Cemented is not superior to cementless total knee arthroplasty for complications: a propensity score matched analysis.

INTRODUCTION: There is continued debate regarding the survivorship and revision rate of cementless versus cemented total knee arthroplasty (TKA) prostheses. This includes the assessment of early revision surgery due to aseptic loosenings and periprosthetic joint infections (PJIs). Studies have not always taken into account the impact of comorbidities, such as diabetes, obesity, and tobacco. Therefore, we compared revisions in a large population of patients undergoing cemented or cementless TKAs at 90 days, 1 year, and 2 years. METHODS: A review of an administrative claims database was used to identify patients undergoing primary TKA, either cementless (n = 8,890) or cemented (n = 215,460), from October 1, 2015 to October 31, 2020. Revision surgery for PJI and aseptic loosening were identified with diagnosis and associated procedural codes at 90 days, 1 year, and 2 years and then compared between groups. A propensity matched-analysis was performed for age, sex, Charles Comorbidity Index (CCI) > 3, alcohol abuse, tobacco use, obesity, and diabetes. Chi square tests assessed statistical significance of differences in the matched cohorts using odds ratios (ORs) with 95% confidence intervals (CIs). A P < 0.05 was defined as statistically significant. RESULTS: Cementless TKA was associated with similar revisions rates due to PJIs at 90 days (OR, 1.04, 95% CI 0.79-1.38, p = 0.83), 1 year (OR, 0.93, 95% CI 0.75-1.14, p = 0.53, and 2 years (OR, 0.87, 95% CI 0.73-1.05, p = 0.17) in comparison to the cemented TKA cohort. The odds ratio of revision due to aseptic loosening was similar as well at 90 days (OR, 0.67, 95% CI 0.34-1.31, 0.31), 1 year (OR, 1.09, 95% CI 0.73-1.61, p = 0.76), and 2 years (OR, 1.00, 95% CI 0.73-1.61, p = 0.99). CONCLUSIONS: This study found a comparable risk of PJI and aseptic loosening in cementless and cemented TKA when controlling for several comorbidities, such as tobacco, diabetes, and alcohol. Therefore, with proper patient selection, cementless TKAs can be performed with expectation of low risks of infections and aseptic loosenings.

Cemented Versus Cementless Femoral Fixation for Total Hip Arthroplasty Following Osteoarthritis.

BACKGROUND: The mode of femoral fixation for primary total hip arthroplasty (THA) is undetermined, with reported outcomes favoring different fixation methods. This study aimed to compare postoperative complications between cemented and cementless fixation at 90 days, 1 year, and 2 years in patients aged 65 years of age and older undergoing THA for osteoarthritis. METHODS: Using an all-payer, national database, patients 65 years and older undergoing primary THA, either with cementless (n = 56,701) or cemented (n = 6,283) femoral fixation for osteoarthritis were identified. A 1:1 propensity-matched analysis for age, sex, comorbidity index, alcohol abuse, tobacco use, obesity, and diabetes was performed, resulting in n = 6,283 patients in each cohort. Postoperative outcomes, including postoperative periprosthetic joint infection, aseptic revision, surgical site infection, pulmonary embolism, venous thromboembolism, wound complications, dislocation, periprosthetic fracture, and aseptic loosening were assessed. RESULTS: The cemented cohort had higher rates of infection (4.5 versus 0.8%, odds ratio [OR] 5.9, 95% confidence interval [CI] 4.33 to 7.93, P < .001), aseptic revision (2.9 versus 2.0%, OR 1.47, 95% CI 1.17 to 1.85, P = .001), venous thromboembolism (1.8 versus 1.3%, OR 1.40, 95% CI 1.05 to 1.87, P < .001), and aseptic loosening (1.5 versus 0.7%, OR 2.31, 95% CI 1.60 to 3.32, P < .001) at 90-days. At 1 and 2 years, the cemented cohort had higher rates of infection, aseptic revision, and aseptic loosening (all P < .001). Rates of periprosthetic fracture were similar at all time points (all P < .001). CONCLUSIONS: Cemented fixation had higher rates of infection, aseptic loosening, and aseptic revision. This finding supports the current use of cementless fixation, but the ultimate decision regarding fixation type should be based on the proper optimization of the patient's comorbidities and bone quality.

Should patient age thresholds dictate fixation strategy in total hip arthroplasty?

AIMS: Total hip arthroplasty (THA) is a very successful and cost-effective operation, yet debate continues about the optimum fixation philosophy in different age groups. The concept of the 'cementless paradox' and the UK 'Getting it Right First Time' initiative encourage increased use of cemented fixation due to purported lower revision rates, especially in elderly patients, and decreased cost. METHODS: In a high-volume, tertiary referral centre, we identified 10,112 THAs from a prospectively collected database, including 1,699 cemented THAs, 5,782 hybrid THAs, and 2,631 cementless THAs. The endpoint was revision for any reason. Secondary analysis included examination of implant survivorship in patients aged over 70 years, over 75 years, and over 80 years at primary THA. RESULTS: Cemented fixation had the lowest implant survival in all age groups, with a total ten-year survivorship of 97.0% (95% confidence interval (CI) 95.8 to 97.8) in the cemented group, 97.6% (95% CI 96.9 to 98.1) in the hybrid group, and 97.9% (95% CI 96.9 to 98.6) in the cementless group. This was not statistically significant (p = 0.092). There was no age group where cemented fixation outperformed hybrid or cementless fixation. CONCLUSION: While all fixation techniques performed well at long-term follow-up, cemented fixation was associated with the lowest implant survival in all age groups, including in more elderly patients. We recommend that surgeons should carefully monitor their own outcomes and use fixation techniques that they are familiar with, and deliver the best outcomes in their own hands. Cite this article: Bone Joint J 2022;104-B(2):206-211.

The effect of uncemented acetabular liner geometry and lip size on the risk of revision for instability or loosening : a study on 202,511 primary hip arthroplasties from the National Joint Registry.

AIMS: The aim of this study was to determine if uncemented acetabular polyethylene (PE) liner geometry, and lip size, influenced the risk of revision for instability or loosening. METHODS: A total of 202,511 primary total hip arthroplasties (THAs) with uncemented acetabular components were identified from the National Joint Registry (NJR) dataset between 2003 and 2017. The effect of liner geometry on the risk of revision for instability or loosening was investigated using competing risk regression analyses adjusting for age, sex, American Society of Anesthesiologists grade, indication, side, institution type, surgeon grade, surgical approach, head size, and polyethylene crosslinking. Stratified analyses by surgical approach were performed, including pairwise comparisons of liner geometries. RESULTS: The distribution of liner geometries were neutral (39.4%; 79,822), 10° (34.5%; 69,894), 15° (21.6%; 43,722), offset reorientating (2.8%; 5705), offset neutral (0.9%; 1,767), and 20° (0.8%; 1,601). There were 690 (0.34%) revisions for instability. Compared to neutral liners, the adjusted subhazard ratios of revision for instability were: 10°, 0.64 (p < 0.001); 15°, 0.48 (p < 0.001); and offset reorientating, 1.6 (p = 0.010). No association was found with other geometries. 10° and 15° liners had a time-dependent lower risk of revision for instability within the first 1.2 years. In posterior approaches, 10° and 15° liners had a lower risk of revision for instability, with no significant difference between them. The protective effect of lipped over neutral liners was not observed in laterally approached THAs. There were 604 (0.3%) revisions for loosening, but no association between liner geometry and revision for loosening was found. CONCLUSION: This registry-based study confirms a lower risk of revision for instability in posterior approach THAs with 10° or 15° lipped liners compared to neutral liners, but no significant difference between these lip sizes. A higher revision risk is seen with offset reorientating liners. The benefit of lipped geometries against revision for instability was not seen in laterally approached THAs. Liner geometry does not seem to influence the risk of revision for loosening. Cite this article: Bone Joint J 2021;103-B(12):1774-1782.

Acetabular complications are the most common cause for revision surgery following proximal femoral endoprosthetic replacement : what is the best bearing option in the primary and revision setting?

AIMS: Proximal femoral endoprosthetic replacements (PFEPRs) are the most common reconstruction option for osseous defects following primary and metastatic tumour resection. This study aimed to compare the rate of implant failure between PFEPRs with monopolar and bipolar hemiarthroplasties and acetabular arthroplasties, and determine the optimum articulation for revision PFEPRs. METHODS: This is a retrospective review of 233 patients who underwent PFEPR. The mean age was 54.7 years (SD 18.2), and 99 (42.5%) were male. There were 90 patients with primary bone tumours (38.6%), 122 with metastatic bone disease (52.4%), and 21 with haematological malignancy (9.0%). A total of 128 patients had monopolar (54.9%), 74 had bipolar hemiarthroplasty heads (31.8%), and 31 underwent acetabular arthroplasty (13.3%). RESULTS: At a mean 74.4 months follow-up, the overall revision rate was 15.0%. Primary malignancy (p < 0.001) and age < 50 years (p < 0.001) were risk factors for revision. The risks of death and implant failure were similar in patients with primary disease (p = 0.872), but the risk of death was significantly greater for patients who had metastatic bone disease (p < 0.001). Acetabular-related implant failures comprised 74.3% of revisions; however, no difference between hemiarthroplasty or arthroplasty groups (p = 0.209), or between monopolar or bipolar hemiarthroplasties (p = 0.307), was observed. There was greater radiological wear in patients with longer follow-up and primary bone malignancy. Re-revision rates following a revision PFEPR was 34.3%, with dual-mobility bearings having the lowest rate of instability and re-revision (15.4%). CONCLUSION: Hemiarthroplasty and arthroplasty PFEPRs carry the same risk of revision in the medium term, and is primarily due to acetabular complications. There is no difference in revision rates or erosion between monopolar and bipolar hemiarthroplasties. The main causes of failure were acetabular wear in the hemiarthroplasty group and instability in the arthroplasty group. These risks should be balanced and patient prognosis considered when contemplating the bearing choice. Dual-mobility, constrained bearings, or large diameter heads (> 32 mm) are recommended in all revision PFEPRs. Cite this article: Bone Joint J 2021;103-B(10):1633-1640.

Radiolucent lines do not affect the longevity of highly cross-linked polyethylene cemented components in total hip arthroplasty.

AIMS: We aimed to evaluate the long-term outcome of highly cross-linked polyethylene (HXLPE) cemented acetabular components and assess whether any radiolucent lines (RLLs) which arose were progressive. METHODS: We retrospectively reviewed 170 patients who underwent 187 total hip arthroplasties at two hospitals with a minimum follow-up of ten years. All interventions were performed using the same combination of HXLPE cemented acetabular components with femoral stems made of titanium alloy. Kaplan-Meier survival analysis was performed for the primary endpoint of acetabular component revision surgery for any reason and secondary endpoint of the appearance of RLLs. RLLs that had appeared once were observed over time. We statistically assessed potential relationships between RLLs and a number of factors, including the technique of femoral head autografting and the Japanese Orthopaedic Association score. RESULTS: The mean follow-up period was 13.0 years (10.0 to 16.3). Femoral head autografting was performed on 135 hips (72.2%). One acetabular component was retrieved because of deep infection. No revision was performed for the aseptic acetabular loosening. The Kaplan-Meier survival curve for the primary and secondary endpoints were 98.2% (95% confidence interval (CI) 88.6% to 99.8%) and 79.3% (95% CI 72.8% to 84.6%), respectively. RLLs were detected in 38 hips (21.2%), at a mean of 1.7 years (1 month to 6 years) postoperatively. None of the RLLs were progressive, and the presence of RLLs did not show a significant association with the survival and clinical score. RLLs were more frequently observed in hips without femoral head autografts than in those with autografts. CONCLUSION: The use of HXLPE cemented acetabular components in total hip arthroplasty demonstrated excellent clinical outcomes after ten years, and no RLLs were progressive, and their presence did not affect the outcome. Femoral head autografting did not negatively impact the acetabular component survival or the appearance of RLLs. Cite this article: Bone Joint J 2021;103-B(10):1604-1610.

Tibial tray debonding from the cement mantle is associated with deformation of the backside of polyethylene tibial inserts.

AIMS: The aim of this study was to investigate whether wear and backside deformation of polyethylene (PE) tibial inserts may influence the cement cover of tibial trays of explanted total knee arthroplasties (TKAs). METHODS: At our retrieval centre, we measured changes in the wear and deformation of PE inserts using coordinate measuring machines and light microscopy. The amount of cement cover on the backside of tibial trays was quantified as a percentage of the total surface. The study involved data from the explanted fixed-bearing components of four widely used contemporary designs of TKA (Attune, NexGen, Press Fit Condylar (PFC), and Triathlon), revised for any indication, and we compared them with components that used previous generations of PE. Regression modelling was used to identify variables related to the amount of cement cover on the retrieved trays. RESULTS: A total of 114 explanted fixed-bearing TKAs were examined. This included 76 used with contemporary PE inserts which were compared with 15 used with older generation PEs. The Attune and NexGen (central locking) trays were found to have significantly less cement cover than Triathlon and PFC trays (peripheral locking group) (p = 0.001). The median planicity values of the PE inserts used with central locking trays were significantly greater than of those with peripheral locking inserts (205 vs 85 microns; p < 0.001). Attune and NexGen inserts had a characteristic pattern of backside deformation, with the outer edges of the PE deviating inferiorly, leaving the PE margins as the primary areas of articulation. CONCLUSION: Explanted TKAs with central locking mechanisms were significantly more likely to debond from the cement mantle. The PE inserts of these designs showed characteristic patterns of deformation, which appeared to relate to the manufacturing process and may be exacerbated in vivo. This pattern of deformation was associated with PE wear occurring at the outer edges of the articulation, potentially increasing the frictional torque generated at this interface. Cite this article: Bone Joint J 2021;103-B(12):1791-1801.

Association of Sex With Risk of 2-Year Revision Among Patients Undergoing Total Hip Arthroplasty.

Importance: The worldwide population is aging and includes more female individuals than male individuals, with higher rates of total hip arthroplasty (THA) among female individuals. Although research on this topic has been limited to date, several studies are currently under way. Objectives: To evaluate the association between sex and 2-year revision after THA. Design, Setting, and Participants: This cohort study used data from statewide databases in New York and California between October 1, 2015, and December 31, 2018. Patients 18 years or older with osteoarthritis who underwent THA and had sex recorded in the database were included in the analysis. Exposure: Total hip arthroplasty. Main Outcomes and Measures: The outcome of interest was the difference in early, all-cause revision surgery rates after primary THA between women and men. The association of sex with the revision rate was examined using Cox proportional hazards regression analysis. Results: Of 132 826 patients included in the study, 74 002 (55.7%) were women; the mean (SD) age was 65.9 (11.0) years, and the median follow-up time was 1.3 years (range, 0.0-3.0 years). The 2-year revision rate was 2.5% (95% CI, 2.4%-2.6%) among women and 2.1% (95% CI, 2.0%-2.2%) among men. After adjusting for demographic characteristics, comorbidities, and facility volume, a minimal clinically meaningful difference was observed in revision rates despite women having a higher risk of all-cause revision compared with men (hazard ratio, 1.16; 95% CI, 1.07-1.26; P < .001). The risk of revision was increased among women compared with men in the subgroup of patients who were younger than 55 years (hazard ratio, 1.47; 95% CI, 1.20-1.81; P < .001). Conclusions and Relevance: In this cohort study, no clinically meaningful difference in all-cause revision rates after primary THA was found between men and women at 2-year follow-up. The modest difference in the risk of revision between men and women in a small subgroup of patients younger than 55 years suggests that the risk of revision in this population should be studied further.

Influence of the femoral offset on the muscles passive resistance in total hip arthroplasty.

BACKGROUND: Soft tissue tension is treated as a crucial factor influencing the post-THA dislocation. The femoral offset is regarded as one of the major parameters responsible for the stabilization of the prosthesis. It is unclear which soft tissue is mostly affected by the offset changes. METHODS: A finite element model of the hip was created. The model comprised muscles, bones, a stem, the acetabular component and a liner. The muscles were modelled as a Hill-type musculo-tendon nonlinear springs. Nonlinear analyses of the hip flexion and internal rotation were performed for the two values of the femoral stem offset. RESULTS: We observed that the quadratus femoris and gluteus medius produce the largest resisting moment opposing the external load excreted by the surgeon during the intraoperative hip dislocation test. CONCLUSIONS: An increased femoral offset increases the stretching of the quadratus femoris muscle significantly and provides the growth of its initial passive force. This muscle serves as a stiff band, providing stabilisation of the hip prosthesis, measured during the simulated intraoperative test.

Dislocation of hemiarthroplasty after hip fracture is common and the risk is increased with posterior approach: result from a national cohort of 25,678 individuals in the Swedish Hip Arthroplasty Register.

Background and purpose - Reported revision rates due to dislocation after hemiarthroplasty span a wide range. Dislocations treated with closed reduction are rarely reported despite the fact that they can be expected to constitute most of the dislocations that occur. We aimed to describe the total dislocation rate on the national level, and to identify risk factors for dislocation.Patients and methods - We co-processed a national cohort of 25,678 patients in the Swedish Hip Arthroplasty Register, with the National Patient Register (NPR) and Statistics Sweden. Dislocation was defined as the occurrence of any ICD-10 or procedural code related to hip dislocation recorded in the NPR, with a minimum of 1-year-follow-up. In theory, all early dislocations should thereby be traced, including those treated with closed reduction only.Results - 366/13,769 (2.7%) patients operated on with direct lateral approach dislocated, compared with 850/11,834 (7.2%) of those with posterior approach. Posterior approach was the strongest risk factor for dislocation (OR = 2.7; 95% CI 2.3-3.1), followed by dementia (OR = 1.3; CI 1.1-1.5). The older the patients, the lower the risk of dislocation (OR = 0.98 per year of age; CI 0.98-1.0). Neither bipolar design nor cementless stems influenced the risk.Interpretation - The choice of posterior approach and dementia was associated with an increased dislocation risk. When hips treated with closed reduction were identified, the frequency of dislocation with use of direct lateral and posterior approach more than doubled and tripled, respectively, compared with when only revisions due to dislocation are measured.

Reduced postoperative morbidity in computer-navigated total knee arthroplasty: A retrospective comparison of 225,123 cases.

BACKGROUND: Total knee arthroplasty (TKA) is one of the most common elective surgical procedures in the United States, with more than 650,000 performed annually. Computer navigation technology has recently been introduced to assist surgeons with planning, performing, and assessing TKA bone cuts. The aim of this study is to assess postoperative complication rates after TKA performed using computer navigation assistance versus conventional methods. METHODS: The American College of Surgeons National Surgical Quality Improvement Program (NSQIP) database was queried for unilateral TKA cases from 2008 to 2016. The presence of the CPT modifier for use of computer navigation was used to separate cases of computer-navigated TKA from conventional TKA. Multivariate and propensity-matched logistic regression analyses were performed to control for demographics and comorbidities. RESULTS: There were 225,123 TKA cases included; 219,880 were conventional TKA (97.7%) and 5,243 were navigated (2.3%). Propensity matching identified 4,811 case pairs. Analysis demonstrated no significant differences in operative time, length of stay, reoperation, or readmission, and no differences in rates of post-op mortality at 30 days postoperatively. Compared to conventional cases, navigated cases were at lower risk of serious medical morbidity (18% lower, p = 0.009) within the first 30 days postoperatively. CONCLUSION: After controlling for multiple known risk factors, navigated TKA patients demonstrated lower risk for medical morbidity, predominantly driven by lower risk for blood transfusion. Given these findings, computer-navigation is a safe surgical technique in TKA.

Impact of physiologically shaped pancreatic stent for chronic pancreatitis.

Endoscopic pancreatic stenting is used to prevent main pancreatic duct obstruction and relieve painful symptoms of chronic pancreatitis. However, the stent typically needs to be exchanged and the rate of adverse events is high. Few studies have evaluated the effect of stent shape on those outcomes. We evaluated the adverse events, stent patency, and total medical cost within 90 days of patients who received an 8.5 French (Fr) physiologically shaped pancreatic stent by comparing these features with those associated with a conventional straight-type stent for ≥ 90 days. The total stent-related adverse event rate was significantly lower for the physiologically shaped pancreatic stent (physiologically shaped, 6.7% [2/30]; straight-type, 50.6% [44/87]; P < 0.001). Stent occlusion was significantly less frequent (P < 0.001) and the total medical costs were significantly lower (P = 0.002) for the physiologically shaped stent. The stent-related adverse event rate was significantly higher for the 10 Fr straight type stent than for the 8.5 Fr physiologically shaped stent (10 Fr, straight-type vs. 8.5 Fr, physiologically shaped: 36.1% [13/36] vs. 6.7% [2/30]; P = 0.007). In conclusion, a physiologically shaped pancreatic stent was superior to a straight-type stent in terms of the patency rate and medical costs.

Current Therapeutic Options in Aortic Stenosis.

Aortic stenosis is the most common valvular disease requiring valve replacement. Valve replacement therapies have undergone progressive evolution since the 1960s. Over the last 20 years, transcatheter aortic valve replacement has radically transformed the care of aortic stenosis, such that it is now the treatment of choice for many, particularly elderly, patients. This review provides an overview of the pathophysiology, presentation, diagnosis, indications for intervention, and current therapeutic options for aortic stenosis.

Minimum 15-year results of metasul 28-mm metal-on-metal total hip arthroplasty in patients younger than 50 years of age.

BACKGROUND: Some propitious mid- and long-term studies had been reported for MoM bearings; however, most studies have addressed specific patient groups rather than younger, active patients, who probably represent the most suitable population for investigations on wear and osteolysis. The purpose of this study to evaluate the long-term results of second-generation metal-on-metal cementless total hip arthroplasty (THA) in patients aged <50 years. METHODS: From December 1997 to January 2004, primary THA using a metal-on-metal bearing cementless implant was performed in 63 patients (72 hips) aged <50 years. The mean follow-up duration was 18.6 (range, 15.9-22.1) years, and the mean age at initial operation was 39 (range, 22-49) years. Clinical results, complications, survivorship, osteolysis, and aseptic loosening were evaluated. RESULTS: The mean Harris hip score and Western Ontario and McMaster Universities Arthritis Index scores were improved from 57.8 (range, 28-69) points and 73.4 (range, 63-94) points preoperatively to 91.7 (range, 80-100) points and 25.5 points (range, 17-38) points, respectively, at the last follow-up. Osteolysis lesions were found in 12 hips (acetabulum, 6 and femur, 6). The notching occurred on the femoral stem neck occurred in 12 hips. The mean serum cobalt and chromium concentrations were 2.3 (range, 0.2-10.6) µg/L and 1.7 (range, 0.4-8.1) µg/L, respectively, at a mean follow-up of 12.7 years in 32 patients (50.1%). The Kaplan-Meier survivorship curve analysis with revision for any reason as the endpoint revealed that 93.1% survived at 18.6 years' follow-up. CONCLUSIONS: Second-generation metal-on-metal cementless THA was found to produce satisfactory clinical and radiographic results with a low revision rate for osteolysis and aseptic loosening in patients aged less than 50 years.

The T Cell Repertoires from Nickel Sensitized Joint Implant Failure Patients.

Nickel (Ni2+) is one of the most common allergens, affecting around 10-15% of the general population. As the demand for orthopedic implant surgery rises, the number of surgical revisions due to joint implant failure also increases. There is evidence that some patients develop joint failure due to an immune response to a component of the implant, and we have found that Ni2+ is an especially important cause. Hence, understanding the mechanisms by which Ni2+ allergy induces joint implant failure becomes a critical research question. The structural basis of Ni2+ activation of pathogenic T cells is still not clear. The purpose of this study was to characterize Ni2+-reactive T cell repertoires derived from the peripheral blood of joint failure patients due to Ni2+ sensitization using single-cell sequencing techniques. We stimulated the proliferation of Ni2+ -reactive T cells from two implant failure patients in vitro, and sorted them for single-cell VDJ sequencing (10× genomics). We identified 2650 productive V-J spanning pairs. Both TCR α chains and ß chains were enriched. TRBV18 usage is the highest in the P7 CD4+ population (18.1%), and TRBV5-1 usage is the highest in the P7 CD8+ population (12.1%). TRBV19 and TRBV20-1 segments are present in a high percentage of both P7 and P9 sequenced T cells. Remarkably, the alpha and beta chain combination of TRAV41-TRBV18 accounts for 13.5% of the CD4+ population of P7 patient. Compared to current Ni specific T cell repertoire studies of contact dermatitis, the Vα and Vß usages of these joint implant failure patients were different. This could be due to the different availability of self-peptides in these two different tissues. However, TRBV19 (Vß17) was among frequently used TCR ß chains, which are common in previous reports. This implies that some pathogenic T cells could be similar in Ni2+ hypersensitivities in skin and joints. The alignment of the TCR CDR3ß sequences showed a conserved glutamic acid (Glu) that could potentially interact with Ni2+. The study of these Ni2+ specific TCRs may shed light on the molecular mechanism of T cell activation by low molecular weight chemical haptens.

Decreased complications but a distinctive fixation loosening mechanism of fully threaded headless cannulated screw fixation for femoral neck fractures in young adults.

BACKGROUND: Despite being a commonly encountered injury in orthopedic practice, controversy surrounds the methods of optimal internal fixation for femoral neck fractures (FNF) in young patients. The objective of the present study is to compare complication rates and failure mechanisms for surgical fixation of FNF using fully threaded headless cannulated screws (FTHCS) versus partial threaded cannulated screws (PTS) in young adults. METHODS: A total of 75 patients (18-65 years old) with FNF were prospectively treated with close reduction and internal fixation using three parallel FTHCS and compared to a historical control case-matched group (75 patients) with FNF treated by PTS fixation. After 2 years follow-up, rates of fixation failure (including varus collapse, fracture displacement, and femoral neck shortening), nonunion, and avascular necrosis of the femoral head (ANFH) were compared between the two cohorts. The demographic, follow-up information, and radiological images were assessed by independent blinded investigators. RESULTS: Patient demographics and fracture patterns were similar in the two patient groups. The overall fixation failure rates were 8% (6/75) in the FTHCS cohort, which was significantly lower than the 25.3% (19/75) seen in the PTS group. Rates of nonunion and ANFH were significantly lower in the FTHCS group when compared to the PTS control group. When stratified by injury severity (high-energy vs. low-energy fractures), the rate of fixation failure was significant lower with the use of FTHCS when compared with PTS for high-energy fractures while there was no difference in the rates of nonunion or ANFH for high or low-energy fracture patterns. Unique to the FTHCS cohort was an atypical screw migration pattern with varus collapse (6/75, 8%). CONCLUSIONS: The results show that FTHCS fixation could significantly reduce the complication rate of young patients with FNF, especially in high-energy fracture patterns (Garden III-IV, Pauwels III, or vertical of the neck axis (VN) angle ≥ 15°). There was also confirmation that the modes of fixation loosening in the FTCHS group, including screw "medial migration" and superior cutout, were different from the screw withdrawal pattern seen in the PTS cohort. TRIAL REGISTRATION: The study was retrospectively registered at www.Chictr.org.cn ( ChiCTR-IPR-1900025851 ) on September 11, 2019.

Removal of an osteointegrated broken uncemented femoral stem after hip arthroplasty-technical note.

Broken stems are particularly challenging in revision hip arthroplasty, as no standard extraction instruments fit anymore. Well-integrated uncemented stem remnants can be particularly arduous to remove. Stem fatigue failure is not rare with modular stems. Since these are particularly useful in revision hip arthroplasty, increasing numbers of broken stems are to be expected. Usually applied techniques using cortical fenestration distally to the tip of the stem or using an extended transfemoral approach cause supplementary bone defects impairing reconstruction. We present a relatively simple and reproducible revision technique, using a limited standard approach and only regular orthopedic instruments, to extract the remnants of broken uncemented femoral stems in hip arthroplasty. This technique was applied successfully and without complications in 6 cases, permitting eventually the reimplantation of even shorter stems.