Effects of arbuscular mycorrhizal fungi on accumulation and translocation of selenium in winter wheat.

BACKGROUND: Selenium (Se) is an essential micronutrient for humans and animals, but not for plants. Generally, cereals including wheat and rice are the main source of dietary Se for humans. Although arbuscular mycorrhizal fungi (AMF) are ubiquitous soil microbes and commonly develop symbionts with winter wheat (Triticum aestivum L.), the influence of AMF on accumulation and translocation of Se during developmental cycle of winter wheat is still unclear. RESULTS: Based on a pot trial, the present results indicated that the effects of AMF on grain Se concentration in winter wheat depend on the Se species spiked in the soil and that Rhizophagus intraradices (Ri) significantly enhanced grain Se concentration under selenite treatment. Moreover, inoculation of AMF significantly increased grain Se content under selenite and selenate treatments. The enhanced grain Se content of mycorrhizal wheat could be attributed to (i) apparently increased root growth of mycorrhizal wheat at jointing could absorb more Se for translocating to aerial tissues and consequently result in significantly higher stalk Se content and (ii) enhancing Se translocation from vegetative tissues to grains. The present study showed that AMF significantly (P < 0.05) increased pre-anthesis Se uptake under selenate treatment and post-anthesis Se uptake under selenite treatment. CONCLUSION: The present study indicated the feasibility of inoculation of AMF for increasing grain Se concentration under selenite treatment and enhancing the efficiency of biofortification of Se under selenate treatments. © 2022 Society of Chemical Industry.

Determination of selenite and selenomethionine in kefir grains by reversed-phase high-performance liquid chromatography-inductively coupled plasma-optical emission spectrometry.

A new and efficient reversed-phase high-performance liquid chromatography-inductively coupled plasma-optical emission spectrometry method was developed for the simultaneous separation and determination of SeO3 2- and seleno-dl-methionine in kefir grains. For the system, limits of detection and quantitation values for SeO3 2- and seleno-dl-methionine were calculated as 0.52/1.73 mg/kg (as Se) and 0.26/0.87 mg/kg (as Se), respectively. After performing the system analytical performance, recovery experiment was done for kefir grains and percent recovery results for SeO3 2- and seleno-dl-methionine were calculated as 98.4 ± 0.8% and 93.6 ± 1.0%, respectively. It followed by the feeding studies that the kefir grains were exposed to three different concentrations of SeO3 2- (20, 30, and 50 mg/kg) for approximately 4 days at room temperature to investigate the conversion/non-conversion of SeO3 2- to seleno-dl-methionine. Next, the fed grains were extracted with tetramethylammonium hydroxide pentahydrate solution (20%, w/w) and then sent to the developed system. There was no detectable seleno-dl-methionine found in fed kefir grains at different concentrations of SeO3 2- while inorganic or elemental selenium in the fed kefir grains was determined between 1579.5 - 3116.0 mg/kg (as Se). Selenium species in the kefir grains samples was found in the form of SeO3 2- proved by using an anion exchange column.

[Characteristics of selenium nanoparticles synthesized by cell-free supernatant Cupriavidus sp. SHE].

In recent years, selenium nanoparticles (SeNPs) have been widely used in many fields such as nanotechnology, biomedicine and environmental remediation due to their good electrical conductivity, photothermal properties and anticancer properties. In this study, the cell-free supernatant, whole cell and the cell-free extracts of the strain Cupriavidus sp. SHE were used to synthesize SeNPs, and several methods were applied to analyze the crystal structure and surface functional groups of the nanoparticles. Finally, Pseudomonas sp. PI1 (G⁺) and Escherichia coli BL21 (G⁻) were selected to investigate the antibacterial properties of SeNPs. Cell-free supernatant, whole cell and cell-free extracts of the strain could synthesize SeNPs. As for the cell-free supernatant, selenite concentration of 5 mmol/L and pH=7 were favorable for the synthesis of SeNPs. TEM images show that the average size of nanospheres synthesized by the supernatant was 196 nm. XRD analysis indicates the hexagonal crystals structure of SeNPs. FTIR and SDS-PAGE confirmed the proteins bound to the surfaces of SeNPs. SeNPs synthesized by cell-free supernatant showed no antimicrobial activities against Pseudomonas sp. PI1 and Escherichia coli BL21 (DE3). These results suggest that proteins played an important role in biotransformation of SeNPs in an eco-friendly process, and SeNPs synthesized in this study were non-toxic and biologically compatible, which might be applied in other fields in the future.

Isolation of selenate from selenite, carbonate, phosphate, and arsenate solutions for δ18O-selenate determination.

Selenium and oxygen isotope systematics can be useful tools for tracing sources and fate of Se oxyanions in water. In order to measure δ18O values of selenate, SeO4 2- must first be sequestered from water by precipitation as BaSeO4(s). However, other dissolved oxyanions insoluble with Ba2+ require removal. Dissolved selenate was separated from dissolved selenite, carbonate, phosphate, and arsenate by addition of Ce3+ cations that quantitatively removed these oxyanions by precipitation as insoluble Ce2(SeO3)3(s), Ce2(CO3)3(s), CePO4(s), and CeAsO4(s), respectively. δ18O-selenate (-8.19 ± 0.17 ‰) did not change after four replicates of selenite removal by Ce2(SeO3)3(s) precipitation and Ce3+ removal by cation exchange (-8.20 ± 0.14, -8.32 ± 0.09, -8.17 ± 0.13, and -8.29 ± 0.13 ‰). δ18O-selenate values (-10.86 ± 0.45 ‰) were preserved also when selenate was pre-concentrated on anion exchange resin, quantitatively retrieved by elution, and processed with Ce3+ to remove interfering oxyanions (-10.77 ± 0.07 ‰). The extraction and purification steps developed here successfully isolated dissolved selenate from interfering oxyanions while preserving δ18O-selenate values. This method should be useful for characterizing δ18O-selenate when present with the co-occurring oxyanions above in laboratory experiments and field sites with high Se concentrations, although further research is required for methods to eliminate any co-occurring sulphate.

Identification of the biliary selenium metabolite and the biological significance of selenium enterohepatic circulation.

Although selenium (Se) is mainly excreted in urine, it has been reported that an unknown Se metabolite is excreted in bile. When we administered selenomethionine (SeMet), selenocyanate or selenite to rats, a common biliary selenometabolite was detected 10 min after administration. The amount of the selenometabolite originating from SeMet was less than that originating from the two inorganic Se compounds, selenocyanate and selenite, suggesting that the transformation from the methylated organic selenocompound, i.e., SeMet, was less efficient than that from the inorganic Se compounds. The common biliary selenometabolite was concretely identified as selenodiglutathione (GSSeSG) by two types of mass spectrometry, i.e., LC-inductively coupled mass spectrometry (ICP-MS) and LC-ESI-Q/TOF. The bile-drained rats had lower urinary Se levels than the sham-operated rats. In addition, the Se amounts in urine plus bile of the bile-drained rats were comparable to the Se amount in the urine of the sham-operated rats. These results suggest that the biliary selenometabolite, GSSeSG, was reabsorbed in the gut and finally excreted in urine. Enterohepatic circulation occurs to maintain Se status in the body.

Selenite removal from wastewater using fungal pelleted airlift bioreactor.

This study investigated the removal of selenite from wastewater using the fungus Asergillus niger KP isolated from a laboratory scale inverse fluidized bed bioreactor. The effect of different carbon sources and initial selenite concentration on fungal growth, pellet formation and selenite removal was first examined in a batch system. The fungal strain showed a maximum selenite removal efficiency of 86% in the batch system. Analysis of the fungal pellets by field-emission scanning electron microscopy, field-emission transmission electron microscopy and energy-dispersive X-ray spectroscopy revealed the formation of spherical-shaped elemental selenium nanoparticles of size 65-100 nm. An increase in the initial selenite concentration in the media resulted in compact pellets with smooth hyphae structure, whereas the fungal pellets contained hair like hyphae structure when grown in the absence of selenite. Besides, a high initial selenite concentration reduced biomass growth and selenite removal from solution. Using an airlift reactor with fungal pellets, operated under continuous mode, a maximum selenite removal of 94.3% was achieved at 10 mg L-1 of influent selenite concentration and 72 h HRT (hydraulic retention time). Overall, this study demonstrated very good potential of the fungal-pelleted airlift bioreactor system for removal of selenite from wastewater. Graphical abstract.

Selenium Uptake and Biotransformation in Brassica rapa Supplied with Selenite and Selenate: A Hydroponic Work with HPLC Speciation and RNA-Sequencing.

Vegetables are an ideal source of human Se intake; it is important to understand selenium (Se) speciation in plants due to the distinct biological functions of selenocompounds. In this hydroponic study, the accumulation and assimilation of selenite and selenate in pak choi (Brassica rapa), a vastly consumed vegetable, were investigated at 1-168 h with HPLC speciation and RNA-sequencing. The results showed that the Se content in shoots and Se translocation factors with selenate addition were at least 10.81 and 11.62 times, respectively, higher than those with selenite addition. Selenite and selenate up-regulated the expression of SULT1;1 and PHT1;2 in roots by over 240% and 400%, respectively. Selenite addition always led to higher proportions of seleno-amino acids, while SeO42- was dominant under selenate addition (>49% of all Se species in shoots). However, in roots, SeO42- proportions declined substantially by 51% with a significant increase of selenomethionine proportions (63%) from 1 to 168 h. Moreover, with enhanced transcript of methionine gamma-lyase (60% of up-regulation compared to the control) plus high levels of methylselenium in shoots (approximately 70% of all Se species), almost 40% of Se was lost during the exposure under the selenite treatment. This work provides evidence that pak choi can rapidly transform selenite to methylselenium, and it is promising to use the plant for Se biofortification.

Assessment of speciation and in vitro bioaccessibility of selenium in Se-enriched Pleurotus ostreatus and potential health risks.

Due to the two-dimensional effect of selenium (Se) to health, which form of Se is most effective for increasing the bioaccessible Se content in P. ostreatus and whether these products have potential health risks are worth considering. Three Se supplements were applied at different application rates into substrates for cultivating P. ostreatus. The total content and speciation of Se in P. ostreatus fruit bodies were analyzed, and the bioaccessibility of Se was determined via an in vitro physiologically based extraction test (PBET). Results showed that P. ostreatus had the highest utilization efficiency with selenite, followed by Se yeast and selenate. Organic Se (46%-90%) was the major Se speciation in P. ostreatus regardless applied Se species. Although the Se bioaccessibility of the gastrointestinal digestion of P. ostreatus was high (70%-92%), the estimated daily intake and target hazard quotient values are all within the safe ranges. Se-enriched P. ostreatus can be safely used as a dietary source of Se for increasing Se intake.

Bioavailability Assessment of Copper, Iron, Manganese, Molybdenum, Selenium, and Zinc from Selenium-Enriched Lettuce.

Cu, Fe, Mn, Mo, Selenium (Se), and Zn bioavailability from selenate- and selenite-enriched lettuce plants was studied by in vitro gastrointestinal digestion followed by an assay with Caco-2 cells. The plants were cultivated in the absence and presence of two concentrations (25 and 40 µmol/L of Se). After 28 days of cultivation, the plants were harvested, dried, and evaluated regarding the total concentration, bioaccessibility, and bioavailability of the analytes. The results showed that biofortification with selenate leads to higher Se absorption by the plant than biofortification with selenite. For the other nutrients, Mo showed high accumulation in the plants of selenate assays, and the presence of any Se species led to a reduction of the plant uptake of Cu and Fe. The accumulation of Zn and Mn was not strongly influenced by the presence of any Se species. The bioaccessibility values were approximately 71%, 10%, 52%, 84%, 71%, and 86% for Cu, Fe, Mn, Mo, Se, and Zn, respectively, and the contribution of the biofortified lettuce to the ingestion of these minerals is very small (except for Se and Mo). Due to the low concentrations of elements from digested plants, it was not possible to estimate the bioavailability for some elements, and for Mo and Zn, the values are below 6.9% and 3.4% of the total concentration, respectively. For Se, the bioavailability was greater for selenite-enriched than selenate-enriched plants (22% and 6.0%, respectively), because selenite is biotransformed by the plant to organic forms that are better assimilated by the cells.

Feed-to-Fillet Transfer of Selenite and Selenomethionine Additives to Plant-Based Feeds to Farmed Atlantic Salmon Fillet.

This study investigated the transfer kinetics of dietary selenite and selenomethionine (SeMet) to the fillet of farmed Atlantic salmon (Salmo salar). The uptake and elimination rate constants of the two selenium (Se) forms were determined in Atlantic salmon fed either selenite- or SeMet-supplemented diets followed by a depuration period. The fillet half-life of selenite and SeMet was 779 ± 188 and 339 ± 103 days, respectively. The elimination and uptake rates were used in a simple one-compartmental kinetic model to predict levels in fillet based on long-term (whole production cycle) feeding with given dietary Se levels. Model predictions for Atlantic salmon fed plant-based feeds low in natural Se and supplemented with either 0.2 mg of selenite or SeMet kg-1 gave a predicted fillet level of 0.042 and 0.058 mg Se kg-1 wet weight, respectively. Based on these predictions and the European Food Safety Authority risk assessment of Se feed supplementation for food-producing terrestrial farm animals, the supplementation with 0.2 mg of selenite kg-1 would likely be safe for the most sensitive group of consumers (toddlers). However, supplementing feed to farm animals, including salmon, with 0.2 mg of SeMet kg-1 would give a higher (114%) Se intake than the safe upper intake limit for toddlers.

Agronomic biofortification of cowpea with selenium: effects of selenate and selenite applications on selenium and phytate concentrations in seeds.

BACKGROUND: Selenium (Se) is a nutrient for animals and humans, and is considered beneficial to higher plants. Selenium concentrations are low in most soils, which can result in a lack of Se in plants, and consequently in human diets. Phytic acid (PA) is the main storage form of phosphorus in seeds, and it is able to form insoluble complexes with essential minerals in the monogastric gut. This study aimed to establish optimal levels of Se application to cowpea, with the aim of increasing Se concentrations. The efficiency of agronomic biofortification was evaluated by the application of seven levels of Se (0, 2.5, 5, 10, 20, 40, and 60 g ha-1 ) from two sources (selenate and selenite) to the soil under field conditions in 2016 and 2017. RESULTS: Application of Se as selenate led to greater plant Se concentrations than application as selenite in both leaves and grains. Assuming human cowpea consumption of 54.2 g day-1 , Se application of 20 g ha-1 in 2016 or 10 g ha-1 in 2017 as selenate would have provided a suitable daily intake of Se (between 20 and 55 µg day-1 ) for humans. Phytic acid showed no direct response to Se application. CONCLUSION: Selenate provides greater phytoavailability than selenite. The application of 10 g Se ha-1 of selenate to cowpea plants could provide sufficient seed Se to increase daily human intake by 13-14 µg d-1 . © 2019 Society of Chemical Industry.

Selenium oxyanion bioconcentration in natural freshwater periphyton.

Selenium (Se) enrichment has been demonstrated to vary by several orders of magnitude among species of planktonic algae. This is a substantial source of uncertainty when modelling Se biodynamics in aquatic systems. In addition, Se bioconcentration data are largely lacking for periphytic species of algae, and for multi-species periphyton biofilms, adding to the challenge of modelling Se transfer in periphyton-based food webs. To better predict Se dynamics in periphyton dominated, freshwater ecosystems, the goal of this study was to assess the relative influence of periphyton community composition on the uptake of waterborne Se oxyanions. Naturally grown freshwater periphyton communities, sampled from five different water bodies, were exposed to environmentally relevant concentrations of selenite [Se(IV)] or selenate [Se(VI)] (nominal concentrations of 5 and 25 µg Se L-1) under similar, controlled laboratory conditions for a period of 8 days. Unique periphyton assemblages were derived from the five different field sites, as confirmed by light microscopy and targeted DNA sequencing of the plastid 23S rRNA gene in algae. Selenium accumulation demonstrated a maximum of 23.6-fold difference for Se(IV) enrichment and 2.1-fold difference for Se(VI) enrichment across the periphyton/biofilm assemblages tested. The assemblage from one field site demonstrated both high accumulation of Se(IV) and iron, and was subjected to additional experimentation to elucidate the mechanism(s) of Se accumulation. Selenite accumulation (at nominal concentrations of 5 and 25 µg Se L-1 and mean pH of 7.5 across all treatment replicates) was assessed in both unaltered and heat-killed periphyton, and in periphyton from the same site grown without light to exclude phototrophic organisms. Following an exposure length of 8 days, all periphyton treatments showed similar levels of Se accumulation, indicating that much of the apparent uptake of Se(IV) was due to non-biological processes (i.e., surface adsorption). The results of this study will help reduce uncertainty in the prediction of Se dynamics and food-chain transfer in freshwater environments. Further exploration of the ecological consequences of extracellular adsorption of Se(IV) to periphyton, rather than intracellular absorption, is recommended to further refine predictions related to Se biodynamics in freshwater food webs.

Sorption of selenite on Tamusu clay in simulated groundwater with high salinity under aerobic/anaerobic conditions.

The sorption behavior of selenite onto the Tamusu clay from a preselected high-level radioactive waste disposal site in Inner Mongolia, China, was first investigated in simulated groundwater with high salinity by batch sorption experiments under aerobic/anaerobic conditions. The results demonstrated that the Kd values rapidly decreased and then remained steady in the pH range of 2.0-8.0. However, selenite sorption was promoted when pH exceeded 8.0, which might be attributed to the coprecipitation between Ca2+ and SeO32-. Besides, the change trend of the Kd values as functions of various parameters was not affected by oxygen. The sorption kinetics and isotherms could be well fitted by the pseudo-second-order kinetic model and the Freundlich model for both aerobic and anaerobic conditions, and the calculated thermodynamic parameters (△G and △H) suggested that the selenite sorption process was a spontaneous and endothermic process. Additionally, the XPS results revealed that Se(IV) could be reduced to Se (0) only in anaerobic conditions and that the different amounts of Fe on the clay surface led to the discrepancy of the Se(IV) Kd values under aerobic and anaerobic conditions even in high-salt simulated groundwater. Overall, our findings in this study are significant in regards to the retardation of selenite on the host rock under high salinity conditions.

Systematic study on the reduction efficiency of ascorbic acid and thiourea on selenate and selenite at high and trace concentrations.

Selenate (Se(VI)) and selenite (Se(IV)) are common soluble wastewater pollutants in natural and anthropogenic systems. We evaluated the reduction efficiency and removal of low (0.02 and 2 mg/L) and high (20 and 200 mg/L) Se(IV)(aq) and Se(VI)(aq) concentrations to elemental (Se0) via the use of ascorbic acid (AA), thiourea (TH), and a 50-50% mixture. The reduction efficiency of AA with Se(IV)(aq) to nano- and micro-crystalline Se0 was ≥ 95%, but ≤ 5% of Se(VI)(aq) was reduced to Se(IV)(aq) with no Se0. Thiourea was able to reduce ≤ 75% of Se(IV)(aq) to bulk Se0 at lower concentrations but was more effective (≥ 90%) at higher concentrations. Reduction of Se(VI)(aq)→Se (IV)(aq) with TH was ≤ 75% at trace concentrations which steadily declined as the concentrations increased, and the products formed were elemental sulfur (S0) and SnSe8-n phases. The reduction efficiency of Se(IV)(aq) to bulk Se0 upon the addition of AA+TH was ≤ 81% at low concentrations and ≥ 90% at higher concentrations. An inverse relation to what was observed with Se(IV)(aq) was found upon the addition of AA+TH with Se(VI)(aq). At low Se(VI)(aq) concentrations, AA+TH was able to reduce more effectively (≤ 61%) Se(VI)(aq)→Se(IV)(aq)→Se0, while at higher concentrations, it was ineffective (≤ 11%) and Se0, S0, and SnSe8-n formed. This work helps to guide the removal, reduction effectiveness, and products formed from AA, TH, and a 50-50% mixture on Se(IV)(aq) and Se(VI)(aq) to Se0 under acidic conditions and environmentally relevant concentrations possibly found in acidic natural waters, hydrometallurgical chloride processing operations, and acid mine drainage/acid rock drainage tailings. Graphical Abstract ᅟ.

Characteristics of Time-Dependent Selenium Biofortification of Rice ( Oryza sativa L.).

The application of selenite to soil has increasingly been used to produce Se-enriched food. This study investigated the biofortification characteristics of Se in rice after application of selenite to soil at different growth stages. The results showed that the application of Se during booting stage resulted in the highest concentration of Se in brown rice due to the highest upward translocation of Se. More than 90% of Se in the brown rice was organic species, with selenomethionine predominated. The proportion of selenomethionine in the brown rice decreased with the delay in application time. The rice grown in the acidic soil had higher Se concentrations than in the neutral soil. With increasing soil Cd level, Se accumulation and the proportion of Se-methylselenocysteine in the brown rice were reduced. This study provides a theoretical basis for the production of Se-enriched rice in clean soil or slightly to moderately Cd-contaminated soil.

Speciation of Selenium in Brown Rice Fertilized with Selenite and Effects of Selenium Fertilization on Rice Proteins.

Foliar Selenium (Se) fertilizer has been widely used to accumulate Se in rice to a level that meets the adequate intake level. The Se content in brown rice (Oryza sativa L.) was increased in a dose-dependent manner by the foliar application of sodium selenite as a fertilizer at concentrations of 25, 50, 75, and 100 g Se/ha. Selenite was mainly transformed to organic Se, that is, selenomethionine in rice. Beyond the metabolic capacity of Se in rice, inorganic Se also appeared. In addition, four extractable protein fractions in brown rice were analyzed for Se concentration. The Se concentrations in the glutelin and albumin fractions saturated with increasing Se concentration in the fertilizer compared with those in the globulin and prolamin fractions. The structural analyses by fluorescence spectroscopy, Fourier transform infrared spectrometry, and differential scanning calorimetry suggest that the secondary structure and thermostability of glutelin were altered by the Se treatments. These alterations could be due to the replacements of cysteine and methionine to selenocysteine and selenomethionine, respectively. These findings indicate that foliar fertilization of Se was effective in not only transforming inorganic Se to low-molecular-weight selenometabolites such as selenoamino acids, but also incorporating Se into general rice proteins, such as albumin, globulin glutelin, and prolamin, as selenocysteine and selenomethionine in place of cysteine and methionine, respectively.

Effect of selenium on the uptake kinetics and accumulation of and oxidative stress induced by cadmium in Brassica chinensis.

Pak choi can readily accumulate cadmium (Cd) into its edible parts; this can pose a threat to human health. Although not essential for higher plants, selenium (Se) can be favorable for plant growth and antioxidative defense under heavy metal stress conditions. A pak choi hydroponic experiment was conducted to investigate the effect of two forms of Se on the Cd uptake kinetics and accumulation and oxidative stress. The results showed that selenite and selenate remarkably enhanced Cd uptake kinetics in pak choi. The maximum Cd uptake rate increased by more than 100% after treatment with 5 µM of selenite and selenate, and it further increased after treatment with 20 µM of both Se forms. The effects of Se on Cd content depended on the Se form, exposure time, and Cd dosage. Selenite reduced the Cd content in shoots by 41% after 3 days of treatment with 10 µM Cd, whereas selenate increased this rate by 89%. Both forms of Se decreased Cd content in the shoots by 40% after 7 days of treatment with 10 µM Cd, but they increased the Cd content by approximately 30% after treatment with 50 µM Cd. Se enhanced Cd-induced oxidative stress in pak choi. Malondialdehyde (MDA) generation was promoted by more than 33% by selenite and selenate treatments in combination with 10 µM Cd, and it was further enhanced by 106% and 185% at 50 µM Cd, respectively. Selenite also increased the H2O2 content at both Cd doses, but selenate did not have significant effects on H2O2 production. The effects of Se on antioxidative enzyme activity also depended on the dose of Cd. Selenite and selenate inhibited catalase activity by 11% and 29%, respectively, at 10 µM Cd, and by 13% and 42%, respectively, at 50 µM Cd. Moreover, both forms of Se increased superoxide dismutase activity after treatment with 10 µM Cd but inhibited its activity at 50 µM Cd. Therefore, Se exhibits dual effects on Cd accumulation and oxidative stress in pak choi and might cause further stress when combined with higher doses of Cd.

Effects of selenium application on Se content and speciation in Lentinula edodes.

Edible fungi have strong ability to transform inorganic Se into organic forms. Therefore, different concentrations of selenite, selenate and Se-yeast were injected as Se-supplements into substrates to produce Se-enriched Lentinula edodes. The Se content and its speciation distribution in the fruit bodies of L. edodes were analysed at different harvest times. Results indicate that Se concentrations of L. edodes increased first and then decreased over time. Based on Se accumulation in L. edodes, selenium use efficiency was ranked as selenite > selenate > Se-yeast. SeMet was the predominant Se speciation in the fruit bodies of L. edodes. SeMet made up the biggest proportion of total Se content and increased with application time for selenite and selenate treatments, whereas no significant change was found for Se-yeast treatment. This study demonstrates that Se-enriched L. edodes is a good source of dietary Se.

Organic selenium, selenate, and selenite accumulation by lake plankton and the alga Chlamydomonas reinhardtii at different pH and sulfate concentrations.

Selenium (Se) concentrations measured in lake planktonic food chains (microplankton <64 µm, copepods, and Chaoborus larvae) were strongly correlated with the concentrations of dissolved organic Se. These correlations were strengthened slightly by adding the concentrations of dissolved selenate to those of organic Se. To better understand the role of Se species and the influence of water chemistry on Se uptake, we exposed the green alga Chlamydomonas reinhardtii to selenite, selenate, or selenomethionine at various H+ ion and sulfate concentrations under controlled laboratory conditions. At low sulfate concentrations, inorganic Se species (selenate >> selenite) were more readily accumulated by this alga than was selenomethionine. However, at higher sulfate concentrations the uptake of selenite was higher than that of selenate, whereas the uptake of selenomethionine remained unchanged. Although the pH of the exposure water did not influence the uptake of selenate by this alga, the accumulation of selenomethionine and selenite increased with pH because of their relative pH-related speciation. The Se concentrations that we measured in C. reinhardtii exposed to selenomethionine were 30 times lower than those that we measured in field-collected microplankton exposed in the same laboratory conditions. This difference is explained by the taxa present in the microplankton samples. Using the present laboratory measurements of Se uptake in microplankton and of natural Se concentrations in lake water allowed us to model Se concentrations in a lake pelagic food chain. Environ Toxicol Chem 2018;37:2112-2122. © 2018 SETAC.

Simultaneous leaching of arsenite, arsenate, selenite and selenate, and their migration in tunnel-excavated sedimentary rocks: I. Column experiments under intermittent and unsaturated flow.

Rocks excavated in tunnel construction projects for roads and railways throughout Japan often leached out hazardous trace elements like arsenic (As) and selenium (Se) upon their exposure to the environment. In nature, the various oxyanionic species of As and Se not only coexist but also exhibit contrasting adsorption-desorption behaviors, so speciation is a crucial factor in their migration through natural geologic media. In this study, the leaching and transport of arsenite (AsIII), arsenate (AsV), selenite (SeIV) and selenate (SeVI) in four tunnel-excavated rocks from the Cretaceous-Paleocene Yezo forearc basin were investigated using laboratory column experiments supplemented by batch leaching experiments. The single- and consecutive-batch leaching results revealed that AsIII, AsV, SeIV and SeVI were released simultaneously, which could be attributed to the rapid dissolution of trace evaporite salts found in the rocks. Arsenic in the leachates was also predominated by AsV while SeIV and SeVI concentrations were nearly equal, which are both consistent with predictions of equilibrium Eh-pH diagrams. Under intermittent and unsaturated flow, however, periods when AsIII and SeVI predominated in the effluents were observed. Spatial distributions of As and Se species with depth at the end of the column experiments suggest that migrations of AsIII, AsV and SeIV were delayed, the extent of which depended on the rock. These results indicate that migration and speciation of As and Se in the rocks are controlled by preferential adsorption-desorption reactions, the effects of which were most probably magnified by changes in the pH and concentrations of coexisting ions due to intermittent and unsaturated flow.