Biophysical studies of modified PVC sheet based on sunflower oil for antistatic and blood bags applications.

In this work, the surface of polyvinyl chloride PVC sheet was modified by blending it with sunflower seed oil SSO to obtain PVC sheet/SSO films of ratios 100/0, 90/10, 80/20, 70/30, 60/40, and 50/50 (v/v)% using the solution casting method. Various techniques were used to characterize the prepared films, besides the use of hemolysis assays and blood clot formation tests. FTIR spectra revealed that there was a good interaction between the PVC sheet and the oil. The dielectric measurement indicated that SSO addition enhanced the dielectric properties of the sheet. The study of dielectric relaxation times confirmed the interaction between SSO and the sheet. DC conductivity increased to 6 × 10-6 S/m, so it could be applied in antistatic applications. Also, SSO addition increased the value of the thermal stability. According to SEM micrographs, the film was roughened at a ratio of 60/40 and smoothed out at 50/50. This behavior was confirmed with roughness and contact angle measurement results, in which the film of ratio 60/40 had the highest value equal to (72.03°) and then decreased at 50/50 to (59.62°). These results were confirmed by XRD measurement as the crystallinity increased at the film ratio of 60/40 and decreased again at 50/50. Also, the ratio of 60/40 demonstrated a large decrease in thrombus weights along with a slight increase in hemolysis, which is within the acceptable range and has a high degree of biocompatibility, so this concentration is recommended to be used in blood bags applications.

Performance of ß-carotene-loaded nanostructured lipid carriers under dynamic in vitro digestion system: Influence of the emulsifier type.

A better understanding of how emulsifier type could differently influence the behavior of nanostructured lipid carriers (NLC) under the gastrointestinal digestion process, as well as at the cellular level, is of utmost importance for the NLC-based formulations' optimization and risk assessment in the food field. In this study, NLC composed by fully hydrogenated soybean and high-oleic sunflower oils were prepared using soy lecithin (NLC Lß) or Tween 80 (NLC Tß) as an emulsifier. ß-Carotene was entrapped within NLC developed as a promising strategy to overcome ß-carotene's low bioavailability and stability. The effect of emulsifier type on the digestibility of ß-carotene-loaded NLC was evaluated using an in vitro dynamic digestion model mimicking peristalsis motion. The influence of ß-carotene-loaded NLC on cell viability was assessed using Caco-2 cells in vitro. NLC Tß remained stable in the gastric compartment, presenting particle size (PS) similar to the initial NLC (PS: 245.68 and 218.18 nm, respectively), while NLC Lß showed lower stability (PS > 1000 nm) in stomach and duodenum phases. NLC Tß also provided high ß-carotene protection and delivery capacity (i.e., ß-carotene bioaccessibility increased 10-fold). Based on the results of digestion studies, NLC Tß has shown better physical stability during the passage through the in vitro dynamic gastrointestinal system than NLC Lß. Moreover, the developed NLC did not compromise cell viability up to 25 µg/mL of ß-carotene. Thus, the NLC developed proved to be a biocompatible structure and able to incorporate and protect ß-carotene for further food applications. PRACTICAL APPLICATION: The findings of this study hold significant implications for industrial applications in terms of developing nanostructured lipid carriers from natural raw materials widely available and used to produce other lipid-based products in the food industry, as an alternative to synthetic ones. In this respect, the ß-carotene-loaded NLC developed in this study would find a great industrial application in the food industry, which is in constant search to develop functional foods capable of increasing the bioavailability of bioactive compounds.

Unveiling the formation capacity of multicomponent oleogels: Performance of lecithin interacting with monostearate derivatives.

Oleogels have been explored as fat substitutes due to their healthier composition compared to trans and saturated fats, also presenting interesting technological perspectives. The aim of this study was to investigate the compositional perspective of multicomponent oleogels. Structuring ability of lecithin (LEC) (20 or 90 wt% of phosphatidylcholine - PC) combined with glycerol monostearate (GMS), sorbitan monostearate (SMS) or sucrose monostearate (SAC) in sunflower oil was evaluated from oleogels properties. The thermal and rheological properties, microstructure and stability of the oleogels were affected by the difference in the chemical composition of LEC and the ratio between LEC and different surfactants. Interestingly, low-phosphatidylcholine LEC (L20) performed better, although systems formed with reduced amounts of LEC tended to be softer (LEC-GMS) and present high oil holding capacity (LEC-SMS). The mixtures of LEC and monostearate-based surfactants showed different behaviors, depending on the surfactant polar head. In LEC-GMS systems, LEC hindered the self-assembly of GMS in sunflower oil, compromising mechanical properties and increasing oil release. When combined with SMS, LEC acted as a crystal habit modifier of SMS, forming a more homogeneous microstructure and producing stronger oleogels with greater oil binding capacity. However, above the threshold concentration, LEC prevented SMS self-assembly, resulting in a weaker gel. A positive interaction was found in LEC-SAC formulations in specific ratios, since SAC cannot act as a single oleogelator. Results show the impact of solubility balance played by LEC and fatty-acid derivatives surfactant when combined and used as oleogelators. This knowledge can contribute to a rational perspective in the preparation and modulation of the properties of edible oleogels.

Functional properties of cream and butter oil from milk of Holstein cows abomasally infused with increasing amounts of high-oleic sunflower fatty acids.

This research paper addresses the hypothesis that there is an optimal amount of intestinally available oleic acid (provided via abomasal infusion) to produce higher-oleic acid milk fat with satisfactory functional characteristics of cream and butter oil. A control and four increasing doses of free fatty acids from high oleic sunflower oil (HOSFA) were infused into the abomasum of four lactating dairy cows in a crossover experimental design with 7-d periods. Treatments were: (1) control (no HOSFA infused), (2) HOSFA (250 g/d), (3) HOSFA (500 g/d), (4) HOSFA (750 g/d), and (5) HOSFA (1000 g/d). All treatments included meat solubles and Tween 80 as emulsifiers. Viscosity, overrun and whipping time as well as foam firmness and stability were evaluated in whipping creams (33% fat). Solid fat content (from 0 to 40°C), melting point and firmness were determined in butter oil. Whipping time of cream increased linearly and viscosity decreased linearly as infusion of HOSFA increased. Overrun displayed a quadratic response, decreasing when 500 g/d or more was infused. Foam firmness and stability were not affected significantly by HOSFA. For butter oil, melting point, firmness, and solid fat content decreased as HOSFA infusion increased. Changes in 21 TG fractions were statistically correlated to functional properties, with 6-10 fractions showing the highest correlations consistently. Decisions on the optimal amount of HOSFA were dependent on the dairy product to which milk fat is applied. For products handled at commercial refrigeration temperatures, such as whipping cream and butter oil, the 250 g/d level was the limit to maintain satisfactory functional qualities. Palmitic acid needed to be present in at least 20% in milk fat to keep the functional properties for the products.

Antioxidant Potential and Stability of Oxidative Sunflower Oil by Using the Ethanolic Extracts of Saprophytic Edible Cultivable Mushrooms from Pakistan.

During this study, ethanol extracts of four edible mushrooms i.e., Macrocybe gigantea, Podaxis pistillaris, Lentinus tigrinus, and Pleurotus cystidiosus were prepared and investigated by TFC, TPC, FRAP, ABTS and DPPH for their antioxidant potential. The extracts were also used to check the oxidative stabilization of sunflower oil for a period of 45 d using standard methods i.e., peroxide value, free fatty acid contents and iodine value. M. gigantea extract showed the maximum flavonoids and phenolic contents and exhibited the maximum antioxidant potential among the four edible mushrooms. BHA was observed to have maximum oil stabilization potential followed by the ethanol extract of M. gigantea of 1000 ppm concentration, BHT and extract of 1000 ppm concentration of P. pistillaris. Thus, it is concluded from this study that ethanolic extracts of these mushrooms can be used as a healthy supplement to stabilize oil by replacing synthetic antioxidants that are harmful to humans.

A versatile method to fingerprint and compare the oxidative behaviour of lipids beyond their oxidative stability.

In this work we propose the use of isothermal thermogravimetry to evaluate the oxidative stability of a lipid and to evaluate how the glyceride composition affects the entire oxidative process, to quantify the oxidation undertaken by the lipid, and numerically compare the oxidative behaviour of different lipids. The innovative aspect of the present method lies in the acquisition of a prolonged "oxygen uptake" curve (4000-10,000 min) of a lipid under oxygen and in the development of a semi-empirical fitting equation for the experimental data. This provides the induction period (oxidative stability), and allows to evaluate the rate of oxidation, the rate and the magnitude of oxidative degradation, the overall mass loss and the mass of oxygen taken by the lipid upon time. The proposed approach is used to characterize the oxidation of different edible oils with different degrees of unsaturation (linseed oil, sunflower oil, and olive oil) as well as chemically simpler compounds used in the literature to model the autoxidation of vegetable oils and lipids in general: triglycerides (glyceryl trilinolenate, glyceryl trilinoleate and glyceryl trioleate) and methyl esters (methyl linoleate and methyl linolenate). The approach proves very robust and very sensitive to changes in the sample composition.

Evaluation of high oleic sunflower oil oleogels with beeswax, beeswax-glyceryl monopalmitate, and beeswax-Span80 in cookie preparation.

BACKGROUND: Shortening is used widely in cookie preparation to improve quality and texture. However, large amounts of saturated and trans fatty acids present in shortening have adverse effects on human health, and much effort has been made to reduce the use of shortening. The use of oleogels might be a suitable alternative. In this study, the oleogels of high oleic sunflower oil with beeswax (BW), BW-glyceryl monopalmitate (BW-GMP), and BW-Span80 (BW-S80) were prepared and their suitability to replace shortening in cookie preparation was evaluated. RESULTS: The solid fat content of BW, BW-GMP, and BW-S80 oleogels was significantly lower than that of commercial shortening when the temperature was not higher than 35 °C. However, the oil-binding capacity of these oleogels was almost similar to that of shortening. The crystals in the shortening and oleogels were ß' form mainly; however, the morphology of crystal aggregates in these oleogels was different from that of shortening. The textural and rheological properties of doughs prepared with the oleogels were similar, and clearly different from those of dough with commercial shortening. The breaking strengths of cookies made with oleogels were lower than that of cookies prepared with shortening. However, cookies containing BW-GMP and BW-S80 oleogels were similar in density and color to those prepared with shortening. CONCLUSION: The textural properties and color of cookies with BW-GMP and BW-S80 oleogels were very similar to those of the cookies containing commercial shortening. The BW-GMP and BW-S80 oleogels could act as alternatives to shortening in the preparation of cookies. © 2023 Society of Chemical Industry.

Fabrication and characterization of sunflower oil-in-water emulsions stabilized with sunflower stem pith cellulose nanofibril.

Sunflower stem pith (SSP), an agricultural residue, was used to isolate the main source of the SSP cellulose. Cellulose nanofibril (CNF) with a length of about 2.0 µm and a width of approximately 26.3 nm was separated by using TEMPO oxidation from the SSP cellulose. Characterization of sunflower oil-in-water emulsions was assessed by visual inspection, emulsion index (EI), particle size, surface coverage, and rheology. The surface coverage ratio (SC) of emulsified droplets decreased from 8.8 to 0.5 with the variation of oil phase volume and SSP CNF phase content. Pickering emulsions (oil/water volume ratio was 1/9) prepared with CNF (0.5 wt%), which possessed the highest stability, and the smallest particle size. However, the high oil volume system resulted in polydispersity and larger droplet sizes. The storage modulus (G') and loss modulus (G") offered evidence for the rheological behavior of the emulsions. The findings indicated that it is feasible to stabilize oil-in-water emulsions using SSP cellulose. The integrated process is suggestive of viable methods for the industrial utilization of sunflower.

Sunflower Oil-Polyglycerol Stearate Oleogels: Alternative Deep-fat Frying Media for Onion Rings.

Sunflower oil oleogels consisting of 3% and 8% polyglycerol stearate (PGSO) were studied as an alternative frying media for onion rings. The physicochemical properties and thermo-rheological characteristics of oleogels were provided. The sensorial quality and texture profiles of onion rings fried in oleogels were compared with those fried in control sunflower oil. Free fatty acids at the end of 6 h were determined, and decreasing trend was reported in order as PGSO-8, control (sunflower) oil, and PGSO-3. The oxidation induction time for PGSO-8 was significantly lower (1.46 min) than those of the control and PGSO-3 samples following frying. Compared to the control group, the onion ring samples fried in oleogels absorbed approximately 33-37% less oil. It was thought that this reduction would help consumers to less total calorie and weight gain from the fried products. There were no negative effects of oleogel usage on the L* value, aroma, crispness/texture, and overall acceptability scores for the onion ring samples fried in the oleogels.

Loss in the Intrinsic Quality and the Antioxidant Activity of Sunflower (Helianthus annuus L.) Oil during an Industrial Refining Process.

Minor compounds in vegetable oils are of health interest due to their powerful biological antioxidant properties. In order to extend the shelf life of sunflower oil, it is generally subjected to a refining process that can affect these desirable compounds. The main purpose of this study was to determine the effect of this chemical/physical refining process on selected minor components of sunflower oil in order to establish the nutritional quality and health properties of the oil. The oxidative stability, contents of fatty acids, tocopherols, phytosterols, reducing capacity, ß-carotene, chlorophyll, and squalene were studied during six refining steps. Quantitative data showed the evolution of oil quality according to its degree of refinement. The results showed a significant decrease for all of the minor compounds analyzed, with losses in carotenoids of 98.6%, 8.5% in tocopherols, 19.5% in phytosterols and 45.0% in squalene. The highest reductions were recorded for the compounds that alter the most the visual aspects of the oil (waxes, carotenoids and chlorophylls) whereas reduction was limited for the compounds with no impact on the organoleptic quality. The losses in the compounds of health interest should be minimized by improving the refining processes and/or having a greater content of those molecules in crude oil by breeding new performing varieties.

An Edible Oil Enriched with Lycopene from Pink Guava (Psidium guajava L.) Using Different Mechanical Treatments.

According to the regulations of the United States Food and Drug Administration (FDA), organic solvents should be limited in pharmaceutical and food products due to their inherent toxicity. For this reason, this short paper proposes different mechanical treatments to extract lycopene without organic solvents to produce an edible sunflower oil (SFO) enriched with lycopene from fresh pink guavas (Psidium guajava L.) (FPGs). The methodology involves the use of SFO and a combination of mechanical treatments: a waring blender (WB), WB+ high-shear mixing (HSM) and WB+ ultrafine friction grinding (UFFG). The solid:solvent (FPG:SFO) ratios used in all the techniques were 1:5, 1:10 and 1:20. The results from optical microscopy and UV-vis spectroscopy showed a correlation between the concentration of lycopene in SFO, vegetable tissue diameters and FPG:SFO ratio. The highest lycopene concentration, 18.215 ± 1.834 mg/g FPG, was achieved in WB + UFFG with an FPG:SFO ratio of 1:20. The yield of this treatment was 66% in comparison to the conventional extraction method. The maximal lycopene concentration achieved in this work was significantly higher than the values reported by other authors, using high-pressure homogenization for tomato peel and several solvents such as water, SFO, ethyl lactate and acetone.

Immobilization of Eversa Lipases on Hydrophobic Supports for Ethanolysis of Sunflower Oil Solvent-Free.

Lipases are an important group of biocatalysts for many industrial applications. Two new commercial low-cost lipases Eversa® Transform and Eversa® Transform 2.0 was immobilized on four different hydrophobic supports: Lewatit-DVB, Purolite-DVB, Sepabeads-C18, and Purolite-C18. The performance of immobilized lipases was investigated in the transesterification of sunflower oil solvent-free in an anhydrous medium. Interesting results were obtained for both lipases and the four supports, but with Sepabeads support the lipases Eversa showed high catalytic activity. However, the more stable and efficient derivative was Eversa® Transform immobilized on Sepabeads C-18. A 98 wt% of ethyl ester of fatty acid (FAEE) was obtained, in 3 h at 40ºC, ethanol/sunflower oil molar ratio of 3:1 and a 10 wt% of the immobilized biocatalyst. After 6 reaction cycles, the immobilized biocatalyst preserved 70 wt% of activity. Both lipases immobilized in Sepabeads C-18 were highly active and stable in the presence of ethanol. The immobilization of Eversa Transform and Eversa Transform 2.0 in hydrophobic supports described in this study appears to be a promising alternative to the immobilization and application of these news lipases still unexplored.

Longitudinal relaxation in fat-water mixtures and its dependence on fat content at 3 T.

Longitudinal (T1 ) relaxation of triglyceride molecules and water is of interest for fat-water separation and fat quantification. A better understanding of T1 relaxation could benefit modeling for applications in fat quantification and relaxation mapping. This work investigated T1 relaxation of spectral resonances of triglyceride molecules and water in liquid fat-water mixtures and its dependence on the fat fraction. Dairy cream and a safflower oil emulsion were used. These were diluted with distilled water to produce a variety of fat mass fractions (4.4% to 35% in dairy cream and 6.3% to 52.3% in safflower oil emulsion). T1 was measured at room temperature at 3 T using an inversion recovery STimulated Echo Acquisition Mode (STEAM) MR spectroscopy method with a series of inversion times. T1 variations as a function of fat fraction were investigated for various resonances. A two-component model was developed to describe the relaxation in a fat-water mixture as a function of the fat fraction. The T1 of water and of all fat resonances studied in this work decreased as the fat fraction increased. The relative variation in T1 was different for each fat resonance. The T1 of the methylene resonance showed the least variation as a function of the fat fraction. The proposed two-component model closely fits the observed T1 variations. In conclusion, this work clarifies how the T1 of major and minor fat resonances and of the water resonance varies as a function of the fat fraction in fat-water mixtures. Knowledge of these variations could serve modeling, analysis of MRI measurements in fat-water mixtures, and phantom preparation.

Gelation and foaming properties of fatty acid mixtures in sunflower oil.

BACKGROUND: The development of lipid-lowering products has become the focus of the food industry due to increasing consumer awareness of the relationship between diet and health. Recently, edible oleofoams have drawn attention due to their enormous potential in reformulating food products with reduced fat content and unique mouth feel. RESULTS: We have developed an edible oleofoam system by whipping oleogel composed of fatty acid mixtures in sunflower oil. The crystal morphology, gelation properties, and foaming properties of these oleogels could be tailored by changing the ratio of stearic acid (SA) and myristic acid (MA). Specifically, SA/MA = 2:8 (2S8M) was demonstrated to have superior foaming capability and foam stability, likely due to the densely packed and uniformly distributed crystals formed at this fatty acid ratio. Small lipid crystals in 2S8M absorbed to the air-oil interface more efficiently, and together with the strengthened network established in the bulk phase, helped stabilize the foam structure. As a result, the 2S8M oleofoam showed excellent foaming properties: strong plasticity, significantly increased overrun (up to 63.56 ± 2.58%), and significantly improved foam stability. The X-ray diffraction (XRD) results indicated that the diffraction pattern observed for 2S8M samples at d-spacing of 4.20 and 3.79 Å was related to the characteristic peak of ß' type crystals, which were responsible for the enhanced foaming capability of 2S8M oleogels. Oleophobic property of 2S8M increased, as indicated by wettability in oil phase, which could possibly drive crystals to the air-oil interface. CONCLUSIONS: These results highlighted the importance of lipid crystal morphology in determining the whippability of oleogels. © 2021 Society of Chemical Industry.

An Intricate Review on Nutritional and Analytical Profiling of Coconut, Flaxseed, Olive, and Sunflower Oil Blends.

Vegetable oils (VOs), being our major dietary fat source, play a vital role in nourishment. Different VOs have highly contrasting fatty acid (FA) profiles and hence possess varying levels of health protectiveness. Consumption of a single VO cannot meet the recommended allowances of various FA either from saturated FA (SFA), monounsaturated FA (MUFA), polyunsaturated FA (PUFA), Ω-3 PUFAs, and medium-chain triglycerides (MCTs). Coconut oil (CO), flaxseed oil (FO), olive oil (OO), and sunflower oil (SFO) are among the top listed contrast VOs that are highly appreciated based on their rich contents of SFAs, Ω-3 PUFAs, MUFAs, and Ω-6 PUFA, respectively. Besides being protective against various disease biomarkers, these contrasting VOs are still inappropriate when consumed alone in 100% of daily fat recommendations. This review compiles the available data on blending of such contrasting VOs into single tailored blended oil (BO) with suitable FA composition to meet the recommended levels of SFA, MUFA, PUFA, MCTs, and Ω-3 to Ω-6 PUFA ratios which could ultimately serve as a cost-effective dietary intervention towards the health protectiveness and improvement of the whole population in general. The blending of any two or more VOs from CO, FO, OO, and SFO in the form of binary, ternary, or another type of blending was found to be very conclusive towards balancing FA composition; enhancing physiochemical and stability properties; and promising the therapeutic protectiveness of the resultant BOs.

Rapid Assessment of Quality Changes in French Fries during Deep-frying Based on FTIR Spectroscopy Combined with Artificial Neural Network.

Fourier transform infrared (FTIR) spectroscopy combined with backpropagation artificial neural network (BP-ANN) were utilized for rapid and simultaneous assessment of the lipid oxidation indices in French fries. The conventional indexes (i.e. total polar compounds, oxidized triacylglycerol polymerized products, oxidized triacylglycerol monomers, triacylglycerol hydrolysis products, and acid value), and FTIR absorbance intensity in French fries were determined during the deep-frying process, and the results showed the French fries had better quality in palm oil, followed by sunflower oil, rapeseed oil and soybean oil. The FTIR spectra of oil extracted from French fries were correlated to the reference oxidation indexes determined by AOCS standard methods. The results of BP-ANN prediction showed that the model based on FTIR fitted well (R2 > 0.926, RMSEC < 0.481) compared with partial least-squares model (R2 > 0.876). This facile strategy with excellent performance has great potential for rapid characterization quality of French fries during frying.

Preparation of Conjugated Linoleic Acid by Ultrasound-assisted Nanonickel Catalyst Isomerization of Sunflower Oil.

A homemade nanonickel catalyst was made by the ultrasonic liquid-phase reduction method, characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy, and applied to the isomerization reaction of high linoleic acid sunflower oil. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and particle size analysis showed that the homemade nickel particles were spherical, uniformly dispersed, less agglomerated, 20 to 75 nm in size, and nanoscale nickel powder. Compared with commercially available Raney nickel, the homemade nanonickel powder has a larger specific surface area, smaller pore size and higher catalytic activity. The X-ray diffraction spectrum of the homemade nanonickel powder had distinct diffraction peaks at its characteristic peaks which indicated that the powder was pure nickel. The nanometal nickel particles are fully dispersed in high oleic sunflower oil under the action of ultrasound. The results showed that it could effectively reduce the activation reaction time of nanonickel, and the conversion rate of conjugated linoleic acid could reach 86.24%. The process of activating the catalyst is omitted, the number of times of repeated uses of the nanonickel catalyst is increased, and the environmental pollution of the production is avoided. To obtain sunflower oil rich in CLA, it also provides a new idea for the preparation of conjugated linoleic acid.

Differential and shared effects of eicosapentaenoic acid and docosahexaenoic acid on serum metabolome in subjects with chronic inflammation.

The omega-3 fatty acids eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) affect cell function and metabolism, but the differential effects of EPA and DHA are not known. In a randomized, controlled, double-blind, crossover study, we assessed the effects of 10-week supplementation with EPA-only and DHA-only (3 g/d), relative to a 4-week lead-in phase of high oleic acid sunflower oil (3 g/day, defined as baseline), on fasting serum metabolites in 21 subjects (9 men and 12 post-menopausal women) with chronic inflammation and some characteristics of metabolic syndrome. Relative to baseline, EPA significantly lowered the tricarboxylic acid (TCA) cycle intermediates fumarate and α-ketoglutarate and increased glucuronate, UDP-glucuronate, and non-esterified DHA. DHA significantly lowered the TCA cycle intermediates pyruvate, citrate, isocitrate, fumarate, α-ketoglutarate, and malate, and increased succinate and glucuronate. Pathway analysis showed that both EPA and DHA significantly affected the TCA cycle, the interconversion of pentose and glucuronate, and alanine, and aspartate and glutamate pathways (FDR < 0.05) and that DHA had a significantly greater effect on the TCA cycle than EPA. Our results indicate that EPA and DHA exhibit both common and differential effects on cell metabolism in subjects with chronic inflammation and some key aspects of metabolic syndrome.

Gelation behavior and crystal network of natural waxes and corresponding binary blends in high-oleic sunflower oil.

Wax-based oleogels attract considerable attention for their perfect gelation properties, but the waxy mouthfeel severely limits their implementation in food. Herein, we developed a novel strategy via designing the crystal network to produce wax-based oleogels with a suitable mouthfeel. Four natural waxes with different melting points were selected as oleogelators to investigate the gelation behavior. All waxes at 5 wt% concentrations could form stable oleogels with low-frequency dependence. Especially, rice bran wax (RBW) and beeswax (BW) with high oil-binding capacity indicated that the ordered crystal network with fiber or needle-like morphology is more suitable for trapping liquid oil. Interestingly, China lacquer wax (ZLW) presented satisfactory oral melting characteristics according to the melting properties. Subsequently, to enhance the structure of ZLW-oleogel, RBW and BW with desirable crystal networks were added at varying mass ratios (100:0, 75:25, 50:50, 25:75, and 0:100). The binary oleogels exhibited monotectic behavior from thermodynamic phase diagrams. The polarization microscope indicated that similar needle-like crystals in BW/ZLW system enhanced the order of network structure, while long fiber-like crystals by RBW dominated the crystallization of RBW/ZLW binary oleogels. Finally, the BW/ZLW binary oleogels with ratios of 25:75 and 50:50 showed no-waxy mouthfeels in sensory analysis. These findings provide strong theoretical support for the application of wax-based oleogels in plastic fats replacement. PRACTICAL APPLICATION: Natural wax-based oleogel has been widely investigated due to the high oil binding capacity and perfect gelation properties. But its waxy mouthfeel severely limits the application in the food industry. In this study, oleogels with no-waxy an mouthfeel were obtained by designing wax-blend crystalline network. These findings provide strong theoretical support for the application of wax-based oleogels in plastic fats replacement.

Active Barrier Coating for Packaging Paper with Controlled Release of Sunflower Oils.

The use of paper as a sustainable packaging material is favored, but it lacks sufficient barrier properties in terms of water repellence and oil resistance. Novel approaches consider active packaging materials or coatings with controlled release providing additional functionality for delivery of specific components to the surface. In this study, the development of a waterborne coating with organic nanoparticles and encapsulated sunflower oils is presented as a system for thermal release of the oil and on-demand tuning of the final barrier properties of the paper substrate. After synthesis of the nanoparticles, it seems that the encapsulation of various grades of sunflower oil (i.e., either poly-unsaturated or mono-unsaturated) strongly affects the encapsulation efficiency and thermal release profiles. The water contact angles are controlled by the oil release and chemical surface composition of the coating upon thermal heating. The oil resistance of the paper improves as a more continuous oil film is formed during thermal release. In particular, the chemical surface composition of the paper coatings is detailed by means of micro-Raman spectroscopy and surface imaging, which provide an analytical quantification tool to evaluate surface coverage, oil delivery, and variations in organic coating moieties.