Radiographic Evaluation of Post-core Restorations fabricated by Dental Students at Jazan University.

AIM: Post and core procedures are important clinical methods in routine dental practice. The present research aimed to radiographically assess the quality of post seating performed by undergraduate students at the College of Dentistry, Jazan University. MATERIALS AND METHODS: A total of 343 periapical X-rays of cemented posts (170 from males and 173 from females) were assessed. The assessment covered tooth type, arch, gender, type of post, length of post in relation to the crown and root lengths, the presence of any abnormality in post space, status of the remaining gutta-percha (GP), and the presence or absence of spaces between the end of post and GP. Data were analyzed using the Statistical Package for the Social Sciences (SPSS) program (version 21), and associations between variables were determined using chi-squared or Fisher's exact tests. RESULTS: Maxillary teeth were the most frequently restored with posts, and the majority (41%) comprised incisors. Similarly, glass fiber post (69%) and taper-shaped posts (86%) were the most used posts. The majority of posts (81.6%) featured a width one-thirds that of the root. Lengths of posts were twice (58%) or equal to (51%) crown and root length respectively. More than 55% of cases presented 3 to 5 mm of GP at their apical portion, and 29% reached more than 5 mm. Approximately 5 to 8% of assessed cases revealed widening of periodontal ligaments, presence of periapical pathologies, and deviation of posts from the canal wall. Most cases (75%) showed the absence of space between GP and the post end. CONCLUSION: Qualities of assessed post and core restorations conducted by the 6th year dental students were clinically acceptable. CLINICAL SIGNIFICANCE: Periodic evaluation to determine the quality of delivered treatments is a vital cue for health service authorities. This evaluation will improve quality of services and treatments provided by dental students to their patients under the supervision of the faculty. Results obtained will also provide authorities with a clear feedback about academic infrastructure.

Restauración clínico-quirúrgica integral en fractura complicada de corona y raíz del tercio medio en visita única / Integral clinical-surgical restoration in complicated fracture of crown and root of the half third in unique visit

Introducción: Las fracturas coronales complicadas en premolares y molares, que involucran también compromiso radicular ocurren usualmente en dientes plenamente formados y engastados en hueso alveolar ya maduro. Pueden alcanzar cualquier segmento de raíz, resultando las de peor pronóstico aquellas que alcanzan el tercio medio radicular, debido a los altos riesgos de aparición de reabsorciones externas asociadas a las terapias convencionales para tratar las mismas. Objetivo: Describir un caso de restauración de una fractura corono-radicular del tercio medio en un primer premolar superior derecho, utilizando el método abierto, en una sola visita. Presentación del caso: Paciente de 58 años, masculino, con antecedentes de salud, que acude a consulta tras sufrir traumatismo dentoalveolar consistente con fractura complicada de corona y raíz del tercio medio, corroborado clínica y radiográficamente. Requirió cementación de perno, reconstrucción del tercio radicular, conformación de muñón y estabilización para el logro de la restauración integral. Todo se realizó en una sola visita. Conclusiones: La restauración clínico-quirúrgica integral en fractura complicada de corona y raíz del tercio medio es una alternativa factible de realizar en una sola visita, que garantiza una rápida recuperación de las funciones buco-dentales(AU)

Introduction: Complicated coronal fractures in premolars and molars, also involving radicular affection occur in completely formed teeth embedded in matured alveolar bone. They can reach any root segment, resulting in the worst prognosis those reaching the radicular third medial, due to the high risks of appearance of external resorption associated with conventional therapies to treat them. Objective: To describe a case of restoration of a crown- third medial radicular fracture in a first right upper premolar, using the open method, in one visit. Case presentation: A 58 year-old male patient, with a healthy past, arriving to the consulting room after suffering a consistent dentoalveolar trauma with a complicated crown and root fracture of third medial, clinically and radiographically confirmed. It required pin cementing, reconstruction of radicular third medial, stump conformation and stabilization for the achievement of an integral restoration. Everything was done in one visit. Conclusions: The comprehensive clinical-surgical restoration in complicated crown and root fractures of the third medial is a feasible alternative to be performed in one visit, which ensures a rapid recovery of oral functions(AU)

Accuracy of cast posts fabricated by the direct and the indirect techniques.

STATEMENT OF PROBLEM: Patterns for custom cast posts and cores can be fabricated either by the direct or the indirect technique. Which technique is more accurate is unknown. PURPOSE: The purpose of this in vitro study was to investigate the effect of pattern fabrication technique on the accuracy of post fit. MATERIAL AND METHODS: Ten intact extracted premolar teeth with a single canal and similar dimensions received root canal treatment. The teeth were sectioned 2 mm above the cementoenamel junction. A total of 20 cast post and core patterns, 2 for each tooth, were fabricated, 10 with the direct technique and 10 with the indirect technique. Patterns were cast to produce 20 cast post and cores. Each tooth was scanned using a microcomputed tomography (µCT) system with a resolution of 14.5 µm, once with the post of the direct technique and once with the post of the indirect technique. Ct analyzer software was used to calculate the overall space between the post and canal walls and the space areas in 3 different standardized sections. The Student paired t test was used to determine any significant difference in the scores of the groups. RESULTS: The overall space between the canal walls and posts made with the direct technique ranged between 7.86 and 17.39 mm(3), with a mean value of 12.25 mm(3), whereas with the indirect technique, the space ranged between 6.68 and 18.02 mm(3), with a mean of 11.92 mm(3). No significant differences were found between the results of either technique (P>.05). CONCLUSIONS: Within the limitations of this study, neither the indirect nor direct pattern fabrication technique influenced the accuracy of post fitting.

Coverage of denuded labial bone resulting from post space preparation with a free gingival autograft: lessons learnt.

Rehabilitation of endodontically treated teeth by post and core preparation is a common procedure in day to day dental practice. However, in some instances, post space preparation can produce excessive frictional heat leading to significant damage to the attachment apparatus of the tooth as well as to the overlying soft tissue. This report describes a case of mucosal dehiscence arising due to trauma induced by inadvertent post space preparation. The denuded mucosa was restored to its physiological position with the help of free gingival autograft obtained from the palatal donor site. The aesthetic results obtained were excellent and have been stable for a period of 2 years.

A technique to ensure the reproducibility of a cast post and core.

The post-and-core pattern duplication technique is a simple, cost-effective, and accurate method of ensuring the reproducibility of a cast post and core. An acrylic resin pattern is fabricated for an endodontically treated tooth. The post portion of the pattern is duplicated with a polyvinyl siloxane impression material in the lower compartment of a container. The core portion is then duplicated with a polyether impression material in the upper compartment. After the original pattern has been retrieved, the duplicate resin pattern is fabricated in the provided space. This technique will improve efficiency if damage or loss of the pattern or the actual cast post and core occurs.

Evaluation of Cerec endocrowns: a preliminary cohort study.

This study aimed to evaluate clinical qualities and evolution on ceramic endocrowns produced with the Cerec 3D (Sirona). Endocrowns were produced in a hospital environment and evaluated according to the FDI criteria on the day of placement and 6 months afterwards. Each item was graded from 1 (good) to 5 (bad). A global score, as well as a score for aesthetics, functioning and biological integration was assessed for each evaluation. During the 6-month evaluation period, the scores were always related to good clinical quality, except for single crown restoration. The scores did not change between the two periods of evaluation.

Influence of instrumentation techniques and irrigating solutions on bond strength of glass fiber posts to root dentin.

This study sought to evaluate how instrumentation techniques and irrigating solutions affected the bond strength of glass fiber posts. For this study, 80 human maxillary central incisors were selected. Endodontic access was obtained, root canal length was measured, and the coronal third was prepared using Gates-Glidden drills. The specimens were embedded in acrylic resin and randomly assigned to 8 groups (n = 10): manual instrumentation only (Group 1), rotary instrumentation only (Group 2), irrigation with 2.5% sodium hypochlorite (NaOCl) (Group 3), irrigation with 2% chlorhexidine (CHX) (Group 4), manual instrumentation and irrigation with 2.5% NaOCl (Group 5), manual instrumentation and irrigation with 2% CHX (Group 6), rotary instrumentation and irrigation with 2.5% NaOCl (Group 7), and rotary instrumentation and irrigation with 2% CHX (Group 8). Specimens in Groups 5-8 also received a 1 minute final rinse with ethylenediaminetetraacetic acid. Canals were filled and the specimens stored for 30 days in distilled water. The restoration material was removed down to the apical 4 mm of the root canal. The glass fiber posts were luted with resin cement and stored for 24 hours at 37°C. Specimens were subjected to a tensile strength test at a constant speed of 1.0 mm/minute and a load of 2,000 kgf. The results were analyzed by analysis of variance and Tukey's test. Irrigation with 2.5% NaOCl reduced the bond strength of fiber posts significantly (P < 0.01), while CHX showed no effect (P > 0.05). It was concluded that irrigation with 2.5% NaOCl has a negative effect on micromechanical retention of glass fiber posts, whether manual or rotary instrumentation is used.

The role of resin cement on bond strength of glass-fiber posts luted into root canals: a systematic review and meta-analysis of in vitro studies.

Because there are several ways to cement glass-fiber posts (GFPs) into root canals, there is no consensus on the best strategy to achieve high bond strengths. A systematic review was conducted to determine if there is difference in bond strength to dentin between regular and self-adhesive resin cements and to verify the influence of several variables on the retention of GFPs. This report followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. In vitro studies that investigated the bond strength of GFPs luted with self-adhesive and regular resin cements were selected. Searches were carried out in the PubMed and Scopus databases. No publication year or language limit was used, and the last search was done in October 2012. A global comparison was performed between self-adhesive and regular resin cements. Two subgroup analyses were performed: 1) Self-adhesive × Regular resin cement + Etch-and-rinse adhesive and 2) Self-adhesive × Regular resin cement + Self-etch adhesive. The analyses were carried out using fixed-effect and random-effects models. The results showed heterogeneity in all comparisons, and higher bond strength to dentin was identified for self-adhesive cements. Although the articles included in this meta-analysis showed high heterogeneity and high risk of bias, the in vitro literature seems to suggest that use of self-adhesive resin cement could improve the retention of GFPs into root canals.

A flood tide of systematic reviews on endodontic posts: methodological assessment using of R-AMSTAR.

OBJECTIVES: To help the dental practitioner solve a specific clinical problem, systematic reviews (SRs) are seen as the best guide. In addition to the unmanageable quantity of SRs, however, one should be aware of their variable quality. The present review describes the methodological quality of SRs on postendodontic restorations to work out the value of these reviews for the dental practitioner. METHODOLOGY: SRs were searched in April 2012, independently and in triplicate. Post survival was used as measure of outcome. The methodological quality of included SRs was assessed with the Revised Assessment of Multiple Systematic Reviews (R-AMSTAR) checklist. Kappa statistics were used to assess reviewer agreement. RESULTS: Three hundred sixty-three papers were retrieved from the initial search. Ten SRs were included. One SR achieved a high R-AMSTAR score, whereas the other nine SRs achieved scores that indicate a substantial lack of methodological quality. Especially the items "grey literature," "combination of findings," "likelihood of publication bias," and conflict of interest" showed low R-AMSTAR scores. The three reviews with the highest R-AMSTAR scores tended to conclude that fewer failures occurred when using nonmetal posts. The reviewer agreement was excellent (kappa ranged from 0.79 to 0.85) in the R-AMSTAR classification. CONCLUSION: The approach presented revealed a lack of SRs with high methodological quality. Thus, no decisive conclusion can be drawn with respect to this topic. It appears that there is a trend for the superiority of fiber-reinforced posts. CLINICAL RELEVANCE: SRs must be of high methodological quality. This can be achieved by taking into consideration the results of this review. Improved methodological quality would make SRs more supportive for the general practitioner.

Accuracy of cast posts and cores using a new investigative method.

Generally, two techniques are used to fabricate a cast post and core (CPC): direct and indirect. To date, research has made no clear indication as to a comparative level of accuracy between the techniques. Therefore, the purpose of the current study was to compare the accuracy of two techniques to produce CPCs for posterior teeth using a new method. Nine endodontically treated human premolars were used for fabricating CPCs using the direct and indirect methods. A total of 18 CPCs were produced, two for each tooth, cast in high noble type IV gold. A silicone impression material was inserted into the root canals, followed by the CPCs. The remaining material in the space between the canal wall and the CPC was weighed using an electronic precision balance. By evaluating the weight of the silicon specimens, the accuracy and intimacy of fit were obtained. Since the number of samples was small, a Student t-test was used for statistical evaluation at a 90% confidence interval. The CPCs obtained by using each method were independently examined by two clinicians for proper fit. Power analysis indicated that for a 90% confidence interval and 0.8 power value, nine specimens would be necessary to achieve a statistically meaningful test. The mean value for the weight of the nine specimens obtained using the direct method was 10.3 ± 2.6 mg, while the mean value for the corresponding specimens obtained using the indirect method was significantly smaller, 7.4 ± 2.3 mg. The Student t-test value was P = 0.006. The indirect method provided CPCs with a better fit and higher accuracy. The Student t-test demonstrated a significant difference between the direct and indirect procedures. The indirect method is a valuable technique for the dental practitioner when multiple posterior cast posts and cores are necessary or interocclusal space is limited.

Experimental strength of restorations with fibre posts at different stages, with and without using a simulated ligament.

The aim of this study was to analyse the strength and failure mode of teeth restored with fibre posts under retention and flexural-compressive loads at different stages of the restoration and to analyse whether including a simulated ligament in the experimental setup has any effect on the strength or the failure mode. Thirty human maxillary central incisors were distributed in three different groups to be restored with simulation of different restoration stages (1: only post, 2: post and core, 3: post-core and crown), using Rebilda fibre posts. The specimens were inserted in resin blocks and loaded by means of a universal testing machine until failure under tension (stage 1) and 50º flexion (stages 2-3). Half the specimens in each group were restored using a simulated ligament between root dentine and resin block and the other half did not use this element. Failure in stage 1 always occurred at the post-dentine interface, with a mean failure load of 191·2 N. Failure in stage 2 was located mainly in the core or coronal dentine (mean failure load of 505·9 N). Failure in stage 3 was observed in the coronal dentine (mean failure load 397·4 N). Failure loads registered were greater than expected masticatory loads. Fracture modes were mostly reparable, thus indicating that this post is clinically valid at the different stages of restoration studied. The inclusion of the simulated ligament in the experimental system did not show a statistically significant effect on the failure load or the failure mode.

Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents.

PURPOSE: The purpose of this study was to compare the tensile strength of commercially pure titanium dowels and cores cemented with zinc phosphate or resin cements. METHODS: Twenty-one extracted human canines were endodontically treated. The root preparations were accomplished using Largo reamers (10mm in depth and 1.7 mm in diameter). Acrylic resin patterns for the dowel and cores were made, and specimens were cast in commercially pure titanium (n=7) and divided in three groups: TZ-CP Ti dowels luted with zinc phosphate luting agent, TP-CP Ti dowels luted with Panavia F and TR-CP Ti dowels luted with RelyX U100. Tensile strengths were measured in a universal testing machine at a crosshead speed of 0.5mm/min. The results (N) were statistically analyzed by ANOVA and Tukey tests (α=0.01). RESULTS: The ANOVA indicated that there were significant differences among the groups tested. A Tukey multiple comparison procedure was performed and revealed statistically significant higher retention values for the dowel luted with RelyX U100 when compared with zinc phosphate or Panavia F. CONCLUSION: Cast commercially pure titanium dowels and cores fixed with RelyX U100 cement presented superior bond strength retention when compared to zinc phosphate and Panavia F.

Adhesive cementation of zirconia posts to root dentin: evaluation of the mechanical cycling effect.

This study evaluated the effect of mechanical cycling on the bond strength of zirconia posts to root dentin. Thirty single-rooted human teeth were transversally sectioned to a length of 16 mm. The canal preparation was performed with zirconia post system drills (CosmoPost, Ivoclar) to a depth of 12 mm. For post cementation, the canals were treated with total-etch, 3-steps All-Bond 2 (Bisco), and the posts were cemented with Duolink dual resin cement (Bisco). Three groups were formed (n = 10): G1 - control, no mechanical cycling; G2 - 20,000 mechanical cycles; G3 - 2,000,000 mechanical cycles. A 1.6-mm-thick punch induced loads of 50 N, at a 45 degrees angle to the long axis of the specimens and at a frequency of 8 Hz directly on the posts. To evaluate the bond strengths, the specimens were sectioned perpendicular to the long axis of the teeth, generating 2-mm-thick slices, approximately (5 sections per teeth), which were subjected to the push-out test in a universal testing machine at a 1 mm/min crosshead speed. The push-out bond strength was affected by the mechanical cycling (1-way ANOVA, p = .0001). The results of the control group (7.7 +/- 1.3 MPa) were statistically higher than those of G2 (3.9 +/- 2.2 MPa) and G3 (3.3 +/- 2.3 MPa). It was concluded that the mechanical cycling damaged the bond strength of zirconia posts to root dentin.

Prevalence and risk factors of apical periodontitis in endodontically treated teeth in a selected population of Brazilian adults.

The aim of this study was to assess the prevalence and risk factors of apical periodontitis in endodontically treated teeth in a selected population of Brazilian adults. A total of 1,372 periapical radiographs of endodontically treated teeth were analyzed based on the quality of root filling, status of coronal restoration and presence of posts associated with apical periodontitis (AP). Data were analyzed statistically using odds ratio, confidence intervals and chi-square test. The prevalence of AP with adequate endodontic treatment was low (16.5%). This percentage dropped to 12.1% in cases with adequate root filling and adequate coronal restoration. Teeth with adequate endodontic treatment and poor coronal restoration had an AP prevalence of 27.9%. AP increased to 71.7% in teeth with poor endodontic treatment associated with poor coronal restoration. When poor endodontic treatment was combined with adequate coronal restoration, AP prevalence was 61.8%. The prevalence of AP was low when associated with high technical quality of root canal treatment. Poor coronal restoration increased the risk of AP even when endodontic treatment was adequate (OR=2.80; 95%CI=1.87-4.22). The presence of intracanal posts had no influence on AP prevalence.

[Prevalence of fixed prosthesis-related periodontitis in Senegal]. / Prévalence de la prothèse fixèe et des parodontites apicales associées au Sénégal.

The purpose of this study was to determine radiographically the prevalence of periapical periodontitis in teeth restored with crown in a Senegalese population. Full mouth periapical radiographs were obtained from 208 consecutive adult patients (6234 teeth) presenting as new patients to the Dental Service of the University. The presence of crown restorations, the periapical status and technical quality of root fillings associated were evaluated. 7.69% (n = 16) of patients had at least one tooth that was crowned. The total number of crowns assessed was 0.95% (n = 59). The molars were the teeth most crowned 40.67% (n = 24) followed by anterior teeth 30.50% (n = 18) and premolars 28.81% (n = 17). All the crowned teeth had previous root canal treatment of which only 16.94% (n = 10) were acceptable. 53 % (n = 32) of the teeth had apical periodontitis (PAI > 2). Unacceptable root fillings were associated with a higher prevalence of periapical disease (p < 0.05). Crown with a post extending more than 4 millimetres from the apex were associated with more periapical lesions 64.28% (p < 0.05). The results indicate a low prevalence of crowned teeth, an absence of vital preparation, a high prevalence of radiographic periapical disease and unacceptable root fillings associated.

Prevalence and technical quality of root fillings in Dakar, Senegal.

AIM: To examine the prevalence and technical quality of root fillings and the periapical status of root-filled teeth in a subpopulation of Dakar, Senegal. METHODOLOGY: Full-mouth periapical radiographs were obtained from 208 consecutive adults presenting as new patients to the Dental Service of the University. The occurrence and technical quality of root fillings were assessed for each root according to the apical extent of the root fillings and its density. The periapical status was evaluated using the Periapical Index Scoring System with a PAI > 2 indicating periapical disease. The presence of coronal restorations and posts was also noted. Statistical analysis was performed with the chi-square test with a significance level set at P < 0.05%. RESULTS: Of the 6234 teeth examined, 2.6% were root filled. A PAI > 2 was associated with 56.1% of the filled roots. Only 17.7% of the root fillings were technically acceptable and 26.2% of these were associated with a PAI > 2. In roots with unacceptable root fillings, 62.5% had a PAI > 2. Unacceptable root fillings were associated with a higher prevalence of periapical disease (P < 0.001). A post was seen in 18.9% of the filled roots with 66.2% associated with a PAI > 2. A permanent coronal restoration was present in 78.5% of the filled roots, of which 50.7% had a PAI > 2 vs 75.7% for no permanent restoration. At least one periapical lesion was seen in 59.6% of the subjects. CONCLUSION: The results indicate a low prevalence of teeth with radiographic periapical disease, a low prevalence of root-filled teeth and a high prevalence of unacceptable root fillings.

Adhesive cementation of zirconia posts to root dentin: evaluation of the mechanical cycling effect

This study evaluated the effect of mechanical cycling on the bond strength of zirconia posts to root dentin. Thirty single-rooted human teeth were transversally sectioned to a length of 16 mm. The canal preparation was performed with zirconia post system drills (CosmoPost, Ivoclar) to a depth of 12 mm. For post cementation, the canals were treated with total-etch, 3-steps All-Bond 2 (Bisco), and the posts were cemented with Duolink dual resin cement (Bisco). Three groups were formed (n = 10): G1 - control, no mechanical cycling; G2 - 20,000 mechanical cycles; G3 - 2,000,000 mechanical cycles. A 1.6-mm-thick punch induced loads of 50 N, at a 45° angle to the long axis of the specimens and at a frequency of 8 Hz directly on the posts. To evaluate the bond strengths, the specimens were sectioned perpendicular to the long axis of the teeth, generating 2-mm-thick slices, approximately (5 sections per teeth), which were subjected to the push-out test in a universal testing machine at a 1 mm/min crosshead speed. The push-out bond strength was affected by the mechanical cycling (1-way ANOVA, p = .0001). The results of the control group (7.7 ± 1.3 MPa) were statistically higher than those of G2 (3.9 ± 2.2 MPa) and G3 (3.3 ± 2.3 MPa). It was concluded that the mechanical cycling damaged the bond strength of zirconia posts to root dentin.

Prevalence and risk factors of apical periodontitis in endodontically treated teeth in a selected population of Brazilian adults

The aim of this study was to assess the prevalence and risk factors of apical periodontitis in endodontically treated teeth in a selected population of Brazilian adults. A total of 1,372 periapical radiographs of endodontically treated teeth were analyzed based on the quality of root filling, status of coronal restoration and presence of posts associated with apical periodontitis (AP). Data were analyzed statistically using odds ratio, confidence intervals and chi-square test. The prevalence of AP with adequate endodontic treatment was low (16.5 percent). This percentage dropped to 12.1 percent in cases with adequate root filling and adequate coronal restoration. Teeth with adequate endodontic treatment and poor coronal restoration had an AP prevalence of 27.9 percent. AP increased to 71.7 percent in teeth with poor endodontic treatment associated with poor coronal restoration. When poor endodontic treatment was combined with adequate coronal restoration, AP prevalence was 61.8 percent. The prevalence of AP was low when associated with high technical quality of root canal treatment. Poor coronal restoration increased the risk of AP even when endodontic treatment was adequate (OR=2.80; 95 percentCI=1.87-4.22). The presence of intracanal posts had no influence on AP prevalence.

O objetivo deste estudo foi avaliar a prevalência e os fatores de risco da periodontite apical (PA) em dentes com tratamento endodôntico em seleta população adulta do Brasil. Um total de 1.372 radiografias periapicais de dentes com tratamento endodôntico foi analisado, considerando-se a qualidade da obturação, o estado da restauração coronária e a presença de pinos intrarradiculares, associados com a PA. Os dados foram analisados estatisticamente empregando-se odds ratio, intervalos de confiança e teste do qui-quadrado. A prevalência de PA associada a tratamento endodôntico adequado foi baixa (16,5 por cento). Este número reduziu-se a 12,1 por cento quando se considerou obturação e restauração coronária adequadas. Os dentes com tratamento endodôntico adequado, porém com restauração coronária inadequada apresentaram prevalência de PA igual a 27,9 por cento. A PA aumentou para 71,7 por cento nos dentes com tratamento endodôntico e restauração coronária inadequados. Quando o tratamento endodôntico inadequado foi combinado com restaurações coronárias adequadas encontrou-se 61,8 por cento de PA. A prevalência de PA foi baixa quando associada com a elevada qualidade técnica do tratamento endodôntico. A restauração coronária deficiente aumentou o risco de PA mesmo na presença de adequado tratamento endodôntico. A presença de pinos intrarradiculares não influenciou a prevalência de PA.

Tensile bond strength of glass fiber posts luted with different cements.

Proper selection of the luting agent is fundamental to avoid failure due to lack of retention in post-retained crowns. The objective of this study was to investigate the tensile bond strength and failure mode of glass fiber posts luted with different cements. Glass fiber posts were luted in 40 mandibular premolars, divided into 4 groups (n = 10): Group 1--resin-modified glass ionomer RelyX Luting; Group 2--resin-modified glass ionomer Fuji Plus; Group 3--resin cement RelyX ARC; Group 4--resin cement Enforce. Specimens were assessed by tensile strength testing and light microscopy analysis for observation of failure mode. The tensile bond strength values of each group were compared by ANOVA and Tukey test. The significance level was set at 5%. The failure modes were described as percentages. The following tensile strength values were obtained: Group 1--247.6 N; Group 2--256.7 N; Group 3--502.1 N; Group 4--477.3 N. There was no statistically significant difference between Groups 1 and 2 or between Groups 3 and 4, yet the resin cements presented significantly higher tensile bond strength values than those presented by the glass ionomer cements. Group 1 displayed 70% of cohesive failures, whereas Groups 2, 3 and 4 exhibited 70% to 80% of adhesive failures at the dentin-cement interface. We concluded that resin cements and glass ionomer cements are able to provide clinically sufficient retention of glass fiber posts, and that glass ionomer cements may be especially indicated when the application of adhesive techniques is difficult.