Advanced anaerobic digestion of household food waste pretreated by in situ-produced mixed enzymes via solid-state fermentation: Feasibility and application perspectives.

Enzymatic pretreatment is an effective method which can improve the anaerobic digestion (AD) efficiency of household food waste (HFW). As an alternative to expensive commercial enzymes, mixed enzymes (MEs) produced in situ from HFW by solid-state fermentation (SSF) can greatly promote the hydrolysis rate of HFW and achieve advanced anaerobic digestion (AAD) economically sustainable. In this paper, strategies for improving the efficiency of the enzyme-production process and the abundance of MEs are briefly discussed, including SSF, fungal co-cultivation, and stepwise fermentation. The feasibility of using HFW as an applicable substrate for producing MEs (amylase, protease, and lignocellulose-degrading enzymes) and its potential advantages in HFW anaerobic digestion are comprehensively illustrated. Based on the findings, an integrated AAD process of HFW pretreated with MEs produced in situ was proposed to maximise bioenergy recovery. The mass balance results showed that the total volatile solids removal rate could reach 98.56%. Moreover, the net energy output could reach 2168.62 MJ/t HFW, which is 9.79% higher than that without in situ-produced MEs and pretreatment. Finally, perspectives for further study are presented.

Life cycle assessment of plastic waste in Suzhou, China: Management strategies toward sustainable express delivery.

The explosive growth of China's express delivery industry has greatly increased plastic waste, with low-value plastics not effectively utilized, such as PE packaging bags, which are often not recycled and end up in landfills or incinerators, causing significant resource waste and severe plastic pollution. A gate -to- grave life cycle assessment was adopted to assess the impacts of express delivery plastic waste (EDPW) management models (S1, landfill; S2, incineration; S3, mechanical pelletization), with Suzhou, China as a case. Results showed that mechanical pelletization, was the most environmentally advantageous, exhibiting a comprehensive environmental impact potential of -215.54 Pt, significantly lower than that of landfill (S1, 78.45 Pt) and incineration (S2, -121.77 Pt). The analysis identified that the end-of-life disposal and sorting stages were the principal contributors to environmental impacts in all three models, with transportation and transfer stages of residual waste having minimal effects. In terms of all environmental impact categories, human carcinogenic toxicity (HTc) emerged as the most significant contributor in all three scenarios. Specifically, S1 exhibited the most detrimental effect on human health, while S2 and S3 showed positive environmental impacts. Based on these findings, it is recommended that the application and innovation in mechanical recycling technologies be enhanced, the promotion of the eco-friendly transformation of packaging materials be pursued, and a sustainable express delivery packaging recycling management system be established. These strategies are essential for achieving more eco-friendly management of EDPW, reducing its environmental pollution, and moving towards more sustainable express delivery management practices.

Optimization and application of pretreatment method of microplastics detection in municipal solid waste landfills.

The landfill is one of the most important sources of microplastics (MPs). The pretreatment method is a precondition of microplastics study for the presence of complex substances in landfills. Therefore, it is essential to examine the impact of different pretreatment methods on the microplastics detection. A literature review and a comparison experiment on digestion solutions were performed to establish a comprehensive identification method for MPs in landfills. When exposed to of 30 % H2O2, minimal mass reduction of PE, PP and PET were 4.00 %, 3.00 % and 3.00 % respectively, and the least surface damage was observed in MPs, while exhibiting the most optimal peak value for infrared spectral characteristics. It is demonstrated that the effect of 30 % H2O2 dissolution was superior compared to 10 % KOH and 65 % HNO3. The method was subsequently utilized to investigate the distribution of MPs in a landfill. The dominant MPs were polyethylene (PE, 18.56-23.91 %), polyethylene terephthalate (PET, 8.80-18.66 %), polystyrene (PS, 10.31-18.09 %), and polypropylene (PP, 11.60-14.91 %). The comprehensive identification method of "NaCl density separation + 30 % H2O2 digestion + NaI density separation + sampling microscope + Mirco-FTIR" is suitable for the detection of MPs in landfills.

Enhanced anaerobic co-digestion of cattle manure with food waste and pig manure: Statistical optimization of pretreatment condition and substrate mixture ratio.

This study investigated the optimal pretreatment condition and mixture ratio of cattle manure (CM) for its efficient anaerobic co-digestion (AcoD) with food waste (FW) and pig manure (PM). The pretreatment performances of thermal (TM), microwave (MW), and ultrasound (US) technologies and the AcoD performance were statistically and experimentally evaluated at various mixture ratios of CM, FW, and PM. The results revealed that the most effective pretreatment condition with the TM, MW, and US pretreatments was 129.3 °C for 49.6 min, 824.2 W for 7.3 min, and 418.0 W for 36.3 min, respectively. The best AcoD performance of optimally pretreated CM (PCM) was achieved when 30.5 % PCM was mixed with 42.5 % FW and 27.0 % PM. A long-term evaluation showed that the start-up rate for the anaerobic mono-digestion of PCM was 2.3 times faster than that of CM and the amount of methane produced was 4.7 times higher; process stability was thus preferentially maintained under a higher organic loading rate (OLR) (2.0 kg-VS/m3∙d). The start-up rate for the AcoD of PCM with FW and PM was 1.2 times higher than that of the AcoD of CM with FW and PM. Although the performance gap between the AcoD reactors after steady state was not significantly different, the PCM AcoD reactor provided a more stable operation under a higher OLR (5.0 kg-VS/m3∙d). This study demonstrates that the pretreatment and co-digestion of CM could significantly enhance the production of biogas and improve process stability.

Plastic waste gasification using oxygen-enriched air and steam: Experimental and model results from a large pilot-scale reactor.

Advanced thermochemical technologies for plastic waste valorization represent an interesting alternative to waste-to-energy options. They are particularly appealing for waste-to-hydrogen and waste-to-chemicals applications, with autothermal steam-oxygen gasification in fluidized bed reactors showing the greatest market potential. The study describes a series of experimental tests carried out on a large pilot-scale fluidized bed gasifier, using steam and O2-enriched air, with increasing fractions of oxygen. Different values of the main operating parameters are varied: equivalence ratio (0.22-0.25), steam-to-carbon ratio (0.7-1.13), and steam-to-oxygen ratio (up to 3.2). The fuel consists of real mixed plastic waste coming from separate collection of municipal solid wastes. The data obtained are used to investigate in depth the role of the main operating parameters and to improve and validate a recently developed one-dimensional kinetic model for waste gasification. The validation shows a good agreement between experimental data and model results, suggesting the reliability of the model to predict the reactor behavior under conditions of pure steam-oxygen gasification, relevant to many industrial applications. It has been found that the equivalence ratio is the parameter that most affects the syngas composition. At a constant equivalent ratio, the molar fraction of oxygen in the enriched air shows a limited influence on syngas composition while the steam is crucial in controlling the temperature along the reactor. Provided that the steam-to-carbon molar ratio is larger than 1.5, steam affects mainly the reactor temperature rather than the syngas composition, qualifying the steam-to-oxygen molar ratio as an instrumental parameter for smooth plant operation.

Life cycle assessment and cost analysis of an innovative automatic system for sorting municipal solid waste: A case study at Milan Malpensa airport.

With the recent advancement in artificial intelligence, there are new opportunities to adopt smart technologies for the sorting of materials at the beginning of the recycling value chain. An automatic bin capable of sorting the waste among paper, plastic, glass & aluminium, and residual waste was installed in public areas of Milan Malpensa airport, a context where the separate collection is challenging. First, the airport waste composition was assessed, together with the efficiency of the manual sorting performed by passengers among the conventional bins: paper, plastic, glass & aluminium, and residual waste. Then, the environmental (via the life cycle assessment - LCA) and the economic performances of the current system were compared to those of a system in which the sorting is performed by the automatic bin. Three scenarios were evaluated: i) all waste from public areas, despite being separately collected, is sent to incineration with energy recovery, due to the inadequate separation quality (S0); ii) recyclable fractions are sent to recycling according to the actual level of impurities in the bags (S0R); iii) fractions are sorted by the automatic bin and sent to recycling (S1). According to the results, the current separate collection shows a 62 % classification accuracy. Focusing on LCA, S0 causes an additional burden of 12.4 mPt (milli points) per tonne of waste. By contrast, S0R shows a benefit (-26.4 mPt/t) and S1 allows for a further 33 % increase of benefits. Moreover, the cost analysis indicates potential savings of 24.3 €/t in S1, when compared to S0.

Laboratory investigation and prediction of permeability of fresh to five-year-old municipal solid wastes of low and high food contents.

The permeability of municipal solid wastes (MSWs) is important for the design and operation of landfills. This study presented the experimental investigation of the permeability of low food content- (LF-) and high food content- (HF-) MSWs prepared in laboratory-scale bioreactors for up to 5 years. The permeability of MSWs with diverse degrees of decomposition (DOBs), void ratios, and permeation liquids was measured (288 tests). The measured permeability was compared to that predicted from the (modified) Kozeny-Carman (K-C) equations in four different forms. The results indicated that the permeability of both LF- and HF-MSWs decreased significantly (p < 0.05) with decomposition under a given void ratio. The predicted permeability using the original K-C equation fitted well with that of fresh MSWs. The permeability of decomposed MSWs was closer to the predicted results using the modified K-C equation with the effective void ratio. This can be attributed to the increase in the fine fractions due to degradation. The reduction in the effective voids was more significant with HF-MSWs. The parameters required in the (modified) K-C equations showed a good correlation with DOB and effective particle size (d10). The predicted permeability based on the relationship between DOB (or d10) and equation parameters was within 3 times the difference compared to the measured values. The above results indicated that the modified K-C equation can be adopted to predict the permeability of fresh and degraded MSWs while more field-scale experiments should be conducted to further evaluate its feasibility.

Artificial Intelligence in enhancing sustainable practices for infectious municipal waste classification.

This research paper focuses on effective infectious municipal waste management in urban settings, highlighting a dearth of dedicated research in this domain. Unlike general or specific waste types, infectious waste poses distinct health and environmental risks. Leveraging advanced artificial intelligence techniques, we prioritize infectious waste categorization and optimization, integrating metaheuristics into optimization methods to create a robust dual-ensemble framework. Our model, the "Enhanced Artificial Intelligence for Infectious Municipal Waste Classification System," combines ensemble image segmentation methods and diverse convolutional neural network models. Innovative geometric image augmentation enhances model robustness, diversifies training data, and improves accuracy across waste types. A pivotal aspect is the integration of a reinforcement learning-differential evolution algorithm as a decision fusion strategy, optimizing classification by harmonizing outputs from ensemble methods and convolutional neural network models. Computational results, using a newly collected dataset, demonstrate our model's accuracy exceeding 96.54% while using the existing solid waste dataset we achieve the accuracy of 97.81%, outperforming advanced approaches by margins ranging from 2.02% to 8.80%. This research significantly advances sustainable waste management, showcasing artificial intelligence's transformative potential in addressing intricate waste challenges. It establishes a foundational framework prioritizing efficiency, effectiveness, and sustainability for future waste management solutions. Acknowledging the importance of diverse datasets, customization for urban contexts, and practical integration into existing infrastructures, our work contributes to the broader discourse on the role of artificial intelligence in evolving waste management practices.

Hydrothermal-enhanced pyrolysis for efficient NOX reduction and biochar valorization from food waste digestate.

Pyrolysis has emerged as a promising technology for valorizing digestate resulting from the anaerobic digestion of food waste. However, the high NOX emissions during pyrolysis limit its application. This study proposed a hydrothermal coupled pyrolysis process to control the element transfer in digestate during biochar production. The efficient reduction of NOX emissions and the improvement of biochar adsorbability were realized. The hydrothermal process reduced the nitrogen content in solid digestate by 49.10 %-81.79 %, thus reducing the NOX precursors in syngas and the N-containing substances in bio-oil. Additionally, the specific surface area and the total pore volume of biochar were enhanced from 25 m2/g to 60-73 m2/g and 0.06 cm3/g to 0.12-0.14 cm3/g, respectively. More defects, oxygen-containing functional groups, and doped Ca on the biochar resulted in a high phosphate removal efficiency of 94 %. The proposed technology provides an efficient and environmentally friendly way to utilize the digestate.

Maximal fines and corruption: An experimental study on illegal waste disposal.

Corruption is known to be one of the real life situations which may jeopardize the effectiveness of fines in deterring crime. We present a model of 'crime with corruption' by which both the dilution of crime deterrence due to corruption, as well as the possibility of crime encouraging fines, are formally highlighted. More importantly, by running an experiment on a subject pool of students for the case of illegal waste disposal, we provide experimental evidence on the validity of our theoretical predictions. We find that increasing fine rate may become crime encouraging, or at least ineffective, beyond a context-specific fine threshold. From a policy perspective, we suggest that the optimal design of a crime-deterring sanctioning system must simultaneously account for both corruption practices and anti-corruption policies.

Reduction of heavy metals in municipal solid waste incineration fly ash followed by making transparent glass.

Municipal solid waste incineration (MSWI) fly ash is a hazardous waste containing heavy metals. Secondary aluminum dross (SAD) is a hazardous waste discharged from aluminum smelting, containing active aluminum nitride (AlN). In this work, heavy metals from MSWI fly ash were reduced into alloy by AlN from SAD, and the slag was manufactured into transparent glass for building. Reduction of iron and zinc was 67 and 100 %, respectively. Reduction mechanism was explored after applying XRD, XRF and thermodynamics analysis. It was found that the reduction reaction was an ion reaction. The AlN and heavy metal oxide transformed into anionic group containing nitrogen and heavy metal cation, after entering slag. The heavy metals were reduced into alloy after electron was transferred from anionic group to cation. In addition, the reduced iron and zinc could merge into alloy, which inhibited evaporation of zinc. Yellow transparent glass was obtained after the reduction process. Yellow was come from titanium oxide, which could not be reduced by AlN. Microhardness, density and water absorption of the transparent glass were 741 HV, 2.86 g·cm-3 and 0.04 %, respectively. Leaching content of Ni, Cu, Zn and Pb of the glass were 0.1, <0.1, 0.6 and < 0.1 mg/L, respectively, all below the TCLP limit. About 115 âˆ¼ 213 dollars were earned after manufacturing 500 kg of MSWI fly ash into transparent glass. This work provided a novel idea of recycling solid waste into alloy and transparent glass for building.

Characteristics of heavy metal migration during pyrolysis of typical oily wastes and environmental risk assessment of pyrolysis residues.

Solid-phase residues from pyrolysis of oily wastes (OS) are widely used due to their rich pore structure and strong adsorption capacity. In this study, pyrolysis residues (OS-P) were obtained from the pyrolysis treatment of four typical OS in Karamay, Xinjiang. The results indicate that the crystalline substances in OS-P mainly were SiO2, BaSO4, and graphite. The heavy metals of OS-P were higher than that of OS in the following order: Zn > Cu > Ni > Cr > Pb > Cd. The results of the improvement of Community Bureau of Reference (BCR) sequential extraction showed that the proportion of Cu, Ni and Cr in OS1-P in the residual fraction was higher than that of the other three OS. The residual fraction of Cu, Ni, and Cr in OS1-P increased from 16.0 %, 30.0 %, and 11.0 % to 66.1 %, 81.9 %, and 89.2 %, respectively. After pyrolysis treatment, the leaching concentration of heavy metals in the residue was reduced. Referring to the requirements for heavy metal control limits (GB 4284-2018), all heavy metals in OS-P showed low risk. Their potential ecological risk indices were 4.11, 3.13, 4.87 and 5.35, respectively, indicating that the potential ecological hazards of heavy metals from OS-P were slight. There was no significant effect on the histopathological changes of kidney, lung, liver, ovary and testis of mice, showing that the rational use of OS-P in production will not produce toxic effects on target animals. Based on risk assessment and safety evaluation, the application of OS-P is controllable, safe and reliable for resource utilization.

Closing the nutrient cycle in urban areas: The use of municipal solid waste in peri-urban and urban agriculture.

Cities face the challenges of supplying food and managing organic municipal solid waste (OMSW) sustainably amid increasing urbanization rates. Urban agriculture (UA) can help with this effort by producing local crops that are fertilized with nutrients recovered from compost generated from OMSW. This research aims to determine the potential of OMSW compost to supply the nitrogen-phosphorus-potassium (NPK) demand of UA and the environmental benefits of replacing mineral fertilizer from a life cycle perspective. The Metropolitan Area of Barcelona (AMB) serves as the case study given its commitment to reuse biowaste according to the Revised Waste Framework Directive and to promote UA as a signing member of the Milan Urban Food Policy Pact. Based on crop requirements and farmer surveys, we find that the annual NPK demands of the agricultural fields of the AMB that cover 5,500 ha and produce 70,000 tons of crops are approximately 769, 113, and 592 tons of NPK, respectively. Spatial material flow analysis and life cycle assessment were applied to found that the current waste management system can potentially substitute 8 % of the total NPK demanded by UA with compost, reduce the impacts by up to 39 % and yield savings in global warming of 130 %. The more ambitious future scenario of 2025 can potentially substitute 21 % of the total NPK demand and reduce environmental impacts up to 1,049 %, depending on the category considered. Avoiding processing of mixed OMSW, mineral fertilizer replacement and cogeneration of electricity from biogas are the major contributors to these environmental savings.

High temperature melting of municipal solid waste incineration (MSWI) fly ash and co-disposal technology with blast furnaces.

With the development of municipal solid waste incineration technologies, the disposal of fly ash has become a difficult problem that many countries need to solve. High-temperature melting is a promising disposal technology. Based on this, a new process for collaborative treatment of fly ash in metallurgical blast furnaces had been proposed in this study. To explore the impact of disposal of fly ash on blast furnace production, by simulating the high-temperature reducing environment of blast furnaces, the melting changes of water-washed fly ash (W-FA), and the effects of W-FA injection on coal combustion and products (slag, iron) composition were studied. The results showed that W-FA, as a flux, could be sprayed into the blast furnace separately or mixed with coal. But when injected along with coal, W-FA would suppress the combustion of coal. After melting, the removal rates of S, P, Cl, and Pb in W-FA were 21%, 30%, 86%, and 89%, respectively. The removal rates of K, Na, and Zn were close to 100%, and Cr was basically not removed. When the proportion of W-FA to coal was less than 1%, in addition to controlling the alkalinity of the slag, the impact of W-FA on the composition of iron and slag was minimal. The successful execution of this work will not only achieve the reduction, harmless and resourceful utilization of fly ash, but also save investment and operating costs of disposal facilities, with both environmental and social benefits.

Migration of trace elements and radioisotopes to various fractions of solid wastes generated as a result of the sewage sludge incineration process.

The research was aimed at providing new knowledge in the field of chemical characteristics of solid waste generated in the process of combustion of sewage sludge in fluidized bed furnaces. The research material consisted of disposed fluidized beds (DFB), sewage sludge ash (SSA) and air pollution control residues (APC) from three Polish installations for the thermal treatment of sewage sludge. Natural radionuclides as well as anthropogenic isotope 137Cs were determined in the tested materials and the migration of a wide spectrum of trace elements to various waste fractions generated in the process of sewage sludge combustion was examined. It was observed that both radioisotopes and most of the trace elements determined accumulate in SSA and DFB, while the APC fraction contains a much smaller amount of them. The exceptions are mercury and selenium, whose volatile compounds migrate to the exhaust gas dedusting system and accumulate in the APC fraction (up to 40 mg/kg and 13 mg/kg, respectively). A potential threat from the 226Ra isotope in SSA is identified in the context of the management of this waste in the production of building materials because the typical activity of 226Ra in SSA collected from areas with very low Ra content in natural environment exceeds 1.5-6 times the activity of this isotope in conventional cement mixtures. When managing SSA and DFB, special attention should be paid to the content of metalloids such as As, B and Se, due to the high content of mobile forms of these elements in the mentioned materials.

Assessing microbial stability and predicting biogas production in full-scale thermophilic dry methane fermentation of municipal solid waste.

Compared to typical anaerobic digestion processes, little is known about both sludge microbial compositions and biogas production models for full-scale dry methane fermentation treating municipal solid waste (MSW). The anaerobic sludge composed of one major hydrogenotrophic methanogen (Methanoculleus) and syntrophic acetate oxidizing bacteria (e.g., Caldicoprobacter), besides enrichment of MSW degraders such as Clostridia. The core population remained phylogenetically unchanged during the fermentation process, regardless of amounts of MSW supplied (∼35 ton/d) or biogas produced (∼12000 Nm3/d). Based on the correlations observed between feed amounts of MSW from 6 days in advance to the current day and biogas output (the strongest correlation: r = 0.77), the best multiple linear regression (MLR) model incorporating the temperature factor was developed with a good prediction for validation data (R2 = 0.975). The proposed simple MLR method with only data on the feedstock amounts will help decision-making processes to prevent low-efficient biogas production.

Upgrade from aerated static pile to agitated bed systems promotes lignocellulose degradation in large-scale composting through enhanced microbial functional diversity.

Composting presents a viable management solution for lignocellulose-rich municipal solid waste. However, our understanding about the microbial metabolic mechanisms involved in the biodegradation of lignocellulose, particularly in industrial-scale composting plants, remains limited. This study employed metaproteomics to compare the impact of upgrading from aerated static pile (ASP) to agitated bed (AB) systems on physicochemical parameters, lignocellulose biodegradation, and microbial metabolic pathways during large-scale biowaste composting process, marking the first investigation of its kind. The degradation rates of lignocellulose including cellulose, hemicellulose, and lignin were significantly higher in AB (8.21%-32.54%, 10.21%-39.41%, and 6.21%-26.78%) than those (5.72%-23.15%, 7.01%-33.26%, and 4.79%-19.76%) in ASP at three thermal stages, respectively. The AB system in comparison to ASP increased the carbohydrate-active enzymes (CAZymes) abundance and production of the three essential enzymes required for lignocellulose decomposition involving a mixture of bacteria and fungi (i.e., Actinobacteria, Bacilli, Sordariomycetes and Eurotiomycetes). Conversely, ASP primarily produced exoglucanase and ß-glucosidase via fungi (i.e., Ascomycota). Moreover, AB effectively mitigated microbial stress caused by acetic acid accumulation by regulating the key enzymes involved in acetate conversion, including acetyl-coenzyme A synthetase and acetate kinase. Overall, the AB upgraded from ASP facilitated the lignocellulose degradation and fostered more diverse functional microbial communities in large-scale composting. Our findings offer a valuable scientific basis to guide the engineering feasibility and environmental sustainability for large-scale industrial composting plants for treating lignocellulose-rich waste. These findings have important implications for establishing green sustainable development models (e.g., a circular economy based on material recovery) and for achieving sustainable development goals.

Social competition drives collective action to reduce informal waste burning in Uganda.

Improving urban air quality is a pressing challenge in the Global South. A key source of air pollution is the informal burning of household waste. Reducing informal burning requires governments to develop formal systems for waste disposal and for residents to adopt new disposal behaviors. Using a randomized experiment, we show that social competitions between pairs of neighborhoods in Nansana municipality, Uganda, galvanized leadership and inspired collective action to reduce informal burning. All 44 neighborhoods in the study received a public health campaign, while 22 treated neighborhoods were paired and competed to reduce waste burning over an 8-mo period. Treated neighborhoods showed a 24 percent reduction (95% CI: 11 to 35 percent) in waste burning relative to control neighborhoods at the end of the competition period. There is no evidence that treated neighborhoods experienced a rebound in waste burning several months after the competitions. Community leaders reported greater effort in coordinating residents and more pride in their neighborhood when assigned to the competition treatment. These results suggest that creating focal points for leadership and collective action can be an effective and low-cost strategy to address policy problems that require broad participation and costly behavior change.

Nanobubble technology to enhance energy recovery from anaerobic digestion of organic solid wastes: Potential mechanisms and recent advancements.

Nanobubble (NB) technology has gained popularity in the environmental field owing to its distinctive characteristics and ecological safety. More recently, the application of NB technology in anaerobic digestion (AD) systems has been proven to promote substrate degradation and boost the production of biogas (H2 and/or CH4). This review presents the recent advancements in the application of NB technology in AD systems. Meanwhile, it also sheds light on the underlying mechanisms of NB technology that contribute to the enhanced biogas production from AD of organic solid wastes. Specifically, the working principles of the NB generator are first summarized, and then the structure of the NB generator is optimized to accommodate the demand for NB characteristics in the AD system. Subsequently, it delves into a detailed discussion of how the addition of nanobubble water (NBW) affects AD performance and the different factors that NB can potentially contribute. As a simple and environmentally friendly additive, NBW was commonly used in the AD process to enhance the fluidity and mass transfer characteristics of digestate. Additionally, NB has the potential to enhance the functionality of different types of microbial enzymes that play crucial roles in the AD process. This includes boosting extracellular hydrolase activities, optimizing coenzyme F420, and improving cellulase function. Finally, it is proposed that NBW has development potential for the pretreatment of substrate and inoculum, with future development being directed towards this aim.