Characterization and Performance of Peanut Shells in Caffeine and Triclosan Removal in Batch and Fixed-Bed Column Tests.

Peanut shells' adsorption performance in caffeine and triclosan removal was studied. Peanut shells were analyzed for their chemical composition, morphology, and surface functional groups. Batch adsorption and fixed-bed column experiments were carried out with solutions containing 30 mg/L of caffeine and triclosan. The parameters examined included peanut shell particle size (120-150, 300-600, and 800-2000 µm), adsorbent dose (0.02-60 g/L), contact time (up to 180 min), bed height (4-8 cm), and hydraulic loading rate (2.0 and 4.0 m3/m2-day). After determining the optimal adsorption conditions, kinetics, isotherm, and breakthrough curve models were applied to analyze the experimental data. Peanut shells showed an irregular surface and consisted mainly of polysaccharides (around 70% lignin, cellulose, and hemicellulose), with a specific surface area of 1.7 m2/g and a pore volume of 0.005 cm3/g. The highest removal efficiencies for caffeine (85.6 ± 1.4%) and triclosan (89.3 ± 1.5%) were achieved using the smallest particles and 10.0 and 0.1 g/L doses over 180 and 45 min, respectively. Triclosan showed easier removal compared to caffeine due to its higher lipophilic character. The pseudo-second-order kinetics model provided the best fit with the experimental data, suggesting a chemisorption process between caffeine/triclosan and the adsorbent. Equilibrium data were well-described by the Sips model, with maximum adsorption capacities of 3.3 mg/g and 289.3 mg/g for caffeine and triclosan, respectively. In fixed-bed column adsorption tests, particle size significantly influenced efficiency and hydraulic behavior, with 120-150 µm particles exhibiting the highest adsorption capacity for caffeine (0.72 mg/g) and triclosan (143.44 mg/g), albeit with clogging issues. The experimental data also showed good agreement with the Bohart-Adams, Thomas, and Yoon-Nelson models. Therefore, the findings of this study highlight not only the effective capability of peanut shells to remove caffeine and triclosan but also their versatility as a promising option for water treatment and sanitation applications in different contexts.

A novel strategy for selective removal and rapid collection of triclosan from aquatic environment using magnetic molecularly imprinted nano-polymers.

Triclosan (TCS) is a kind of chronic toxicity to aquatic organisms. Due to its highly effective antimicrobial, TCS has been widely applied in personal-care products, which naturally poses a potential risk to the ecological system and human health since its release into water-ecological environment. Therefore, it urgently demands a selective, easily separated, recyclable, and low-cost adsorbent to remove the residues of TCS from aquatic environments. In this study, a novel magnetic molecularly imprinted nano-polymers (TMIPs) were prepared for selective adsorption and convenient collection of TCS in aquatic samples, based on a core-shell technique using TCS as template molecule and SiO2-coated Fe3O4 nanoparticles as the support substrate. The functional groups, particle size, morphology and magnetic property of TMIPs were characterized by Fourier-transform infrared spectroscopy, scanning electron microscope, transmission electron microscopy and vibrating sample magnetometer, respectively. The obtained TMIPs possessed excellent adsorption capacity (Qe = 53.12 mg g-1), speedy adsorption equilibrium time (2 min) and high selectivity (k' = 6.321) for TCS. Moreover, the pH-tolerance and stability tests manifested that the adsorption capacity of TMIPs for TCS was acid-resistance and could retain 94.2% of the maximum Qe after 5 times removal-regeneration cycles. The feature of magnetically susceptibility can simplify the procedures of sample handling in TCS determination, because the TMIPs of TCS are easy to be recycled from aquatic samples. As an application demonstration, the toxicity test in microalgae confirmed that a tiny amount of TMIPs could significantly eliminate the toxic effect of TCS on Chlamydomonas reinhardtii via the efficient binding with TCS.

Removal of organic micropollutants from biologically treated greywater using continuous-flow vacuum-UV/UVC photo-reactor.

Despite growing apprehension regarding the fate of organic micropollutants (MPs) of emerging concern, little attention has been paid to their presence in domestic greywater, where they mainly originate from personal care products. Many MPs are not fully removed in conventional greywater treatments and require additional treatment. Vacuum-UV radiation (VUV) can generate ·OH in situ, via water photolysis, initiating advanced oxidation process (AOP) without any chemical addition. Despite growing interest in VUV-based AOP, its performance in real-life grey- or wastewater matrices has hardly been investigated. The present study investigates the removal of triclosan (TCS) and oxybenzone (BP3), common antibacterial and UV-filter MPs, in deionized water (DIW) and in treated greywater (TGW) using combined UVC/VUV or UVC only radiation in a continuous-flow reactor. Degradation kinetics of these MPs and their transformation products (TPs) were addressed, as well as bacterial growth inhibition of the resulting reactor's effluent. In DIW, MP degradation was much faster under the combined UVC/VUV irradiation. In TGW, the combined radiation successfully removed both MPs but at lower efficiency than in DIW, as particles and dissolved organic matter (DOM) acted as radical scavengers. Filtration and partial DOM removal prior to irradiation improved the process efficiency and reduced energy requirements under the combined radiation (from 1.6 and 167 to 1.1 and 6.0 kWh m-3·Ö¼order-1 for TCS and BP3, respectively). VUV radiation also reduced TP concentrations in the effluent. As a result, bacterial growth inhibition of triclosan solution irradiated by VUC/VUV was lower than that irradiated by UVC light alone, for UV dose > 120 mJ cm-2.

Removal of triclosan during wastewater treatment process and sewage sludge composting-A case study in the middle reaches of the Yellow River.

Triclosan (TCS) is widely used as an antibacterial disinfectant in personal care products, especially in rapidly-urbanizing countries, such as China. Almost all TCS enters wastewater treatment plants (WWTPs), but the fate of the TCS in the WWTPs is unclear. TCS may be present in sewage sludge or in effluent, and the discharge of TCS into an ecosystem can pose environmental risks. In the present study, influent, effluent, and sewage sludge were collected from four typical urban WWTPs, and the fate of TCS in the plants was investigated. The study was conducted in Zhengzhou, a city in the middle reaches of the Yellow River in China. The sewage sludge was used for aerobic composting to study the influences of different ventilation treatments on the biodegradation effects of TCS and the changes in the microbial community during the composting process. The results showed that the mean concentration of TCS in the influent of the four typical WWTPs was 397.1 ng/L. The mean level of TCS in the effluent was 8.0 ng/L. The mean concentration of TCS in the sewage sludge was 814.4 ng/g. For the four WWTPs, the percentages of TCS removal were 97.6% (Nansanhuan), 97.6% (Xinzheng), 98.8% (Wulongkou), and 97.9% (Chenyu), respectively. The sewage sludge enrichment rates for TCS ranged between 36.4% and 49%. Therefore, there is a need to focus on the environmental risks from sewage sludge. During aerobic composting, the TCS was effectively degraded under three ventilation strategies. Thus, improved ventilation could enhance the degradation rate of TCS. Moreover, TCS degradation occurred in the mesophilic period and in the early stage of the thermophilic phase period. Finally, the degradation rates of TCS in sewage sludge samples composted with low-, medium-, and high-ventilation treatments were 48.1%, 59.0%, and 59.5%, respectively. Thus, high ventilation could provide enough oxygen for the pile and enhanced microorganism activity, benefiting the degradation of TCS. In addition, the microbial communities change during the composting process, and a diversity index of the changes can help explain the composting process.

Electronic Tongue Coupled to an Electrochemical Flow Reactor for Emerging Organic Contaminants Real Time Monitoring.

Triclosan, which is a bacteriostatic used in household items, has raised health concerns, because it might lead to antimicrobial resistance and endocrine disorders in organisms. The detection, identification, and monitoring of triclosan and its by-products (methyl triclosan, 2,4-Dichlorophenol and 2,4,6-Trichlorophenol) are a growing need in order to update current water treatments and enable the continuous supervision of the contamination plume. This work presents a customized electronic tongue prototype coupled to an electrochemical flow reactor, which aims to access the monitoring of triclosan and its derivative by-products in a real secondary effluent. An electronic tongue device, based on impedance measurements and polyethylenimine/poly(sodium 4-styrenesulfonate) layer-by-layer and TiO2, ZnO and TiO2/ZnO sputtering thin films, was developed and tested to track analyte degradation and allow for analyte detection and semi-quantification. A degradation pathway trend was observable by means of principal component analysis, being the sample separation, according to sampling time, explained by 77% the total variance in the first two components. A semi-quantitative electronic tongue was attained for triclosan and methyl-triclosan. For 2,4-Dichlorophenol and 2,4,6-Trichlorophenol, the best results were achieved with only a single sensor. Finally, working as multi-analyte quantification devices, the electronic tongues could provide information regarding the degradation kinetic and concentrations ranges in a dynamic removal treatment.

Occurrence and removal of triclosan in Canadian wastewater systems.

Triclosan (TCS) is an antimicrobial agent used in many personal care and cleaning products. It has been detected in most environmental compartments and the main entry pathway is wastewater effluents and biosolids. TCS was analyzed in 300 samples of raw influent, final effluent, and biosolids from 13 wastewater treatment plants (WWTPs) across Canada representing five types of typical wastewater treatment systems. TCS was almost always detected in influent (median 1480 ng/L), effluent (median 107 ng/L), and biosolids (median 8000 ng/g dry weight) samples. Removals of TCS from lagoons as well as secondary and advanced treatment facilities were significantly higher than primary treatment facilities (p < 0.001). TCS removal was strongly correlated with organic nitrogen removal. TCS removals at most lagoons and plants that use biological treatment were higher during summer compared with winter. However, no seasonal or temperature effects were observed at the two primary facilities, likely due to the absence of biological activity. Aerobically digested solids contained the lowest levels (median 555 ng/g) while anaerobically digested primary solids contained the highest levels of TCS (median 22,700 ng/g). The results of this large comprehensive study demonstrate that TCS is consistently present in wastewater and biosolids at relatively high concentrations and that removal from wastewater and levels in biosolids are strongly influenced by the wastewater and solids treatment types.

An Immunoaffinity Purification Method for the Simultaneous Analysis of Triclocarban and Triclosan in Foodstuffs by Liquid Chromatography Tandem Mass Spectrometry.

Triclocarban (TCC) and triclosan (TCS) have been simultaneously detected in five kinds of foodstuffs using an immunoaffinity purification method coupled with ultrahigh-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the first time. Two highly specific monoclonal antibodies against TCC and TCS were produced and coupled to N-hydroxysuccinimide-activated Sepharose 6B gel to prepare the immunosorbent. Under the optimal conditions, mean recoveries from spiked samples by the IAC-UHPLC-MS/MS method were 70.1-92.8% for TCC and 76.6-102.5% for TCS. Intraday relative standard deviations were below 14.5%. The limits of quantification (LOQs) of TCC were 1 ng/L for beverage samples and 0.01-0.02 µg/kg for food samples. The LOQs of TCS were 0.03 µg/L for beverage samples and 0.2-0.3 µg/kg for food samples. The applicability of the method has been proven by analyzing TCC and TCS in different samples from supermarkets in Beijing. The proposed method is sufficiently sensitive and reliable for monitoring trace concentrations of TCC and TCS in food samples.

A highly effective, recyclable, and novel host-guest nanocomposite for Triclosan removal: A comprehensive modeling and optimization-based adsorption study.

In this research paper, response surface methodology (RSM), generalized regression neural network (GRNN), and Adaptive Neuro-Fuzzy Inference System (ANFIS) were employed to develop prediction models for Triclosan (TCS) removal by a novel inclusion complex (host-guest complex). Hence, ß-cyclodextrin (ß-CD) and poly(ethylene glycol) (PEG) host-guest complex loaded on the multi walled carbon nanotube (MWCNT/PEG/ß-CD) was prepared and characterized by Raman, NMR, TGA, XRD, SEM, TEM, and point of zero charge (pHpzc) technique. The effects of MWCNT/PEG/ß-CD dose (g), temperature (°C), antibiotic concentration (mg L-1), and sonication time (min), each at five levels were investigated as independent factors. Central composite design (CCD) of RSM setup was applied in combination with ANFIS and GRNN training dataset for evaluation purposes. Moreover, the kinetic, isotherm equilibrium, and thermodynamic parameters of adsorption of TCS on MWNT-PEG/ß-CD nanocomposite was examined. To assess the accuracy of results, several statistics such as R2, RMSE (root mean square error), mean squared error (MSE), MAE (mean absolute error), sum of the absolute error (SAE), %AAD (absolute average deviation), average relative error (ARE), hybrid fractional error function (HYBRID), Marquart's percentage standard deviation (MPSD), and Pearson's Chi-square measure (χ) were checked. The results of ANFIS approach were found to be more trustworthy than GRNN model since better statistical analysis were attained. However, it was known that the GRNN is easier and take a little time for modeling than the ANFIS approach.

Eco-friendly rapid removal of triclosan from seawater using biomass of a microalgal species: Kinetic and equilibrium studies.

Triclosan is an important emerging pollutant. It has become ubiquitous due to its incomplete elimination in municipal wastewater treatment plants causing serious environmental problems. Biomass from microorganisms as sorbent of pollutants can be an eco-friendly alternative for triclosan removal. In this work, the elimination of triclosan using biomass (dead and living) of the marine microalga Phaeodactylum tricornutum was characterized in cultures exposed to light and in a complex solution (seawater). Maximum removal capacity, isotherms, kinetics, FTIR characterization, pH effect and reuse were evaluated and discussed. Photodegradation of triclosan was also evaluated. Both biomasses showed similar effectiveness; around 100% of pollutant was eliminated when its concentration was 1 mg L-1 in only 3 h using a biomass concentration of 0.4 g L-1. A pseudo-second order model guided the biosorption process. Considering the photodegradation as a first-order process, the whole process (photodegradation + biosorption) was suitably modelled with pseudo-third order and Elovich kinetics. Biosorption increased with the decrease in pH. Temkin isotherm showed the best fit for the experimental data. Both biomasses showed good reuse after five cycles, losing only 7% in efficiency. P. tricornutum biomass is an attractive eco-material for triclosan elimination with low-cost and easy handling than other sorbents.

Biomimetic lipophilic activated carbon for enhanced removal of triclosan from water.

Triclosan, an antimicrobial micro-pollutant with a high bio-accumulation potential represented by its high octanol-water partition coefficient (log Kow) of 4.76 is commonly encountered in water and wastewater worldwide. The present study focuses on biomimetic surface modification of commercial activated carbon (PAC) with long chain fatty acid namely docosahexaenoic acid (DHA) resulting in enhanced affinity for the hydrophobic micro-pollutant; triclosan (TCS). The sorption process of the resulting modified lipophilic carbon (PACM) was investigated for the effect of various experimental conditions. The Freundlich isotherm and pseudo-second-order kinetic models had a better fit. PACM exhibited the maximum adsorption capacity of 395.2 mg g-1 in contrast to 71.5 mg g-1 obtained for PAC. The surface morphology in terms of surface area, surface acidity, pore size, contact angle, etc. and were also evaluated. The contact angle of 134.3° obtained for PACM confirmed its highly hydrophobic nature. The efficacy of PACM was also evaluated using real-world secondary treated effluent containing triclosan confirming its applicability for tertiary treatment of wastewater. The study established that the biomimetic approach of creating lipid-like sites on the carbon surface results in the enhanced removal of lipophilic micro-pollutants. It can also be utilized for the removal and recovery of a wide variety of other organic micro-pollutants.

Enhanced triclosan and nutrient removal performance in vertical up-flow constructed wetlands with manganese oxides.

Limited concentrations of oxygen in constructed wetlands (CWs) have inhibited their ability to remove emerging organic contaminants (EOCs) at µg/L or ng/L levels. Manganese (Mn) oxides were proposed as a solution, as they are powerful oxidants with strong adsorptive capabilities. In the present study, triclosan (TCS) was selected as a typical EOC, and CW microcosms with Mn oxides (birnessite) coated sand (B-CWs) and without (C-CWs) were developed to test the removal capacities of TCS and common nutrients. We found that the addition of Mn oxides coated sand significantly improved removal efficiencies of TCS, NH4-N, COD, NO3-N and TP (P < 0.05). The average concentration of Mn(II) effluent was 0.036 mg L-1, mostly lower than the drinking water limit. To gain insight into the mechanisms of pollution removal, Mn transformation, dissolved oxygen (DO) distribution, bacterial abundance, and microbial community composition were also investigated. Maximum Mn(II) was detected at 20 cm height of the B-CWs in anoxic zone. Although Mn-oxidizing bacteria existed in the layer of 30-50 cm with 103-104 CFU g-1 dry substate, Mn oxides were only detected at height from 40 to 50 cm with rich oxygen in B-CW. The quantities of bacterial 16S rRNA, amoA, narG and nosZ were not significantly different between two systems (P > 0.05), while Illumina high-throughput sequencing analysis revealed that the abundance of denitrifying bacteria was significant higher in B-CWs, and the abundance of Gammaproteobacteria that have a recognized role in Mn transformation were significantly increased. The results indicated that Mn oxides could enhance TCS and common pollutants removal in both anoxic and aerobic areas through the recycling of Mn between Mn(II) and biogenic Mn oxides.

Extraction of triclosan and methyltriclosan in human fluids by in situ ionic liquid morphologic transformation.

Herein, we established an ionic liquid (IL)-based liquid-solid transformation microextraction (IL-LTME) combined with HPLC-UV detection for the simultaneous determination of triclosan (TCS) and its methylated product, methyltriclosan (MTCS), in human fluids. The IL-LTME method was based on an in situ metathesis between hydrophilic IL and ion-exchange salt to form a solid hydrophobic IL. According to the above principle, a hydrophilic IL, [C12MIM]Br, was selected as the extractant, and NH4PF6 as ion-exchange salt. The prominent advantages of the newly developed method are: (1) the in-situ reaction between the extractant [C12MIM]Br and ion-exchange salt NH4PF6 changed the IL from hydrophilic to hydrophobic that avoiding the stick of ionic liquid on the tube wall; (2) bubbling with NH3 greatly increased the contact area between IL-extractant and analytes resulting in improved extraction recovery; and (3) solidification of the [C12MIM] PF6 provided a good separation and avoided the use of specialized equipment. A series of main parameters were optimized by single-factor screening and central composite design as follows: 0.9 mL of NaOH, 2.0 min of second ultrasonically time, 10 min of centrifugation time, 21 mg of extractant [C12MIM]PF6, 2.4 min of ultrasonic time, 65 mg of NH4PF6 and 13.8 min of cooling time. Under the optimized conditions, the limits of detection for TCS and MTCS were 0.126-0.161 µg L-1 in plasma samples, and 0.211-0.254 µg L-1 in urine samples, respectively. The extraction recoveries for TCS and MTCS were in the range of 94.1-103.8%. The intra-day and inter-day precisions were 1.00-4.74% and 1.02-5.21%, respectively. In general, the IL-LTME method is environment-friendly, time-saving, economical, high efficient and robust with low detection limits and high recoveries. Thus, the newly developed method has excellent prospects for sample pretreatment and analysis of trace TCS and MTCS in blood and urine samples.

Using mass struvite precipitation to remove recalcitrant nutrients and micropollutants from anaerobic digestion dewatering centrate.

The primary objective of this research was to remove recalcitrant nutrients from anaerobically digested sludge dewatering centrate. A struvite precipitation methodology is proposed where salt crystals are encouraged to ballast colloidal particles through heterogeneous nucleation and subsequent crystal growth. The secondary objective was to assess presence of micropollutants in precipitates. Four biologically unique dewatering centrates were used to test the precipitation methodology on the variety of anaerobic digester configurations that can be expected from municipal wastewater treatment plant. The effect of digestion sludge retention time (2 day, 20 day) and digestion temperature (35 °C, 55 °C) on the removal of dissolved unreactive phosphorus (P) and nitrogen (N) was monitored. Averaged across all four centrates, the precipitation methodology resulted in dissolved unreactive P and N removal of 82.4% and 66.6%, respectively. Antimicrobial contaminants (triclosan, triclocarban) were observed in the precipitates at minute concentrations (<18 ng/g-dry solids). Therefore, mass struvite precipitation can provide a means of recalcitrant nutrient treatment and reactive nutrient recovery without the micropollutant burden of biosolids land application.

Removal and metabolism of triclosan by three different microalgal species in aquatic environment.

Triclosan, an antimicrobial additive widely used in personal care products, has caused the contamination of various aquatic environment. Biodegradation was proved to play a vital role in the treatment of triclosan in wastewater. However, there is limited information about the metabolic pathway. In this study, three common freshwater microalgae including Chlorella pyrenoidosa (C. pyrenoidosa), Desmodesmus sp., and Scenedesmus obliquus (S. obliquus) were applied to remove and biodegrade triclosan in aqueous culture medium. High removal rate up to 99.7% was observed during the treatment of 400µgL-1 triclosan by the three microalgae for 1day. The removal of triclosan attributed to cellular uptake by C. pyrenoidosa, and biotransformation by Desmodesmus sp. and S. obliquus. Simultaneously, triclosan metabolites resulted from hydroxylation, reductive dechlorination, or ether bond cleavage and their conjugates produced through glucosylation and/or methylation were detected in the biodegradation samples. Metabolic pathway of triclosan by algae were firstly proposed in this work, shedding light on the environmental fate of triclosan.

Fate of triclosan in laboratory-scale activated sludge reactors - Effect of culture acclimation.

Triclosan (TCS); a widely used antimicrobial biocide, exists in several pharmaceutical and personal care products. Due to its wide usage, TCS is detected in wastewater at varying concentrations. Biological treatability of TCS and its effect on chemical oxygen demand (COD) removal efficiency were investigated running laboratory-scale pulse-fed sequencing batch reactors with acclimated and non-acclimated cultures. The culture was acclimatized to TCS by gradually increasing its concentration in the synthetic feed wastewater from 100 ng/L to 100 mg/L. There were no effects of TCS on COD removal efficiency up to the TCS concentration of 500 ng/L for both acclimatized and non-acclimatized cases. However, starting from a concentration of 1 mg/L, TCS affected the COD removal efficiency adversely. This effect was more pronounced with non-acclimatized culture. The decrease in the COD removal efficiency reached to 47% and 42% at the TCS concentration of 100 mg/L, under acclimation and non-acclimation conditions respectively. Adsorption of TCS into biomass was evidenced at higher TCS concentrations especially with non-acclimated cultures. 2,4-dichlorophenol and 2,4-dichloroanisole were identified as biodegradation by-products. The occurrence and distribution of these metabolites in the effluent and sludge matrices were found to be highly variable depending, especially, on the culture acclimation conditions.

Household triclosan and triclocarban effects on the infant and maternal microbiome.

In 2016, the US Food and Drug Administration banned the use of specific microbicides in some household and personal wash products due to concerns that these chemicals might induce antibiotic resistance or disrupt human microbial communities. Triclosan and triclocarban (referred to as TCs) are the most common antimicrobials in household and personal care products, but the extent to which TC exposure perturbs microbial communities in humans, particularly during infant development, was unknown. We conducted a randomized intervention of TC-containing household and personal care products during the first year following birth to characterize whether TC exposure from wash products perturbs microbial communities in mothers and their infants. Longitudinal survey of the gut microbiota using 16S ribosomal RNA amplicon sequencing showed that TC exposure from wash products did not induce global reconstruction or loss of microbial diversity of either infant or maternal gut microbiotas. Broadly antibiotic-resistant species from the phylum Proteobacteria, however, were enriched in stool samples from mothers in TC households after the introduction of triclosan-containing toothpaste. When compared by urinary triclosan level, agnostic to treatment arm, infants with higher triclosan levels also showed an enrichment of Proteobacteria species. Despite the minimal effects of TC exposure from wash products on the gut microbial community of infants and adults, detected taxonomic differences highlight the need for consumer safety testing of antimicrobial self-care products on the human microbiome and on antibiotic resistance.

Loading and removal of PAHs, fragrance compounds, triclosan and toxicity by composting process from sewage sludge.

Although the production of compost from sewage sludge is well established in developed countries, the use of sludge-based compost may represent a source of pollutants. The present study assessed the levels of potentially harmful compounds in compost as well as their rates of decrease during composting. The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs), three fragrance compounds (OTNE, HHCB and AHTN) and triclosan were determined in the initial sewage sludge and in compost over the span of 1year. Simultaneously, the toxicity to luminescent bacteria (Aliivibrio fischeri) and aryl hydrocarbon receptor reactivity of organic solvent extracts of sludge and compost samples were assessed. Higher PAH, fragrance compounds, and triclosan concentrations were found in sewage sludge from urban areas compared with rural regions, and the urban sludge was also more toxic than the rural sludge. The high pollutant concentrations in urban sludge raised the concentrations of these compounds in the raw materials for composting and in the resulting composts. The organic matter was decomposed by 65% during the composting process, and the measured toxic substances were decreased by a similar amount, with the exception of triclosan, which decreased by only 35%. The toxicity to A. fischeri decreased to a greater extent (90%) than did the organic matter, while the aryl hydrocarbon receptor reactivity decreased by only 35%. This lower decrease coincided with that of the aryl hydrocarbon receptor-reactive PAHs (37%).

Determination of selected parabens, benzophenones, triclosan and triclocarban in agricultural soils after and before treatment with compost from sewage sludge: A lixiviation study.

An accurate and sensitive method for the determination of selected EDCs in soil and compost from wastewater treatment plants is developed and validated. Five parabens, six benzophenone-UV filters and the antibacterials triclosan and triclocarban were selected as target analytes. The parameters for ultrasound-assisted extraction were thoroughly optimized. After extraction, the analytes were detected and quantified using ultra-high performance liquid chromatography tandem mass spectrometry. Ethylparaben (ring-(13)C6 labelled) and deuterated benzophenone (BP-d10) were used as internal standards. The method was validated using matrix-matched calibration and recovery assays with spiked samples. The limits of detection ranged from 0.03 to 0.40 ng g(-1) and the limits of quantification from 0.1 to 1.0 ng g(-1), while precision in terms of relative standard deviation was between 9% and 21%. Recovery rates ranged from 83% to 107%. The validated method was applied for the study of the behavior of the selected compounds in agricultural soils treated and un-treated with compost from WWTP. A lixiviation study was developed in both agricultural soil and treated soil and first order kinetic models of their disappearance at different depths are proposed. The application of organic composts in the soil leads to an increase of the disappearance rate of the studied compounds. The lixiviation study also shows the risk of pollution of groundwater aquifers after disposal or waste of these EDCs in agricultural soils is not high.

Quantification of Hydroxylated Polybrominated Diphenyl Ethers (OH-BDEs), Triclosan, and Related Compounds in Freshwater and Coastal Systems.

Hydroxylated polybrominated diphenyl ethers (OH-BDEs) are a new class of contaminants of emerging concern, but the relative roles of natural and anthropogenic sources remain uncertain. Polybrominated diphenyl ethers (PBDEs) are used as brominated flame retardants, and they are a potential source of OH-BDEs via oxidative transformations. OH-BDEs are also natural products in marine systems. In this study, OH-BDEs were measured in water and sediment of freshwater and coastal systems along with the anthropogenic wastewater-marker compound triclosan and its photoproduct dioxin, 2,8-dichlorodibenzo-p-dioxin. The 6-OH-BDE 47 congener and its brominated dioxin (1,3,7-tribromodibenzo-p-dioxin) photoproduct were the only OH-BDE and brominated dioxin detected in surface sediments from San Francisco Bay, the anthropogenically impacted coastal site, where levels increased along a north-south gradient. Triclosan, 6-OH-BDE 47, 6-OH-BDE 90, 6-OH-BDE 99, and (only once) 6'-OH-BDE 100 were detected in two sediment cores from San Francisco Bay. The occurrence of 6-OH-BDE 47 and 1,3,7-tribromodibenzo-p-dioxin sediments in Point Reyes National Seashore, a marine system with limited anthropogenic impact, was generally lower than in San Francisco Bay surface sediments. OH-BDEs were not detected in freshwater lakes. The spatial and temporal trends of triclosan, 2,8-dichlorodibenzo-p-dioxin, OH-BDEs, and brominated dioxins observed in this study suggest that the dominant source of OH-BDEs in these systems is likely natural production, but their occurrence may be enhanced in San Francisco Bay by anthropogenic activities.

Nanoparticles with photoinduced precipitation for the extraction of pollutants from water and soil.

Nanotechnology may offer fast and effective solutions for environmental clean-up. Herein, amphiphilic diblock copolymers are used to develop a platform of photosensitive core-shell nanoparticles. Irradiation with ultraviolet light removes the protective layer responsible for colloidal stability; as a result, the nanoparticles are rapidly and irreversibly converted to macroscopic aggregates. The associated phase separation allows measuring the partitioning of small molecules between the aqueous phase and nanoparticles; data suggests that interactions are enhanced by decreasing the particle size. Adsorption onto nanoparticles can be exploited to efficiently remove hydrophobic pollutants from water and contaminated soil. Preliminary in vivo experiments suggest that treatment with photocleavable nanoparticles can significantly reduce the teratogenicity of bisphenol A, triclosan and 17α-ethinyl estradiol without generating obviously toxic byproducts. Small-scale pilot experiments on wastewater, thermal printing paper and contaminated soil demonstrate the applicability of the approach.