Study of chromium, selenium and bromine concentrations in blood serum of patients with parenteral nutrition treatment using total reflection X-ray fluorescence analysis.

Total reflection X-ray fluorescence analysis (TXRF) was used to determine chromium, selenium and bromine concentrations in blood serum samples of 50 patients with parenteral nutrition treatment. The concentrations were measured two times, namely in the first day (I measurement) of the treatment and the seventh day (II measurement) after the chromium and selenium supplementation. For comparison purposes also serum samples of 50 patients without nutritional disorders, admitted to a planned surgical procedure to remove the gall bladder (cholecystectomy), were analyzed and treated as the control group. Descriptive statistics of measured concentrations of Cr, Se and Br both for the studied and control groups was determined. In order to check the effectiveness of Cr and Se supplementation, the results of the first and seventh day measurements for studied group were statistically compared with each other, with literature reference values and with the results of the control group (two-group comparison). These comparisons indicate the effectiveness of selenium supplementation in the applied treatment procedure. In the case of Cr and Br concentrations no statistically significant differences were observed. We conclude that monitoring of the concentration of the important trace elements in human serum should be standard procedure in parenteral nutrition treatment. In this monitoring the TXRF technique can be successfully used.

Determination of selenium in dietary supplements by optical emission spectrometry after alkaline dissolution and subsequent headspace solid phase microextraction.

Headspace solid phase microextraction (HSSPME) of chemically generated selenium hydride from alkaline solution followed by thermal desorption (TD) coupled directly to a microwave plasma (MWP) source has been examined for the optical emission spectrometric (OES) determination of Se. Various chemical and operating parameters including the NaBH(4) and HCl concentrations as well as the fiber exposure time and desorption temperature have been optimized. Alternatively, continuous hydride generation (HG) from alkaline medium and inductively coupled plasma (ICP) may be used for Se determination by OES. With the procedure developed, the determination of Se in dietary supplements at the tens of µgg(-1) level and an accuracy of 3-6% could be performed even in the presence of the 1000-fold excess of Fe and Cu. Additionally, Se was determined in the NIST 8418 material (Wheat gluten) with a certified concentration of Se of 2.58 ± 0.19 µgg(-1), and a value of 2.45 ± 0.25 µgg(-1) was found using HG-HSSPME-MWP-OES. The detection limit for Se (3.2 ng ml(-1)) with the proposed procedure was comparable to those obtained with HG-ICP-OES and the calibration curve was linear of about 2 orders of magnitude.

Defining reference values of trace elements in the tear film: diagnostic methods and possible applications.

The study has been performed on tears of apparently healthy subjects who live and work in urban and rural areas, respectively. After the collection the following elements were investigated: chromium (Cr); arsenic (As); copper (Cu); zinc (Zn); selenium (Se); rubidium (Rb); barium (Ba); lead (Pb) and cobalt (Co). Significantly higher values of As were found in subjects living and working in rural areas as compared to those found in urban area residents (0.290 vs. 0.025; p<0.001). Conversely, Ba and Pb were significantly lower in rural area residents (1.10 vs. 2.50, p=0.027 and 1.70 vs. 1.10, p=0.057, respectively). Our data show that trace elements analysis in tears is possible; further studies could define if it could be a reliable biomarker in persons exposed to high concentration of trace elements due to working or environmental reasons.

Selenium exposure in subjects living in areas with high selenium concentrated drinking water: results of a French integrated exposure assessment survey.

BACKGROUND: Selenium is an essential element which can be toxic if ingested in excessive quantities. The main human exposure is food. In addition, intake may be boosted by consumption drinking water containing unusual high selenium concentration. OBJECTIVE: We measured the individual selenium level of people exposed to selenium concentration in drinking water greater than the maximum recommended limit which is 10 µg/L. METHODS: We carried out a prospective cohort study on 80 adults (40 exposed subjects i.e. living in the involved area and 40 non-exposed ones i.e. living elsewhere) in western France. We used three different approaches: (1) direct measurement of ingested selenium by the duplicate portion method, (2) dietary reconstitution with a food frequency questionnaire (FFQ) and (3) evaluation of the individual selenium status by measuring the selenium content in toenail clippings. Analyses were performed by inductively coupled plasma-mass spectrometry. The association between toenail selenium concentration and area of residence was analyzed using linear regression with repeated measurements. RESULTS: We estimated selenium intake from FFQ at 64±14 µg/day for exposed subjects as opposed to 52±14 µg/day for the non-exposed ones. On the basis of 305 duplicate diet samples, average intake was estimated at 64±26 µg/day for exposed subjects. Area of residence (p=0.0030) and smoking (p=0.0054) were independently associated with toenail selenium concentration. CONCLUSION: Whatever method used for estimating selenium intake, the selenium level in this studied area with high selenium concentrated drinking water is much lower than in seleniferous areas.

Whole blood selenium levels in healthy adults from the west of Algeria.

The purpose of this study was to assess whole blood selenium levels of 300 healthy adults living in four selected areas of the west of Algeria. Selenium was measured using differential pulse cathodic stripping voltammetry with a detection limit of 29.20 µg/L. The mean of whole blood selenium concentrations was 85.65 ± 21.60 µg/L ranging between 30.90 and 144.04 µg/L. This concentration did not vary significantly (P > 0.05) in relation to the gender of the subject, with concentrations of 87.75 ± 21.30 µg/L in men and 83.95 ± 21.60 µg/L in women group. Individuals older than 60 years had a whole blood selenium concentration significantly lower than the rest of the population. However, the measured selenium concentrations in the residential areas were not statistically different (P > 0.05). A total of 32 (10.70%) individuals exhibited whole blood selenium level below 60 µg/L. These results are similar to those of some European countries but are much lower than data observed in USA or seleniferous regions.

Technical issues affecting the implementation of US Environmental Protection Agency's proposed fish tissue-based aquatic criterion for selenium.

The US Environmental Protection Agency is developing a national water quality criterion for selenium that is based on concentrations of the element in fish tissue. Although this approach offers advantages over the current water-based regulations, it also presents new challenges with respect to implementation. A comprehensive protocol that answers the "what, where, and when" is essential with the new tissue-based approach in order to ensure proper acquisition of data that apply to the criterion. Dischargers will need to understand selenium transport, cycling, and bioaccumulation in order to effectively monitor for the criterion and, if necessary, develop site-specific standards. This paper discusses 11 key issues that affect the implementation of a tissue-based criterion, ranging from the selection of fish species to the importance of hydrological units in the sampling design. It also outlines a strategy that incorporates both water column and tissue-based approaches. A national generic safety-net water criterion could be combined with a fish tissue-based criterion for site-specific implementation. For the majority of waters nationwide, National Pollution Discharge Elimination System permitting and other activities associated with the Clean Water Act could continue without the increased expense of sampling and interpreting biological materials. Dischargers would do biotic sampling intermittently (not a routine monitoring burden) on fish tissue relative to the fish tissue criterion. Only when the fish tissue criterion is exceeded would a full site-specific analysis including development of intermedia translation factors be necessary.

Updated estimates of the selenomethionine content of NIST wheat reference materials by GC-IDMS.

Updated estimates of the selenomethionine content of four NIST wheat reference materials have been obtained by use of a revised gas chromatography-stable-isotope dilution mass spectrometric method. The revised method makes use of digestion with methanesulfonic acid, which enables more complete recovery of endogenous selenomethionine than was previously achieved by overnight denaturing treatment in 0.1 mol L(-1) HCl. The NIST wheat reference materials each contain approximately 55% of their total Se content as selenomethionine. Information about forms of Se in reference materials adds value to these materials in Se speciation studies. Estimates of selenomethionine content are also provided for other wheat samples, including several grown under conditions of exposure to high Se levels. These samples also contain approximately 55% of their total Se content as selenomethionine. The consistent level of 55% of total selenium occurring in the form of selenomethionine when the total selenium content varies by a factor of 500 is suggestive of an active mechanism of incorporation of selenium into wheat grain. Figure Selenomethionine content of wheat samples.

Trace metal concentrations in edible tissue of snapper, flathead, lobster, and abalone from coastal waters of Victoria, Australia.

The concentrations of heavy metals in the edible tissue of commonly fished species of the Victorian coast of Australia are reported. The metals studied were As, Cd, Cu, Hg, Pb, Se, and Zn and the fish species examined were snapper (Pagruss auratus), flathead (Platycephalus bassenssis and Neoplatycephalus richardsoni), lobster (Jasus edwardsii), and abalone (Haliotis rubra). None of the fish species studied had average concentrations exceeding the maximum levels specified for As, Cd, Hg, and Pb by the Food Standards Australia and New Zealand Food Standards code. Additionally, the concentrations of Cu, Se, and Zn were close to or below the median values generally expected in these species. Essential trace elements Se and Zn were found to be well regulated by all fish species. Although also essential, Cu was not so well regulated, especially in abalone. Nonessential metals As, Cd, and Hg are not regulated in the studied fish and their concentrations in the fish tissue are dependent on size and fishing zone. Metal concentrations were not largely affected by sex. Surprisingly, the concentrations of metals in fish in Port Phillip Bay, a zone, which includes the major cities of Melbourne and Geelong and is known to have high concentrations of metals in the water and sediment, were not consistently higher than those in other less-populated fishing zones.

[HG-AFS determination of Se in Trionyx triunguis].

The Se content in Trionyx triunguis was studied by atom fluorescence photometer with wet digestion. The recovery of the method is 96.2%-103.0%, relative standard deviation is 3.69%, the determined value of national standard substance pork are agree with standard value; and the method is simple, convenient, fast with good accuracy and precision. The results showed that Se in Trionyx triunguis was very rich, more 1.2-9.4 than Se contant in animal meal, more ten to hundred then it in refresh vegetables and fruits. These results provide a useful scientific base for making and exploiting healtyful foods with Se trionyx triunguis.

Setting site-specific water-quality standards by using tissue residue thresholds and bioaccumulation data. Part 2. Calculating site-specific selenium water-quality standards for protecting fish and birds.

In a companion paper, a method for deriving tissue residue-based site-specific water-quality standards (SSWQSs) was described. In this paper, the methodology is applied to selenium (Se) as an example. Models were developed to describe Se bioaccumulation in aquatic-dependent bird eggs and whole fish. A simple log-linear model best described Se accumulation in bird eggs (r2 = 0.50). For fish, separate hockey stick regressions were developed for lentic (r2 = 0.65) and lotic environments (r2 = 0.37). The low r2 value for the lotic fish model precludes its reliable use at this time. Corresponding tissue residue criteria (i.e., tissue thresholds) for bird eggs and whole fish also were identified and example model predictions were made. The models were able to predict SSWQSs over a wide range of water-tissue combinations that might be encountered in the environment. The models also were shown to be sensitive to variability in measured tissue residues with relatively small changes in variability (as characterized by the standard error) resulting in relatively large differences in SSWQSs.

Validation of method for total selenium determination in yeast by flame atomic absorption spectrometry.

A procedure using open digestion followed by flame atomic absorption spectrometry is described for measuring the total selenium content of Se-enriched yeast. The limits of detection and quantitation were 2.5 mg/L and 5 mg/L Se, respectively. The signal response was linear over the range of 5-50 mg/L Se, and the average recovery from spiked samples was 98.9%. The validated method was used to measure the Se content of Se-enriched yeast reference material and produced a result of 2145 +/- 38 mg/kg (n = 3), which is in good agreement with the certified level of 2125 +/- 65 mg/kg.

Selenomethionine contents of NIST wheat reference materials.

Values of the total selenium and selenomethionine (Semet) content of four wheat-based reference materials have been obtained by gas chromatography-stable isotope dilution mass spectrometry methods. The total Se method is an established one, and the results obtained with it are consistent with previously-assigned values. The Semet method (previously reported by our laboratory) is based on reaction with CNBr. Our data indicate that the four wheat samples (wheat gluten, durum wheat, hard red spring wheat, and soft winter wheat), though having a 30-fold range in total Se content, all have about 45% of their total Se values in the form of selenomethionine. Investigation of the CNBr-based method suggests that additional experiments are needed to verify that all selenomethionine in the wheat samples is accounted for, but also indicates that the values obtained are within 15% of the true values. As the form in which Se occurs in foods and dietary supplements is important from a nutritional perspective, adding information about Se speciation to total Se values in appropriate reference materials makes these materials more valuable in relevant analytical work.

Determination of selenium in marine biological tissues by transverse heated electrothermal atomic absorption spectrometry with longitudinal Zeeman background correction and automated ultrasonic slurry sampling.

A fast, sensitive, and reliable method for determination of selenium in marine biological tissues by electrothermal atomic absorption spectrometry with slurry sampling was developed. Slurries were prepared from fresh and frozen seafood samples that were previously homogenized, dried, and ground; particle sizes <100 microm were taken for analysis. A 3% (v/v) HNO3 solution containing 0.01% (v/v) Triton X-100 was used as slurry diluent. Slurries were mixed on an automated ultrasonic slurry sampler at 20% amplitude for 30 s just before an aliquot was injected into the furnace. The method was successfully validated against the following certified reference materials: NRCC CRM DORM-2 (Dogfish muscle); NRCC CRM TORT-2 (Lobster hepatopancreas); NRCC CRM DOLT-2 (Dogfish liver); and BCR CRM 278 (Mussel tissue), and was subsequently applied to determination of Se in 10 marine biological samples. The influences of the drying procedure (oven-, microwave-, and freeze-drying), matrix modifier amount, mass of solid material in cup, and pipetting sequence are discussed. The limit of determination of Se was 0.16 microg/g and the repeatability, estimated as between-batch precision, was in the range of 4-8%. Se contents in the samples ranged from 0.6 to 2.8 microg/g. The proposed method should be useful for fast assessment of the daily dietary intake of Se.

Antioxidants: what role do they play in physical activity and health?

Exercise appears to increase reactive oxygen species, which can result in damage to cells. Exercise results in increased amounts of malondialdehyde in blood and pentane in breath; both serve as indirect indicators of lipid peroxidation. However, not all studies report increases; these equivocal results may be due to the large intersubject variability in response or the nonspecificity of the assays. Some studies have reported that supplementation with vitamins C and E, other antioxidants, or antioxidant mixtures can reduce symptoms or indicators of oxidative stress as a result of exercise. However, these supplements appear to have no beneficial effect on performance. Exercise training seems to reduce the oxidative stress of exercise, such that trained athletes show less evidence of lipid peroxidation for a given bout of exercise and an enhanced defense system in relation to untrained subjects. Whether the body's natural antioxidant defense system is sufficient to counteract the increase in reactive oxygen species with exercise or whether additional exogenous supplements are needed is not known, although trained athletes who received antioxidant supplements show evidence of reduced oxidative stress. Until research fully substantiates that the long-term use of antioxidants is safe and effective, the prudent recommendation for physically active individuals is to ingest a diet rich in antioxidants.

Toxicity considerations when revising the Nordic nutrition recommendations.

The Nordic countries have issued common nutrition recommendations since 1980. In connection with the 3rd revision, a joint working group of nutritionists and toxicologists assessed the toxicology of selected trace elements. Values for upper limits of intake were established for iron, zinc, iodine and selenium. The safety factors between the lowest intakes at which adverse effects had been reported and the suggested upper limits of intake were small. In the toxicological evaluation of upper safe intake levels of essential trace elements, interactions between trace elements as well as long-term exposure to moderately elevated trace element intakes have to be considered.

Selenium and zinc levels in surgical patients receiving total parenteral nutrition.

The zinc and selenium levels of 40 surgical patients were monitored pre- and post-TPN. The initial selenium level was low normal, and the initial zinc level was also low. Both selenium and zinc are potent antioxidants involved in cellular defense against free radicals. Surgical patients are at risk for selenium and zinc deficiencies secondary to both increased needs and losses. TPN blood work protocols should include monitoring of selenium and zinc with supplementation of the nutrient solutions, as required.

Risk assessment of essential trace elements: new approaches to setting recommended dietary allowances and safety limits.

By definition, every essential trace element must have a range of intakes safe from toxicity but adequate enough to meet nutrition requirements. That range is part of the total dose-response curve and its lower and upper limits are delineated on the basis of nutrition and toxicology data, respectively. Close coordination of activities to set these limits is necessary to avoid recommendations that are either impractical (narrow zones of safe and adequate intakes) or contradictory (overlapping limits, i.e., no zones of safe and adequate intakes).