RESUMEN
We report on an Yb:YAG thin-disk multipass amplifier delivering 100 ns long pulses at a central wavelength of 1030 nm with an energy of 330 mJ at a repetition rate of 100 Hz. The beam quality factor at the maximum energy was measured to be M2 < 1.17. The small signal gain is 21.7, and the gain at 330 mJ was measured to be 6.9. The 20-pass amplifier is designed as a concatenation of stable resonator segments in which the beam is alternately Fourier transformed and relay-imaged back to the disk by a 4f-imaging optical scheme stage. The Fourier transform propagation makes the output beam robust against spherical phase front distortions, while the 4f-stage is used to compensate the thermal lens of the thin-disk and to reduce the footprint of the amplifier.
RESUMEN
We demonstrate an injection-seeded thin-disk Yb:YAG laser at 1030 nm, stabilized by the Pound-Drever-Hall (PDH) method. We modified the PDH scheme to obtain an error signal free from Trojan locking points, which allowed robust re-locking of the laser and reliable long-term operation. The single-frequency pulses have 50 mJ energy (limited to avoid laser-induced damage) with a beam quality of M2 < 1.1 and an adjustable length of 55-110 ns. Heterodyne measurements confirmed a spectral linewidth of 3.7 MHz. The short pulse build-up time (850 ns) makes this laser suitable for laser spectroscopy of muonic hydrogen, pursued by the CREMA collaboration.
RESUMEN
We report on a thin-disk multipass amplifier delivering azimuthally polarized, 7.8 ps short, laser pulses at an average power and with pulse energies of up to 1.7 kW and 5.8 mJ, respectively. High polarization purity was achieved by compensating for the arbitrary linear phase shifts that are introduced by tilted optical elements.
RESUMEN
We report on a semiconductor saturable absorber mirror mode-locked thin-disk oscillator based on Yb:YAB delivering pulses with a duration of 462 fs at an average output power of 19.2 W and a pulse energy of 0.38 µJ.
RESUMEN
We present an ultrafast laser with a near-diffraction-limited beam quality delivering more than 1.4 kW of average power in the visible spectral range. The laser is based on second harmonic generation in a lithium triborate crystal of a Yb:YAG thin-disk multipass amplifier emitting more than 2 kW of average power in the infrared.
RESUMEN
We report on the generation of kW-class, continuous-wave, radially polarized laser radiation in an Yb:LuAG thin-disk laser (TDL). Output powers of up to 980 W were achieved with optical efficiency of 50.5% with respect to the incident pump power of the TDL. The degree of radial polarization was measured to be 95.5% at maximum output power. This was achieved by the integration of a new generation of broadband, large-area grating-waveguide mirror with unprecedented high polarization discrimination as the end-mirror in the TDL resonator.
RESUMEN
Wavefront distortions caused by the convection of heated ambient air in front of the laser crystal induce severe pump-power-dependent misalignment in thin-disk laser (TDL) resonators. This effect is particularly pronounced in fundamental mode operation and limits the output power when no realignment of the resonator is possible during operation. In this Letter, we present a new approach to passively compensate for this misalignment instability by exploiting the spectral dispersion of a highly efficient grating-waveguide mirror used as a cavity end-mirror in a Littrow configuration. By this, it was possible to almost triple the output power of a fundamental mode Yb:LuAG TDL pumped at 969 nm.
RESUMEN
We report on the generation of continuous-wave, intra-cavity frequency-doubled, multi-mode laser radiation in an Yb:LuAG thin-disk laser. Output powers of up to 1 kW at a wavelength of 515 nm were achieved at an unprecedented optical efficiency of 51.6% with respect to the pumping power of the thin-disk laser. The wavelength stabilization and spectral narrowing as well as the polarization selection, which is necessary for a stable and efficient second-harmonic generation, was achieved by the integration of a diffraction grating into the dielectric end mirror of the cavity, which exhibits a diffraction efficiency of 99.8%. At a frequency-doubled output power of 820 W the peak-to-valley power fluctuations measured during 100 minutes of laser operation amounted to only 8.2 W (1.0%). The beam parameter product of the frequency-doubled output was 3.4 mm·mrad (M2 ≈ 20), which is suitable for standard beam delivery using fibers with a core diameter of 100 µm and a NA of 0.2.
RESUMEN
We report on the first demonstration, to the best of our knowledge, of a Ti:sapphire thin-disk laser oscillator, and discuss the thermal behavior and the thermally induced lens for different sizes of the pump spot. In multimode cw operation a maximum output power of 7 W was achieved with an optical efficiency of 11%. The emission spectrum exhibits a spectral width of about 10 nm FWHM centered at a wavelength of 790 nm.
RESUMEN
An output power of 2.5 W at a wavelength of 665 nm was obtained from a quantum-well (QW) and multipass-pumped AlGaInP-based vertical-external-cavity surface-emitting laser operated at a heat sink temperature of 10°C. Intracavity frequency doubling resulted in an output power of 820 mW at a wavelength of 333 nm. To the best of our knowledge, these are the highest continuous wave output powers from this type of laser both at the fundamental wavelength and in frequency-doubled operation. In fundamental wavelength operation, further power scaling by increasing the pump-spot size increased the output power to 3.3 W. However, at this power level, the laser was highly unstable. When the laser was operated at 50% pump duty cycle, a reproducible and stable peak output power of 3.6 W was obtained. These results demonstrate the potential of optical QW pumping combined with multipass pumping for the operation of AlGaInP-based semiconductor disk lasers.
RESUMEN
We report on a thin-disk multipass amplifier delivering radially polarized laser pulses with an average power of 635 W and 2.1 mJ of pulse energy. To the best of our knowledge, this is the highest average output power and pulse energy reported so far for radially polarized ultrafast lasers. The amplifier is seeded by a TruMicro5050 with 115 W of average output power, 6.5 ps pulse duration, and a repetition rate of 300 kHz. A segmented half-waveplate was used for converting the linearly polarized beam into radial polarization in front of the amplifier. We present a scheme for direct amplification of such doughnut-shaped radially-polarized beams, the results obtained, and a solution to compensate for the depolarizing phase shift introduced by the tilted mirrors in the amplifier.
RESUMEN
Avalanche photodiodes are commonly used as detectors for low energy x-rays. In this work, we report on a fitting technique used to account for different detector responses resulting from photoabsorption in the various avalanche photodiode layers. The use of this technique results in an improvement of the energy resolution at 8.2 keV by up to a factor of 2 and corrects the timing information by up to 25 ns to account for space dependent electron drift time. In addition, this waveform analysis is used for particle identification, e.g., to distinguish between x-rays and MeV electrons in our experiment.
RESUMEN
We demonstrate a three-stage diode-pumped Yb:YAG single-crystal-fiber amplifier to generate femtosecond pulses at high average powers with linear or cylindrical (i.e., radial or azimuthal) polarization. At a repetition rate of 20 MHz, 750-fs pulses were obtained at an average power of 85 W in cylindrical polarization and at 100 W in linear polarization. The report includes investigations on the use of Yb:YAG single-crystal fibers with different length/doping ratio and the zero-phonon pumping at a wavelength of 969 nm in order to optimize the performance.
RESUMEN
We present Ytterbium-doped CaF2 as a laser active material with good prospects for high-power operation in thin-disk laser configuration owing to its favorable thermal properties. Thanks to its broad emission bandwidth the material is also suitable for the generation of ultra-short pulses. The properties of the crystal as well as the challenges related to the coating, polishing, mounting and handling processes which are essential to achieve high power laser oscillation in thin-disk configuration are discussed. A wavelength tunability of 92 nm is demonstrated, which confirms the potential of Yb:CaF2 for the generation of ultra-short pulses. An output power of 250 W with an optical efficiency of η opt = 47% was measured in CW multimode thin-disk laser operation with a pump spot diameter of 3.6 mm. Using a smaller pump spot diameter of 1 mm the fundamental mode output power was 13 W with an optical efficiency of η opt = 34%.
RESUMEN
We present experimental investigations of grating mirrors with high diffraction efficiencies exceeding 99.7% in the -1st order for TE polarization at a wavelength of 1060 nm, and exceeding a diffraction efficiency of 99% in the wavelength range from 1025 nm to at least 1070 nm. The total efficiency of a four-pass compressor for chirped pulse amplification was >96%. The design, fabrication, and characterization of the fully dielectric grating mirrors are presented.
Asunto(s)
Rayos Láser , Fenómenos ÓpticosRESUMEN
We report on a thin-disk multipass amplifier for ultrashort laser pulses delivering an average output power of 1105 W. The amplifier was seeded by a Trumpf TruMicro5050 laser with a power of 80 W at a wavelength of 1030 nm, pulse duration of 6.5 ps, and repetition rate of 800 kHz. The energy of the amplified pulses is 1.38 mJ with a duration of 7.3 ps. The amplifier exhibits an optical efficiency of 44% and a slope efficiency of 46%. The beam quality was measured to be better than M²=1.25.
RESUMEN
Pumping Yb:YAG or Yb:LuAG into the zero-phonon line at 969 nm instead of using the common pump wavelength of 940 nm reduces the heat generation by 32%. In addition to the 3% increase of the Stokes efficiency, this significantly reduces the diffraction losses caused by the thermally induced phase distortions leading to a remarkable increase of the overall efficiency especially of fundamental-mode thin-disk lasers. Using this pumping scheme in an Yb:LuAG thin-disk laser, we achieved 742 W of nearly diffraction limited (M2≈1.5) output power at an unprecedented high optical efficiency of 58.5%. For multimode operation (M2≈15) the maximum optical efficiency of an Yb:YAG thin-disk laser was increased to 72%.
RESUMEN
The extension of the Jones matrix formalism to higher-order transverse modes using N x N matrices presented in a previous paper [8] is applied to laser resonators. The resonator discussed in detail has a TEM(01)* Hermite-Gaussian mode, an axially symmetric polarizer combined with an axially symmetric phase shifter as a rear mirror and a folding mirror with conventional polarization dependent reflectivity and phase shift. The analysis reveals some useful regimes, where the output polarization is close to radial or azimuthal and the sensitivity to variations in the phase shift of the folding mirror is minimized.
Asunto(s)
Rayos Láser , Óptica y Fotónica , Algoritmos , Diseño de Equipo , Luz , Oscilometría , Física/métodosRESUMEN
We report a beam-shaping technique whereby the output power from a high-power laser-diode stack is efficiently coupled, reconfigured, and transmitted to a thin-disk laser by means of a compact optical fiber bundle. By using this technique, the power density is increased by a factor of 2 when compared to direct coupling with a octagonal fused silica rod while the numerical aperture is kept constant. Transmission efficiency of 80% was measured for the beam shaper without antireflection coating. The top-hat distribution is numerically calculated at the thin-disk laser crystal.
RESUMEN
A single-mode evanescently coupled multicore fiber consisting of 19 hexagonally arranged cores is investigated. Theoretical and experimental results are presented and compared to an equivalent hypothetical step-index fiber. A fundamental mode with an effective area of 465 microm(2) and a beam propagation factor M(2) of 1.02 was measured, showing the high potential of the developed fiber.