Responsive Intracellular Drug Delivery.

A new class of mixed-charged zwitterionic copolymer poly(aminoethyl methacrylate)- co-poly(methacrylic acid)- co-poly( n-butyl methacrylate) (CPMA) was prepared as drug nanocarrier for efficient intracellular delivery of Doxorubicin (DOX). The mixed-charged CPMA copolymer could readily assemble to micelles in physiological environment (pH 7.4) with the size of 42.6 nm and zeta potential of -26 mV, which would lead to a prolonged circulation time and enhanced tumor penetration. However, the micelles formed large aggregates due to the protonation of carboxyl groups at extracellular tumor pH (pH 6.5). Meanwhile, the zeta potential of CPMA micelles increased from -26 mV to -6 mV when the solution pH was changed from pH 7.4 to pH 6.5. The increase of size and zeta potential at extracellular tumor pH could benefit the retention of micelles in tumor matrix and uptake by cancer cells. The DOX-loaded mixed-charged CPMA micelles could induce a higher internalization at pH 6.5 than 7.4 at varied time periods. Moreover, cytotoxicity assay demonstrated that the blank micelles showed excellent biocompatibility, but were highly cytotoxic toward KB cells after loading with DOX. Thus, the mixed-charged zwitterionic polymeric micelles might be a promising carrier for tumor acidic environment responsive drug delivery.