Synchronized determination of sacubitril and valsartan with some co-administered drugs in human plasma via UPLC-MS/MS method using solid-phase extraction.

An accurate and sensitive UPLC-MS/MS method was developed and validated for the simultaneous estimation of the newly developed combination of sacubitril and valsartan and the co-administered drugs nebivolol, chlorthalidone and esomeprazole in human plasma. Solid-phase extraction was conducted for the purification and extraction of the drugs from human plasma. Chromatographic separation was carried out on an Agilent SB-C18 (1.8 µm, 2.1 × 50 mm) column using losartan as internal standard. Isocratic elution was applied using acetonitrile-0.1% formic acid in water (85: 15, v/v) as mobile phase. Detection was carried out using a triple-quadrupole tandem mass spectrometer using multiple reaction monitoring, at positive mode at m/z 412.23 → 266.19 for sacubitril, m/z 436.29 → 235.19 for valsartan, m/z 405.8 → 150.98 for nebivolol, m/z 346.09 → 198 for esomeprazole and a selected combination of two fragments m/z 423.19 → 207.14 and 423.19 → 192.2 for losartan (internal standard), and in negative ionization mode at m/z 337.02 → 190.12 for chlorthalidone. The method was linear over the concentration ranges 30-2,000 ng/ml for sacubitril, 70-2,000 ng/ml for valsartan, esomeprazole and chlorthalidone and 70-5,000 pg/ml for nebivolol. The developed method is sensitive and selective and could be applied for dose adjustment, bioavailability and drug-drug interaction studies.

Preparation of amine-modified lignin and its applicability toward online micro-solid phase extraction of valsartan and losartan in urine samples.

In the present work, with the focus on an environmentally-friendly approach, some gels were prepared by synthesizing amine-modified lignin, extracted from sugarcane bagasse, and further esterification and subsequent freeze-drying. These lignin-based gels were implemented as extractive phases in an online micro-solid phase extraction (µSPE) setup in conjunction with high performance liquid chromatography (HPLC) with UV detector. The developed method was used for analytical determination of valsartan and losartan in urine samples. To study the effect of the functionalization process, the efficiency of the unmodified lignin and the functionalized lignin were compared both in the absence and the presence of graphene oxide (GO), presumably as a suitable doping agent. Surprisingly, higher extraction efficiency for the functionalized lignin, compared to both unmodified lignin and GO was observed. The amination process for the prepared gel was analyzed and proved by CHNS elemental analysis and Fourier transform infrared (FT-IR) spectroscopy. The morphology of sorbet was investigated via scanning electron microscope (SEM) imaging and a nanoscale cauliflower feature was observed. The method was optimized and subsequently applied to the analysis of the urine samples. Limits of detection (LOD) of 8 and 6 µg L - 1, limits of quantification (LOQ) of 27 and 20 µg L - 1 and linear dynamic range (LDR) of 27-2000 and 20-2000 µg L - 1 with intraday relative standard deviations (RSD%) of 4 and 3% were obtained for valsartan and losartan, respectively. The whole online µSPE-HPLC setup was conveniently used for the analysis of a patient urine sample and a quantity of 352 µg L - 1 of losartan was found. Acceptable relative recoveries (109-108 and 95-94% for valsartan and losartan) revealed the analytical potential of the method for the determination of drugs in complex urine samples.

Preparation of magnetic molecularly imprinted polymer for dispersive solid-phase extraction of valsartan and its determination by high-performance liquid chromatography: Box-Behnken design.

In this work, core/shell magnetic molecularly imprinted polymer nanoparticles were synthesized for extraction and pre-concentration of valsartan from different samples and then it was measured with high-performance liquid chromatography. For preparation of molecularly imprinted polymer nanoparticles, Fe3 O4 nanoparticles were coated with tetraethyl orthosilicate and then functionalized with 3-(trimethoxysilyl) propyl methacrylate. In the next step, molecularly imprinted polymer nanoparticles were synthesized under reflux and distillation conditions via polymerization of methacrylic acid, valsartan (as a template), azobisisobutyronitrile and ethylene glycol dimethacrylate as cross linking. The properties of molecularly imprinted polymer nanoparticle were investigated by FTIR spectroscopy, field emission scanning electron microscopy, and X-ray diffraction. Box-Behnken design with the aid of desirability function was used for optimizing the effect of variables such as the amounts of molecularly imprinted polymer nanoparticles, time of sonication, pH, and volume of methanol on the extraction percentage of valsartan. According to the obtained results, the affecting variables extraction condition were set as 10 mg of adsorbent, 16 min for sonication, pH = 5.5 and 0.6 mL methanol. The obtained linear response (r2  > 0.995) was in the range of 0.005-10 µg/mL with detection limit 0.0012 µg/mLand extraction recovery was in the range of 92-95% with standard deviation less than 6% (n = 3).

Preparation of hollow porous molecularly imprinted and aluminum(III) doped silica nanospheres for extraction of the drugs valsartan and losartan prior to their quantitation by HPLC.

Water compatible hollow porous molecularly imprinted nanospheres (HP-MINs) have been prepared for specific recognition and extraction of the blood pressure regulating drugs valsartan (VAL) and losartan (LOS). All synthetic steps were performed in aqueous medium and without consumption of organic solvents. The morphology and functionality of the materials were characterized by FT-IR, FE-SEM, and TEM techniques. The adsorption and selectivity experiments demonstrate that the HP-MINs possess a high binding capacity, fast kinetics, excellent water dispersibility and remarkable selectivity for VAL and LOS. The HP-MINs were utilized for dispersive solid phase extraction of VAL and LOS prior to their determination by HPLC-UV. Main variables and their interactions on extraction yield were optimized by multivariate analysis with least amount of experiments. Under optimized conditions, the method has a linear response in the 5-2000 µg L-1 concentration range of both VAL and LOS. The limits of detection are 1.5 µg L-1 for VAL and 1.4 µg L-1 for LOS. Graphical abstract Schematic representation of dispersive solid phase extraction (d-SPE) of valsartan (VAL) and losartan (LOS) from urine sample by hollow porous molecularly imprinted nanospheres (HP-MINs).

Preconcentration of valsartan by dispersive liquid-liquid microextraction based on solidification of floating organic drop and its determination in urine sample: Central composite design.

In this work, a fast, easy, and efficient dispersive liquid-liquid microextraction method based on solidification of floating organic drop followed by high-performance liquid chromatography with UV detection was developed for the separation/preconcentration and determination of the drug valsartan. Experimental design was applied for the optimization of the effective variables (such as volume of extracting and dispersing solvents, ionic strength, and pH) on the extraction efficiency of valsartan from urine samples. The optimized values were 250.0 µL ethanol, 65.0 µL 1-dodecanol, 4.0% w/v NaCl, pH 3.8, 1.0 min extraction time, and 4.0 min centrifugation at 4000 rpm min(-1) . The linear response (r(2) = 0.997) was obtained in the range of 0.013-10.0 µg mL(-1) with a limit of detection of 4.0 ng mL(-1) and relative standard deviations of less than 5.0 % (n = 6).

Application of modified stir bar with nickel:zinc sulphide nanoparticles loaded on activated carbon as a sorbent for preconcentration of losartan and valsartan and their determination by high performance liquid chromatography.

In this study, the stir bar was coated for the first time with the ​nicel:zins sulphide nanoparticles (Ni:ZnS NPs) loaded on activated carbon (AC) (Ni:ZnS-AC) as well as 1-ethyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) using sol gel technique and was used for stir bar sorptive extraction (SBSE) of losartan (LOS) and valsartan (VAL) as the model compounds. The extracted analytes were then quantified by high performance liquid chromatography (HPLC) equipped with an ultra violet detector. The best extraction performance for LOS and VAL was obtained through the optimization of the parameters affecting SBSE including pH of sample solution, ionic strength, extraction time, volume of desorption solvent, desorption time, and stirring speed. The fractional factorial design (FFD) was used to find the most important parameters, which were then optimized by the central composite design (CCD) and the desirability function (DF). Under the optimal experimental conditions, wide linear ranges of 0.4-50µgL(-1) and 0.5-50µgL(-1) and good RSDs (at level of 5µgL(-1) and n=6) of 4.4 and 4.9% were obtained for LOS and VAL, respectively. With the enrichment factors (EFs) of 188.6 and 184.8-fold, the limits of detection (LODs, S/N=3) of the developed method were found to be 0.12 and 0.15µgL(-1) for LOS and VAL, respectively. The developed method was successfully applied to the determination of LOS and VAL in urine and plasma matrices.

A new, rapid, stability-indicating UPLC method for separation and determination of impurities in amlodipine besylate, valsartan and hydrochlorothiazide in their combined tablet dosage form.

A new rapid stability-indicating UPLC method for separation and determination of impurities in amlodipine besylate, valsartan and hydrochlorothiazide in their combined tablet dosage form was developed. The separation of Ph. Eur. related substances of amlodipine besylate (A, B, D, E, F, G), hydrochlorothiazide (A, B, C), valsartan (B, C), two other valsartan impurities (S)-2-(N-{[2'-cyanobiphenyl-4-yl]methyl}pentanamido)-3-methylbutanoic acid and (S)-3-methyl-2-{[2'-(1H-tetrazol-5-yl)biphenyl-4-yl]methylamino}butanoic acid and several unknown impurities was achieved by reversed phase liquid chromatography with UV detection. The detection wavelengths were set as follows: 225nm for valsartan, its impurities and for the impurity D of amlodipine, 271nm for hydrochlorothiazide and its impurities and 360nm for amlodipine and its impurities except for impurity D. Zorbax Eclipse C8 RRHD (100mm×3.0mm, 1.8µm) was used as a separation column and the analytes were eluted within 11min by a programmed gradient mixture of 0.01M phosphate buffer pH 2.5 and acetonitrile. The method was successfully validated in accordance to the International Conference of Harmonization (ICH) guidelines for amlodipine besylate and its impurity D, valsartan and its impurity C and hydrochlorothiazide and its impurities A, B and C. The triple-combined tablets were exposed to thermal, higher humidity, acid, alkaline, oxidative and photolytic stress conditions. Stressed samples were analyzed by the proposed method. All the significant degradation products and impurities were satisfactory separated from each other and from the principal peaks of drug substances. The peak purity test complied for peaks of amlodipine, valsartan and hydrochlorothiazide in all the stressed samples and indicated no co-elution of degradation products. The method was found to be precise, linear, accurate, sensitive, specific, robust and stability-indicating and could be used as a routine purity test method for amlodipine besylate, valsartan, hydrochlorothiazide and their pharmaceutical combinations.