EFFECT OF LOW-LEVEL DIODE LASER ON DENTIN TOPOGRAPHY AND SYMPTOMATIC NONCARIOUS CERVICAL LESIONS PRIOR TO COMPOSITE RESTORATIONS: A SPLIT-MOUTH RANDOMIZED CONTROLLED TRIAL.

OBJECTIVES: This study assessed alterations in sensitivity among symptomatic noncarious cervical lesions (NCCLs) following the application of 3 low-level diode laser wavelengths before composite restoration. It analyzed the changes in dentin topography using a scanning electron microscope (SEM). MATERIALS AND METHODS: Nine patients with 36 NCCLs were randomly assigned intra-individually to 4 groups based on the laser wavelength: laser simulation, 445 nm, 660 nm, and 970 nm. Cavity preparation, irradiation, and composite restoration were performed for each lesion. Sensitivity to cold stimuli was recorded using a visual analog scale (VAS) before the intervention (baseline) and at 1 day, 14 days, 1-, 3-, and 6-month. Pulp sensibility was recorded using an electrical pulp tester (EPT) at baseline, before treatment, and at 3- and 6-month. Additionally, an in vitro examination was performed on 12 extracted human molars to yield 12 dentin discs. Each disc was randomly divided into 4 quadrants to receive the same laser wavelengths to determine the diameters of the tubules using SEM. Results were analyzed statistically for clinical studies by the Friedman test, while ANOVA (RM-ANOVA) was conducted in-vitro, followed by the Bonferroni test in the case of significance (P < .05). RESULTS: VAS readings decreased across all groups, with a significant decrease observed for 660 nm and 970 nm from 14 days to 6-month, while at 445 nm there was a significant decrease at 6-month compared to the control (P < .05). EPT showed a significant decrease in pain threshold levels at 660 nm and 970 nm at 3- and 6-month, while 445 nm showed a significant decrease at 6-month compared to the control (P < .05). The mean tubular diameter at 445 nm decreased, with no significant difference from the control, whereas a significant decrease was found at 660 nm and 970 nm compared to the control (P < .05). CONCLUSIONS: Prior to composite restoration in symptomatic NCCLs, diode lasers with a wavelength of 660 nm showed the highest reduction in sensitivity, followed by 970 nm, whereas 445 nm diode lasers showed the least reduction. Additionally, diode lasers with wavelengths of 660 and 970 nm reduced the width of the dentinal tubules (DT) without inducing melting, as viewed under SEM.

Biometric analysis of furcation area of molar teeth and its relationship with instrumentation.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Root surface roughness evaluation following application of different periodontal instruments and Er:YAG laser: A profilometry and SEM study.

AIM: The aim of the present study was to evaluate the efficacy of 30°-angled Er:YAG laser tip and different periodontal instruments on root surface roughness and morphology in vitro. METHODS: Eighteen bovine teeth root without carious lesion were decoronated from the cementoenamel junction and seperated longitidunally. A total of 36 obtained blocks were mounted in resin blocks and polished with silicon carbide papers under water irrigation. These blocks were randomly assigned into 3 treatment groups. In Group 1, 30°-angled Er:YAG laser (2.94 µm) tip was applied onto the blocks with a 20 Hz, 120 mJ energy output under water irrigation for 20 s. In Groups 2 and 3, the same treatment was applied to the blocks with new generation ultrasonic tip and conventional curette apico-coronally for 20 s with a sweeping motion. Surface roughness and morphology were evaluated before and after instrumentation with a profilometer and SEM, respectively. RESULTS: After instrumentation, profilometric analysis revealed significantly higher roughness values compared to baseline in all treatment groups(p < 0.05). Laser group revealed the roughest surface morphology followed by conventional curette and new generation ultrasonic tip treatment groups (p < 0.05). In SEM analysis, irregular surfaces and crater defects were seen more frequently in the laser group. CONCLUSION: Results of the study showed that the use of new generation ultrasonic tip was associated with smoother surface morphology compared to 30°-angled Er-YAG laser tip and conventional curette. Further in vitro and in vivo studies with an increased sample size are necessary to support the present study findings.

Cervical wear pathobiology by robot-simulated 3-year toothbrushing - New methodological approach.

OBJECTIVES: An ex-vivo study was aimed at (i) programming clinically validated robot three-year random toothbrushing, (ii) evaluating cervical macro- and microwear patterns on all tooth groups of different functional age, (iii) documenting and codificating wear related morphological features at the cemento-enamel junction in young teeth and on roots in older teeth. DESIGN: Following ethical approval random toothbrushing (44 strokes per tooth horizontally, rotating, vertically; 2x/d) with manual toothbrushes and low-abrasive dentifrice was performed in an artificial oral cavity with brushing-force 3.5 N on 14 extracted human teeth. Morphological features were examined by SEM at baseline and after simulated 3 years using the replication technique. 3D-SEM analyses were carried out with a four-quadrant back scattered electron detector. Wilcoxon-Mann-Whitney-test was used for statistical analyses. RESULTS: 3-year random toothbrushing with horizontal, rotating and vertical brushing movements revealed morphological features classified as four enamel patterns, one dentin pattern and three cervical patterns. Negative impacts were enamel, cementum and dentin loss. Positive impact on oral health was removing dental calculus and straightening cervical traumatic and iatrogenic damages. The volume loss varied from x̅=34.25nl to x̅=87.75nl. Wear extended apically from 100 to 1500 micrometres. CONCLUSION: Robot simulated toothbrushing in an artificial oral cavity, with subsequent SEM and 3D-SEM assessment, elucidated both negative and oral health-contributing micromorphology patterns of cervical wear after simulated 3-year random toothbrushing. Cervical macro- and microwear of cementum revealed, for the first time, what we describe as overhanging enamel peninsulas and enamel islands on roots in young teeth, but no enamel islands on roots from older teeth after root cementum loss. In contrast, many older teeth exhibited enamel peninsulas.

Investigation of the presence of Non-carious cervical lesions (NCCLs) in ancient adult skulls: analyzing data from prehistoric and historical samples through a systematic review and meta-analysis.

OBJECTIVES: Historically, the prevalence of caries has undergone significant changes, particularly increasing with the industrialization of sugar consumption. When examining ancient populations, lower caries rates are discovered, attributed in part to dietary factors. These populations consumed abrasive foods, leading to occlusal wear and reduced non-axial occlusal forces, potentially influencing Non-Carious Cervical Lesions (NCCLs). Although some attribute NCCLs to abfraction, the mechanism remains debated. This systematic review aims to evaluate the presence of NCCLs in ancient populations, shedding light on the factors contributing to their occurrence. MATERIALS AND METHODS: The present systematic review was registered on PROSPERO, and the manuscript was prepared following PRISMA guidelines. RESULTS: After the literature search and article screening, data from 6 studies were included in the meta-analysis, with only 2 reporting NCCLs in ancient skulls, encopassing 17 subjects in 805 examined skulls, suggesting their presence even before the widespread use of toothbrushes. This finding indicates a potential etiopathogenic mechanism linked to abfraction, but the cause is complex and involves abrasive and erosive factors closely tied to dietary habits. CONCLUSIONS: In summary, NCCLs were present in ancient populations, albeit with a much lower prevalence. Their occurrence cannot be solely attributed to wear mechanisms but must be connected to abrasive factors related to diet or practices with religious and cultural significance, such as the use of labrets. CLINICAL RELEVANCE: Th the knowledge of NCCLs presence in acient sculls is crucial today for better understand the associated risk factors. In this context, the analysis of ancient skulls allows us to discern the role that tooth brushing and diet played in the formation of NCCLs, over the past century.

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography.

OBJECTIVES: The aim of this study is prognostic assessment of surface smoothness and the presence of internal bubbles after treatment of non-cancerous cervical lesions (NCCLs) using optical coherence tomography (OCT). METHODS: After treatment with NCCLs, cross-sectional images of the lesion parts of the sample were non-invasively acquired and analyzed. The surface smoothness between tooth and resin, resin and cemento-enamel junction, and the presence bubble inside resin was confirmed. In addition, using an algorithm that distinguishes between resin and dental structure based on OCT cross-sectional images, we quantitatively analyzed the amount of resin used in treating NCCLs and acquired 3D images. RESULTS: The inner structure of the resin in each sample was checked, and the presence of bubbles was confirmed. In addition, the resin sections were separated from the tomographic images acquired by OCT to visualize 3D images. The volume of resin used in the treatment part of each NCCLs samples was quantitatively analyzed as 3.7216 ∼ 14.889 mm3. CONCLUSIONS: OCT is able to measure not only the surface abrasion provided by existing intraoral scanner, but also the size and depth location of interal bubbles, which is distinctive advantage of our method. Based on our results, OCT is a significant tool for qualitative and quantitative analysis of dental NCCLs treatment before and after treatment. CLINICAL SIGNIFICANCE: The study used OCT, a non-destructive diagnostic, to reveal the structure of the resin and the location and size of bubbles after NCCLs treatment. These findings could be golden standard in determining the prognosis of NCCLs treatment.

Salivary factors associated with noncarious cervical lesions: A systematic review.

OBJECTIVE: This study aimed to carry out a systematic review of observational studies searching the association between salivary factors (amount and quality of saliva) and noncarious cervical lesions (NCCL) in individuals with permanent dentition. DESIGN: Cross-sectional, case-control, and cohort studies performed in humans with permanent dentition (population) and considering noncarious cervical lesions (outcome) in association with salivary characteristics (exposure) were included. PubMed, Web of Science, Cochrane, LILACS/BBO, Scopus, Embase, IBCT, NICE, OpenGrey, and Google Scholar were searched, with no language or date restrictions. Of 6561 potentially eligible studies, 142 were selected for full-text analysis. Three reviewers independently selected the studies, performed data extraction, and quality analysis through the Newcastle-Ottawa Scale. RESULTS: Finally, ten references were included in the review, four case-control and six cross-sectional studies. Several salivary parameters were evaluated. Some parameters were considered associated with the presence of noncarious cervical lesions: salivary buffering capacity, salivary pH, citric acid, and calcium and potassium levels. The methodological quality varied across studies, with high heterogeneity among them. CONCLUSIONS: Some associations between saliva and NCCL suggesting protective factors and others risk factors were found. However, the evidence is sparse and comes from a few studies with great heterogeneity. New scientific evidence, with standardized methods, should be encouraged. Understanding salivary parameters that influence the occurrence of NCCL is important to guide dentists in relation to etiological factors that could potentially be neglected. The results may help in the development of new and early diagnostic methods and treatments for noncarious cervical lesions.

Sixty-month comperative evaluation of a glass hybrid restorative and a composite resin in non-carious cervical lesions of bruxist individuals.

OBJECTIVE: To compare the clinical performance of a glass hybrid (GH) restorative and a nano-ceramic composite resin (CR) in the restoration of non-carious cervical lesions (NCCLs) of bruxist individuals in a 60-month randomized clinical trial. MATERIALS AND METHODS: Twenty-five bruxist candidates having NCCLs were recruited in this clinical study. The depth, height (cervico-incisal), width (mesio-distal), internal angles of the NCCLs, degree of tooth wear (TWI) and gingival index (GI) were measured. One hundred-and-forty-eight NCCLs were restored either with a GH restorative (Equia Forte Fil) or a CR (Ceram.X One Universal). Modified USPHS criteria was used to evaluate restorations after 1 week and 12, 24, 36 and 60 months. Pearson's Chi-Square, Fisher's Exact and Cochran Q tests were run for analysis. Survival rates of the restorations were compared with Kaplan-Meier analysis (p < 0.05). RESULTS: After 60 months, 97 restorations in 15 patients were examined. The recall rate was 60.0%. Retention rates were 73.5% for CR and 66.7% for GH. A total of 29 restorations were lost (13CR (26.5%), 16GH (33.3%)). There was not a significant difference between tested restoratives in retention (p = 0.464), marginal adaptation (p = 0.856) and marginal discoloration (p = 0.273). There was no relationship between internal angle, depth, height or width and retention of the GH or CR restorations (p > 0.05). The increase in retention loss and marginal discoloration of both restorations over time were significant (p < 0.001). Sensitivity or secondary caries were not detected after 60 months. CONCLUSION: GH and nano-ceramic CR showed similar clinical performances in NCCLs after 60 months in patients with bruxism. CLINICAL SIGNIFICANCE: After 60 months, CR and GH materials showed clinically acceptable performances in restoration of NCCLs in patients with bruxism.

Clinical performance of preheating thermoviscous composite resin for non-carious cervical lesions restoration: A 24-month randomized clinical trial.

OBJECTIVES: This 24-month, double-blind, split-mouth randomized clinical trial aimed to compare the retention rates of a preheated thermoviscous composite resin (PHT) compared to a non-heated composite resin (NHT) in non-carious cervical lesions (NCCLs). METHODS: A total of 120 restorations were restored on NCCLs using a preheated (VisCalor bulk, Voco GmbH) and a non-heated (Admira Fusion, Voco GmbH) composite resins with 60 restorations per group. A universal adhesive in the selective enamel conditioning was applied. In the PHT group, composite was heated at 68 °C for using a bench heater. In the NHT group, no heating was employed. Both restorative materials were dispensed into caps and inserted into the NCCLs. The restorations were evaluated at baseline, 6, 12, 18, and after 24 months of clinical service using the FDI criteria. Statistical analysis was performed with Kaplan-Meier estimation analysis for retention/fracture rate and Chi-square test for the other FDI parameters (α=0.05). RESULTS: After 24 months 108 restorations were assessed. Seven restorations were lost (two for PHT group and five for NHT group), and the retention rates (95 % confidence interval [CI]) were 96.7 % (81.5-99.9) for PHT group and 90.8 % (81.1-96.0) for NHT group, with no statistical differences between them (p > 0.05). The hazard ratio (95 % CI) was 0.52 (0.27 to 1.01), with no significant difference within groups. In terms of all other FDI parameters that were assessed, all restorations were deemed clinically acceptable. CONCLUSIONS: Both composites showed high rates of retention rates after 24 months. CLINICAL SIGNIFICANCE: The clinical performance of the new preheated thermoviscous was found to be as good as the non-heated composite after 24-month of clinical evaluation in non-carious cervical lesions. REGISTRATION OF CLINICAL TRIALS: RBR-6d6gxxz.

Effects of occlusal wear on 16-year progression of non-carious cervical lesions-Results of the study of health in Pomerania (SHIP-START).

BACKGROUND: It is still discussed whether occlusal wear (OW) affects the formation of non-carious cervical lesions (NCCLs). OBJECTIVE: To estimate effects of OW on the presence and development of NCCLs, using 16-year follow-up data from a cohort study. METHODS: Occlusal and cervical defects were measured in 728 cast models (one from the upper jaw and one from the lower jaw) of 364 participants. Adjusted mixed-effects ordinal logistic models analysing estimated cross-sectional (N = 1308 teeth/291 subjects) and longitudinal (N = 718 teeth/226 subjects) associations of OW with NCCLs using tooth level data. RESULTS: OW size was cross-sectionally (OR = 1.74; 95% CI: 1.27-2.38 for OW size; OR = 0.97; 95% CI: 0.94-0.99 for squared OW size), but not longitudinally (OR = 1.14; 95% CI: 0.99-1.30) associated with odds of higher NCCL sizes. For cross-sectional analyses, predicted probabilities of an NCCL size of 0 decreased from about 0.996 to 0.010 for OW sizes of 0 to 25. CONCLUSION: Results suggest an association between OW and NCCL size. However, as longitudinal results were non-significant, while consistent in direction, large-scaled cohort studies are demanded to more precisely estimate effect strength.

Pericervical Dentin Metrics in Mandibular First Molars Determined with Digital Periapical Radiography and Cone-beam Computed Tomography.

INTRODUCTION: Pericervical root dentin is decisive for the long-term mechanical integrity of root-filled teeth. Current treatment protocol does not include a customized step to determine the pretreatment residual pericervical root dentin. OBJECTIVE: To determine and compare the residual root dentin and canal width using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT) at the apical limit of the pericervical area (PCA) in mandibular first molars. METHODS: DPR and CBCT images of 60 patients with age between 22 and 76 years were used to determine (a) the mesiodistal widths of the root canal (pericervical dimensions [PCL]-C) and the root (PCL-R) of mandibular first molars at the apical limit of the PCA and (b) the intracanal distance from the apical limit of the PCA to the radiographic apex (intracanal distance [ICD]). The correlation between the PCL and ICD measurements obtained from DPR and CBCT were evaluated. RESULTS: Values between 0.10-0.80 mm and 0.00-1.10 mm were obtained for PCL-C using DPR and CBCT respectively (95% CI). The PCL values between 0.90-2.30 mm and 0.00-2.30 mm were obtained from DPR and CBCT respectively (95% CI). The ICD ranged between 4.6-12.3 mm in DPR and 4.40-12.0 mm in CBCT (95% CI). The comparative analysis showed differences from -0.9 to 0.5 mms for PCL and -2.00 to 1.5 mms for ICD between DPR and CBCT techniques respectively. CONCLUSION: The PCL and ICD determined from DPR and CBCT provided the pericervical dentin metrics that could be utilized clinically as a guideline for decision-making in endodontic treatment.

Cervical enamel projections from a periodontal perspective: A scoping review.

Cervical enamel projections (CEPs) represent a unique developmental and anatomical anomaly wherein the enamel structure extends apically beyond the cemento-enamel junction of the tooth. In this scoping review, the existing literature on CEPs was evaluated to delineate their characteristics, prevalence, predilection for specific teeth and surfaces, clinical significance, and management approaches. Searches were conducted on MEDLINE (PubMed), Cochrane Library, and Embase databases using the keywords "enamel projection(s)" or "ectopic enamel." In total, 24 studies meeting inclusion criteria were included in the review. The prevalence of CEPs varied widely (8.3%-85.1%), predominantly manifesting as grade I or grade III. Mandibular first and second molars exhibited a higher incidence of CEPs, with a notable predilection for buccal surfaces. The consensus in most studies was that CEPs are associated with localized periodontal diseases. Recommendations inclined toward the removal of ectopic enamel during periodontal surgery to enhance periodontal attachment formation. However, decision-making should involve careful consideration of the benefits and drawbacks based on individual circumstances.

Prolonged application time effects on universal adhesives in non-carious cervical lesions: An 18-month split mouth randomized clinical trial.

OBJECTIVE: This double-blind, split mouth randomized clinical trial aimed to assess the clinical performance of Clearfil Universal Bond Quick (CBUq) universal adhesive under different application times (no waiting and waiting) compared to Clearfil SE Bond adhesive in non-carious cervical lesions (NCCLs) over 18 months. METHODS: One hundred and eighty-three restorations were distributed randomly into three groups based on the adhesive system and waiting time: CUBq without waiting time (CUBq-NW), CUBq with a 20 s waiting time (CUBq-W), and CSE with a 20 s waiting time. After placement, restorations were evaluated after 18 months using the International Dental Federation (FDI) and United States Public Health Service (USPHS) criteria. Statistical analyses involved Friedman repeated measures analysis of variance and Wilcoxon tests, with a significance level set at 5 %. RESULTS: Over the 18-month period, no restorations were lost across the tested groups. Marginal adaptation evaluation indicated minor discrepancies in 21 restorations (8 CUBq-NW, 6 CUBq-W, and 7 CSE). There were no significant differences observed among the three groups following the 18-month clinical assessment (p > 0.05). Only two restorations showed marginal discoloration after 18 months (1 CUBq-NW and 1 CSE). CONCLUSIONS: The application of Clearfil Universal Bond Quick using either the "waiting" or "no-waiting" technique exhibited excellent clinical results in NCCLs during the 18-month follow-up period, demonstrating comparable performance to Clearfil SE Bond in all assessed outcomes. CLINICAL SIGNIFICANCE: The findings suggest that the new universal adhesive applied using the no-waiting technique demonstrates promising clinical performance when compared to conventional application methods. TRIAL REGISTRATION: ClinicalTrials.gov identifer RBR-69p7mpr.

Prevalence and Characterization of External Cervical Resorption Using Cone Beam Computed Tomography.

INTRODUCTION: The aim of this study was to assess the prevalence of external cervical resorption (ECR) and characterize the cases of ECR using cone beam computed tomography (CBCT). METHODS: High-resolution CBCT scans of 6216 patients (2280 males and 3936 females), consecutively acquired during the period July 2021 to March 2022, were analyzed. Identified cases of ECR were characterized by 3 evaluators regarding lesion height, circumferential spread, portal of entry proximity to root canal, stage, location, and width. RESULTS: In a total of 38 patients and 40 teeth, ECR cases demonstrated an incidence of 0.61%. The median age of the patients was 39 years. Prevalence of ERC was 0.78% among males and 0.50% among females. The most affected teeth were the maxillary incisors and canines. The most frequent characteristics of the lesion were: extension up to the cervical third (47.5%), more than 270° circumferential spread (42.55%), probable pulpal involvement (57.5%), progressive stage (65%), supracrestal (52.1%) and mesial (34.7%) localization of >1 mm in size (52.1%) portals of entry. Cases with greater longitudinal involvement also showed greater circumferential progression (P = .008). There was no association between portal of entry location and bone crest or ECR reparative phase (P = .42). Inter-rater agreement ranged from good to very good. No association between portal of entry and ECR progression was observed. CONCLUSIONS: ECR showed low prevalence in the Brazilian population, affecting mostly anterior maxillary teeth of patients within a wide age range. CBCT allowed characterization of ECR lesions with good interobserver agreement.

Prolonged polymerization of a universal adhesive in non-carious cervical lesions: 36-month double-blind randomized clinical trial.

OBJECTIVE: To evaluate the effect of prolonged (P) polymerization time of a universal adhesive system applied in etch-and-rinse (ER) or self-etch (SE) strategies on the clinical performance of restorations in non-carious cervical lesions (NCCLs), after 36 months of clinical service. METHODS: A total of 140 restorations were randomly placed in 35 subjects according to the polymerization time groups: ER (10 s); ER-P (40 s); SE (10 s); and SE-P (40 s) at 1,200 mW/cm2. Composite resin was placed incrementally. The restorations were evaluated immediately and after 6, 12, 18, and 36 months using the FDI criteria. Data were analyzed using the Kaplan-Meier survival test for retention loss, and the Kruskal-Wallis' test for secondary outcomes (α = 0.05). RESULTS: After 36 months, 19 restorations were lost: ER 6, ER-P 2, SE 9, SE-P 2. The retention rates were 82.3% for ER; 94.1 % for ER-P; 73.5 % for SE; and 94.1 % for SE-P, with a significant difference between ER vs. ER-P and SE vs. SE-P, as well as ER vs. SE-P and ER-P vs. SE (p < 0.0001). Minor defects were observed in 18 restorations for the marginal staining criteria: ER 5, ER-P 2, SE 8, SE-P 3; and in 33 restorations for the marginal adaptation criteria: ER 11, ER-P 4, SE 12, and SE-P 6 (p > 0.05). No restorations showed recurrence of caries or postoperative sensitivity. CONCLUSIONS: A prolonged polymerization time of 40 s improves the clinical performance of the universal adhesive for both adhesive strategies evaluated, even after 36 months. CLINICAL SIGNIFICANCE: Prolonging the polymerization time of a universal adhesive from 10 to 40 s has been shown to improve its clinical performance when used in NCCLs.

Age and sex related change in tooth enamel thickness of maxillary incisors measured by cone beam computed tomography.

BACKGROUND: To measure adequate enamel thickness of maxillary incisors in planning enamel reduction for a porcelain laminate veneer restoration in relation to chronological age and sex by using cone beam computed tomography (CBCT) in an Iraqi subpopulation. METHODS: From 81 CBCT images, 324 maxillary incisors were examined. Enamel thickness was measured at both mesial and distal regions of the tooth in three different levels: cervical, middle, and incisal (occlusal) 1/3 at a sagittal section. Measurements were made for the following tooth areas using CBCT: facial enamel thickness at 1, 3, and 5 mm from the cementoenamel junction (CEJ), palatal enamel thickness at 5 mm from the CEJ (5 mm P), facial and palatal enamel thickness at the incisal edge (IFP), mid incisal enamel thickness (IET), and the incisal edge enamel-pulp distance (IEPD). Relationships of enamel thickness with age and sex were evaluated using Independent t-test, Mann-Whitney U-test and the Pearson correlation coefficient, a simple linear regression analysis used for statistical analysis. RESULTS: Significant differences (P < 0.05) were found in terms of an inverse association between enamel thickness and chronological age at all measurements above the CEJ and the regression model for the mid-incisal enamel thickness was (R2 of 0.4). In contrast, there was an increase in IFP, palatal, and IPED enamel thickness with age. Also, significant differences were found in enamel thickness between males and females, the enamel being thicker in females in relation to facial enamel thickness, enamel palatal thickness above CEJ and IET, while for IEPD, the enamel thickness was greater in males compared to females. CONCLUSION: The measurements for enamel thickness outcome variables in relation to chronological age revealed significant differences for each measured distance and there were statistically significant differences in enamel thickness between males and females at all measurements except at IFP. These results demonstrate that CBCT can be used for noninvasive, accurate measurements of enamel thickness in both sex.

Anatomical and Histological Characteristics of Prematurely Erupted Teeth in Newborns.

Purpose: To assess the characteristics of dental hard and soft tissue structures of prematurely erupted teeth in newborns. Methods: Extracted natal and neonatal teeth were assessed in ground sections for evaluation of enamel, dentin, dentino-enamel junction and cementoenamel junction. Soft tissue harvested was histologically analyzed for cellularity, vascularity and other characteristics of the dental pulp. Results: This study included 15 teeth from nine neonates, of which seven erupted at birth, eight erupted within the first month of birth. All erupted in the mandibular anterior region. The demineralized ground section revealed enamel cracks, a straight dentinoenamel junction, and S-shaped dentinal tubules along with the enamel lamellae, and enamel spindle. None of the samples showed enamel tuft or cementum. Histology of soft tissue revealed enhanced cellularity, vascularity without any fibrosis, calcification and inflammation when compared with the young healthy pulp in permanent teeth. Conclusion: The prematurely erupted teeth in newborns were almost exclusively rootless and exhibited the characteristic anatomical findings pertaining to enamel, dentin, dentinoenamel junction and cementoenamel junction. The histology of their dental pulp was characterized by increased cellularity and vascularity compared.

Evaluating the prospective crown-root ratio after extrusion and crown lengthening procedures in vitro.

For restoration of extensively damaged teeth preprosthetic treatment measures are necessary. Crown lengthening and extrusion affect the prospective crown-root ratio (CRR). The subject of this in vitro study was to compute CRRs for both treatment approaches. 120 human maxillary central extracted incisors were measured. Measurements were calculated for five treatment groups: C (control), E-2 mm (extrusion of 2 mm), E-4 mm (extrusion of 4 mm), CL-2 mm (crown lengthening of 2 mm), and CL-4 mm (crown lengthening of 4 mm). Tooth (TL), root (RL), and crown lengths (CL) were measured from mesial (m) and facial (f) cemento-enamel junction (CEJ), and respective anatomic (CRR) and effective crown-root ratios (eCRR) were calculated. Following CRR values were computed for C: CRR-m = 0.4 ± 0.1, CRR-f = 0.7 ± 0.1. All crown-root ratios were lower (more favourable) for extrusion compared to crown lengthening (p < 0.001). ECRRs were higher than anatomic CRRs. CRR at mesial CEJ was significantly lower than CRR with facial CEJ as reference (p < 0.001). Mesial measurement-based calculations of CRR typically based on radiographic images should be interpreted with caution as they underestimate the eCRR. CRR can be expected as lower, i.e. more favourable, when teeth are extruded than crown lengthened.

Restorations of Class II Cavities Evaluated for Marginal Leakage When Restored with Composites or a Giomer Using Different Bonding Agents.

PURPOSE: To evaluate the marginal leakage of three different types of bonding agents used with two posterior composites and a giomer, available commercially. MATERIAL AND METHODS: Class II box-only cavities were prepared on 90 mandibular first molars with margins extending 1 mm beyond the cementoenamel junction. The samples were divided into nine groups based on three different bonding agents, two different composites, and a giomer. Cavities were restored per the manufacturer's description. Teeth were subjected to a thermocycling procedure (500×, 5°C to 55°C) and dye penetration by immersing in a 2% methylene blue solution (Merck Specialties) for 24 hours. The marginal adaptation was evaluated as a continuous margin at the gingival level under a stereomicroscope. The results were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. RESULTS: The results of the groups with the total-etch technique showed no statistical difference between the nanohybrid Filtek Z250 XT (3M ESPE) and fine hybrid SwissTEC composite (Coltène\Whaledent AG). The groups with the self-etch technique showed no statistical difference when used with either of the two composites. The acid-etch technique showed better marginal adaptation than the self-etch technique. When the giomer (Beautifil II, Shofu) was used with the total-etch technique, it showed better adaptation than when used with the self-etch technique but overall showed more marginal leakage than the composites. CONCLUSION: The total-etch technique provided better marginal adaptation for the composites and giomer compared to the self-etch technique. CLINICAL SIGNIFICANCE: The demand for esthetic restorations continues to increase, and composite restorations are now considered the material of choice for Class II cavities. There are various concerns with composite restorations, one of them being good marginal adaptation to increase the life of the restoration. This study evaluated marginal leakage with the nanohybrid composite Filtek Z250 XT, fine hybrid composite SwissTEC, and a giomer when used with the total-etch technique and self-etch technique and reported satisfactory adaptation with the total-etch technique.

Clinical and radiographic features of external cervical resorption - An observational study.

AIM: To determine the prevalence of symptoms, clinical signs and radiographic presentation of external cervical resorption (ECR). METHODOLOGY: This study involved 215 ECR lesions in 194 patients referred to the Endodontic postgraduate Unit at King's College London or Specialist Endodontic practice (London, UK). The clinical and radiographic findings (periapical [PA] and cone beam computed tomography [CBCT]) were readily accessible for evaluation. A checklist was used for data collection. Inferential analysis was carried out to determine if there was any potential association between type and location of tooth in the jaw as well as sex, age of the patient and ECR presentation and radiographic feature. RESULTS: Eighty-eight patients (94 teeth) were female and 106 patients were male (121 teeth), the mean age (±SD) was 41.5 (±17.7) years. Fifteen patients (7.7%) had more than one ECR lesion. The most affected teeth were maxillary central incisors (21.4% [46 teeth]) and mandibular first molars (10.2% [22 teeth]). ECR was most commonly detected as an incidental radiographic finding in 58.1% [125 teeth] of the cases. ECR presented with symptoms of pulpal/periapical disease in 23.3% [n = 50] and clinical signs (e.g. pink spot, cavitation) in 16.7% [36 teeth] of the cases. Clinical signs such as cavitation (14%), pink spot (5.1%) and discolouration (2.8%) were uncommon, but their incidence increased up to 24.7% when combined with other clinical findings. ECR was detected in the resorptive and reparative phases in 70.2% and 29.8% of the cases respectively. CONCLUSION: ECR appears to be quiescent in nature, the majority being asymptomatic and diagnosed incidentally from PA or CBCT. When assessed with the Patel classification, most lesions were minimal to moderate in relation to their height (1 or 2) and circumferential spread (A or B). However, the majority of ECRs were in (close) proximity to the pulp. Symptoms and clinical signs were associated with (probable) pulp involvement rather than the height and circumferential spread of the lesion. Clinical signs were more frequently associated when ECR affected multiple surfaces.