Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

Quantitative evaluation of vertical control in orthodontic camouflage treatment for skeletal class II with hyperdivergent facial type.

BACKGROUND: In this study, we sought to quantify the influence of vertical control assisted by a temporary anchorage device (TAD) on orthodontic treatment efficacy for skeletal class II patients with a hyperdivergent facial type and probe into the critical factors of profile improvement. METHODS: A total of 36 adult patients with skeletal class II and a hyperdivergent facial type were included in this retrospective case-control study. To exclude the effect of sagittal anchorage reinforcement, the patients were divided into two groups: a maxillary maximum anchorage (MMA) group (N = 17), in which TADs were only used to help with anterior tooth retraction, and the MMA with vertical control (MMA + VC) group (N = 19), for which TADs were also used to intrude the maxillary molars and incisors. The treatment outcome was evaluated using dental, skeletal, and soft-tissue-related parameters via a cephalometric analysis and cast superimposition. RESULTS: A significant decrease in ANB (P < 0.05 for both groups), the retraction and uprighting of the maxillary and mandibular incisors, and the retraction of protruded upper and lower lips were observed in both groups. Moreover, a significant intrusion of the maxillary molars was observed via the cephalometric analysis (- 1.56 ± 1.52 mm, P < 0.05) and cast superimposition (- 2.25 ± 1.03 mm, P < 0.05) of the MMA + VC group but not the MMA group, which resulted in a remarkable decrease in the mandibular plane angle (- 1.82 ± 1.38°, P < 0.05). The Z angle (15.25 ± 5.30°, P < 0.05) and Chin thickness (- 0.97 ± 0.45°, P < 0.05) also improved dramatically in the MMA + VC group, indicating a better profile and a relaxed mentalis. Multivariate regression showed that the improvement in the soft tissue was closely related to the counterclockwise rotation of the mandible plane (P < 0.05). CONCLUSIONS: TAD-assisted vertical control can achieve intrusion of approximately 2 mm for the upper first molars and induce mandibular counterclockwise rotation of approximately 1.8°. Moreover, it is especially important for patients without sufficient retraction of the upper incisors or a satisfactory chin shape.

Comparison of the accuracy of different types of bite recordings - an in vitro study.

OBJECTIVES: Reconstruction of a three-dimensional jaw position determined by a bite recording is an important aspect of prosthetic therapy. Different materials are used for this purpose. In the dental technical workflow, recordings are used to mount a lower jaw cast in a patient-like spatial position relative to the upper jaw cast. We evaluated the accuracy of positioning under the influence of different jaw positions and materials. MATERIALS AND METHODS: In an experimental setup, comprising an articulator, a pair of metal casts, and an optoelectronic measurement system, the spatial position of the incisal point and two condylar points were measured. To evaluate the accuracy of repeated repositioning of casts in the technical workflow, 324 measurements were taken from 108 recordings, consisting of silicone bite-stops made of addition curing silicone with 95 shore hardness, acrylic wafers, and wax recordings. The recordings were obtained in four jaw relations differing in vertical and protrusive components. RESULTS: Of the three materials/material combinations examined, silicone showed the most consistent results across all measurements, followed by the acrylic wafer system, and then wax recordings. Generally, recordings with smaller gaps between the jaws and no protrusive components showed greater deviations compared to jaw positions with greater protrusion and higher vertical dimensions. CONCLUSIONS AND CLINICAL RELEVANCE: To achieve reliable model mounting with high accuracy, recordings should include the use of a frontal jig and four small recording platelets made of silicone, especially if only a slight elevation of the vertical dimension is needed.

Accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with post-treatment lateral cephalogram.

BACKGROUND: To quantify the accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with actual changes. METHODS: Pretreatment and post-treatment lateral cephalograms of 30 young adult subjects (25 females and 5 males; age range of 16 to 21 years) were imported and traced in Dolphin Imaging software (version 11.95). Tracings of actual treatment results and the Dolphin predicted treatment outcome were superimposed to calculate the prediction errors. The mean difference for the Holdaway soft tissue analysis and at each landmark was measured in both the X and Y axes. Paired t test was used to compare the statistical differences in Holdaway soft tissue analysis parameters. RESULTS: There were significant differences between the predicted and actual values in three parameters of the Holdaway soft tissue analysis (P < 0.05). The overall accuracy of estimation was better in vertical direction than horizontal. Prediction of upper and lower lip landmarks was overestimated horizontally and underestimated vertically, whereas that belonging to chin was underestimated horizontally and overestimated vertically. Soft tissue nasion and soft tissue A-point were most accurately predicted, whereas the least accuracy was found in soft tissue chin region. CONCLUSIONS: Dolphin Imaging Software (version 11.95) can be accurate enough for use in patient communication and education but should be used with caution. It is most accurate in predicting soft tissue changes in the nasion and A-point regions, but least accurate in chin region.

Stability of class II correction with the Austro Repositioner associated with multi-brackets fixed appliances in dolichofacial patients.

BACKGROUND: The purposes of the present study were to evaluate the changes produced by the Austro Repositioner, and to assess the stability of Class II malocclusion treatment with the Austro Repositioner associated with fixed appliances and its capacity to control the vertical dimension in dolichofacial patients. METHODS: A group of patients with Class II malocclusion due to mandibular retrognathism and a dolichofacial growth pattern treated with the Austro Repositioner combined with fixed appliances were compared to a matched untreated control group of subjects with Class II malocclusion. Evaluations were made on the basis of lateral cephalograms taken at T1 (initial records), T2 (end of treatment), and T3 (1 year after treatment). Statistical comparisons were performed with paired- and two-sample t tests. RESULTS: The experimental (treated) group comprised 30 patients, 14 boys and 16 girls, and the control group comprised 30 subjects (15 boys and 15 girls) with similar ages at T1, T2 and T3. In the treated group, a significant decrease in the ANB angle was found (- 3.79 ± 1.46; p < 0.001). No significant differences were found in the maxillary skeletal measurements. In contrast, the SNB angle showed a significant increase of 3.77 ± 1.49 in the treated group compared with a nonsignificant increase of 0.77 ± 1.55 in the control group (p = 0.002). Vertical changes showed a significant decrease in the FMA angle (- 3.36 ± 1.62), while the lower anterior facial height distance and the overbite increased significantly in the treated group, reflecting a change in vertical dimensions after treatment. No significant changes were observed in either the treated or control group during the one-year posttreatment period; thus, the treatment results remained stable. CONCLUSIONS: The Austro Repositioner combined with fixed appliances could be considered an optimal treatment modality in Class II dolichofacial patients.

Comparing the accuracy of occlusal vertical dimension transfer in CAD-CAM dentures.

PURPOSE: There are different methods to transfer occlusal vertical dimension (OVD) when fabricating complete dentures, but it is not clear which method yields the most accurate transfer. This study investigated the accuracy of transferring the OVD of the maxillary/mandibular relationship when designing and fabricating digital dentures by evaluating two commonly used workflows: duplicate dentures (DDs) and occlusion rims (ORs). MATERIALS AND METHODS: Mounted edentulous casts were used to simulate a completely edentulous patient. These casts were used in two workflows: (1) DD workflow where complete dentures were fabricated and relined (n = 15), and (2) OR where final impressions and ORs were constructed (n = 15). Relined dentures and ORs with fiduciary markers were then scanned and virtually articulated, then exported as STL files. A scan of the articulated casts (simulated patients) with fiduciary markers embedded was also exported as an STL file and used as a control. STL files for each workflow were superimposed over the control and analyzed in 3D inspection software (Geomagic Control X, 3D Systems, NC) for deviations (mm) at three different locations. Average 3D deviations were compared among the groups using a two-way ANOVA (α-0.05). RESULTS: The average deviation for OR was significantly larger than DD at all locations of measurement [F = 46.00, p < 0.0001]. The majority of the measurements (98.9%) had a positive deviation value, indicating increased OVD. The overall deviation for the OR group from the control was 0.72 ± 0.13 mm versus 0.45 ± 0.23 mm for the DD group. There was no difference in deviation between the points of measurement and no interaction between the location and method [F = 0.02, p < 0.98]. CONCLUSIONS: The DD workflow exhibited less deviation in the transfer of OVD than the OR workflow. However, the deviation was small and may not be clinically significant.

Does increasing vertical dimension of occlusion in centric relation affect muscular activity? An electromyographic study.

OBJECTIVE: In many esthetic treatments, clinicians may consider the option to modify the maxillo mandibular position. A raise of the vertical dimension of occlusion (VDO) may help restore esthetics, increase the space for dental materials, and reduce the invasiveness of dental procedures. Traditionally, VDO increases are done by using the centric relation (CR) position. Despite a long history of use, the neuromuscular effects of different maxillo mandibular relations are not fully studied. The aim of this study was to investigate the effect of alterations of maxillo-mandibular relation from maximal intercuspal position (MIP) to a raised VDO CR position on jaw-elevator muscle activity. MATERIALS AND METHODS: Fifteen healthy individuals were asked to carry out maximal voluntary clenching (MVC) in MIP and in CR on individual splints. Electromyographic (EMG) activity of the masseter and anterior temporalis muscles was assessed in µV as the root mean square of the amplitude. Specific indexes and ratios were also computed. Data analyzed in MIP and CR were compared by paired student's t-tests. RESULTS: MVC levels were not negatively affected by a VDO increase in CR position. On the contrary masseter muscles showed a statistically significant increase (p < 0.005). No significant effect on the anterior temporalis was observed. CONCLUSION: These results suggest that no immediate negative effect on maximum voluntary clenching was induced by a VDO increase in CR position. A slight increase observed in EMG clenching levels could be explained by the increase in VDO when clenching on the splint. CLINICAL IMPLICATIONS: The results of this study support the use of CR position as a pragmatic reference position due to the absence of relevant or negative changes in neuromuscular function.

Reabilitação estética e funcional inferior com aumento de dimensão vertical de oclusão: relato de caso / Lower aesthetic and functional rehabilitation with increased vertical dimension of occlusion: case report

Os hábitos parafuncionais são caracterizados como movimentos involuntários e multifatoriais, podendo ter como principais fatores causais o estresse e a ansiedade. Essa condição acarreta, muitas vezes, na diminuição da dimensão vertical de oclusão por conta do desgaste dentário, prejudicando mastigação, fonação, estética e funções, sendo, portanto, de suma importância seu diagnóstico e tratamento. Aquele se dá através da anamnese, associado ao exame clínico e, se necessário, exames complementares. A abordagem clínico-terapêutica é ampla e multidisciplinar, devendo atuar no fator causal e suas consequências, existindo uma gama de possibilidades terapêuticas, tornando, por isso, um tratamento complexo. Por tal, o presente estudo aborda uma opção de tratamento em um relato de um caso clínico onde o paciente apresentava perda de dimensão vertical de oclusão, desgastes dentários e queixas funcionais e estéticas. A técnica se deu por meio do aumento da dimensão vertical através de Table Tops e facetas anteriores, ambas em resina composta atrelado ao aconselhamento multidisciplinar. Este trabalho mostrou a importância da realização de uma técnica reabilitadora correta, pois a sobrecarga e a perda de dimensão vertical podem gerar danos ao sistema estomatognático, prejudicando a articulação temporomandibular, ligamentos, músculos e dentes. Nesse contexto, conclui-se que é de suma importância uma avaliação minuciosa do paciente, tendo um planejamento correto do caso para um correto tratamento e um prognóstico positivo(AU)

Parafunctional habits are characterized as involuntary and multifactorial movements, and the main causal factors may be stress and anxiety. This condition often leads to a decrease in the vertical dimension of occlusion due to tooth wear, impairing chewing, phonation, aesthetics and functions, and therefore its diagnosis and treatment are of supreme importance. The former takes place through anamnesis, associated with a clinical examination and, if necessary, additional tests. The clinicaltherapeutic approach is wide and multidisciplinary and must operate on the causal factor and its consequences, with a range of therapeutic possibilities, turning it a complex treatment. Therefore, the study presents a treatment of a case report where the patient had loss of vertical dimension of occlusion, dental wear and functional and aesthetic complaints. The technique was performed by increasing the vertical dimension through Table Tops and anterior veneers, both in composite resin attached to a multidisciplinary advice. This work showed the importance of performing a correct rehabilitation technique, because the overload and loss of vertical dimension can cause damage to the stomatognathic system, harming the temporomandibular joint, ligaments, muscles and teeth. In this context, it is concluded that a thorough evaluation of the patient is very important, having a correct planning of the case for a correct treatment and a positive prognosis(AU)

Hard and soft tissue shape variation and changes in Class II division 1 malocclusion during orthodontic treatment: a geometric morphometric analysis.

BACKGROUND: This study aims to determine the hard and soft tissue shape variation and its changes in Class II division 1 malocclusion before and after orthodontic treatment using Geometric Morphometric Analysis. METHODS: This retrospective study included 141 pre-treatment and near-end treatment lateral cephalometric radiographs of Class II division 1 malocclusion patients aged 16-40 years with a skeletal II pattern (ANB > 4o). 32 landmarks in Cartesian coordinates were created and identified using MorphoJ software to establish a shape analysis. RESULTS: The vertical dimensions (hypodivergent to hyperdivergent facial profiles) showed the largest variation in the general shape of hard and soft tissue, followed by the anteroposterior dimensions (mild to severe skeletal II patterns). Variations of lip shape (long to short), lip protuberance (everted to inverted), and nasolabial angle (obtuse to acute) were present. Orthodontic treatment affected the shape of the hard and soft tissue significantly (p < 0.0001). T2 showed significant uprighting of upper incisors (17.5o) and lower incisors (3.7o), improved NLA (8o), an increase in upper lip thickness (1.5 mm), and a reduction in lower lip thickness (0.7 mm) (p < 0.05). CONCLUSION: Vertical and anteroposterior shape variations were found. Orthodontic treatment had an impact on both hard and soft tissue shapes. Hence, understanding both the hard and soft tissue shape variations and the orthodontic treatment changes is crucial for an accurate diagnosis and treatment plan to achieve a successful outcome and excellent patient satisfaction.

The combination of the horizontal and vertical dimensions in mental time representation: the existence of a spatial mental map of time.

Horizontal and vertical representations of time (past-left or down and future-right or top) have been demonstrated. However, only a few studies have investigated the existence of a spatial map of time, considering it as the interaction of different spatial dimensions in space. The aim of this study was to investigate the existence of a mental time representation along the diagonal axes, intended as the combination of the horizontal and the vertical dimensions. Seventy-nine Italian participants (85% females; mean age = 25.11 ± 4.86 years; 77 right-handed) performed an online temporal judgment task using 20 Italian temporal expressions presented either always in the center (Experiment 1) or in the four corners of the screen (Experiment 2) and two pairs of response keys ("C" and "U" for the positive diagonal; "R" and "N" for the negative diagonal). Results showed spatial-temporal associations in positive (i.e., time was represented from left-bottom to right-top) and negative (i.e., time was represented from left-top to right-bottom) diagonals, although in Experiment 2 these associations were weak for the negative diagonal. These spatial-temporal associations along both diagonals were confirmed even when participants were free to place different temporal stimuli along a diagonally drawn line, in a Time-to-Position task, indicating that the temporal expressions could be ordered linearly along the diagonal spaces. Finally, these data indicated that the horizontal information was mainly used for determining the spatial-temporal associations along both diagonals, whereas the vertical information was flexible with a bottom-to-top (for positive diagonal) and top-to-bottom (for negative diagonal) temporal representation.

Reabilitação oral com próteses parciais removíveis após restabelecimento de dimensão vertical de oclusão e tratamento multidisciplinar: relato de caso / Oral rehabilitation with removable partial dentures after restoration of the vertical dimension of occlusion and multidisciplinary treatment: case report

As próteses parciais removíveis (PPRs) são uma alternativa de tratamento viável na prática clínica para reabilitar arcos parcialmente desdentados. Entretanto, o planejamento dessas próteses e preparo bucal prévio são frequentemente negligenciados. O presente artigo tem como objetivo relatar o caso clínico de uma reabilitação oral com PPRs superior e inferior após abordagem multidisciplinar, de modo a enfatizar as fases de um planejamento criterioso e de preparo prévio dos dentes pilares, visando o sucesso e a longevidade da reabilitação. Paciente do sexo masculino de 57 anos de idade compareceu à clínica da Faculdade de Odontologia de Bauru, Universidade de São Paulo, queixando-se da estética de seu sorriso e de algumas ausências dentárias. O indivíduo utilizava uma PPR provisória inferior insatisfatória e apresentava perda de dimensão vertical de oclusão (DVO). Após o exame clínico, radiográfico e estudo do caso em articulador semi-ajustável, realizou-se o planejamento com abordagens restauradoras, endodônticas, periodontais e protéticas. Após tratamento periodontal, foi realizada endodontia dos elementos 12, 15 e 47, confecção de núcleos e coroas nos dentes 12 e 15, restauração a nível gengival para apoio residual no dente 47, restaurações nos dentes 11, 13, 22, 24 e 44 e, por fim, a confecção das PPRs superior e inferior. A abordagem multidisciplinar utilizada neste caso clínico viabilizou o restabelecimento da DVO e possibilitou o sucesso da reabilitação protética(AU)

Removable partial dentures (RPDs) are a viable treatment alternative in clinical practice to rehabilitate partially edentulous arches. However, the planning of these dentures and prior oral preparation are often neglected. This article aims to report the clinical case of an oral rehabilitation with upper and lower RPDs after a multidisciplinary approach, to emphasize the phases of careful planning and prior preparation of the abutment teeth, aiming at the success and longevity of the rehabilitation. A 57-year-old male patient came to the clinic of the Bauru School of Dentistry, University of São Paulo, complaining about the esthetics of his smile and some missing teeth. The subject was using an unsatisfactory lower provisional prosthesis and had a loss of vertical dimension of occlusion (OVD). After the clinical and radiographic examination and the case study in a semi-adjustable articulator, planning was carried out with restorative, endodontic, periodontal and prosthetic approaches. After periodontal treatment, endodontics were performed on elements 12, 15 and 47, creation of cores and crowns on teeth 12 and 15, restoration at the gingival level for residual support on tooth 47, restorations on teeth 11, 13, 22, 24 and 44 and, finally, the making of the upper and lower PPRs. The multidisciplinary approach used in this clinical case enabled the restoration of the OVD and enabled the success of the oral rehabilitation(AU)

Envelhecimento bucal precoce e suas consequências para a cavidade oral com foco em reabilitação com resina composta: relato de caso / Early oral aging and its consequences for the oral cavity focusing on rehabilitation with composite resin: case report

O envelhecimento bucal precoce apresenta cada vez uma maior incidência nos consultórios odontológicos e sua degradação aos tecidos orais exige uma atenção por parte do cirurgiãodentista devido ao seu alto grau de complexidade. Esse envelhecimento precoce é causado principalmente por hábitos parafuncionais, dieta ou ambos. Suas consequências são desgastes patológicos dos tecidos dentários, extrusão passiva, perda de dimensão vertical e comprometimento estético e funcional. Por conta disso, o presente estudo teve como objetivo realizar um relato de caso clínico em um paciente jovem e com queixa estética como consequência de hábitos parafuncionais, aonde foram realizados uma reabilitação oral envolvendo aumento da dimensão vertical de oclusão através de Table Tops sem desgastes dentários e restaurações estéticas, ambas com resina composta. Essa reabilitação devolveu a DVO da paciente, trazendo conforto, contatos estáveis, guias de desoclusão e satisfação estética e funcional por parte da paciente(AU)

Early oral aging has an increasing incidence in dental offices and its degradation to oral tissues requires attention from the dentist due to its high degree of complexity. This premature aging is mainly caused by parafunctional habits, diet, or both. Its consequences are pathological wear of dental tissues, passive extrusion, loss of vertical dimension and aesthetic and functional impairment. Because of this, the present study aims to carry out a clinical case report in a young patient with an aesthetic complaint as a result of parafunctional habits, where an oral rehabilitation was carried out involving an increase in the vertical dimension of occlusion through Table Tops without dental wear and aesthetic restorations, both with composite resin. This rehabilitation returned the patient's OVD, bringing comfort, stable contacts, disocclusion guides and aesthetic and functional satisfaction on the part of the patient(AU)

Increased vertical dimension of occlusion for varying periods differentially impairs learning and memory in guinea pigs.

There is an increasing number of studies showing that occlusal dysfunction impairs learning and memory. We previously demonstrated that the brain has a mechanism to calibrate between the activities of spindle afferents and periodontal-mechanoreceptor afferents for controlling the chewing movement, and the accurate calibration can be done only at the proper vertical dimension of occlusion (VDO). Then, the chewing at an inappropriate VDO may induce a severe mental stress due to a mal-calibration. However, it is not clear how the impairment of learning/memory progresses over the period of stress induced by occlusal dysfunction. We investigated by passive avoidance test how the behavior and learning/memory are altered in guinea pigs in which the VDO was raised by 2-3 mm over the period up to 8 weeks. We found that the guinea pigs reared under the raised occlusal-condition (ROC) for 1 week showed a very high sensitivity to electrical stimulation whereas this did not cause the memory consolidation in the 1st-day retention trial, suggesting that such hypersensitivity rather hampered the fear learning. In the guinea pigs reared under the ROC for 2 and 8 weeks, the learning ability was not largely affected and memory consolidation occurred similarly whereas the memory retention deteriorated more severely in the latter guinea pigs than in the former ones. In the guinea pigs reared under the ROC for 3 and 4 weeks, learning was severely impaired, and memory consolidation did not occur. These results suggest that the occlusal dysfunction for varying periods differentially impairs learning and memory.

[Restorative treatment of generalized tooth wear]. / Restauratieve behandeling van gegeneraliseerde gebitsslijtage.

A 24-year-old patient with generalized tooth wear was referred to the Radboud Tooth Wear Project. The tooth wear had a chemical aetiology, caused by gastro-oesophageal reflux and resulting in functional problems of the masticatory system and a reduced quality of life. The treatment of the patient was minimally invasive, with directly applied composite restorations on all teeth, by means of which an increase of vertical dimension of occlusion was introduced. The restorative treatment was not preceded by testing of the new vertical dimension of occlusion. The patient was able to function well again after restorative treatment.

A fully digital workflow to register maxillomandibular relation using a jaw motion tracer for fixed prosthetic rehabilitation: A technical report.

OBJECTIVE: This technique aimed to describe a fully digital workflow to register maxillomandibular relation for fixed prosthetic rehabilitation. CLINICAL CONSIDERATIONS: Mandibular kinematics could be reproduced in a four-dimensional (4D) virtual patient based on the intraoral scan, facial scan, cone beam computed tomography, and jaw motion trajectory, which helped record centric relation and determine a proper occlusal vertical dimension in a virtual environment. The therapeutic position could be exported directly to the dental computer-aided design software for digital waxing design with a facial scan. The 4D virtual patient was also used to verify the functional and esthetic outcomes of provisional restorations. CONCLUSIONS: This novel approach digitized the process of determination, delivery, and double-check of maxillomandibular relation, thus contributing to the establishment of a completely digital workflow for fixed prosthetic rehabilitation. CLINICAL SIGNIFICANCE: Registration of maxillomandibular relation, including centric relation and occlusal vertical dimension is critical to the success of prosthetic rehabilitation. Traditional procedures are complex and time-consuming, and heavily rely on the clinical experience of dentists. A fully digital approach to creating a 4D virtual patient and registering the maxillomandibular relation is established, which guides to determine a proper occlusal vertical dimension in centric relation. Digital delivery and double-check can simplify the conventional procedure and ensure that the determined maxillomandibular relation is reliable.

Cephalometric evaluation of deep overbite correction using anterior bite turbos.

OBJECTIVES: To evaluate the outcome of treating deep overbite (OB) using anterior bite elevators concurrently with a pre-adjusted edgewise appliance. MATERIALS AND METHODS: The Case Western Reserve University (CWRU) cephalometric analysis was used to isolate tipping movement of upper (TUI) and lower incisors (TLI), bodily tooth movement of upper (BUI), and lower incisors (BLI), as well as vertical skeletal changes in the anterior region of the maxilla (MXSK) and mandible (MNSK). Thirty treated subjects were examined at pretreatment (T1) and posttreatment (T2) and compared to an untreated control group matched on age, sex, and Angle malocclusion from the Bolton Brush Growth Study Collection (CWRU, Cleveland, Ohio). RESULTS: Overbite (OB) in the treated group was decreased significantly (P < .001) (-5.6 mm) compared to controls. Statistically significant (P < .001) changes were found for BUI (-0.7 mm), TUI (0.9 mm), TLI (-1.4 mm), BLI (-1.1 mm), and MNSK (-1.6 mm). Most of the overbite correction was in the lower arch and included tipping and intrusion of the lower incisors along with an increase in lower vertical facial height. CONCLUSIONS: Deep OB correction was achieved efficiently using anterior bite elevators with pre-adjusted edgewise appliance. Correction using bite turbos would be a treatment option for individuals presenting with decreased lower facial height and deep bite.

Elderly-friendly indoor vertical dimensional layout method based on joint mobility.

INTRODUCTION: The vertical dimensional arrangement of space is primarily influenced by the reachable range of human fingertips. Currently, this dimensional layout analysis concentrates solely on static body dimensions based on Farley's principle. However, the joint mobility of the elderly population has diminished, necessitating the identification of the factors influencing the age-friendly spatial vertical dimension layout through experimentation. METHODS: A random sample of 62 adults and 62 elderly individuals were selected to measure the joint mobility of 8 groups with varying comfort levels. The measurement results were analyzed using an independent sample t-test with SPSS software. RESULTS: The joint mobility of the elderly group exhibited a notable difference from that of the adult group across distinct comfort gradients. A significant reduction in the range of motion of all joints in the elderly was observed. The findings suggest that the reachable range of the upper limbs of the elderly should be considered in conjunction with joint mobility. We propose a vertical dimensional layout method for residential spaces that accommodates the joint mobility of elderly users. CONCLUSION: The joint mobility of the elderly is significantly deteriorating, and the traditional vertical spatial layout method cannot adequately support the daily life of the elderly. It is essential to integrate the joint mobility factor into the vertical dimensional layout design process. In this paper, we propose an elderly-friendly vertical spatial dimension layout method. It offers a reference for subsequent planning of elderly-friendly vertical dimension layout.

Correlation of index finger length to vertical dimensions of occlusion for edentulous patients and their satisfaction: a randomized controlled trial.

The prevalence of edentulism is pandemic and people resort to complete dentures for the restoration of missing teeth and esthetics. However, the determination of the correct occlusal vertical dimensions (OVD) constitutes to play an important role in overall patient satisfaction. The objective of this study was to apply anthropometric methods to correlate the length of index finger (2D) to measure the OVD from base of the nose to the base of the chin (Sn-Me) and to assess satisfaction by comparing both the methods. A total of 80 edentulous patients were randomized and controlled for this trial into experimental and control groups. A correlation was found between Sn-Me and finger measurements, dentures' satisfaction was assessed after a 1-week follow-up and marked according to the Visual Analog Scale. Our findings established that finger measurements are greater among males, and in both genders, positive, and statistically significant correlations exist between the facial and finger length measurements. Moreover, 97.0% patients from experimental group were satisfied with the use of complete dentures through the new anthropometric method. Hence measuring the length of index finger can be an adjunct method for the restoration of OVD and is a relatively time-effective and simple method with a satisfactory follow-up.Trial registration: ID: NCT05153213 ( https://clinicaltrials.gov/ct2/show/NCT05153213 ).

Short-term effect of orthodontic clear aligners on muscular activity and occlusal contacts: A cohort study.

INTRODUCTION: The simultaneous presence of maxillary and mandibular clear aligners alters the vertical dimension and the quantity and quality of occlusal contacts. Few data in the literature explain how this occurs and the effects on neuromuscular coordination. This study aimed to evaluate occlusal contacts and muscular balance during treatment with clear aligners over a short follow-up time. METHODS: Twenty-six female adult patients were enrolled in this study. The center of occlusal force (COF) was evaluated using a T-Scan II device, whereas muscular symmetry and balance were determined through surface electromyography using a standardized protocol that reduces anthropometric and electrode variations. Both evaluations were performed in centric occlusion and with aligners worn before treatment, after 3 months, and after 6 months. RESULTS: A statistically significant variation in COF position was reported in the sagittal plane but not in the transverse plane. The shift in the COF position was followed by a change in muscular balance evaluated through surface electromyography. CONCLUSIONS: Treatment with clear aligners resulted in an anterior shift of the COF when biting in centric occlusion and a posterior shift when the aligners were worn in healthy female patients after 6 months of observation. This change in occlusal contact was followed by an improvement in muscular function symmetry in the short term when aligners were worn, compared with the centric occlusion during treatment.

Digital jaw relation recording to evaluate a new vertical dimension of occlusion using CAD/CAM-fabricated tooth-colored splints: a case report.

Pronounced defects of the dental hard tissue can be caused by different etiologic factors. Most frequently, they are associated with changes in the vertical dimension of occlusion (VDO), which may also influence the condylar positions. These defects can lead to irreversible loss of tooth structure and have dramatic functional and esthetic consequences, often requiring complex rehabilitation. In this situation, CAD/CAM-fabricated occlusal splints made of tooth-colored polycarbonate are a proven and safe pretreatment approach in terms of esthetics and function. Rebuilding lost dental hard tissue to restore the occlusion and VDO to an adequate condylar position is a prerequisite for any sustainable and functional rehabilitation. In the future, digital systems will support this complex process, customizing it and making it simpler and more precise. The DMD-System (Ignident) provides patient-specific jaw movement data to optimize the CAD/CAM workflow. This system allows real movement patterns to be digitized and analyzed for functional and potential therapeutic purposes, integrating them into the dental and laboratory workflow. In the present case, the familiar tooth-colored CAD/CAM-fabricated occlusal splint is supplemented by digital centric jaw relation recording and individual movement data.