ZnO-CdO nanocomposites incorporated with graphene oxide nanosheets for efficient photocatalytic degradation of bisphenol A, thymol blue and ciprofloxacin.

The widespread existence of different organic contaminants mostly phenolic compounds, organic dyes and antibiotics in water bodies initiated by the various industrial wastes that raised great scientific concern and public awareness as well recently owing to their prospective capability to spread these contaminants resistant gene and pose hazard to human. In the present study, a series of nanostructured ZnO-CdO incorporated with reduced graphene oxide (ZCG nanocomposites) were successfully synthesized by a simple refluxing method and characterized by using the X-ray diffraction (XRD), Raman spectroscopy, FT-IR spectroscopy, photoluminescence spectroscopy, field emission-scanning microscope (FE-SEM) and UV-visible diffused reflectance spectroscopy (DRS) for the photocatalytic degradation of bisphenol A (BPA), thymol blue (ThB) and ciprofloxacin (CFn) with illumination of UV light. The maximum degradation and mineralization of BPA, ThB and CFn was achieved around 98.5%, 98.38% and 99.28% over the ZCG-5 nanocomposite photocatalyst after UV light irradiation for 180 min, 120 min and 75 min, respectively. The superior photocatalytic activity of ZCG-5 ascribed to enhance adsorption capacity, effective separation of charge carriers consequential for the production of more ROS after incorporation of RGO nanosheets with ZnO-CdO in photocatalyst. The conceivable photocatalytic degradation mechanism of BPA, ThB and CFn was elucidated through ROS identification and the assessment of photocatalyst stability by reusability, EEO (kwh/m3order) and UV light dose (mJ/cm2) were evaluated. The plausible photocatalytic degradation pathways were proposed for the degradation of BPA, ThB and CFn via GC-MS analysis. The present work investigates the efficient removal of BPA, ThB and CFn using ZCG nanocomposites as photocatalyst.

Development of a Dye-Based Device to Assess Poultry Meat Spoilage. Part I: Building and Testing the Sensitive Array.

The rationale behind the material and dye selection and the investigation of the properties of a solid-phase sensor array designed for following chicken meat spoilage is presented, having in mind that the final target must be the naked eye identification of the degradation steps. The device is obtained by fixing five acid-base indicators, m-cresol purple (1), o-cresol red (2), bromothymol blue (3), thymol blue (4), and chlorophenol red (5), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent, (6) on a commercial cellulose-based support. The dimensions of the sensor and the amount of dye sorbed on the solid are carefully studied. The preparation protocol to get reproducible sensing materials is established, based on the kinetic study and the color change investigation. The material stability and the capacity of changing color, according to the acid-base properties of the dyes, are tested. The sources of uncertainty, coming from the technique employed for signal data acquisition and treatment and from the intrinsic variability of the spots based on the commercial support, are established. The highest variability does not come from photo acquisition by a mobile phone, the effect of the illumination equipment, the partial least-squares (PLS) model employed to assess the amount of dye sorbed into the solid but from the variability of different spots and was found equal to 10%. The uncertainty is adequate for final employment since it is referred to as replicates under different conditions that are definitively judged almost always identical by naked eye evaluation, which is our last target for assessing a change of the colors associated with spoilage.

Development of a Dye-Based Device to Assess the Poultry Meat Spoilage. Part II: Array on Act.

This work presents a colorimetric dye-based array for naked-eye detection of chicken meat spoilage. The array is obtained by fixing five acid-base indicators, m-cresol purple (1), o-cresol red (2), bromothymol blue (3), thymol blue (4), and chlorophenol red (5), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent (6), on a cellulose-based support. The dyes, being permanently charged, are fixed on the support via ion-exchange. The entire degradation process of beast poultry meat, at ambient temperature and in a domestic fridge, is followed by the change of the color of the array, placed in the headspace over the meat samples. The device is set after selection of the most suitable starting form, which could be the acidic or the basic color of indicators, being the proper dye concentration and the dimension of the spots already established. Basing on sensors colors, we identified three levels of the degradation process of chicken meat, named SAFE, WARNING, and HAZARD. By instrumental analysis, we demonstrated that sensors response was correlated to volatile organic compounds (VOCs) composition in the headspace and, thus, to meat spoilage progress. We demonstrated that biogenic amines (BAs), commonly considered a critical spoilage marker, are indeed produced into the samples but never present in the headspace, even in traces, during the investigated time-lapse. The VOC evolution nevertheless allows one to assign the sample as WARNING and further HAZARD. Some indicators turned out to be more informative than others, and the best candidates for a future industrial application resulted in a bromothymol blue (3)-, chlorophenol red (5)-, and Ellman's reagent (6)-based array.

Development of a low cost gas diffusion device for ammonia detection in the vitreous humor and its preliminary application for estimation of the time since death.

A simple and low cost analytical device is described for the determination of ammonium in the vitreous humor suitable for inferring the post mortem interval in forensic cases. The device is based on ammonia formation from ammonium ion by means of NaOH addition to the vitreous humor sample and its detection with a pH chemical indicator in the gas phase above the vitreous humor sample. From the gas phase, ammonia diffuses through a polymeric membrane and it is trapped and detected with a droplet of pH indicator thymol blue. The color change of the droplet is measured using a smartphone camera. Under optimal conditions, the device showed a limit of detection of 0.2mM, with between days precision of ≤ 15% expressed as relative standard deviation, and an accuracy between days from 88.3% to 114.5%. This homemade gas diffusion analytical device was successfully used for the determination of ammonia in vitreous humor samples from forensic autopsies. The results obtained with the proposed method, although for a limited number, showed a close correlation with the data obtained with an instrumental analysis based on capillary electrophoresis. Moreover a significant correlation was also found between the results of the present method and the time elapsed since death by a simple evaluation of the color intensity. In conclusion, this preliminary study showed that the proposed device, after adequate validation, could be a promising tool for a presumptive estimation of the time since death directly at the crime scene.

Biostimulatory effects of simvastatin on MDPC-23 odontoblast-like cells.

The aim of this study was to evaluate the bioactivity and cytocompatibility of simvastatin (SV) applied to MDPC-23 odontoblast-like cells. For this purpose, MDPC-23 cells were seeded in 96-well plates and submitted to treatments with 0.01 or 0.1 µM of SV for 24 h, 72 h or continuously throughout the experimental protocol. The negative control group (NC) was maintained in DMEM. Cell viability (MTT), ALP activity (thymolphthalein monophosphate), and mineralized matrix deposition (alizarin red) were analyzed at several time points. The data were submitted to ANOVA and Tukey's test (α = 0.05). Although cell viability was observed in the groups treated with SV, these groups did not differ from the NC up to 7 days. There was a reduction in cell viability for the groups treated with 0.1 µM of SV for 72 h, and submitted to continuous mode after 14 days. A significant increase in ALP activity occurred in the group treated with 0.01 µM of SV for 24 h, compared with the NC; however, only the group treated with 0.1 µM of SV in continuous mode reduced the ALP activity, in comparison with the NC. After 14 days, only continuous treatment with 0.1 µM of SV did not differ from NC, whereas the other experimental groups showed increased mineralized matrix deposition. Thus, it was concluded that low concentrations of simvastatin were bioactive and cytocompatible when applied for short periods to cultured MDPC-23 odontoblast-like cells.

Biostimulatory effects of simvastatin on MDPC-23 odontoblast-like cells

Abstract: The aim of this study was to evaluate the bioactivity and cytocompatibility of simvastatin (SV) applied to MDPC-23 odontoblast-like cells. For this purpose, MDPC-23 cells were seeded in 96-well plates and submitted to treatments with 0.01 or 0.1 μM of SV for 24 h, 72 h or continuously throughout the experimental protocol. The negative control group (NC) was maintained in DMEM. Cell viability (MTT), ALP activity (thymolphthalein monophosphate), and mineralized matrix deposition (alizarin red) were analyzed at several time points. The data were submitted to ANOVA and Tukey's test (α = 0.05). Although cell viability was observed in the groups treated with SV, these groups did not differ from the NC up to 7 days. There was a reduction in cell viability for the groups treated with 0.1 μM of SV for 72 h, and submitted to continuous mode after 14 days. A significant increase in ALP activity occurred in the group treated with 0.01 μM of SV for 24 h, compared with the NC; however, only the group treated with 0.1 μM of SV in continuous mode reduced the ALP activity, in comparison with the NC. After 14 days, only continuous treatment with 0.1 μM of SV did not differ from NC, whereas the other experimental groups showed increased mineralized matrix deposition. Thus, it was concluded that low concentrations of simvastatin were bioactive and cytocompatible when applied for short periods to cultured MDPC-23 odontoblast-like cells.

Microenvironmental pH measurement during sodium naproxenate dissolution in acidic medium by UV/vis imaging.

Variable dissolution from sodium salts of drugs containing a carboxylic acid group after passing the acidic environment of the stomach may affect oral bioavailability. The aim of the present proof of concept study was to investigate pH effects in relation to the dissolution of sodium naproxenate in 0.01M hydrochloric acid. For this purpose a UV/vis imaging-based approach capable of measuring microenvironmental pH in the vicinity of the solid drug compact as well as monitoring drug dissolution was developed. Using a pH indicating dye real-time spatially resolved measurement of pH was achieved. Sodium naproxenate, can significantly alter the local pH of the dissolution medium, is eventually neutralized and precipitates as the acidic species naproxen. The developed approach is considered useful for detailed studies of pH dependent dissolution phenomena in dissolution testing.

Spectroscopic investigation on sonodynamic and sonocatalytic damage of BSA molecules by Thymol Blue (TB) derivants under ultrasonic irradiation.

In this paper, the Thymol Blue derivants including Thymol Blue (thymolsulfonphthalein), Thymol Blue-DA (3,3'-Bis [N,N-bis (carboxymethyl) aminomethyl] thymolsulfonphthalein) and Thymol Blue-DA-Fe(III) (3,3'-Bis [N,N-bis (carboxymethyl) aminomethyl] thymolsulfonphthalein-Ferrous(III)) were adopted as sonosensitizers to study the sonodynamic and sonocatalytic activities under ultrasonic irradiation. At first, the interaction of Thymol Blue derivants with bovine serum albumin (BSA) was studied by fluorescence spectroscopy. On that basis, the sonodynamic and sonocatalytic damages of Thymol Blue derivants to BSA under ultrasonic irradiation were investigated by the combination of UV-vis, circular dichroism (CD) and fluorescence spectroscopy. Meanwhile, some influenced factors (ultrasonic irradiation time, Thymol Blue derivants concentration and ionic strength) on the damaging degree of BSA molecules were also reviewed. In addition, synchronous fluorescence spectra were used to estimate the binding and damage sites of Thymol Blue derivants to BSA. Finally, the generation of ROS during sonodynamic and sonocatalytic processes was confirmed by the method of Oxidation-Extraction Spectrometry (OEP). Perhaps, this paper may offer some important subjects for the study of Thymol Blue derivants in sonodynamic therapy (SDT) and sonocatalytic therapy (SCT) technologies for tumor treatment and the effect of the amino acid and central metal.

Evaluation of hepatoprotective activity of water-soluble polysaccharide fraction of Stellaria media L.

Therapy of rats with CCl4 hepatitis with Stellaria media L. water-soluble polysaccharide fraction in a dose of 100 mg/kg reduces serum activities of transaminases (ALT and AST), alkaline phosphatase, bilirubin, and the thymol test values. In the liver, the density of inflammatory infiltration of the organ parenchyma, total count of necrotic hepatocytes, fatty and protein degeneration are reducing. Hence, water-soluble polysaccharide fraction, isolated from the terrestrial part of Stellaria media L., is characterized by hepatoprotective activity.

Ultra-thin porous glass membranes--an innovative material for the immobilization of active species for optical chemosensors.

In addition to polymers, porous glasses can be used for the immobilization of indicators, chromoionophores or enzymes. Advantages of these materials include, among others, the photochemical and thermal stability. Porous glass membranes (CPG) based on phase-separated alkali borosilicate glasses with thicknesses of 250-300 µm and dimensions of approximately 9-13 mm² were used in this work. The average pore diameter was found to be between 12 and 112 nm. Initially, the membrane permeability for water was determined. Furthermore, the absorption spectra for the water-soaked membranes were recorded optically. CPG membranes which are pH-sensitive were prepared based on the covalent immobilization of thymol blue and a derivative of styryl acridine. In each case, the absorption spectra of the immobilized indicators are shown. The t90-times vary between 4 and 20 min and were determined for the thermodynamic equilibrium. The influence of the ionic strength on the characteristic curve is discussed and detailed results are given. After the storage time of about 900 days a pH-sensitivity for a CPG membrane styryl acridine derivative sample was still detectable.

Evaluation of a hydrophilic ionic liquid as a salting-out phase separation agent to a water-tetrahydrofuran homogeneous system for aqueous biphasic extraction separation.

The use of a hydrophilic ionic liquid (IL), 1-butyl-3-methylimidazolium chloride (C(4)mimCl), as a salting-out phase separation agent to a water-tetrahydrofuran homogeneous system was studied for possible applications to novel aqueous biphasic extraction separation. The IL showed a salting-out phase-separation ability. Also, differences in the polarity between the formed two phases were smaller than that when using NaCl as a salting-out agent. This result suggested that C(4)mimCl remaining in water-rich phase acts not only as a salting-out agent, but also a component of a mixed-solvent. Possible uses of C(4)mimCl/NaCl mixed salting-out agent system were also discussed.

Purification and characterization of meta-cresol purple for spectrophotometric seawater pH measurements.

Spectrophotometric procedures allow rapid and precise measurements of the pH of natural waters. However, impurities in the acid-base indicators used in these analyses can significantly affect measurement accuracy. This work describes HPLC procedures for purifying one such indicator, meta-cresol purple (mCP), and reports mCP physical-chemical characteristics (thermodynamic equilibrium constants and visible-light absorbances) over a range of temperature (T) and salinity (S). Using pure mCP, seawater pH on the total hydrogen ion concentration scale (pHT) can be expressed in terms of measured mCP absorbance ratios (R = λ2A/(λ1)A) as follows: [formula in text] where -log(K(2)Te2) = a + (b/T) + c ln T ­ dT; a = -246.64209 + 0.315971S + 2.8855 × 10(-4)S2; b = 7229.23864 ­ 7.098137S ­ 0.057034S2; c = 44.493382 ­ 0.052711S; d = 0.0781344; and mCP molar absorbance ratios (ei) are expressed as e1 = -0.007762 + 4.5174 × 10(-5)T and e3/e2 = -0.020813 + 2.60262 × 10(-4)T + 1.0436 × 10(-4) (S ­ 35). The mCP absorbances, λ1A and λ2A, used to calculate R are measured at wavelengths (λ) of 434 and 578 nm. This characterization is appropriate for 278.15 ≤ T ≤ 308.15 and 20 ≤ S ≤ 40.

Ionic liquid "buffers"-pH control in ionic liquid systems.

We describe hydrated ionic liquids which have an intrinsic proton buffering action and hence an ability to control proton activity in an ionic medium.

Sensitive and rapid titrimetric and spectrophotometric methods for the determination of stavudine in pharmaceuticals using bromate-bromide and three dyes

Four sensitive and rapid methods for the determination of stavudine (STV) in bulk drug and in dosage forms were developed and optimized. In titrimetry, aqueous solution of STV was treated with a known excess of bromate-bromide in HCl medium followed by estimation of unreacted bromine by iodometric back titration. Spectrophotometric methods involve the addition of a measured excess of bromate-bromide in HCl medium and subsequent estimation of the residual bromine by reacting with a fixed amount of methyl orange, indigocarmine or thymol blue followed by measurement of absorbance at 520 nm (method A), 610 nm (method B) or 550 nm (method C). In all the methods, the amount of bromate reacted corresponds to the amount of STV. Calculations in titrimetry were based on a 1:0.666 (STV:KBrO3) stoichiometry and the method was found to be applicable over 3.5-10 mg range. A linear increase in absorbance with concentration of STV was observed in the spectrophotometric methods, and the Beer's law was obeyed over the concentration ranges 0.125-1.75, 1-10 and 1-9.0 µg mL-1 STV for method A, method B and method C, respectively. The methods when applied to the determination of STV in tablets and capsules were found to give satisfactory results.

Este trabalho descreve quatro métodos rápidos e sensíveispara a determinação de estavudina (STV) na matéria-prima ou em produtos formulados. Soluções aquosas de STV podem ser tituladas tratando-as com excesso de bromato-brometo em meio ácido clorídrico, seguido da determinação iodimétrica de bromo em excesso. Métodos espectrofotométricos tambémenvolvem a adição de excesso de bromato-brometo à amostra, seguida da determinação de bromo residual por adição de uma quantidade fixa de alaranjado de metila, índigo-carmim ou azul de timol, e de medidas de absorbância nos comprimentos de onda apropriados: 520, 610 ou 550 nm. Em todos os métodos, a quantidade de bromato consumida corresponde à quantidade de STV e os resultados da sua aplicação à determinação de STV em comprimidos e cápsulas são satisfatórios.

A colorimetric assay for steady-state analyses of iodo- and bromoperoxidase activities.

The standard assay for iodoperoxidase activity is based on the spectrophotometric detection of triiodide formed during the enzymatic reaction. However, chemical instability of I3- has limited the method to high iodide concentrations and acidic conditions. Here we describe a simple spectrophotometric assay for the determination of iodoperoxidase activities of vanadium haloperoxidases based on the halogenation of thymol blue. The relation between color and chemical entities produced by the vHPO/H(2)O(2)/I(-) catalytic system was characterized. The method was extended to bromine and, for the first time, allowed measurement of both iodo- and bromoperoxidase activities using the same assay. The kinetic parameters (K(m) and k(cat)) of bromide and iodide for vanadium bromoperoxidase from Ascophyllum nodosum were determined at pH 8.0 from steady-state kinetic analyses. The results are concordant with an ordered two-substrate mechanism. It is proposed that halide selectivity is guided by the chemical reactivity of peroxovanadium intermediate rather than substrate binding. This method is superior to the standard I3- assay, and we believe that it will find applications for the characterization of other vanadium as well as heme haloperoxidases.

Sensitive and rapid titrimetric and spectrophotometric methods for the determination of stavudine in pharmaceuticals using bromate-bromide and three dyes.

Four sensitive and rapid methods for the determination of stavudine (STV) in bulk drug and in dosage forms were developed and optimized. In titrimetry, aqueous solution of STV was treated with a known excess of bromate-bromide in HCl medium followed by estimation of unreacted bromine by iodometric back titration. Spectrophotometric methods involve the addition of a measured excess of bromate-bromide in HCl medium and subsequent estimation of the residual bromine by reacting with a fixed amount of methyl orange, indigocarmine or thymol blue followed by measurement of absorbance at 520 nm (method A), 610 nm (method B) or 550 nm (method C). In all the methods, the amount of bromate reacted corresponds to the amount of STV. Calculations in titrimetry were based on a 1:0.666 (STV:KBrO3) stoichiometry and the method was found to be applicable over 3.5-10 mg range. A linear increase in absorbance with concentration of STV was observed in the spectrophotometric methods, and the Beer's law was obeyed over the concentration ranges 0.125-1.75, 1-10 and 1-9.0 microg mL-1 STV for method A, method B and method C, respectively. The methods when applied to the determination of STV in tablets and capsules were found to give satisfactory results.

Experimental correlation between the pKa value of sulfonphthaleins with the nature of the substituents groups.

This work presents the results obtained from a spectrophotometry study performed on some indicators of the sulfonphtaleins like phenol red (PR), thymol blue (TB), bromothymol blue (BTB), xylenol orange (XO) and methylthymol blue (MTB). During the first stage the acidity constants of some of the indicators were determined using the data from spectrophotometry, potentiometry and with the use of the software SQUAD. These were as follows: for the equilibrium 2H+BTB<-->H(2)BTB, log beta(2)=15.069+/-0.046 and for H+BTB<-->HBTB, log beta(1)=8.311+/-0.044. For the XO and the MTB five values were calculated for each, namely, for MTB: log beta(5)=42.035, log beta(4)=38.567+/-0.058, log beta(3)=32.257+/-0.057, log beta(2)=23.785+/-0.057, and log beta(1)=12.974+/-0.045 while for XO: log beta(5)=40.120+/-0.102, log beta(4)=35.158+/-0.062, log beta(3)=29.102+/-0.053, log beta(2)=21.237+/-0.044, and log beta(1)=11.682+/-0.044. During the second stage, a study was conducted on the effect of the substituents present in the indicators to determine the effect of different functional groups on the pK(a) value corresponding to the last indicator's dissociation.

Water-soluble pH-responsive dendritic core-shell nanocarriers for polar dyes based on poly(ethylene imine).

A simple general synthetic concept to build dendritic core-shell architectures with pH-labile linkers based on hyperbranched PEI cores and biocompatible PEG shells is presented. Using these dendritic core-shell architectures as nanocarriers, the encapsulation and transport of polar dyes of different sizes is studied. The results show that the acid-labile nanocarriers exhibit much higher transport capacities for dyes than unfunctionalized hyperbranched PEI. The cleavage of imine bonds and controlled release of the polar dyes revealed that weak acidic condition (pH approximately 5.0) could cleave the imine bonds linker and release the dyes up to five times faster than neutral conditions (pH = 7.4).

On-line solid phase selective separation and preconcentration of Cd(II) by solid-phase extraction using carbon active modified with methyl thymol blue.

An on-line flow system was used to develop a selective and efficient on-line sorbent extraction preconcentration system for cadmium. The method is based on adsorption of cadmium ions onto the activated carbon modified with methyl thymol blue. Then the adsorbed ions were washed using 0.5M HNO(3) and the eluent was used to determine the Cd(II) ions using flame atomic absorption spectrometry. The results obtained show that the modified activated carbon has the greatest adsorption capacity of 80 microg of Cd(II) per 1.0 g of the solid phase. The optimal pH value for the quantitative preconcentration was 9.0 and full desorption is achieved by using 0.5M HNO(3) solution. It is established that the solid phase can be used repeatedly without a considerable adsorption capacity loss. The detection limit was less than 1 ngmL(-1) Cd(II), with an enrichment factor of 1000. The calibration graph was linear in the range of 1-2000 ngmL(-1) Cd(II). The developed method has been applied to the determination of trace cadmium (II) in water samples and in the following reference materials: sewage sludge (CRM144R), and sea water (CASS.4) with satisfactory results. The accuracy was assessed through recovery experiments.

Determination of the complexation constants of Pb(II) and Cd(II) with thymol blue using spectrophotometry, SQUAD and the HSAB principle.

This paper presents the results concerning the determination of the formation constants of the complexes between thymol blue, TB, and the metal ions Pb(II) or Cd(II). The experimental procedure was carried out in the presence of a nitrogen atmosphere at 25 degrees C. The spectrophotometry data obtained were processed through the software SQUAD to calculate the complexation constants of the metal-indicator and to establish an adequate base of the models which considered the structure of the indicator, and the actual metal species in the aqueous solutions. For the Pb(II)-TB-H2O system the logK value calculated for the PbTB complex was 5.591+/-0.057 while for the Cd(II)-TB-H2O system, the logK value of the CdTB complex was 5.099+/-0.008. Also, supporting theoretical chemistry results on the chemical hardness of TB molecule were performed to enable establishment of a relative prediction scale of the TB complexation constants ranking in the framework of the Principle of Hard and Soft Acids and Bases or HSAB Principle.