Pilot clinical study to evaluate the efficacy of a professionally delivered high fluoride varnish on erosive tooth wear in an in-situ model.

OBJECTIVES: The aim for this pilot study was to investigate the effect of a sodium fluoride varnish on step height measured by a profilometer from human enamel worn by healthy volunteers with a novel in situ/ex vivo erosion design. METHOD: Healthy volunteers aged 18-70 years wore a palatal splint containing 8 human enamel samples and underwent two 3-day treatment periods for 6 h a day with a varnish containing sodium fluoride at 22,600 ppm and the control with the same ingredients but without fluoride. Each splint contained 4 polished and 4 unpolished samples. The interventions were applied to the surface of the enamel samples in randomised order, removed after 6 h, then immersed ex-vivo in 1 %, pH 2.7 citric acid for 2 min, repeated 4 times a day, over 2 days. Measurements of enamel were assessed blindly by microhardness on day 2 and by non-contact laser profilometry on day 3 for the two treatments. RESULTS: 24 volunteers, 2 males and 22 females aged 27-54 years, were screened and recruited. The delta microhardness, from polished samples removed at the end of day 2, for the control and fluoride treatment was 95.7 (22.9) kgf/mm2 and 123.7 (28.9) kgf/mm2, respectively (p < .005). The mean (SD) step height for the control polished enamel surfaces was 3.67 (2.07) µm and for the fluoride varnish was 1.79 (1.01) µm (p < .0005). The control unpolished enamel surfaces had a mean 2.09 (1.53) µm and the fluoride varnish was 2.11 (1.53) µm but no statistical difference was detected. CONCLUSIONS: The results from this pilot study, utilizing an in-situ model where enamel was exposed to acid over the course of 2 days, demonstrated that a high fluoride varnish containing sodium fluoride at 22,600 ppm prevented erosive wear compared to a control on the polished enamel surfaces. CLINICAL SIGNIFICANCE: Intra-oral study demonstrated that a high fluoride varnish containing sodium fluoride at 22,600 ppm reduced erosive tooth wear.

Combined use of stannous fluoride-containing mouth rinse and toothpaste prevents enamel erosion in vitro.

OBJECTIVE: To compare the protective effect of commercial stannous-containing mouth rinses on enamel erosion in a simulated 5-day in vitro cycling model. MATERIALS AND METHODS: 81 human enamel specimens were embedded in resin blocks and divided into nine groups as follows; group 1: stannous fluoride (1000SnF2) toothpaste; groups 2,3, and 4 were the same as group 1 plus Elmex®, PerioMed™, and Meridol®, respectively, group 5: stannous fluoride (1450SnF2) toothpaste, groups 6, 7, and 8 were the same as group 5 plus Elmex®, PerioMed™, and Meridol®, respectively, group 9: negative control. An erosive challenge was induced with a 1 min hydrochloric acid (0.01 M, pH 2.2) treatment 3 times per day. Each cycle included immersing in the toothpaste slurry twice for two minutes and a one-minute rinse. The enamel slabs were immersed in artificial saliva between each erosive cycle and incubated overnight at 37 °C. Surface hardness loss and enamel loss were determined by Knoop surface hardness and non-contact profilometry, respectively. Finally, enamel surfaces were analyzed by scanning electron microscopy and X-ray energy dispersive spectroscopy (SEM/EDS). RESULTS: All three mouth rinses had similar protective effects against erosion when using adjunct with 1000 SnF2 toothpaste (p > 0.05). With 1450 SnF2 toothpaste, Elmex® presented significantly lower surface hardness loss than Meridol® (p < 0.05). The combined use of Elmex® or PerioMed™ with toothpaste provided significantly better erosion protection than toothpaste alone, either 1000 or 1450 SnF2. In addition, 1000SnF2 toothpaste adjunct with mouth rinse is comparable to 1450 SnF2 toothpaste alone in preventing enamel erosion. CONCLUSION: All three mouth rinses reduced enamel erosion. The additional use of a high concentration stannous containing mouth rinse with 1450 SnF2 toothpaste increases the protective effect against enamel erosion in vitro. CLINICAL SIGNIFICANCE: To date, no standard protocol for preventing dental erosion is available. There are three stannous-containing mouth rinses on the market; however, no study compared their efficacy or indicated whether using adjuncts with anti-erosion toothpaste provides additional benefits. This study found that adding stannous mouth rinse to twice-daily toothpaste increases erosion protection.

Erosion-inhibiting potential of the stannous fluoride-enriched CPP-ACP complex in vitro.

Currently available anti-erosive agents only provide partial protection, emphasizing the need to enhance their performance. By characterizing erosive enamel wear at the nanoscale, the aim of this in vitro study was to assess the anti-erosive effects of SnF2 and CPP-ACP both individually and synergistically. Erosion depths were assessed longitudinally on 40 polished human enamel specimens after 1, 5, and 10 erosion cycles. Each cycle comprised one-min erosion in citric acid (pH 3.0) and one-min treatment in whole saliva (control group) or a slurry of one of the three anti-erosive pastes (10% CPP-ACP; 0.45% SnF2 (1100 ppm F); or SnF2/CPP-ACP (10% CPP-ACP + 0.45% SnF2)) (n = 10 per group). Scratch depths were assessed longitudinally in separate experiments using a similar protocol after 1, 5, and 10 cycles. Compared with the control groups, all slurries reduced erosion depths after 1 cycle (p ≤ 0.004) and scratch depths after 5 cycles (p ≤ 0.012). The order of anti-erosive potential was SnF2/CPP-ACP > SnF2 > CPP-ACP > control for erosion depth analysis, and SnF2/CPP-ACP > (SnF2 = CPP-ACP) > control for scratch depth analysis. These data provide 'proof of concept' evidence that SnF2/CPP-ACP has superior anti-erosive potential compared to SnF2 or CPP-ACP alone.

Gels containing statherin-derived peptide protect against enamel and dentin erosive tooth wear in vitro.

The effect of gels containing a statherin-derived peptide (Stn) on the protection against enamel and dentin erosive tooth wear (ETW) in vitro was evaluated. Bovine enamel and dentin specimens were divided into 2 groups (n = 15 and 18/group for enamel and dentin, respectively) that were treated with Chitosan or Carboxymethylcellulose (CMC) gels containing Stn15pSpS at 1.88 × 10-5 M or 3.76 × 10-5 M. Chitosan or CMC gels without active ingredients served as negative controls, while chitosan gel containing 1.23% F (as NaF) and acidulated phosphate fluoride gel (1.23% F) served as positive controls. The gels were applied on the specimens for 4 min. Stimulated saliva was collected from 3 donors and used to form a 2-h acquired pellicle on the specimens. Then, the specimens were submitted to an erosive pH cycling protocol 4 times/day for 7 days (0.01 M HCl pH 2.0/45 s, artificial saliva/2 h, and artificial saliva overnight). The gels were applied again during pH cycling, 2 times/day for 4 min after the first and last erosive challenges. Enamel and dentin loss (µm) were assessed by contact profilometry. Scanning electron microscopy (SEM) was analyzed using a cold field emission. Data were analyzed by two-way ANOVA (for chitosan and CMC gels, separately) and Tukey's multiple comparison test. SEM images showed changes to enamel topography after application oft the gels containing Stn or F. Regarding CMC-based gels, for enamel, none of the treatments significantly reduced ETW in comparison with placebo; for dentin, however, gels containing Stn, regardless the concentration, significantly reduced the ETW. Moreover, Chitosan-based gels, regardless the Stn concentration, were able to protect enamel and dentin against ETW. Gels containing Stn might be a new approach to protect against ETW.

Treatment for dental erosion: a systematic review of in vitro studies.

Background: Dental erosion is a chemical loss of the mineralized dental tissue caused by exposure to nonbacterial acids. Different treatment protocols have been adopted with the use of fluoride compounds to promote the formation of a layer of mineral precipitation in eroded lesions. Aim: This systematic review aimed to evaluate the main treatments for dental erosion. Methodology: This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and recorded in the Open Science Framework database (OSF) under DOI 10.17605/OSF.IO/XMFNZ. The searches were conducted in six electronic databases (Pubmed, Embase, Web of Science, Cochrane, Scopus, Lilacs) and two grey literature sources (Google Scholar and OpenGrey). The eligibility criteria included in vitro studies that evaluated eroded teeth under treatment with some topical agent. Risk of bias assessment and qualitative synthesis were performed using the Cochrane collaboration's tool for assessing risk of bias modified for in vitro studies. Results: A total of 522 studies were identified, and only four studies that fulfilled our eligibility criteria were included in this review. Among these studies, three were considered to have a low risk of bias, and one to have a high risk of bias. Two studies evaluated the anti-erosion effect of fluoride toothpaste, and the other two assessed the action of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on the surface of human teeth. Among the products analyzed, CPP-ACP was the only one that promoted a significant increase in enamel microhardness and reduced tooth wear. Conclusion: Based on the in vitro studies included in this review, there was no anti-erosion effect after using different fluoride toothpaste. However, it should be considered that one of these studies presented a high risk of bias. On the other hand, studies with CPP-ACP showed anti-erosion efficacy when applied before or after erosive wear.

Effect of sodium hexametaphosphate and quercetin, associated or not with fluoride, on dentin erosion in vitro.

OBJECTIVE: to investigate the ability of solutions containing sodium hexametaphosphate, fluoride and quercetin, alone or in association, to prevent dentin erosion and to inhibit matrix metalloproteinases -2 and -9 activity using in vitro protocols. DESIGN: Root dentin blocks (n = 96) were prepared and divided into 8 experimental groups (n = 12/group), according to the solutions to be tested: Placebo; 0.24% sodium fluoride (F); 1.0% sodium hexametaphosphate (HMP); 0.03% quercetin (QC); F+HMP; F+QC; HMP+QC; and F+HMP+QC. Erosive challenges were performed 4×/day for 5 days. Specimens were treated with the respective solutions for one minute, twice a day. Next, dentin loss (profilometry) and integrated hardness area in depth (KHN × µm) were determined. The antiproteolytic potential was assessed by gelatin zymography. Dentin erosion results (log10-transformed) were submitted to one-way ANOVA, followed by Tukey's test. Integrated hardness area in depth data (raw) were submitted to two-way, repeated-measures ANOVA, followed by Holm-Sidak's test (p<0.05). RESULTS: Dentin erosion was significantly lower for F+HMP+QC than for all other treatments. At the shallowest depths (5-30 µm), blocks treated with F+HMP+QC had the highest integrated hardness area in depth values. All treatments completely inhibited matrix metalloproteinases-2 activity, except for the group QC (77% inhibition). For matrix metalloproteinases-9, all HMP-containing solutions or F+QC promoted total antiproteolytic activity. CONCLUSION: The association of fluoride, sodium hexametaphosphate, and quercetin must be considered a valuable strategy for novel product formulation for home and professional use, considering its superior protective effects against dentin erosion and its antiproteolytic potential.

Preventive effect of chitosan gel containing CaneCPI-5 against enamel erosive wear in situ.

OBJECTIVE: This study evaluated the preventive effect of a chitosan gel containing CaneCPI-5 against enamel erosion and erosion + abrasion in situ. METHODS: Sixteen volunteers participated in a crossover, double-blind protocol, comprising 4 phases: (1) no treatment (Nt); (2) chitosan gel (Cg); (3) chitosan gel + 12,300 ppm NaF (Cg + NaF); and (4) chitosan gel + 0.1 mg/mL CaneCPI-5 (Cg + Cane). Volunteers wore an appliance containing 4 specimens. Once/day, they applied the gel (except for Nt) (4 min/specimen). Erosive challenges were performed extra-orally (0.1% citric acid, 90 s, 4 × /day; ERO). Specimens were also abraded (toothbrush, 15 s/specimen, 2 × /day; ERO + ABR). Enamel wear was assessed by profilometry and relative surface reflection intensity (%SRI). Two-way RM-ANOVA/Sidak's tests and Spearman's correlation were used (p < 0.05). RESULTS: For profilometry, ERO + ABR promoted significantly greater wear when compared with ERO. There was a significant difference among all treatments. The lowest enamel loss occurred for Cg + Cane, followed by Cg + NaF, Cg, and Nt (p < 0.05). The %SRI was significantly lower for ERO + ABR when compared to ERO, only for the Nt group. The greatest %SRI was found for the Cg + NaF and Cg + Cane groups, which did not differ significantly, regardless of the conditions. The lowest %SRI was found for the Nt and Cg groups, which did not differ from each other, regardless of the conditions. The Nt group did not differ significantly from the Cg + NaF (ERO). There was a significant correlation between both analyses. CONCLUSION: The incorporation of CaneCPI-5 in the chitosan gel prevented erosive wear in situ. CLINICAL RELEVANCE: These results open a new perspective for the use of CaneCPI-5 in other application vehicles, such as chitosan gel.

Influence of periodic polyphenol treatment on the anti-erosive potential of the acquired enamel pellicle-A qualitative exploratory study.

OBJECTIVE: The aim of the present study was to investigate the impact of periodic polyphenol treatment on the ultrastructure and anti-erosive potential of an in-situ formed pellicle. METHODS: Subjects wore intraoral appliances with buccally and palatally fixed bovine enamel specimens. During 6 h of intraoral pellicle formation, 100 ml black tea or tannic acid was applied ex-vivo every 25 min for 5 min. Untreated pellicles served as control. After the trial, specimens were immersed in 0.1% or 1% citric acid for 60 s and analysed for calcium release with atomic adsorption spectrometry and ultrastructure with transmission electron microscopy. RESULTS: Specimens covered by pellicles treated with black tea or tannic acid released less calcium than untreated pellicles. Ultrastructural analyses reveal an increase in pellicle's thickness and density after treatment with polyphenols. CONCLUSIONS: Periodic polyphenol treatment of the pellicle modify its ultrastructure and increase its anti-erosive potential. CLINICAL SIGNIFICANCE: Consumption of polyphenolic beverages can enhance the anti-erosive potential of the enamel pellicle.

The protective effect of the experimental TiF4 and chitosan toothpaste on erosive tooth wear in vitro.

This study evaluated the protective effect of TiF4 and chitosan toothpaste on erosive tooth wear (ETW) in vitro. Enamel and dentin samples were randomly assigned to toothpastes (n = 12): (G1) TiF4 (1400 ppm F-), (G2) 0.5% chitosan (75% deacetylation, 500 mPas), (G3) TiF4 (1400 ppm F-) plus 0.5% chitosan (75% deacetylation, 500 mPas), (G4) Placebo, (G5) Erosion Protection (Elmex-GABA, 1400 ppm F-). Twelve samples were only eroded. All samples were submitted to erosive pH cycles and G1 to G5 to abrasive challenges using toothpastes' slurries plus 45 s of treatment, for 7 days. The final profile was overlaid to the baseline one for the ETW calculation (µm). The data were subjected to Kruskal-Wallis/Dunn tests. TiF4 toothpastes, regardless of the presence of chitosan, were able to significantly reduce ETW compared to placebo, while chitosan alone was similar to placebo for both tissues. The toothpastes containing TiF4 were even superior to the commercial Elmex toothpaste on enamel, while they were similar on dentin; both were also significantly different from placebo for both tissues. TiF4 and Elmex toothpastes minimized the impact of brushing on eroded surface. In conclusion, TiF4 toothpastes, regardless the presence of chitosan, showed to be effective in minimizing ETW in vitro.

Biomineralization induced by chitosan and collagen-based materials with fluoride for dentin coverage: Chemical and morphological analysis.

The prevention and treatment of erosive tooth wear are becoming increasingly important due to its increasing prevalence. The use of natural solutions to modify dental surfaces has become an area of research. Organic materials such as chitosan and hydrolyzed collagen may be a promising option to treat dentin. This in vitro study aimed to evaluate the influence of chitosan or hydrolyzed collagen, alone or combined with acidulated phosphate fluoride (APF) gel, on the composition and morphology of dentin after erosion. Bovine dentin samples were prepared (n = 84) and treated with artificial saliva (AS, negative control); APF gel (F, positive control); chitosan solution (Chi); hydrolyzed collagen solution (Col); fluoride/chitosan composition (F_Chi); and fluoride/hydrolyzed collagen composition (F_Col). Erosive cycles (six cycles of immersion in orange juice for 1 min, followed by immersion in AS for 1 hr) were performed. The materials were characterized by their morphology, composition, and particle size distribution. Micro-energy dispersive X-ray fluorescence spectroscopy and scanning electron were used to evaluate the dentin's inorganic chemical composition and morphology. The F_Col and F groups had a reduction in calcium loss by 17 and 26%, respectively (p < .001). Both of these groups still had a covering layer of agglomerates at the dentin surface after the erosive cycles. The fluoridated chitosan or collagen solutions improved the dentin resistance to erosion as a novel hybrid-fluoride-based material approach to provide surface protection from erosion.

Superimposition of sequential scans to measure erosion on unpolished and curved human enamel.

OBJECTIVES: To determine if superimposition of sequential scans can discriminate between different fluorides at step heights less than 5 µm on natural human enamel surfaces. MATERIALS AND METHODS: Natural, unpolished, human enamel specimens (n = 60) were randomly assigned to one of three pre-treatment toothpaste slurries with a calcium silicate/fluoride, fluoride-only and a control. Baseline and post treatment scans, from a non-contacting profilometer with a 0.01 µm z-axis and <1 µm lateral scanning resolution were imported into superimposition software to define change in mean 3D step height and surface roughness following erosion in 0.3% citric acid for 15 min. Statistical analysis conducted with two-way repeated measures ANOVA and post-hoc Tukey's multiple comparisons. RESULTS: Confidence and resolution of superimposition and subtraction of repeated profiles from unpolished enamel revealed accuracy within 1-2 µm. The technique was able to discriminate between the fluorides demonstrating statistical differences in mean (SD) 3D step height (µm) of 1.96 (0.40) and 2.75 (0.49) (p = 0.0024). There was a statistically significant increase in surface roughness for all groups after 15 min erosion compared to baseline. But no statistically significant difference between the interventions after 15 min erosion but there was compared to no fluoride (p = 0.006). CONCLUSION: Superimposition and subtraction of profiles could discriminate between fluoride interventions, which showed statistical differences in enamel loss differences less than 3 µm. CLINICAL SIGNIFICANCE: This erosion model and data analysis workflow was able to distinguish differences between scans of 3 µm on unpolished enamel following the interaction with fluoride.

Effect of TiF4 varnish after pre-treatment with proanthocyanidin or chlorhexidine on the progression of erosive dentin loss in the presence or absence of the demineralized organic matrix.

This study evaluated the protective effect of TiF4 varnish, after pre-treatment with proantocyanidin or chlorhexidine, on the progression of erosive dentin loss (EDL), under the presence or absence of the demineralized organic matrix (DOM). Bovine root dentin samples were eroded for 30 min (0.1% citric acid, pH 2.5) and the loss was measured by profilometry. Half of them were subjected to the DOM removal using collagenase for 4 days, while the other half remained immersed in water. The removal of DOM was checked by profilometry. Samples were divided into 24 groups (n = 15) according to the factors: 1- With or without DOM; 2- Pre-treatment with 0.012% chlorhexidine gel, 10% proanthocyanidin gel or untreated for 1 min; 3-Final Treatment with TiF4 varnish, NaF varnish, placebo varnish or untreated for 6 h. The samples were submitted to a pH cycling for 5 days: 0.1% citric acid (4 × 90s/day) and artificial saliva between the challenges. The final profile was obtained for the calculation of EDL (µm, three-way ANOVA/Tukey test). When DOM was preserved, the EDL was lower compared to the condition without DOM (7.08 ± 4.03 µm and 9.80 ± 3.79 µm, p < 0.001, respectively), regardless of the treatments. The pre-treatment had no influence on the progression of EDL (p = 0.637), while the final treatment (TiF4 varnish only, 6.77 ± 4.08 µm) was effective in reducing the progression of EDL (NaF varnish: 9.52 ± 4.02 µm; Placebo varnish: 8.64 ± 4.06 µm and no treatment: 8.80 ± 3.95 µm). It can be concluded that DOM has important protective effect on the progression of EDL. TiF4 was the unique treatment capable of reducing EDL progression, regardless of the pre-treatment of DOM.

Bioavailable gluconate chelated stannous fluoride toothpaste meta-analyses: Effects on dentine hypersensitivity and enamel erosion.

OBJECTIVES: To compare the effect of bioavailable gluconate-chelated stannous fluoride (SnF2) toothpaste with control toothpastes for treatment of dentine hypersensitivity (DH) and enamel erosion. DATA AND SOURCES: A Procter & Gamble Oral Care archive of clinical studies was reviewed from 2000 to 2020. Eligible studies were Randomised Controlled Trials (RCTs) investigating bioavailable gluconate-chelated SnF2 toothpaste efficacy compared to controls in adult participants measured following tactile (Yeaple force) and/or evaporative stimuli (Schiff score) in-vivo, duration <2 months (DH); or by erosive toothwear (profilometry) from in-situ samples, duration 10-15 days. Two authors independently assessed eligibility and resolved disagreements by discussion. A meta-analysis was undertaken and Risk of Bias (RoB) assessed using the Cochrane collaboration RoB tool for randomized parallel-group and cross-over trials. RESULTS: Fourteen RCTs (1287 participants) assessed DH relief and Six RCTs (184 participants) enamel erosion protection. For DH SnF2 toothpastes provided a 57 % (evaporative air) and 142 % (tactile) benefit versus negative controls (sodium fluoride/monofluorophosphate, 8 studies; p < 0.001). Compared to positive controls (potassium nitrate or arginine, 6 studies), a 22 % advantage (p = 0.036) was seen for evaporative air. In erosion studies, SnF2 toothpastes provided an 83 % benefit versus control toothpastes (arginine or sodium fluoride; p < 0.001) with a change (95 %CI) in average surface profilometry level (µm) of -2.02(-2.85, -1.20). CONCLUSIONS: The use of these bioavailable SnF2 toothpastes, as part of a daily oral hygiene regimen, will provide patients with enamel erosion protection, combined with alleviation of DH pain when present, improving quality of life.

Nanoencapsulated fluoride as a remineralization option for dental erosion: an in vitro study.

OBJECTIVE: To compare the in vitro performance of different dentifrices indicated for dental erosion and a new dentifrice with controlled fluoride release system (NanoF) in terms of surface microhardness remineralization in enamel erosion lesions. MATERIALS AND METHODS: 72 human enamel specimens were divided into 6 groups (n = 12): PC (100% NaF - positive control); NC (Placebo - negative control); 50%nF (50% NanoF + 50% free NaF), 100%nF (100% NanoF); PN (Sensodyne® ProNamel™) and AG (Colgate® Sensitive Pro-Relief™). A surface microhardness analysis was performed before (SH0) and after (SH1) the erosion lesion formation. The blocks were submitted to a 5-day de-remineralization cycling model, consisting of 90 s immersion on 0.1% citric acid (4x/day) and 1 min treatment with dentifrice slurries along with 1 mL/block of human saliva (2x/day). Lastly, the final surface microhardness analysis (SH2) was measured and the percentage of surface microhardness remineralization (%SMHR) was calculated. Data were analysed with 2-way ANOVA and Tukey's test (p < .05). RESULTS: Statistically significant differences were observed for SH2 and %SMHR between NC and AG with the other groups (p < .05). The best %SMHR from the experimental groups was found in 100%nF and PN. CONCLUSION: Dentifrices with NanoF exhibited a surface microhardness remineralization similar to sodium fluoride (PC). Therefore, NanoF dentifrice can be an alternative to prevent and treat patients with dental erosion.

Effect of black tea and matrix metalloproteinase inhibitors on eroded dentin in situ.

Purpose of this in situ study was to evaluate the surface properties of eroded dentin specimens activated with three different matrix metalloproteinase (MMP) inhibitors (chlorhexidine [CHX], fluoride, green tea), black tea, and water. One hundred eighty dentin samples were prepared from extracted third molars and then samples divided into six groups. Ten volunteers were carried three specimens of each group, on acrylic palatal appliances, which were fabricated exactly for them (n = 3). Erosive cycles were done by immersing appliances in cup containing Cola and was followed by rinsing with test solutions. Microhardness values were measured. Surface properties were investigated by atomic force microscopy (AFM). Lowest change in microhardness was shown in fluoride group whereas negative control group (water) had the highest change. There were no statistically significant differences among surface roughness changes (p > .05). The least change in microhardness was seen in the fluoride group (13.05 ± 8.07), while the control group showed the highest change (33.80 ± 12.42) and was statistically significant when compared to other groups (p < .05). Besides lowest depth, values were shown in fluoride group as well. AFM evaluations showed macromolecular deposits on surfaces of fluoride, CHX, and black tea groups. No superior results were detected in CHX + fluoride group and black tea showed similar surface characteristics as green tea. Mouthrinses containing not only green tea but also black tea could be beneficial for patients with exposed dentin surfaces. Catechines and theaflavins in teas could be useful for improving surface quality.

Morphological and chemical effects of in-office and at-home desensitising agents containing sodium fluoride on eroded root dentin.

OBJECTIVE: The aim of this study was to evaluate the morphological and chemical effect of in-office and at-home desensitising agents containing sodium fluoride (NaF) on eroded root dentine in vitro. METHODS: Fifty bovine dentine samples were pre-eroded and randomised into five groups (n = 10): G1 (Control) - milli-Q water; G2 - fluoride varnish containing NaF 22,500 ppm; G3 - desensitising cream containing NaF 9,000 ppm associated with 20% nanohydroxyapatite; G4 - toothpaste with NaF 5,000 ppm associated to tricalcium phosphate; G5 - toothpaste containing NaF 900 ppm and casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF). The specimens were submitted to erosive challenge for three days. The analyses were performed using non-contact profilometry for volumetric (Sa) and linear roughness (Ra) followed by scanning electron microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDS). The data were analysed by Kruskal-Wallis and Wilcoxon tests (α = 0.05). RESULTS: There was a significant reduction of Ra and Sa for the eroded samples from the G2 and G5 (p < 0.05) after an erosive challenge. The dentine surface topography pattern showed partially or totally occluded dentinal tubules after treatments, except in the control group. The control, G4 and G3 groups showed a reduction in the dentine inorganic content percentage of Ca (Calcium) and P (Phosphorus) minerals. CONCLUSION: The fluoride varnish and CPP-ACPF toothpaste were able to prevent morphological changes and were the only materials that showed the Ca and P content increased after treatment. These materials may be promising alternatives in the clinical control of dentin erosion.

Self-assembly of dental surface nanofilaments and remineralisation by SnF2 and CPP-ACP nanocomplexes.

Dental caries, erosion and hypersensitivity are major public health problems. SnF2 is used widely in oral care products to help prevent/treat these conditions. Casein phosphopeptide-stabilised amorphous calcium phosphate nanocomplexes (CPP-ACP) are a biomimetic nanotechnology of salivary phosphopeptide-ACP complexes that deliver bioavailable calcium and phosphate ions to promote dental remineralisation (repair). We show here using in vitro studies and a double-blind, randomised controlled, cross-over design in situ clinical trial that SnF2 and CPP-ACP interact to form a nanofilament coating on the tooth surface and that together they are superior in their ability to promote dental remineralisation. Sn(II) by cross-linking the CPP-ACP helps to stabilise the complexes which improves delivery to the tooth surface and enhances binding and ion incorporation into tooth mineral. The combination of SnF2 and CPP-ACP in oral care products may significantly improve their efficacy in prevention/treatment of dental caries/erosion and hypersensitivity.

Er,Cr:YSGG laser associated with acidulated phosphate fluoride gel (1.23% F) for prevention and control of dentin erosion progression.

To evaluate the effect of Er,Cr:YSGG laser, associated with fluoride application, on the prevention/control of dentin erosion. Dentin slabs were embedded in acrylic resin, flattened, and polished. Half of the specimens were previously eroded (10 min immersion in 1% citric acid solution) and half were kept sound. The specimens (n = 10 each substrate) were randomly allocated into the experimental groups, according to the following treatments: control (no treatment); APF gel (1.23% F, 1 min); Er,Cr:YSGG laser irradiation (P1: 0.25 W, 20 Hz, 2.8 J/cm2, tip S75, beam diameter of 750 µm, 1 mm away from the surface); Er,Cr:YSGG laser irradiation (P2: 0.50 W, 20 Hz, 5.7 J/cm2, tip S75, beam diameter of 750 µm, 1 mm away from the surface); APF gel + Er,Cr:YSGG laser P1 and; APF gel + Er,Cr:YSGG laser P2. Afterwards, the specimens underwent an erosion-remineralization cycling, consisting of a 5-min immersion into 0.3% citric acid, followed by 60-min exposure to artificial saliva. This procedure was repeated 4×/day, for 5 days. Surface loss (SL, in µm) was determined by optical profilometry. Specimens from each group were analyzed by environmental scanning electron microscopy (n = 3). Data were statistically analyzed (α = 0.05). For the eroded specimens, APF gel presented the lowest SL, being different from the control. For the sound specimens, none of the groups differed from the control, except for Er,Cr:YSGG laser P2, which presented the highest SL. When substrates were compared, only the eroded specimens of the control and APF + Er,Cr:YSGG laser P1 Groups showed higher SL. Selective structure removal was observed for the laser-treated groups. None of the Er,Cr:YSGG laser parameters were effective in the prevention/control dentin erosion. The laser was also unable to enhance the protection of fluoride against dentin erosion.

3D-Image analysis of the impact of toothpaste abrasivity on the progression of simulated non-carious cervical lesions.

OBJECTIVES: To investigate the effect of toothpaste abrasive level on the progression of non-carious cervical lesions (NCCLs) using 3D-image subtraction. METHODS: Upper first premolars were allocated into seven groups (n = 16) of toothpaste/abrasive slurries: A-Zeodent113/5%, B-Zeodent124/10%, C-Zeodent103/15%, D-Sensodyne Pronamel, E-Crest Cavity-Protection, F-Crest Pro-Health-Whitening, and G-Deionized water (DIW). Teeth were mounted on acrylic blocks, and their root surfaces covered with acrylic resin, except for 2-mm near the cemento-enamel junction that was exposed to toothbrushing. Specimens were brushed with the slurries for 5000-, 15,000-, 35,000- and 65,000-strokes. Impressions were taken at baseline and after each brushing time, and then scanned by a 3D optical profilometer. Dentine volume loss was calculated by image subtraction software and subjected to mixed-model ANOVA and multiple comparison tests (α = 0.05). RESULTS: No significant differences among slurries were observed at 5000 and 15,000. At 35,000, F showed higher loss than all other groups except C, which did not differ from the others. At 65,000, F (4.19 ±â€¯3.29 mm3) showed the highest loss, followed by C (2.33 ±â€¯1.47 mm3), which differed from all the other groups except B (1.85 ±â€¯0.91 mm3). Groups B, A (1.35 ±â€¯0.65 mm3), D (1.17 ±â€¯0.48 mm3), E (1.40 ±â€¯0.68 mm3) and G (1.12 ±â€¯0.73 mm3) did not differ from each other. Groups F and C showed significant increase of volume loss starting at 35,000, while B, A, D and E only at 65,000; no increase loss was observed for G. CONCLUSIONS: 3D-image subtraction was able to quantify and differentiate tooth loss, but only at advanced stages. The progression of NCCLs was more evident and faster for highly abrasive slurries. CLINICAL SIGNIFICANCE: Upon root dentin exposure, brushing with lower abrasive dentifrices is advisable to reduce the risk for NCCLs development.

Efficacy of different strategies to treat root dentin eroded by liquid or gaseous hydrochloric acid associated with brushing abrasion.

OBJECTIVE: This study aims to evaluate how casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) associated with Nd:YAG or Diode laser affects dentin exposed to hydrochloric acid (HCl) with or without tooth brushing. DESIGN: One hundred and sixty human root dentin blocks were selected after they were initially eroded with liquid HCl (pH 1.2) 3x for one day. The blocks were divided into the following groups: G1- liquid HCl (HCl-l), G2- HCl-l + brushing, G3- gaseous HCl (HCl-g), and G4- HCl-g + brushing. Each group was randomly assigned to the following treatments (n = 10): A) Control (no treatment), B) CPP-ACP, C) CPP-ACP associated with Nd:YAG laser (λ = 1064 nm) (40 mJ, 10 Hz, 0.4 W, 15 s), and D) CPP-ACP associated with Diode laser (λ = 980 nm) (0.5 W, 200 µs, 15 s). The treatment with CPP-ACP (G2, G3 and G4) was applied on the dentine surface for 5 min. Erosion (6x/day/20 s) and erosion (6x/day/20 s) with abrasion (2x/10 s) were performed for five days. Dentin volume loss was determined by 3D confocal laser microscopy. Data were analyzed with two-way ANOVA and Tukey's tests. RESULTS: G1 - CPP-ACP (10.77 ±â€¯1.66) and CPP-ACP associated with Diode laser (9.98 ±â€¯0.89) showed lower volume loss in relation Control group (12.86 ±â€¯0.63) (p < 0.05). G2 - CPP-ACP associated with Diode laser (12.41 ±â€¯1.08) elicited lower volume loss as compared to the Control (14.42 ±â€¯1.24) (p < 0.05). As for G3 and G4, all treatments showed similar volume loss. CONCLUSION: CPP-ACP and CPP-ACP associated with Diode laser could control dental tissue loss in dentin eroded by liquid HCl. Moreover, CPP-ACP associated with Diode laser could effectively decrease dental tissue loss in dentin exposed to liquid HCl and brushing.