Efficient pullulan production by Aureobasidium pullulans using cost-effective substrates.

In this study, cost-effective substrates such as cassava starch, corn steep liquor (CSL) and soybean meal hydrolysate (SMH) were used for pullulan production by Aureobasidium pullulans CCTCC M 2012259. The medium was optimized using response surface methodology (RSM) and artificial neural network (ANN) approaches, and analysis of variance indicated that the ANN model achieved higher prediction accuracy. The optimal medium predicted by ANN was used to produce high molecular weight pullulan in high yield. SMH substrates increased both biomass and pullulan titer, while CSL substrates maintained higher pullulan molecular weight. Results of kinetic parameters, key enzyme activities and intracellular uridine diphosphate glucose contents revealed the physiological mechanism of changes in pullulan titer and molecular weight using different substrates. Economic analysis of batch pullulan production using different substrates was performed, and the cost of nutrimental materials for CSL and SMH substrates was decreased by 46.1% and 49.9%, respectively, compared to the control using glucose and yeast extract as substrates, which could improve the competitiveness of pullulan against other polysaccharides in industrial applications.

Production of raw starch-degrading enzyme by Aspergillus sp. and its use in conversion of inedible wild cassava flour to bioethanol.

The major bottlenecks in achieving competitive bioethanol fuel are the high cost of feedstock, energy and enzymes employed in pretreatment prior to fermentation. Lignocellulosic biomass has been proposed as an alternative feedstock, but because of its complexity, economic viability is yet to be realized. Therefore, research around non-conventional feedstocks and deployment of bioconversion approaches that downsize the cost of energy and enzymes is justified. In this study, a non-conventional feedstock, inedible wild cassava was used for bioethanol production. Bioconversion of raw starch from the wild cassava to bioethanol at low temperature was investigated using both a co-culture of Aspergillus sp. and Saccharomyces cerevisiae, and a monoculture of the later with enzyme preparation from the former. A newly isolated strain of Aspergillus sp. MZA-3 produced raw starch-degrading enzyme which displayed highest activity of 3.3 U/mL towards raw starch from wild cassava at 50°C, pH 5.5. A co-culture of MZA-3 and S. cerevisiae; and a monoculture of S. cerevisiae and MZA-3 enzyme (both supplemented with glucoamylase) resulted into bioethanol yield (percentage of the theoretical yield) of 91 and 95 at efficiency (percentage) of 84 and 96, respectively. Direct bioconversion of raw starch to bioethanol was achieved at 30°C through the co-culture approach. This could be attractive since it may significantly downsize energy expenses.

Probiotic characterization of potential hydrolases producing Lactococcus lactis subsp. lactis isolated from pickled yam.

The aim of this study was to characterize potential probiotic strain co-producing α-amylase and ß-galactosidase. Sixty-three strains, isolated from pickle samples were screened for their hydrolase producing capacity by utilizing different starches as carbon source. One out of 63 strains, isolated from traditionally fermented pickled yam showing maximum hydrolase activity (α-amylase (36.9 U/ml) and ß-galactosidase (42.6 U/ml)) within a period of 48 hours was identified as Lactococcus lactis subsp. lactis. Further, it was assessed for the probiotic characteristics under gastrointestinal conditions like acidic, alkaline, proteolytic enzymes, bile stress and found to exhibit tolerance to these stresses. The therapeutic potential of the isolate is implicated because of its antagonistic effect against enteric foodborne pathogens (Salmonella typhimurium, Escherichia coli 0157:H7, Staphylococcus aureus, Yersinia enterocolitica and Aeromonas hydrophila). The results of this study entail a potential applicability of the isolate in developing future probiotic foods besides the production of industrially significant hydrolases.

Gluten contamination of naturally gluten-free flours and starches used by Canadians with celiac disease.

A large national investigation into the extent of gluten cross-contamination of naturally gluten-free ingredients (flours and starches) sold in Canada was performed. Samples (n = 640) were purchased from eight Canadian cities and via the internet during the period 2010-2012 and analysed for gluten contamination. The results showed that 61 of the 640 (9.5%) samples were contaminated above the Codex-recommended maximum level for gluten-free products (20 mg kg⁻¹) with a range of 5-7995 mg kg⁻¹. For the ingredients that were labelled gluten-free the contamination range (5-141 mg kg⁻¹) and number of samples were lower (3 of 268). This picture was consistent over time, with approximately the same percentage of samples above 20 mg kg⁻¹ in both the initial set and the subsequent lot. Looking at the total mean (composite) contamination for specific ingredients the largest and most consistent contaminations come from higher fibre ingredients such as soy (902 mg kg⁻¹), millet (272 mg kg⁻¹) and buckwheat (153 mg kg⁻¹). Of the naturally gluten-free flours and starches tested that do not contain a gluten-free label, the higher fibre ingredients would constitute the greatest probability of being contaminated with gluten above 20 mg kg⁻¹.

Cationized starch-based material as a new ion-exchanger adsorbent for the removal of C.I. Acid Blue 25 from aqueous solutions.

This article describes the use of a cationized starch-based material as new ion-exchanger adsorbent for the removal of C.I. Acid Blue 25 (AB 25) from aqueous solutions. Batch adsorption studies concerning the effects of contact time, pH and temperature are presented and discussed. Adsorption experimental data showed that: (i) the process was uniform and rapid: adsorption of dye reached equilibrium in 50 min in the wide pH range of dye solutions; (ii) adsorption kinetics followed the pseudo-second order model; (iii) the Langmuir model yielded a much better fit than the Freundlich model for the dye concentration range under study; (iv) this adsorbent exhibited interesting adsorption capacities: on the basis of the Langmuir analysis, the maximum adsorption capacity was determined to be 322 mg of dye per gram of material at 25 degrees C; (v) the adsorption capacity decreased with increasing temperature; and (vi) the negative value of free energy change indicated the spontaneous nature of adsorption.

[A medical and economic study about use of hemostatic glues in cardiac surgery]. / Etude médicoéconomique en chirurgie cardiaque : application aux colles hémostatiques.

INTRODUCTION: The impact of the use of biological and synthetic glues in cardiac surgery was assessed by an economic and medical study. MATERIAL AND METHODS: The observational prospective study had duration of three months. All the patients undergoing cardiac surgery were included in the study. The end points were medical (blood transfusion) and economic (duration and cost of the stay in hospital). There were 2 groups: treated or not by glues. STATISTICAL ANALYSIS: T Student tests. RESULTS: Among 154 patients, the 2 principal indications were valvular replacement (48%) and coronary artery bypass grafting (37%). Fifty seven (37%) patients received a glue. The number of transfused globular units and the duration of the stay in the intensive care unit were significantly higher (p<0.05) by treated patients. CONCLUSION: Not only the use of glues did not decrease the post-operative bleedings but it increased also the cost of the stay in hospital. Guidelines were validated by the hospital Commission on drugs.

Element concentrations of dry-grind corn-processing streams.

The dry-grind corn process is one of two technologies used to convert corn into ethanol. In this process, all kernel components are processed through several sequential steps, including fermentation. Only one coproduct (distillers' dried grains with solubles [DDGS]) is available for marketing. DDGS provide income to offset costs of processing; issues that affect marketing have implications in the economic viability of dry-grind plants. Two issues relate to elements in DDGS: high concentrations and excessive variation. Data on element concentrations in dry-grind processing streams could be helpful in addressing these concerns. The objective of this study was to determine element concentrations in primary process streams from dry-grind plants. Samples of corn, ground corn, beer, wet grains, syrup, and DDGS were obtained from nine dry-grind plants, and element concentrations were determined. The concentrations of most elements in corn were not different among processing plants and were similar to published data. However, for the processing streams, there were differences in several element concentrations among processing plants. The concentrations of most elements in beer were about three times those of corn, due to the disappearance of starch during fermentation. Syrup had the highest element concentrations. Variations in element contents of DDGS and parent streams were due to processing conditions and not corn. Appropriate processing of thin stillage (the parent stream of syrup) could reduce the element content of DDGS.

Carbohydrates--the renewable raw materials of high biotechnological value.

Carbohydrates are the potential biomolecules derived from nature. Their molecular diversity has led to a bewildering variety of species, structures and characteristics all performing a large array of functions of great significance. Biologically they are vital as message (immunological) carriers, physiologically they are useful as energy (nutritional) reserves, and technologically they are needed for altering the texture and consistency (functional) of foods. Recent advances in glycobiology have opened up a new understanding of the role of sugars in biology and medicine. Noncellulosic beta-(1-3)-linked D-glucans, a group of polysaccharides found as constituents of fungi, algae, and higher plants, exhibit many interesting properties, depending on their molecular conformation. They are excellent 'biological response modifiers' and show significant immunomodulatory activities. They elicit a variety of host defense biological responses, for example, potent antitumor activity. On the other hand, the mixed-linkage ((1-3/1-4)-beta-linked) glucans are important constituents of cereal cell walls, where they perform properties of physiological importance, such as water holding capacity, porosity, and plasticity, which are useful at different stages of growth/development of plants. Of late, carbohydrate-based therapeutics are becoming the promise against many chronic diseases of today and tomorrow. Some of the characteristic features, structural attributes, functional significance, and applications of a selected few carbohydrate species are the subject matter of this review.