Refraining from closed reduction of displaced distal radius fractures in the emergency department-in short: the RECORDED trial.

BACKGROUND: With roughly 45,000 adult patients each year, distal radius fractures are one of the most common fractures in the emergency department. Approximately 60% of all these fractures are displaced and require surgery. The current guidelines advise to perform closed reduction of these fractures awaiting surgery, as it may lead to post-reduction pain relief and release tension of the surrounding neurovascular structures. Recent studies have shown that successful reduction does not warrant conservative treatment, while patients find it painful or even traumatizing. The aim of this study is to determine whether closed reduction can be safely abandoned in these patients. METHODS: In this multicenter randomized clinical trial, we will randomize between closed reduction followed by plaster casting and only plaster casting. Patients aged 18 to 75 years, presenting at the emergency department with a displaced distal radial fracture and requiring surgery according to the attending surgeon, are eligible for inclusion. Primary outcome is pain assessed with daily VAS scores from the visit to the emergency department until surgery. Secondary outcomes are function assessed by PRWHE, length of stay at the emergency department, length of surgery, return to work, patient satisfaction, and complications. A total of 134 patients will be included in this study with follow-up of 1 year. DISCUSSION: If our study shows that patients who did not receive closed reduction experience no significant drawbacks, we might be able to reorganize the initial care for distal radial fractures in the emergency department. If surgery is warranted, the patient can be sent home with a plaster cast to await the call for admission, decreasing the time spend in the emergency room drastically. TRIAL REGISTRATION: This trial was registered on January 27, 2023.

Improving standard volar plate fixation in 3D-guided corrective osteotomy of the distal radius: evaluation of a shim instrument.

Standard volar plates often do not fit the surface of the malunited distal radius after osteotomy, necessitating an offset angle for accurate volar tilt correction. The correction can be achieved if the plate is held at the correct angle when the distal screws are locked. With the advantage of 3D surgical planning and patient-specific instruments, we developed a shim instrument to assist the surgeon in securing the plate at the intended angle when locking the distal screws, and evaluated radiological results. Five female patients aged 63-74 with dorsally angulated extra-articular malunions underwent surgery using 3D-printed guides and the shim instrument. The plate position, drilling guide alignment, screw placements, and distal radius correction on postoperative CTs were compared with the surgical plans. Errors were measured using an anatomical coordinate system, and standard 2D radiographic measures were extracted. Preoperative dorsal tilt ranged from 16° to 35°, and postoperative volar tilt from 1° to 11°. 3D analysis revealed mean absolute correction errors of 6.1° in volar tilt, 1.6° in radial inclination, and 0.6 mm in ulnar variance. The volar tilt error due to the shim instrument, indicated by the mean angle error of the distal screws to the plate, was 2.1° but varied across the five patients. Settling of the distal radius, due to tension during and after reduction, further contributed to a mean loss of 3.5° in volar tilt. The shim instrument helped with securing plates at the intended angle; however, further correction improvements should consider the tension between the fragments of osteoporotic bone.

Dorsal Radiocarpal Dislocation with Radial Styloid Fracture Treated with Arthroscopy-Assisted Reduction and Internal Fixation: A Report of Two Cases.

Radiocarpal dislocation is an uncommon injury that is usually caused by high-energy trauma. Herein, we present two cases of dorsal radiocarpal dislocation with radial styloid fractures that were treated by arthroscopy-assisted reduction and internal fixation. Wrist arthroscopy provides accurate information on intra-articular fractures and carpal and/or intracarpal ligamentous tears of the radiocarpal joint. Furthermore, the procedure enables simultaneous anatomical reduction of intra-articular fractures and radiocarpal and/or intercarpal ligament repair. Arthroscopy-assisted reduction and internal fixation yield satisfactory outcomes for patients presenting with dorsal radiocarpal dislocation and radial styloid fractures.

Addressing the Central Band in Acute and Chronic Essex-Lopresti Injury: A Case Report and Technique Description.

CASE: A 34-year-old man was acutely treated with radial head arthroplasty and central band repair following Essex-Lopresti injury. A 38-year-old man presented with chronic longitudinal instability following failed radial head arthroplasty, which was performed for failed fixation. Treatment with revision radial head arthroplasty and central band reconstruction restored longitudinal stability. CONCLUSION: We have a low threshold to repair the central band in acute Essex-Lopresti injury with sufficient evidence of disruption. Nearly all chronic cases require central band reconstruction to restore longitudinal stability. We do not temporarily pin the DRUJ, and distal ulnar shortening is rarely indicated.

Indirect Coronal Reduction Technique Using a Volar Locking Plate in Distal Radius Fractures: A Case Series.

This is a retrospective case series of patients with distal radius fractures treated with an indirect coronal reduction technique previously described by the senior author using volar locking plates. Seventeen distal radius fractures underwent treatment at a Level I Trauma Center and were retrospectively reviewed for anatomic alignment, surgical complications, and wrist range of motion in the global period. Near-anatomic restoration was achieved with the average radial inclination, radial height, and volar tilt measured as 23.2 ± 3.9 degrees, 11.8 ± 2.1 degrees, and 8.5 ± 5.4 degrees, respectively. Average coronal translation was 2.8 ± 2.7 mm. Postoperative wrist motion on average was within the normal ranges for pronation, supination, wrist flexion, and wrist extension at an average of 36 weeks follow-up. There were no complications related to surgical technique or implant. This case series demonstrates the reliability for coronal reduction with a volar locking plate technique without complications. (Journal of Surgical Orthopaedic Advances 33(1):037-040, 2024).

Ulnar Neuropathy after Distal Radius Fractures - A Case Series and Review of Literature.

Background: Ulnar neuropathy after a distal radius fracture is rare and has limited reports in literature. As such, there is no consensus regarding the optimal treatment and management of such injuries. We report our experience with managing these uncommon injuries. Methods: A retrospective review was conducted where patients presenting with ulnar neuropathy after sustaining a distal radius fracture were identified from January 2021 to December 2023 from our hospital database. Results: A total of four patients were identified. All of them underwent surgical fixation for their respective fractures. None of them underwent immediate or delayed exploration and decompression of the ulnar nerve. All patients had clinical improvement at 3 months after their initial injuries. Three patients eventually had resolution of the neuropathy between 5 and 9 months post injury, while one had partial recovery and developed a neuroma but declined surgery due to symptoms minimally affecting work and daily activities. Conclusions: Ulnar neuropathy after distal radius fractures may not be as rare as previously thought. Expectant management of the neuropathy would be a reasonable treatment as long as there is no evidence of nerve discontinuity or translocation and that there is clinical and/or electrodiagnostic improvement at 3-4 months after the initial injury. Level of Evidence: Level IV (Therapeutic).

[Radial Head Replacement: Management of Elbow and Forearm Instability after Comminuted Radial Head Fractures Associated with Elbow Dislocation]. / Endoprotéza hlavice radia: resení nestability lokte a predloktí pri trístivých zlomeninách hlavice radia spojených s luxací lokte.

PURPOSE OF THE STUDY: This manuscript aims to identify an indication algorithm for the surgical treatment of radial head fractures associated with elbow dislocation. The study compares the mid-term functional outcomes of patients with multifragment radial head fracture treated by resection with the outcomes of patients treated with radial head replacement. MATERIAL AND METHODS: The cohort of 34 patients who sustained a radial head fracture at the mean age of 42.5 years (age range 20-81 years) was broken down into two groups by type of surgery. The EXT group consists of 20 patients with the radial head fracture treated by radial head resection. The END group includes 14 patients treated with the radial head replacement. In all patients, the radial head fracture was associated with elbow dislocation (type IV fracture according to the Mason-Johnston classification). The modified Kocher's surgical approach was used in all patients of both the groups. In the EXT group, resection of the fragmented radial head was performed. In the END group, the ExploR® Modular Radial Head System (Zimmer, Biomet, USA) was used, consisting of a CoCr (cobalt chromium) alloy head and a titanium stem. The pain and the range of motion of the elbow and forearm were evaluated after the completion of the outpatient rehabilitation (the mean follow-up period was 2.4 years). Simultaneously, the elbow joint stability was assessed. Radiographs were taken to detect heterotopic ossifications, proximalization of the radius, and any signs of prosthesis loosening. The frequency of reoperations was followed-up. The MEPS (Mayo Elbow Performance Score) was calculated. RESULTS: In the EXT group, the mean elbow flexion was 117.5° and the mean pronation/supination was 166.9°. In 50% of patients, the MEPS obtained was greater than 90 points, which means an excellent functional outcome. In 1 patient (5%), recurrent elbow dislocation occurred which was the reason for revision surgery (elbow transfixation with the Kirschner wires and medial collateral ligament suture). Revision surgery was also performed in 2 patients (10%) in whom not all the radial head fragments were removed. Moreover, also observed was elbow joint instability (2 patients) and temporary radial nerve paralysis (1 patient). In 1 case discrete proximalization of the radius developed. The patients in the END group showed the mean elbow flexion of 112° and the mean pronation/supination of 135°. The MEPS obtained from 69% of patients was greater than 90 points, which means an excellent outcome. The pain under load was reported by 3 patients (21%). In 5 patients (35%), the X-rays showed radiolucent zone around the stem of the prosthesis. Neither revision surgery, nor prosthesis removal has been performed yet in any patient. No instability, neurological complications or infections have been reported. In both EXT and END group heterotopic ossifications have developed in 4 patients. CONCLUSIONS: Radial head replacement compared to the radial head resection in the management of multifragment fractures associated with elbow dislocations increase the elbow and forearm stability. The group of patients with an implanted radial head prosthesis shows a higher percentage of patients achieving excellent functional outcome than the group of patients with radial head resection. KEY WORDS: radial head, elbow, fracture, dislocation, resection, prosthesis.

Ulnar carpal translation following palmar locking plate fixation for distal radius fractures: a retrospective analysis.

BACKGROUND: Concomitant injuries to the radiocarpal ligaments may occur during episodes of distal radius fractures, which may not cause acute subluxation or dislocation but can lead to radiocarpal instability and progress over time. This study aimed to analyze the occurrence of ulnar carpal translation (UCT) after open reduction and internal fixation of distal radius fractures and evaluate the associated factors of UCT. METHODS: The retrospective study has been done now and includes patients treated between 2010 and 2020 who had undergone reduction and locking plate fixation of distal radius fractures. We assessed radiographs taken immediately after the operation and at 3 months post-operation, enrolling patients with UCT for evaluation. In addition to demographic data, we evaluated radiographic parameters, including fracture pattern, fragment involvement, and ulnar variance. We also assessed the palmar tilt-lunate (PTL) angle to determine associated rotatory palmar subluxation of the lunate (RPSL). RESULTS: Among the 1,086 wrists, 53 (4.9%) had UCT within 3 months post-operation. The majority of wrists with UCT exhibited normal to minus ulnar variance (49 wrists; mean: -1.1 mm), and 24 patients (45.3%) had concomitant RPSL. Fracture classification was as follows: 19 type A3 (35.8%), 5 type C1 (9.4%), 11 type C2 (20.8%), and 18 type C3 (34.0%). Radial styloid was involved in 20 wrists (37.7%), palmar rim in 18 wrists (34.0%), dorsal rim in 25 wrists (47.2%), and die-punch fractures in 3 wrists (5.7%). Concomitant ulnar styloid fractures were present in 29 wrists (54.7%). CONCLUSION: This study highlights the potential for UCT to occur following reduction and fixation of distal radius fractures, particularly in cases with a more severe fracture pattern and combined with ulnar minus variance. The high incidence of concomitant RPSL provides further evidence for the possibility of associated radiocarpal ligament insufficiency after distal radius fracture.

Dorsal wrist plating for the management of intra-articular distal radius fractures.

The aim of the study was to evaluate the results of Dorsal Wrist Plating in intra-articular distal radius fractures with a dorsal displacement. In this prospective study, a single surgeon treated 20 patients with a (partially) intra-articular distal radius fracture with a dorsal rim avulsion or a dorsal Barton's type fragment. They all underwent an open reduction and internal fixation by Dorsal Wrist Plating. A total of 17 patients had a follow-up period of at least 12 months (mean follow- up of 17 months) and these patients were included in the study. Both functional and radiological outcome parameters were measured. The total range of motion was 92 % of the contralateral side. The mean grip strength and key pinch were 24.6 kg and 6.9kg respectively compared to 29.5 kg and 7.4 kg on the non-operated side. The average Mayo Wrist Score was 89.7 (range 80-100) and the mean Disability of the Arm, Shoulder and Hand score was 4.5 (range 0-9.2). An articular step-off was only noted in 2 patients (1 and 2 mm respectively). Radial inclination was restored in all patients. Palmar tilt was anatomically restored in five patients. In all other patients, the palmar tilt was acceptably restored. There was no significant radial shortening in any of the patients. No infections, no tendon ruptures, no Complex Regional Pain Syndrome, or union problems were observed. Dorsal wrist plating seems to be a safe and reliable procedure in the treatment of intra-articular distal radius fractures with dorsal displacement.

Metaizeau Technique for Treatment of Paediatric Isolated Radial Neck Fracture - Clinical and Radiological Outcomes - Case Control Study.

BACKGROUND: Radial neck fractures account for 5-17% of elbow fractures and about 1% of all fractures in children. The subject of the presented research is assesment of clinical and radiological outcomes of the Metaizeau technique for treatment of isolated radial neck fractures in children. MATERIAL AND METHODS: Retrospective analysis of clinical and radiological data of patients treated with the Metaizeau technique in our Department between 2015 and 2020. Twenty children with isolated radial neck fracture met the inclusion criteria. RESULTS: Excellent outcomes of operative treatment were achieved in 95% of children. None of the complications described in the literature (e.g. avascular necrosis of radial head (AVN), malunion, nonunion) were observed in our case series. CONLCUSIONS: 1. The Metaizeau technique for reduction and stabilisation of the radial neck fracture using a TEN is a safe and effective method in the paediatric population and produces good clinical and radiological results. 2.Furthermore, the minimal demands it places on surgical equipment make it possible for this technique to be recommended to orthopaedic surgeons managing paediatric trauma patients.

Size and fixation options of dorsoulnar fragments in distal radius fractures.

PURPOSE: This study aimed to investigate the influence of size and fixation options of dorsoulnar fragments on the clinical outcomes of distal radius fractures (DRFs). METHODS: This retrospective analysis was performed on 94 patients with DFR accompanied by dorsoulnar fragments, spanning the period from October 2018 to November 2022. Mean follow-up was 15.5 (range, 12-20) months. Patients were divided into small- (<5 %, n = 28), middle- (5-15 %, n = 50), and large- (>15 %, n = 16) sized groups according to articular involvement of dorsoulnar fragments determined by three-dimensional (3D) computed tomography (CT) modeling. Subdivision also took place for the presence of postoperative fragment displacement (>2 mm) and fixation methods including volar locking plate (VLP), VLP combined with dorsal hollow compression screw (VDS), and VLP combined with dorsal low-profile mini plate (VDP). The radiographic parameters (volar tilt, radial inclination, and radial height) and functional outcome measures of wrist range of motion, wrist function (DASH, PRWE), and wrist pain (VAS) were evaluated and compared between groups. RESULTS: Fracture healing was observed in all patients at final follow-up. No instances of dorsoulnar fragment displacement were observed in patients undergoing VDS and VDP treatment and the incidence of the dorsoulnar fragment displacement was 35 % (n = 8) in small-sized group, 21 % (n = 7) in middle-sized group, and 7 % (n = 1) in large-sized group when patients were treated with VLP. In small-sized group, no significant differences were found between patients with and without dorsoulnar fragment displacement in dorsiflexion restriction (10.6 ± 2.8°, 9.1 ± 2.3°, P = 0.159), pronosupination restriction (9.6 ± 2.1°, 8.6 ± 1.7°, P = 0.188), DASH (11.5 ± 4.1, 10.7 ± 3.2, P = 0.562), PRWE (11.9 ± 4.2, 10.6 ± 3.6, P = 0.425), and VAS (1.1 ± 1.1, 0.9 ± 1.0, P = 0.528). In middle-sized combined with large-sized group, the functional outcome measures of dorsiflexion restriction (12.5 ± 3.7°, 9.8 ± 2.9°, P = 0.022), DASH (14.6 ± 5.2, 11.4 ± 3.7, P = 0.030), and PRWE (15.0 ± 4.5, 11.3 ± 3.9, P = 0.016) were superior in patients without dorsoulnar fragment displacement. In patients treated with VLPs, no significant differences were found in dorsiflexion restriction (9.8 ± 2.5°, 10.8 ± 3.5°, 9.4 ± 2.5°, P = 0.299), pronosupination restriction (9.2 ± 1.9°, 10.1 ± 2.8°, 8.9 ± 1.5°, P = 0.200), DASH (11.1 ± 3.5, 12.9 ± 4.3, 11.1 ± 3.6, P = 0.162), PRWE (11.1 ± 3.9, 12.8 ± 4.2, 10.8 ± 3.9, P = 0.188), and VAS (1.0 ± 1.0, 1.4 ± 1.1, 0.9 ± 0.9, P = 0.151) between small-sized, middle-sized, and large-sized groups. In middle-sized group, no significant differences were found in dorsiflexion restriction (10.8 ± 3.5°, 9.4 ± 2.2°, 9.4 ± 2.4°, P = 0.316); pronosupination restriction (10.1 ± 2.8°, 8.8 ± 1.9°, 9.0 ± 2.5°, P = 0.314), DASH (12.9 ± 4.3, 10.3 ± 3.7, 10.5 ± 3.7, P = 0.133), PRWE (12.8 ± 4.2, 10.4 ± 3.8, 10.6 ± 4.1, P = 0.199), and VAS (1.4 ± 1.1, 0.8 ± 0.7, 1.0 ± 1.1, P = 0.201) between subgroups of VLP, VDS, and VDP. No significant differences were found in radiographic parameters between all groups compared. CONCLUSION: This study indicated that the strict reduction and fixation of a dorsoulnar fragment might be not essential when its articular involvement was less than 5 %. The volar locking plate (VLP) fixation was commonly effective in treating distal radius fractures accompanied by a dorsoulnar fragment involving over 15 % of the articular surface. Additionally, the use of an additional dorsal hollow compression screw or a dorsal low-profile mini plate can get good wrist function in the early-term follow-up when the dorsoulnar fragment involve 5-15 % of the articular surface.

Long-terms outcomes of radial head arthroplasty using a bipolar prosthesis.

BACKGROUND: In acute treatment of radial head fractures, a radial head prosthesis can be considered if open reduction and internal fixation are not technically feasible. METHODS: We reviewed the data of 27 consecutive bipolar Judet radial head prostheses implanted in patients with unreconstructable radial head fractures and no other concomitant fractures (coronoid or olecranon factures). The lesions of the lateral collateral ligament were rated according to the McKee classification. Twenty-three patients with more than ten-year follow-up participated in this retrospective study All patients underwent assessments for pain, range of motion and stability using the Mayo Elbow Performance Score, the QuickDash questionnaire and a Visual Analogue Scale for pain. Radiography assessment was performed to determine the correct setting of the implant, presence of periprosthetic loosening, prosthetic disassembly, heterotopic ossification, capitellum and ulnohumeral degenerative changes. RESULTS: Mean follow-up was 149 months (± 12.2). Mean range of motion in flexion-extension was 111° (± 10.55), mean extension was 18° (± 14.32) and mean flexion was 130° (± 11.4). Mean arc of motion in supination-pronation was 150° (± 12.26). The mean Mayo Elbow Performance Score was 88, the mean QuickDash score was 7.3; 86% of the patients were satisfied. Seven patients (26%) required secondary surgery. The most frequent complication was heterotopic ossification, which had negative consequences on the functional result. CONCLUSIONS: Bipolar radial head prostheses are an option for acute treatment of isolated unreconstructable radial head fractures. During follow-up, three patients required implant revision and removal; the capitellum surface presented severe degenerative changes and the prosthesis was not replaced. Another complication was the risk of implant dislocation, in relation to implant design, incorrect positioning of the radial head stem or else to inadequate reconstruction of the lateral collateral ligament. Further work is needed to establish the long-term follow-up results of Judet implants in complex elbow fractures.

Digital smart internal fixation surgery for coronal process basal fracture with normal joint spaces or radius-shortening: Occult factor of radius-ulna load sharing.

BACKGROUND: Reasonable postoperative humeroradial and humeroulnar joint spaces maybe an important indicator in biomechanical stability of smart internal fixation surgery for coronoid process basal fractures (CPBF). The aim of this study is to compare elbow articular stresses and elbow-forearm stability under smart internal fixations for the CPBF between normal elbow joint spaces and radius-shortening, and to determine the occult factor of radius-ulna load sharing. METHODS: CT images of 70 volunteers with intact elbow joints were retrospectively collected for accurate three-dimensional reconstruction to measure the longitudinal and transverse joint spaces. Two groups of ten finite element (FE) models were established prospectively between normal joint space and radius-shortening with 2.0 mm, including intact elbow joint and forearm, elbow-forearm with CPBF trauma, anterior or posterior double screws-cancellous bone fixation, mini-plate-cancellous bone fixation. Three sets of physiological loads (compression, valgus, varus) were used for FE intelligent calculation, FE model verification, and biomechanical and motion analysis. RESULTS: The stress distribution between coronoid process and radial head, compression displacements and valgus angles of elbow-forearm in the three smart fixation models of the normal joint spaces were close to those of corresponding intact elbow model, but were significantly different from those of preoperative CPBF models and fixed radius-shortening models. The maximum stresses of three smart fixation instrument models of normal joint spaces were significantly smaller than those of the corresponding fixed radius-shortening models. CONCLUSIONS: On the basis of the existing trauma of the elbow-forearm system in clinical practice, which is a dominant factor affecting radius-ulna load sharing, the elbow joint longitudinal space has been found to be the occult factor affecting radius-ulna load sharing. The stability and load sharing of radius and ulna after three kinds of smart fixations of the CPBF is not only related to the anatomical and biomechanical stability principles of smart internal fixations, but also closely related to postoperative elbow joint longitudinal space.

[Basic principles of surgical treatment of distal radius fractures]. / Grundprinzipien der operativen Versorgung der distalen Radiusfraktur.

Distal radius fractures are one of the most frequent fractures of the upper extremities. The decision for conservative or surgical treatment is made after appropriate diagnostics using conventional radiographic and usually computed tomography imaging examinations. If the indications for surgical treatment are present, various options for reduction and fixation are available. The spectrum ranges from closed to open procedures up to accompanying arthroscopic support. Appropriate preoperative patient education about the procedure and the planned postinterventional treatment is essential. The goal of treatment is to restore wrist function while maintaining mobility and strength with a low risk of complications. All surgical procedures share the principle of reduction to restore anatomical relationship followed by fixation. Closed procedures include fixation with Kirschner wires and the construction of an external fixator. Volar locking plate osteosynthesis has become established in recent years as the method of choice for the majority of the fractures to be treated. For special fracture patterns and the treatment of accompanying injuries, arthroscopic support can be indicated. There is no uniform consensus on the best choice of procedure. This article discusses the possible procedures including the approaches, fixation techniques and specific follow-up treatment.

Volar fixed plating of distal radius fractures: optimizing plate position for enhanced clinical outcomes.

BACKGROUND: The precise influence of plate position on clinical outcomes in the context of volar fixed-angle plating for distal radius fractures is not fully understood. This article aims to investigate the influence of plate position on clinical results, and functional outcomes in patients treated with volar fixed plating for distal radius fractures. METHODS: A total of 58 patients with 64 distal radius fractures were included in the study. Patient demographics, fracture characteristics, surgical details, and radiographic data were collected. Post-operative AP and Lat views of all patients taken on the first day after surgery were evaluated. Volar Tilt, Radial Inclination and Radial Height measurements were used as reduction criteria. In the follow-up, the patients were called for their last control, flexion and extension angles of the wrist and Mayo Wrist Scores, the distance of the plate to the joint line and the angle between the plate and the radial shaft were measured and recorded. RESULTS: A total of 64 distal radius fractures, with a mean age of 46.9 years, and the mean follow-up period 24.9 months were included in this study. There was a significant relationship between the Radial Inclination and Plate-Shaft Angle variables and the Mayo Wrist Score at a 99% confidence interval. Additionally, a relationship was observed between the Radial Height variable and the Mayo Score at a 90% confidence interval. A significant positive association was observed between radial inclination and achieving a Good-to-Excellent Mayo score (OR = 1.28, 95% CI [1.08-1.51], p = 0.004). Plate distance to joint line demonstrated a marginally significant positive association with a Good-to-Excellent Mayo score (OR = 1.31, 95% CI [0.97-1.77], p = 0.077). Univariate analysis revealed a significant negative association between plate-shaft angle and achieving a Good-to-Excellent Mayo score (OR = 0.71, 95% CI [0.52-0.99], p = 0.045). This negative association remained statistically significant in the multivariate analysis (p = 0.016). CONCLUSION: Radial inclination, plate distance to joint line, and angle between plate and radius shaft were identified as significant factors associated with improved Mayo Wrist Scores.

[Diagnostics and classification of distal radius fractures]. / Diagnostik und Klassifikation der distalen Radiusfraktur.

Fractures of the distal radius show a wide spectrum of different fracture patterns. Although standard X­ray images are sufficient for extra-articular fractures, the exact analysis of intra-articular fractures requires the use of computed tomography (CT) with coronal, sagittal and axial sectional images. The classification is based on the Working Group for Osteosynthesis Questions (AO) criteria. The treatment strategy can be more precisely defined by a CT-based classification. Special attention must be paid to the presence of the key corners, as they have a high risk for primary or secondary dislocation if they not adequately stabilized.

[Concomitant injuries of the wrist, distal ulna and distal radioulnar joint in distal radius fractures : Primary operative cotreatment vs. healing with no additional treatment]. / Begleitende Verletzungen von Karpus, distaler Elle und distalem Radioulnargelenk bei distaler Radiusfraktur : Primäre operative Mitversorgung vs. Heilung ohne zusätzliche Therapie.

Distal radius fractures are the most common fractures in adults and account for one quarter of all fractures, with increasing incidence. The number of patients and the requirement of an exact treatment are high. Continuous developments in diagnostic and operative possibilities enable in many cases a high-quality treatment with good clinical outcome; however, radius fractures rarely occur alone but in combination with additional fractures or ligamentous injuries. The frequency and extent of these injuries are not linked to the complexity of the primary injury. The aim is to recognize and correctly diagnose potential concomitant injuries. Many injuries do not need immediate treatment but heal without additional treatment after the radius has been treated. It is important to recognize those injuries which can cause severe complications if untreated; however, exactly this is often difficult. In many cases there is still no consensus if and how concomitant injuries should be treated. This article highlights the most frequent concomitant injuries in distal radius fractures with the possible advantages and disadvantages of cotreatment in order to facilitate decision making.

Radiographic and clinical outcomes of muenster and sugar tong splints for distal radius fractures: a comparative study.

BACKGROUND: Non-operative management is typically indicated for extra-articular distal radius fractures. Conservative treatments such as Sugar tong splints (STs) and Muenster splints (MUs) are commonly used. However, there is limited research and outcome data comparing the two splint types. Therefore, this study aimed to investigate and compare the radiographic and clinical outcomes of treatment using STs and MUs. METHODS: In this retrospective comparative study, we aimed to evaluate and compare the radiographic and clinical outcomes of STs and MUs for the treatment of distal radius fractures. The study included 64 patients who underwent closed reduction (CR) in the emergency room and were treated with either STs or MUs splints (STs group: n = 38, MUs group: n = 26). Initial X-rays, post-CR X-rays, and last outpatient follow-up X-rays were evaluated. Radial height (RH), ulnar variance (UV), radial inclination (RI), and volar tilt (VT) were measured by a blinded investigator. The Quick DASH form was applied to measure patients' satisfaction after treatments. RESULTS: There were no significant differences in baseline characteristics, initial radiographic measurements, or radiographic measurements immediately after CR between the two groups. However, the overall radiological values deteriorated to some degree in both groups compared to the post-CR images. Furthermore, using a paired test, the STs group showed significant differences in RH and RI, and the MUs group showed significant differences in RH and UV between the last follow-up and post-CR images. CONCLUSIONS: The study concluded that there was no difference in clinical outcomes between the two splint types. However, both STs and MUs groups showed reduced radiographic parameters, and the MUs group showed a significant reduction of RH and UV in the treatment of distal radius fractures. LEVEL OF EVIDENCE: Level IV; Retrospective Comparison; Treatment Study.