Bacterial cellulose nanocrystals obtained through enzymatic and acidic routes: A comparative study of their main properties and in vitro biological responses.

Cellulose nanocrystals (CNCs) are crystalline domains isolated from cellulosic fibers. They have been utilized in a wide range of applications, such as reinforcing fillers, antibacterial agents and manufacturing of biosensors. Whitin this context, the aim of this work was to obtain and analyze CNCs extracted from bacterial nanocellulose (BNC) using two distinct methods combined with milling pre-treatment: an acidic hydrolysis using 64 % sulfuric acid and an enzymatic hydrolysis using a commercial cellulase enzyme mixture. The CNCs obtained from the enzymatic route (e-CNCs) were observed to be spherical nanoparticles with diameter of 56 ± 11 nm. In contrast, the CNCs from the acid hydrolysis (a-CNCs) appeared as needle-shaped nanoparticles with a high aspect ratio with lengths/widths of 158 ± 64 nm/11 ± 2 nm. The surface zeta potential (ZP) of the a-CNCs was -30,8 mV, whereas the e-CNCs has a potential of +2.70 ± 3.32 mV, indicating that a-CNCs consisted of negatively charged particles with higher stability in solution. Although the acidic route resulted in nanocrystals with a slightly higher crystallinity index compared to the enzymatic route, e-CNCs was found to be more thermally stable than BNC and a-CNCs. Here, we also confirmed the safety of a-CNCs and e-CNCs using L929 cell line. Lastly, this article describes two different CNCs synthesis approaches that leads to the formation of nanoparticles with different dimensions, morphology and unique physicochemical properties. To the best of our knowledge, this is the first study to yield spherical nanoparticles as a result of BNC enzymatic treatment.

Surface Bioactivation of Polyether Ether Ketone (PEEK) by Sulfuric Acid and Piranha Solution: Influence of the Modification Route in Capacity for Inducing Cell Growth.

The aim of this study was to promote bioactivity of the PEEK surface using sulfuric acid and piranha solution. PEEK was functionalized by a sulfuric acid treatment for 90 s and by piranha solution for 60 and 90 s. Chemical modification of the PEEK surface was evaluated by infrared spectroscopy, contact angle analysis, cytotoxicity, cell adhesion and proliferation. The spectroscopy characteristic band associated with sulfonation was observed in all treated samples. PEEK with piranha solution 60 s showed an increase in the intensity of the bands, which was even more significant for the longer treatment (90 s). The introduction of the sulfonic acid functional group reduced the contact angle. In cytotoxicity assays, for all treatments, the number of viable cells was higher when compared to those of untreated PEEK. PEEK treated with sulfuric acid and piranha solution for 60 s were the treatments that showed the highest percentage of cell viability with no statistically significant differences between them. The modified surfaces had a greater capacity for inducing cell growth, indicative of effective cell adhesion and proliferation. The proposed chemical modifications are promising for the functionalization of PEEK-based implants, as they were effective in promoting bioactivation of the PEEK surface and in stimulating cell growth and proliferation.

Obtaining hemicellulosic hydrolysate from sugarcane bagasse for microbial oil production by Lipomyces starkeyi.

OBJECTIVE: The extraction of the hemicellulose fraction of sugarcane bagasse (SCB) by acid hydrolysis was evaluated in an autoclave and a Parr reactor aiming the application of the hydrolysate as a carbon source for lipid production by Lipomyces starkeyi. RESULTS: The hydrolysis that resulted in the highest sugar concentration was obtained by treatment in the Parr reactor (HHR) at 1.5% (m/v) H2SO4 and 120 °C for 20 min, reaching a hemicellulose conversion of approximately 82%. The adaptation of the yeast to the hydrolysate provided good fermentability and no lag phase. The fermentation of hemicellulose-derived sugars (HHR) by L. starkeyi resulted in a 27.8% (w/w) lipid content and YP/S of 0.16 g/l.h. Increasing the inoculum size increased the lipid content by approximately 61%, reaching 44.8% (w/w). CONCLUSION: The hemicellulose hydrolysate from SCB is a potential substrate for L. starkeyi to produce lipids for biodiesel synthesis based on the biorefinery concept.

Development of a purification process via crystallization of xylitol produced for bioprocess using a hemicellulosic hydrolysate from the cashew apple bagasse as feedstock.

Xylitol was biotechnologically produced by Kluyveromyces marxianus ATCC36907 using the hemicellulosic hydrolysate of the cashew apple bagasse (CABHH). Sequentially, the present study investigated the recovery and purification of xylitol evaluating different antisolvents [ethanol, isopropanol and the ionic liquid 2-hydroxyl-ethylammonium acetate (2-HEAA)], their proportion in the medium (10-90% v/v), and their cooling rate (VC 0.25-0.50 °C/min). These processes were contrasted with the crystallization process of commercial xylitol. This study is the first to assess xylitol crystallization using a protic ionic liquid. The hydrolysate obtained from a mild treatment with sulfuric acid contained mainly glucose and xylose at concentrations of 15.7 g/L and 11.9 g/L, respectively. With this bioprocess, a maximum xylitol production of 4.5 g/L was achieved. The performance of the investigated antisolvents was similar in all conditions evaluated in the crystallization process of the commercial xylitol, with no significant difference in yields. For the crystallization processes of the produced xylitol, the best conditions were: 50% (v/v) isopropanol as antisolvent, cooling rate of 0.5 °C/min, with a secondary nucleation of yield and purity of 69.7% and 84.8%, respectively. Under the same linear cooling rate, using ethanol, isopropanol or the protic ionic liquid 2-hydroxyl-ethylammonium acetate (2-HEAA), crystallization did not occur, probably due to the presence of carbohydrates not metabolized by the yeast in the broth, which influences the solubility curve of xylitol. With the results of this work, a possible economical and environmentally friendly process of recovery and purification of xylitol from CABHH could be proposed.

Validated spectrophotometric method for quantification of total triterpenes in plant matrices.

BACKGROUND: Triterpenes are ubiquitous secondary metabolites present in plants. They can be found in both forms, as genins or conjugated as glycosides. Although distinct analytical methods to quantify these compounds in vegetal tissues are available in the literature, limitations like high cost, complexity on sample preparation, and selectivity are often challenging issues. This study aimed to develop and to validate a simple and rapid spectrophotometric method to detect and quantify total triterpenes in plant matrices. METHODS: The assay was conducted directly into glass tubes using vanillin, acetic acid, and sulphuric acid as reagents, and ß-sitosterol as reference standard. The samples were analyzed at 548 nm assessing the quality parameters of selectivity, linearity, precision, accuracy, limit of detection (LOD), limit of quantification (LOQ), and robustness. RESULTS: The method was selective, with precision and accuracy varying from 0.56% to 4.98% and 96.63% to 113.87%, respectively. The values of the limit of detection and quantification were 0.042 µg.mL-1 and 0.14 µg.mL-1, correspondingly. The correlation coefficient (r) at the concentration range of 3.08 µg.mL-1to 24.61 µg.mL-1 was 0.9998. The total of triterpenes found in of B. holophylla and M. ilicifolia leaves were 132.36 ± 20.36 mg EßS.g-1 of dry extract and 53.91 ± 2.6 mg EßS.g-1 of dry extract, respectively. CONCLUSION: The method was reliable to quantify total triterpenes extracted from Maytenus ilicifolia and Bauhinia holophylla. Graphical abstract.

The alkylaminoalkanethiosulfuric acids exhibit in-vitro antileishmanial activity against Leishmania (Viannia) braziliensis: a new perspective for use of these schistosomicidal agents.

The alkylaminoalkanethiosulfuric acids (AAATs) are amphipathic compounds effective against experimental schistosomiasis, of low toxicity, elevated bioavailability after a single oral dose and prompt tissue absorption. OBJECTIVES: To explore the in-vitro antileishmanial potential of AAATs using five compounds of this series against Leishmania (Viannia) braziliensis. METHODS: Their effects on promastigotes and axenic amastigotes, and cytotoxicity to macrophages were tested by the MTT method, and on Leishmania-infected macrophages by Giemsa stain. Effects on the mitochondrial membrane potential of promastigotes and axenic amastigotes and DNA of intracellular amastigotes were tested using JC-1 and TUNEL assays, respectively. KEY FINDINGS: The 2-(isopropylamino)-1-octanethiosulfuric acid (I) and 2-(sec-butylamino)-1-octanethiosulfuric acid (II) exhibit activity against both promastigotes and intracellular amastigotes (IC50 25-35 µm), being more toxic to intracellular parasites than to the host cell. Compound I induced a loss of viability of axenic amastigotes, significantly reduced (30%) the mitochondrial membrane potential of both promastigotes and axenic amastigotes and promoted selective DNA fragmentation of the nucleus and kinetoplast of intracellular amastigotes. CONCLUSIONS: In this previously unpublished study of trypanosomatids, it is shown that AAATs could also exhibit selective antileishmanial activity, a new possibility to be investigated in oral treatment of leishmaniasis.

High concentration and yield production of mannose from açaí (Euterpe oleracea Mart.) seeds via mannanase-catalyzed hydrolysis.

The açaí seed corresponds to approximately 85% of the fruit's weight and represents ~1.1 million metric tons of residue yearly accumulated in the Amazon region, resulting in an acute environmental and urban problem. To extract the highest value from this residue, this study aimed to evaluate its chemical composition to determine the appropriate applications and to develop conversion methods. First, mannan was confirmed as the major component of mature seeds, corresponding to 80% of the seed's total carbohydrates and about 50% of its dry weight. To convert this high mannan content into mannose, a sequential process of dilute-acid and enzymatic hydrolysis was evaluated. Among different dilute-H2SO4 hydrolysis conditions, 3%-acid for 60-min at 121 °C resulted in a 30% mannan hydrolysis yield and 41.7 g/L of mannose. Because ~70% mannan remained in the seed, a mannanase-catalyzed hydrolysis was sequentially performed with 2-20% seed concentration, reaching 146.3 g/L of mannose and a 96.8% yield with 20% solids. As far as we know, this is the highest reported concentration of mannose produced from a residue. Thus, this work provides fundamental data for achieving high concentrations and yields of mannose from açaí seeds, which could add commercial value to the seeds and improve the whole açaí productive chain.

Effects of by-products of fermentation of banana pseudostem on ethanol separation by pervaporation.

In this work, we performed recovery of ethanol from a fermentation broth of banana pseudostem by pervaporation (PV) as a lower-energy-cost alternative to traditional separation processes such as distillation. As real fermentation systems generally contain by-products, it was investigated the effects of different components from the fermentation broth of banana pseudostem on PV performance for ethanol recovery through commercial flat sheet polydimethylsiloxane (PDMS) membrane. The experiments were compared to a binary solution (ethanol/water) to determine differences in the results due to the presence of fermentation by-products. A real fermented broth of banana pseudostem was also used as feed for the PV experiments. Seven by-products from fermented broth were identified: propanol, isobutanol, methanol, isoamyl alcohol, 1-pentanol, acetic acid, and succinic acid. Moreover, the residual sugar content of 3.02 g/L1 was obtained. The presence of methanol showed the best results for total permeate flux (0.1626 kg·m-2 ·h-1 ) and ethanol permeate flux (0.0391 kg·m-2 ·h-1 ) during PV at 25°C and 3 wt% ethanol, also demonstrated by the selectivity and enrichment factor. The lowest total fluxes of permeate were observed in the experiments containing the acids. Better permeance of 0.1171 from 0.0796 kg·m-2 ·h-1 and membrane selectivity of 9.77 from 9.30 were obtained with real fermentation broth than with synthetic solutions, possibly due to the presence of by-products in the multicomponent mixtures, which contributed to ethanol permeation. The results of this work indicate that by-products influence pervaporation of ethanol with hydrophobic flat sheet membrane produced from the fermented broth of banana pseudostem.

Influence of mechanical pretreatment to isolate cellulose nanocrystals by sulfuric acid hydrolysis.

The mechanical pretreatments intensities on characteristics of cellulose nanocrystals (CNC) prior to acid hydrolysis was evaluated. The cellulose was submitted to mechanical pretreatment as: magnetic stirring (CNCst), blending (CNCbl) or grinding by 20 (CNC20x) and 40 (CNC40x) passages in a super mass colloid mill. Then, all samples were submitted to H2SO4 hydrolysis and the CNC were evaluated by total mass yield (TMY%), rheological behavior, size distribution for width/length (WD), crystallinity index (CI%), OSO3- substitution degree (SD) and zeta potential (ζ). After hydrolysis samples exhibited the same SD (190 ±â€¯5 mMol·kg-1), ζ (-55 ±â€¯3 mV) and CI% (65 ±â€¯2), differing only in TMY% and WD. The CNCst showed TMY% of 85%, WD of 8 ±â€¯5 nm and 100-800 nm, with presence of cellulose nanofibers (CNF), suggesting incomplete hydrolysis. The CNCbl and CNC20x revealed TMY% of 65 ±â€¯1, but differed in WD of 8 ±â€¯5 nm and 300 ±â€¯200 nm and 8 ±â€¯5 nm and 200 ±â€¯170 nm, respectively. The results showed that the grinding mechanical pretreatment is mandatory for CNF isolation, but not for CNC. Stability profile after the hydrolytic procedure, CI%, morphology and similar character generated CNC with adequate features and good yield, by simple mechanical stirring or blending, reducing the production's cost and allowing industrial-scale production.

Optimization of Lignin-Based Biocatalyst Production from Pine Sawdust and Wheat Straw.

Pine sawdust and wheat straw are abundant lignocellulosic wastes that have been recently converted into bioethanol under a biochemical platform scheme whose main waste is lignin. Lignin can be transformed into a wide variety of high added-value products, including its functionalization as a catalyst. A key step in the synthesis of a lignin-based catalyst is the sulfonation reaction, whose operating conditions, namely, H2SO4 to lignin ratio (mL/g), temperature and time, have been arbitrarily chosen. In this contribution, an optimization methodology (i.e., Box-Behnken) is applied in order to found the operating conditions during the sulfonation reaction that maximizes the total acid sites density of lignin-based catalysts from pine sawdust and wheat straw. The optimization results show that the time in sulfonation reactions can be significantly reduced, compared to those previously reported, without affecting the performance of both catalysts in esterification reactions. These results could be further considered for energy and costs reduction purposes during the conceptual design engineering of the sulfonation reaction.

Detection of coffee adulteration with soybean and corn by capillary electrophoresis-tandem mass spectrometry.

The detection of coffee adulteration with soybean and corn by capillary electrophoresis-tandem mass spectrometry was accomplished by evaluating the monosaccharides profile obtained after acid hydrolysis of the samples. The acid hydrolysis, using H2SO4 as a catalyst, increases the ionic strength of the sample impairing the electrophoretic separation. Therefore, Ba(OH)2 was used to both neutralize the medium and reduce the content of sulfate by precipitation of BaSO4. The best separation of nine determined monosaccharides (fucose, galactose, arabinose, glucose, rhamnose, xylose, mannose, fructose and ribose) plus inositol as internal standard was obtained in 500 mmol·L-1 triethylamine, pH 12.3. The monosaccharides are separated as anionic species at this pH. The proposed method is simple, fast (<12.0 min), present linear calibration curves (r2 = 0.995), and relative standard deviation for replicate injections lower than 5%. The LOQ for all monosaccharides was lower than 0.01 mmol·L-1, which is in accordance with the tolerable limits for coffee. Principal component analysis (PCA) was used to evaluate interrelationships between the monosaccharide profile and the coffee adulteration with different proportions of soybean and corn. Fucose, galactose, arabinose, glucose, sucrose, rhamnose, xylose, mannose, fructose, and ribose were quantified in packed roast-and-ground commercial coffee samples, and differences between adulterated and unadulterated coffees could be detected.

Removal of Procion Red dye from colored effluents using H2SO4-/HNO3-treated avocado shells (Persea americana) as adsorbent.

The treatment of colored effluents containing Procion Red dye (PR) was investigated using H2SO4 and HNO3 modified avocado shells (Persea americana) as adsorbents. The adsorbent materials (AS-H2SO4 and AS-HNO3) were properly characterized. The adsorption study was carried out considering the effects of adsorbent dosage and pH. Kinetic, equilibrium, and thermodynamic aspects were also evaluated. Finally, the adsorbents were tested to treat simulated dye house effluents. For both materials, the adsorption was favored using 0.300 g L-1 of adsorbent at pH 6.5, where, more than 90% of PR was removed from the solution. General order model was able to explain the adsorption kinetics for both adsorbents. The Sips model was adequate to represent the isotherm data, being the maximum adsorption capacities of 167.0 and 212.6 mg g-1 for AS-H2SO4 and AS-HNO3, respectively. The adsorption processes were thermodynamically spontaneous, favorable (- 17.0 < ΔG 0 < - 13.2 kJ mol-1), and exothermic (ΔH 0 values of - 29 and - 55 kJ mol-1). AS-H2SO4 and AS-HNO3 were adequate to treat dye house effluents, attaining color removal percentages of 82 and 75%. Avocado shells, after a simple acid treatment, can be a low-cost option to treat colored effluents.

Addition of Surfactants and Non-Hydrolytic Proteins and Their Influence on Enzymatic Hydrolysis of Pretreated Sugarcane Bagasse.

Poly(ethylene glycol) (PEG 4000) and bovine serum albumin (BSA) were investigated with the purpose of evaluating their influence on enzymatic hydrolysis of sugarcane bagasse. Effects of these supplements were assayed for different enzymatic cocktails (Trichoderma harzianum and Penicillium funiculosum) that acted on lignocellulosic material submitted to different pretreatment methods with varying solid (25 and 100 g/L) and protein (7.5 and 20 mg/g cellulose) loadings. The highest levels of glucose release were achieved using partially delignified cellulignin as substrate, along with the T. harzianum cocktail: increases of 14 and 18 % for 25 g/L solid loadings and of 33 and 43 % for 100 g/L solid loadings were reached for BSA and PEG supplementation, respectively. Addition of these supplements could maintain hydrolysis yield even for higher solid loadings, but for higher enzymatic cocktail protein loadings, increases in glucose release were not observed. Results indicate that synergism might occur among these additives and cellulase and xylanases. The use of these supplements, besides depending on factors such as pretreatment method of sugarcane bagasse, enzymatic cocktails composition, and solid and protein loadings, may not always lead to positive effects on the hydrolysis of lignocellulosic material, making it necessary further statistical studies, according to process conditions.

Supercritical fluids as a green technology for the pretreatment of lignocellulosic biomass.

One of the main drawbacks for using lignocellulosic biomass is related to its recalcitrance. The pretreatment of lignocellulosic biomass plays an important role for delignification and crystallinity reduction purposes. In this work rice husk (RH) was submitted to supercritical pretreatment at 80°C and 270 bar with the aim to determine the effect on lignin content, crystallinity as well as enzymatic digestibility. The yields obtained were compared with dilute sulfuric acid pretreatment as base case. Additionally a techno-economic and environmental comparison of the both pretreatment technologies was performed. The results show a lignin content reduction up to 90.6% for the sample with 75% moisture content using a water-ethanol mixture. The results for crystallinity and enzymatic digestibility demonstrated that no reductions were reached. Supercritical pretreatment presents the best economical and environmental performance considering the solvents and carbon dioxide recycling.

A facile electrochemical approach to fabricate a nanoporous gold film electrode and its electrocatalytic activity towards dissolved oxygen reduction.

A nanoporous gold film (NPGF) was prepared onto a gold electrode surface using a facile and green electrochemical approach via anodization at 2.0 V in 0.5 mol L(-1) H2SO4. The as-synthesized NPGF electrode showed superior electrocatalytic activity towards dissolved oxygen reduction at a low overpotential (-0.045 V) along with 2-fold enhanced sensitivity.

Origin of α and ß relaxations of Nafion.

Our experiments disentangle the low and high frequency dispersions in perfluorosulfonate ionomer solutions and membranes, providing a reasonable model for understanding these relaxations. Dielectric spectroscopy (DS) and small angle x-ray scattering (SAXS) measurements revealed that the dielectric relaxations observed at low (α relaxation) and high (ß relaxation) frequencies show typical features of the longitudinal and radial polarization, respectively, of rodlike polymeric aggregates. Such relaxations were attributed to counterion fluctuations in the vicinity of sulfonic acid groups, in resemblance with polyelectrolytes. Characteristic correlation lengths calculated from both DS and SAXS data are in good agreement adding further evidence to the proposed model. Such description provides insights for the understanding of the crossover from polyelectrolytes, dominated by charge repulsion, to ionomers, dominated by dipolar attraction.

A highly improved method for sensitive determination of amitriptyline in pharmaceutical formulations using an unmodified carbon nanotube electrode in the presence of sulfuric acid.

The present paper describes a novel, simple and reliable differential pulse voltammetric method for determining amitriptyline (AMT) in pharmaceutical formulations. It has been described for many authors that this antidepressant is electrochemically inactive at carbon electrodes. However, the procedure proposed herein consisted in electrochemically oxidizing AMT at an unmodified carbon nanotube paste electrode in the presence of 0.1 mol L(-1) sulfuric acid used as electrolyte. At such concentration, the acid facilitated the AMT electroxidation through one-electron transfer at 1.33 V vs. Ag/AgCl, as observed by the augmentation of peak current. Concerning optimized conditions (modulation time 5 ms, scan rate 90 mV s(-1), and pulse amplitude 120 mV) a linear calibration curve was constructed in the range of 0.0-30.0 µmol L(-1), with a correlation coefficient of 0.9991 and a limit of detection of 1.61 µmol L(-1). The procedure was successfully validated for intra- and inter-day precision and accuracy. Moreover, its feasibility was assessed through analysis of commercial pharmaceutical formulations and it has been compared to the UV-vis spectrophotometric method used as standard analytical technique recommended by the Brazilian Pharmacopoeia.

Quantitative determination of tocopherols in edible vegetable oils using electrochemical ultra-microsensors combined with chemometric tools.

We have developed an electroanalytical method to quantify different isomers of tocopherols in edible vegetable oils. The method uses the square wave voltammetry on a carbon fiber disk ultramicroelectrode in benzene/ethanol+0.1 mol L(-1)H2SO4. Because the oxidation peaks of these natural antioxidants show an important overlapping, we have used two chemometric tools to obtain the multivariate calibration model. One method was the multivariate curve resolution-alternating least square (MCR-ALS), which assumes a linear behavior, i.e., the total signal is the sum of individual signals of components, and another nonlinear method such as artificial neuronal networks (ANNs). From the accuracy and precision analysis between nominal and estimated concentrations by both methods, we could infer that the ANNs method was a good model to quantify tocopherols in edible oil samples. Recovery percentages were between 94% and 99%. In addition, we found a difference of 1.4-6.8% between the total content of tocopherols in edible oil samples and the vitamin E content declared by the manufacturers.

Understanding the adsorptive and photoactivity properties of Ag-graphene oxide nanocomposites.

Nanocomposites of graphene oxide (GO) and silver nanoparticles (AgNPs) were synthetized using a practical photochemical silver functionalization. Their photocatalytic activities were evaluated with two dyes, Rhodamine B and Indigo Carmine, under visible-light irradiation. The prepared nanocomposites were characterized by HRTEM, FESEM, XRD, Raman, FTIR and UV-vis absorption spectroscopy. These nanocomposites present new defect domains of sp(3) type in combination with several graphitic functional groups that act as nucleation sites for anchoring AgNPs, while the sp(2)-sp(3) edge defects domains of GO generate the photoactivity. Furthermore, their photocatalytic performances are governed by their large adsorption capacity, and strong interaction with dye chromophores. A comprehensive photocatalytic way underlying the importance of adsorption is suggested to explain the low visible-light responsive photoactivity of the AgNPs-GO nanocomposites and the possible binding-site saturation. Then, the usage of H2SO4 allows the production of ionic species and helps to confirm the strong adsorption of both dyes. The ability to synthesize AgNPs-GO nanocomposites with extensive adsorptive capacity is certainly of interest for the efficient removal of hazardous materials.