Eco-friendly chitosan microspheres as a novel one-step sorbent for the rapid purification and determination of pesticides and veterinary drug multi-residues in aquatic products with HPLC-MS/MS.

A modified QuEChERS method was developed to determine multi-class pesticide and veterinary residues in aquatic products. Chitosan microspheres were conveniently synthesized and utilized as the cleanup adsorbent in the QuEChERS procedure, showcasing rapid filtration one-step pretreatment ability for the determination of drug multi-residues in aquatic products. Compared to conventional synthetic sorbents, chitosan microspheres not only have good purification performance, but also have renewable and degradable properties. This novel sorbent worked well in the simultaneous determination of 95 pesticides and veterinary drug residues in aquatic products after being combined with an improved one-step vortex oscillating cleanup method. We achieved recoveries ranging from 64.0% to 115.9% for target drugs in shrimp and fish matrix. The limits of detection and quantification were 0.5-1.0 and 1.0-2.0 µg kg-1, respectively. Notably, hydrocortisone was detected with considerable frequency and concentration in the tested samples, underscoring the necessity for stringent monitoring of this compound in aquatic products.

L-cysteine mediated rapid separation of Hg2+ and MeHg+ by anion-exchange HPLC.

Owing to the on-going emission of Hg into the global environment, new insight into their bioinorganic chemistry in mammals is urgently required to better understand their adverse health effects and analytical methods to quantify Hg2+ and MeHg+ in environmental samples are needed. Analytical separations can help to address both of these needs. While Hg2+ and MeHg+ have been most frequently separated by cation and reversed-phase (RP) HPLC, we here report on using anion-exchange (AEX) HPLC in conjunction with a flame atomic absorption spectrometer (FAAS) to observe the retention behavior of these mercury species in the pH range 5.0-8.0 using mobile phases comprised of 10 mM l-cysteine (Cys) in 100 mM phosphate buffer. The results obtained for pH 5.0 served as a starting point to develop a rapid HPLC separation for these mercurials. The addition of 5-20 % methanol (MeOH) to this mobile phase revealed that MeOH did not appreciably change the retention of Hg2+, but significantly reduced the retention of MeHg+. A 15 % MeOH-containing mobile phase offered the best compromise between achieving a rapid baseline separation in <400 s at affordable costs. To assess the suitability and robustness of the developed AEX-HPLC separation method for the analysis of environmental samples an inductively coupled plasma atomic emission spectrometer (ICP-AES) was employed as the mercury-specific detector. The developed AEX-HPLC-ICP-AES method allowed to achieve detection limits of 1.5 ppm for Hg2+ and 2.9 ppm for MeHg+ and was successfully applied to analyze wastewater that had been spiked with Hg2+ and MeHg+.

Examining the efficacy of biological filters in the removal of agricultural pesticides and nutrient elements from agricultural drainage water.

The high water consumption in agriculture has led to an obvious water crisis in this sector, and the use of unconventional water sources, especially agricultural drains, is considered necessary. For this purpose, the present study was carried out to evaluate the efficiency of biological filters with different types of substrates for treating agricultural wastewater in Khuzestan province, located in the south of Iran, to use receptive resources and reuse them in agriculture. Next, the efficiency of four types of biological filters for treating agricultural drainage water with different retention times was evaluated. Sawdust, cotton stalks, wheat straw, stubble, and rice husk were used as filters. Qualitative factors included agricultural pesticides (Atrazine, Randup, Paraquat, and 2, 4-D) and nutrients (nitrate, nitrogen, phosphate, and phosphorus). By examining the trend of increasing the retention time and the corresponding removal percentage, it was observed that the retention time has a direct relationship with the amount of removal efficiency of nutrients and agricultural toxins. As the residence time increases, the average amount of nutrient compounds in different filters decreases, and their removal percentage increases. The highest removal percentage of nitrate, total nitrogen, phosphate, and total phosphorus was 74.03, 71.66, 57.97, and 61.85% in the sawdust filter and was assigned to 10 days. The highest percentage of removal of Atrazine, Tofudi, Paraquat, and Roundup toxins with a removal efficiency of 91.73, 84.27, 89.81, and 88.46% was also observed in the treatment of sawdust for 10 days. The sawdust filter showed a good performance in removing the parameters of agricultural toxins and nutrient compounds in a retention time of 10 days compared to other filters and retention times. As a general result, the sawdust filter can be cited as a reliable substrate with acceptable efficiency compared to other filters.

A vortex-assisted MSPD method for the extraction of Polycyclic Aromatic Hydrocarbons from shrimp with determination by GC-MS/MS.

Polycyclic Aromatic Hydrocarbons (PAHs) are organic compounds with two or more condensed aromatic rings, formed from incomplete organic matter combustion. PAHs pose potential health risks due to their carcinogenic and mutagenic properties, accumulating in edible tissues of aquatic organisms, such as shrimp, which is extensively produced in the southern region of Rio Grande do Sul state (Brazil) and it is the most consumed seafood globally. Therefore, this study aimed to optimize and validate an analytical method for extracting 16 priority PAHs from shrimp samples using Vortex-Assisted Matrix Solid-Phase Dispersion (VA-MSPD) with determination by Gas Chromatography Tandem Mass Spectrometry (GC-MS/MS). The optimized method, which uses a reused solid support, was validated according to INMETRO and SANTE guidelines. PAHs demonstrated adequate linearity with correlation coefficients > 0.99. The matrix effect was assessed, and 12 out of the 16 PAHs showed a matrix effect of less than ±20%. The method's quantification limits ranged from 6.67 to 33.35 ng g-1. Accuracy and precision showed recovery values ranging from 55 to 115% with relative standard deviation (RSD) lower than 17% for all PAHs. In the applicability, 11 PAHs were detected, such as benzo[a]pyrene and benzo[b]fluoranthene, and the ∑PAHs ranged from 25.14 to 79.52 ng g-1, confirming the environmental contamination in the region and the need for monitoring these contaminants in shrimp destined for human consumption.

Magnetic conjugated microporous polymer for rapid extraction and sensitive analysis of environmental endocrine disruptors in environmental waters and dairy products.

BACKGROUND: Environmental endocrine disruptors (EEDs) are a class of new pollutants that are diffusely used in the medical industry and animal husbandry. In view of toxicity concerns, elevated levels of EEDs in the environment and food, which cause potential harm to human beings and ecosystems, must be monitored. Determination of EEDs contaminants to ensure environment and food safety has became a major concern worldwide, it is also a challenging task because of their trace level and probable matrices interference. Thus, developing rapid adsorption and efficient analysis methods for EEDs is apparently necessary. RESULTS: A magnetic conjugated micro-porous polymer (Fe3O4@TbDt) was designed and synthesized, which was endowed with large specific surface area, rich functional groups and magnetic responsiveness. The material showed high extraction efficiency for EEDs via magnetic solid-phase extraction (MSPE). The quantum chemistry calculations showed the adsorption mechanism of Fe3O4@TbDt on EEDs mainly included electrostatic interactions, van der waals forces (N-H … π interaction, C-H … π interaction), and multiple hydrogen bonds. Finally, a trace analysis method for nine EEDs was established combined with HPLC-MS/MS under optimized MSPE conditions. The method showed a good linearity (R2 ≥ 0.996), low limits of detection (0.25-5.1 ng L-1), high precision (RSD of 1.1-8.2 %, n = 6). The applicability of this method was investigated by analyzing four water samples and two dairy products, and satisfactory recovery rates (82.1-100.7 %) were obtained. The proposed method showed the potential for the analysis of EEDs residues in food and environmental samples. SIGNIFICANCE: The developed MSPE method based on conjugated micro-porous polymers (CMPs) is simple, green, and efficient compared to existing techniques. The application of CMPs provides a new idea for preparing versatile sample pre-treatment materials. What's more, this work has certain reference value for addressing of EEDs residues in the environment and food.

A solar-driven nanocellulose Janus aerogel with excellent floating stability and dual functions of oil-water separation and photocatalytic degradation of organic pollutants.

Effective and practical cleanup of viscous crude oil spills is extremely important in real harsh marine environments. Herein, we designed a solar-driven, nanocellulose-based Janus aerogel (Janus-A) with excellent floating stability and dual function of oil-water separation and degradation of aqueous organic pollutants. Janus-A, with its amphiprotic nature, was prepared through polypyrrole (PPy) deposition, freeze-drying, octyltrichlorosilane (OTS) impregnation, TiO2 spraying on the bottom surface, and UV irradiation treatment. The photothermal conversion effect of PPy coating raised the surface temperature of aerogel to 75.8 °C within 6 min under one simulated solar irradiation, which greatly reduced the viscosity of the crude oil and increased the absorption capacity of the aerogel to 36.7 g/g. Benefiting from the balance between the buoyancy generated by the hydrophobic part and water absorption of the hydrophilic part, Janus-A showed excellent floating stability under simulated winds and waves. In addition, Janus-A exhibited high degradation efficiency for organic pollutants in water owing to the synergistic photocatalytic properties of TiO2 and PPy. These excellent performances make Janus-A ideal for integrated water-oil separation and water remediation.

Lignin and functional polymer-based materials: Synthesis, characterization and application for Cr (VI) and As (V) removal from aqueous media.

In this study, lignin derived from corncobs was chemically modified by substituting the hydroxyl groups present in its structure with methacrylate groups through a catalytic reaction using methacrylic anhydride, resulting in methacrylated lignin (ML). These MLs were incorporated in polymerization reaction of the monomer 2-[(acryloyloxy)ethyl trimethylammonium] chloride (Cl-AETA) and Cl-AETA, Cl-AETA/ML polymers were obtained, characterized (spectroscopic, thermal and microscopic analysis), and evaluated for removing Cr (VI) and As (V) from aqueous media in function of pH, contact time, initial metal concentrations and adsorbent amount. The Cl-AETA/ML polymers followed the Langmuir adsorption model for the evaluated metal anions and were able to remove up to 91 % of Cr (VI) with a qmax (maximum adsorption capacity) of 201 mg/g, while for As (V), up to 60 % could be removed with a qmax of 58 mg/g. The results demonstrate that simple modifications in lignin enhance its functionalization and properties, making it suitable for removing contaminants from aqueous media, showing promising results for potential future applications.

Revolutionizing wastewater treatment: A review on the role of advanced functional bio-based hydrogels.

Water contamination poses a significant challenge to environmental and public health, necessitating sustainable wastewater treatment solutions. Adsorption is one of the most widely used techniques for purifying water, as it effectively removes contaminants by transferring them from the liquid phase to a solid surface. Bio-based hydrogel adsorbents are gaining popularity in wastewater treatment due to their versatility in fabrication and modification methods, which include blending, grafting, and crosslinking. Owning to their unique structure and large surface area, modified hydrogels containing reactive groups like amino, hydroxyl, and carboxyl, or functionalized hydrogels with inorganic nanoparticles particularly graphene nanomaterials, have demonstrated promising adsorption capabilities for both inorganic and organic contaminants. Bio-based hydrogels have excellent physicochemical properties and are non-toxic, environmentally friendly, and biodegradable, making them extremely effective at removing contaminants like heavy metal ions, dyes, pharmaceutical pollutants, and organic micropollutants. The versatility of hydrogels allows for various forms to be used, such as films, beads, and nanocomposites, providing flexibility in handling different contaminants like dyes, radionuclides, and heavy metals. Additionally, researchers also have shown the potential for recycling and regenerating post-treatment hydrogels. This approach not only addresses the challenges of wastewater treatment but also offers sustainable and effective solutions for mitigating water pollution.

Preparation of low-cost sludge-based highly porous biochar for efficient removal of refractory pollutants from agrochemical and pharmaceutical wastewater.

Producing a high-performance sludge biochar through a feasible method is a great challenge and is crucial for practicability. Herein, we reported a highly porous sludge biochar synthesized from agrochemical-pharmaceutical and municipal sludge blends through a novel pyrolysis-acid treatment-post pyrolysis method. The optimized biochar named ASMS91 obtained interconnected pores with a total pore volume of 0.894 cm3/g and a surface area of 691.4 m2/g through extended acid wash and subsequent post-pyrolysis, which is superior to non-activated sludge biochar. ASMS91 removed 45.3 % of wastewater COD (156 mg/L) in 24 h, which was rapid and higher performance than commercial activated carbon (1000 iodine number). This outstanding performance is due to its high adsorption ability of long-chain aliphatic compounds (e.g., 2,4-Di-tert-butylphenol, neophytadiene and eicosane) into mesopores, which accounts for 71.8 % of pore filling. ASMS91 was highly recyclable, and adsorption was reduced by only 5.3 % after the 4th cycle. It also outperformed other sludge biochar in literature in removing perfluorooctanoic acid (PFOA), 6:2 fluorotelomer sulfonate (6:2 FTS), sulfamethoxazole, methylene blue, and methylene orange. Finally, the feasibility of our proposed method was validated by a brief techno-economic analysis. This feasible approach may support future research regarding sludge valorization and low-cost chemical wastewater treatment.

Efficient adsorption of cationic dyes by a novel honeycomb-like porous hydrogel with ultrahigh mechanical property.

The optimization of hydrogel structure is crucial for adsorption capacity, mechanical stability, and reusability. Herein, a chitosan and laponite-XLS co-doped poly(acrylic acid-co-acrylamide) hydrogel (CXAA) with honeycomb-like porous structures is synthesized by cooperative cross-linking of 2-hydroxypropyltrimethyl ammonium chloride chitosan (HACC) and laponite-XLS in reticular frameworks of acrylic acid (AAc) and acrylamide (AM). The CXAA exhibits extraordinary mechanical performances including tough tensile strength (3.36 MPa) and elasticity (2756 %), which facilitates recycling in practical adsorption treatment and broadens potential applications. Since the regular porous structures can fully expose numerous adsorption sites and electronegative natures within polymer materials, CXAA displays efficient and selective adsorption properties for cationic dyes like methylene blue (MB) and malachite green (MG) from mixed pollutants and can reach record-high values (MB = 6886 mg g-1, MG = 11,381 mg g-1) compared with previously reported adsorbents. Therefore, CXAA exhibits promising potential for separating cationic and anionic dyes by their charge disparities. Mechanism studies show that the synergistic effects of HACC, laponite-XLS, and functional groups in monomers promote highly efficient adsorption. Besides, the adsorption capacity of CXAA remains stable even after undergoing five cycles of regeneration. The results confirm that CXAA is a promising adsorbent for effectively removing organic dyes in wastewater.

Great truths are always simple: A millimeter-sized macroscopic lanthanum-calcium dual crosslinked carboxymethyl chitosan aerogel bead as a promising adsorbent for scavenging oxytetracycline from wastewater.

Given their increasing environmental and health harms, it is crucial to develop green and sustainable techniques for scavenging antibiotics represented by oxytetracycline (OTC) from wastewater. In the present work, a structurally simple lanthanum-calcium dual crosslinked carboxymethyl chitosan (CMCS-La3+-Ca2+) aerogel was innovatively synthesized for adsorptive removal of OTC. It was found that CMCS and La3+ sites collaboratively participated in OTC elimination, and OTC removal peaked over the wide pH range of 4-7. The process of OTC sorption was better described by the pseudo-second-order kinetic model and Redlich-Peterson model, and the saturated uptake amount toward OTC was up to 580.91 mg/g at 303 K, which was comparable to the bulk of previous records. The as-fabricated composite also exerted exceptional capture capacity toward OTC in consecutive adsorption-desorption runs and high-salinity wastewater. Amazingly, its packed column continuously ran for over 60 h with a dynamic uptake amount of 215.21 mg/g until the adsorption was saturated, illustrating its great potential in scale-up applications. Mechanism studies demonstrated that multifarious spatially-isolated reactive sites of CMCS-La3+-Ca2+ cooperatively involved in OTC capture via multi-mechanisms, such as n-π EDA interaction, H-bonding, La3+-complexation, and cation-π bonding. All the above superiorities endow it as a promising adsorbent for OTC-containing wastewater decontamination.

Machine learning based-model to predict catalytic performance on removal of hazardous nitrophenols and azo dyes pollutants from wastewater.

To maintain human health and purity of drinking water, it is crucial to eliminate harmful chemicals such as nitrophenols and azo dyes, considering their natural presence in the surroundings. In this particular research study, the application of machine learning techniques was employed in order to make an estimation of the performance of reduction catalysis in the context of ecologically detrimental nitrophenols and azo dyes contaminants. The catalyst utilized in the experiment was Ag@CMC, which proved to be highly effective in eliminating various contaminants found in water, like 4-nitrophenol (4-NP). The experiments were carefully conducted at various time intervals, and the machine learning procedures used in this study were all employed to forecast catalytic performance. The evaluation of the performance of such algorithms were done by means of Mean Absolute Error. The noteworthy findings of this research indicated that the ADAM and LSTM algorithm exhibited the most favourable performance in the case of toxic compounds i.e. 4-NP. Moreover, the Ag@CMC catalyst demonstrated an impressive reduction efficiency of 98 % against nitrophenol in just 8 min. Thus, based on these compelling results, it can be concluded that Ag@CMC works as a highly effective catalyst for practical applications in real-world scenarios.

Preparation of chitosan resin by two-step crosslinking method and its adsorption for palladium in wastewater.

To preserve the activity of amine groups on chitosan, chitosan resin (CR) was synthesized using the reversed-phase suspension two-step crosslinking method for the adsorption of palladium from wastewater. The effects of varying the amounts of chitosan, liquid paraffin, ethyl acetate, formaldehyde solution, and epichlorohydrin on the adsorption capacity of CR were investigated using both single-factor experiments and response surface methodology. The preparation conditions for the chitosan resin were optimized, and its adsorption properties were systematically evaluated. The results indicated that CR exhibited a high saturated adsorption capacity for palladium, reaching 195.22 mg·g-1. The adsorption kinetics followed the pseudo-second-order model, while the adsorption isotherms were well described by the Sips model. Thermodynamic analysis demonstrated that the adsorption process was spontaneous and endothermic. Furthermore, CR maintained exceptional stability, with a palladium removal efficiency exceeding 99.8 % even after eight adsorption-desorption cycles. The primary adsorption mechanism is attributed to the interaction between palladium ions and the protonated amino groups of the chitosan resin.

Novel polyvinyl alcohol/gum tragacanth molecularly imprinted-electrospun nanofibers as adsorbent for selective solid phase extraction of bisphenol A.

A polyvinyl alcohol/gum tragacanth molecularly imprinted nanofiber fabricated by electrospinning (PVA/GT-MIN) was used as an efficient adsorbent for the solid phase extraction (SPE) of bisphenol A (BPA) in water samples. PVA and GT were functional polymers and BPA was the template for molecular imprinting. BPA was bound to the polymer matrix through hydrogen bonding. The SEM image of PVA/GT-MIN demonstrated a rough morphology with pores and a diameter of 501 nm. The data for the adsorption of BPA on PVA/GT-MIN fitted the Freundlich isotherm and pseudo-second-order kinetics models. The proposed SPE using PVA/GT-MIN coupled with high performance liquid chromatography-diode array detection presented good linearity from 50 µg/L-5 mg/L (R2 = 0.9999) and yielded a limit of detection of 21 µg/L. The PVA/GT-MIN was applied to extract bottled water for BPA analysis and recoveries were 93.1-97.7 % (RSDs ≤ 3.6 %). This study presents a novel, easily prepared PVA/GT-MIN adsorbent for the extraction of BPA in water.

Development of banana pseudo stem cellulose fiber based magnetic nanocomposite as an adsorbent for dye removal.

A hybrid hydrogel nanocomposite derived from cellulose fiber extracted from Banana Pseudo Stem (BPS) was developed as an adsorbent material for wastewater treatment. The hydrogel was developed by graft copolymerization of N-hydroxyethylacrylamide on Cellulose Fiber (BPSCF-g-PHEAAm) with potassium peroxodisulphate (KPS) as an initiator and N, N'-methylene bisacrylamide (MBA) as a crosslinker using microwave irradiation. Magnetic nanoparticles generated by an in-situ method were incorporated into the network structure. Fourier Transform Infrared Spectroscopy (FTIR), Powder X-ray Diffraction (XRD), Thermogravimetric analysis (TGA), Vibrating Sample Magnetometer (VSM), Brunauer-Emmett-Teller analysis (BET), Field Emission Scanning Electron Microscopy (FESEM), and Energy Dispersive Spectrometer (EDS) were employed. The adsorption capacities of hydrogel and its nanocomposite were evaluated using Methylene Blue (MB) and Crystal Violet (CV) as model dyes. The parent gel exhibited the maximum absorption capacity of 235, and 219 mg g-1 towards MB and CV respectively which was enhanced to 320 and 303 mg g-1 for the nanocomposite. Adsorption data were best fitted with the pseudo-second-order kinetic model and the Freundlich isotherm model. Negative ΔG° and positive ΔH° indicated spontaneous and endothermic adsorption. Desorption was effective to an extent of 99 % in the HCl medium suggesting high reusability potential of the developed adsorbent material.

Adsorption of ciprofloxacin from aqueous solutions using cellulose-based adsorbents prepared by sol-gel method.

Ciprofloxacin (CIP) is one of the most widely used antibiotics to treat bacterial infections. Consequently, there is concern that it may contaminate water resources due to its high usage level. It is therefore necessary to monitor, trace, and reduce exposure to these antibiotic residues. In the current study, the extraction of CIP from water was performed using a green adsorbent material based on cellulose/polyvinyl alcohol (PVA) decorated with mixed metal oxides (MMO). This cellulose/MMO/PVA adsorbent was synthesized using a simple sol-gel method. The prepared adsorbent materials were then characterized using a range of methods, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, gas adsorption analysis, X-ray diffraction, and Fourier Transform infrared. The impact of pH, adsorbent dose, contact time, and CIP concentration on ciprofloxacin extraction were examined. The equilibrium and kinetic adsorption data were well described using the Freundlich model (R2 = 0.965). The optimum conditions for CIP adsorption were: pH = 4.5; adsorbent dosage = 0.55 g·L-1; contact time = 83 min; and initial CIP concentration = 2 mg·L-1. The adsorption capacity of the cellulose/MMO/PVA adsorbent for CIP removal was ∼19 mg·g-1 (CIP removal = 86.48 %). This study shows that cellulose/MMO/PVA adsorbents have potential for removing contaminants from aqueous environments.

EDAC-modified chitosan/imidazolium-polysulfone composite beads for removal of Cr(VI) from aqueous solution.

To enhance the stability and adsorption performance of chitosan in Cr(VI)-contaminated acidic wastewater, a novel EDAC-modified-EDTA-crosslinked chitosan derivative (CSEC) was synthesized via a one-pot method with chitosan, 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDAC), and Na2EDTA as raw materials. To further improve the mechanical strength and separation performance of CSEC, a novel composite bead (CSEP) of CSEC and imidazolium-functionalized polysulfone (IMPSF) was prepared through a phase inversion method. The chemical composition and microstructure of CSEC and CSEP were characterized by FESEM, FTIR, NMR and XPS techniques. The maximum adsorption capacities of CSEC and CSEP for Cr(VI) were 145.96 and 135.82 mg g-1 at pH 3, respectively, and the equilibrium time for Cr(VI) adsorption by CSEC and CSEP was 5 min and 8 h, respectively. The adsorption process of Cr(VI) by both CSEC and CSEP was exothermic and spontaneous. Compared to CSEC, CSEP has significantly enhanced resistance to interference from coexisting anions. The removal mechanism of Cr(VI) by CSEP might involve redox reaction as well as electrostatic attraction between Cr(VI) oxyanions and various nitrogen cations, including protonated amino groups, guanidinium groups, protonated tertiary amine groups, and imidazolium cations. The CSEP beads have potential application value in the treatment of acidic wastewater containing Cr(VI).

Preparation of silver-based metal-organic framework and chitosan hybrid material for removing drug and dye.

Pharmaceuticals and personal care products and dyes have low biodegradability and high toxicity, seriously threaten the human health and ecological environment. Therefore, seeking effective removal methods has become the focus of research. In this study, silver-based metal-organic framework (Ag-MOF) and chitosan (CS) hybrid adsorbent (Ag-MOF-CS) was synthesized via solvothermal one-pot synthesis to remove diclofenac sodium (DCF) and acid Red 1 (AR1) from water for the first time. The morphology and structure of Ag-MOF-CS were confirmed by various characterizations. The effect on adsorption was investigated by changing the adsorbent dosage, pH and other conditions. The adsorption kinetics, adsorption isotherms and thermodynamics were analyzed. Ag-MOF-CS showed a high adsorption capacity. And the maximum adsorption capacity of Ag-MOF-CS for DCF and AR1 was 351.75 mg/g and 678.83 mg/g, respectively. The adsorbent bound to DCF and AR1 may via electrostatic forces, π-π interactions, hydrogen bonding. Even after four cycles of Ag-MOF-CS, the DCF removal can still be higher than 80 %. The eco-friendly Ag-MOF-CS demonstrated significant potential for utilization in treating wastewater.

Construction of magnetic recoverable porous electron-rich organic frameworks for efficiently enrichment of phenylurea herbicides from water and milk samples prior to HPLC detection.

Porous electron-rich organic frameworks have attracted an increased attention in the adsorption and removal of pollutants due to their abundant electron-rich nitrogen atoms, which can effectively interact with positively charged substance. In this study, a porous electron-rich organic framework (Car-POF) and positively charged amino-functionalized magnetic nanoparticles (Fe3O4-NH2) were used to construct a magnetic electron-rich Fe3O4-NH2@Car-POF for the enrichment of some phenylurea herbicides from water and milk samples prior to high performance liquid chromatographic detection. The adsorption capacity of Fe3O4-NH2@Car-POF for the phenylureas ranged from 14.93 to 28.83 mg g-1. The LODs were observed in the range of 0.05-0.20 ng mL-1 and 0.5-1.5 ng mL-1, and LOQs in the range of 0.17-0.66 ng mL-1 and 1.7-5.0 ng mL-1 for water and milk samples with RSD less than 9.0. The adsorption studies with cationic and anionic dyes revealed that Fe3O4-NH2@Car-POF is favorable for the adsorption of positively charged compounds.

High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent.

Dyes are indispensable for the rapid development of society, but untreated dye wastewater can threaten human health. In this study, an adsorbent (SA/SL/CCS/PEI@MNPs) was synthesized by one-pot method using magnetic nanoparticles (MNPs), sodium alginate (SA), sodium lignosulfonate (SL), carboxylated chitosan (CCS) and polyethyleneimine (PEI). The adsorbent was mesoporous micrometer-sized particles with pore size of 34.92 nm, which was favorable for dynamic column experiments. SA/SL/CCS/PEI@MNPs possessed pH-responsive performance. Under acidic condition, the maximum adsorption capacities for anionic dyes (tartrazine, reactive black-5, indigo carmine) reached >550 mg/g. Under alkaline condition, those for cationic dyes (methylene blue, methyl violet, neutral red) exceeded 1900 mg/g. The function of the various modifiers was investigated. The results indicated that the incorporation of SL, CCS and PEI was able to provide plenty of sulfonate, carboxylate and amino/imine reactive groups so that adsorption capacities of dyes were improved. The adsorption mechanism was explored by FTIR and XPS. At the same time, the adsorption mechanism was more deeply analyzed using molecular dynamics simulations and radial distribution function. It was demonstrated that the dyes adsorption on the SA/SL/CCS/PEI@MNPs was mainly due to electrostatic attraction and π-π interaction. In addition, the adsorbent had good reusability, and the removal still reached over 90 % after five cycles. In conclusion, the adsorbent displayed a broad prospect for the adsorption of organic dyes.