Effectiveness of a natural coagulant based on common mallow (Malva sylvestris) in urban wastewater treatment.

This study evaluated the effectiveness of a natural coagulant based on common mallow (Malva sylvestris) to remove turbidity in urban wastewater. A 22 factorial design was selected to determine the optimal dose and the working pH of the natural coagulant. Its potential was studied in 50.0-450 mg/L and 4.00-10.0 ranges of doses and pH, respectively. A simplex lattice mixture evaluated its effectiveness as a coagulant aid combined with aluminum sulfate (conventional coagulant). Mixture proportions 0.000-1.00 were studied for each component, finding the proportion more effective. Results showed that the coagulation treatment could be feasible since a turbidity removal efficiency of 73.7% can be achieved under optimal conditions (50.0 mg/L and pH of 10.0). Likewise, a turbidity removal of 58.9% is obtained using 250 mg/L and maintaining wastewater pH (7.45). This efficiency can be increased using 31.0% natural coagulant mixed with 69.0% aluminum sulfate at 250 mg/L without modifying the wastewater pH. This improvement was associated with the natural coagulant's high molecular weight and long-chained structure since these properties enhance settling time, floc size and strength, and low sludge production. These results support using common mallow as a natural coagulant, making its use more feasible in alkaline water pH or as a coagulant aid combined with aluminum sulfate for urban wastewater treatment. A cost of USD 370/Kg of natural coagulant was estimated, which is higher than conventional coagulants. However, a cost-effectiveness analysis of its implementation should be performed since process scaling costs could significantly reduce its price.

Bioremediation of Automotive Residual Oil-Contaminated Soils by Biostimulation with Enzymes, Surfactant, and Vermicompost.

Contamination of soils by automotive residual oil represents a global environmental problem. Bioremediation is the technology most suitable to remove this contaminant from the medium. Therefore, this work aimed to evaluate the effectiveness of bioremediation of automotive residual oil-contaminated soils by biostimulation with enzymes, surfactant, and vermicompost. The bioremediation efficiency was examined using a factorial design of 24 to determine the effect of the time, pH and temperature conditions, biostimulation with enzyme-vermicompost, and biostimulation with enzyme-surfactant. Enzymes obtained from Ricinus communis L. seeds, commercial vermicompost, and Triton X-100 were used. Results showed that the highest removal efficiency (99.9%) was achieved at 49 days, with a pH of 4.5, temperature of 37 °C, and using biostimulation with enzyme-vermicompost (3% w/v-5% w/w). The addition of surfactant was not significant in increasing the removal efficiency. Therefore, the results provide adequate conditions to bioremediate automotive residual oil-contaminated soils by biostimulation using enzymes supported with vermicompost.

Use of activated carbon and camphor carbon as cathode and clay cup as proton exchange membrane in a microbial fuel cell for the bioenergy production from crude glycerol biodegradation.

This work characterizes two alternative materials to substitute the most expensive microbial fuel cells (MFCs) components: proton exchange membrane (PEM) and cathode. Crude glycerol biodegradation was studied in MFCs using a clay cup as a PEM and activated carbon and camphor carbon mixture (CAC) as a cathode. The cathode performance was compared with Platinum on carbon cloth. Two clay cup single-chamber MFCs were operated with each cathode and fed with 2000 mg/L of crude glycerol. Electrochemical properties were characterized by linear sweep voltammetry, electrochemical impedance spectroscopy, and chronoamperometry. Biodegradation efficiencies were estimated with the chemical oxygen demand (COD) removal percentage. MFCs with CAC showed a maximum power density of 100 mW/m2. This result was a 43.47% power response regarding MFCs with Platinum. COD removal efficiencies of 94% were achieved in 37 days for both cells. The Columbic efficiencies were 24.04% and 22.78% for the MFCs with Platinum and CAC. The economic analysis showed a cost of USD 9.97 for MFCs with CAC. This cost is five times lower than when using Platinum. MFCs utilizing clay cups and CAC showed an acceptable performance for the bioenergy production from crude glycerol biodegradation above all economic advantage in the cell cost.

Evaluation of a biocoagulant from devilfish invasive species for the removal of contaminants in ceramic industry wastewater.

This study evaluated the effectiveness of a biocoagulant produced from the devilfish invasive species and its combination with two chemical coagulants (aluminum sulfate and ferric sulfate) to remove turbidity, chemical oxygen demand, and total suspended solids in ceramic industry wastewater using a combined experimental design of Mixture-Process. This design optimized the coagulation process and evaluated the effects and interactions between mixture components and coagulant doses. An analysis of variance was used to analyze the experimental data obtained in the study, and the response surface plots by response type (turbidity, chemical oxygen demand, and total suspended solids) were obtained. Results showed that the coagulation treatment could be technically and economically feasible since efficiencies of turbidity, chemical oxygen demand, and total suspended solids removal of 74, 79, and 94% could be achieved using an optimal coagulant dose of 800 mg/L with a mixture of 35% biocoagulant and 65% ferric sulfate. Analysis of variance results showed that the models are significant, and the lack of fit is not required according to the probability value (p value), which were < 0.0001, and > 0.05, respectively. Hence, the experimental data were fitted to a combined reduced special cubic x linear model. These results support the use of devilfish meal as a biocoagulant, being more feasible in dual systems when mixed with ferric sulfate.

Study on the Effectiveness of Two Biopolymer Coagulants on Turbidity and Chemical Oxygen Demand Removal in Urban Wastewater.

The present study investigated the effectiveness of two biopolymer coagulants on turbidity and chemical oxygen demand removal in urban wastewater. The biopolymers were produced from vegetal biomass using the mucilage extracted from Opuntia robusta cladodes, and Uncaria tomentosa leaves. Opuntia robusta is an abundant species in Mexico, which is not edible. Uncaria tomentosa is an exotic invasive species in Mexico and other countries, which negatively affects the ecosystems where it is introduced. A combined experimental design of mixture-process was selected to evaluate the effectiveness of both biopolymer coagulants regarding aluminum sulfate (conventional chemical coagulant). Results showed turbidity and chemical oxygen demand removal efficiencies of 42.3% and 69.6% for Opuntia robusta and 17.2% and 39.4% for Uncaria tomentosa biopolymer coagulant, respectively, at a dose of 200 mg/L. Furthermore, optimum conditions from the experimental design to reach the maximum turbidity and chemical oxygen demand removal were obtained at an Opuntia robusta biopolymer coagulant concentration of 10 mg/L, showing removal efficiencies of 68.7 ± 1.7% and 86.1 ± 1.4%, respectively. These results support using Opuntia robusta as an alternative biopolymer coagulant in urban wastewater treatment.

Ibuprofen degradation and energy generation in a microbial fuel cell using a bioanode fabricated from devil fish bone char.

Ibuprofen degradation and energy generation in a single-chamber Microbial Fuel Cell (MFC) were evaluated using a bioanode fabricated from devil fish bone char (BCA) synthesized by calcination in air atmosphere. Its performance was compared with conventional carbon felt (CF). Bone char textural properties were determined by nitrogen adsorption. Before and after, the bacterial colonization on the materials was analyzed by environmental scanning electron microscopy. Energy generation was evaluated by electrochemical techniques as open-circuit potential, linear sweep voltammetry, and electrochemical impedance spectroscopy. Ibuprofen degradation was analyzed by High-Performance Liquid Chromatography-Ultraviolet, and the chemical oxygen demand (COD) removal was measured. Results showed a specific area of 136 m2/g for BCA, having enough space to immobilize microorganisms. The micrographs confirmed the biofilm formation on the electrode materials. Over the 14 days, MFC with BCA reached a maximum power density of 4.26 mW/m2, 175% higher than CF, and an electron transfer resistance 2.1 times lower than it. This coincides with the COD removal and ibuprofen degradation efficiencies, which were 43.6% and 34% for BCA and 31.8% and 27% for CF. Hence, these findings confirmed that BCA in MFC could provide an alternative electrode material for ibuprofen degradation and energy generation.