Identification of Volatiles in Tomato Fruit Using Headspace Solid-Phase-Micro-Extraction (HS-SPME) Coupled with Gas Chromatography-Mass Spectrometry (GC-MS).

Plant volatile organic compounds (VOCs) are organic chemicals that plants release as part of their natural biological processes. Various plant tissues produce VOCs, including leaves, stems, flowers, and roots. VOCs are essential in plant communication, defense against pests and pathogens, aroma and flavor, and attracting pollinators. The study of plant volatiles has become an increasingly important area of research in recent years, as scientists have recognized these compounds' important roles in plant physiology. As a result, there has been a growing interest in developing methods for collecting and analyzing plant VOCs. HS-SPME-GC-MS (headspace solid-phase microextraction-gas chromatography-mass spectrometry) is commonly used for plant volatile analysis due to its high sensitivity and selectivity. This chapter describes an efficient method for extracting and identifying volatile compounds by HS-SPME coupled with GC-MS in tomato fruits.

Simple, rapid, and cost-effective microextraction by the packed sorbent method for quantifying of urinary free catecholamines and metanephrines using liquid chromatography-tandem mass spectrometry and its application in clinical analysis.

Pheochromocytoma and paraganglioma (PPGL) are rare neuroendocrine tumors arising from adrenal and extra-adrenal chromaffin cells. They produce excessive amounts of catecholamines and their metabolites. A newly analytical procedure based on the semi-automated microextraction by packed sorbent (MEPS) technique, using a digitally controlled syringe (eVol) combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS), was developed to quantify free urinary catecholamines and metanephrines. The important parameters affecting MEPS performance, namely the type of sorbent material (porous graphitized carbon (PGC), polar enhanced polymer (PEP), cation-exchange (CX) and C18), number of extraction cycles, and elution solvent system, were evaluated. The optimal experimental conditions involved the loading of sample mixture in seven extraction cycles through a C18 sorbent in a MEPS syringe, followed by using elution solutions (water/acetonitrile/formic acid, 95/4.75/0.25). The entire sample preparation took about 4 min. Chromatographic separation was well achieved with an HSS PFP column using the gradient elution. The linearity range of the method was 0.167-33.4 ng/mL for epinephrine, 0.650-130 ng/mL for norepinephrine, 1.53-306 ng/mL for dopamine, 1.34-268 ng/mL for metanephrine, 3.43-686 ng/mL for normetanephrine, and 1.33-265 ng/mL for 3-methoxytyramine. The intra- and interassay precisions were ≤ 12.8%, and the respective accuracies were 88.4-112.0% and 89.0-109.5%. The carryover and sample stability without acidification were also investigated. Validation using clinical urine specimens showed that the proposed method had higher sensitivity compared with other urinary biochemical tests. The developed MEPS-LC-MS/MS method was simple, fast, and cost-effective; it helped to obtain information about multiple metabolites. It is applicable in routine clinical laboratories for the screening of PPGL. Graphical abstract.

Fast and efficient analyses of the post-mortem human blood and bone marrow using DI-SPME/LC-TOFMS method for forensic medicine purposes.

For the first time the method DI-SPME/LC-TOFMS was used and developed in order to determine the large antidepressant drugs in real forensic cases. The aim of the study was to optimize the new DI-SPME/LC-TOFMS method for the quantification of the large group of psychotropic drugs such as benzodiazepines, selective serotonin reuptake inhibitors, selective serotonin and noradrenaline reuptake inhibitors, tricyclic antidepressants and sleeping pills "Z". The volume of the sample, adsorption time, post-adsorption purification and desorption time were precisely optimized. The validation parameters such as limit of detection and quantification, linearity, precision during and between days and the matrix effect were determined. All obtained values are within the acceptable range for toxicological analyses. The usefulness of the method was confirmed by analyzing the post-mortem samples. Drug concentrations were determined in real samples with high precision, which gives perspectives for the DI-SPME/LC-TOFMS routine application in toxicological and forensic analyses in the future.

Rapid quantification of acetaminophen in plasma using solid-phase microextraction coupled with thermal desorption electrospray ionization mass spectrometry.

RATIONALE: Solid-phase microextraction coupled with thermal desorption electrospray ionization tandem mass spectrometry (SPME-TD-ESI-MS/MS) is proposed as a novel method for the rapid quantification of acetaminophen in plasma samples from a pharmacokinetics (PK) study. METHODS: Traces of acetaminophen were concentrated on commercial fused-silica fibers coated with a polar polyacrylate (PA) polymer using direct immersion SPME. No agitation, heating, addition of salt, or adjustment of the pH of the sample solution was applied during the extraction. Any acetaminophen absorbed on the SPME fibers was subsequently desorbed and detected by TD-ESI-MS/MS. RESULTS: Parameters of the absorption, sensitivity, reproducibility, and linearity for the SPME-TD-ESI-MS/MS method were evaluated. The time required to complete a TD-ESI-MS/MS analysis was less than 30 seconds. Matrix-matching calibration was performed to calculate the concentration of acetaminophen in the sample. A linear calibration curve with a concentration range of 100-10,000 ng/mL was constructed to calculate the quantity of acetaminophen. The SPME-TD-ESI-MS quantification results for acetaminophen in plasma were in good agreement with those obtained by the conventional LC/MS/MS method. CONCLUSIONS: With the proposed method, a 10-min SPME time was enough to achieve the lower limit of quantitation (i.e. 100 ng/mL) and for a complete PK profiling of acetaminophen. A shorter extraction time could be achieved by applying agitation, heating, adding salt, or adjusting the pH of the sample solution to enhance analyte absorption efficiency. The time required to detect acetaminophen on the SPME fiber was less than 30 s, allowing the rapid quantification of acetaminophen in plasma with good accuracy.

Development and performance evaluation of a novel dynamic headspace vacuum transfer "In Trap" extraction method for volatile compounds and comparison with headspace solid-phase microextraction and headspace in-tube extraction.

Headspace in-tube extraction (HS-ITEX) and solid phase microextraction (HS-SPME) sampling, followed by gas chromatography-mass spectrometry (GC-MS), are widely used to analyze volatile compounds in various food matrices. While the extraction efficiency of volatile compounds from foodstuffs is crucial for obtaining relevant results, these efficiency of these extraction methods limited by their long extraction times and requirements for large sample quantity. This study reports on the development and application of a new extraction technique based on HS-ITEX hardware, which improves the extraction rate and capacity by operating under reduced pressure, called Dynamic Headspace Vacuum Transfer In-Trap Extraction (DHS-VTT). The results of the study indicate that DHS-VTT improves the extraction of the target compounds. The area of the mass spectrometer signal for each compound can be up to 450 times more intense than the HS-SPME and HS-ITEX techniques performed in the same experimental conditions of extraction temperature and time. DHS-VTT runs in automated mode, making it possible to work with smaller sample quantity and also favors the HS extraction of all volatile compounds. In addition, the necessary modifications to the installation were cheap and the life of an ITEX trap is up to 10 times longer than an SPME fibre.

A Technique for Thermal Desorption Analyses Suitable for Thermally-Labile, Volatile Compounds.

Many plant and insect interactions are governed by odors released by the plants or insects and there exists a continual need for new or improved methods to collect and identify these odors. Our group has for some time studied below-ground, plant-produced volatile signals affecting nematode and insect behavior. The research requires repeated sampling of volatiles of intact plant/soil systems in the laboratory as well as the field with the help of probes to minimize unwanted effects on the systems we are studying. After evaluating solid adsorbent filters with solvent extraction or solid phase micro extraction fiber sample collection, we found dynamic sampling of small air volumes on Tenax TA filters followed by thermal desorption sample introduction to be the most suitable analytical technique for our applications. Here we present the development and evaluation of a low-cost and relatively simple thermal desorption technique where a cold trap cooled with liquid carbon dioxide is added as an integral part of a splitless injector. Temperature gradient-based focusing and low thermal mass minimizes aerosol formation and eliminates the need for flash heating, resulting in low sample degradation comparable to solvent-based on-column injections. Additionally, since the presence of the cold trap does not affect normal splitless injections, on-the-fly switching between splitless and thermal desorption modes can be used for external standard quantification.

A comparison study on a sulfonated graphene-polyaniline nanocomposite coated fiber for analysis of nicotine in solid samples through the traditional and vacuum-assisted HS-SPME.

A simple, rapid, and reliable headspace solid-phase microextraction (HS-SPME) procedure, reinforced by applying vacuum in the extraction vial, was developed. It was applied for the extraction of nicotine in solid samples prior to determination by gas chromatography-flame ionization detection (GC-FID). First, the surface of a narrow stainless steel wire was made porous and adhesive by platinization to obtain a durable, higher surface area, and resistant fiber. Then, a thin film of sulfonated graphene/polyaniline (Sulf-G/PANI) nanocomposite was synthesized and simultaneously coated on the platinized fiber using the electrophoretic deposition (EPD) method. It was demonstrated that the extraction efficiency remarkably increased by applying the reduced-pressure condition in the extraction vial. To evaluate the conventional HS-SPME and vacuum-assisted HS-SPME (VA-HS-SPME) platforms, all experimental parameters affecting the extraction efficiency including desorption time and temperature, extraction time and temperature and moisture content of sample matrix were optimized. The highest extraction efficiency was obtained at 60°C, 10min (extraction temperature and time) and 280°C, 2min (desorption condition), for VA-HS-SPME strategy, while for conventional HS-SPME the extraction and desorption conditions found to be 100°C, 30min and 280°C, 2min, respectively. The Sulf-G/PANI coated fiber showed high thermal stability, good chemical/mechanical resistance, and long lifetime. For analysis of nicotine in solid samples using VA-HS-SPME-GC-FID, linear dynamic range (LDR) was 0.01-30µgg-1 (R2=0.996), the relative standard deviation (RSD%, n=6), for analyses of 1µgg-1 nicotine was calculated 3.4% and limit of detection (LOD) found to be 0.002µgg-1. The VA-HS-SPME-GC-FID strategy was successfully carried out for quantitation of nicotine in hair and tobacco real samples.

Rapid in vivo determination of fluoroquinolones in cultured puffer fish (Takifugu obscurus) muscle by solid-phase microextraction coupled with liquid chromatography-tandem mass spectrometry.

Fluoroquinolones (FQs) are a group of antimicrobial agents that have been widely used for therapeutic purposes in clinical medicine for human and veterinary diseases, as well as in aquaculture production. Their residues, however, may survive in foods of animal origin, thus causing health risks for human. In this study, a rapid and sensitive method based on in vivo solid-phase microextraction (SPME) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed to detect the residues of five FQs in cultured puffer fish (Takifugu obscurus). In vitro fiber evaluation experiment demonstrated that, compared with the thicker polydimethylsiloxane (PDMS) coating (165µm), the custom-made biocompatible C18-PAN fibers (45µm) exhibited much higher extraction efficiencies towards FQs (approximately 9-31 times). The custom-made C18-PAN coating also possessed excellent reproducibility in fish muscle with the intra-fiber relative standard deviations (RSDs) ranging from 11.2% to 14.3% (n = 6) and inter-fiber RSDs ranging from 13.1% to 16.1% (n = 6), which was suitable for in vivo sampling. The custom-made SPME fibers were subsequently applied to determine fluoroquinolones in dorsal-epaxial muscle of living puffer fish. The accuracies were verified through the comparison with traditional liquid extraction (LE) method, and the sensitivities were demonstrated to be satisfying with the limits of detection (LODs) ranging from 0.3ngg-1 to 1.5ngg-1. In general, this study presented a convenient and high-efficient method to determine fluoroquinolones in puffer fish by in vivo sampling.

A rapid MCM-41 dispersive micro-solid phase extraction coupled with LC/MS/MS for quantification of ketoconazole and voriconazole in biological fluids.

A rapid dispersive micro-solid phase extraction (D-µ-SPE) combined with LC/MS/MS method was developed and validated for the determination of ketoconazole and voriconazole in human urine and plasma samples. Synthesized mesoporous silica MCM-41 was used as sorbent in d-µ-SPE of the azole compounds from biological fluids. Important D-µ-SPE parameters, namely type desorption solvent, extraction time, sample pH, salt addition, desorption time, amount of sorbent and sample volume were optimized. Liquid chromatographic separations were carried out on a Zorbax SB-C18 column (2.1 × 100 mm, 3.5 µm), using a mobile phase of acetonitrile-0.05% formic acid in 5 mm ammonium acetate buffer (70:30, v/v). A triple quadrupole mass spectrometer with positive ionization mode was used for the determination of target analytes. Under the optimized conditions, the calibration curves showed good linearity in the range of 0.1-10,000 µg/L with satisfactory limit of detection (≤0.06 µg/L) and limit of quantitation (≤0.3 µg/L). The proposed method also showed acceptable intra- and inter-day precisions for ketoconazole and voriconazole from urine and human plasma with RSD ≤16.5% and good relative recoveries in the range 84.3-114.8%. The MCM-41-D-µ-SPE method proved to be rapid and simple and requires a small volume of organic solvent (200 µL); thus it is advantageous for routine drug analysis.

Determination of urinary levels of leukotriene B(4) using ad highly specific and sensitive methodology based on automatic MEPS combined with UHPLC-PDA analysis.

Leukotriene B4 (LTB4) is a potent mediator of inflammation and plays a key function in the pathophysiology of chronic asthma. Detectable urinary levels of LTB4, arises from the activation of leukotriene pathways. In this study an ultra-fast, selective and sensitive analytical method based on semi-automatic microextraction by packed sorbents (MEPS) technique, using a new digitally controlled syringe (eVol®) combined with ultra-high pressure liquid chromatography (UHPLC), is proposed for the measurement of urinary LTB4 (U-LTB4) levels in a group of asthmatic patients (APs) and healthy controls (CTRL). Important parameters affecting MEPS performance, namely sorbent type, number of extraction cycles (extract-discard) and elution volume, were evaluated. The optimal experimental conditions among those investigated for the quantification of U-LTB4 in urine samples were as follows: porous graphitic carbon sorbent (PGC), 10 extractions cycle (10×250 µL of sample) and LTB4 elution with 100 µL of acetonitrile. The UHPLC optimum conditions resulted in a mobile phase consisting of 95% (v/v) of acid aqueous solution (v/v), and acetonitrile 5% (v/v); flow rate of 500 µL/min, and a column temperature of 37±0.1 °C. Under optimized conditions the proposed method exhibit good selectivity and sensitivity LOD (0.37 ng/mL) and LOQ (1.22 ng/mL). The recovery ranging from 86.4 to 101.1% for LTB4, with relative standard deviations (% RSD) no larger than 5%. In addition, the method also afforded good results in terms of linearity (r(2)>0.995) within the established concentration range, with a residual deviation for each calibration point below 6%, and intra- and inter-day repeatability in urine samples with RSD values lower than 4 and 5%, respectively. The application of the method to urine samples revealed a tendency towards the increased urinary LTB4 levels in APs (5.42±0.17 ng/mL) when compared to those of CTRL group (from ND to 1.9 ng/mL). Urinary measurement of LTB4 may be an interesting and non-invasive option to assess control of asthma.

In-line coupling of microextractions across polymer inclusion membranes to capillary zone electrophoresis for rapid determination of formate in blood samples.

Polymer inclusion membranes (PIMs) have several important features, i.e., PIMs are dry and non-porous membranes, which can be prepared ahead of use and stored without noticeable deterioration in extraction performance. In this contribution, in-line coupling of microextractions across PIMs to a separation method for clinical purposes was demonstrated for the first time. Formate (the major metabolite in methanol poisoning) was determined in undiluted human serum and whole blood by capillary zone electrophoresis (CZE) with simultaneous capacitively coupled contactless conductivity detection (C(4)D) and UV-Vis detection. A purpose-made microextraction device with PIM was coupled to a commercial CZE instrument in order to ensure complete automation of the entire analytical procedure, i.e., of formate extraction, injection, CZE separation and quantification. PIMs for formate extractions consisted of 60% (w/w) cellulose triacetate as base polymer and 40% (w/w) Aliquat™ 336 as anion carrier. The method was characterized by good repeatability of peak areas (≤7.0%) and migration times (≤0.8%) and by good linearity of calibration curves (r(2) = 0.993-0.999). Limits of detection in various matrices ranged from 15 to 54 µM for C(4)D and from 200 to 635 µM for UV-Vis detection and were sufficiently low to clearly distinguish between endogenous and toxic levels of formate in healthy and methanol intoxicated individuals. In addition, PIMs proved that they may act as phase interfaces with excellent long-term stability since once prepared, they retained their extractions properties for, at least, two months of storage.

A cost-effective method for estimating di(2-ethylhexyl)phthalate in coastal sediments.

This study describes the development of a new method for the analysis of di(2-ethylhexyl)phthalate (DEHP) using 0.1-0.3 g of sediment sample, based on matrix solid phase dispersion (MSPD) using C18 as dispersant phase (0.4 g) and acetonitrile-water as eluting solvent (3.4 mL 1:3.25, v/v). No evaporation step is required. 3 mL of extracts were processed on-line by in-tube solid phase microextraction (IT-SPME) coupled to capillary liquid chromatography (CapLC) and diode array detector (DAD). A short analytical column Zorbax SB C18 (35×0.5 mm, 5 µm) provided suitable results. FTIR-ATR was employed for characterizing sediment samples and MSPD procedure. The total analysis time was less than 20 min (MSPD takes about 10 min). The utility of the described approach has been tested by analyzing several real samples. No matrix effect was found. Achieved precision was less than 10% for DEHP estimation. Detection limits in samples were 270 and 90 µg/kg for 0.1 and 0.3 g of taken sediment, respectively.

A semi-automatic microextraction in packed sorbent, using a digitally controlled syringe, combined with ultra-high pressure liquid chromatography as a new and ultra-fast approach for the determination of prenylflavonoids in beers.

In this work a highly selective and sensitive analytical procedure based on semi-automatic microextraction by packed sorbents (MEPS) technique, using a new digitally controlled syringe (eVol(®)) combined with ultra-high pressure liquid chromatography (UHPLC), is proposed to determine the prenylated chalcone derived from the hop (Humulus lupulus L.), xanthohumol (XN), and its isomeric flavonone isoxanthohumol (IXN) in beers. Extraction and UHPLC parameters were accurately optimized to achieve the highest recoveries and to enhance the analytical characteristics of the method. Important parameters affecting MEPS performance, namely the type of sorbent material (C2, C8, C18, SIL, and M1), elution solvent system, number of extraction cycles (extract-discard), sample volume, elution volume, and sample pH, were evaluated. The optimal experimental conditions involves the loading of 500µL of sample through a C18 sorbent in a MEPS syringe placed in the semi-automatic eVol(®) syringe followed by elution using 250µL of acetonitrile (ACN) in a 10 extractions cycle (about 5min for the entire sample preparation step). The obtained extract is directly analyzed in the UHPLC system using a binary mobile phase composed of aqueous 0.1% formic acid (eluent A) and ACN (eluent B) in the gradient elution mode (10min total analysis). Under optimized conditions good results were obtained in terms of linearity within the established concentration range with correlation coefficients (R) values higher than 0.986, with a residual deviation for each calibration point below 12%. The limit of detection (LOD) and limit of quantification (LOQ) obtained were 0.4ngmL(-1) and 1.0ngmL(-1) for IXN, and 0.9ngmL(-1) and 3.0ngmL(-1) for XN, respectively. Precision was lower than 4.6% for IXN and 8.4% for XN. Typical recoveries ranged between 67.1% and 99.3% for IXN and between 74.2% and 99.9% for XN, with relative standard deviations %RSD no larger than 8%. The applicability of the proposed analytical procedure in commercial beers, revealed the presence of both target prenylchalcones in all samples being IXN the most abundant with concentration of between 0.126 and 0.200µgmL(-1).

A reliable and simple method for the assay of neuroendocrine tumor markers in human urine by solid-phase microextraction-gas chromatography-triple quadrupole mass spectrometry.

Homovanillic acid (HVA), vanylmandelic acid (VMA), and 5-hydroxyindoleacetic acid (5-HIAA) are the metabolites of some catecholamines such as epinephrine, nor-epinephrine, dopamine and serotonin and their quantification is used in the diagnosis and management of patients with neurocrine tumors. A novel approach in the assay of these biomarkers in human urine samples by solid phase microextraction (SPME) combined with gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS) is presented. A preliminary derivatization with ethyl chloroformate/ethanol was used and the corresponding derivatives were then extracted by SPME in immersion mode. The performance of five SPME fibers and three chloroformates were evaluated in univariate mode and the best results were obtained using the polyacrylate fiber and ethyl chloroformate. The variables affecting the efficiency of SPME analysis were optimized by the multivariate approach of "Experimental design" and, in particular, a central composite design (CCD) was applied. The optimum working conditions in terms of response values were achieved by performing analysis at room temperature with addition of NaCl (9.5%) and with an extraction time of 25.8 min. Identification and quantification of analytes were carried out by using a gas chromatography-triple quadrupole mass spectrometry (GC-QqQ MS) system in multiple reaction monitoring (MRM) acquisition. An evaluation of all analytical parameters shows that the proposed method provides satisfactory results. Very good linearities were, in fact, achieved in the tested calibration ranges with correlation coefficient values >0.99 for all the analytes and accuracies and RSDs calculated for between-run and tested at concentrations of 1, 10, and 80 mg L(-1) were ranging from 91.3% to 106.6%, and from 0.5 to 8.9%, respectively. Moreover, the LOD values obtained can be considered very satisfactory (1.3, 0.046 and 24.3 µg L(-1) for HVA, VMA and 5-HIAA, respectively). The developed protocol represents, therefore, a simple, rapid and selective tool for assaying these acidic biomarkers in urine samples for neuroendocrine cancer diagnosis.

Application of ethyl chloroformate derivatization for solid-phase microextraction-gas chromatography-mass spectrometric determination of bisphenol-A in water and milk samples.

A simple and rapid analytical method based on in-matrix ethyl chloroformate (ECF) derivatization has been developed for the quantitative determination of bisphenol-A (BPA) in milk and water samples. The samples containing BPA were derivatised with ECF in the presence of pyridine for 20 s at room temperature, and the non-polar derivative thus formed was extracted using polydimethylsiloxane solid-phase microextraction (SPME) fibres with thicknesses of 100 µm followed by analysis using gas chromatography-mass spectrometry. Three alkyl chloroformates (methyl, ethyl and isobutyl chloroformate) were tested for optimum derivatisation yields, and ECF has been found to be optimum for the derivatisation of BPA. Several parameters such as amount of ECF, pyridine and reaction time as well as SPME parameters were studied and optimised in the present work. The limit of detection for BPA in milk and water samples was found to be 0.1 and 0.01 µg L(-1), respectively, with a signal-to-noise ratio of 3:1. The limit of quantitation for BPA in milk and water was found to be 0.38 and 0.052 µg L(-1), respectively, with a signal-to-noise ratio of 10:1. In conclusion, the method developed was found to be rapid, reliable and cost-effective in comparison to silylation and highly suitable for the routine analysis of BPA by various food and environmental laboratories.

Anodized aluminum wire as a solid-phase microextraction fiber for rapid determination of volatile constituents in medicinal plant.

Headspace solid phase microextraction using anodized aluminum fiber in combination with capillary GC-MS was utilized as monitoring technique for the collection and detection of the volatile compounds of Echinophora platyloba DC. Experimental parameters, including the sample weight, extraction temperature, extraction time and humidity effect, desorption time and desorption temperature were examined and optimized. Using HS-SPME followed by GC-MS, 53 compounds were separated and identified in E. platyloba DC, which mainly included E-ß ocimene (47.63%), R-D-decalactone (13.28%), α-pinene (7.43%) and nonane (6.71%). Compared with hydrodistillation (HD), HS-SPME, provides the advantages of a small amount of sample, timesaving, simplicity and cheapness. To the best of our knowledge, this is the first report on using anodized aluminum fiber in solid-phase microextraction coupled to headspace for the investigation of volatile fraction of medicinal plant.

A new method for the determination of short-chain fatty acids from the aliphatic series in wines by headspace solid-phase microextraction-gas chromatography-ion trap mass spectrometry.

A new analytical method for the determination of nine short-chain fatty acids (acetic, propionic, isobutyric, butyric, isovaleric, 2-methylbutyric, hexanoic, octanoic and decanoic acids) in wines using the automated HS/SPME-GC-ITMS technique was developed and optimised. Five different SPME fibers were tested and the influence of different factors such as temperature and time of extraction, temperature and time of desorption, pH, strength ionic, tannins, anthocyans, SO(2), sugar and ethanol content were studied and optimised using model solutions. Some analytes showed matrix effect so a study of recoveries was performed. The proposed HS/SPME-GC-ITMS method, that covers the concentration range of the different analytes in wines, showed wide linear ranges, values of repeatability and reproducibility lower than 4.0% of RSD and detection limits between 3 and 257 µgL(-1), lower than the olfactory thresholds. The optimised method is a suitable technique for the quantitative analysis of short-chain fatty acids from the aliphatic series in real samples of white, rose and red wines.

Ultra-sensitive determination of cadmium in rice and water by UV-vis spectrophotometry after single drop microextraction.

In this work, a new method based on single drop microextraction (SDME) preconcentration using tetrachloromethane (CCl(4)) as extraction solvent was proposed for the spectrophotometric determination of cadmium in rice and water samples. The influence factors relevant to SDME, such as type and volume of extractant, stirring rate and time, dithizone concentration, pH, drop volume and instrumental conditions were studied systematically. Under the optimal conditions, the limit of detection (LOD) was 0.5 ng L(-1), with sensitivity enhancement factor (EF) of 128. The different maximum absorption wavelength caused by the different extraction acidity compared with some conventional works and the enhancement effect of acetone (dilution solvent) for the spectrophotometric determination were the two key factors of the high EF and sensitivity. The proposed method was applied to the determination of rice and water samples with satisfactory analytical results. The proposed method was simple, rapid, cost-efficient and sensitive.

Sarcosine as a marker in prostate cancer progression: a rapid and simple method for its quantification in human urine by solid-phase microextraction-gas chromatography-triple quadrupole mass spectrometry.

Sarcosine is an amino acid derivative of N-methylglycine and is involved in the amino acid metabolism and methylation processes that are enriched during prostate cancer progression. It could also serve as a new target to be measured during therapeutic interventions and help in the identification of aggressive tumors for radical treatment. In this study, we present a new urine test that can help early diagnosis of prostate cancer. The method for the quantification of sarcosine in urine consists of a solid-phase microextraction (SPME) step followed by gas chromatography-triple quadrupole mass spectrometry analysis. We used a preliminary derivatization step with ethyl chloroformate/ethanol and the corresponding ester was then extracted by SPME in immersion mode. Several fibers were evaluated and the optimization of the parameters affecting the SPME process was carried out using an experimental design. The optimal values were 20 min extraction time, 10% NaCl, and 270°C using a divinylbenzene/Carboxen/polydimethylsiloxane fiber. The triple quadrupole analyzer acquired data in selected reaction monitoring mode, allowing us to obtain reconstructed chromatograms with well-defined chromatographic peaks. The accuracy and precision of this method were evaluated at concentrations of 70, 250, and 800 ng/ml and were found to be acceptable. Very satisfactory values (0.10 and 0.16 ng/ml, respectively) were also achieved for the limit of detection and the limit of quantification. The proposed protocol represents a rapid, simple, selective, and sensitive tool to quantify sarcosine in urine samples for prostate cancer diagnosis and for a screening test.

Kinetically-calibrated solid-phase microextraction using label-free standards and its application for pharmaceutical analysis.

Pre-equilibrium solid-phase microextraction (PE-SPME) has attracted considerable research attention due to shorter sampling times and better temporal resolution than afforded by equilibrium SPME (E-SPME). However, the calibration of PE-SPME is often time-consuming and requires deuterated calibrants, which if available, are often expensive. To address these challenges, we propose a simple but versatile kinetic calibration method, in which nonisotopic (label-free) compounds of interest can supplant the use of deuterated analogues, and the need to determine partitioning coefficients inherent to earlier procedures has been eliminated. Using this approach, both free and total concentrations of analytes can be simultaneously measured within complex sample systems with high accuracy and precision. This calibration method was validated against established E-SPME and solid-phase extraction techniques through the measurement of selected pharmaceuticals in progressively complex matrixes including inorganic buffers, fish blood, and municipal wastewater effluents. This calibration approach may significantly improve time and cost-effectiveness, while improving the application of the SPME approach within highly dynamic systems.