Assessment and monitoring of leather effluent discharge from Dewas and Ranipet and their computational approach.

The swift pace of industrialization, urbanization, and burgeoning populations propel the surge in demand for manufactured goods and infrastructure. The wastewater produced during leather processing comprises a cocktail of organic and inorganic chemical contaminants that have the potential to affect the environment. This study focuses on conducting a comparative physico-chemical, analytical, in vitro, and in silico toxicity assessment and monitoring of leather effluent discharged from two different areas, namely, Dewas and Ranipet. The physicochemical analysis of collected effluents revealed higher levels of biochemical oxygen demand, chemical oxygen demand, total dissolved solids, total suspended solids, and heavy metals than the permissible limit fixed by the Central Pollution Control Board (CPCB). The X-ray powder diffraction analysis of both samples identified the existence of crystalline and amorphous phases. The functional composition of compounds was identified through the analysis of Fourier-Transform Infrared Spectroscopy, which revealed the existence of C-H, O-H, N-H, C = O, C=C, and C≡C stretching vibrations. A variety of compound derivatives, including amines, organic acids, organometallic compounds, alcohols, hydrocarbons, esters, aldehydes, ketones, aromatic, and organogermanium, were identified by Gas Chromatography-Mass Spectrometry. An assessment and monitoring of the phytotoxicity of effluent on the germination of Vigna radiata seeds reveals that (100%) of both Dewas and Ranipet leather effluents inhibited seed germination by 33.34% and 100%. The incorporation of Absorption-Distribution-Metabolism-Excretion-Toxicity (ADMET) analysis improved comprehension of the toxicity profiles of the GC-MS-identified compounds. Moreover, the result of docking studies revealed that cytochrome P450 showed the highest binding affinity towards 1,3-benzodioxol-2-one, hexahydro-cis with an affinity score of - 7.1 kcal/mol. The overall research revealed that the leather effluents from Dewas and Ranipet exhibit significant toxicity, highlighting the necessity of better wastewater management. In the future, innovative treatment methods and environmental friendly processes can be developed to minimize the detrimental effects of leather effluents.

Impact of untreated tannery wastewater in the evolution of multidrug-resistant bacteria in Bangladesh.

The tannery industry produces one of the worst contaminants, and unsafe disposal in nearby waterbodies and landfills has become an imminent threat to public health, especially when the resulting multidrug-resistant bacteria and heavy metals enter community settings and animal food chains. In this study, we have collected 10 tannery wastewater (TWW) samples and 10 additional non-tannery wastewater (NTW) samples to compare the chemical oxygen demand (COD), pH, biological oxygen demand (BOD), dissolved oxygen (DO), total dissolved solids (TDS), chromium concentration, bacterial load, and antibiotic resistance profiles. While COD, pH, and chromium concentration data were previously published from our lab, this part of the study uncovers that TWW samples had a significantly higher bacterial load, compared to the non-tannery wastewater samples (5.89 × 104 and 9.38 × 103 cfu/mL, respectively), higher BOD and TDS values, and significantly lower DO values. The results showed that 53.4, 46.7, 40.0, and 40.0% of the TWW isolates were resistant to ceftriaxone, erythromycin, nalidixic acid, and azithromycin, respectively. On the other hand, 20.0, 30.0, 50.0, and 40.0% of the NTW isolates were resistant to the same antibiotics, respectively. These findings suggest that the TWW isolates were more resistant to antibiotics than the NTW isolates. Moreover, the TWW isolates exhibited higher multidrug resistance than the NTW isolates, 33.33, and 20.00%, respectively. Furthermore, spearman correlation analysis depicts that there is a negative correlation between BOD and bacterial load up to a certain level (r = - 0.7749, p = 0.0085). In addition, there is also a consistent negative correlation between COD and bacterial load (r = - 0.7112, p = 0.0252) and TDS and bacterial load (r = - 0.7621, p = 0.0104). These findings suggest that TWW could pose a significant risk to public health and the environment and highlight the importance of proper wastewater treatment in tannery industries.

Performance and mechanisms of constructed wetland integrated microbial fuel cell for remediation and detoxification of leather tannery wastewater.

Several previous studies concerned of microbial fuel cells integrated into constructed wetlands, nevertheless, their application as a convenient treatment for wastewater is still developing. In this experimental investigation, five CW-MFC systems were similarly designed, setup, and operated in a batch mode for two subsequent cycles. Each cycle lasted for 10 days to evaluate the performance of CW-MFC system for the remediation of real leather tannery wastewater (LTW). Four CW-MFCs were planted, each with different type of vegetation including Conocarpus, Arundo donax, Canna lily, and Cyperus papyrus in CW1-MFC, CW2-MFC, CW3-MFC, and CW4-MFC, respectively. The fifth CW5-MFC was maintained unplanted and considered as the control system. The performance of each CW-MFCs systems was evaluated mainly based on the removal of organic content (COD), total dissolved solid (TDS) elimination, and power generation. The results demonstrated that the four types of plants maintained healthy and no sign of wilting was observed during the 20 days of monitoring. For the first cycle of batch operation, maximum removal efficiencies of COD were 99.8%, 99.5%, 99.7%, 99.6% and 99.5% with power outputs of 10,502.8, 10,254.6, 9956.4, 10,029.6, and 9888.0 mW/m3, while, maximum TDS elimination were 46.7%, 39.7%, 60.8%, 55.5%, and 13.8% observed in CW1-MFC, CW2-MFC, CW3-MFC, CW4-MFC, and CW5-MFC, respectively. Very comparable results were observed in the second operation cycle. Results of phototoxicity test indicated that the germination of Hordeum vulgare and Triticum aestivum were 100% watered with treated effluent compared to 90% accomplished with tap water as the control solution for both types of seeds.

Functional genomics and taxonomic insights into heavy metal tolerant novel bacterium Brevibacterium metallidurans sp. nov. NCCP-602T isolated from tannery effluent in Pakistan.

The strain designated NCCP-602T was isolated from tannery effluent, and displayed aerobic, gram-positive, rod-shaped cells that were characterized by oxidase negative, catalase positive, and non-motile features. The most favourable growth conditions were observed at a temperature of 30°C, pH 7.0, and NaCl concentration of 1% (w/v). It tolerated heavy metals at high concentrations of chromium (3600 ppm), copper (3300 ppm), cadmium (3000 ppm), arsenic (1200 ppm) and lead (1500 ppm). The results of phylogenetic analysis, derived from sequences of the 16S rRNA gene, indicated the position of strain NCCP-602T within genus Brevibacterium and showed that it was closely related to Brevibacterium ammoniilyticum JCM 17537T. Strain NCCP-602 T formed a robust branch that was clearly separate from closely related taxa. A comparison of 16S rRNA gene sequence similarity and dDDH values between the closely related type strains and strain NCCP-602T provided additional evidence supporting the classification of strain NCCP-602T as a distinct novel genospecies. The polar lipid profile included diphosphatidylglycerol, glycolipid, phospholipids and amino lipids. MK-7 and MK-8 were found as the respiratory quinones, while anteiso-C15:0, iso-C15:0, iso-C16:0, iso-C17:0, and anteiso-C17:0 were identified as the predominant cellular fatty acids (> 10%). Considering the convergence of phylogenetic, phenotypic, chemotaxonomic, and genotypic traits, it is suggested that strain NCCP-602 T be classified as a distinct species Brevibacterium metallidurans sp. nov. within genus Brevibacterium with type strain NCCP-602T (JCM 18882T = CGMCC1.62055T).

Isolation and characterization of mercury and multidrug-resistant Citrobacter freundii strains from tannery effluents in Kolkata, India.

Mercury (Hg) is one of the most potent toxic heavy metals that distresses livestock, humans, and ecological health. Owing to uncontrolled exposure to untreated tannery industrial effluents, metals such as Hg are increasing in nature and are, therefore, becoming a global concern. As a result, understanding the thriving microflora in that severe condition and their characteristics becomes immensely important. During the course of this study, two Hg-resistant bacteria were isolated from tannery wastewater effluents from leather factories in Kolkata, India, which were able to tolerate 2.211 × 10- 3 M (600 µg/ml) Hg. 16 S rDNA analysis revealed strong sequence homology with Citrobacter freundii, were named as BNC22A and BNC22C for this study. In addition they showed high tolerance to nickel (Ni) and Chromium (Cr) at 6.31 × 10- 3 M (1500 µg/ml) and 6.792 × 10- 3 M (2000 µg/ml) respectively. However, both the isolates were sensitive to arsenic (As) and cadmium (Cd). Furthermore, their antibiotic sensitivity profiles reveal a concerning trend towards resistance to multiple drugs. Overuse and misuse of antibiotics in healthcare systems and agriculture has been identified as two of the main reasons for the decline in efficacy of antibiotics. Though their ability to produce lipase makes them industrially potent organisms, their competence to resist several antibiotics and metals that are toxic makes this study immensely relevant. In addition, their ability to negate heavy metal toxicity makes them potential candidates for bioremediation. Finally, the green mung bean seed germination test showed a significant favourable effect of BNC22A and BNC22C against Hg-stimulated toxicity.

One-step approach to fabricating amphoteric polymer fatliquors for chrome-free tanned leather eco-manufacturing.

The leather manufacturing industry is increasingly embracing chrome-free tanning methods to promote environmental sustainability. However, the transition to chrome-free tanning systems presents a notable obstacle: the incompatibility of traditional anionic wet finishing materials with chrome-free tanned leather due to differences in surface electrical behavior. Herein, an amphoteric polymer, referred to P(AA-co-DMAEMA-co-DA), was synthesized through a simple one-step free radical copolymerization using acrylic acid (AA), dimethylaminoethyl methacrylate (DMAEMA), and dodecyl acrylate (DA). Notably, the isoelectric point of P(AA-co-DMAEMA-co-DA) is 7.7, which contributes to improving the leather's positive electric property and enhancing the binding between the amphoteric polymer fatliquors (APF) and collagen fiber. The APF achieves a remarkable absorption rate of 96.2% and a dyeing uptake rate of 94.3% for anionic dyes, resulting in a uniformly bright surface color of the dyed leather and further significantly reducing the dye usage. Overall, the comprehensive properties of APF align with the electrical origins of organic chrome-free tanning leather, exhibiting a pronounced fatliquoring effect while reducing the dye content in the waste liquor. This contribution holds promise for advancing chrome-free tanning technology toward greener environmental practices.

Efficient electrochemical advanced degradation of Red CL and Red WB dyes from the tanning industry using a boron-doped diamond anode.

Electrochemical oxidation (EO), electro-Fenton (EF), and photoelectro-Fenton (PEF) with a BDD anode have been comparatively assessed to remediate solutions of Red CL and/or Red WB azo dyes from real raw water. For the EO process in 50 mM Na2SO4 at pH 3.0, the main oxidant was the heterogeneous •OH generated at the anode, whereas in EF and PEF, the cathodic production of H2O2 and the addition of 0.50 mM Fe2+ catalyst additionally originated homogeneous •OH that enhanced the oxidation of organics. In PEF, the solution was illuminated with a 6 W UVA light. An almost total discoloration was always found operating with a 1:1 mixture of 200 mg L-1 of both dyes in 60 min, whose efficiency increased in the order of EO < EF < PEF. The HPLC analysis of the dye mixture treated by PEF disclosed that its degradation process agreed with its discoloration. A high 74% of COD was reduced due to the oxidative action of hydroxyl radicals and the photolysis of final Fe(III)-carboxylate species with UVA irradiation. The process was accompanied by an energy consumption of 0.76 kWh (g COD)-1, a value similar to the energy consumed by the applied UVA light.

Tanning wastewater restructured nitrogen-transforming bacteria communities and promoted N2O emissions in receiving river riparian sediments.

Physicochemical and toxicological characterization of leather tanning wastewater has been widely documented. However, few reports have examined the response of denitrification N2 and N2O emissions in riparian sediments of tannery wastewater-receiving rivers. In this study, 15N-nitrate labeling was used to reveal the effects of tanning wastewater on denitrification N2 and N2O emission in a wastewater-receiving river (the old Mang River, OMR). OMR riparian sediments were highly polluted with total organic carbon (93.39 mg/kg), total nitrogen (5.00 g/kg) and heavy metals; specifically, Cr, Zn, Cd, and Pb were found at concentrations 47.3, 5.8, 1.6, 4.3, and 2.8 times that in a nearby parallel river without tanning wastewater input (the new Mang River, NMR), respectively. The denitrification N2 emission rates (0.0015 nmol N · g-1 h-1) of OMR riparian sediments were significantly reduced by 2.5 times compared with those from the NMR (p < 0.05), but the N2O emission rates (0.31 nmol N · g-1 h-1) were significantly increased (4.1 times, p < 0.05). Although the dominant nitrogen-transforming bacteria phylum was Proteobacteria in the riparian sediments of both rivers, 11 nitrogen-transforming bacteria genera in the OMR were found to be significantly enriched; five of these were related to pollutant degradation based on linear discriminant analysis (LDA >3). The average activity of the electron transport system in the OMR was 6.3 times lower than that of the NMR (p < 0.05). Among pollution factors, heavy metal complex pollution was the dominant factor driving variations in N2O emissions, microbial community structure, and electron transport system activity. These results provide a new understanding and reference for the treatment of tanning wastewater-receiving rivers.

Discarded enoki mushroom root-derived multifunctional chrome-free chitosan-based tanning agent for eco-leathers manufacturing: Tanning-dyeing, non-acid soaking, and non-basifying.

The aim of this study was to develop new discarded enoki mushroom root-derived multifunctional chrome-free chitosan-based tanning agents that can be used for eco-leather manufacturing. In this study, oligochitosan (OCS) was prepared from chitosan extracted from the enoki mushrooms and chemically modified using reactive dye R19 and epichlorohydrin (ECH) to prepare chromium-free tanning agent (OCS-R19-ECH) with both tanning and dyeing functions. FT-IR, XRD, and NMR (1H) confirmed the successful synthesis of the product. The molecular weight of OCS-R19-ECH is 6355 g/mol, with an average particle size of 1249.37 nm and an epoxy value of 0.276 mol/100 g. OCS-R19-ECH was used for tanning experiments on bated sheepskin, and the results showed that the leather tanned with OCS-R19-ECH not only exhibited excellent wet-heat stability (shrinkage temperature = 81 °C), but also superior dyeing uniformity, resistance to dry and wet abrasion, mechanical strength (tensile strength = 12.4 MPa, tear strength = 57.3 N/mm), and outstanding antimicrobial properties. Most importantly, compared with traditional tanning agents, OCS-R19-ECH has a higher pH (9.0), tanning-dyeing integration, non-acid soaking, and non-basifying can be achieved in leather making, which can greatly simplify the tanning processes. This new multifunctional chrome-free chitosan-based tanning agent facilitates high-value utilization of waste resources.

An insight on the plausible biological and non-biological detoxification of heavy metals in tannery waste: A comprehensive review.

A key challenge for the tannery industries is the volume of tannery waste water (TWW) generated during the processing of leather, releasing various forms of toxic heavy metals resulting in uncontrolled discharge of tannery waste (TW) into the environment leading to pollution. The pollutants in TW includes heavy metals such as chromium (Cr), cadmium (Cd), lead (Pb) etc, when discharged above the permissible limit causes ill effects on humans. Therefore, several researchers have reported the application of biological and non-biological methods for the removal of pollutants in TW. This review provides insights on the global scenario of tannery industries and the harmful effects of heavy metal generated by tannery industry on micro and macroorganisms of the various ecological niches. It also provides information on the process, advantages and disadvantages of non-biological methods such as electrochemical oxidation, advanced oxidation processes, photon assisted catalytic remediation, adsorption and membrane technology. The various biological methods emphasised includes strategies such as constructed wetland, vermitechnology, phytoremediation, bioaugmentation, quorum sensing and biofilm in the remediation of heavy metals from tannery wastewater (TWW) with special emphasize on chromium.

Nano-selenium and compost vitalized morpho-physio-biochemical, antioxidants and osmolytes adjustment in soybean under tannery effluent polluted soil.

The aim of this work was to investigate the impact of nano selenium (N-Se) and compost on the growth, photosynthesis, enzymes activity, compatible solutes and metals accumulation in soybean grown under tannery effluent polluted soil. The plants were exposed to compost application (no compost and compost addition) and foliar application of N-Se (0, 25, 50, and 75 mg L-1). The results showed the addition of compost in soil and foliar applied N-Se alleviated the toxic effect of tannery effluent polluted soil. Furthermore, foliar application of N-Se with basal compost supply significantly improved antoxidant enzymes activity in soybean grown in tannery effluent polluted soil. Addition of compost increased the root dry weight (46.43%) and shoot dry weight (33.50 %), relative water contents by (13.74 %), soluble sugars (15.99 %), stomatal conductance (gs) (83.33 %), intercellular CO2 concentration (Ci) (23.34 %), transpiration rate (E) (12.10 %) and decreased the electrolyte leakage (27.96 %) and proline contents by (20.34 %). The foliage application of N-Se at the rate of 75 mg L-1 showed the most promising results in control and compost amended tannery effluent polluted soil. The determined health risk index (HRI) values were recorded less than 1 for both adults and children under the application of compost and N-Se. In summary, the combined use of N-Se at 75 mg L⁻1 and basal supply of compost is an effective strategy for enhancing soybean productivity while minimizing the potential risks of metal accumulation in soybean grains grown in tannery effluent polluted soil.

Tannery effluent treatments with mangrove fungi, grass root biomass, and biochar.

Tannery effluents contain high amounts of polluting chemicals, such as salts and heavy metals released often to surface waters. New economic and eco-friendly purification methods are needed. Two adsorbing materials and five salt-tolerant fungal isolates from mangrove habitat were studied. Purification experiments were carried out using the pollutant adsorbents biochar and the biomass of vetiver grass (Chrysopogon zizanioides) roots and the fungi Cladosporium cladosporioides, Phomopsis glabrae, Aspergillus niger, Emericellopsis sp., and Scopulariopsis sp., which were isolated from mangrove sediment. They efficacy to reduce pollutants was studied in different combinations. Salinity, turbidity, total dissolved solids, total suspended solids, phenols, nitrogen, ammonia. Biological and chemical oxygen demand (BOD, COD) and several heavy metals were measured. The adsorbents were efficient reducing the pollutants to 15-50% of the original. The efficiency of the combination of biochar and roots was generally at the same level as the adsorbents alone. Some pollutants such as turbidity, COD and ammonium were reduced slightly more by the combination than the adsorbents alone. From all 14 treatments, Emericellopsis sp. with biochar and roots appeared to be the most efficient reducing pollutants to < 10-30%. BOD and COD were reduced to ca 5% of the original. The treatment was efficient in reducing also heavy metals (As, Cd, Cr, Mn Pb, Zn). The fungal species originating from the environment instead of the strains present in the tannery effluent reduced pollutants remarkably and the adsorbents improved the reduction efficiency. However, the method needs development for effluents with high pollutant concentrations to fulfil the environmental regulations.

Phenotypic characterization for bioremediation suitability of isolates from Southern Tunisian tannery effluent.

Effluents from the leather tanning industry contain diverse pollutants, including hazardous heavy metals, posing threats to public health and the surrounding environment. Indigenous bacterial isolates can represent an eco-friendly approach for tannery wastewater treatment; however, phenotypic characterization is necessary to determine whether these strains are suitable for bioremediation. In the present study, we analyzed seven new Enterococcus faecium strains and two new Bacillus subtillis strains isolated from effluents from the Southern Tunisian Tannery (ESTT). We evaluated phenotypic features beneficial for bioremediation, including biofilm formation, hydrophobicity, and exoenzyme activities. Additionally, we examined characteristics naturally occurring in environmental bacteria but less desirable in strains selected for bioremediation, such as antibiotic resistances and pathogenicity indicators. The observed phenotypes were then compared with whole-genome analysis. We observed biofilm production in two slime-producing bacteria, B. licheniformis RLT6, and E. faecium RLT8. Hydrophobicity of E. faecium strains RLT1, RLT5, RLT8, and RLT9, as well as B. licheniformis RLT6 correlated positively with increasing ESTT concentration. Exoenzyme activities were detected in E. faecium strains RLT2, RLT4, and RLT7, as well as B. licheniformis RLT6. As anticipated, all strains exhibited common resistances to antibiotics and hemolysis, which are widespread in nature and do not hinder their application for bioremediation. Importantly, none of the strains exhibited the pathogenic hypermucoviscosity phenotype. To the best of our knowledge, this is the first report consolidating all these phenotypic characteristics concurrently, providing a complete overview of strains suitability for bioremediation. IMPORTANCE: The study evaluates the bioremediation potential of seven Enterococcus faecium strains and two Bacillus subtillis strains isolated from the effluents from the Southern Tunisian tannery (ESTT), which pose threats to public health and environmental integrity. The analysis primarily examines the phenotypic traits crucial to bioremediation, including biofilm formation, hydrophobicity, and exoenzyme activities, as well as characteristics naturally occurring in environmental bacteria related to heavy metal resistance, such as antibiotic resistances. Several strains were found to have high bioremediation potential and exhibit only antibiotic resistances commonly found in nature, ensuring their application for bioremediation remains uncompromised. The results of the exhaustive phenotypic analysis are contrasted with the whole genome sequences of the nine strains, underscoring the appropriateness of these bacterial strains for eco-friendly interventions in tannery wastewater treatment.

Mechanistic approach of tannery wastewater and sulfadiazine mutual toxicity in wheat (Triticum aestivum L.) and mitigation through exogenous application of gallic acid.

Excessive release of chromium (Cr) from the tanning industry and antibiotics from livestock caused severe hazards to humans. Gallic acid (GA 10 mM) alleviated alone/combined SDZ 30 mg kg-1 and TWW 40, 60, and 100% stress in wheat. GA (10 mM) decreased the TSP 12 and 13%, TFAA 8 and 10%, TSS 14 and 16%, RS 18 and 16%, and NRS 11 and 9% in shoots and grains under SDZ + TWW (30 mg kg-1+100%), compared without foliar. GA (10 mM) declined the MDA 20 and 31, EL 13 and 36%, H2O2 17 and 15%, O2•- 10 and 11% in leaves and roots, under combined SDZ + TWW (30 mg kg-1+100%), compared without foliar. GA (10 mM) improved the POD 106 and 30%, SOD 145 and 31%, CAT 78, and 35%, APX 100 and 25% in leaves and roots under combined SDZ + TWW (30 mg kg-1+100%), compared without foliar application. Considerably GA (10 mM) reduced total Cr 18, CrIII 20, and CrVI 50% in roots and shoots 19, 41, and 48%, and grains 15, 27, and 29% respectively, under combined SDZ + TWW (30 mg kg-1+100%) stress, compared without foliar. Overall, GA boosted the wheat growth, physiology, and defence system by inhibiting the combined SDZ + Cr toxicity.

Evaluating the efficacy of vermicomposted products in rain-fed wetland rice and predicting potential hazards from metal-contaminated tannery sludge using novel machine learning tactic.

The study assessed the ecotoxicity and bioavailability of potential metals (PMs) from tannery waste sludge, alongside addressing the environmental concerns of overuse of chemical fertilizers, by comparing the impacts of organic vermicomposted tannery waste, chemical fertilizers, and sole application of tannery waste on soil and rice (Oryza sativa L.) plants. The results revealed that T3, which received high-quality vermicomposted tannery waste as an amendment, exhibited superior enzymatic characteristics compared to tannery sludge amended (TWS) treatments (T8, T9). After harvesting, vermicomposted tannery waste treatment (T3) showed a more significant decrease in PMs bioavailability. Accumulation of PMs in rice was minimal across all treatments except T8 and T9, where toxic tannery waste was present, resulting in a high-risk classification (class 5 < 0.01) according to the SAMOE risk assessment. Results from Fuzzy-TOPSIS, ANN, and Sobol sensitivity analyses (SSA) further indicated that elevated concentrations of PMs (Ni, Pb, Cr, Cu) adversely impacted soil-plant health synergy, with T3 showing a minimal risk in comparison to T8 and T9. According to SSA, microbial biomass carbon and acid phosphatase activity were the most sensitive factors affected by PMs concentrations in TWS. The results from the ANN assay revealed that the primary contributing factor of toxicity on the TWS was the exchangeable fraction of Cr. Correlation statistics underscored the significant detrimental effect of PMs' bioavailability on microbial and enzymatic parameters. Overall, the findings suggest that vermicomposting of tannery sludge waste shows potential as a viable organic amendment option in the near future.

Risk assessment of four toxic heavy metals in terrestrial and aquatic ecosystems around BSCIC tannery industrial estate of Savar, Dhaka, Bangladesh.

The shifting of tannery industries from Hazaribagh to Savar adjacent to Dhaleshwari River might have inevitable adverse impacts, especially the heavy metal contamination of both terrestrial and aquatic ecosystems. The study was carried out to investigate the concentrations of four heavy metals in the soil, water, and plant samples collected from around Dhaleshwari River adjacent to the Bangladesh Small & Cottage Industries Corporation Tannery Industrial Estate, Dhaka. This study revealed that average concentrations of cadmium and chromium in soil exceeded the maximum permissible limit of World Health Organization (1996) and average concentrations of lead, cadmium, and chromium in water exceeded the maximum permissible limit of World Health Organization (2011) and Environmental Conservation Rules (1997). The average concentrations of lead, cadmium, and chromium in the roots and shoots of both Eichhornia crassipes and Cynodon dactylon exceeded the maximum permissible limit of Food and Agriculture Organization/ World Health Organization (2016). Ecological risk assessment using indices model for soil pollution indicated that soil is mostly contaminated with cadmium and chromium which can pose strong ecological risk Health risk assessment using indices model for water pollution revealed the high degree of contamination and unacceptable non-carcinogenic risk and carcinogenic risk for adults as well as children through ingestion of water. Average bioconcentration factor and bioaccumulation factor were higher in Eichhornia crassipes than Cynodon dactylon for lead, cadmium, and chromium. Average translocation factor was also higher in Eichhornia crassipes for all the metals except cadmium. It is suggested remedial and mitigation measures be instituted to control environmental degradation of the newly established Tannery Industrial Estate.

Coupling of phycoremediation and phytoremediation technologies to treat tannery effluents with rainwater dilutions.

From tannery effluent (TE) severely polluted with heavy metals (HMs viz., Cr, Cu, Cd, and Pb), hydrophytic phytoextraction remains a challenge as transplanted plants succumb to death on facing acclimatization shock. Current study was aimed at diluting TE with harvested rainwater (HR) for improving HM phytoextraction potential of Phragmites australis (a hydrophyte) assisted with phycoremediation of coupled algae (viz., Oedogonium sp. and Pithophora sp.). The TE:HR dilutions (TEDs) 0, 25, 50, 75, and 100% (v/v) included three sets: set-1 included algae only, set-2 included P. australis only and set-3 included P. australis coupled with combined algal inoculum. Results showed that P. australis assisted with HR dilution and combined algal inoculum showed significantly greater uptake of HMs from each of the TEDs than respective control treatments. Combined algal application in the TEDs proved phycoremediation assistants based on their bioaccumulation factor (BF). The dry biomass of P. australis in TEDs applied with phycoremediation assistants remained greater than uninoculated ones. Overall, HM translocation factor (TF) of P. australis for Cr, Cu, Cd, and Pb remained ≥ 1. The study concludes that HM phytoextraction is substantially increased when concentrated TE is diluted with HR and assisted with phycoremediation of HM tolerant algae.

Sustainable leather tanning: Enhanced properties and pollution reduction through crude protease enzyme treatment.

In this study, proteolytic bacteria, particularly Pseudomonas aeruginosa strain SM4 (OQ349573), were isolated from tannery solid waste dumping yard soil and employed to produce extracellular protease enzymes. The bacteria exhibited optimal growth after 30 h of incubation at 37 °C and pH 7. Under conditions of 55 °C, pH 8, and a substrate concentration of 2 %, the crude enzyme displayed its highest activity at 105 UmL-1. Notably, the produced crude enzyme showed no discernible inhibitory effects on detergents, metal salts, or organic solvents. Application of the crude protease at concentrations of 3 % and 2 % in chrome tanning of goatskins (GS) and cowhides (CH), respectively, yielded significant reductions of 35 % and 30 % in chromium and other post-tanning chemicals compared to conventional processes. Despite the 30 to 35 % reduction in tanning and post-tanning chemicals, the uptake of chrome and associated chemicals by crust leather was higher than observed in conventional processes. Chromium content analysis of the effluent revealed an 81 % reduction during piloting in real industrial operations, accompanied by reductions of about 46 % in BOD and COD pollution loads. The finished leather obtained from the enzymatic process exhibited superior mechanical properties, including higher tensile strengths (210 and 195 kg cm-2), stitch tear (92 and 165 kg cm-1), grain crack load (28 and 32 kg), and distension (73 and 62 mm) for GS and CH, respectively, surpassing or closely aligning with standard values and those obtained in conventional processes.

New plant polyphenol-derived tannic acid-based chromium-free tanning agent for sustainable and clean leather production.

This study aimed to prepare a new bio-based chromium-free tanning agent. The green epoxide monocase ethylene glycol diglycidyl ether (EGDE) was grafted with tannic acid (TA) derived from natural plant using the one-pot method to synthesize new plant polyphenol-derived tannic acid-based chromium-free tanning agents (TA-EGDE) with abundant terminal epoxides. FTIR, 1H NMR, XPS, GPC, SEM, and other analytical techniques were used to characterize tanning agents. These consequences manifested that EGDE was successfully grafted with the phenol hydroxyl group of TA. The epoxide value of TA-EGDE showed a tendency to increase and then decrease with increasing EGDE dosage, and the epoxide value of TA-EGDE-2 attained a maximum of 0.262 mol/100 g. GPC analysis showed that the formula weight of the prepared TA-EGDE was partially distributed above 5000 Da. The tanning experiment demonstrated that the shrinkage temperatures (Ts) of the TA-EGDE-tanned leathers were all higher than 81.5 °C. Compared with the traditional commercial chromium-free tanning agent (F-90, TWS), TA-EGDE-tanned leathers exhibited higher Ts and better mechanical properties. The TA-EGDE prepared in this study not only has ecological environmental protection but also provides finished leather with good moisture, heat resistance, and mechanical properties.

Hyphenated Fenton-column packed nMnO-modified wood biochar for tannery effluent treatment: Adsorption mechanism and reusability study.

Industrial wastewater contains a wide range of pollutants that, if released directly into natural ecosystems, have the potential to pose serious risks to the environment.This study aims to investigate sustainable and efficient approaches for treating tannery wastewater, employing a combination of hyphenated Fenton oxidation and adsorption processes. Rigorous analyses were conducted on wastewater samples, evaluating parameters like COD, sulphide, NH3-N, PO43-, NO3-, and Cr(VI). The performance of this adsorbent material was gauged through column adsorption experiments. A comprehensive characterization of the adsorbent was undertaken using techniques such as SEM, EDX, BET, FTIR, XRD, and LIBS. The study delved into varying operational parameters like bed depth (ranging from 3.5 to 9.5 cm) diameter (2.5 cm) and influent flow rate (ranging from 5 to 15mLmin-1). The experimental outcomes revealed that increasing the bed depth and decreasing the influent flow rate significantly bolstered the adsorption column's effectiveness. Breakthrough curves obtained were fitted with different models, including the Thomas and Yoon-Nelson models. The most optimal column performance was achieved with a bed height of 10.5 cm and a flow rate of 5mLmin-1. The combined process achieved removal efficiencies of 94.5% for COD, 97.4% for sulphide, 96.2% for NH3-N, 83.1% for NO3-, 79.3% for PO43-, and 96.9% for Cr(VI) in tannery effluent. This research presents a notable stride toward the development of sustainable and efficient strategies for tannery wastewater treatment.