Diverse Allyl Glucosinolate Catabolites Independently Influence Root Growth and Development.

Glucosinolates (GSLs) are sulfur-containing defense metabolites produced in the Brassicales, including the model plant Arabidopsis (Arabidopsis thaliana). Previous work suggests that specific GSLs may function as signals to provide direct feedback regulation within the plant to calibrate defense and growth. These GSLs include allyl-GSL, a defense metabolite that is one of the most widespread GSLs in Brassicaceae and has also been associated with growth inhibition. Here we show that at least three separate potential catabolic products of allyl-GSL or closely related compounds affect growth and development by altering different mechanisms influencing plant development. Two of the catabolites, raphanusamic acid and 3-butenoic acid, differentially affect processes downstream of the auxin signaling cascade. Another catabolite, acrylic acid, affects meristem development by influencing the progression of the cell cycle. These independent signaling events propagated by the different catabolites enable the plant to execute a specific response that is optimal to any given environment.

Development of complementary CE-MS methods for speciation analysis of pyrithione-based antifouling agents.

In the recent decade, metal pyrithione complexes have become important biocides for antifouling purposes in shipping. The analysis of metal pyrithione complexes and their degradation products/species in environmental samples is challenging because they exhibit fast UV degradation, transmetalation, and ligand substitution and are known to be prone to spontaneous species transformation within a chromatographic system. The environmental properties of the pyrithione species, e.g., toxicity to target and non-target organisms, are differing strongly, and it is therefore inevitable to identify as well as quantify all species separately. To cope with the separation of metal pyrithione species with minimum species transformation during analysis, a capillary electrophoresis (CE)-based method was developed. The hyphenation of CE with selective electrospray ionization- and inductively coupled plasma-mass spectrometry (ESI-, ICP-MS) provided complementary molecular and elemental information for the identification and quantification of pyrithione species. To study speciation of pyrithiones, a leaching experiment of several commercial antifouling paints containing zinc pyrithione in ultrapure and river water was conducted. Only the two species pyrithione (HPT) and dipyrithione ((PT)2) were found in the leaching media, in concentrations between 0.086 and 2.4 µM (HPT) and between 0.062 and 0.59 µM ((PT)2), depending on the paint and leaching medium. The limits of detection were 20 nM (HPT) and 10 nM ((PT)2). The results show that complementary CE-MS is a suitable tool for mechanistical studies concerning species transformation (e.g., degradation) and the identification of target species of metal pyrithione complexes in real surface water matrices, laying the ground for future environmental studies. Graphical abstract Hyphenation of CE with ESI- and ICP-MS provided complementary molecular and elemental information. Metal pyrithione species released from commercial antifouling paints could be identified and quantified in ultrapure and river water matrices.

Thermodynamic study of new antiepileptic compounds by combining chromatography on the phosphatidylcholine biomimetic stationary phase and differential scanning calorimetry.

Liquid chromatography coupled to spectrophotometric detection of new antiepileptic compounds, 1,2,4-triazole-3-thione derivatives, on immobilized artificial membrane phosphatidylcholine is reported. The curves representing the relationship between ln k versus 1/T generated under isocratic conditions by the use of methanol and acetonitrile-containing eluent systems have been constructed in order to determine the thermodynamic parameters: the enthalpies, entropies and the relative free energies. The hydrocarbon chains of analytes significantly influenced the membrane behavior of the whole molecules. Excellent correlations of the theoretical lipophilicity with the experimental thermodynamic descriptors, have confirmed contribution of the hydrophobic interactions in the retention process. However, presence of sulfur or oxygen as heteroatoms at R1 substituents in the 1,2,4-triazole ring appears to be responsible for more pronounced selectivity of these compounds on the phosphatidylcholine stationary phase. Molecular dynamics simulations revealed the selective preferences of the phosphatidylcholine with respect to the compounds with either ether of sulfide moieties. Experimental and theoretical set-ups resulted in corresponding outcomes.

The influence of seawater properties on toxicity of copper pyrithione and its degradation product to brine shrimp Artemia salina.

Copper pyrithione (CuPT) is a biocide, used worldwide to prevent biofouling on submerged surfaces. In aquatic environments it rapidly degrades, however, one of the degradation products (HPT) is known to react with cupric ion back to its parent compound. Not much is known about the behavior and toxicity of CuPT and its degradation product HPT in different water systems. Hence, our aim was to investigate the ecotoxicity of CuPT, HPT as well as Cu2+ to the brine shrimp Artemia salina in natural seawater and organic matter-free artificial seawater. Moreover, in order to elucidate the influence of ionic strength of water on CuPT toxicity, tests were performed in water media with modified salinity. The results showed that CuPT was the most toxic to the exposed crustaceans in a seawater media with the highest salinity and with no organic matter content. HPT in a presence of cupric ion converted to CuPT, but the measured CuPT concentrations and the mortality of A. salina in natural water were lower than in artificial water. The toxicity of CuPT to A. salina was significantly influenced by the organic matter content, salinity, and proportions of constituent salts in water. In a combination with cupric ion, non-hazardous degradation product HPT exhibits increased toxicity due to its rapid transformation to its parent compound.

Novel Concept of Discrimination of 1,2,4-Triazole-3-thione and 3-Thiol Tautomers.

Till now, three major spectroscopic techniques, fourier transform infrared (FT-IR), nuclear magnetic resonance (NMR) spectroscopy and X-ray crystallography, have been used for determination of thiol-thione tautomeric forms. Therefore, a novel analytical concept of discrimination of 1,2,4-triazole-3-thione and 3-thiol tautomers using two high-resolution mass spectrometers has been proposed. It comprises the high-performance liquid chromatography (HPLC) hyphenated with electrospray ionization (ESI)-time-of-flight mass spectrometry (ESI-TOF-MS, positive ion mode) followed by in-source collision-induced dissociation (CID) and low-energy CID-tandem mass spectrometry (MS/MS) analysis measured with a Quadruple-TOF-MS instrument. The HPLC column was a Zorbax Stable Bond RP-18 and a rapid isocratic elution. Selected 3-thione and 3-thiol tautomers were rapidly separated, within 6 min and detected both by in-source CID ESI(+)-TOF-MS and CID ESI(+)-QTOF-MS with a high mass accuracy and high sensitivity. The method limits of detection were of 2.8-5.6 pg/µl (at S/N 3:1) for ESI-TOF-MS and 0.25-0.55 pg/µl for ESI-QTOF-MS. The tautomeric form could be easily discriminated by both methods and by the different gas-phase fragmentation patterns. Differences and similarities between in-source CID MS and CID MS/MS spectra have also been presented. These findings were also supported by recorded FT-IR spectra in solid state. The developed methodology using both the high-resolution MS systems is considerably the most sensitive among the others.

Experimental and theoretical charge-density analysis of 1,4-bis(5-hexyl-2-thienyl)butane-1,4-dione: applications of a virtual-atom model.

The experimental and theoretical charge densities of 1,4-bis(5-hexyl-2-thienyl)butane-1,4-dione, a precursor in the synthesis of thiophene-based semiconductors and organic solar cells, are presented. A dummy bond charges spherical atom model is applied besides the multipolar atom model. The results show that the dummy bond charges model is accurate enough to calculate electrostatic-derived properties which are comparable with those obtained by the multipolar atom model. The refinement statistics and the residual electron density values are found to be intermediate between the independent atom and the multipolar formalisms.

Slow, spontaneous degradation of lansoprazole, omeprazole and pantoprazole tablets: isolation and structural characterization of the toxic antioxidants 3H-benzimidazole-2-thiones.

The spontaneous degradation of lansoprazole, omeprazole and pantoprazole tablets upon long-term and forced storage conditions was determined by high performance liquid chromatography (HPLC). The more abundant products could be isolated by liquid chromatography and their molecular weights determined by Mass Spectrometry (MS). Their structures, established according to their spectroscopic data, were compared to those of either the literature or of authentic samples. Thus lansoprazole led mainly to a mixture of 3H-benzimidazole-2-thione (2a) and 3H-benzimidazole-2-one (2c), omeprazole mainly to a mixture of 5-methoxy-3H-benzimidazole-2-thione (1a) and 2-hydroxymethyl-3, 5-dimethyl-4-methoxypyridine (1b), and pantoprazole, to 5-difluoromethoxy-3H-benzimidazole-2-thione (3a) and 2-hydroxymethyl-3, 4-dimethoxypyridine (3b). Although some of the degradation products had already been observed under different conditions, the detection of benzimidazole-2-thiones is unprecedented and their involvement as possible physiological, yet toxic antioxidants must be emphasized. Plausible, unified mechanisms for the formation of the different degradation products observed herein and in previous papers from the literature are suggested.

Metal-sulfur valence orbital interaction energies in metal-dithiolene complexes: determination of charge and overlap interaction energies by comparison of core and valence ionization energy shifts.

The electronic interactions between metals and dithiolenes are important in the biological processes of many metalloenzymes as well as in diverse chemical and material applications. Of special note is the ability of the dithiolene ligand to support metal centers in multiple coordination environments and oxidation states. To better understand the nature of metal-dithiolene electronic interactions, new capabilities in gas-phase core photoelectron spectroscopy for molecules with high sublimation temperatures have been developed and applied to a series of molecules of the type Cp(2)M(bdt) (Cp = η(5)-cyclopentadienyl, M = Ti, V, Mo, and bdt = benzenedithiolato). Comparison of the gas-phase core and valence ionization energy shifts provides a unique quantitative energy measure of valence orbital overlap interactions between the metal and the sulfur orbitals that is separated from the effects of charge redistribution. The results explain the large amount of sulfur character in the redox-active orbitals and the 'leveling' of oxidation state energies in metal-dithiolene systems. The experimentally determined orbital interaction energies reveal a previously unidentified overlap interaction of the predominantly sulfur HOMO of the bdt ligand with filled π orbitals of the Cp ligands, suggesting that direct dithiolene interactions with other ligands bound to the metal could be significant for other metal-dithiolene systems in chemistry and biology.

Flow injection analysis of ethyl xanthate by gas diffusion and UV detection as CS2 for process monitoring of sulfide ore flotation.

A sensitive and robust analytical method for spectrophotometric determination of ethyl xanthate, CH(3)CH(2)OCS(2)(-) at trace concentrations in pulp solutions from froth flotation process is proposed. The analytical method is based on the decomposition of ethyl xanthate, EtX(-), with 2.0 mol L(-1) HCl generating ethanol and carbon disulfide, CS(2). A gas diffusion cell assures that only the volatile compounds diffuse through a PTFE membrane towards an acceptor stream of deionized water, thus avoiding the interferences of non-volatile compounds and suspended particles. The CS(2) is selectively detected by UV absorbance at 206 nm (epsilon=65,000 L mol(-1) cm(-1)). The measured absorbance is directly proportional to EtX(-) concentration present in the sample solutions. The Beer's law is obeyed in a 1x10(-6) to 2x10(-4) mol L(-1) concentration range of ethyl xanthate in the pulp with an excellent correlation coefficient (r=0.999) and a detection limit of 3.1x10(-7) mol L(-1), corresponding to 38 microg L(-1). At flow rates of 200 microL min(-1) of the donor stream and 100 microL min(-1) of the acceptor channel a sampling rate of 15 injections per hour could be achieved with RSD<2.3% (n=10, 300 microL injections of 1x10(-5) mol L(-1) EtX(-)). Two practical applications demonstrate the versatility of the FIA method: (i) evaluation the free EtX(-) concentration during a laboratory study of the EtX(-) adsorption capacity on pulverized sulfide ore (pyrite) and (ii) monitoring of EtX(-) at different stages (from starting load to washing effluents) of a flotation pilot plant processing a Cu-Zn sulfide ore.

Synthesis, structural characterization, and biological studies of new antimony(III) complexes with thiones. The influence of the solvent on the geometry of the complexes.

Five new antimony(III) complexes with the heterocyclic thiones 2-mercapto-benzimidazole (MBZIM), 5-ethoxy-2-mercapto-benzimidazole (EtMBZIM), and 2-mercapto-thiazolidine (MTZD) of formulas {[SbCl(2)(MBZIM)4]+.Cl-.2H(2)O. (CH(3)OH)} (1), {[SbCl(2)(MBZIM)4]+.Cl-.3H(2)O.(CH3CN)} (2), [SbCl(3)(MBZIM)2] (3), [SbCl(3)(EtMBZIM)(2)] (4), and [SbCl(3)(MTZD)2] (5) have been synthesized and characterized by elemental analysis, FT-IR, far-FT-IR, differential thermal analysis-thermogravimetry, X-ray diffraction, and conductivity measurements. Complex {[SbCl2(tHPMT)(2)]+Cl-}, (tHPMT = 2-mercapto-3,4,5,6-tetrahydro-pyrimidine), already known, was also prepared, and its X-ray crystal structure was solved. It is shown that the complex is better described as {[SbCl3(tHPMT)(2)]} (6). Crystal structures of all other complexes (1-5) have also been determined by X-ray diffraction at ambient conditions. The crystal structure of the hydrated ligand, EtMBZIM.H2O is also reported. Compound [C(28)H(24)Cl(2)N(8)S(4)Sb.2H(2)O.Cl.(CH(3)OH)] (1) crystallizes in space group P2(1), with a = 7.7398(8) A, b = 16.724(3) A, c = 13.717(2) A, beta = 98.632(11) degrees, and Z = 2. Complex [C(28)H(24)Cl(2)N(8)S(4)S(b).Cl.3H(2)O.(CH(3)CN)] (2) corresponds to space group P2(1), with a = 7.8216(8) A, b = 16.7426(17) A, c = 13.9375(16) A, beta = 99.218(10) degrees , and Z = 2. In both 1 and 2 complexes, four sulfur atoms from thione ligands and two chloride ions form an octahedral (Oh) cationic [SbS(4)Cl(2)]+ complex ion, where chlorides lie at axial positions. A third chloride counteranion neutralizes it. Complexes 1 and 2 are the first examples of antimony(III) compounds with positively charged Oh geometries. Compound [C(14)H(12)Cl(3)N(4)S(2)S(b)] (3) crystallizes in space group P, with a = 7.3034(5) A, b = 11.2277(7) A, c = 12.0172(8) A, alpha = 76.772(5) degrees, beta = 77.101(6) degrees, gamma = 87.450(5) degrees, and Z = 2. Complex [C(18)H(20)Cl(3)N(4)O(2)S(2)S(b)] (4) crystallizes in space group P1, with a = 8.6682(6) A, b = 10.6005(7) A, c = 13.0177(9) A, alpha = 84.181(6) degrees, beta = 79.358(6) degrees, gamma = 84.882(6) degrees, and Z = 2, while complex [C(6)H(10)Cl(3)N(2)S(4)S(b)] (5) in space group P2(1)/c shows a = 8.3659(10) A, b = 14.8323(19) A, c = 12.0218(13) A, beta = 99.660(12) degrees, and Z = 4 and complex [C(8)H(16)Cl(3)N(4)S(2)S(b)] (6) in space group P1 shows a = 7.4975(6) A, b = 10.3220(7) A, c = 12.1094(11) A, alpha = 71.411(7) degrees, beta = 84.244(7) degrees, gamma = 73.588(6) degrees, and Z = 2. Crystals of complexes 3-6 grown from acetonitrile solutions adopt a square-pyramidal (SP) geometry, with two sulfur atoms from thione ligands and three chloride anions around Sb(III). The equatorial plane is formed by two sulfur and two chloride atoms in complexes 3-5, in a cis-S, cis-Cl arrangement in 3 and 5 and a trans-S, trans-Cl arrangement in 4. Finally, in the case of 6, the equatorial plane is formed by three chloride ions and one sulfur from the thione ligand while the second sulfur atom takes an axial position leading to a unique SP conformation. The complexes showed a moderate cytostatic activity against tumor cell lines.

High-pressure liquid chromatographic analysis for identification of in vitro and in vivo metabolites of 4-phenethyl-5-[4-(1-(2-hydroxyethyl)-3,5-dimethyl-4-pyrazolylazo)phenyl]-2,4-dihydro-3H-1,2,4-triazole-3-thione in rats.

All azo colorants whose metabolism can liberate a carcinogenic arylamine, are suspected of having carcinogenic potential. Therefore, a new azo compound 4-phenethyl-5-[4-(1-(2-hydroxyethyl)-3,5-dimethyl-4-pyrazolylazo)phenyl]-2,4-dihydro-3H-1,2,4-triazole-3-thione (substrate) was prepared to investigate its in vitro and in vivo biotransformation in rats by HPLC. Chromatographic separation of substrate and its metabolites was performed using a Chromasil C(18) column. The mobile phase consisted of acetonitrile and water in a linear gradient system. From the biotransformation of this compound, the reduction metabolite 4-(2-phenethyl)-5-(4-aminophenyl)-2,4-dihydro-3H-1,2,4-triazole-3-thione was identified by comparing it to reference standard by HPLC-DAD. In the in vivo study, identification of the unknown peak which was the N-acetylation metabolite was confirmed by LC-MS spectrometry. Besides this, the azo compound was reduced to its corresponding amine in intestinal and cytosolic parts. In addition, oxidation of the methyl group and the phenyl ring, and reduction of azo group to hydrazo were identified in the cytosolic part using LC-MS.

log P estimation of 1,2-dithiole-3-thiones and 1,2-dithiole-3-ones: a comparison of experimental and calculative approaches.

PURPOSE: To estimate experimental log P values of formerly described 5-formyl- and 5-acyl-dithiole-3-thiones (DTT) and -dithiole-3-ones (DTO) and to check the validity of five log P calculation programs via experimental log P for a database of 68 DTT and DTO. METHODS: Experimental log P values were measured by means of octanol/water partitioning; for determining solute concentrations in water, RP-HPLC with spectrophotometric detection was used. For calculating log P, the fragmental methods ACD/log P, CLOGP, and KOWWIN, the atom-based approach XLOGP, and the whole-molecule approach QLOGP were applied. RESULTS: Quality of calculations significantly differs depending on the subset under consideration. For database compounds 01-48, comprising alkyl and aryl substitution in 4- and 5-position, the fragmental methods ACD/log P, CLOGP, and KOWWIN perform significantly better than the atom-based approach XLOGP and the whole-molecule method QLOGP. For database compounds 49-68, comprising formyl and acyl substitution in 4- and 5-position, superiority of the whole-molecule method QLOGP over the substructure-based approaches is observed. The strong underestimation of log P for compounds 49-68 probably indicates hidden physicochemical phenomena resulting from the juxtaposition of the acyl and dithiole moieties. CONCLUSIONS: All calculation methods included in this study need a thorough refinement to adequately cope with particular solvation behavior suspected to prevail in formyl- or acyl-DTT and DTO, which represent a chemical class of high pharmacological interest.

The identification of 1,3-oxazolidine-2-thiones and 1,3-thiazolidine-2-thiones from the reaction of glucose with benzyl isothiocyanate.

The structure of interaction products resulting from the reaction of unmodified glucose with benzyl isothiocyanate is reported. Prior to their identification, the main products of this reaction were isolated using solid-phase extraction (SPE) as well as preparative HPLC. They were then identified by NMR and MS as 3-benzyl-4-hydroxy-5-(D-arabino-1,2,3,4-tetrahydroxybutyl)-1,3-oxazolidine-2-thione, 3-benzyl-4-hydroxy-4-hydroxymethyl-5-(D-erythro-1,2,3-trihydroxypropyl)-1,3-oxazolidine-2-thione, N-benzyl-(D-gluco-4,5-dihydroxy-6-hydroxymethyl-tetrahydropyrano)[2,3-b]oxazolidine-2-thione and 3-benzyl-4-(N-benzyl amino)-5-(D-arabino-1,2,3,4-tetrahydroxybutyl)-1,3-thiazolidine-2-thione. The identity of the last compound was secured by X-ray crystal structure data.

Capillary electrophoretic determination of dithiocarbamates and ethyl xanthate.

A simple and sensitive capillary electrophoretic method was developed for the separation and determination of sodium methyldithiocarbamate (metham), manganese ethylenebisdithiocarbamate (maneb) and ethyl xanthate in boric acid buffer by direct UV absorbance detection at lambda = 254 nm. The separation is dependent on pH and nature of the buffer. The detection limits (S/N = 3) are 1.7 x 10(-6) mol/L for ethyl xanthate, 1.3 x 10(-6) mol/L for metham and 2.1 x 10(-6) mol/L for maneb. The method has been successfully applied to the analysis of wheat samples spiked with maneb and in a commercial sample.

Determination of flotation reagents used in tin-mining by capillary electrophoresis.

Alkyl xanthates (O-alkyl dithiocarbonates) and phosphonates are important organic collectors for the flotation of metals from crude ore. Leaching from waste dumps into river and ground water, these substances can cause environmental pollution. A capillary electrophoretic method for the routine determination of ethyl, isopropyl, hexyl xanthate, and styrene phosphonate has been developed. Separation within 12 min could be achieved in borate pH 8.8 performing UV detection at 254 and 300 nm simultaneously. To improve the limits of detection obtained with hydrodynamic injection (0.4-1.5 ppm), field amplified sample injection (FASI) and stacking were investigated. An increase in sensitivity up to 4-8 fold could be achieved by pressure assisted FASI. Applying a stacking method to enrich the analytes by filling the capillary with sample solution to one third of its length, the limits of detection could be decreased to 10-40 ppb. Water samples from a former tin ore mining area have been analyzed using the optimized stacking technique. Quantitation was performed by standard addition. Good precision and accuracy were obtained, making this robust capillary electrophoretic method well-suited for routine analysis.

Quantitative determination of isothiocyanates, dithiocarbamates, carbon disulfide, and related thiocarbonyl compounds by cyclocondensation with 1,2-benzenedithiol.

A recently developed UV spectroscopic method for quantitating isothiocyanates (R-N=C=S) at the nanomole level is based on the observation that the highly electrophilic central carbon atom of the -N=C=S group can undergo successive nucleophilic additions with reagents containing two sulfhydryl groups on adjacent carbon atoms to form a cyclic thiocarbonyl product and release the nitrogen atom as a primary amine (Y. Zhang, C.-G. Cho, G. H. Posner, and P. Talalay, Anal. Biochem. 205, 100-107, 1992). The assay utilizes 1, 2-benzenedithiol as the vicinal dithiol reagent and measures the reaction product, 1,3-benzodithiole-2-thione, spectroscopically (am of 23,000 M-1 cm-1 at lambdamax = 365 nm). This paper reports a dramatic improvement in the analytical sensitivity of this method. By separating the cyclocondensation product by a simple isocratic HPLC method and using an automatic integrator, the sensitivity of detection has been lowered to a few picomoles of isothiocyanate. Furthermore, we now find that the chemical specificity of the cyclocondensation reaction is not restricted to isothiocyanates, but includes dithiocarbamates, and related thiocarbonyl compounds such as carbon disulfide, certain substituted thiourea derivatives, and xanthates. The availability of such analytical methods is important not only because isothiocyanates (and their glucosinolate precursors) are present in edible plants and are consumed by humans in substantial quantities, but also because some dithiocarbamates are toxic, and are widely used in the rubber industry as vulcanization accelerators and in agriculture as fungicides, insecticides, and herbicides. The analysis of many isothiocyanates is complicated by their extreme volatility. This difficulty can be circumvented by converting isothiocyanates quantitatively into dithiocarbamates (by facile addition of a mercaptan such as N-acetylcysteine) and quantitating the nonvolatile dithiocarbamate by the cyclocondensation reaction.

[Photometric determination of xanthates in the air of work areas]. / Fotometricheskoe opredelenie ksantogenatov v vozdukhe rabochei zony.

The article contains a description of a photometric technique for xanthate detecting in the air in the working zone area. The detection technique is based on the xanthates' interaction with the nickel salts, with the formation of yellow--coloured nickel xanthates and subsequent photometry of the 20 mn thick solution in dishes at 440 nm wave.