Predictive factors for postoperative outcomes after reverse shoulder arthroplasty: a systematic review.

BACKGROUND: The use of reverse total shoulder arthroplasty (RTSA) has increased at a greater rate than other shoulder procedures. In general, clinical and functional outcomes after RTSA have been favorable regardless of indication. However, little evidence exists regarding patient specific factors associated with clinical improvement after RTSA. Predicting postoperative outcomes after RTSA may support patients and physicians to establish more accurate patient expectations and contribute in treatment decisions. The aim of this study was to determine predictive factors for postoperative outcomes after RTSA for patients with degenerative shoulder disorders. METHODS: EMBASE, PubMed, Cochrane Library and PEDro were searched to identify cohort studies reporting on predictive factors for postoperative outcomes after RTSA. Authors independently screened publications on eligibility. Risk of bias for each publication was assessed using the QUIPS tool. A qualitative description of the results was given. The GRADE framework was used to establish the quality of evidence. RESULTS: A total of 1986 references were found of which 11 relevant articles were included in the analysis. Risk of bias was assessed as low (N = 7, 63.6%) or moderate (N = 4, 36.4%). According to the evidence synthesis there was moderate-quality evidence indicating that greater height predicts better postoperative shoulder function, and greater preoperative range of motion (ROM) predicts increased postoperative ROM following. CONCLUSION: Preoperative predictive factors that may predict postoperative outcomes are: patient height and preoperative range of motion. These factors should be considered in the preoperative decision making for a RTSA, and can potentially be used to aid in preoperative decision making. LEVEL OF EVIDENCE: Level I; Systematic review.

Tuberoplasty reduces resistance force in dynamic shoulder abduction for irreparable rotator cuff tears: a cadaveric biomechanical study.

BACKGROUND: Arthroscopic tuberoplasty is an optional technique for managing irreparable rotator cuff tears. However, there is a lack of studies investigating the resistance force during shoulder abduction in cases of irreparable rotator cuff tears and tuberoplasty. HYPOTHESES: In shoulders with irreparable rotator cuff tears, impingement between the greater tuberosity (GT) and acromion increases the resistance force during dynamic shoulder abduction. Tuberoplasty is hypothesized to reduce this resistance force by mitigating impingement. STUDY DESIGN: Controlled laboratory study. METHODS: Eight cadaveric shoulders, with a mean age of 67.75 years (range, 63-72 years), were utilized. The testing sequence included intact rotator cuff condition, irreparable rotator cuff tears (IRCTs), burnishing tuberoplasty, and prosthesis tuberoplasty. Burnishing tuberoplasty refers to the process wherein osteophytes on the GT are removed using a bur, and the GT is subsequently trimmed to create a rounded surface that maintains continuity with the humeral head. Deltoid forces and actuator distances were recorded. The relationship between deltoid forces and actuator distance was graphically represented in an ascending curve. Data were collected at five points within each motion cycle, corresponding to actuator distances of 20 mm, 30 mm, 40 mm, 50 mm, and 60 mm. RESULTS: In the intact rotator cuff condition, resistance forces at the five points were 34.25 ± 7.73 N, 53.75 ± 7.44 N, 82.50 ± 14.88 N, 136.25 ± 30.21 N, and 203.75 ± 30.68 N. In the IRCT testing cycle, resistance forces were 46.13 ± 7.72 N, 63.75 ± 10.61 N, 101.25 ± 9.91 N, 152.5 ± 21.21 N, and 231.25 ± 40.16 N. Burnishing tuberoplasty resulted in resistance forces of 32.25 ± 3.54 N, 51.25 ± 3.54 N, 75.00 ± 10.69 N, 115.00 ± 10.69 N, and 183.75 ± 25.04 N. Prosthesis tuberoplasty showed resistance forces of 29.88 ± 1.55 N, 49.88 ± 1.36 N, 73.75 ± 7.44 N, 112.50 ± 7.07 N, and 182.50 ± 19.09 N. Both forms of tuberoplasty significantly reduced resistance force compared to IRCTs. Prosthesis tuberoplasty further decreased resistance force due to a smooth surface, although the difference was not significant compared to burnishing tuberoplasty. CONCLUSION: Tuberoplasty effectively reduces resistance force during dynamic shoulder abduction in irreparable rotator cuff tears. Prosthesis tuberoplasty does not offer a significant advantage over burnishing tuberoplasty in reducing resistance force. CLINICAL RELEVANCE: Tuberoplasty has the potential to decrease impingement, subsequently reducing resistance force during dynamic shoulder abduction, which may be beneficial in addressing conditions like pseudoparalysis.

Risk factors of poor mid-term shoulder functional outcomes of osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures: a retrospective study with a minimum 5-year follow-up.

BACKGROUND: Osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures yields satisfactory bone union rates; however, it may adversely affect postoperative shoulder function. To date, factors affecting mid- or long-term shoulder functional outcomes following intramedullary nail fixation have not been clarified. In this study, we aimed to identify the risk factors for poor mid-term functional outcomes over 5 years postoperatively following antegrade intramedullary nail osteosynthesis for humeral shaft fractures. METHODS: We retrospectively identified 33 patients who underwent surgery using an antegrade intramedullary nail for acute traumatic humeral shaft fractures and were followed up for at least 5 years postoperatively. We divided the patients into clinical failure and no clinical failure groups using an age- and sex-adjusted Constant score of 55 at the final follow-up as the cutoff value. We compared preoperative, perioperative, and postoperative factors between the two groups. RESULTS: Five of the 33 patients had poor shoulder functional outcomes (adjusted Constant score < 55) at a mean follow-up of 7.5 years postoperatively. Proximal protrusion of the nail at the time of bone union (P = 0.004) and older age (P = 0.009) were significantly associated with clinical failure in the univariate analyses. Multivariate analysis showed that proximal protrusion of the nail (P = 0.031) was a risk factor for poor outcomes. CONCLUSIONS: The findings of this study provide new information on predictive factors affecting mid-term outcomes following osteosynthesis using antegrade nails. Our results demonstrated that proximal protrusion of the nail was significantly associated with poor mid-term functional shoulder outcomes. Therefore, particularly in older adults, it is essential to place the proximal end of the intramedullary nail below the level of the articular cartilage.

Experimental guide wire placement for total shoulder arthroplasty in glenoid models: higher precision for patient-specific aiming guides compared to standard technique without learning curve.

BACKGROUND: Patient-specific aiming devices (PSAD) may improve precision and accuracy of glenoid component positioning in total shoulder arthroplasty, especially in degenerative glenoids. The aim of this study was to compare precision and accuracy of guide wire positioning into different glenoid models using a PSAD versus a standard guide. METHODS: Three experienced shoulder surgeons inserted 2.5 mm K-wires into polyurethane cast glenoid models of type Walch A, B and C (in total 180 models). Every surgeon placed guide wires into 10 glenoids of each type with a standard guide by DePuy Synthes in group (I) and with a PSAD in group (II). Deviation from planned version, inclination and entry point was measured, as well as investigation of a possible learning curve. RESULTS: Maximal deviation in version in B- and C-glenoids in (I) was 20.3° versus 4.8° in (II) (p < 0.001) and in inclination was 20.0° in (I) versus 3.7° in (II) (p < 0.001). For B-glenoid, more than 50% of the guide wires in (I) had a version deviation between 11.9° and 20.3° compared to ≤ 2.2° in (II) (p < 0.001). 50% of B- and C-glenoids in (I) showed a median inclination deviation of 4.6° (0.0°-20.0°; p < 0.001) versus 1.8° (0.0°-4.0°; p < 0.001) in (II). Deviation from the entry point was always less than 5.0 mm when using PSAD compared to a maximum of 7.7 mm with the standard guide and was most pronounced in type C (p < 0.001). CONCLUSION: PSAD enhance precision and accuracy of guide wire placement particularly for deformed B and C type glenoids compared to a standard guide in vitro. There was no learning curve for PSAD. However, findings of this study cannot be directly translated to the clinical reality and require further corroboration.

Subscapularis Management in Anatomic Total Shoulder Arthroplasty A Review.

Surgical management of the subscapularis tendon is critical to a successful outcome following anatomic total shoulder arthroplasty. However, the optimal surgical technique for adequate exposure of the glenohumeral joint while mini-mizing complications resulting from subscapularis tendon dysfunction continues to be controversial. Common surgical techniques for the management of the subscapularis tendon include tenotomy, peeling, sparing, and lesser tuberosity oste-otomy. Despite a number of published studies comparing these techniques, no consensus has been reached regarding optimal management. This article reviews the extensive literature on the biomechanical, radiologic, and clinical outcomes of each technique, including recently published comparison studies.

Biomechanical study of 3D-printed titanium alloy pad for repairing glenoid bone defect.

Background: The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. Methods: The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. Results: The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (p < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (p < .05). However, there was no significant difference in humerus displacement between groups D and A (p > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (p < .05). Conclusion: The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.

Metaverse, virtual reality and augmented reality in total shoulder arthroplasty: a systematic review.

PURPOSE: This systematic review aims to provide an overview of the current knowledge on the role of the metaverse, augmented reality, and virtual reality in reverse shoulder arthroplasty. METHODS: A systematic review was performed using the PRISMA guidelines. A comprehensive review of the applications of the metaverse, augmented reality, and virtual reality in in-vivo intraoperative navigation, in the training of orthopedic residents, and in the latest innovations proposed in ex-vivo studies was conducted. RESULTS: A total of 22 articles were included in the review. Data on navigated shoulder arthroplasty was extracted from 14 articles: seven hundred ninety-three patients treated with intraoperative navigated rTSA or aTSA were included. Also, three randomized control trials (RCTs) reported outcomes on a total of fifty-three orthopedics surgical residents and doctors receiving VR-based training for rTSA, which were also included in the review. Three studies reporting the latest VR and AR-based rTSA applications and two proof of concept studies were also included in the review. CONCLUSIONS: The metaverse, augmented reality, and virtual reality present immense potential for the future of orthopedic surgery. As these technologies advance, it is crucial to conduct additional research, foster development, and seamlessly integrate them into surgical education to fully harness their capabilities and transform the field. This evolution promises enhanced accuracy, expanded training opportunities, and improved surgical planning capabilities.

Nontyphoidal salmonella septic arthritis in A patient with systemic lupus erythematosus: A case report.

We report a case of septic arthritis in a 43-year-old female patient. Despite initial treatment with ceftriaxone for Nontyphoidal Salmonella based on blood and joint fluid culture results, the shoulder joint pain worsened. Suspected systemic lupus erythematosus associated synovitis did not respond to immunosuppressive therapy including methylprednisolone, hydroxychloroquine and methotrexate. Subsequent radiograph revealed a shoulder joint abscess, leading to arthroscopic joint debridement. Ceftriaxone was administered post-operatively until analgesic efficacy was attained. This case highlights the significance of accurate diagnosis and appropriate treatment for nontyphoidal Salmonella septic arthritis.

Factors influencing shoulder stiffness after open reduction and internal fixation of proximal humeral fractures.

OBJECTIVES: The study aimed to investigate the factors associated with shoulder stiffness following open reduction and internal fixation (ORIF) of proximal humeral fractures. PATIENTS AND METHODS: The retrospective study included a total of 151 patients who underwent ORIF of proximal humeral fractures between January 2016 and May 2021. Based on their shoulder joint motion at the latest follow-up, the patients were divided into two groups. The stiffness group (n=32; 8 males, 24 females; mean age: 62.4±9.3 years; range, 31 to 79 years), exhibited restricted shoulder forward flexion (<120°), limited arm lateral external rotation (<30°), and reduced back internal rotation below the L3 level. The remaining patients were included in the non-stiffness group (n=119; 52 males, 67 females; mean age: 56.4±13.4 years; range, 18 to 90 years). Various factors were examined to evaluate the association with shoulder stiffness following ORIF of proximal humeral fractures by multivariate unconditional logistic regression models. RESULTS: The mean follow-up duration was 31.8±12.6 (range, 12 to 68) months. Based on the results of the multivariate regression analysis, it was found that high-energy injuries [compared to low-energy injuries; adjusted odds ratio (aOR)=7.706, 95% confidence interval (CI): 3.564-15.579, p<0.001], a time from injury to surgery longer than one week (compared to a time from injury to surgery equal to or less than one week; aOR=5.275, 95% CI: 1.7321-9.472, p=0.031), and a body mass index (BMI) >24.0 kg/m2 (compared to a BMI between 18.5 and 24.0 kg/m2 ; aOR=4.427, 95% CI: 1.671-11.722, p=0.023) were identified as risk factors for shoulder stiffness following ORIF of proximal humeral fractures. CONCLUSION: High-energy injury, time from injury to surgery longer than one week, and BMI >24.0 kg/m2 were identified as independent risk factors for shoulder stiffness after proximal humeral fracture surgery, which should be treated with caution in clinical treatment.

Biomechanical Characteristics of Glenosphere Orientation Based on Tilting Angle and Overhang Changes in Reverse Shoulder Arthroplasty.

Background: Glenoid position and inclination are important factors in protecting against scapular notching, which is the most common complication that directly affects the longevity of reverse shoulder arthroplasty (RSA). This study aimed to investigate the biomechanical characteristics of glenosphere orientation, comparing neutral tilt, inferior overhang with an eccentric glenosphere at the same placement of baseplate, and inferior tilt after 10° inferior reaming in the lower part of the glenoid in RSA. Methods: Nine cadaveric shoulders were tested with 5 combinations of customized glenoid components: a centric glenosphere was combined with a standard baseplate (group A); an eccentric glenosphere to provide 4-mm inferior overhang than the centric glenosphere was combined with a standard baseplate (group B); a centric glenosphere was combined with a wedge-shaped baseplate tilted inferiorly by 10° with the same center of rotation (group C); an eccentric glenosphere was attached to a wedge-shaped baseplate (group D); and 10° inferior reaming was performed on the lower part of the glenoid to apply 10° inferior tilt, with a centric glenosphere secured to the standard baseplate for simulation of clinical tilt (group E). Impingement-free angles for adduction, abduction, forward flexion, external rotation, and internal rotation were measured. The capability of the deltoid moment arm for abduction and forward flexion, deltoid length, and geometric analysis for adduction engagement were evaluated. Results: Compared with neutral tilt, inferior tilt at the same position showed no significant difference in impingement-free angle, moment arm capability, and deltoid length. However, group D resulted in better biomechanical properties than a central position, regardless of inferior tilt. Group E demonstrated a greater range of adduction, internal and external rotation, and higher abduction and forward flexion capability with distalization, compared to corresponding parameters for inferior tilt with a customized wedge-shaped baseplate. Conclusions: A 10° inferior tilt of the glenosphere, without changing the position of the baseplate, had no benefit in terms of the impingement-free angle and deltoid moment arm. However, an eccentric glenosphere had a significant advantage, regardless of inferior tilt. Inferior tilt through 10° inferior reaming showed better biomechanical results than neutral tilt due to the distalization effect.

Complications and Reinterventions of Reverse Total Shoulder Arthroplasty in a Korean Population: 14-Year Experience in Reverse Shoulder Arthroplasty.

Background: There are few reports on the revision or reintervention of reverse total shoulder arthroplasty (RTSA) in South Korea. The purpose of this study was to evaluate the true incidence of complications and reintervention of RTSA and clinical and radiological outcomes based on our 14-year experience in RTSA in a Korean population. Methods: Between March 2008 and June 2022, 412 consecutive cases of RTSA were performed in 388 patients with an average age of 74.4 years at our institute. Excluding 23 patients lost to follow-up, 365 patients (373 shoulders including 8 bilateral cases) who underwent primary RTSA with more than 6 months of follow-up were enrolled in this study. We evaluated those who had complications or reintervention including revision RTSA for failed RTSA. Patient charts were reviewed, and clinical outcomes including clinical scores, complications, and reintervention and radiologic outcomes were evaluated at the last follow-up. Results: Among the 373 shoulders that underwent primary RTSA, complications were found in 50 patients (13.94%, 10 men and 40 women with a mean age of 75.9 ± 6.7 years [range, 51-87 years]). The causes of complications were as follows: 13 acromion, coracoid, or scapular spine fractures, 10 loosening (glenoid: 5, humeral stem: 5), 5 infections, 4 periprosthetic fractures, 2 instability, 2 neurologic complications, and 14 miscellaneous complications. Twenty patients (5.63%, 4 men and 16 women with a mean age of 74.2 ± 8.2 years [range, 51-87 years]) underwent reintervention. The interval to the first reintervention was 27.8 ± 23.1 months (range, 0.1-78 months). The causes of reintervention (20 cases) were 8 loosening (glenoid: 4, humeral stem: 4), 5 infections, 5 fractures, and 2 instability. Among them, 15 component revisions (4.02%) were performed. At the last follow-up, American Shoulder and Elbow Surgeons, University of California at Los Angeles, and Simple Shoulder Test scores were improved from 25.4, 12.4, and 1.6 preoperatively to 40.4, 16.2, and 3.2, respectively. Forward flexion (48° to 87°), abduction (52° to 79°), external rotation (18° to 22°), and internal rotation (buttock to L2) were improved. Conclusions: After primary RTSA in a Korean population, the complication, reintervention, and revision rates were 13.94%, 5.63%, and 4.02%, respectively. Careful evaluation of the complications and adequate treatments should be performed.

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter: comparison of clinical, radiographic and patient reported outcomes in a matched cohort.

BACKGROUND: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. MATERIALS AND METHODS: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups. RESULTS: In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p > 0.485). CONCLUSIONS: Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates.

The Influence of Component Design and Positioning on Soft-Tissue Tensioning and Complications in Reverse Total Shoulder Arthroplasty: A Review.

¼ Reverse total shoulder arthroplasty was designed to function in the rotator cuff deficient shoulder by adjusting the glenohumeral center of rotation (COR) to maximize deltoid function.¼ Adjustments in the COR ultimately lead to changes in resting tension of the deltoid and remaining rotator cuff, which can affect implant stability and risk of stress fracture.¼ Soft-tissue balance and complication profiles can be affected by humeral component (version, neck shaft angle, and inlay vs. onlay) and glenoid component (sagittal placement, version, inclination, and lateralization) design and application.¼ A good understanding of the effects on soft-tissue balance and complication profile is critical for surgeons to best provide optimal patient outcomes.

Investigation of the pressure value while performing biceps tenodesis for superior capsuler reconstruction.

BACKGROUND: To compare the histopathological results of biceps tenodesis (BT) performed with normal, low, and high pressures for superior capsule reconstruction (SCR) in rabbits with massive rotator cuff tears. MATERIALS AND METHODS: Thirty rabbits were divided into three groups. Rabbits 1-10 underwent SCR with BT at the same pressure (Group 1), value measured in the groove; 50% lower (Group 2); 50% higher (Group 3). After the 4-week follow-up, shoulder were en-bloc excised and histopathological evaluation was performed with modified Bonar's scale. Results were compared between the groups, statistically. RESULTS: Extracellular matrix were significantly lower in group 2 compared to the other groups (p < 0.05). Cellularity levels were significantly lower in group 2 compared to the other groups (p < 0.05). Group 2 had no difference between the sides (p > 0.05). Group 2 had lower vascularity levels compared to the other groups (p = 0.01). DICSUSSION: When the biceps tendon was in the bicipital groove and in a more mobile state with lower pressure exposure. BT performed with a tension that creates less pressure than the biceps in the groove is more successful in SCR.

Management of Bone Loss in Posterior Glenohumeral Shoulder Instability: Current Concepts.

¼ Posterior glenohumeral instability is relatively uncommon compared with anterior instability, but is becoming an increasingly recognized and surgically managed shoulder pathology.¼ Soft-tissue stabilization alone may not be sufficient in patients who present with substantial bone loss to the posterior glenoid and/or the anterior humeral head.¼ For posterior glenoid defects, posterior glenoid osteoarticular augmentation can be used, and posterior glenoid opening wedge osteotomy can be considered in cases of posterior instability with pathologic retroversion.¼ For humeral head lesions, several surgical treatment options are available including subscapularis transposition into the humeral head defect, autograft or allograft reconstruction, humeral rotation osteotomy, and shoulder arthroplasty.

Are Lower Passive Anterior Elevation and External Rotation at 6 Weeks Postoperatively Associated With Healing of Isolated Arthroscopic Supraspinatus Repairs?

BACKGROUND: Despite advancements in surgical technique, failure of tendon healing remains a common problem after arthroscopic rotator cuff repair (ARCR). PURPOSE/HYPOTHESIS: The purpose of this study was to examine the relationship between range of motion (ROM) recovery and healing after ARCR. It was hypothesized that an early loss of ROM would be associated with tendon healing. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: This was a retrospective comparative study of primary ARCR of isolated full-thickness supraspinatus (SSN) tendon tears. Cases were retrieved from a prospective rotator cuff repair database and divided into 2 groups based on healing (healed/nonhealed). A standardized clinical evaluation was performed before and at 6 weeks, 3 months, and 6 months after surgery. Collected data included passive and active ROM, visual analog scale for pain, and Constant score. Healing was assessed by ultrasound at 6 months. RESULTS: Of 1397 eligible ARCRs, 1207 were included. The healing rate was 86.7%. Age was higher in the nonhealed group (57.8 ± 7.9 years vs 61.6 ± 8.8 years; P < .001). Patients with healed repairs had a larger decrease in passive anterior elevation (AE) from the preoperative to the 6-week postoperative visit (-31°± 28° vs -18°± 26°; P < .001), followed by a more substantial increase throughout the remaining follow-up period (32°± 23° vs 18°± 21°; P < .001). At 6 months postoperatively, there was no difference in AE between groups (159°± 17° vs 161°± 14°; P > .999). External rotation elbow at side (ER1) and internal rotation hand in the back (IR1) followed similar courses of recovery. Passive and active ROM had a strong positive correlation at each follow-up. Age (odds ratio [OR], 1.79; 95% CI, 1.45-2.23; P < .001) and 6-week passive AE (OR, 1.33; 95% CI, 1.20-1.48; P < .001) and ER1 (OR, 1.15; 95% CI, 1.03-1.29; P = .017) were predictors for nonhealing. CONCLUSION: Lower passive AE and ER1 at 6 weeks postoperatively and younger age are associated with healing after ARCR of isolated SSN tendon tears. At 6 months postoperatively, there were no differences in ROM, regardless of tendon healing.

Comparison of Return to Sports and Competition After the Arthroscopic Bristow-Latarjet Procedure Versus Arthroscopic Bankart Repair in Adolescents With Recurrent Anterior Shoulder Instability.

BACKGROUND: The use of isolated soft tissue repair versus bone block stabilization for the treatment of recurrent anterior shoulder instability in adolescents has no scientific evidence. PURPOSE: To compare the clinical outcomes of adolescent patients who underwent isolated arthroscopic Bankart (iB) repair with those who underwent the arthroscopic Bristow-Latarjet procedure in addition to Bankart (BLB) repair. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A total of 60 shoulders in adolescents (aged 13-18 years) were reviewed with a minimum 2 years' follow-up: iB repair (n = 36) and arthroscopic Bankart repair with an additional Bristow-Latarjet procedure (BLB; n = 24). The characteristics of the patients in each group in terms of age at the first instability episode, age at surgery, hyperlaxity, participation in at-risk sports, and Instability Severity Index Score were comparable. The mean follow-up was longer in the iB group (7.7 vs 4.1 years, respectively), whereas the rates of patients engaged in competition and those with glenoid lesions were higher in the BLB group. The primary outcome measures were failure, defined as the recurrence of instability (clinical dislocation or subluxation), and return to sports. The mean follow-up was 6.2 years (range, 2-16 years). RESULTS: At the last follow-up, the rate of recurrence was significantly higher in the iB group, with 22% (8/36) failures, than in the BLB group, with 8% (2/24) instability recurrences (P < .05). The rate of return to sports at the same level was significantly higher after the BLB repair than after iB repair (79% vs 47%, respectively; P < .001). No statistical difference was found in patient-reported outcome scores between treatment groups (P > .05). Although failures occurred early after the BLB repair, 88% of failures after iB repair occurred after 2 years. On multivariate analysis, adolescents in the iB group with >3 episodes of preoperative dislocation and shoulder hyperlaxity (external rotation >90°) had a 60% recurrence rate (P < .005). CONCLUSION: Adolescent patients undergoing the BLB repair had a lower rate of recurrent instability and higher rates of return to sports and competition than those undergoing iB repair. Patients with shoulder hyperlaxity (external rotation >90°) and >3 dislocations had an unacceptable failure rate of 60% after iB repair.