[A new occupational and environmental hazard - nanoplastic]. / Nowe zagrozenie zawodowe i srodowiskowe ­ nanoplastik.

Problems arising from the accumulation of plastic waste in the environment have become global. Appeals to stop the usage of disposable drinking straws or plastic cutlery did not come out without reason - 320 million tons of plastic products are produced annually, of which 40% are disposable items. More and more countries and private enterprises are giving up these types of items in favor of their biodegradable substitutes, e.g., cardboard drinking straws. Plastic waste in the environment is subject to a number of physicochemical interactions and biodegradation in which bacteria are involved. By using synthetic waste, they reduce the size of plastic garbage while increasing its dispersion in the environment. Small plastic particles, invisible to the naked eye, are called nanoplastic. Nanoplastic is not inert to living organisms. Due to its size, it is taken up with food by animals and passed on in the trophic chain. The ability to penetrate the body's barriers through nanoplastic leads to the induction of biological effects with various outcomes. Research studies on the interaction of nanoplastic with living organisms are carried out in many laboratories; however, their number is still a drop in the ocean of the data needed to draw clear-cut conclusions about the impact of nanoplastic on living organisms. There is also no data on the direct exposure to nanoplastic contamination at workplaces, schools and public utilities, standards describing the acceptable concentration of nanoplastic in food products and drinking water, and in vitro tests on nanoparticles other than polystyrene nanoparticles. Complementing the existing data will allow assessing the risks arising from the exposure of organisms to nanoplastic. Med Pr. 2020;71(6):743-56.

Morphology-transport relationships in liquid chromatography: Application to method development in size exclusion chromatography.

We present relationships between the multiscale structure and the separation properties of size exclusion chromatography (SEC) columns. Physical bed reconstructions of wall and bulk regions from a 2.1 mm i.d. column packed with fully porous 1.7 µm bridged-ethyl hybrid (BEH) particles, obtained by focused ion-beam scanning electron microscopy, serve as geometrical models for the packing microstructure in wall and central regions of a typical narrow-bore SEC column. In addition, the intraparticle mesopore space morphology of the BEH particles is reconstructed using electron tomography, to ultimately construct a realistic multiscale model of the bed morphology from mesopore level via interparticle macropore space to transcolumn scale. Complemented by the results of eddy dispersion simulations in computer-generated bulk packings, relationships between packing microstructure and transchannel, short-range interchannel, as well as transcolumn eddy dispersion are used to analyze the fluid dynamics in the interparticle macropore space of the model. Further, we simulate hindered diffusion and accessible porosity for passive, finite-size tracers in the intraparticle mesopore space, to finally determine the effective particle and bed diffusion coefficients of these tracers in the hierarchical (macro-mesoporous) bed. Retention and transport properties of polystyrene standards with hydrodynamic diameters from 5 to 95 Å in tetrahydrofuran are subsequently predicted without introducing bias from arbitrary models. These properties include the elution volumes of the polystyrene standards, the global peak capacity (over the entire separation window), and the rate of peak capacity at any fixed elution volume. Optimal flow rates yielding maximal global peak capacity and a nearly uniform rate of peak capacity over the entire separation window are close to 0.04 and 0.20 mL/min, respectively. SEC column performance obtained for fully porous and superficially porous particles is compared by varying the core-to-particle diameter ratio ρ from 0 to 0.95. Because the separation window is narrowing more rapidly than the rate of peak capacity is growing with increasing ρ, core-shell particles always provide smaller global peak capacity; they still can be advantageous but only for simple sample mixtures. The presented morphology-performance approach holds great promise for method development in SEC.

Stiffness measurement of nanosized liposomes using solid-state nanopore sensor with automated recapturing platform.

This paper describes a method to gauge the stiffness of nanosized liposomes - a nanoscale vesicle - using a custom-made recapture platform coupled to a solid-state nanopore sensor. The recapture platform electrically profiles a given liposome vesicle multiple times through automated reversal of the voltage polarity immediately following a translocation instance to re-translocate the same analyte through the nanopore - provides better statistical insight at the molecular level by analyzing the same particle multiple times compared to conventional nanopore platforms. The capture frequency depends on the applied voltage with lower voltages (i.e., 100 mV) permitting higher recapture instances than at higher voltages (>200 mV) since the probability of particles exiting the nanopore capture radius increases with voltage. The shape deformation was inferred by comparing the normalized relative current blockade ( ΔI/I0̂) at the two voltage polarities to that of a rigid particle, i.e., polystyrene beads. We found that liposomes deform to adopt a prolate shape at higher voltages. This platform can be further applied to investigate the stiffness of other types of soft matters, e.g., virus, exosomes, endosomes, and accelerate the potential studies in pharmaceutics for increasing the drug packing and unpacking mechanism by controlling the stiffness of the drug vesicles.

Respirometry: correcting for diffusion and validating the use of plastic multiwell plates with integrated optodes.

Polystyrene multiwell plates with integrated optodes act as multiple closed-system respirometers that enable the simultaneous measurement of oxygen consumption in small animals. However, the diffusion of oxygen through polystyrene needs to be taken into consideration. Here we provide an equation that accounts for the empirically determined rate of oxygen through a polystyrene well when calculating the instantaneous rate of oxygen consumption. Furthermore, we describe a novel method of calibrating a small respirometer for accuracy using micro-osmotic pumps containing an oxygen scavenger, which is delivered at a constant rate and therefore yields a constant rate of oxygen consumption in an airtight system.

Evaluation of different adsorbents for large-volume pre-concentration for analyzing atmospheric persistent organic pollutants at trace levels.

This paper investigates the performance of some adsorbents, Carbopack B, Tenax-GC, and XAD-2, in a SPE and GC analytical method for sampling and determining some persistent organic pollutants such as benzene, toluene, o-, m-, and p-xylenes, naphthalene, anthracene, fluorene, fluoranthene, benzo(i,k)fluorene, pyrene and benzo(a)pyrene, aldrin, dieldrin, endrin, endosulfan, and PCB congeners (nos. 1, 15, 44, 77, and 209). Adsorbents evaluated in this study are Carbopack B, Tenax-GC, and XAD-2. Before applying the analytical method to air samples, it was widely investigated in laboratory: the sampler is constituted by a glass pyrex vial home-filled with 300 mg (sampling section) and 50 mg of adsorbent material (backup section). The re-extraction is performed by CS(2) (1-2 mL) and analysis is performed by GC-FID and GC-ECD. The evaluation of breakthrough volumes and desorption efficiencies shows the XAD-2 performance in the enrichment of different organic species present in atmosphere at trace levels (ppt) to be more advantageous than the other two materials in terms of analytical and technical parameters. One of the advantages is the high volume of sampled air with high concentration factor and limited loss of analytes (breakthrough volumes are higher than 5,000 L g(-1) for high-boiling compounds and higher than 400 L g(-1) for low-boiling solutes). Another advantage is the possibility of easy and speed re-extraction of analytes using small volumes of solvent (a few milliliters). The recoveries are about 100% with a RSD ≤ 2.3 for low-boiling compounds, and between 77% and 109% with a RSD ≤ 5.7% for high-boiling species. The XAD-2 adsorbent was applied to real air samples collected in different polluted areas (urban, industrial, rural, and remote locations) demonstrating the wide application of such methodology in various environmental situation.

Determination of Cd and Cr in an ABS candidate reference material by instrumental neutron activation analysis.

In order to practically better cope with technical barriers to trade (TBT) of a great number of resin goods, our research presents first-ever results for the determination of Cd and Cr in acrylonitrile butadiene styrene (ABS) candidate reference material using instrumental neutron activation analysis (INAA) recently recognized as a candidate primary ratio method with a particular attention to the estimation of involved measurement uncertainties.

Comparison of Amberlite IR 120 and dolomite's performances for removal of heavy metals.

The presence of heavy metals in the environment is major concern due to their toxicity. Contamination of heavy metals in water supplies has steadily increased over the last years as a result of over population and expansion of industrial activities. A strong cation-exchange resin, Amberlite IR 120 and a natural zeolite, dolomite were used for the removal of lead(II) and cadmium(II). The optimum conditions were determined in a batch system as concentration range was between 5 and 100 mg/L, pH range between 1 and 8, contact time between 5 and 90 min, and the amount of adsorbent was from 0.1 to 1g. A constant stirring speed, 2000 rpm, was chosen during all of the experiments. The optimum conditions were found to be a concentration of 20 mg/L, pH of 5, contact time of 60 min and 0.5 g of adsorbent. Also, for investigation of exchange equilibria different amounts of ion exchange resin and dolomite were contacted with a fixed volume and concentration of a heavy metal bearing solutions. Sorption data have been interpreted in terms of Langmuir and Freundlich equations. The effect of adsorption temperature on the heavy metals adsorption onto dolomite was investigated at three different temperatures (20, 40 and 60 degrees C). Thermodynamic parameters were calculated. The results obtained show that the Amberlite IR 120 strong cation-exchange resin and dolomite performed well for the removal of these heavy metals. As a low cost adsorbent, dolomite can preferable for removal of heavy metals from wastewaters.

Preparation and sensitization of polystyrene latex beads by some antigens and antibodies. Factors affecting sensitivity and specificity of latex agglutination tests.

Polystyrene latex beads were polymerized at two different pH (7.3 and 9.5) and their ability to create latex agglutination systems were studied. Sensitization of these latexes by DNA, antibodies to C-reactive protein, myoglobin, and human IgG. was conducted. Sensitivity and specificity of these systems were compared. Practical recommendations are given for preparation of such systems.

Antibacterial efficacy of triclosan-incorporated polymers.

Triclosan (2, 4, 4'-trichloro-2'-hydroxydiphenyl ether) is a broad-spectrum antimicrobial agent, routinely used in various personal care products.(1) It is also incorporated into polymers through melt-mixing, with the aim of providing persistent antibacterial action on the surface of the polymer.(2,3) Such triclosan-incorporated polymers can be promoted for hospital use as fabric seat covers, tables, chairs, and clothing. We assessed the antibacterial efficacy of triclosan-incorporated polymer disks against 2 bacteria cultured in liquids in contact with the polymer. In spite of the relatively high concentrations of triclosan in the polymer, only some initial slowing of the bacterial growth rates was observed, followed by the absence of an antibacterial effect over extended periods. The triclosan at the surface of the disks dissolves into the liquids, and the rest of the triclosan, immobilized in the disks, does not contribute to the antibacterial effectiveness of triclosan-incorporated polymer. In light of recent studies, which have shown that triclosan acts on a specific target within the bacterial lipid synthesis pathway, triclosan-incorporated polymers may provide the ideal setting for resistant strains of bacteria to grow and thus should be used selectively in hospital environments.

Evaluation of the penetration test for bicyclists' helmets: comparative performance of hard shell and foam helmets.

A project was undertaken to evaluate the utility of the penetration test in the Australian Standard devoted to the testing of lightweight helmets for bicycle riders. The project revealed aspects of the protective performance of conventional hard shell helmets and recently developed helmets manufactured entirely from expanded polystyrene foam. Hard shell helmets were found to provide good performance in a range of loading conditions applied to them during testing. In contrast, foam helmets provided very poor resistance to concentrated loads produced during impacts with small, sharp objects but they had greater capacity than hard helmets to withstand distributed loads produced during impacts with flatter objects. The presence of the penetration test in the Australian Standard was determined to have produced the good all round performance of hard helmets which met its requirements. Two tests were proposed as alternatives to the penetration test. They would evaluate foam and hard helmets on equal terms at the cost of abandoning the requirement of helmets to withstand concentrated loads.

Synthetic materials for platelet quality control.

At present, the quality control of platelet counting by semi-automated and automated methods does not meet ideal standards. Controls prepared from human or animal platelets have limited stability, and some synthetic platelet controls that are available do not have the size distribution of fresh platelets. The platelet control materials described here are wholly synthetic; however, their particle size distribution is like that of normal human platelets, and the dispersing medium has the viscosity and surface tension of plasma. Two types of products are described. The first type are dilutions of the synthetic platelets which are handled like 3000-fold dilutions of platelet-rich plasma and are intended for direct use on instruments like the Coulter ZBI. The two dilution levels gave counts of about 50,000 and 200,000/microL on the Coulter ZBI and were found to be stable for at least 30 days at - 20C, 4C, and 37C, and at least eight months at 25C. The second type of product is handled like whole blood and is intended for direct use on instruments like the Coulter Model S-Plus. This product gave counts of about 200,000/microL and was found to be stable for at least 120 days at - 20C, 4C, 25C, and 37C. Freezing at - 20C produced some aggregates that dispersed after thawing and standing for several days prior to testing.

Serologic procedures performed in hydrophilized polystyrene cuvettes and borate glass tubes: a comparative study.

Serologic procedures were performed in parallel using hydrophilized polystyrene cuvettes and conventional glass test tubes. Consistent and comparable results were obtained with both containers. No significant differences in antibody titer, specificity, neutralization, or elution were observed. The effect of a proteolytic enzyme on red blood cell antigen was not altered by the hydrophilized plastic tubes. There was no difference in the stability of immune sera stored in glass or plastic at 4 degrees C and--30 degrees C. However, hemolysis of stored red blood cells was significantly slower in the hydrophilized plastic cuvettes.

On the constancy in composition of polystyrene and polymethylmethacrylate plastics.

Variations in the atomic composition, and mass and electron densities of polystyrene and polymethylmethacrylate (PMM) plastics were assessed from experimentally determined mass attenuation coefficients for 125I and 137Cs gamma rays. The means and standard deviations in the mass densities of 16 samples of PMM and 10 samples of polystyrene were found to be 1.174 +/- 1.4% and 1.042 +/- 0.6% g/cm3, respectively. Based upon transmission measurements on various solutions of ethyl alcohol in water, the standard deviations in the effective atomic numbers of PMM and polystyrene were determined to be 0.77% and 1.3%, respectively. Based upon experimentally determined mass attenuation coefficients for 137Cs, the standard deviations in electron density for PMM and polystyrene were 0.5% and 1.2% respectively. Similar measurements on tap water and two grades of distilled water failed to detect any differences in atomic composition.