Silica aerogel coated on metallic wire by phase separation of polystyrene for in-tube solid phase microextraction.

In this research, an attempt was made toward synthesizing a sol-gel-based silica aerogel and its subsequent coating on a copper wire by phase separation of polystyrene. Adaption of this new approach enabled us to coat the metallic wire with powder materials. The use of this method for coating, led to the formation of a porous and thick structure of silica aerogel. The coated wire was placed in a needle and used as the sorbent for in-tube solid phase microextraction of chlorobenzenes (CBs). The superhydrophobicity of sorbent on extraction efficiency was investigated by using different ratios of tetraethylorthosilicate/methyltrimethoxysilane. The surface coated with the prepared silica aerogel by the phase separation of polystyrene showed high contact angle, approving the desired superhydrophobic properties. Effects of major parameters influencing the extraction efficiency including the extraction temperature, extraction time, ionic strength, desorption time were investigated and optimized. The limits of detection and quantification of the method under the optimized condition were 0.1-1.2 and 0.4-4.1ngL-1, respectively. The relative standard deviations (RSD%) at a concentration level of 10ngL-1 were between 4 and 10% (n=3). The calibration curves of CBs showed linearity from 1 to100ngL-1. Eventually, the method was successfully applied to the extraction of model compounds from real water samples and relative recoveries varied from 88 to 115%.

In vitro evaluation of the effectiveness of new water-stable cationic carbosilane dendrimers against Acanthamoeba castellanii UAH-T17c3 trophozoites.

Acanthamoeba is one of the most common free-living amoebas which is widespread in the environment and can infect humans, causing diseases such as keratitis and encephalitis. In this paper we examine for the first time the amebicidal activity of the family of cationic dendrimers nG-[Si{(CH(2))(3)N(+)(Me)(Et)(CH(2))(2)NMe(3) (+)}2I(-)]( x ) (where n denotes the generations: zero (n = 0, x = 1), first (n = 1, x = 4), and second (n = 2, x = 8); for simplicity, they were named as 0G-CNN2, 1G-CNN8, and 2G-CNN16, respectively) against Acanthamoeba castellanii UAH-T17c3 trophozoites. In order to test the amebicidal activity, we cultured the strain A. castellanii UAH-T17c3 in PYG-Bactocasitone medium and later, we treated it with different concentrations of these dendrimers and monitored the effects and damage by optical count, flow cytometry, and scanning electron microscopy. The results showed that all the nanosystems assayed had a strong amebicidal activity. The dendrimer 1G-CNN8 was the most effective against the amoeba. In the morphology of treated throphozoites of A. castellanii UAH-T17c3 analyzed by light and scanning electron microscopy techniques, morphological changes were evident in amoeba cells, such as loss of pseudopodia, ectoplasm increase, roundness, and cellular lysis. Furthermore, flow cytometry results showed alterations in cell granularity, which was dose-time dependent. In conclusion, this family of cationic carbosilane dendrimers has a strong amebicidal activity against the trophozoites of A. castellanii UAH-T17c3 in vitro. They could potentially become new agents significant to the development of new amebicidal compounds for prevention and therapy of Acanthamoeba infections.

Selective adsorption of organosilane molecules along step edges of atomically flattened Si(111) surfaces.

We investigate the selective adsorption of organosilane molecules (3-aminopropyltriethoxysilane (APTES) and octadecyltrichlorosilane (OTS)) at the step edges of a flattened Si(111) surface by atomic force microscopy. The flattened Si(111) surface is formed by dipping a vicinal Si(111) wafer into ultralow-dissolved-oxygen water after treatment with HF. The selective adsorption of these organosilanes is achieved only when the Si(111) sample is pretreated with a Cu-containing solution to form Cu wires along the step edges of the Si(111) surface. This is probably due to the simultaneous formation of one-dimensional Si oxide covered with hydroxyl (OH) groups underneath Cu wires during the electroless reduction of Cu ions in water. At the step edges, APTES and OTS molecules are adsorbed as disperse clusters and as rows of bumps, respectively. The reason for this difference is still unclear, but a key factor is probably the control of the moisture content in the environment. The step edges, which are functionalized by organosilane molecules with various terminations such as -NH2 and -CH3, are expected to be utilized in novel nanoscale devices and processes.

Annealing of silica to reduce the concentration of isolated silanols and peak tailing in reverse phase liquid chromatography.

Non-porous, colloidal silica particles were annealed at three different temperatures, 800, 900 and 1050 °C. The adsorption of lysozyme, a probe of surface roughness, was consistent with progressively reduced surface roughness as temperature increased. The heat treated silica particles were rehydroxylated and then used to pack UHPLC columns. The cationic protein lysozyme was used to probe silanol activity, which exhibited progressively less tailing as the annealing temperature increased. FTIR spectroscopy confirmed that the abundance of isolated silanols on the surface was reduced by annealing at 900 °C or 1050 °C. FTIR also revealed that there was markedly increased hydrogen bonding of the isolated silanols to neighbors after rehydroxylation. These results combine to support the hypothesis that (a) isolated silanols on silica cause tailing in RP-LC and (b) nonplanar topography gives rise to isolated silanols.

Palladium-catalyzed cross-coupling reactions of organosilanols and their salts: practical alternatives to boron- and tin-based methods.

In the panoply of modern synthetic methods for forming carbon-carbon and carbon-heteroatom bonds, the transition metal-catalyzed cross-coupling of organometallic nucleophiles with organic electrophiles enjoys a preeminent status. The preparative utility of these reactions is, in large measure, a consequence of the wide variety of organometallic donors that have been conscripted into service. The most common of these reagents are organic derivatives of tin, boron, and zinc, which each possess unique advantages and shortcomings. Because of their low cost, low toxicity, and high chemical stability, organosilanes have emerged as viable alternatives to the conventional reagents in recent years. However, unlike the tin- and zinc-based reactions, which require no activation, or the boron-based reactions, which require only heating with mild bases, silicon-based cross-coupling reactions often require heating in the presence of a fluoride source; this has significantly hampered the widespread acceptance of organosilanes. To address the "fluoride problem", we have introduced a new paradigm for palladium-catalyzed, silicon-based cross-coupling reactions that employs organosilanols, a previously underutilized class of silicon reagents. The use of organosilanols either in the presence of Brønsted bases or as their silanolate salts represents a simple and mild alternative to the classic fluoride-based activation method. Organosilanols are easily available by many well-established methods for introducing carbon-silicon bonds onto alkenes, alkynes, and arenes and heteroarenes. Moreover, we have developed four different protocols for the generation of alkali metal salts of vinyl-, alkenyl-, alkynyl-, aryl-, and heteroarylsilanolates: (1) reversible deprotonation with weak Brønsted bases, (2) irreversible deprotonation with strong Brønsted bases, (3) isolation of the salts from irreversible deprotonation, and (4) silanolate exchange with disiloxanes. We have demonstrated the advantages of each of these methods for a number of different coupling classes. The defining feature of this new process is the formation of a covalently linked palladium silanolate species that facilitates the critical transmetalation step. We have verified the intermediacy of a critical species that contains the key Si-O-Pd linkage by its identification as the resting state in reaction mixtures, by X-ray analysis, and by demonstrating its competence in thermal cross-coupling with no additives. Our conclusions contradict the long-standing dogma that silicon-based cross-coupling reactions require the generation of a pentacoordinate siliconate prior to transmetalation. This revelation has opened a new vista for discovery of reactions that involve this critical process.

Fluorous synthesis of allylic fluorides: C-F bond formation as the detagging process.

A novel fluorous tagging-detagging strategy has been developed featuring a fluorination as the detagging process; fluorous allylsilanes were prepared by cross-metathesis and subsequently subjected to electrophilic fluorodesilylation; Selectfluor was used as the detagging reagent; the resulting allylic fluorides were successfully purified by fluorous solid phase extraction.

Stereocontrolled synthesis of methyl silanediol peptide mimics.

The treatment of chiral sulfinimines with (methyldiphenylsilyl)lithium gives alpha-(methyldiphenylsilyl)sulfinamides with excellent diastereoselectivity, and in good yield. The presence of alpha-protons on the imines is also well tolerated. The sulfinamide auxiliary is easily removed via treatment with methanolic HCl and the resulting amine extended into peptide chains accordingly. The diphenylsilyl moiety is a resilient protecting group for the corresponding silanediol, which can be unmasked via treatment with TfOH, followed by aqueous hydrolysis. The crude silanediol may be isolated and purified as its corresponding bis-TMS siloxane via protection with TMSCl, and converted back to the desired silanediol via hydrolysis with aqueous KOH. Efforts to apply this approach to biologically relevant silanediol peptide mimics, with a view to protease inhibition, are described.

Phase separation of a mixed self-assembled monolayer prepared via a stepwise method.

Self-assembled monolayers (SAMs), a molecular-level assembly that forms spontaneously, provide a vehicle for investigating specific interactions at interfaces. This is particularly true for mixed SAMs that are composed of organosilanes with different chain lengths and/or chemical functionalities because they offer an adjustable surface for constructing 3D structures containing a variety of moieties. We recently observed that coadsorbed monolayers with different organosilanes on a Si wafer were separated into several tens or hundreds of nanometer domains that were rich in individual components. Several organosilanes, such as octadecyltrichlorosilane (OTS), octadecyltrimethoxysilane (OTMS), (3-mercaptopropyl)trimethoxysilane (MPTMS), and (3-aminopropryl)trimethoxysilane (APTMS), were used for regional separation. In this study, we propose a stepwise deposition method, namely, the deposition of a second siliane on a SAM substrate that creates intentional defects in the first silane. The surface morphologies were adjusted by the deposition sequence and immersion time of the silanes. As a result, a mixed SAM prepared by the proposed method showed effectively functionalized films compared to that prepared by the one-step method.

Preparation of enantiomerically pure (R)-(1-hydroxyethyl)dimethyl(phenyl)silane using resting cells of Saccharomyces cerevisiae (DHW-S-3) as biocatalyst.

The prochiral sila-ketone acetyldimethyl(phenyl)silane (1) was reduced enantioselectively into (R)-(1-hydroxyethyl)dimethyl(phenyl)silane [(R)-2] using resting cells of the commercially available yeast Saccharomyces cerevisiae (DHW S-3) as the biocatalyst. The bioconversion was performed on a 2.0-g scale in a 5-1 bioreactor. Starting with a substrate (1) concentration of 0.4 g.l-1, the highest production rate measured for this bioconversion was about 45-55 mumol (R)-2.l-1.min-1. After an incubation time of 1 h, all substrate in the medium had been converted, either biocatalytically reduced to (R)-2 or (probably chemically) converted into dimethyl(phenyl)silanol (Me2PhSiOH). After extraction of the cell-free medium with ethyl acetate/dichloromethane and subsequent purification of the extract by Kugelrohr distillation and chromatography on silica gel (medium-pressure liquid chromatography), 800 mg (yield 40%) of the bioconversion product (R)-2 was isolated. As shown by HPLC studies (cellulose triacetate as the chiral stationary phase) and 1H-nuclear magnetic resonance experiments (after derivatization of the bioconversion product with a chiral auxiliary agent), compound (R)-2 was almost enantiomerically pure (> 99% enantiomeric excess).