Effect of mineralized dentin matrix on the prognosis of bone defect and retained root after coronectomy.

OBJECTIVE: To investigate the impact of mineralized dentin matrix (MDM) on the prognosis on bone regeneration and migration of retained roots after coronectomy. MATERIALS AND METHODS: Patients were divided into three groups based on the type of bone graft after coronectomy: Group C (n = 20, collagen), Group T (n = 20, tricalcium phosphate (TCP) + collagen), and Group D (n = 20, MDM + collagen). CBCT scans, conducted immediately and 6 months after surgery, were analyzed using digital software. Primary outcomes, including changes in bone defect depth and retained root migration distance, were evaluated 6 months after surgery. RESULTS: After 6 months, both Groups D and T exhibited greater reduction of the bone defect and lesser retained root migration than Group C (p < 0.001). Group D had greater regenerated bone volume in the distal 2 mm (73 mm3 vs. 57 mm3, p = 0.011) and lesser root migration (2.18 mm vs. 2.96 mm, p < 0.001) than Group T. The proportion of completely bone embedded retained roots was also greater in Group D than in Group C (70.0% vs. 42.1%, p = 0.003). CONCLUSIONS: MDM is an appropriate graft material for improving bone defect healing and reducing retained root migration after coronectomy. CLINICAL RELEVANCE: MDM is an autogenous material prepared chairside, which can significantly improve bone healing and reduce the risk of retained root re-eruption. MDM holds promise as a routine bone substitute material after M3M coronectomy.

Recommendations to minimize tooth root remodeling in patients undergoing maxillary osteotomies.

The purpose of this study was to report root remodeling/resorption percentages of maxillary teeth following the different maxillary osteotomies; i.e. one-piece, two-pieces, three-pieces Le Fort I, surgically assisted rapid palatal expansion (SARPE). The possibility of relationships between root remodeling and various patient- and/or treatment-related factors were further investigated. A total of 110 patients (1075 teeth) who underwent combined orthodontic and orthognathic surgery were studied retrospectively. The sample size was divided into: 30 patients in one-piece Le Fort I group, 30 patients in multi-pieces Le Fort I group, 20 patients in SARPE group and 30 patients in orthodontic group. Preoperative and 1 year postoperative cone beam computed tomography (CBCT) scans were obtained. A validated and automated method for evaluating root remodeling and resorption in three dimensions (3D) was applied. SARPE group showed the highest percentage of root remodeling. Spearman correlation coefficient revealed a positive relationship between maxillary advancement and root remodeling, with more advancement contributing to more root remodeling. On the other hand, the orthodontic group showed a negative correlation with age indicating increased root remodeling in younger patients. Based on the reported results of linear, volumetric and morphological changes of the root after 1 year, clinical recommendations were provided in the form of decision tree flowchart and tables. These recommendations can serve as a valuable resource for surgeons in estimating and managing root remodeling and resorption associated with different maxillary surgical techniques.

Systematic review and meta-analysis of root morphology and canal configuration of permanent premolars using cone-beam computed tomography.

INTRODUCTION: The efficacy of root canal treatment is greatly impacted by a thorough understanding of root canal anatomy. This systematic review and meta-analysis aim to thoroughly investigate the root morphology and canal configuration (RMCC) of permanent premolars (PMs). METHODOLOGY: A comprehensive analysis was conducted following the PRISMA guidelines. Literature exploration was carried out across four electronic databases (PubMed, Embase, Cochrane, and Web of Science). The risk of bias assessment was conducted for the included studies utilizing the Anatomical Quality Assessment (AQUA) tool. Data analysis was performed utilizing SPSS and RevMAN5.3.3. The meta-analysis was applied with a 95% confidence interval to calculate odds ratios (OR). RESULTS: Among the 82 selected studies, 59 studies exhibited potential bias in domain one (objective(s) and subject characteristics), followed by domain three (methodology characterization). The majority of maxillary PM1s had either single root (46.7%) or double roots (51.9%), while three-rooted variants were uncommon (1.4%). Conversely, most other PMs exhibited a single root. In terms of canal configuration, maxillary PM1s predominantly featured double distinct canals (87.2%), with the majority of maxillary PM2s displaying either a single canal (51.4%) or double canals (48.3%). Mandibular PMs were primarily characterized by single canals, accounting for 78.3% of mandibular PM1s and 90.3% of mandibular PM2s. Subgroup analyses revealed higher incidences of single-rooted and single-canalled PMs among Asians compared to Caucasians. Additionally, women exhibited a higher incidence of single-rooted PMs, while men showed a greater frequency of double-rooted PMs. CONCLUSIONS: The comprehensive analysis indicated that maxillary PM1s predominantly possess double roots and double canals, whereas maxillary PM2s and mandibular PMs were primarily characterized by single-rooted with a single canal. Notably, single root and single canal were more prevalent among women and Asian samples.

Determining Whether an Individual is 18 Years or Older Based on the Third Molar Root Pulp Visibility in East China.

OBJECTIVES: To investigate the age-related changes of the mandibular third molar root pulp visibility in individuals in East China, and to explore the feasibility of applying this method to determine whether an individual is 18 years or older. METHODS: A total of 1 280 oral panoramic images were collected from the 15-30 years old East China population, and the mandibular third molar root pulp visibility in all oral panoramic images was evaluated using OLZE 0-3 four-stage method, and the age distribution of the samples at each stage was analyzed using descriptive statistics. RESULTS: Stages 0, 1, 2 and 3 first appeared in 16.88, 19.18, 21.91 and 25.44 years for males and in 17.47, 20.91, 22.01 and 26.01 years for females. In all samples, individuals at stages 1 to 3 were over 18 years old. CONCLUSIONS: It is feasible to determine whether an individual in East China is 18 years or older based on the mandibular third molar root pulp visibility on oral panoramic images.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Micro-computed tomography (micro-CT) evaluation of root canal morphology in immature maxillary third molars.

The endodontic treatment of immature permanent teeth with necrotic pulp is a significant clinical challenge. The success of regenerative endodontic procedure is highly dependent on disinfection of the root canal and an accurate anatomical knowledge of the root canal. The aim of this study was to use micro-computed tomography (micro-CT) analysis to investigate the configuration of root canals in the upper permanent third maxillary molars with incomplete root development in their coronal, apical and middle third portions. Thirty immature third permanent maxillary molars were scanned using a micro-CT system. Then, we measured the diameters and areas of the root canal in the coronal, middle and apical third of the roots. The ratio between the long and short diameter of each root canal was then calculated and the canals were divided into several groups: round, oval, long oval, flat and irregular. The round configuration was not observed in the distobuccal and mesiobuccal roots in any of their anatomical regions. Oval and long oval canals predominated in the distobuccal root. The greatest variations were observed in the mesiobuccal root, with the ribbon-shaped canal predominating in the middle region and an irregular shape in the apical region. In the coronal region of the palatal canal, the round configuration predominated; in the middle third, we observed an almost equivalent distribution between round and oval configurations; apically, the oval shape predominated. In conclusion, we observed significant complexity and variation in the morphology and configuration of root canals in immature permanent molars, thus generating additional obstacles for the success of regenerative endodontics.

Assessment of sealing efficacy, radiopacity, and surface topography of a bioinspired polymer for perforation repair.

Background: Root perforation repair presents a significant challenge in dentistry due to inherent limitations of existing materials. This study explored the potential of a novel polydopamine-based composite as a root repair material by evaluating its sealing efficacy, radiopacity, and surface topography. Methods: Confocal microscopy assessed sealing ability, comparing the polydopamine-based composite to the gold standard, mineral trioxide aggregate (MTA). Radiopacity was evaluated using the aluminium step wedge technique conforming to ISO standards. Surface roughness analysis utilized atomic force microscopy (AFM), while field emission scanning electron microscopy (FESEM) visualized morphology. Results: The polydopamine-based composite exhibited significantly superior sealing efficacy compared to MTA (P < 0.001). Radiopacity reached 3 mm aluminium equivalent, exceeding minimum clinical requirements. AFM analysis revealed a smooth surface topography, and FESEM confirmed successful composite synthesis. Conclusion: This study demonstrates promising properties of the polydopamine-based composite for root perforation repair, including superior sealing efficacy, clinically relevant radiopacity, and smooth surface topography. Further investigation is warranted to assess its clinical viability and potential translation to endodontic practice.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Influence of root shape on canal complexity at the mandibular molar apical surgical resection level: A micro-CT study.

OBJECTIVES: This study aimed to investigate the relationship between the aspect ratios of mandibular molar roots at the apical 3-mm level and their root canal complexity. DESIGN: This study used micro-CT imaging to analyze 163 two-rooted mandibular molars. The aspect ratios of the roots at the apical 3-mm level were categorized as "< 2.75" or "≥ 2.75" (mesial) and "< 1.75" or "≥ 1.75" (distal). A two-dimensional (2D) analysis focused on four apical axial cross-section levels to determine the presence of main and accessory canals and isthmus. Additionally, a three-dimensional (3D) assessment of the apical 4-mm of both roots examined main and accessory canals, apical foramina, apical deltas, and middle mesial canals. RESULTS: Mesial roots with aspect ratios ≥ 2.75 showed a higher number of main canals at all levels compared to those with aspect ratios < 2.75 at the 3-mm level. Additionally, the ≥ 2.75 group exhibited more accessory canals and a higher average number of accessory canals. The 3D assessment confirmed significantly more accessory canals and apical foramina in the ≥ 2.75 group. The prevalence of roots with apical deltas was nearly double in the ≥ 2.75 group, and middle mesial canals were exclusively found in this group. In the distal root, the ≥ 1.75 group showed a significantly higher number of main canals at all axial levels. No significant differences were observed between groups in terms of accessory canals, apical foramina, or deltas. CONCLUSIONS: A higher root aspect ratio is related to higher anatomical complexity.

Fully automated deep learning model for detecting proximity of mandibular third molar root to inferior alveolar canal using panoramic radiographs.

OBJECTIVE: This study endeavored to develop a novel, fully automated deep-learning model to determine the topographic relationship between mandibular third molar (MM3) roots and the inferior alveolar canal (IAC) using panoramic radiographs (PRs). STUDY DESIGN: A total of 1570 eligible subjects with MM3s who had paired PR and cone beam computed tomography (CBCT) from January 2019 to December 2020 were retrospectively collected and randomly grouped into training (80%), validation (10%), and testing (10%) cohorts. The spatial relationship of MM3/IAC was assessed by CBCT and set as the ground truth. MM3-IACnet, a modified deep learning network based on YOLOv5 (You only look once), was trained to detect MM3/IAC proximity using PR. Its diagnostic performance was further compared with dentists, AlexNet, GoogleNet, VGG-16, ResNet-50, and YOLOv5 in another independent cohort with 100 high-risk MM3 defined as root overlapping with IAC on PR. RESULTS: The MM3-IACnet performed best in predicting the MM3/IAC proximity, as evidenced by the highest accuracy (0.885), precision (0.899), area under the curve value (0.95), and minimal time-spending compared with other models. Moreover, our MM3-IACnet outperformed other models in MM3/IAC risk prediction in high-risk cases. CONCLUSION: MM3-IACnet model can assist clinicians in MM3s risk assessment and treatment planning by detecting MM3/IAC topographic relationship using PR.

Is the assessment of the mandibular molar danger zone affected by field of view and voxel size in cone beam computed tomography examinations?

OBJECTIVE: To verify if assessment of the danger zone (DZ) in the mesial root of mandibular molars is affected by field of view (FOV) and voxel sizes in cone beam computed tomography (CBCT) scans. STUDY DESIGN: Forty mandibular molars were scanned by micro-computed tomography, creating the reference standard. The teeth were then submitted for CBCT scans with FOVs of 10 × 5.5 cm and 5 × 5.5 cm and voxel sizes of 0.4, 0.2, 0.15, and 0.075 mm3. The smallest dentin thickness in the DZ from the mesiobuccal and mesiolingual canals was measured at 2, 4, and 6 mm apical to the root furcation. Descriptive statistics, paired t-tests, and intraclass correlation coefficients were used for statistical analysis with significance established at P < .05. RESULTS: All CBCT measurements overestimated the DZ dentin thickness (P < .001) compared to the reference standard. The greatest overestimation occurred in the 5 × 5.5 cm FOV with 0.4 mm3 voxels (P = .007). Dentin thickness measured with the 5 × 5.5 cm FOV and 0.075 mm3 voxels was significantly smaller and produced the best ICC value with the reference standard (0.936). CONCLUSIONS: CBCT overestimates the dentin thickness of the DZ regardless of FOV and voxel sizes. The 5 × 5.5 cm FOV showed the best performance with the 0.075 mm3 voxel size, but it performed poorly with 0.4 mm3 voxels.

Exploring the sex-associated differences in molars fused roots.

BACKGROUND: Human sexual dimorphism is associated with many biological characteristics, including dental variables. OBJECTIVES: To investigate if molars fused roots present sex-associated differences. METHODS: Panoramic radiographs were used to investigate the frequency and distribution of permanent molars fused roots. Only patients with all first and second permanent molars were included. Third molars were not investigated. Any molar with roots fused apical to the usual furcal position were considered molar fused roots. Comparisons between males and females were performed using chi-square or Fisher's and Mann-Whitney tests and the established alpha was 5% (p<0.05). Sex-differential liability models were also proposed. RESULTS: A total of 84 males and 86 females were included and 1360 molars were analyzed. Among them, 46 (26.06%) present at least one molar with fused root. Second maxillary molars were the most affected teeth. There was an association between sex and molars with fused roots. Females had a 3.4 higher chance to present fused roots than males (OR=3.4, CI 95% 1.6-6.8; p=0.0008). The female: male ratio of molars with fused roots was 2.5:1. The number of molars with fused roots ranged from 1 to 6 per patient, and the mean number of Females presented more molars with fused roots (mean = 1.01; standard deviation = 1.52) than males (mean = 0.31; standard deviation = 0.85) (p<0.05). CONCLUSIONS: Molar fused root of permanent teeth presents sex-associated differences, in which females are more affected than males. Our results support sex-differential liability models for molars fused roots.

The ectopic mandibular canines can start tooth formation in three different locations: a case series study based on single orthopantomograms from 47 individuals.

INTRODUCTION: A former study on orthopantomograms from young children with abnormal dental development (not canine ectopia) demonstrated that the tooth bud of the mandibular canine, compared to a stable longitudinal canine axis, could be located normally, anteriorly or posteriorly, with close relation to the first premolar. AIM: The aim of the present study is to analyse on orthopantomograms if the canine axis can demonstrate where the ectopic mandibular canine started tooth formation. MATERIALS: The material consists of orthopantomograms with ectopic mandibular canines and presence of primary mandibular canines from 47 cases (29 cases 9-21 years old and 18 cases with unknown ages). The primary canines demonstrated from minor apical resorption to more severe apical resorption. METHODS: Based on canine maturity, location of the canine axes and the interrelationships between the roots of the permanent canine and first premolar, the location from where the canine started tooth formation was determined. Canine maturity. Maturity stage below half root length and maturity stage above half root length revealed that 11 ectopic canines had less than half root length and 36 cases more than half root length. Canine axes. The canine axis, through the length of the primary canines Ax, is inserted on drawings of the orthopantomograms using the tracing programme Inkscape®. Interrelationship between roots. By visual inspection, the distance between the canine and first premolar was designated close distance, normal distance and extended distance. RESULTS: The results are divided into 3 groups. Group 1: The initial site of the permanent ectopic canine is located within the canine axis (6 cases). Group 2: The initial site of the permanent ectopic canine is located posterior to the canine axis (36 cases). Group 3: The initial site of the permanent ectopic canine is located anterior to the canine axis (5 cases). CONCLUSION: The study explained that the canine axis could divide cases of ectopic canines into three groups according to the location from where tooth formation starts. For getting closer to the pattern of the ectopic canine eruption, it is necessary to analyse series of orthopantomograms taken from the same individual over several years.

Does crown, root, and bone visualization in a clear aligner virtual setup impact treatment decisions?

INTRODUCTION: Clear aligner technology based on a machine learning algorithm is currently available for orthodontic treatment. Treatment planning on the basis of 3-dimensional crown, root, and bone imaging is claimed to provide accurate diagnosis and better treatment outcomes for adult patients with complex needs. This study aimed to answer the following questions: (1) would practitioners modify their original treatment plan once provided with the crown, root, and bone view? and (2) does practitioner satisfaction regarding treatment outcomes change once the crown, root, and bone view is provided? METHODS: An online questionnaire was emailed to members of the American Association of Orthodontists (n = 2300) and the Virginia Orthodontic Education and Research Foundation (n = 211). The survey consisted of videos of 4 patients shown in 2 presentations: crown-only and crown, root, and bone views, generated by artificial intelligence-driven treatment planning software (3D Predict aligner system; 3D Predict, New York, NY). Respondents were asked to answer treatment-related questions and rate the treatment outcomes using a visual analog scale. Statistical analyses were completed to determine the significance of crown, root, and bone view on treatment planning with clear aligners. RESULTS: A total of 70 orthodontists participated in the survey. There were significant differences in responses when viewing patients in crown-only and crown, root, and bone presentations. Across the 4 patients, 33%-43% of practitioners changed their sentiment toward the treatment plan (P <0.001). When rating satisfaction on the 100-point scale, average ratings changed by 10.6 to 21.0 points; both increases and decreases in satisfaction were seen across the patients (P <0.001). CONCLUSIONS: When given 3-dimensional information on the position of a patient's crowns, root, and bone coverage, orthodontists are likely to change their clear aligner treatment plan. This study showed that a confirmation of dehiscence and fenestrations using the root and bone view resulted in practitioner dissatisfaction despite an initial satisfaction with the crown-only view.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Healing and long-term prognosis of root-fractured permanent teeth: a retrospective longitudinal study.

AIM: The purpose of the present study was to evaluate permanent teeth with post-traumatic transversal root fractures, for their initial healing modality, the effect of candidate predictors and their long-term prognosis. METHODOLOGY: A retrospective longitudinal clinical study was conducted to evaluate records from patients bearing transversal root fractures in permanent teeth in order to radiographically assess short-term healing and non-healing events in the fracture line, their prognostic factors and their relationship with long term outcomes. The inter-fragmentary tissues were classified as healing: hard tissue (HT), connective tissue (CT) or connective tissue and bone (CT + B) and non-healing: interposition of granulation tissue (GT). A competing risk survival analysis was conducted to estimate the hazards of healing and non-healing events in the short-term and the effect of demographic, clinical, and treatment variables was assessed using the subdistribution regression model (Fine & Gray). RESULTS: Radiographic findings showed 61.4% of healing in the short-term being strongly influenced by the presence and type of concomitant injuries to the coronal fragment. Teeth with concomitant crown fractures (sHR 24.38, 95% CI [3.16-188.3], p = 0.0022), luxations with dislocations (sHR 10.58, 95% CI [1.37-81.9], p = 0.0240) and subluxations (HR 9.66, 95% CI [1.14-81.7], p = 0.0370) were more likely to present non-healing of root fractures in the short-term. The healing rate in the long-term was of 75.9%, most of them with interposition of bone and connective tissue. Kappa statistics demonstrated an overall agreement of 67.1% between short and long-term healing patterns, in special HT and CT + Bone modalities. CONCLUSION: Healing at the fracture site was the most frequent outcome, both in the short-term and in the long-term. Short-term healing modality was strongly influenced by the presence and type of concomitant injuries to the crown fragment, being the worst prognosis observed in root-fractured teeth with concomitant crown fractures, followed by concomitant luxations with dislocation. CLINICAL RELEVANCE: Post-traumatic transversal root fractures have a positive prognosis supporting therefore, a more conservative approach for these teeth before considering more radical treatments.

Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study.

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Clinical relevance of distolingual roots and periodontal status in mandibular first molars: a cross-sectional study employing CBCT analysis. / ä¸‹é¢Œç¬¬ä¸€ç£¨ç‰™è¿œèˆŒæ ¹çš„å­˜åœ¨ä¸Žç‰™å‘¨çŠ¶æ€çš„ä¸´åºŠç›¸å ³æ€§åˆ†æžï¼šä¸€é¡¹é‡‡ç”¨é”¥å½¢å°„æŸç”µè„‘æ–­å±‚æ‰«æåˆ†æžçš„æ¨ªæ–­é¢ç ”ç©¶.

OBJECTIVES: Distolingual root of the permanent mandibular first molar (PMFM-DLR) has been frequently reported, which may complicate the treatment of periodontitis. This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background. MATERIALS AND METHODS: A total of 836 cone beam computed tomography (CBCT) images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China. Among them, complete periodontal charts were available for 69 Chinese patients with 103 teeth. Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR, bone loss, and periodontal clinical parameters, including clinical attachment loss (CAL), probing pocket depth (PPD), gingival recession (GR), and furcation involvement (FI). RESULTS: The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4% and 26.3%, respectively. Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section, while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section. CONCLUSIONS: The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort. The morphological features of DLR were correlated with the periodontal status of mandibular first molars. This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.