RESUMEN
The spectral composition of some light-emitting diodes (LEDs) reportedly results in higher crop yield, prevents wilting, and reduces thermal damage to plants. The use of LEDs for postharvest storage and shelf-life extension has been limited, but the potential of this technology will allow for greater applications in horticulture and the food industry. In this experiment, 'Winterbor' kale (Brassica oleracea) and 'Melody' spinach (Spinacia oleracea) plants were measured for the light compensation point and stomatal response under 14 different wavelengths of light ranging from 405 to 661 nm. Data collected from these measurements were used to select two different wavelengths of LEDs and determine the proper irradiance levels for an LED irradiance storage test on spinach and kale. Treatments comprising blue, red, and amber lights were effective at increasing the stomatal opening, while the green light resulted in reduced stomatal opening. For spinach, the light response curve showed that light compensation points at 500 nm and 560 nm were 65.3 and 64.7 µmol m-2 s-1, respectively. For kale, the light compensation points at 500 nm and 560 nm were 50.8 and 44.1 µmol m-2 s-1, respectively. For the storage test experiment at room temperature, kale and spinach were stored under four different treatments: dark treatment (control), standard white fluorescent light, 500 nm, and 560 nm LED wavelengths. For spinach, the moisture content was 70.1% at 560 nm and 53.7% for dark, moisture losses of 41.5% under the 560-nm treatment and 52.0% for the dark treatment. The fresh basis moisture content was 74.6% at 560 nm and 59.3% in the dark. Moisture loss under the 560 nm treatment was 39.6% while the dark treatment had a 54.0% moisture loss. A visual assessment scale was monitored, 560 nm resulted in the top visual quality for kale compared to the other treatments with the lowest visual quality under the dark treatment at day 4. For spinach, the visual quality for 560 nm treatment was statistically the standard white fluorescent light and 500 nm, with poor-quality product occurring by day 4 and the lowest-quality product occurring at day 5. The LED treatments improved the shelf life of spinach and kale, likely as a result of stomatal aperture closure, photosynthetic rate near the light compensation point and stability of the atmospheric moisture content. This study provides valuable information on the extension of the shelf life of leafy greens during storage. Reducing fresh produce waste in grocery stores will increase revenue, thereby benefiting the Canadian economy while providing social and environmental benefits that entail increased food security and reduced food waste.
Asunto(s)
Brassica , Luz , Estomas de Plantas , Spinacia oleracea , Spinacia oleracea/efectos de la radiación , Spinacia oleracea/fisiología , Spinacia oleracea/metabolismo , Brassica/efectos de la radiación , Brassica/fisiología , Estomas de Plantas/efectos de la radiación , Estomas de Plantas/fisiología , Almacenamiento de AlimentosRESUMEN
The visible light spectrum (400-700 nm) powers plant photosynthesis and innumerable other biological processes. Photosynthesis curves plotted by pioneering photobiologists show that amber light (590-620 nm) induces the highest photosynthetic rates in this spectrum. Yet, both red and blue light are viewed superior in their influence over plant growth. Here we report two approaches for quantifying how light wavelength photosynthesis and plant growth using light emitting diodes (LEDs). Resolved quantum yield spectra of tomato and lettuce plants resemble those acquired earlier, showing high quantum utilization efficiencies in the 420-430 nm and 590-620 nm regions. Tomato plants grown under blue (445 nm), amber (595 nm), red (635 nm), and combined red-blue-amber light for 14 days show that amber light yields higher fresh and dry mass, by at least 20%. Principle component analysis shows that amber light has a more pronounced and direct effect on fresh mass, whereas red light has a major effect on dry mass. These data clarify amber light's primary role in photosynthesis and suggest that bandwidth determines plant growth and productivity under sole amber lighting. Findings set precedence for future work aimed at maximizing plant productivity, with widespread implications for controlled environment agriculture.
Asunto(s)
Luz , Fotosíntesis , Solanum lycopersicum , Fotosíntesis/efectos de la radiación , Solanum lycopersicum/crecimiento & desarrollo , Solanum lycopersicum/efectos de la radiación , Solanum lycopersicum/metabolismo , Lactuca/crecimiento & desarrollo , Lactuca/efectos de la radiación , Lactuca/metabolismoRESUMEN
Full-spectrum light-emitting diodes (LEDs) mainly comprising 460-nm + 595-nm light are becoming a mainstay in the horticulture industry, and recent studies indicate that plant productivity under white LEDs is higher than combined blue and red LED lighting. Different light properties (wavelength and bandwidth) in full-spectrum light, particularly for the blue and amber light regions, have only partly been explored. This research aimed to characterize the effects of amber + blue light wavelengths and bandwidths on tomato (Solanum lycopersicum cv. Beefsteak) growth, morphology, and production efficiency. Tomato seedlings were subjected to four different light treatments for 60 days: narrow amber light (595 nm), narrow blue + narrow amber light (430 nm + 595 nm) with a 1:10 ratio, white LED (455 nm + 595 nm), and a high-pressure sodium (HPS) lamp (control). The highest mean fresh mass yield occurred with the narrow blue + narrow amber light (479 g), followed by white LED at 20% less, HPS at 34% less, and narrow amber at 40% less. Dry mass and plant height were similar among light treatments. Supplementing narrow amber light with 430-nm blue light led to a 20% increase in chlorophyll content. Findings indicate that narrow amber light is more efficient in biomass accumulation than broad amber light and that precise selection of different blue and amber wavelengths can greatly impact the growth and development of tomato seedlings. This energy-efficient narrow-wavelength combination shows improvement over white LED lighting for maximizing tomato growth.
RESUMEN
Efficient determination of antioxidant activity in medicinal plants may provide added value to extracts. The effects of postharvest pre-freezing and drying [microwave-assisted hot air (MAHD) and freeze drying] on hops and cannabis were evaluated to determine the relationship between antioxidant activity and secondary metabolites. The 2,2-diphenyl-1-picrylhydrazine (DPPH) reduction and ferric reducing ability of power (FRAP) assays were assessed for suitability in estimating the antioxidant activity of extracted hops and cannabis inflorescences and correlation with cannabinoid and terpene content. Antioxidant activity in extracts obtained from fresh, undried samples amounted to 3.6 Trolox equivalent antioxidant activity (TEAC) (M) dry matter-1 and 2.32 FRAP (M) dry matter-1 for hops, in addition to 2.29 TEAC (M) dry matter-1 and 0.25 FRAP (M) dry matter-1 for cannabis. Pre-freezing significantly increased antioxidant values by 13% (DPPH) and 29.9% (FRAP) for hops, and by 7.7% (DPPH) and 19.4% (FRAP) for cannabis. ANOVA analyses showed a significant (p < 0.05) increase in total THC (24.2) and THCA (27.2) concentrations (g 100 g dry matter-1) in pre-frozen, undried samples compared to fresh, undried samples. Freeze-drying and MAHD significantly (p < 0.05) reduced antioxidant activity in hops by 79% and 80.2% [DPPH], respectively and 70.1% and 70.4% [FRAP], respectively, when compared to antioxidant activity in extracts obtained from pre-frozen, undried hops. DPPH assay showed that both freeze-drying and MAHD significantly (p < 0.05) reduced the antioxidant activity of cannabis by 60.5% compared to the pre-frozen samples although, there was no significant (p < 0.05) reduction in the antioxidant activity using the FRAP method. Greater THC content was measured in MAHD-samples when compared to fresh, undried (64.7%) and pre-frozen, undried (57%), likely because of decarboxylation. Both drying systems showed a significant loss in total terpene concentration, yet freeze-drying has a higher metabolite retention compared to MAHD. These results may prove useful for future experiments investigating antioxidant activity and added value to cannabis and hops.
RESUMEN
Efficient cannabis biomass extraction can increase yield while reducing costs and minimizing waste. Cold ethanol extraction was evaluated to maximize yield and concentrations of cannabinoids and terpenes at different temperatures. Central composite rotatable design was used to optimize two independent factors: sample-to-solvent ratio (1:2.9 to 1:17.1) and extraction time (5.7 min-34.1 min). With response surface methodology, predicted optimal conditions at different extraction temperatures were a cannabis-to-ethanol ratio of 1:15 and a 10 min extraction time. With these conditions, yields (g 100 g dry matter-1) were 18.2, 19.7, and 18.5 for -20 °C, -40 °C and room temperature, respectively. Compared to the reference ground sample, tetrahydrocannabinolic acid changed from 17.9 (g 100 g dry matter-1) to 15, 17.5, and 18.3 with an extraction efficiency of 83.6%, 97.7%, 102.1% for -20 °C, -40 °C, and room temperature, respectively. Terpene content decreased by 54.1% and 32.2% for extraction at -20 °C and room temperature, respectively, compared to extraction at -40 °C. Principal component analysis showed that principal component 1 and principal component 2 account for 88% and 7.31% of total variance, respectively, although no significant differences in cold ethanol extraction at different temperatures were observed.
Asunto(s)
Cannabinoides , Cannabis , Alucinógenos , Terpenos , Etanol , Agonistas de Receptores de CannabinoidesRESUMEN
Limited studies have explored different extraction techniques that improve cannabis extraction with scale-up potential. Ultrasound-assisted and microwave-assisted extraction were evaluated to maximize the yield and concentration of cannabinoids and terpenes. A central composite rotatable design was used to optimize independent factors (sample-to-solvent ratio, extraction time, extraction temperature, and duty cycle). The optimal conditions for ultrasound- and microwave-assisted extraction were the sample-to-solvent ratios of 1:15 and 1:14.4, respectively, for 30 min at 60 °C. Ultrasound-assisted extraction yielded 14.4% and 14.2% more oil and terpenes, respectively, compared with microwave-assisted extracts. Ultrasound-assisted extraction increased cannabinoid concentration from 13.2−39.2%. Considering reference ground samples, tetrahydrocannabinolic acid increased from 17.9 (g 100 g dry matter−1) to 28.5 and 20 with extraction efficiencies of 159.2% and 111.4% for ultrasound-assisted and microwave-assisted extraction, respectively. Principal component analyses indicate that the first two principal components accounted for 96.6% of the total variance (PC1 = 93.2% and PC2 = 3.4%) for ultrasound-assisted extraction and 92.4% of the total variance (PC1 = 85.4% and PC2 = 7%) for microwave-assisted extraction. Sample-to-solvent ratios significantly (p < 0.05) influenced the secondary metabolite profiles and yields for ultrasound-assisted extracts, but not microwave-assisted extracts.
Asunto(s)
Cannabinoides , Cannabis , Alucinógenos , Terpenos , Extractos Vegetales , Solventes , Agonistas de Receptores de CannabinoidesRESUMEN
Pisum sativum is a leguminous crop suitable for cultivation worldwide. It is used as a forage or dried seed supplement in animal feed and, more recently, as a potential non-traditional oilseed. This study aimed to develop a low-cost, rapid, and non-destructive method for analyzing pea lipids with no chemical modifications that would prove superior to existing destructive solvent extraction methods. Different pea accession seed samples, prepared as either small portions (0.5 mm2) of endosperm or ground pea seed powder for comparison, were subjected to HR-MAS NMR analyses and whole seed samples underwent NIR analyses. The total lipid content ranged between 0.57-3.45% and 1.3-2.6% with NMR and NIR, respectively. Compared to traditional extraction with butanol, hexane-isopropanol, and petroleum ether, correlation coefficients were 0.77 (R2 = 0.60), 0.56 (R2 = 0.47), and 0.78 (R2 = 0.62), respectively. Correlation coefficients for NMR compared to traditional extraction increased to 0.97 (R2 = 0.99) with appropriate correction factors. PLS regression analyses confirmed the application of this technology for rapid lipid content determination, with trends fitting models often close to an R2 of 0.95. A better robust NIR quantification model can be developed by increasing the number of samples with more diversity.