Designing of a new transdermal antibiotic delivery polymeric membrane modified by functionalized SBA-15 mesoporous filler.

A new drug delivery system using an asymmetric polyethersulfone (PES) membrane modified by SBA-15 and glutamine-modified SBA-15 (SBA-Q) was prepared in this study by the aim of azithromycin delivery enhancement in both in vitro and ex vivo experiments. The research focused on optimizing membrane performance by adjusting critical parameters including drug concentration, membrane thickness, modifier percentage, polymer percentage, and pore maker percentage. To characterize the fabricated membranes, various techniques were employed, including scanning electron microscopy, water contact angle, and tensile strength assessments. Following optimization, membrane composition of 17% PES, 2% polyvinylpyrrolidone, 1% SBA-15, and 0.5% SBA-Q emerged as the most effective. The optimized membranes demonstrated a substantial increase in drug release (906 mg/L) compared to the unmodified membrane (440 mg/L). The unique membrane structure, with a dense top layer facilitating sustained drug release and a porous sub-layer acting as a drug reservoir, contributed to this improvement. Biocompatibility assessments, antibacterial activity analysis, blood compatibility tests, and post-diffusion tissue integrity evaluations confirmed the promising biocompatibility of the optimized membranes. Moreover, long-term performance evaluations involving ten repeated usages underscored the reusability of the optimized membrane, highlighting its potential for sustained and reliable drug delivery applications.

Development of microfiltration membranes based on polysulfone and polyetherimide blends.

In this study, membranes blended with polysulfone (PSU) and polyetherimide (PEI) polymers in different ratios were fabricated. Their potential to remove pollutants from rivers, which are a potential drinking water source, was investigated. Scanning electron microscopy analysis revealed that the PSU membranes had a dense and homogeneous layer, whereas the addition of PEI formed a spongy substrate. The water content of the fabricated membranes varied between 5.37 and 22.42%, porosities 28.73-89.36%, contact angles 69.18-85.81%, and average pure water fluxes 257.25-375.32 L/m2 h. The blended membranes removed turbidity, chloride, alkalinity, conductivity, sulfate, iron, manganese, and total organic carbon up to 98.32, 92.28, 96.87, 90.67, 99.58, 94.63, 97.48, and 79.11%, respectively. These results show that when PEI was added to the PSU polymer, the filtration efficiency increased owing to an increase in the hydrophilicity of the membranes. Blending these two polymers enabled the optimization of membrane properties such as permeability, selectivity, and mechanical strength. In addition, membrane fabrication processes are simple and incur low costs.

Bisphenol A and its structural analogues exhibit differential potential to induce mitochondrial dysfunction and apoptosis in human granulosa cells.

Bisphenol A (BPA) is an endocrine disruptor strongly associated with ovarian dysfunction. BPA is being substituted by structurally similar chemicals, such as bisphenol S (BPS), bisphenol F (BPF), and bisphenol AF (BPAF). However, the toxicity of these analogues in female reproduction remains largely unknown. This study evaluated the effects of BPA and its analogues BPS, BPF, and BPAF on the mitochondrial mass and function, oxidative stress, and their potential to induce apoptosis of human granulosa cells (KGN cells). BPA and its analogues, especially BPA and BPAF, significantly decreased mitochondrial activity and cell viability. The potential of bisphenols to reduce mitochondrial mass and function differed in the following order: BPAF > BPA > BPF > BPS. Flow cytometry revealed that exposure to bisphenols significantly increased mitochondrial ROS levels and increased mitochondrial Ca2+ levels. Thus, bisphenols exposure causes mitochondrial stress in KGN cells. At the same time, bisphenols exposure significantly induced apoptosis. These results thus emphasize the toxicity of these bisphenols to cells. Our study suggests the action mechanism of BPA and its analogues in damage caused to ovarian granulosa cells. Additionally, these novel analogues may be regrettable substitutes, and the biological effects and potential risks of BPA alternatives must be evaluated.

A combined in vitro-in silico method for assessing the androgenic activities of bisphenol A and its analogues.

Interactions between endocrine-disruptor chemicals (EDCs) and androgen receptor (AR) have adverse effects on the endocrine system, leading to human reproductive dysfunction. Bisphenol A (BPA) is an EDC that can damage both the environment and human health. Although numerous BPA analogues have been produced as substitutes for BPA, few studies have evaluated their endocrine-disrupting abilities. We assessed the (anti)-androgenic activities of BPA and its analogues using a yeast-based reporter assay. The BPA analogues tested were bisphenol S (BPS), 4-phenylphenol (4PP), 4,4'-(9-fluorenyliden)-diphenol (BPFL), tetramethyl bisphenol F (TMBPF), and tetramethyl bisphenol A (TMBPA). We also conducted molecular docking and dynamics simulations to assess the interactions of BPA and its analogues with the ligand-binding domain of human AR (AR-LBD). Neither BPA nor its analogues had androgenic activity; however, all except BPFL exerted robust anti-androgenic effects. Consistent with the in vitro results, anti-androgenic analogues of BPA formed hydrogen bonding patterns with key residues that differed from the patterns of endogenous hormones, indicating that the analogues display in inappropriate orientations when interacting with the binding pocket of AR-LBD. Our findings indicate that BPA and its analogues disrupt androgen signaling by interacting with the AR-LBD. Overall, BPA and its analogues display endocrine-disrupting activity, which is mediated by AR.

A formal vinylic substitution reaction for the synthesis of α,ß-unsaturated enol esters and their anticancer potential.

Arylsulfonyl group-bearing α,ß-unsaturated enol esters were readily assembled via the Cs2CO3-mediated union of 2-bromoallyl sulfones and cinnamic acids. The overall transformation is equivalent to an sp2 carbon-oxygen coupling reaction, and therefore constitutes a formal vinylic substitution. Several of the products display promising levels of antiproliferative activities higher than that of the anticancer drug carboplatin. Thiophenol reacted with 2-bromoallyl sulfones under identical conditions to afford α-thiophenyl-α'-tosyl acetone via an apparent aerial oxidation.

A novel class of insecticidal alkylsulfones are potent inhibitors of vesicular acetylcholine transport.

Pyridine alkylsulfone derivatives typified by oxazosulfyl (Sumitomo Chemical Company Ltd.) and compound A2 (Syngenta) represent a new class of insecticides, with potent activity against several insect orders. Whilst the MOA of this class has been attributed to interaction with the voltage-gated sodium channel (VGSC), here we present strong evidence that their toxicity to insects is mediated primarily through inhibition of the vesicular acetylcholine transporter (VAChT). Alkylsulfone intoxication in insects is characterised by (i) a reduction in cholinergic synaptic transmission efficiency demonstrated by a depression of cercal afferent activity in giant-interneurone preparations of American cockroach (Periplaneta americana), (ii) selective block of cholinergic-transmission dependent post-synaptic potentials in the Drosophila giant-fibre pathway and (iii) abolition of miniature excitatory post-synaptic currents (mEPSCs) in an identified synapse in Drosophila larvae. Ligand-binding studies using a tritiated example compound ([3H]-A1) revealed a single saturable binding-site, with low nanomolar Kd value, in membrane fractions of green bottle fly (Lucilia sericata). Binding is inhibited by vesamicol and by several examples of a previously identified class of insecticidal compounds known to target VAChT, the spiroindolines. Displacement of this binding by analogues of the radioligand reveals a strong correlation with insecticidal potency. No specific binding was detected in untransformed PC12 cells but a PC12 line stably expressing Drosophila VAChT showed similar affinity for [3H]-A1 as that seen in fly head membrane preparations. Previously identified VAChT point mutations confer resistance to the spiroindoline class of insecticides in Drosophila by Gal-4/UAS directed expression in cholinergic neurones and by CRISPR gene-editing of VAChT, but none of these flies show detectable cross-resistance to this new chemical class. Oxazosulfyl was previously shown to stabilise voltage-gated sodium channels in their slow-inactivated conformation with an IC50 value of 12.3µM but inhibits binding of [3H]-A1 with approximately 5000 times greater potency. We believe this chemistry class represents a novel mode-of-action with high potential for invertebrate selectivity.

Polyethersulfone Polymer for Biomedical Applications and Biotechnology.

Polymers stand out as promising materials extensively employed in biomedicine and biotechnology. Their versatile applications owe much to the field of tissue engineering, which seamlessly integrates materials engineering with medical science. In medicine, biomaterials serve as prototypes for organ development and as implants or scaffolds to facilitate body regeneration. With the growing demand for innovative solutions, synthetic and hybrid polymer materials, such as polyethersulfone, are gaining traction. This article offers a concise characterization of polyethersulfone followed by an exploration of its diverse applications in medical and biotechnological realms. It concludes by summarizing the significant roles of polyethersulfone in advancing both medicine and biotechnology, as outlined in the accompanying table.

Optimization of benzenesulfonyl derivatives as anti-Trypanosomatidae agents: Structural design, synthesis, and pharmacological assessment against Trypanosoma cruzi and Leishmania infantum.

Leishmaniasis and Chagas disease are neglected tropical diseases caused by Trypanosomatidae parasites. Given the numerous limitations associated with current treatments, such as extended treatment duration, variable efficacy, and severe side effects, there is an urgent imperative to explore novel therapeutic options. This study details the early stages of hit-to-lead optimization for a benzenesulfonyl derivative, denoted as initial hit, against Trypanossoma cruzi (T. cruzi), Leishmania infantum (L. infantum) and Leishmania braziliensis (L. braziliensis). We investigated structure - activity relationships using a series of 26 newly designed derivatives, ultimately yielding potential lead candidates with potent low-micromolar and sub-micromolar activities against T. cruzi and Leishmania spp, respectively, and low in vitro cytotoxicity against mammalian cells. These discoveries emphasize the significant promise of this chemical class in the fight against Chagas disease and leishmaniasis.

Biofouling mitigation of Nb2AlC and Mo3AlC2 MXene-precursors doped polyether sulfone mixed matrix membranes for pathogen microorganisms.

This study explores the incorporation of Nb2AlC and Mo3AlC2 MAX phases, known for their nano-layered structure, into polyether sulfone (PES) membranes to enhance their antifouling and permeability properties for pathogen microorganism filtration against bovine serum albumin (BSA) and Escherichia coli (E. coli). The composite membranes were characterized for their structural and morphological properties, and their performance in mitigating biofouling was evaluated. The structural characterizations have been performed for all the prepared MAX phases and corresponding composite membranes. The antioxidant ability of Nb2AlC and Mo3AlC2 MAX phases was defined by the DPPH radical scavenging assay, and the highest antioxidant ability was found to be 59.35 %, while 53.69 % scavenging potential was recorded at 100 mg/L. The percentage scavenging ability was raised with an increase in concentrations. The antimicrobial properties of MAX phases, evaluated as the minimum inhibitory concentration, were stated against several pathogen microorganisms. The tested compounds of Nb2AlC and Mo3AlC2 composites containing MAX phases exhibited excellent chemical nuclease activity, and it was determined that Nb2AlC caused double strand DNA cleavage activity while Mo3AlC2 induced the complete fragmentation of the DNA molecule. Biofilm inhibition of Nb2AlC and Mo3AlC2 MAX phases was studied against Staphylococcus aureus, and Pseudomonas aeruginosa and the maximum biofilm inhibition of Nb2AlC and Mo3AlC2 MAX phases was found to be 77.15 % and 69.07 % against S. aureus and also 69.74 % and 65.01 % against P. aeruginosa. Furthermore, Nb2AlC and Mo3AlC2 MAX phases demonstrated excellent E. coli growth inhibition of 100 % at 125 and 250 mg/L.

Enhanced gas separation performance for H2 purification using MIL-68(ln)-nh2/PES mixed-matrix membranes.

The growing demand for sustainable and efficient gas separation technologies has prompted the exploration of advanced materials to enhance the gas permeability and selectivity. Polyethersulfone (PES) membranes are widely used in gas separation, gas upgrading, and clean energy production owing to their environmental friendliness and low cost. However, their gas permeability and selectivity can be further improved for commercial application. This study explored the incorporation of 10 wt % of MIL-68(ln)-NH2 into PES membranes using a phase-inversion approach to enhance gas permeability and selectivity. The morphological, structural, and thermal properties of the resulting MOF/PES membrane were characterized using SEM, AFM, BET, XRD, FTIR, and TGA-DTG. Gas permeation experiments were conducted using different gases (CO2, N2, CH4, and H2) under different heating conditions (20-60 °C) to evaluate the gas permeability and selectivity of the MOF/PES membrane. The results showed that the incorporation of MOF into the mixed matrix membrane (MMMs) led to a 9% increase in porosity, 87% reduction in roughness, and 32% decrease in pore size compared to neat PES membranes. Significant changes in the morphology, crystallinity, and thermal stability were observed, with notable improvements of up to 22%. Moreover, the MOF/PES membrane exhibited high gas permeability (CO2 = 124656, N2 = 83650, CH4 = 159298, and H2 = 427075 Barrer) and selectivity (H2/N2 = 5.7, H2/CO2 = 4, CH4/N2 = 2, and CH4/CO2 = 1.7) for flammable gases. The optimal gas separation performance was observed at 20 °C and 60 °C for H2/N2 and H2/CO2 separation, respectively. These findings demonstrate the potential of MOF-based PES membranes for gas separation applications, particularly in H2 purification.

Mucus-coated, magnetically-propelled fecal surrogate to mimic fecal shear forces on colonic epithelium.

The relationship between the mechanical forces associated with bowel movement and colonic mucosal physiology is understudied. This is partly due to the limited availability of physiologically relevant fecal models that can exert these mechanical stimuli in in vitro colon models in a simple-to-implement manner. In this report, we created a mucus-coated fecal surrogate that was magnetically propelled to produce a controllable sweeping mechanical stimulation on primary intestinal epithelial cell monolayers. The mucus layer was derived from purified porcine stomach mucins, which were first modified with reactive vinyl sulfone (VS) groups followed by reaction with a thiol crosslinker (PEG-4SH) via a Michael addition click reaction. Formation of mucus hydrogel network was achieved at the optimal mixing ratio at 2.5 % w/v mucin-VS and 0.5 % w/v PEG-4SH. The artificial mucus layer possessed similar properties as the native mucus in terms of its storage modulus (66 Pa) and barrier function (resistance to penetration by 1-µm microbeads). This soft, but mechanically resilient mucus layer was covalently linked to a stiff fecal hydrogel surrogate (based on agarose and magnetic particles, with a storage modulus of 4600 Pa). The covalent bonding between the mucus and agarose ensured its stability in the subsequent fecal sliding movement when tested at travel distances as long as 203 m. The mucus layer served as a lubricant and protected epithelial cells from the moving fecal surrogate over a 1 h time without cell damage. To demonstrate its utility, this mucus-coated fecal surrogate was used to mechanically stimulate a fully differentiated, in vitro primary colon epithelium, and the physiological stimulated response of mucin-2 (MUC2), interleukin-8 (IL-8) and serotonin (5HT) secretion was quantified. Compared with a static control, mechanical stimulation caused a significant increase in MUC2 secretion into luminal compartment (6.4 × ), a small but significant increase in IL-8 secretion (2.5 × and 3.5 × , at both luminal and basal compartments, respectively), and no detectable alteration in 5HT secretion. This mucus-coated fecal surrogate is expected to be useful in in vitro colon organ-on-chips and microphysiological systems to facilitate the investigation of feces-induced mechanical stimulation on intestinal physiology and pathology.

Synthesis of MOF-5/polyethersulfone (PES) mixed matrix membranes for enhancing membrane filtration performance in polyphenol purification.

The various apple products industries produce a large amount of apple residue, which is easily fermented, causes environmental pollution, and its disposal cost is high, but is rich in nutrients, such as polyphenols. Polyphenols can be purified to realize high-value deep processing of apple pomace and to promote energy reuse of food waste. In this study, the highly selective purification of polyphenols was achieved by membrane filtration using prepared Metal-organic framework (MOF)-5/PES mixed matrix membranes with apple peels as raw material. The polyethersulfone mixed matrix membrane was loaded with MOF-5 by the phase inversion method, and their structural and physicochemical properties were characterized by scanning electron microscopy (SEM), and X-ray diffraction (XRD). Zeta potential and specific surface area of MOF-5 particles were measured, as well as the water contact angle and anti-fouling properties of the mixed matrix membrane were analyzed. It was confirmed that the membrane loaded with MOF-5 showed better hydrophilicity and mechanical properties compared with the pristine polyether sulfone membrane. Under practical conditions, the increased hydrophilicity could enhance the anti-fouling properties of membranes, which would improve the flux recovery ratio of membranes. In addition, the prepared MOF-5/PES mixed matrix membrane was applied to the purification of polyphenols, showing excellent purification performance of polyphenols. In particular, the purity of polyphenol after membrane filtration could reach 70.45% when the additional amount of MOF-5 was 10%. This research provides a method to prepare MOF-5/PES mixed matrix membranes, which effectively solves the problem of unstable and unsatisfactory purification effect of commercially available membranes, promotes the development of new materials in membrane science, and realizes high-value deep processing and comprehensive resource development of food waste using membrane filtration.

Constructing porous ZnFC-PA/PSF composite spheres for highly efficient Cs+ removal.

Radioisotope leaking from nuclear waste has become an intractable problem due to its gamma radiation and strong water solubility. In this work, a novel porous ZnFC-PA/PSF composite sphere was fabricated by immobilization of ferrocyanides modified zinc phytate into polysulfone (PSF) substrate for the treatment of Cs-contaminated water. The maximum adsorption capacity of ZnFC-PA/PSF was 305.38 mg/g, and the removal efficiency of Cs+ was reached 94.27% within 2 hr. The ZnFC-PA/PSF presented favorable stability with negligible dissolution loss of Zn2+ and Fe2+ (< 2%). The ZnFC-PA/PSF achieved high-selectivity towards Cs+ (Kd = 2.24×104 mL/g) even in actual geothermal water. The adsorption mechanism was inferred to be the ion-exchange between Cs+ and K+. What's more, ZnFC-PA/PSF worked well in the fixed-bed adsorption (E = 91.92%), indicating the application potential for the hazardous Cs+ removal from wastewater.

The vinyl sulfone motif as a structural unit for novel drug design and discovery.

INTRODUCTION: Vinyl sulfones are a special sulfur-containing structural unit that have attracted considerable attention, owing to their important role in serving as key structural motifs of various biologically active compounds as well as serving as versatile building blocks for organic transformations. The synthetic strategy of vinyl sulfone derivatives has been substantially upgraded over the past 30 years, and the wide application of this functional group in drug design and discovery has been promoted. AREA COVERED: In this review, the authors review the application of vinyl sulfones in drug discovery and select optimized compounds which might have significant impact or potential inspiration for drug design. EXPERT OPINION: Vinyl sulfones have been reported to target various macromolecular targets via non-covalent or covalent interactions, including multiple kinases, tubulin, cysteine protease, transcription factor, and so on. Thus, it has been significantly applied as a privileged scaffold in the design of anticancer, anti-infective, anti-inflammatory, and neuroprotective agents. However, much work remains to be done to improve the drug-like properties, such as chemical and metabolic stability, ADME, and toxicity. Besides, the chemical space of vinyl sulfones needs to be expanded, including but not limited to the design of constrained endocyclic and exocyclic vinyl sulfones.

Synthesis and biological evaluation of sulfonylpyridine derivatives as potential anti-chlamydia agents.

Chlamydia trachomatis is the most prevalent sexually transmitted bacterial infection in the United States and the world. This pathogen can cause health problems ranging from trachoma (blindness) to damage of the fallopian tubes or ectopic pregnancy, which can be life-threatening if not treated properly. To this day, there is no chlamydia-specific drug on the market. Previously, we reported the activity and basic structure-activity relationships (SAR) of sulfonylpyridine molecules that possess antichlamydial action. Based on those results, we prepared a new series of derivatives. Our data indicate the new analogs can halt the growth of C. trachomatis. The lead compound, 22, was more active than our previous molecules and did not affect the growth of S. aureus and E. coli, suggesting bacterial selectivity. We performed docking studies on the presumed target, the cylindrical protease of Chlamydia. The in-silico studies partially explained the in vitro biological result as well as predicted a possible binding pose in the binding pocket. The top compound displayed a good cytotoxicity profile towards mammalian cell lines and was stable in both serum and stimulated gastric fluid. The presented data suggests the sulfonylpyridines are promising and selective anti-chlamydial compounds that merit further structural optimization.

Biological treatment of perfluorooctanesulfonic acid (PFOS) using microbial capsules of a polysulfone membrane.

Perfluorooctanesulfonic acid (PFOS) is a persistent organic substance that has been extensively applied in many industries and causes severe, widespread adverse health impacts on humans and the environment. The development of an effective PFOS treatment method with affordable operational costs has been expected. This study proposes the biological treatment of PFOS using microbial capsules enclosing a PFOS-reducing microbial consortium. The objective of this study was to evaluate the performance of the polymeric membrane encapsulation technique for the biological removal of PFOS. First, a PFOS-reducing bacterial consortium, composed of Paracoccus (72%), Hyphomicrobium (24%), and Micromonosporaceae (4%), was enriched from activated sludge by acclimation and subsequent subculturing with PFOS containing media. The bacterial consortium was first immobilized in alginate gel beads, then enclosed in membrane capsules by coating the gel beads with a 5% or 10% polysulfone (PSf) membrane. The introduction of microbial membrane capsules could increase PFOS reduction to between 52% and 74% compared with free cell suspension, which reduced by 14% over three weeks. Microbial capsules coated with 10% PSf membrane demonstrated the highest PFOS reduction at 80% and physical stability for six weeks. Candidate metabolites including perfluorobutanoic acid (PFBA) and 3,3,3- trifluoropropionic acid were detected by FTMS, suggesting the possible biological degradation of PFOS. In microbial membrane capsules, the initial adsorption of PFOS on the shell membrane layer enhanced subsequent biosorption and biological degradation by PFOS-reducing bacteria immobilized in the core alginate gel beads. The 10%-PSf microbial capsules exhibited a thicker membrane layer with the fabric structure of a polymer network, which maintained longer physical stability than 5%-PSf microbial capsules. This outcome suggests the potential application of microbial membrane capsules to PFOS-contaminated water treatment.

Iron-catalyzed regioselective synthesis of (E)-vinyl sulfones mediated by unprotected hydroxylamines.

An Fe-catalyzed unprotected hydroxylamine mediated Heck-type coupling between sulfinic acids and alkenes for the regioselective synthesis of (E)-vinyl sulfones has been developed. Mechanism studies indicated for the first time that a radical process may be involved and that hydroxylamines play multiple roles, including those of a mild oxidant and an in situ base. It was found for the first time that this transformation not only realizes C-S bond construction promoted by unprotected hydroxylamines, but also provides a practical and complementary method for the preparation of structurally important (E)-vinyl sulfones.

Thioterpenoids as Potential Antithrombotic Drugs: Molecular Docking, Antiaggregant, Anticoagulant and Antioxidant Activities.

Natural monoterpenes and their derivatives are widely considered as effective ingredients for the design and production of new biologically active compounds with high antioxidant, antimicrobial and anti-protozoa properties. In this study, we synthesized two series of thiotherpenoids "sulfide-sulfoxide-sulfone", with different bicyclic monoterpene skeleton (bornane and pinane) structures. The effect of the obtained compounds on platelet aggregation was investigated by using the molecular docking technique. The obtained data revealed that all the synthesized compounds may act as potential inhibitors of platelet aggregation. Moreover, the studied sulfides have shown high antioxidant activity as revealed by lipid peroxidation (LPO) process inhibition in a non-cellular substrate containing animal lipids. The sulfides were able to inhibit erythrocyte oxidative hemolysis, to reduce the accumulation of secondary LPO products in cells and to prevent the oxidation of native oxyhemoglobin. Additionally, the corresponding sulfones and sulfoxides exhibited insignificant antioxidant activity. However, the sulfides were found to exhibit significant antiaggregant and anticoagulant effects. These findings suggest as well that the sulfides could serve as a leader compound for future research and possible practical applications.

Synthesis of Quinoline Silyloxymethylsulfones as Intermediates to Sulfonyl Derivatives.

Heterocyclic sulfones, sulfonamides, and sulfonyl fluorides constitute an important structural motif in medicinal chemistry. Methods to make six-membered heteroaromatic sulfonyl compounds, however, remain challenging, and most efforts rely on commercial sulfonyl chlorides. We report herein the reaction of sodium tert-butyldimethyl silyloxymethylsulfinate with quinoline N-oxides to selectively furnish C2-substituted sulfones. The silyloxymethylsulfinate can be deprotected to then form sulfonyl fluorides, sulfonamides, and sulfones. This transformation is scalable and has broad applicability to a wide array of quinoline and isoquinoline functionality.

Decarboxylative Sulfinylation Enables a Direct, Metal-Free Access to Sulfoxides from Carboxylic Acids.

The intermediate oxidation state of sulfoxides is central to the plethora of their applications in chemistry and medicine, yet it presents challenges for an efficient synthetic access, limiting the structural diversity of currently available sulfoxides. Here, we report a data-guided development of direct decarboxylative sulfinylation that enables the previously inaccessible functional group interconversion of carboxylic acids to sulfoxides in a reaction with sulfinates. Given the broad availability of carboxylic acids and the growing synthetic potential of sulfinates, the direct decarboxylative sulfinylation is poised to improve the structural diversity of synthetically accessible sulfoxides. The reaction is facilitated by a kinetically favored sulfoxide formation from the intermediate sulfinyl sulfones, despite the strong thermodynamic preference for the sulfone formation, unveiling the previously unknown and chemoselective radicalophilic sulfinyl sulfone reactivity.