Equilibrium and Kinetic Study of l- and d-Valine Adsorption in Supramolecular-Templated Chiral Mesoporous Materials.

Adsorption kinetic studies are conducted to investigate the potential to use chiral mesoporous materials nanoporous guanosine monophosphate material-1 (NGM-1) and nanoporous folic acid material-1 (NFM-1) for the enantiomeric separation of l- and d-valine. A pseudo-second-order (PSO) kinetic model is applied to test the experimental adsorption equilibrium isotherms, according to both the Langmuir and Freundlich models and the characteristic parameters for each model are determined. The calcined versions of both NGM-1 and NFM-1 fit the Langmuir model with maximum sorption capacities of 0.36 and 0.26 g/g for the preferred adsorption enantiomers, d-valine and l-valine, respectively. Experimental results and the analysis of adsorption models suggest a strong adsorbate-adsorbent interaction, and the formation of a monolayer of tightly packed amino acid on the internal mesopore surface for the preferred enantiomers.

The Strecker reaction coupled to Viedma ripening: a simple route to highly hindered enantiomerically pure amino acids.

The Strecker reaction is broadly used for the preparation of α-amino acids. However, control of enantioselectivity remains challenging. We here couple the Strecker reaction to Viedma ripening for the absolute asymmetric synthesis of highly sterically hindered α-amino acids. As proof-of-principle, the enantiomerically pure α-amino acids tert-leucine and α-(1-adamantyl)glycine were obtained.

Depsidomycins B and C: New Cyclic Peptides from a Ginseng Farm Soil-Derived Actinomycete.

LC/MS-based chemical profiling of a ginseng farm soil-derived actinomycete strain, Streptomyces sp. BYK1371, enabled the discovery of two new cyclic heptapeptides, depsidomycins B and C (1 and 2), each containing two piperazic acid units and a formyl group at their N-terminus. The structures of 1 and 2 were elucidated by a combination of spectroscopic and chemical analyses. These new compounds were determined to possess d-leucine, d-threonine, d-valine, and S-piperazic acid based on the advanced Marfey's method and a GITC (2,3,4,6-tetra-O-acetyl-ß-d-glucopyranosyl isothiocyanate) derivatization of their hydrolysates, followed by LC/MS analysis. Depsidomycins B and C displayed significant antimetastatic activities against metastatic breast cancer cells (MDA-MB-231).

Enantioseparation of the carboxamide-type synthetic cannabinoids N-(1-amino-3-methyl-1-oxobutan-2-yl)-1-(5-fluoropentyl)-1H-indazole-3-carboxamide and methyl [1-(5-fluoropentyl)-1H-indazole-3-carbonyl]-valinate in illicit herbal products.

Synthetic cannabinoids, recently used as alternatives to Cannabis sativa, are among the most frequently abused drugs. Identified in 2014, the synthetic cannabinoids N-(1-amino-3-methyl-1-oxobutan-2-yl)-1-(5-fluoropentyl)-1H-indazole-3-carboxamide (5F-AB-PINACA) and methyl [1-(5-fluoropentyl)-1H-indazole-3-carbonyl]-valinate (5F-AMB) are carboxamides composed of 1-(5-fluoropentyl)-1H-indazole-3-carboxylic acid and valine amide/methyl ester. Because of their composition, these molecules have pairs of enantiomers derived from the chiral center of their amino acid structures. Previous studies on the identification of 5F-AB-PINACA and 5F-AMB did not consider the existence of enantiomers, and there have been no reports on the enantiopurities of synthetic cannabinoids. We synthesized both enantiomers of these compounds and then separated the enantiomers by liquid chromatography-high-resolution mass spectrometry using a column with a chiral stationary phase consisted with amylose tris (3-chloro-4-methylphenylcarbamate). Under the optimized conditions, the enantiomer resolutions were 2.2 and 2.3 for 5F-AB-PINACA and 5F-AMB, respectively. Analysis of 10 herbal samples containing 5F-AB-PINACA and one herbal sample containing 5F-AMB showed that they all contained the (S)-enantiomer, but the (R)-enantiomer was only detected in two samples and at a ratio of less than 20%.

Continuous recovery of valine in a model mixture of amino acids and salt from Corynebacterium bacteria fermentation using a simulated moving bed chromatography.

The economical efficiency of valine production in related industries is largely affected by the performance of a valine separation process, in which valine is to be separated from leucine, alanine, and ammonium sulfate. Such separation is currently handled by a batch-mode hybrid process based on ion-exchange and crystallization schemes. To make a substantial improvement in the economical efficiency of an industrial valine production, such a batch-mode process based on two different separation schemes needs to be converted into a continuous-mode separation process based on a single separation scheme. To address this issue, a simulated moving bed (SMB) technology was applied in this study to the development of a continuous-mode valine-separation chromatographic process with uniformity in adsorbent and liquid phases. It was first found that a Chromalite-PCG600C resin could be eligible for the adsorbent of such process, particularly in an industrial scale. The intrinsic parameters of each component on the Chromalite-PCG600C adsorbent were determined and then utilized in selecting a proper set of configurations for SMB units, columns, and ports, under which the SMB operating parameters were optimized with a genetic algorithm. Finally, the optimized SMB based on the selected configurations was tested experimentally, which confirmed its effectiveness in continuous separation of valine from leucine, alanine, ammonium sulfate with high purity, high yield, high throughput, and high valine product concentration. It is thus expected that the developed SMB process in this study will be able to serve as one of the trustworthy ways of improving the economical efficiency of an industrial valine production process.

L-valine, an antialgal amino acid from Streptomyces jiujiangensis JXJ 0074(T).

An antialgal compound was isolated from the cultured broth of Streptomyces jiujiangensis JXJ 0074(T) by using bioassay methods. Based on the data of (1)H-NMR, (13)C-NMR, ESI-MS, and thin layer chromatography, the active compound was identified as L-valine, which showed antialgal activity mainly against Microcystis. L-valine exhibited greater antialgal activities than both L-lysine and copper sulfate (CuSO4) did on Microcystis aeruginosa lawn. However, M. aeruginosa recovered growth earlier with higher growth rate in L-valine treatment than in L-lysine treatment. L-valine dissipated completely within 2 days, much quicker than L-lysine (6 days), which resulted in the lysing of more than 80 % M. aeruginosa cells and the release of amount of intracellular microcystin-LR (MC-LR) within 2 days. As a resultant, the extracellular MC-LR content was more than twice of the control from day 1 to 5. Exposure to L-valine significantly promoted the synthesis of MC-LR. L-lysine also promoted the release and synthesis of MC-LR with much lesser efficiency than L-valine. L-valine could damage Microcystis severely, causing perforation and collapse of M. aeruginosa cells and decrease of the chlorophyll. The superoxide dismutase (SOD) activity in L-valine-treated cells of M. aeruginosa initially increased with 32.94 ± 3.37 % higher than the control after 36 h and then decreased quickly. However, the increase rate of superoxide anion radical (O2 (-)) was much higher than that of SOD, which resulted in serious lipid peroxidation and accumulation of malondialdehyde (MDA). To our knowledge, this is the first report showing L-valine active against cyanobacteria.

Isolation and assessment of the in vitro anti-tumor activity of smenothiazole A and B, chlorinated thiazole-containing peptide/polyketides from the Caribbean sponge, Smenospongia aurea.

The study of the secondary metabolites contained in the organic extract of Caribbean sponge Smenospongia aurea led to the isolation of smenothiazole A (3) and B (4), hybrid peptide/polyketide compounds. Assays performed using four solid tumor cell lines showed that smenothiazoles exert a potent cytotoxic activity at nanomolar levels, with selectivity over ovarian cancer cells and a pro-apoptotic mechanism.

Experimental evaluation of the effect of a modified port-location mode on the performance of a three-zone simulated moving-bed process for the separation of valine and isoleucine.

The removal of isoleucine from valine has been a key issue in the stage of valine crystallization, which is the final step in the valine production process in industry. To address this issue, a three-zone simulated moving-bed (SMB) process for the separation of valine and isoleucine has been developed previously. However, the previous process, which was based on a classical port-location mode, had some limitations in throughput and valine product concentration. In this study, a three-zone SMB process based on a modified port-location mode was applied to the separation of valine and isoleucine for the purpose of making a marked improvement in throughput and valine product concentration. Computer simulations and a lab-scale process experiment showed that the modified three-zone SMB for valine separation led to >65% higher throughput and >160% higher valine concentration compared to the previous three-zone SMB for the same separation.

Occurrence and fate of the angiotensin II receptor antagonist transformation product valsartan acid in the water cycle--a comparative study with selected ß-blockers and the persistent anthropogenic wastewater indicators carbamazepine and acesulfame.

The substantial transformation of the angiotensin II receptor antagonist valsartan to the transformation product 2'-(2H-tetrazol-5-yl)-[1,1'-biphenyl]-4-carboxylic acid (referred to as valsartan acid) during the activated sludge process was demonstrated in the literature and confirmed in the here presented study. However, there was a severe lack of knowledge regarding the occurrence and fate of this compound in surface water and its behavior during drinking water treatment. In this work a comparative study on the occurrence and persistency of valsartan acid, three frequently used ß-blockers (metoprolol, atenolol, and sotalol), atenolol acid (one significant transformation product of atenolol and metoprolol), and the two widely distributed persistent anthropogenic wastewater indicators carbamazepine and acesulfame in raw sewage, treated wastewater, surface water, groundwater, and tap water is presented. Median concentrations of valsartan acid in the analyzed matrices were 101, 1,310, 69, <1.0, and 65 ng L(-1), respectively. Treated effluents from wastewater treatment plants were confirmed as significant source. Regarding concentration levels of pharmaceutical residues in surface waters valsartan acid was found just as relevant as the analyzed ß-blockers and the anticonvulsant carbamazepine. Regarding its persistency in surface waters it was comparable to carbamazepine and acesulfame. Furthermore, removal of valsartan acid during bank filtration was poor, which demonstrated the relevance of this compound for drinking water suppliers. Regarding drinking water treatment (Muelheim Process) the compound was resistant to ozonation but effectively eliminated (≥90%) by subsequent activated carbon filtration. However, without applying activated carbon filtration the compound may enter the drinking water distribution system as it was demonstrated for Berlin tap water.

Strategy for identification and characterization of small quantities of drug degradation products using LC and LC-MS: application to valsartan, a model drug.

The present study demonstrates the applicability of a strategy involving use of liquid chromatography (LC) and liquid chromatography-mass spectrometry (LC-MS) techniques for the identification and characterization of minute quantities of degradation products, without their isolation from the reaction matrix in pure form. Valsartan was used as a model drug. It was subjected to forced degradation studies under the International Conference on Harmonisation (ICH) prescribed conditions of hydrolysis (acid, base and neutral), photolysis, oxidation and thermal stress. The drug showed lability under acid/neutral hydrolytic and photolytic conditions, while it was stable to base hydrolytic, oxidative and thermal stress. Three small degradation products were formed, which were separated on a C-18 column using a gradient method. The same were characterized with the help of their fragmentation pattern and accurate masses obtained upon LC-MS/TOF analyses and online H/D exchange studies. The structures were supported by appropriate mechanistic explanation. The strategy involving use of LC and LC-MS for the identification and characterization of minute quantities of degradation products was applied on a model drug, valsartan. Three degradation products were successfully characterised without their isolation from the reaction matrix in pure form. The structures were supported by appropriate mechanistic explanation.

Enantiomeric LC separation of valsartan on amylose based stationary phase.

A simple, rapid and robust LC method was developed and validated for the enantiomeric separation of valsartan in bulk drug and formulation. The enantiomers of valsartan were resolved on a Chiralpak AD-H (amylose based stationary phase) column using a mobile phase consisting of n-hexane: 2-propanol: trifluoroacetic acid (85:15:0.2, v/v/v) at a flow rate of 1.0 mL/min. The resolution between the enantiomers was found to be not less than 3.2. The presence of trifluoroacetic acid in the mobile phase played an important role in enhancing chromatographic efficiency and resolution between the enantiomers. The calibration curve for the (R)-enantiomer showed excellent linearity over the concentration range of 600 ng/mL (LOQ) to 6000 ng/mL. The limit of detection and limit of quantification for the (R)-enantiomer were 200 and 600 ng/mL, respectively. The percentage recovery of the (R)-enantiomer ranged between 98.7 to 100.05 % in bulk drug samples of valsartan. The proposed method was found to be suitable and accurate for quantitative determination of (R)-enantiomer in bulk drug substance.

Sex pheromone of the scarab beetle Phyllophaga (Phytalus) georgiana (horn).

The sex pheromone of Phyllophaga (Phytalus) georgiana was characterized as valine methyl ester, tentatively the L-enantiomer. This is the first sex pheromone identified from the Phyllophaga subgenus Phytalus. The pheromone was extracted from female glands, the active component isolated by coupled gas chromatography-electroantennogram detection analysis, characterized by mass spectrometry, and shown to be active in field tests. The seasonal flight pattern was determined for P. georgiana as well as for three other species, P. anxia (both northern and southern genitalic forms), P. gracilis, and P. postrema. The latter three species were captured in traps baited with L-isoleucine methyl ester.

Compound-specific nitrogen isotope analysis of D-alanine, L-alanine, and valine: application of diastereomer separation to delta15N and microbial peptidoglycan studies.

We have developed an analytical method to determine the compound-specific nitrogen isotope compositions of individual amino acid enantiomers using gas chromatography/combustion/isotope ratio mass spectrometry. A novel derivatization of amino acid diastereomers by optically active (R)-(-)-2-butanol or (S)-(+)-2-butanol offers two advantages for nitrogen isotope analysis. First, chromatographic chiral separation can be achieved without the use of chiral stationary-phase columns. Second, the elution order of these compounds on the chromatogram can be switched by a designated esterification reaction. We applied the method to the compound-specific nitrogen isotope analysis of D- and L-alanine in a peptidoglycan derived from the cell walls of cultured bacteria (Firmicutes and Actinobacteria; Enterococcus faecalis, Staphylococcus aureus, Staphylococcus staphylolyticus, Lactobacillus acidophilus, Bacillus subtilis, Micrococcus luteus, and Streptomyces sp.), natural whole bacterial cells (Bacillus subtilis var. natto), (pseudo)-peptidoglycan from archaea (Methanobacterium sp.), and cell wall from eukaryota (Saccharomyces cerevisiae). We observed statistically significant differences in nitrogen isotopic compositions; e.g., delta15N ( per thousand vs air) in Staphylococcus staphylolyticus for d-alanine (19.2 +/- 0.5 per thousand, n = 4) and L-alanine (21.3 +/- 0.8 per thousand, n = 4) and in Bacillus subtilis for D-alanine (6.2 +/- 0.2 per thousand, n = 3) and L-alanine (8.2 +/- 0.4 per thousand, n = 3). These results suggest that enzymatic reaction pathways, including the alanine racemase reaction, produce a nitrogen isotopic difference in amino acid enantiomers, resulting in 15N-depleted D-alanine. This method is expected to facilitate compound-specific nitrogen isotope studies of amino acid stereoisomers.

Separation and quantitation of several angiotensin II receptor antagonist drugs in human urine by a SPE-HPLC-DAD method.

In this work, an SPE-HPLC method coupled to photodiode array detection was validated in human urine matrix, in order to monitor four antihypertensive angiotensin II receptor antagonist drugs in patients under cardiovascular treatment. For that purpose, experimental design was used. Quantitation was accomplished by the internal standard method. The obtained LOQs were 95, 113, 125, and 85 ng/mL for eprosartan, telmisartan, irbesartan, and valsartan, respectively. The intraday and interday precision and accuracy at four concentration levels in the working range (LOQ-15 microg/mL) were always lower than 11% RSD and 8% relative error. The urine samples proved to be stable during 4 h at room temperature, after three thaw-freeze cycles, and for 2 months at -20 degrees C. No interferences from other endogenous compounds or co-administered drugs were found. The method has been successfully applied to monitor the renal elimination of eprosartan and valsartan during 24 h.

Synthesis and chromatographic properties of a chiral stationary phase derived from bovine serum albumin immobilized on magnesia-zirconia using phosphonate spacers.

A novel bovine serum albumin (BSA)-modified magnesia-zirconia stationary phase was prepared using the sodium salt of cis-(3-methyloxiranyl)phosphonic acid (fosfomycin) as spacer and glutaraldehyde as coupler. Baseline separation of six derivatized amino acids (DNB-Leu, Dansyl-Val, etc.) was achieved on this column using ammonium acetate buffer-isopropanol mobile phase at a flow rate of 1.0 mL/min. The effects of mobile phase composition, eluent pH value, column temperature, and flow rate on the retention and separation of chiral compounds were also investigated. The BSA chiral stationary phase (BSA-CSP) was relatively stable under experimental conditions. The coupling reaction in this method was mild, reliable, and reproducible; thus it was also suitable for the immobilization of various biopolymers with amino groups in the preparation of chromatography stationary phases.

Field amplified sample stacking coupled with chip-based capillary electrophoresis using negative pressure sample injection technique.

A multi-T microchip for integrated field amplified sample stacking (FASS) with CE separation to increase the chip-based capillary electrophoresis (chip-based CE) sensitivity was developed. Volumetrically defined large sample plug was formed in one step within 5s by the negative pressure in headspace of the two sealed sample waste reservoirs produced using a syringe pump equipped with a 3-way valve. Stacking and separation can proceed only by switching the 3-way valve to release the vacuum in headspace of the two sample waste reservoirs. This approach considerably simplified the operations and the equipments for FASS in chip-based CE systems. Migration time precisions of 3.3% and 1.3% RSD for rhodamine123 (Rh123) and fluorescien sodium salt (Flu) in the separation of a mixture of Flu and Rh123 were obtained for nine consecutive determinations with peak height precisions of 4.8% and 3.4% RSD, respectively. Compared with the chip-based CE on the cross microchip, the sensitivity for analysis of FlTC, FITC-labeled valine (Val) and Alanine (Ala) increased 55-, 41- and 43-fold, respectively.

Enantiomer separation by reversed-phase liquid chromatography with novel hydrophobic phases composed of chiral cationic surfactants.

This paper describes enantiomer separation using four kinds of chiral stationary phases (CSPs) where quaternary ammonium surfactants containing L-valine diamide moieties into long alkyl chains were bound to silicagel supports by reversed phase liquid chromatography. Our aim was to examine hydrogen bonding association of the chiral moiety in hydrophobic phase brought about by aggregation of the micelle-forming surfactants on the surface. The following CSPs were thus derived from the vinyl-terminated chiral surfactants via hydrosilylation: CSP 1 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N,N,N-trimethylammonium bromide, CSP 2 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N,N,N-trimethyl-ammonium bromide, CSP 3 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N-octadecanyl-N,N-dimethyl-ammonium bromide and CSP 4 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N-octadecanyl-N,N-dimethylammonium bromide. The degree of hydrophobicity in the interfacial phase was observed by measuring pyrene fluorescence in aqueous media including an organic modifier. Retention of racemic N-acylleucine isopropyl esters was highest in CSP 4, followed by 3, 2, and 1. Largest alpha values toward enantiomer separation were observed for CSP 4 where the chiral moieties were kept through a hexamethylene unit apart from the polar head groups and to which another long alkyl chain was attached, as compared with those for CSP 4. In CSP 4, the chiral moiety to interact with enantiomeric solutes should be buried into the interfacial phase deeply in more extent than CSP 3. In a similar manner, CSP 2 has more effective for enantiomer separation than CSP 1. The interfacial phase of these CSPs was easily exposed to the bulk phase because of the affinity between the bulk phase and the polar head groups as well as their electrostatic repulsion. However, degree of the enantiomer separation can be controlled by the depth of the chiral moiety in the hydrophobic interfacial phase.

Citrinadin A, a novel pentacyclic alkaloid from marine-derived fungus Penicillium citrinum.

[structure: see text] A novel pentacyclic alkaloid, citrinadin A (1), was isolated from the cultured broth of the fungus Penicillium citrinum, which was separated from a marine red alga, and the structure was elucidated by spectroscopic data. The relative stereochemistry of the pentacyclic core was assigned on the basis of NOESY data and (1)H-(1)H coupling constants, and the presence of an N,N-dimethyl-L-valine residue in 1 was determined by chiral HPLC analysis of the hydrolysate.

Chiral separation by electrokinetic capillary chromatography using newly synthesized linear polymers containing L-amino acid moieties.

Chiral linear polymers were prepared by the thermal polymerization of N-acryloyl-L-valine and N-acryloyl-L-alanine derivatives using 3-mercaptopropionic acid (3-MPA) as a radical transfer agent. C-Terminal groups of the derivatives were methyl and tert-butyl esters later removed, and N-methylamide moieties. The N'-methylamide derivative of N-acryloyl-L-valine was copolymerized with methyl ester at a molar mixing ratio of 1:1. The ester groups were removed to provide anionic linear polymers terminated with carboxylic acid of the amino acid residue. The polymers are thus shown to function as pesudostationary phases that separate enantiomeric solutes in electrokinetic capillary chromatography (EKC). Racemic 3,5-dinitrobenzoylamino isopropyl esters were separated with the polymer derived from N-acryloyl-L-valine esters and with the copolymer from N-acryloyl-L-valine methyl ester and N-acryloyl-L-valine N'-methylamide at pH 7.0. These separations could not be observed at pH 9.0 in migrating solutions containing anionic linear polymers. This pH dependence can be discussed from the standpoint of the microscopic hydrophobicity of the polymers, as assessed from the fluorescence of pyrene adsorbed onto the polymers in water.

Resolution of enantiomers of DL-amino acids on silica gel plates impregnated with optically pure (-)-quinine.

TLC resolution of enantiomers from racemic amino acids was achieved on silica gel plates impregnated with optically pure (-)-quinine. The successful solvent systems were butanol-chloroform-acetic acid (3:7:5, v/v) for DL-methionine; 6:8:4, v/v for alanine; 10:1:4; v/v for threonine; and ethyl acetate-carbon tetrachloride-propionic acid (10.5:6.5:3.5, v/v) for valine. Minimum detection limits were found to be different for each of the amino acid, ranging between 0.9 and 3.7 microg. The effects of concentration of impregnating reagent, temperature and pH on resolution of enantiomers have been studied in details.