New methods for resolution of hydroxychloroquine by forming diastereomeric salt and adding chiral mobile phase agent on RP-HPLC.

Hydroxychloroquine (HCQ), 2-([4-([7-Chloro-4-quinolyl]amino)pentyl]ethylamino)ethanol, exhibited significant biological activity, while its side effects cannot be overlooked. The RP-HPLC enantio-separation was investigated for cost-effective and convenient optical purity analysis of HCQ. The thermodynamic resolution of Rac-HCQ, driven by enthalpy and entropy, was achieved on the C18 column using Carboxymethyl-ß-cyclodextrin (CM-ß-CD) as the chiral mobile phase agent (CMPA). The effects of CCM-ß-CD, pH, and triethylamine (TEA) V% on the enantio-separation process were explored. Under the optimum conditions at 24°C, the retention times for the two enantiomers were t R 1 = 29.39 min $$ {t}_{R1}=29.39\ \min $$ and t R 2 = 32.42 min $$ {t}_{R2}=32.42\ \min $$ , resulting in R s = 1.87 $$ {R}_s=1.87 $$ . The resolution via diastereomeric salt formation of Rac-HCQ was developed to obtain the active pharmaceutical ingredient of single enantiomer S-HCQ. Di-p-Anisoyl-L-Tartaric Acid (L-DATA) was proved effective as the resolution agent for Rac-HCQ. Surprisingly, it was found that refluxing time was a key fact affecting the resolution efficiency, which meant the kinetic dominate during the process of the resolution. Four factors-solvent volume, refluxing time, filtration temperature, and molar ratio-were optimized using the single-factor method and the response surface method. Two cubic models were established, and the reliability was subsequently verified. Under the optimal conditions, the less soluble salt of 2L-DATA:S-HCQ was obtained with a yield of 96.9% and optical purity of 63.0%. The optical purity of this less soluble salt increases to 99.0% with a yield of 74.2% after three rounds recrystallization.

Collection and transportation of SARS-CoV-2 and influenza A virus diagnostic samples: Optimizing the usage of guanidine-based chaotropic salts for enhanced biosafety and viral genome preservation.

Many virus lysis/transport buffers used in molecular diagnostics, including the detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA, contain guanidine-based chaotropic salts, primarily guanidine hydrochloride (GuHCl) or guanidine isothiocyanate (GITC). Although the virucidal effects of GuHCl and GITC alone against some enveloped viruses have been established, standardized data on their optimum virucidal concentrations against SARS-CoV-2 and effects on viral RNA stability are scarce. Thus, we aimed to determine the optimum virucidal concentrations of GuHCl and GITC against SARS-CoV-2 compared to influenza A virus (IAV), another enveloped respiratory virus. We also evaluated the effectiveness of viral RNA stabilization at the determined optimum virucidal concentrations under high-temperature conditions (35°C) using virus-specific real-time reverse transcription polymerase chain reaction. Both viruses were potently inactivated by 1.0 M GITC and 2.5 M GuHCl, but the GuHCl concentration for efficient SARS-CoV-2 inactivation was slightly higher than that for IAV inactivation. GITC showed better viral RNA stability than GuHCl at the optimum virucidal concentrations. An increased concentration of GuHCl or GITC increased viral RNA degradation at 35°C. Our findings highlight the need to standardize GuHCl and GITC concentrations in virus lysis/transport buffers and the potential application of these guanidine-based salts alone as virus inactivation solutions in SARS-CoV-2 and IAV molecular diagnostics.

Electroneutralization desalination with spontaneous chemoelectric power generation.

This study designs a novel electroneutralization desalination cell using reaction heat from acidic-alkaline wastewater neutralization to desalinate wastewater and generates chemoelectric power. Several key performance indicators are measured in terms of the energy, environmental and economic aspects of the system, including the ionic flux, the electrical energy produced, the electrical energy consumption for desalination, parasitic losses, overall energy conversion efficiency and desalination performance. The maximum peak power density is ∼31.5 mW/cm2 at 83.5 mA/cm2 and the desalination efficiency is 62 % using brine. The overall energy conversion efficiency is ∼81.8 % and the desalination followed the zero-order reaction. Assuming a 1.5 million litres per day treatment capacity integrated with reverse osmosis, the system has environmental and economic benefits, with 44.5 kg-CO2eq greenhouse gas emissions per cubic meter of treated brine, and a discounted payback period of 4.2 years. This study demonstrates a pioneering electroneutralization technique for self-sufficient brine valorization and wastewater reclamation.

Synthesis, Electronic, and Antibacterial Properties of 3,7-Di(hetero)aryl-substituted Phenothiazinyl N-Propyl Trimethylammonium Salts.

In this study, a library of 3,7-di(hetero)aryl-substituted 10-(3-trimethylammoniumpropyl)10H-phenothiazine salts is prepared. These title compounds and their precursors are reversible redox systems with tunable potentials. The Hammett correlation gives a very good correlation of the first oxidation potentials with σp parameters. Furthermore, the title compounds and their precursors are blue to green-blue emissive. Screening of the salts reveals for some derivatives a distinct inhibition of several pathogenic bacterial strains (Mycobacterium tuberculosis, Staphylococcus aureus, Escherichia coli, Aconetobacter baumannii, and Klebsiella pneumoniae) in the lower micromolar range.

Charge-solvated versus protonated salt forms of cyclodepsipeptide toxins in electrospray: Dissociation of alkali-cationized forms enables straightforward sequencing of cereulide.

Bacillus cereus is responsible for foodborne outbreaks worldwide. Among the produced toxins, cereulide induces nausea and vomiting after 30 min to 6 h following the consumption of contaminated foods. Cereulide, a cyclodepsipeptide, is an ionophore selective to K+ in solution. In electrospray, the selectivity is reduced as [M + Li]+; [M + Na]+ and [M + NH4]+ can also be detected without adding corresponding salts. Two forms are possible for alkali-cationized ions: charge-solvated (CS) that exclusively dissociates by releasing a bare alkali ion and protonated salt (PS), yielding alkali product ions by covalent bond cleavages (CBC) promoted by mobile proton. Based on a modified peptide cleavage nomenclature, the PS product ion series (b, a, [b + H2O] and [b + CnH2nO] [n = 4, 5]) are produced by Na+/Li+/K+-cationized cereulide species that specifically open at ester linkages followed by proton mobilization promoting competitive ester CBC as evidenced under resonant collision activation. What is more, unlike the sodiated or lithiated cereulide, which regenerates little or no alkali cation, the potassiated forms lead to an abundant K+ regeneration. This occurs by splitting of (i) the potassiated CS forms with an appearance threshold close to that of the PS first fragment ion generation and (ii) eight to four potassiated residue product ions from the PS forms. Since from Na+/Li+-cationized cereulide, (i) the negligible Na+/Li+ regeneration results in a higher sensibility than that of potassiated forms that abundantly releasing K+, and (ii) a better sequence recovering, the use of Na+ (or Li+) should be more pertinent to sequence isocereulides and other cyclodepsipeptides.

A comprehensive assessment of the economic and technical viability of a zero liquid discharge (ZLD) hybrid desalination system for water and salt recovery.

Brine, a by-product of desalination and industrial facilities, is becoming more and more of an environmental issue. This comprehensive techno-economic assessment (TEA), focusing on the technical and economic aspects, investigates the performance and viability of a novel hybrid desalination brine treatment system known as zero liquid discharge (ZLD). Notably, this research represents the first instance of evaluating the feasibility and effectiveness of integrating three distinct desalination processes, namely brine concentrator (BC), high-pressure reverse osmosis (HPRO), and membrane-promoted crystallization (MPC), within a ZLD framework. The findings of this study demonstrate an exceptional water recovery rate of 97.04%, while the energy requirements stand at a reasonable level of 17.53 kWh/m3. Financially, the ZLD system proves to be at least 3.28 times more cost-effective than conventional evaporation ponds and offers comparable cost efficiency to alternatives such as land application and deep-well injection. Moreover, the ZLD system exhibits profitability potential by marketing both drinking water and solid salt or solely desalinated water. The daily profit from the sale of generated water varies from US$194.08 to US$281.41, with Greece and Cyprus attaining the lowest and highest profit, respectively. When considering the sale of both salt and water, the profit rises by 8% across all locations.

Developing Salt-Rejecting Evaporators for Solar Desalination: A Critical Review.

Solar desalination, a green, low-cost, and sustainable technology, offers a promising way to get clean water from seawater without relying on electricity and complex infrastructures. However, the main challenge faced in solar desalination is salt accumulation, either on the surface of or inside the solar evaporator, which can impair solar-to-vapor efficiency and even lead to the failure of the evaporator itself. While many ideas have been tried to address this ″salt accumulation″, scientists have not had a clear system for understanding what works best for the enhancement of salt-rejecting ability. Therein, for the first time, we classified the state-of-the-art salt-rejecting designs into isolation strategy (isolating the solar evaporator from brine), dilution strategy (diluting the concentrated brine), and crystallization strategy (regulating the crystallization site into a tiny area). Through the specific equations presented, we have identified key parameters for each strategy and highlighted the corresponding improvements in the solar desalination performance. This Review provides a semiquantitative perspective on salt-rejecting designs and critical parameters for enhancing the salt-rejecting ability of dilution-based, isolation-based, and crystallization-based solar evaporators. Ultimately, this knowledge can help us create reliable solar desalination solutions to provide clean water from even the saltiest sources.

Temperature-responsive salt-resistant poly(sulfobetaine methacrylate)-based emulsifiers for heavy oils.

The emulsions prepared with most currently reported emulsifiers are stable only at room temperature and are susceptible to demulsification at higher temperatures. This thermal instability prevents their use in high-temperature and high-salt environments encountered oilfield extraction. To address this issue, in this study, two temperature-responsive emulsifiers, PSBMA and CS-PSBMA, were synthesized. Both emulsifiers exhibited the ability to form stable emulsions within the temperature range of 60-80 °C and undergo demulsification at 20-40 °C. A comprehensive investigation was conducted to assess the impact of emulsifier concentration, water-to-oil ratio, and salt ion concentration on the stability of emulsions formed by these two emulsifiers. The results demonstrated their remarkable emulsification capabilities across diverse oil phases. Notably, the novel emulsifier CS-PSBMA, synthesized through the grafting chitosan (CS) onto PSBMA, not only exhibits superior emulsion stability and UCST temperature responsiveness but also significantly enhanced the salt resistance of the emulsion. Remarkably, the emulsion maintained its stability even in the presence of monovalent salt ions at concentrations up to 2 mol/L (equivalent to a mineralization level of 1.33 × 105 mg/L in water) and divalent salt ions at concentrations up to 3 mol/L (equivalent to a mineralization level of 2.7 × 105 mg/L in water). The emulsions stabilized by both emulsifiers are resilient to harsh reservoir conditions and effectively emulsify heavy oils, enabling high-temperature emulsification and low-temperature demulsification. These attributes indicate their promising potential for industrial applications, particularly in the field of enhanced oil recovery.

Rationalizing Counterion Selection for the Development of Lipophilic Salts: A Case Study with Venetoclax.

The use of lipid-based formulations (LBFs) can be hindered by low dose loading due to solubility limitations of candidate drugs in lipid vehicles. Formation of lipophilic salts through pairing these drugs with a lipophilic counterion has been demonstrated as a potential means to enhance dose loading in LBFs. This study investigated the screening of appropriate counterions to form lipophilic salts of the BCS class IV drug venetoclax. The physical properties, lipid solubility, and in vitro performance of the salts were analyzed. This study illustrated the versatility of alkyl sulfates and sulfonates as suitable counterions in lipophilic salt synthesis with up to ∼9-fold higher solubility in medium- and long-chain LBFs when compared to that of the free base form of venetoclax. All salts formulated as LBFs displayed superior in vitro performance when compared to the free base form of the drug due to the higher initial drug loadings in LBFs and increased affinity for colloidal species. Further, in vitro studies confirmed that venetoclax lipophilic salt forms using alkyl chain counterions demonstrated comparable in vitro performance to venetoclax docusate, thus reducing the potential for laxative effects related to docusate administration. High levels of the initial dose loading of venetoclax lipophilic salts were retained in a molecularly dispersed state during dispersion and digestion of the formulation, while also demonstrating increased levels of saturation in biorelevant media. The findings of this study suggest that alkyl chain sulfates and sulfonates can act as a suitable alternative counterion to docusate, facilitating the selection of counterions that can unlock the potential to formulate venetoclax as an LBF.

Desalination RO reject brine as a novel-based porous geopolymer for phosphorus removal from contaminated media.

Desalination reverse osmosis reject brine-based porous geopolymer (RO/GP) was produced and investigated as an improved adsorbent for phosphorus (P) removal from tainted seawater, brackish water, river water, and municipal wastewater effluent. The RO reject brine/geopolymer was produced by reacting metakaolin and fly ash with a Na-alkali activator and anhydrous RO brine as a sacrificial template. The influence of RO reject brine content on water absorption, porosity, mechanical, and structural properties were examined. The developed RO-based geopolymers exhibited the greatest porosity (58.3-84.2 % vol%), a significant ratio of open porosity to total porosity (67.7-92.1 %), and outstanding compression strength (3.6-10.4 MPa). The produced RO/GP structure has an adsorption capacity of 92.4 mg-P/g. The sequestration reaction of phosphorus by RO/GP is of pseudo-second-order kinetic behavior via Chi-squared (χ2), RMSE, and determination coefficient (R2) values. Regarding their agreement with Langmuir behavior, the phosphorus adsorption uptakes occur in homogeneous and monolayer states. The reaction is exothermic, spontaneous, and favorable. The RO/GP exhibits significant affinity for phosphorus co-existing with Cl-, Na+, SO42-, K+, HCO3-, and Ca2+. The RO/GP shows high safety during the adsorption investigation, with a total cost of 0.32 $/kg-P.

Reusable, Green, Portable Ionogels Based on Terpyridine-Imidazole Salt for Visual Monitoring of Pork Spoilage.

Ionogels have emerged as a promising approach because they combine the advantageous properties of ionic liquids and gels. Herein, a novel gelator bearing terpyridine and imidazolium salt units was designed and synthesized, which assembled into ionogels in three ionic liquids by a heating-cooling procedure. The properties of ionogels were characterized by FT-IR, UV-vis spectroscopy, POM, XRD, and rheology, and resonance light scattering and opacity measurements were conducted to investigate the gelation kinetics. Furthermore, the ionogels incorporating pH-sensitive dyes (BTB and MR) were exploited as colorimetric sensor to monitor total volatile basic nitrogen (TVB-N) of meat at -4 °C, which can easily and reliably estimate the quality of meat by naked eye recognition, and the results demonstrated a positive correlation between the color variation and TVB-N levels. Notably, the hydrophobic ionogel indicators are more suitable for potential application at high humidity thanks to their antiswelling advantage, which could prevent the inaccurate information produced by hydrogel indicators. In addition, the ionogels could be reused up to three times as colorimetric indicators, suggesting potential applications and competitiveness. Our research sheds new light on the novel application of ionogels in the food industry.

Quality and Flavor Difference in Dry-Cured Meat Treated with Low-Sodium Salts: An Emphasis on Magnesium.

The present study aimed to develop low-sodium curing agents for dry-cured meat products. Four low-sodium formulations (SPMA, SPM, SP, and SM) were used for dry-curing meat. The physicochemical properties and flavor of the dry-cured meat were investigated. The presence of Mg2+ ions hindered the penetration of Na+ into the meat. The weight loss, moisture content, and pH of all low-sodium salt groups were lower than those of S. Mg2+ addition increased the water activity (Aw) of SPMA, SPM, and SM. Dry-curing meat with low-sodium salts promoted the production of volatile flavor compounds, with Mg2+ playing a more prominent role. Furthermore, low-sodium salts also promoted protein degradation and increased the content of free amino acids in dry-cured meat, especially in SM. Principal component analysis (PCA) showed that the low-sodium salts containing Mg2+ were conducive to improving the quality of dry-cured meat products. Therefore, low-sodium salts enriched with Mg2+ become a desirable low-sodium curing agent for achieving salt reduction in dry-cured meat products.

Bifonazole caffeate: The first molecular salt of bifonazole with enhanced biopharmaceutical property based on experiments and quantum chemistry research.

In order to make novel breakthroughs in molecular salt studies of BCS class-IV antifungal medication bifonazole (BIF), a salification-driven strategy towards ameliorating attributes and aiding augment efficiency is raised. This strategy fully harnesses structural characters together attributes and benefits of caffeic acid (CAF) to concurrently enhance dissolvability and permeability of BIF by introducing the two ingredients into the identical molecular salt lattice through the salification reaction, which, coupled with the aroused potential activity of CAF significantly amplifies the antifungal efficacy of BIF. Guided by this route, the first BIF-organic molecular salt, BIF-CAF, is directionally designed and synthesized with satisfactorily structural characterizations and integrated theoretical and experimental explorations on the pharmaceutical properties. Single-crystal X-ray diffraction resolving confirms that there is a lipid-water amphiphilic sandwich structure constructed by robust charge-assistant hydrogen bonds in the salt crystal, endowing the molecular salt with the potential to enhance both dissolvability and permeability relative to the parent drug, which is validated by experimental evaluations. Remarkably, the comprehensive DFT-based theoretical investigations covering frontier molecular orbital, molecular electrostatic potential, Hirshfeld surface analysis, reduced density gradient, topology, sphericity and planarity analysis strongly support these observations, thereby allowing some positive relationships between macroscopic properties and microstructures of the molecular salt can be made. Intriguingly, the optimal properties, together with the stimulated activity of CAF markedly augment in vitro antifungal ability of the molecular salt, with magnifying inhibition zones and reducing minimum inhibitory concentrations. These findings fill in the gaps on researches of BIF-organic molecular salt, and adequately exemplify the feasibility and validity by integrating theoretical and experimental approaches to resolve BIF's problems via the salification-driven tactic.

BODIPY(aryl)iodonium salts in the efficient synthesis of diversely functionalized BODIPYs and selective detection of serum albumin.

BODIPY(aryl)iodonium salts were readily accessible from the high-yielding reaction of BODIPY with iodoarenes or hydroxyl(tosyloxy)iodoarenes in the presence of m-CPBA. The prepared BODIPY(aryl)iodonium salts bearing substituents of varied electronic nature were utilized for the direct syntheses of thiocyanate, azide, amine and acrylate functionalized BODIPYs and ß,ß'-bis-BODIPYs. The regioselective syntheses of α-piperidinyl and ß-piperidinyl substituted BODIPYs were achieved through the reaction of BODIPY(aryl)iodonium salts with piperidine in the absence and presence of copper(I). Expeditious and high yielding (79-82%) synthesis of ß,ß'-bis-BODIPYs was also developed through the palladium-catalyzed reductive coupling of the easily accessible BODIPY(aryl)iodonium salts. Some of the indole-appended BODIPYs and bis-BODIPYs displayed strong absorption in the visible region (∼610 nm). The BODIPY(aryl)iodonium salts also showed significant binding with serum albumin and were observed to be selective serum protein sensors with estimated limits of detection as low as 7 µg mL-1 in some cases.

A systematic comparison of salt removal efficiency in washing treatment by using fly ashes from 13 MSWI plants in China.

Municipal solid waste incineration (MSWI) fly ash contains large amounts of Ca, Si, and other elements, giving it the potential to be used as a raw material for cement production. However, fly ash often contains a high content of salts, which greatly limits its blending ratio during cement production. These salts are commonly removed via water washing, but this process is affected by the nature and characteristics of fly ash. To clarify the influence of the ash characteristics on salt removal, a total of 60 fly ash samples from 13 incineration plants were collected, characterized, and washed. The ash characterization and cluster analysis showed that the incinerator type and flue gas purification technology/process significantly influenced the ash characteristics. Washing removed a high percentage of salts from fly ash, but the removal efficiencies varied significantly from each other, with the chlorine removal efficiency ranging from 73.76% to 96.48%, while the sulfate removal efficiency ranged from 6.92% to 51.47%. Significance analysis further revealed that the salt removal efficiency varied not only between the ash samples from different incinerators, but also between samples collected at different times from the same incinerator. The high variance of the 60 ash samples during salt removal was primarily ascribed to their different mineralogical and chemical characteristics. Mineralogical analysis of the raw and washed ash samples showed that the mineralogical forms and proportion of these salts in each ash sample greatly influenced their removal. The presence of less-soluble and insoluble chloride salts (e.g., CaClOH, Ca2Al(OH)6(H2O)2Cl etc.) in fly ash significantly affected the chlorine removal efficiency. This study also found that Fe, Mn, and Al in fly ash were negatively correlated with the dechlorination efficiency of fly ash. In summary, the different physical and chemical properties of fly ash caused great discrepancies in salt removal. Consequently, it is suggested to consider the potential impact of the ash source and ash generation time on salt removal to ensure a reliable treatment efficiency for engineering applications.

Enhanced properties of a positive-charged nanofiltration membrane containing quaternarized chitosan through second interfacial polymerization for the removal of salts and pharmaceuticals.

Nanofiltration (NF) membrane technology has been widely used in the removal of salts and trace organic pollutants, such as pharmaceuticals and personal care products (PPCPs), due to its superiority. A positive-charged composite NF membrane with an active skin layer was prepared by polyethyleneimine (PEI), trimethyl benzene chloride, and quaternate chitosan (HTCC) through second interfacial polymerization on the polyethersulfone ultrafiltration membrane. The physicochemical properties of the nanocomposite membrane were investigated using surface morphology, hydrophilicity, surface charge, and molecular weight cut-off (MWCO). The influence of the concentration and reaction time of PEI and HTCC was documented. The optimized membrane had a MWCO of about 481 Da and possessed a pure water permeability of 25.37 L·m-2·h-1·MPa-1. The results also exhibited salt rejection ability as MgCl2 > CaCl2 > MgSO4 > Na2SO4 > NaCl > KCl, showing a positive charge on the fabricated membrane. In addition, the membrane had higher rejection to atenolol, carbamazepine, amlodipine, and ibuprofen at 89.46, 86.02, 90.12, and 77.21%, respectively. Moreover, the anti-fouling performance and stability of the NF membrane were also improved.

Enabling superior drug loading in lipid-based formulations with lipophilic salts for a brick dust molecule: Exploration of lipophilic counterions and in vitro-in vivo evaluation.

Lipid-based formulations (LbFs) are an extensively used approach for oral delivery of poorly soluble drug compounds in the form of lipid suspension and lipid solution. However, the high target dose and inadequate lipid solubility limit the potential of brick dust molecules to be formulated as LbFs. Thus, the complexation of such molecules with a lipophilic counterion can be a plausible approach to improve the solubility in lipid-based solutions via reducing drug crystallinity and polar surface area. The study aimed to enhance drug loading in lipid solution for Nilotinib (Nil) through complexation or salt formation with different lipophilic counterions. We synthesized different lipophilic salts/ complexes via metathesis reactions and confirmed their formation by 1H NMR and FTIR. Docusate-based lipophilic salt showed improved solubility in medium-chain triglycerides (∼7 to 7.5-fold) and long-chain triglycerides (∼30 to 35-fold) based lipids compared to unformulated crystalline Nil. The increased lipid solubility could be attributed to the reduction in drug crystallinity which was further confirmed by the PXRD and DSC. Prototype LbFs were prepared to evaluate drug loading and their physicochemical characteristics. The findings suggested that structural features of counterion including chain length and lipophilicity affect the drug loading in LbF. In addition, physical stability testing of formulations was performed, inferring that aliphatic sulfate-based LbFs were stable with no sign of drug precipitation or salt disproportionation. An in vitro lipolysis-permeation study revealed that the primary driver of absorptive flux is the solubilization of the drug and reduced amount of lipid. Further, the in vivo characterization was conducted to measure the influence of increased drug load on oral bioavailability. Overall, the results revealed enhanced absorption of lipophilic salt-based LbF over unformulated crystalline Nil and conventional LbF (drug load equivalent to equilibrium solubility) which supports the idea that lipophilic salt-based LbF enhances drug loading, and supersaturation-mediated drug solubilization, unlocking the full potential of LbF.

Enhancing oxygen reduction reaction performance through eco-friendly chitosan gel-assisted molten salt strategy: Small NiCo alloy nanoparticles decorated with high-loading single Fe-NX.

We developed an effective and eco-friendly strategy using chitosan gel-molten salt to achieve high loading (2.23 At. %) of single Fe-NX as assistive active sites. These sites were combined with small NiCo alloy NPs distributed on porous carbon aerogels to boost the ORR performance. The FeSAs-NiCo alloy@N-C sphere exhibits exceptional mass activity and specific activity of 3.705 A.mg-1 and 8.79 mA.cm-2(ECSA), respectively, at 0.85 V versus RHE. It has a superior onset potential of 1.08 V versus RHE, surpassing that of its nanoparticle Fe counterpart and NiCo alloy@N-C sphere. The significant improvement in ORR performance of the FeSAs-NiCo alloy@N-C sphere could be attributed to the positive effects of increased lattice strain due to the single atoms of Fe-NX hybridized with small NiCo alloy NPs. The chitosan gel-assisted molten salt strategy and assistive active sites of Fe-NX hybridized with NiCo alloy NPs regulate the electronic properties of the FeSAs-NiCo alloy@N-C sphere, both geometrically via lattice strain mismatch and electronically through shifting of the d-band center. This could influence the binding energies for oxygen and/or oxygen reduction intermediate adsorption/desorption. The additional improvement in the ORR performance of the FeSAs-NiCo alloy@N-C sphere also benefits from having a lower electrochemical activation energy.

Purification of exopolysaccharide produced from Lactobacillus spp. using ionic-liquid as adjuvant in alcohol/salt-based aqueous two-phase system for its antidiabetic properties.

Diabetes is a chronic, metabolic disease characterized by hyperglycemia resulting from either insufficient insulin production or impaired cellular response to insulin. Exopolysaccharides (EPS) produced by Lactobacillus spp. demonstrated promising therapeutic potential in terms of their anti-diabetic properties. Extraction and purification of EPS produced by Lactobacillus acidophilus and Limosilactobacillus reuteri were performed using ethanol precipitation, followed by alcohol/salt based aqueous two-phase system (ATPS). The purification process involved ethanol precipitation followed by an alcohol/salt-based ATPS. The study systematically investigated various purification parameters in ATPS, including ethanol concentration, type and concentration of ionic liquid, type and concentration of salt and pH of salt. Purified EPS contents from L. acidophilus (63.30 µg/mL) and L. reuteri (146.48 µg/mL) were obtained under optimum conditions of ATPS which consisted of 30 % (w/w) ethanol, 25 % (w/w) dipotassium hydrogen phosphate at pH 10 and 2 % (w/w) 1-butyl-3-methylimidazolium octyl sulfate. The extracted EPS content was determined using phenol sulphuric acid method. In α-amylase inhibition tests, the inhibitory rate was found to be 92.52 % (L. reuteri) and 90.64 % (L. acidophilus), while in α-glucosidase inhibition tests, the inhibitory rate was 73.58 % (L. reuteri) and 68.77 % (L. acidophilus), based on the optimized parameters selected in ATPS. These results suggest that the purified EPS derived from the postbiotics of Lactobacillus spp. hold promise as potential antidiabetic agents.

Novel drug-drug salt crystals of metformin with ibuprofen or naproxen: Improved solubility, dissolution rate, and synergistic antinociceptive effects.

As the monotherapy of available analgesics is usually accompanied by serious side effects or limited efficacy in the management of chronic pain, multimodal analgesia is widely used to achieve improved benefit-to-risk ratios in clinic. Drug-drug salts are extensively researched to optimize the physicochemical properties of active pharmaceutical ingredients (APIs) and achieve clinical benefits compared with individual APIs or their combination. New drug-drug salt crystals metformin-ibuprofen (MET-IBU) and metformin-naproxen (MET-NAP) were prepared from metformin (MET) and two poorly water-soluble anti-inflammatory drugs (IBU and NAP) by the solvent evaporation method. The structures of these crystals were confirmed by single crystal and powder X-ray diffraction, Hirshfeld surface, Fourier transform infrared spectroscopy and thermal analysis. Both MET-IBU and MET-NAP showed significantly improved solubility and intrinsic dissolution rate than the pure IBU or NAP. The stability test indicated that MET-IBU and MET-NAP have excellent physical stability under stressing test (10 days) and accelerated conditions (3 months). Moreover, isobolographic analysis suggested that MET-IBU and MET-NAP exerted potent and synergistic antinociceptive effects in λ-Carrageenan-induced inflammatory pain in mice, and both of them had an advantage in rapid pain relief. These results demonstrated the potential of MET-IBU and MET-NAP to achieve synergistic antinociceptive effects by developing drug-drug salt crystals.