Application of artificial intelligence in modeling of nitrate removal process using zero-valent iron nanoparticles-loaded carboxymethyl cellulose.

This study explores nitrate reduction in aqueous solutions using carboxymethyl cellulose loaded with zero-valent iron nanoparticles (Fe0-CMC). The structures of this nano-composite were characterized using various techniques. Based on the characterization results, the specific surface area of Fe0-CMC measured by the Brunauer-Emmett-Teller analysis were 39.6 m2/g. In addition, Scanning Electron Microscopy images displayed that spherical nano zero-valent iron particles (nZVI) with an average particle diameter of 80 nm are surrounded by carboxymethyl cellulose and no noticeable aggregates were detected. Batch experiments assessed Fe0-CMC's effectiveness in nitrate removal under diverse conditions including different adsorbent dosages (Cs, 2-10 mg/L), contact time (t, 10-1440 min), initial pH (pHi, 2-10), temperature (T, 10-55 °C), and initial concentration of nitrate (C0, 10-500 mg/L). Results indicated decreased removal with higher initial pHi and C0, while increased Cs and T enhanced removal. The study of nitrate removal mechanism by Fe0-CMC revealed that the redox reaction between immobilized nZVI on the CMC surface and nitrate ions was responsible for nitrate removal, and the main product of this reaction was ammonium, which was subsequently completely removed by the synthesized nanocomposite. In addition, a stable deviation quantum particle swarm optimization algorithm (SD-QPSO) and a least square error method were employed to train the ANFIS parameters. To demonstrate model performance, a quadratic polynomial function was proposed to display the performance of the SD-QPSO algorithm in which the constant parameters were optimized through the SD-QPSO algorithm. Sensitivity analysis was conducted on the proposed quadratic polynomial function by adding a constant deviation and removing each input using two different strategies. According to the sensitivity analysis, the predicted removal efficiency was most sensitive to changes in pHi, followed by Cs, T, C0, and t. The obtained results underscore the potential of the ANFIS model (R2 = 0.99803, RMSE = 0.9888), and polynomial function (R2 = 0.998256, RMSE = 1.7532) as accurate and efficient alternatives to time-consuming laboratory measurements for assessing nitrate removal efficiency. These models can offer rapid insights and predictions regarding the impact of various factors on the process, saving both time and resources.

Changes in phytochemical properties and water use efficiency of peppermint (Mentha piperita L.) using superabsorbent polymer under drought stress.

Water consumption management and the application of advanced techniques in the agricultural sector can significantly contribute to the efficient utilization of limited water resources. This can be achieved by improving soil texture, increasing water retention, reducing erosion, and enhancing seedling germination through the use of superabsorbent polymers. This study aimed to investigate the effect of Aquasource superabsorbent (AS) on the morphological characteristics, phytochemical properties, antioxidant content, and water use efficiency of peppermint. It was conducted under different irrigation management and using different superabsorbent levels. Therefore, a 3 × 4 factorial design was used to determine the effects of irrigation intervals (2-, 4-, and 6-day) and different levels of AS amount (zero [control], 0.5, 1, and 2 wt%). The effects of these factors on various parameters (morphological characteristics, essential oil percentage, nutrient, protein, proline, carotenoid, antioxidant, and chlorophyll content, leaf area index, relative water content, and water use efficiency [WUE]) were evaluated. The results showed that morphological characteristics and essential oil percentage decreased significantly under drought stress (increasing the irrigation intervals). However, the addition of 0.5 (wt%) AS improved plant growth conditions. Increasing the amount of superabsorbent used to 1 and 2 (wt%) decreased the measured traits, which indicates the creation of unsuitable conditions for plant growth. AS application improved the growth of the root more than the leaf yield of peppermint. A 0.5 (wt%) addition of AS resulted in root length increases of 3, 13, and 15%, respectively, at irrigation intervals of 2, 4, and 6 days, respectively. Additionally, at 0.5 (wt%) AS, root weight increased by 8, 15, and 16% in 2-, 4-, and 6-day irrigation intervals, respectively. Also, the height of the plant increased by 3, 5, and 17% at 2-, 4-, and 6-day irrigation intervals when 0.5 (wt%) of AS was used compared to the control. As well, essential oil percentage increased by 2.14, 2.06, and 1.63% at 2-, 4-, and 6-day irrigation intervals. The nutrient and protein contents decreased as irrigation intervals and AS usage increased, indicating a similar trend. However, compared with the control, the addition of 0.5 (wt%) of AS resulted in some improvements in nutrients and protein. The highest WUE (3.075 kg m-3) was attained in the 4-day irrigation interval and 1 wt% AS addition. This was followed closely by the 2-day irrigation interval with 1 wt% AS addition at 3.025 kg m-3, and the 4-day irrigation interval with 0.5 wt% AS addition, which reached 2.941 kg m-3. Overall, the use of AS in appropriate amounts (0.5 wt%) can reduce water consumption and enhance essential oil yield and WUE in peppermint cultivation in water-scarce arid and semi-arid regions.

Critical review on phytoremediation of polyfluoroalkyl substances from environmental matrices: Need for global concern.

Poly- and perfluoroalkyl substances (PFAS) are a class of emerging organic contaminants that are impervious to standard physicochemical treatments. The widespread use of PFAS poses serious environmental issues. PFAS pollution of soils and water has become a significant issue due to the harmful effects of these chemicals both on the environment and public health. Owing to their complex chemical structures and interaction with soil and water, PFAS are difficult to remove from the environment. Traditional soil remediation procedures have not been successful in reducing or removing them from the environment. Therefore, this review focuses on new phytoremediation techniques for PFAS contamination of soils and water. The bioaccumulation and dispersion of PFAS inside plant compartments has shown great potential for phytoremediation, which is a promising and unique technology that is realistic, cost-effective, and may be employed as a wide scale in situ remediation strategy.