The extended finite element method in endodontics: A scoping review and future directions for cyclic fatigue testing of nickel-titanium instruments.

OBJECTIVES: The present study reviews the current literature regarding the utilization of the extended finite element method (XFEM) in clinical and experimental endodontic studies and the suitability of XFEM in the assessment of cyclic fatigue in rotary endodontic nickel-titanium (NiTi) instruments. MATERIAL AND METHODS: An electronic literature search was conducted using the appropriate search terms, and the titles and abstracts were screened for relevance. The search yielded 13 hits after duplicates were removed, and four studies met the inclusion criteria for review. RESULTS: No studies to date have utilized XFEM to study cyclic fatigue or crack propagation in rotary endodontic NiTi instruments. Challenges such as modelling material inputs and fatigue criteria could explain the lack of utilization of XFEM in the analysis of mechanical behavior in NiTi instruments. CONCLUSIONS: The review showed that XFEM was seldom employed in endodontic literature. Recent work suggests potential promise in using XFEM for modelling NiTi structures.

Antibacterial ability of different activated irrigation after root canal preparation: intratubular analyses.

This study assessed the intratubular antibacterial ability of different activated irrigations after chemical mechanical preparation. Seventy-two palatal root canals of upper molars were infected with Enterococcus faecalis for 4 weeks, and then initial bacterial collection from the main root canal was performed. The root canals were prepared by using a WaveOne Gold large (45/.05) and distributed into 6 groups according to the activation of the final irrigation: ultrasonic activation (UA), XP-Endo Finisher (25/.00), XP Clean (25/.02), EasyClean (25/.04) in reciprocating motion and continuous rotary motion (ECRot), and conventional irrigation. After final irrigation, another bacterial collection from the main root canal was performed, and the root was sectioned transversely in three-thirds and stained for analysis by confocal laser microscopy. Intratubular bacteria were collected through dentin powder and plated for bacterial viability analysis. Intergroup and intragroup comparisons were performed by using analysis of variance and repeated measures analysis of variance, respectively, both at 5% significance. ECRot had higher antibacterial ability than UA (p<0.05), and both were superior to the other groups (p<0.05) in both methodologies. It can be concluded that activation of final irrigation enhances the disinfection of the root canal system, and activators have different efficacies.

Impact of using XP-endo finisher and nanobubble water during EDTA dentin conditioning on TGF-ß1 release in regenerative endodontic procedures.

INTRODUCTION: Transforming Growth Factor-Beta 1 (TGF-ß1) plays a crucial role in the success of Regenerative Endodontic Procedures (REPs) as they directly impact the proliferation and differentiation of stem cells. TGF-ß1 is released by conditioning of the dentin matrix using 17% EDTA. EDTA was found to have deleterious effects on dentin especially in immature teeth with fragile dentin walls. Decreasing the irrigation time was reported to decrease these effects. Accordingly, enhancement and activation of the EDTA solution to maintain its efficiency in TGF-ß1 release from dentin and thus compensating the reduction in irrigation time was employed. EDTA solution was enhanced by adding Nanobubble (NB) water which contains oxygen filled cavities less than 200 nm in diameter. Additionally, EDTA was activated with XP-endo Finisher rotary file. The aim of this study was to assess the impact of NB enhancement and/or XP-endo Finisher activation of the EDTA solution on the TGF-ß1 release from dentin. METHODS: Fifty standardized root segments with open apex were allocated to two main groups according to whether EDTA was enhanced with NB water or not, and within each group whether XP-endo Finisher activation was used or not in addition to a Negative Control group. The concentration of the released TGF-ß1 in the root canal was measured using enzyme-linked immunosorbent assay (ELISA). The statistical analysis was done using the Shapiro- Wilk, Kolmogorov Smirnov, ANOVA and Post-hoc Tukey tests. RESULTS: All groups released a considerable amount of TGF-ß1 with the highest values in the EDTA/NB/XP group, followed by EDTA/NB, EDTA/DW/XP, EDTA/DW and Negative Control groups respectively. CONCLUSIONS: The results of this study suggest that NBs can promote the success of REPs since it revealed a significant increase in the TGF-ß1 release following its use in the enhancement of the EDTA solution. A comparable effect was obtained by XP-endo finisher activation of the EDTA solution. The combined use of NBs and XP-endo Finisher can be a promising addition in REPs. Accordingly, Enhancement and activation of the EDTA solution may compensate decreasing the EDTA irrigation time attempted to avoid the deleterious effect of EDTA on dentin.

Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT.

AIM AND BACKGROUND: To compare the root canal volume in primary teeth using hand and rotary instruments and to evaluate root canal filling techniques and flow of root canal obturation materials in the postinstrumented root canal volume using spiral computed tomography (SCT). MATERIALS AND METHODS: Freshly extracted 16 primary molars were randomly divided into two groups and subjected to SCT analysis before and after instrumentation. For the manual technique (group I) with eight teeth were prepared using K files, and rotary (group II) eight teeth preparation was performed with ProTaper files. The filled volume in each canal was measured using SCT, and the percentage of obturated volume was calculated. The data were statistically analyzed using the Mann-Whitney U test. RESULTS: There was a statistically significant difference in both groups' volume of root canals enlarged. Even though both K files and the ProTaper system brought about enlarged canals after instrumentation, there was a statistically significant increase in volume after using K files in two canals. In three canals, there was a statistically significant increase in volume after using ProTaper. Irrespective of the obturation technique and materials used, there is no statistically significant difference in the volume after obturation. CONCLUSION: From the results of this study, the ProTaper file system shows suitable volumetric enlargement up to an optimum level, which is needed in primary root canal walls, and is better in canal shaping, as evidenced by good postobturation volume. CLINICAL SIGNIFICANCE: The traditional method of cleaning and shaping the root canals in permanent teeth using manual stainless-steel files can lead to undesirable curvatures in root canal morphology, making correctly filling the root canals difficult. It is also time-consuming and sometimes leads to iatrogenic errors. Rotary nickel-titanium (Ni-Ti) instrumentation techniques have been developed to overcome these problems. How to cite this article: Yadav DBUC, Varma RB, Kumar JS, et al. Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT. J Contemp Dent Pract 2024;25(3):250-259.

Surface roughness and cyclic fatigue resistance of a novel shaping system: An in-vitro study.

Recently developed Nickel-Titanium (NiTi) instruments with practical changes have resulted in safer instrumentation. In addition, topographical features on the file surface are a contributing factor to clinical durability. Therefore, this study aimed to investigate both the cyclic fatigue resistance and the roughness change of MTwo and Rotate instruments (VDW, Munich, Germany). Each instrument (n = 6/each group) was scanned with an atomic force microscopy prior to and after instrumentation. In addition, cyclic fatigue testing was conducted for each instrument (n = 11/each group) with stainless-steel blocks, including 45°-60°-90° degrees of curvature milled to the instruments' size. The roughness parameters increased for both systems after instrumentation (p<0.05). Both systems presented an increased roughness following instrumentation (p<0.05). The cyclic fatigue resistance was lowest at 90° for both systems (p<0.05), whereas the Rotate files presented a higher resistance than that of the Mtwo files (p<0.05). Compared to the Mtwo files, Rotate files presented better resistance, while the resistance decreased as the curvature increased.

Cone-beam computed tomography evaluation of shaping ability of kedo-S square and fanta AF™ baby rotary files compared to manual K-files in root canal preparation of primary anterior teeth.

BACKGROUND: Pediatric rotary file systems were developed to solve manual file limitations. With many systems available, it may be tricky to select the most appropriate one. AIM: to assess & compare Kedo-S Square, Fanta-AF™-Baby rotary files with manual K-file concerning removed dentin amount, canal transportation, centric ability & root canal taper using CBCT in primary anterior teeth. DESIGN: Extracted Seventy-five upper primary anterior teeth with intact 2/3 root length were collected and divided into three groups based on root canal instrumentation, group-I: prepared using K-file, group-II: prepared using Kedo-S Square, and group-III: prepared using Fanta AF™ Baby file. The teeth were imaged with CBCT before & following canal instrumentation. Then, the removed dentin amount was calculated at each root-canal level. The Kruskal-Wallis test was utilized to statistically analyze study data. RESULT: The difference among the three groups was highly statistically significant at cervical & apical thirds concerning dentin thickness changes on both mesial & distal sides following canal preparation with the least removed dentin in the Kedo-S Square group(P < 0.0001). Regarding transportation & centering ability, a non-significant difference between the three groups was found. 80% of the Fanta AF™ Baby group had good-tapered preparation compared to the Kedo-S Square (72%) and K-file (40%) groups(P < 0.05). CONCLUSION: Kedo-S Square was preferable to Fanta-AFTM-Baby & manual K-files in primary root canal preparation.

Effect of simulated clinical use and sterilization on the cyclic fatigue resistance of nickel titanium files.

Aim: Assess the effect of simulated clinical use and sterilization on the cyclic fatigue resistance of Race Evo and Tia Tornado Blue nickel titanium (NiTi) files. Materials and Methods: For this study, a total of sixty-four NiTi files were selected, with thirty-two files each from two different manufacturers. Files from each manufacturer were subdivided into four subgroups (n = 8) based on the test parameters. The control groups included files that were neither used nor sterilized. Files from the test groups were used to prepare the root canals of extracted mandibular premolars and then sterilized. This procedure was repeated once, twice, or thrice, depending on the test group. All files were then subjected to a cyclic fatigue test. Data was statistically analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Results: No significant difference was observed in the number of cycles to failure (NCF) among the subgroups for both types of files (P = 0.869 for Tia Tornado Blue, P = 0.626 for Race Evo). Tia Tornado Blue files displayed significantly higher NCF values in the control (P = 0.021), once (P = 0.027), and thrice (P = 0.031) usage groups when compared to Race Evo files. Conclusions: Repeated clinical use and sterilization for up to three cycles did not affect the cyclic fatigue resistance of Race Evo and Tia Tornado Blue files.

Effects of different irrigation activation methods on root canal treatment of primary teeth.

There is currently a lack of research on the application of newly developed irrigation techniques in root canal treatment of primary teeth. This study aimed to evaluate the effects of various irrigation activation techniques on two key parameters: apical debris extrusion (ADE) and dentinal tubule penetration depth (DTPD) of the root canal filling material. A total of 96 primary mandibular second molars were randomly divided into 4 groups: Group 1-Conventional Needle Irrigation (CNI), Group 2-XP-Endo Finisher (XPF), Group 3-EndoActivator (EA), and Group 4-Passive Ultrasonic Irrigation (PUI). In all groups, the One Reci single-file system was used for root canal preparation. For ADE measurement, each group was rinsed with distilled water. For DTPD assessment, sodium hypochlorite (NaOCl) was applied. ADE quantification was performed by collecting debris in pre-weighed Eppendorf tubes. A combination of fluorescent dye and root canal filling material (DiaPex Plus) was used for root canal filling. In order to examine DTPD, horizontal cross-sections of the coronal and apical regions of the teeth were taken with a thickness of 1 mm. The maximum and mean DTPD was examined by confocal laser scanning microscopy. Data were analyzed using the Kruskal-Wallis, One-way ANOVA, and Mann-Whitney U tests (p = 0.05). As a result, PUI had the highest mean ADE and CNI had the lowest mean ADE, while CNI had the highest mean DTPD in both the coronal and apical regions, whereas PUI had the lowest mean DTPD in the coronal region, and EA had the lowest mean DTPD in the apical region. There were no statistically significant differences in DTPD and ADE among the four groups. Comparing intragroup maximum DTPD across all groups, it was significantly higher in the coronal region than in the apical region (p < 0.05). ADE and DTPD of root canal filling materials in primary teeth did not differ significantly among CNI, XPF, EA and PUI irrigation activation techniques.

Comparative effects of 17% ethylenediaminetetraacetic acid and 9% etidronic acid applied with different irrigant activation techniques on the release of growth factors from dentin: in vitro study.

BACKGROUND: Growth factors embedded in the extracellular matrix of the dentin play an important role in the migration, proliferation, and differentiation of dental pulp stem cells in regenerative endodontics. In regenerative endodontic treatments, the type of irrigation solution used is crucial for the release of growth factors (GFs) from the dentin matrix. This study evaluated the effectiveness of different irrigant activation techniques (IAT) using two different chelating agents, 17% ethylenediaminetetraacetic acid (EDTA) and 9% etidronic acid (HEDP), in terms of their GF release. METHODS: Seventy-two mandibular premolar teeth were prepared to simulate an open apex. The root fragments were irrigated with 20 ml of 1.5% sodium hypochlorite and 20 ml of saline solution. Eight root fragments were randomly separated for the control group, and the remaining 64 fragments were randomly separated into eight groups based on two different chelating agents (17% EDTA and 9% HEDP) and four different IAT ((conventional needle irrigation (CNI), passive ultrasonic irrigation (PUI), sonic activation with EDDY, and XP-endo Finisher (XPF)). TGF-ß1, VEGF-A, BMP-7 and IGF-1 release levels were determined using an ELISA, and statistical analysis was performed using the Kolmogorov-Smirnov test, ANOVA, and the Tukey test (p < .05). RESULTS: Compared to the control group, the experimental groups showed significantly higher GF release when using EDTA or HEDP. Among the activation groups, the EDDY group triggered the highest GF release, and the CNI group triggered the lowest. CONCLUSIONS: IAT with EDTA and HEDP can increase GF release, with EDDY being the most effective IAT method. Using chelating agents with IAT may be beneficial in regenerative endodontic treatments.

Factors influencing NiTi endodontic file separation: A thematic review.

Nickel-titanium (NiTi) file separation during endodontic treatment is an undesirable event. This phenomenon needs to be understood by knowing the factors influencing fracture in endodontic files. There is a large amount of literature where these factors and their influence have been studied, increasing the knowledge about the mechanisms involved, mainly related to wire technology, file shapes and geometry, operator manipulation, the anatomy of the root canal, and the irrigation and sterilization processes. As many factors are involved, the complexity of the fracture phenomena increases and the isolated correlation of one factor with the file fracture becomes a small part of comprehending the separation phenomena. This thematic review aims to compile important reports from 2014 to 2022 on the factors influencing NiTi file separation. The information obtained was classified into wire technology, file geometry, operational aspects, irrigation and sterilization, and anatomy. For this purpose, the Scopus, Web of Science and ScienceDirect databases were consulted using a search string. Filters were applied to consolidate the final set of relevant papers covering the subject of factors influencing endodontic file separation. It was found that the fracture of NiTi files incorporates different mechanisms that operate simultaneously during the endodontic procedure and strongly affect the instrument performance. The collected information promotes good practices to prevent file separation.

Postoperative pain after single-visit root canal treatments in necrotic teeth comparing instruments' kinematics and apical instrumentation limits - a prospective randomized multicenter clinical trial.

OBJECTIVES: This prospective randomized multicenter clinical trial (PRMCT) investigated postoperative pain after single-visit root canal treatments in teeth affected by pulp necrosis (PN), and asymptomatic apical periodontitis (AAP) (with apical radiolucent areas) or normal periradicular tissues (without apical radiolucent areas) comparing different instruments' kinematics and apical instrumentation limits. METHODS: Before chemomechanical preparation, 240 patients/teeth were randomly distributed into four groups (n = 60) according to the instruments' kinematics (rotary or reciprocating) and apical instrumentation limits (with or without intentional foraminal enlargement [IFE]). After that, specimens were submitted to the same irrigation and obturation techniques, and the patients were referred to undergo the definitive restorations. No medication was prescribed, but the patients were instructed to take either paracetamol (750 mg every 6 h for three days) or ibuprofen (600 mg every 6 h for three days) in pain cases. Postoperative pain incidence and levels were assessed at 24-, 48-, and 72 h following treatment completion according to a verbal rating scale (VRS) following a score. The Kolmogorov-Smirnov test was applied to assess the normality of the data. Mann-Whitney U, Chi-square, Friedman's ANOVA, and Friedman's multiple 2 to 2 comparison tests were employed to identify potential significant statistical differences among the variables in the study groups (P < .05). RESULTS: Significant statistical differences were only observed among the groups considering tooth, periradicular status, and the occurrence of overfilling (sealer extrusion) (P < 0.00). Patients with teeth instrumented through rotary kinematics and without IFE experienced lower rates of postoperative pain; however, this difference was relevant only at 24 h (P < 0.05). CONCLUSIONS: Postoperative pain was lower after using a rotary file system (Profile 04) inserted up to the apical constriction (AC). However, this finding was just statistically meaningful at 24 h. TRIAL REGISTRATION: This PRMCT was approved by the Human Research Ethics Committee of the Paranaense University - UNIPAR, Francisco Beltrão, PR, Brazil (CAAE. 46,774,621.6.0000.0109) on 02/09/2021. It was registered at The Brazilian Registry of Clinical Trials - ReBEC (RBR-3r967t) on 01/06/2023, was performed according to the Principles of the Helsinki Declaration and is reported following the Consolidated Standards of Reporting Trials Statement.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Atypical healing of an endodontic lesion following emergency treatment: a case report.

This case report examines the atypical healing of an endodontic lesion without standard endodontic treatment, influenced by the patient's failure to attend treatment appointments. A 50-year-old woman with no notable medical history presented with a deep carious lesion on her mandibular right first molar, accompanied by localized pain. Citing forgetfulness as a reason, the patient missed her initially scheduled root canal treatment, necessitating an emergency intervention. The emergency treatment included access cavity preparation, irrigation with 5.25% sodium hypochlorite solution, application of a modified triple antibiotic paste (equal parts penicillin G, metronidazole, and ciprofloxacin), and temporary restoration with amalgam. A large apical lesion was detected in immediate postoperative radiographs. However, the patient failed to return for definitive endodontic treatment, due to a lack of symptoms and time for treatment. Follow-up examinations 1 and 5 years after emergency treatment disclosed gradual healing of the lesion, culminating in the establishment of a normal periodontal ligament. This case underscores the potential efficacy of a modified triple antibiotic paste and highlights the importance of a well-sealed coronal restoration in promoting the healing of endodontic lesions, even in the absence of pulpectomy and conventional root canal therapy. Additional research is needed to understand the mechanisms behind such healing events.

Phase-locked µPIV analysis of flow dynamics in a simulated root canal with different laser-activated irrigations.

PURPOSE: To measure the dynamic characteristics of the flow field in a complex root canal model activated by two laser-activated irrigation (LAI) modalities at different activation energy outputs: photon-induced photoacoustic streaming (PIPS) and microshort pulse (MSP). METHODS: A phase-locked micro-scale Particle Image Velocimetry (µPIV) system was employed to characterise the temporal variations of LAI-induced velocity fields in the root canal following a single laser pulse. The wall shear stress (WSS) in the lateral root canal was subsequently estimated from the phase-averaged velocity fields. RESULTS: Both PIPS and MSP were able to generate the 'breath mode' of the irrigant current under all tested conditions. The transient irrigation flush in the root canal peaked at speeds close to 6 m/s. However, this intense flushing effect persisted for only about 2000 µs (or 3% of a single laser-pulse activation cycle). For MSP, the maximum WSS magnitude was approximately 3.08 Pa at an activation energy of E = 20 mJ/pulse, rising to 9.01 Pa at E = 50 mJ/pulse. In comparison, PIPS elevated the WSS to 10.63 Pa at E = 20 mJ/pulse. CONCLUSION: Elevating the activation energy can boost the peak flushing velocity and the maximum WSS, thereby enhancing irrigation efficiency. Given the same activation energy, PIPS outperforms MSP. Additionally, increasing the activation frequency may be an effective strategy to improve irrigation performance further.

Microcomputed tomography analysis of curved root canal preparation when coronal flaring and glide path files used with heat-treated nickel titanium rotary files.

The objective was to evaluate the effect of glide path and coronal flaring on the dentin volume removal and percentage of touched walls in curved canals using two heat-treated rotary files. The mesiobuccal canal of forty-eight, randomly selected, extracted mandibular molars was divided into two groups of 24 each, according to the type of instrument used (RACE EVO and EdgeSequel rotary files). Each group was further divided into three subgroups; Group (A): Control using one file shaped to 04/30, Group (B) with a glide path (EdgeGlidePath (EGP)), and Group (C): with a glide path and coronal flaring (EGP and EdgeTaper Platinum (ETP) SX file respectively). The root canals were then instrumented using the assigned instruments. The assessment was carried out using micro-CT. The comparison of the mean values of the tested groups about dentin volume removal and percentage of untouched walls did not reach statistical significance (p<0.05). Glide path and coronal flaring had an insignificant effect on the dentin volume removal and percentage of untouched walls in curved canals.

Comparative evaluation of ethanol versus citric acid in removal of oil-based calcium hydroxide from the apical third of root canal system.

Objectives: To evaluate the effectiveness of ethanol compared to citric acid in the removal of oil-based calcium hydroxide from the apical third of the root canal system using passive ultrasonic irrigation. METHODS: The in vitro study was conducted from September to October 2021 at the dental clinics of the Aga Khan University Hospital, Karachi, and comprised single-rooted teeth that were selected from institutional bank of extracted teeth. They were randomly divided into group A having 70% ethanol + passive ultrasonic irrigation, group B 10% citric acid + passive ultrasonic irrigation, group C positive controls and group D negative controls. The specimens were sectioned at 1mm and 3mm from the apex and examined under a dental operating microscope. A single examiner scored the specimens on two different occasions. Data was analysed using SPSS 25. RESULTS: Of the 90 teeth, there were 40(44.4%) in each of the 2 experimental groups and 5(5.5%) in each of the 2 control groups. At 3mm apical sections, ethanol was significantly more effective in the removal of oil-based calcium hydroxide (p=0.01). However, at 1mm from the apex, there was no significant difference between the experimental groups (p=0.064). Intragroup comparison showed that for groups A and B, residual medicament at 1mm sections was significantly greater than at 3mm sections (p<0.001, p=0.003). CONCLUSIONS: Neither irrigant showed complete removal at 1mm and 3mm from the apex. However, at 3mm apical sections, 70% ethanol was significantly more effective compared to 10% citric acid.

Post-endodontic pain in curved canals prepared with different rotary instrumentation techniques: A randomized controlled trial.

BACKGROUND: Curved root canals are associated with the highest number of procedural errors during endodontic instrumentation. Recently, numerous rotary instruments have been developed, with both manual and automated mechanisms, to facilitate endodontic treatment and manage the complications related to it. OBJECTIVES: The aim of the study was to assess post-endodontic pain after using the HyFlex® EDM OneFile (HEDM), WaveOne® Gold (WOG) and XP-endo® Shaper (XPS) systems in the preparation of curved canals in patients with asymptomatic irreversible pulpitis. MATERIAL AND METHODS: A total of 45 molars with curved canals and asymptomatic irreversible pulpitis were randomly divided into 3 equal groups based on the instrumentation used: HEDM (group A); WOG (group B); and XPS (group C). All teeth were prepared according to the manufacturers' instructions. Postendodontic pain was assessed using the visual analog scale (VAS) at 6, 12, 18, 24, 48, and 72 h after root canal instrumentation. The data was analyzed using the one-way analysis of variance (ANOVA) and the paired-samples t test with the Bonferroni correction, with a p-value of 0.05 set for statistical significance. RESULTS: The highest levels of post-endodontic pain were recorded at 6 h after treatment. Then, the values gradually decreased until the pain nearly vanished after 72 h. No statistically significant differences were observed in the VAS scores between groups A and B. At the same time, group C showed the lowest VAS scores at all follow-up time points. CONCLUSIONS: The use of the XPS system resulted in the lowest pain scores at all follow-ups. The HEDM and WOG groups showed no differences in the pain scores throughout the whole follow-up period.

[Comparison of the ability of four different kinds of nickel-titanium instruments to prepare simulated resin to simulate curved root canal forming].

PURPOSE: To compare the forming ability of four kinds of nickel-titanium instrument preparation resin for simulated curved root canal. METHODS: A total of 40 single bend resin simulated root canals were randomly divided into 4 groups with 10 in each group. Four kinds of nickel-titanium instruments (ProTaper, HyFlex EDM, WaveOne Gold and Reciproc Blue) were used for root canal preparation, and divided into group A, group B, group C and group D. The preparation time of the four groups was compared, the root canal images before and after preparation were analyzed by computer image analysis software, and the changes of the preparation time, curvature and curvature radius of the four groups were recorded. With the root tip as the center of the circle, the radius of 1-10 mm was selected as concentric circle arcs. The detection points were overlapping root canal intersection points. The resin removal amount and center positioning force of the inner and outer walls of the root canal at different detection points were recorded. Statistical analysis was performed with SPSS 20.0 software package. RESULTS: The root canal preparation time in group A was significant longer than that in group B, C and D(P＜0.05), but there was no significant difference in the curvature and curvature radius of the root canal among the four groups (P＞0.05). The removal amount of resin from the root canal wall in group C was significant lower than that in group A, B and D (P＜0.05) when the distance from the detection point to the apical foramina was 5, 6, 8, 9 and 10 mm, respectively. The removal amount of resin from the outer wall of the root canal in group C was significant lower than that in group A, B and D (P＜0.05) when the distance from the detection point to the apical foramina was 5, 6, 7, 9 and 10 mm, respectively. The root tip offset of group A from the detection point to the apical hole of 1, 2, 3, 4, 6, 7, 8, 9 and 10 mm was significant greater than that of group B, C and D(P＜0.05). CONCLUSIONS: Among the four instruments, ProTaper has the largest apical deviation, HyFlex EDM, WaveOne Gold and Reciproc Blue have better ability of root canal forming.

Evaluation of Postoperative Pain after Using Dexamethasone Intracanal Rinse in Irreversible Pulpitis.

OBJECTIVE: To evaluate the efficacy of dexamethasone as a final intracanal rinse in relieving postoperative pain of teeth with symptomatic irreversible pulpitis. STUDY DESIGN: Randomised controlled trial. Place and Duration of the Study: Department of Operative Dentistry, PIMS, Islamabad, Pakistan, from June 2019 to December 2020. METHODOLOGY: Sixty patients aged 18- 50 years diagnosed with symptomatic irreversible pulpitis were selected according to the inclusion criterion. After obtaining informed consent, root canal therapy (RCT) was initiated under rubber dam. Pulpectomy was done followed by canal preparation. The lottery method was utilised for the division of patients. Group A (experimental) received dexamethasone (4mg/ml in 5ml syringe) as a final rinse, while Group B (control group) recalled after 1 week and asked whether their pain had relieved or not as a yes/no question. After data collection teeth were obturated and permanent restoration was placed. Data were analysed using Chi-square test. RESULTS: The efficacy of dexamethasone as a final intracanal rinse was greater than saline 86.67% and 20.0%, respectively (p < 0.05) in relieving postoperative pain in teeth with symptomatic irreversible pulpitis. CONCLUSION: Dexamethasone was proved to be more efficacious than saline in alleviating postoperative pain when used as a final intracanal rinse after canal instrumentation. KEY WORDS: Irreversible pulpitis, Dexamethasone, Postoperative pain, Pulpectomy.