Tibial Axis-to-Talus Distance: A Clinically Reliable Measurement for Sagittal Translation of the Talus in Total Ankle Arthroplasty.

Background: Sagittal talar translation is an important factor influencing the sagittal alignment of total ankle arthroplasty (TAA). Thus, accurate measurement of sagittal talar translation is crucial. This study proposes a simple method (tibiotalar distance [TTD]) that can quantify talar translation without being affected by the ankle and subtalar joint condition or the talar component position in patients with TAA. Methods: We enrolled 280 eligible patients (296 ankles) who underwent primary TAA between 2005 and 2019 and retrospectively reviewed them for sagittal talar translation. The TTD was measured for each patient on weight-bearing lateral ankle radiographs by 3 raters. In addition, we analyzed interrater and intrarater reliability for the TTD method. Results: We found that the TTD method could quantify the talar translation and was not affected by the preoperative condition of the ankle joint surface, subtalar joint pathologies, or the postoperative talar component position. The TTD method showed an excellent intraclass correlation coefficient (> 0.9) in all interrater and intrarater reliability analyses. In the analysis of 157 healthy, unoperated contralateral ankles, we identified that TTD showed a Gaussian distribution (p = 0.284) and a mean of 38.91 mm (normal range, 29.63-48.20 mm). Conclusions: The TTD method is a simple and reliable method that could be applied to patients with TAA to assess the sagittal talar translation regardless of the pre-and postoperative joint condition and implantation status.

Factors influencing the posterior cruciate ligament buckling phenomenon-a multiple linear regression analysis of bony and soft tissue structures of the knee joint.

PURPOSE: To determine whether posterior cruciate ligament (PCL) buckling (angular change) is associated with anterior cruciate ligament (ACL) status (intact or ruptured), meniscal bone angle (MBA), anterior tibial translation (ATT), body weight, femoral-tibial rotation (FTR), posterior tibial slope (PTS), PCL length and femoral-tibial distance (FTD) and to identify the factors that have the greatest influence. METHODS: All enrolled participants were scanned with a 3.0 T, 8-channel coil MRI system (Magnetom Verio; Siemens). Bone and soft tissue parameters were measured by MIMICS software for each subject and each measured parameter was correlated with PCL buckling phenomena. The correlated and statistically significant parameters were then analyzed by multiple linear regression to determine the magnitude of the effect of the different parameters on the PCL buckling phenomenon. RESULTS: A total of 116 subjects (50 ACL ruptured and 66 age, weight and height matched volunteers with uninjured knees) were enrolled. Among all measured parameters, there were 8 parameters that correlated with PCL angle (PCLA), of which ACL status had the strongest correlation with PCLA (r = - 0.67, p = < 0.001); and 7 parameters that correlated with PCL-posterior femoral cortex angle (PCL-PCA), of which ATT had the strongest correlation with PCL-PCA (r = 0.69, p = < 0.001). PCLIA was not significantly correlated with any of the measured parameters. Multiple linear regression analyses revealed four parameters can explain PCLA, of which ACL status had the strongest effect on PCLA (absolute value of standardized coefficient Beta was 0.508). Three parameters can explain PCL-PCA, of which ATT had the strongest effect on PCLIA (r = 0.69, p = < 0.001), ATT has the greatest effect on PCL-PCA (absolute value of normalized coefficient Beta is 0.523). CONCLUSIONS: PCLA may be a simple and easily reproducible and important supplement for the diagnosis of ACL injury; PCL-PCA is a simple and easily reproducible and important complementary tool for the detection of ATT. The use of PCLA is more recommended to aid in the diagnosis of ACL injury.

Impaired bone mineral density and microarchitecture in female adolescents with IgE-mediated cow's milk allergy.

This study compared the bone parameters of adolescents with persistent cow's milk allergy (CMA) with those of healthy adolescents. Adolescents with CMA had compromised bone parameters (lower bone mineral density, impaired trabecular microarchitecture, and lower bone strength). Partial exclusion diet was associated with better bone parameters than total exclusion diet. BACKGROUND: Persistent immunoglobulin E (IgE)-mediated cow's milk allergy (CMA) may impair bone parameters and increase the risk of fractures. High-resolution peripheral quantitative computed tomography (HR-pQCT) is a novel methodology that not only assesses trabecular and cortical bone compartments and volumetric density measurements, but also evaluates bone microarchitecture and estimates biomechanical properties through finite element analysis (FEA). Both HR-pQCT and bone strength parameters derived from FEA have shown a strong correlation with fracture risk. PURPOSE: To assess the bone density, microarchitecture, and bone strength of adolescents with persistent IgE-mediated CMA (IgE-CMA). METHODS: This was an observational, cross-sectional study with female adolescents with persistent IgE-CMA and healthy control participants matched by female sex and sexual maturation. Bone parameters were assessed by areal bone mineral density (aBMD) through dual-energy X-ray absorptiometry (DXA), bone microarchitecture by HR-pQCT at the radius and tibia, and laboratory markers related to bone metabolism. RESULTS: The median age of adolescents with persistent IgE-CMA (n = 26) was 13.0 years (interquartile range (IQR) 11.4-14.7) and of healthy control participants (n = 28) was 13.6 years (IQR 11.9-14.9). Adolescents with IgE-CMA ingested 27.4% less calcium (p = 0.012) and 28.8% less phosphorus (p = 0.009) than controls. Adolescents with IgE-CMA had lower bone mineral content (BMC) (38.83 g vs. 44.50 g) and aBMD (0.796 g/cm2 vs. 0.872 g/cm2) at lumbar spine, and lower BMC (1.11 kg vs. 1.27 kg) and aBMD (0.823 g/cm2 vs. 0.877 g/cm2) at total body less head (TBLH) (p < 0.05). However, Z-scores BMC and Z-scores aBMD at lumbar spine and TBLH, when adjusted for Z-score height/age, were not significantly different between the groups. Moreover, CMA adolescents had lower bone strength at the distal tibia (S 169 kN/mm vs. 194 kN/mm; F Load 8030 N vs. 9223 N) (p < 0.05). Pairing of groups by the presence of menarche showed compromised parameters at the tibia-lower total volumetric BMD (Tt.vBMD) (293.9 mg HA/cm3 vs. 325.9 mg HA/cm3) and trabecular vBMD (Tb.vBMD) (170.8 mg HA/cm3 vs. 192.2 mg HA/cm3), along with lower cortical thickness (Ct.th) (1.02 mm vs. 1.16 mm) and bone strength (S 174 kN vs. 210 kN; F Load 8301 N vs. 9950 N)-and at the radius (S 61 kN/mm vs. 71 kN/mm; F Load 2920 N vs. 3398 N) (p < 0.05) among adolescents with IgE-CMA. Adolescents with IgE-CMA on a total exclusion diet (n = 12) showed greater impairment of bone features than those on a partial exclusion diet (n = 14), with lower lumbar spine Z-score BMC (- 0.65 vs. 0.18; p = 0.013), lumbar spine trabecular bone score (TBS) (1.268 vs. 1.383; p = 0.005), Z-score TBS (0.03 vs. 1.14; p = 0.020), TBLH Z-score BMC (- 1.17 vs. - 0.35; p = 0.012), TBLH Z-score aBMD (- 1.13 vs. - 0.33; p = 0.027), Tt.vBMD at the tibia (259.0 mg HA/cm3 vs. 298.7 mg HA/cm3; p = 0.021), Ct.th at the tibia (0.77 mm vs. 1.04 mm; p = 0.015) and Ct.th at the radius (0.16 mm vs. 0.56 mm; p = 0.033). CONCLUSION: Adolescents with persistent IgE-CMA had lower aBMD and compromised microarchitecture (impaired trabecular microarchitecture and lower bone strength). Adolescents on a partial exclusion diet had better bone parameters than those on a total exclusion diet.

Diaphyseal giant cell tumour of mid-shaft tibia.

SummaryGiant cell tumours of bone are benign and locally aggressive tumours that usually occur in young adults and at the epiphysial locations after physeal closure. Occurrence outside of epiphysial locations and appearance in geriatric patients is rare. We report a case of a woman in her late 60s with a giant cell tumour of the mid-shaft of the right tibia. Extended curettage and biological reconstruction were performed with autologous double-barrel fibular struts and tri-cortical iliac crest bone grafting. At the 28-month follow-up examination, we noted full bony union at both ends with successful consolidation of the fibular struts, and importantly, no evidence of recurrence or other complications was observed.

Intralesional leiomyosarcoma malignant transformation from a biopsied benign angioleiomyoma of the proximal anterior tibia.

We present a novel case of a malignant transformation of an extremity soft tissue angioleiomyoma to leiomyosarcoma in a man in his late 70s who presented with a painful and increasing lump on his anterior tibia. Initial imaging and biopsy showed a benign angioleiomyoma which was excised for symptomatic reasons. An analysis of the resulting specimen revealed a 50×42×15 mm smooth muscle neoplasm consistent with angioleiomyoma with a 22×11 mm entirely intralesional nodular component in keeping with a grade 1 leiomyosarcoma. The malignant constituent of the lesion was entirely encased in benign angioleiomyoma negating the need for further surgery. Systemic staging investigation revealed no evidence of metastatic disease spread final staging as per the eighth edition of the American Joint Committee on Cancer (AJCC) Staging T1N0M0 R0 Stage 1 a.

[Design and application of a device for radiographic projection of the tibio-astragalangeal mortise]. / Diseño y aplicación de dispositivo para proyección radiográfica de la mortaja tibio-astragalina.

INTRODUCTION: ligamentous injuries of the distal tibiofibular syndesmosis resulting in its opening are common occurrences in traumatology; however, their diagnosis poses a challenge for orthopedic surgeons. The tibioastragaloid mortise radiograph view is the most commonly used method for diagnosing this type of injury, but its reliability is compromised due to variations in ankle positioning during the study, which often depend on the operator. OBJECTIVE: to demonstrate that the designed device achieves a correct and consistent radiographic image of the distal tibiofibular syndesmosis in the mortise view. MATERIAL AND METHODS: we present a prospective, longitudinal, observational study. We designed a polypropylene device that maintains the ankle at 90 degrees of dorsiflexion and 15 degrees of internal rotation. The device was used to take mortise view radiographs of healthy ankles, and corresponding measurements were taken to assess the syndesmosis. RESULTS: we evaluated a total of 46 radiographs of healthy ankles, with a predominance of left ankles. The obtained measurements were as follows: anterior tibiofibular distance (ATFD) ranged from 3 to 6 mm, posterior tibiofibular distance (PTFD) ranged from 1 to 3 mm, tibiofibular clear space (TFCS) ranged from 2 to 3 mm, and a Merle D'Aubigne ratio of 2:1 was observed in all ankles. When comparing the measurements obtained with those established by Harper and Keller, no statistically significant difference was found (2 < 5). CONCLUSION: with the use of the designed device, we achieved a correct and consistent radiographic image of the mortise and the distal tibiofibular syndesmosis.

INTRODUCCIÓN: las lesiones ligamentarias de la sindesmosis tibioperonea distal que ocasionan apertura de la misma son muy frecuentes en traumatología; sin embargo, su diagnóstico es un reto para el cirujano ortopedista. La radiografía de la mortaja tibioastragalina es el método más utilizado para el diagnóstico de este tipo de lesiones, pero es poco confiable ya que la posición del tobillo durante el estudio suele variar dependiendo del operador. OBJETIVO: demostrar que con el uso del dispositivo diseñado se logra una imagen radiográfica correcta y constante de la sindesmosis tibioperonea distal en la proyección de la mortaja. MATERIAL Y MÉTODOS: estudio prospectivo, longitudinal y observacional. Diseñamos un dispositivo de polipropileno que mantiene el tobillo a 90 grados de dorsiflexión y rotación interna de 15 grados. Aplicamos el dispositivo para tomar radiografías de la mortaja en tobillos sanos y les realizamos las mediciones correspondientes para valorar la sindesmosis. RESULTADOS: valoramos un total de 46 radiografías de tobillos sanos, con un predominio de tobillos izquierdos. Las mediciones conseguidas fueron las siguientes: espacio tibioperoneo (ETP) de 3 a 6 mm, la superposición tibioperonea (STP) de 1 a 3 mm, espacio astrágalo-tibial medial (EATM) de 2 a 3 mm y una relación de Merle D'Aubigne de 2:1 en todos los tobillos. Al comparar las mediciones obtenidas con las establecidas por Harper y Keller, no se encontró una diferencia estadísticamente significativa (2 < 5). CONCLUSIÓN: con el uso del dispositivo diseñado, obtuvimos una correcta y constante imagen radiográfica de la mortaja y la sindesmosis tibioperonea distal.

Assessment of bone ingrowth around beaded coated tibial implant for total ankle replacement using mechanoregulatory algorithm.

The long-term performance of porous coated tibial implants for total ankle replacement (TAR) primarily depends on the extent of bone ingrowth at the bone-implant interface. Although attempts were made for primary fixation for immediate post-operative stability, no investigation was conducted on secondary fixation. The aim of this study is to assess bone ingrowth around the porous beaded coated tibial implant for TAR using a mechanoregulatory algorithm. A realistic macroscale finite element (FE) model of the implanted tibia was developed based on computer tomography (CT) data to assess implant-bone micromotions and coupled with microscale FE models of the implant-bone interface to predict bone ingrowth around tibial implant for TAR. The macroscale FE model was subjected to three near physiological loading conditions to evaluate the site-specific implant-bone micromotion, which were then incorporated into the corresponding microscale model to mimic the near physiological loading conditions. Results of the study demonstrated that the implant experienced tangential micromotion ranged from 0 to 71 µm with a mean of 3.871 µm. Tissue differentiation results revealed that bone ingrowth across the implant ranged from 44 to 96 %, with a mean of around 70 %. The average Young's modulus of the inter-bead tissue layer varied from 1444 to 4180 MPa around the different regions of the implant. The analysis postulates that when peak micromotion touches 30 µm around different regions of the implant, it leads to pronounced fibrous tissues on the implant surface. The highest amount of bone ingrowth was observed in the central regions, and poor bone ingrowth was seen in the anterior parts of the implant, which indicate improper osseointegration around this region. This macro-micro mechanical FE framework can be extended to improve the implant design to enhance the bone ingrowth and in future to develop porous lattice-structured implants to predict and enhance osseointegration around the implant.

Comparison of the biomechanical properties of grafts in three anterior cruciate ligament reconstruction techniques based on three-dimensional finite element analysis.

OBJECTIVE: To evaluate the biomechanical characteristics of grafts from three different anterior cruciate ligament (ACL) reconstructive surgeries and to determine which method is better at restoring knee joint stability. METHODS: A 31-year-old female volunteer was enrolled in the study. According to the magnetic resonance imaging of her left knee, a three-dimensional model consisting of the distal femur, proximal tibia and fibula, ACL, posterior cruciate ligament, medial collateral ligament and lateral collateral ligament was established. Then, the ACL was removed from the original model to simulate the knee joint after ACL rupture. Based on the knee joint model without the ACL, single-bundle ACL reconstruction, double-bundle ACL reconstruction, and flat-tunnel ACL reconstruction were performed. The cross-sectional diameters of the grafts were equally set as 6 mm in the three groups. The bone tissues had a Young's modulus of 17 GPa and a Poisson's ratio of 0.36. The ligaments and grafts had a Young's modulus of 390 MPa and a Poisson's ratio of 0.4. Six probes were placed in an ACL or a graft to obtain the values of the equivalent stress, maximum principal stress, and maximum shear stress. After pulling the proximal tibia with a forward force of 134 N, the distance that the tibia moved and the stress distribution in the ACL or the graft, reflected by 30 mechanical values, were measured. RESULTS: The anterior tibial translation values were similar among the three groups, with the double-bundle ACL reconstruction group performing the best, followed closely by the patellar tendon ACL reconstruction group. In terms of stress distribution, 13 out of 30 mechanical values indicated that the grafts reconstructed by flat bone tunnels had better performance than the grafts in the other groups, while 12 out of 30 showed comparable outcomes, and 5 out of 30 had worse outcomes. CONCLUSION: Compared with traditional single-bundle and double-bundle ACL reconstructions, flat-tunnel ACL reconstruction has advantages in terms of stress dispersion. Additionally, flat-tunnel ACL reconstruction falls between traditional double-bundle and single-bundle ACL reconstructions in terms of restoring knee joint stability and is superior to single-bundle ACL reconstruction.

Correlation between higher lateral tibial slope and inferior long term subjective outcomes following single bundle anterior cruciate ligament reconstruction.

BACKGROUND: The impact of anatomical factors, such as the lateral tibial slope (LTS), on outcomes following anterior cruciate ligament (ACL) reconstruction is an area of growing interest. This study was led by the observation that patients with a higher LTS may have different recovery trajectories. HYPOTHESIS/PURPOSE: The purpose of this study was to investigate the correlation between a higher LTS and long term subjective outcomes following single-bundle ACL reconstruction. STUDY DESIGN: This study was designed as a retrospective cohort study. METHODS: The study comprised 138 patients who underwent single-bundle ACL reconstruction. The LTS was measured on preoperative radiographs. Patient-reported outcome measures (PROMs) were collected, which included the Lysholm Knee Score, UCLA Activity Score, IKDC Score, and Tegner Activity Score, over a mean follow-up duration of 137 months. RESULTS: A significant negative correlation was found between LTS and all measured PROMs (p < 0.001). The established cut-off value of LTS distinguishing between "Good" and "Fair" Lysholm scores was 8.35 degrees. Female patients have statistically significant higher LTS and lower PROMs scores than male. Patients with LTS greater than or equal to 8.35 had significantly lower PROMs, indicative of poorer functional and subjective outcomes. CONCLUSION: Our findings suggest that a higher LTS is associated with inferior subjective outcomes following single-bundle ACL reconstruction in long term. The LTS cut-off value of 8.35 degrees could potentially be used as a reference in preoperative planning and patient counseling. CLINICAL RELEVANCE: Understanding the relationship between LTS and ACL reconstruction outcomes could inform surgical planning and postoperative management. These findings highlight the need to consider anatomical variances, such as LTS, when assessing patient-specific risks and recovery expectations, contributing to the advancement of personalized care in sports medicine.

Bone Age Determination of Epiphyseal Fusion at Knee Joint and Its Correlation with Chronological Age.

Background and Objectives: Bone age determination is a valuable method for forensic and disaster identifications of unknown human remains, as well as for medical and surgical procedural purposes. This retrospective research study aimed to determine the age based on epiphyseal fusion stages and investigate differences related to gender. Materials and Methods: X-rays of the knee were collected from medical imaging centers in hospitals in the south of Jordan and examined by two observers who determined the bone epiphyseal phase of closure for the femur, tibia, and fibula bone ends close to the knee based on a three-stage classification. Results: The main results revealed that females showed earlier epiphyseal union (Stage II) at the lower end of the femur and the upper ends of the tibia and fibula compared to males. In males, the start of complete union (Stage III) at knee bones was seen at the age of 17-18 years, while in females, it was seen at the age of 16-17 years. Additionally, knee bones showed complete union in 100% of males and females in the age groups 21-22 years and 20-21 years, respectively. Although females showed an earlier start and end of epiphyseal complete union than males, analysis of collected data showed no significant age differences between males and females at the three stages of epiphyseal union of the knee bones. Conclusions: Findings of the radiographic analysis of bone epiphyseal fusion at the knee joint are a helpful method for chronological age determination. This study supports the gender and ethnicity variation among different geographical locations. Studies with a high sample number would be needed to validate our findings.

Tibial and femoral articular cartilage exhibit opposite outcomes for T1ρ and T2* relaxation times in response to acute compressive loading in healthy knees.

Abnormal loading is thought to play a key role in the disease progression of cartilage, but our understanding of how cartilage compositional measurements respond to acute compressive loading in-vivo is limited. Ten healthy subjects were scanned at two timepoints (7 ± 3 days apart) with a 3 T magnetic resonance imaging (MRI) scanner. Scanning sessions included T1ρ and T2* acquisitions of each knee in two conditions: unloaded (traditional MRI setup) and loaded in compression at 40 % bodyweight as applied by an MRI-compatible loading device. T1ρ and T2* parameters were quantified for contacting cartilage (tibial and femoral) and non-contacting cartilage (posterior femoral condyle) regions. Significant effects of load were found in contacting regions for both T1ρ and T2*. The effect of load (loaded minus unloaded) in femoral contacting regions ranged from 4.1 to 6.9 ms for T1ρ, and 3.5 to 13.7 ms for T2*, whereas tibial contacting regions ranged from -5.6 to -1.7 ms for T1ρ, and -2.1 to 0.7 ms for T2*. Notably, the responses to load in the femoral and tibial cartilage revealed opposite effects. No significant differences were found in response to load between the two visits. This is the first study that analyzed the effects of acute loading on T1ρ and T2* measurements in human femoral and tibial cartilage separately. The results suggest the effect of acute compressive loading on T1ρ and T2* was: 1) opposite in the femoral and tibial cartilage; 2) larger in contacting regions than in non-contacting regions of the femoral cartilage; and 3) not different visit-to-visit.

Morphological analysis of the distal femur as a surgical reference in biplane distal femoral osteotomy.

Distal femoral osteotomy (DFO) is performed alone or with high tibial osteotomy (HTO) for patients with osteoarthritis and distal femur deformities. DFO is technically demanding, particularly when creating an anterior flange. Herein, we examined the morphological characteristics of the distal femur based on the cortical shape as a surgical reference for biplanar DFO. Computed tomography images of 50 valgus and 50 varus knees of patients who underwent biplanar DFO or total knee arthroplasty were analyzed. Axial slices at the initial level of the transverse osteotomy in the DFO and slices 10 mm proximal and 10 mm distal to that level were selected. The medial and lateral cortical angles and heights (MCLA, LCLA, MCH, and LCH) were measured on axial slices. Statistical comparisons were performed between the medial and lateral cortices and valgus and varus knees. MCLA and MCH were significantly smaller and lower, respectively, than LCLA and LCH (P < 0.01). The MCLA and MCH of varus knees were significantly smaller and lower, respectively, than those of valgus knees (P < 0.01). Surgeons should carefully observe morphological differences in the distal femur cortex, distinguishing between medial and lateral knees and varus and valgus knees during the creation of the anterior flange in the DFO.

Total knee arthroplasty following lateral closing-wedge high tibial osteotomy versus primary total knee arthroplasty: a propensity score matching study.

BACKGROUND: The disparity in patient-reported outcomes between total knee arthroplasty (TKA) following high tibial osteotomy (HTO) and primary TKA has yet to be fully comprehended. This study aims to compare the patient-reported outcomes, radiological parameters and complication rates between TKA following HTO and primary TKA. METHODS: Sixty-five patients who underwent TKA following lateral closing-wedge HTO were compared to a matched group of primary TKA at postoperative 6-months and 1-year. Between-group confounders of age, gender, smoking status, Body Mass index, preoperative Numeric Rating Scale (NRS) pain in rest, Knee injury and Osteoarthritis Outcome Score-Physical function Shortform (KOOS-PS), EuroQol five-dimensional (EQ-5D) overall health score, and Oxford Knee Score (OKS) were balanced by propensity score matching. Patient-reported outcome measures were NRS pain in rest, KOOS-PS, EQ-5D overall health score, and OKS. Radiological parameters were femorotibial angle, medial proximal tibial angle, anatomical lateral distal femoral angle, posterior tibial slope, and patellar height assessed by Insall-Salvati ratio. The complication rates of TKA were compared between the two groups. The HTO survival time, the choice of staple removal before or during TKA in patients who underwent TKA following HTO patients, and the rate of patellar resurfacing were assessed. The p value < 0.0125 indicates statistical significance after Bonferroni correction. RESULTS: After propensity score matching, no significant between-group differences in the patient-reported outcome measures, radiographical parameters and complication rates were found (p > 0.0125). In the TKA following HTO group, with an average HTO survival time of 8.7 years, staples were removed before TKA in 46 patients (71%) and during TKA in 19 patients, and 11 cases (17%) had patella resurfacing. In the primary TKA group, 15 cases (23%) had patella resurfacing. CONCLUSION: The short-term assessment of TKA following HTO indicates outcomes similar to primary TKA. A previous HTO does not impact the early results of subsequent TKA, suggesting that the previous HTO has minimal influence on TKA outcomes. LEVEL OF EVIDENCE: III, cohort study.

Spatial variations in the osteocyte lacuno-canalicular network density and analysis of the connectomic parameters.

Osteocyte lacuno-canalicular network (LCN) is comprised of micrometre-sized pores and submicrometric wide channels in bone. Accumulating evidence suggests multiple functions of this network in material transportation, mechanobiological signalling, mineral homeostasis and bone remodelling. Combining rhodamine staining and confocal laser scanning microscopy, the longitudinal cross-sections of six mouse tibiae were imaged, and the connectome of the network was quantified with a focus on the spatial heterogeneities of network density, connectivity and length of canaliculi. In-vivo loading and double calcein labelling on these tibiae allowed differentiating the newly formed bone from the pre-existing regions. The canalicular density of the murine cortical bone varied between 0.174 and 0.243 µm/µm3, and therefore is three times larger than the corresponding value for human femoral midshaft osteons. The spatial heterogeneity of the network was found distinctly more pronounced across the cortex than along the cortex. We found that in regions with a dense network, the LCN conserves its largely tree-like character, but increases the density by including shorter canaliculi. The current study on healthy mice should serve as a motivating starting point to study the connectome of genetically modified mice, including models of bone diseases and of reduced mechanoresponse.

Reconstruction of Segmental Bone Defect in Canine Tibia Model Utilizing Bi-Phasic Scaffold: Pilot Study.

The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone scaffolds with seeded cells and/or growth factors to regulate osteogenesis and angiogenesis. However, these therapies face inherent issues related to immunogenicity, tumorigenesis, bioactivity, and off-the-shelf transplantation. The biogenic micro-environment created by implanted bone grafts plays a crucial role in initiating the bone regeneration cascade. To address this, a highly porous bi-phasic ceramic synthetic bone graft, composed of hydroxyapatite (HA) and alumina (Al), was developed. This graft was employed to repair critical segmental defects, involving the creation of a 2 cm segmental defect in a canine tibia. The assessment of bone regeneration within the synthetic bone graft post-healing was conducted using scintigraphy, micro-CT, histology, and dynamic histomorphometry. The technique yielded pore sizes in the range of 230-430 µm as primary pores, 40-70 µm as secondary inner microchannels, and 200-400 nm as tertiary submicron surface holes. These three components are designed to mimic trabecular bone networks and to provide body fluid adsorption, diffusion, a nutritional supply, communication around the cells, and cell anchorage. The overall porosity was measured at 82.61 ± 1.28%. Both micro-CT imaging and histological analysis provided substantial evidence of robust bone formation and the successful reunion of the critical defect. Furthermore, an histology revealed the presence of vascularization within the newly formed bone area, clearly demonstrating trabecular and cortical bone formation at the 8-week mark post-implantation.

Gerdy's tubercle as a novel anatomical landmark for the proximal tibial cut in total knee arthroplasty.

OBJECTIVES: This study aimed to explore the use of Gerdy's tubercle (GT) as an innovative and dependable anatomical landmark for the proximal tibial cut in total knee arthroplasty (TKA) in cases with extensive knee degeneration. MATERIALS AND METHODS: One hundred dry tibia bones and 10 formalin-fixed cadaveric knee specimens of both sexes were examined. A Zimmer NexGen tibial cutting guide and a Mitutoyo digital caliper were utilized to align the guide with the tibia's mechanical axis. The procedure was replicated on cadaver knees using a standardized medial parapatellar arthrotomy approach. Measurements included the distance from GT superior border to the resection line and the length of the tibia. A radiological study involving magnetic resonance imaging examinations of 48 patients, which were evaluated focusing on the upper border of GT and the least degenerated segment of the posterolateral part of the lateral tibial condyle, was conducted. RESULTS: Anatomical measurements of GT and proximal tibial areas in 110 specimens showed slight but consistent variations with cadaver measurements. Magnetic resonance imaging analysis of 48 patients revealed notable sex differences in the distance between the superior border of GT and the tibia's posterolateral surface. There was also a significant negative correlation between the distance from GT to the posterolateral corner and cartilage thickness. CONCLUSION: Proper alignment in TKA is crucial for success, but identifying an extra-articular landmark for horizontal tibial resection remains challenging, particularly in severely arthritic knees. This study introduces GT as a novel anatomical landmark for TKA, offering a more reliable reference for achieving desired joint levels in knees with significant degenerative changes.

Predicting Tibia-Fibula Geometry and Density From Anatomical Landmarks Via Statistical Appearance Model: Influence of Errors on Finite Element-Calculated Bone Strain.

State-of-the-art participant-specific finite element models require advanced medical imaging to quantify bone geometry and density distribution; access to and cost of imaging is prohibitive to the use of this approach. Statistical appearance models may enable estimation of participants' geometry and density in the absence of medical imaging. The purpose of this study was to: (1) quantify errors associated with predicting tibia-fibula geometry and density distribution from skin-mounted landmarks using a statistical appearance model and (2) quantify how those errors propagate to finite element-calculated bone strain. Participant-informed models of the tibia and fibula were generated for thirty participants from height and sex and from twelve skin-mounted landmarks using a statistical appearance model. Participant-specific running loads, calculated using gait data and a musculoskeletal model, were applied to participant-informed and CT-based models to predict bone strain using the finite element method. Participant-informed meshes illustrated median geometry and density distribution errors of 4.39-5.17 mm and 0.116-0.142 g/cm3, respectively, resulting in large errors in strain distribution (median RMSE = 476-492 µÎµ), peak strain (limits of agreement =±27-34%), and strained volume (limits of agreement =±104-202%). These findings indicate that neither skin-mounted landmark nor height and sex-based predictions could adequately approximate CT-derived participant-specific geometry, density distribution, or finite element-predicted bone strain and therefore should not be used for analyses comparing between groups or individuals.

Comparison of imageless robotic assisted total knee arthroplasty and conventional total knee arthroplasty: early clinical and radiological outcomes of 200 knees.

The aim of this study was to compare the short term clinical and radiological outcomes of imageless robotic and conventional total knee arthroplasty (TKA) and to estimate the accuracy of the two techniques by analysing the outliers after TKA. We have evaluated 200 consecutive knees (158 patients), 100 knees undergoing robotic TKA, and 100 knees treated with conventional TKA. Demographic parameters like age, gender, body mass index, diagnosis and range of motion were obtained. Knee society score (KSS) and Knee society functional score (KSS-F) were used for clinical evaluation. Mechanical alignment (Hip-knee-ankle angle), proximal tibial angle (MPTA), distal femoral angle (LDFA) and tibial slope were analysed for radiological results and outliers were compared between both groups. Outliers were defined when the measured angle exceeded ± 3° from the neutral alignment in each radiological measurement on the final follow-up radiograph.The minimum follow-up was 6 months (range, 6 to 18 months). The preoperative mean HKA angle was 169.7 ± 11.3° in robotic group and 169.3 ± 7.3° in conventional group. There was significant improvement in HKA, LDFA, MPTA and tibial slope compared to the preoperative values in both the groups (p < 0.01). The number of HKA, LDFA and tibial slope outliers were 31, 29 and 37, respectively, in the conventional group compared to 13, 23 and 17 in the robotic group (p < 0.01). There was a significant improvement in the KSS and KSS-F functional scores postoperatively in both the groups (p < 0.01). However, there was no significant difference in the functional scores between the groups postoperatively (p = 0.08). This study showed excellent improvement with both imageless robotic and conventional TKA, with similar clinical outcomes between both groups. However, radiologically robotic TKA showed better accuracy and consistency with fewer outliers compared with conventional TKA.

Tibial tubercle avulsion fracture following preexisting Osgood-Schlatter disease in an adolescent: a case report.

Tibial tubercle avulsion fractures (TTAFs) are rare but typical in children and adolescents and Osgood-Schlatter disease (OSD) may be involved in their pathogenesis. However, few publications have reported the relationship between OSD and TTAF. A 16-year-old healthy male adolescent presented with pain, swelling and limited range of motion of the right knee following sudden acceleration while running. Based on the radiographic evidence, the patient was diagnosed with an avulsion fracture of the right tibial tubercle and OSD. Open reduction and internal fixation were performed using two cannulated screws and two Kirschner wires. The patient returned to preinjury activity levels at the 12-month follow-up postoperatively. This case report aimed to highlight this unique injury pattern. For patients with TTAFs, not only should the fracture be treated, but the cause of the fracture, such as OSD, should also be given appropriate treatment.

Application of ultrasound to monitor in vivo residual bone movement within transtibial prosthetic sockets.

Transtibial prosthetic users do often struggle to achieve an optimal prosthetic fit, leading to residual limb pain and stump-socket instability. Prosthetists face challenges in objectively assessing the impact of prosthetic adjustments on residual limb loading. Understanding the mechanical behaviour of the pseudo-joint formed by the residual bone and prosthesis may facilitate prosthetic adjustments and achieving optimal fit. This study aimed to assess the feasibility of using B-mode ultrasound to monitor in vivo residual bone movement within a transtibial prosthetic socket during different stepping tasks. Five transtibial prosthesis users participated, and ultrasound images were captured using a Samsung HM70A system during five dynamic conditions. Bone movement relative to the socket was quantified by tracking the bone contour using Adobe After-Effect. During the study a methodological adjustment was made to improve data quality, and the first two participants were excluded from analysis. The remaining three participants exhibited consistent range of motion, with a signal to noise ratio ranging from 1.12 to 2.59. Medial-lateral and anterior-posterior absolute range of motion varied between 0.03 to 0.88 cm and 0.14 to 0.87 cm, respectively. This study demonstrated that it is feasible to use B-mode ultrasound to monitor in vivo residual bone movement inside an intact prosthetic socket during stepping tasks.