RESUMEN
This paper presents a new methodology for addressing imbalanced class data for failure prediction in Water Distribution Networks (WDNs). The proposed methodology relies on existing approaches including under-sampling, over-sampling, and class weighting as primary strategies. These techniques aim to treat the imbalanced datasets by adjusting the representation of minority and majority classes. Under-sampling reduces data in the majority class, over-sampling adds data to the minority class, and class weighting assigns unequal weights based on class counts to balance the influence of each class during machine learning (ML) model training. In this paper, the mentioned approaches were used at levels other than "balance point" to construct pipe failure prediction models for a WDN with highly imbalanced data. F1-score, and AUC-ROC, were selected to evaluate model performance. Results revealed that under-sampling above the balance point yields the highest F1-score, while over-sampling below the balance point achieves optimal results. Employing class weights during training and prediction emphasises the efficacy of lower weights than the balance. Combining under-sampling and over-sampling to the same ratio for both majority and minority classes showed limited improvement. However, a more effective predictive model emerged when over-sampling the minority class and under-sampling the majority class to different ratios, followed by applying class weights to balance data.
RESUMEN
The unique properties of metamaterials are determined by the configuration and spatial arrangement of artificially designed unit structures. However, the configuration and mechanical properties of conventional metamaterials are challenging to reverse and adjust. Based on curved beams, two types of novel three-dimensional (3D) multi-stable metamaterials with reconfigurable deformation and tunable mechanical properties are designed and fabricated using a four-dimensional (4D) printing method. The effects of temperature and curved-beam thickness on the force-displacement curves and multi-stable snapping sequence of the 3D multi-stable metamaterials are investigated by finite-element analysis (FEA) and experiments. In addition, based on the designed four-branch multi-stable metamaterials, three- and six-branched multi-stable structures are designed by changing the number of curved-beam branches. It is shown that, owing to shape memory effects, the 3D multi-stable metamaterials can realize mechanical programmability, and the multi-stable deformation sequence can be precisely regulated by varying the temperature and curved-beam thickness. These 4D-printed multi-stable metamaterials provide valuable contributions to the design of programmable multi-stable metamaterials and their applications in soft robots and intelligent structures. This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'.
RESUMEN
While existing studies on sewer networks have explored topics such as surface water inflow, limited research has delved into groundwater infiltration (GWI). This study aims to fill this void by providing a comprehensive overview of quantitative analyses of GWI in sewer networks plus current status, limitations and future perspectives, considering the most relevant peer-reviewed research, including 83 studies. We propose dividing the existing research into two main groups: (1) phreatic zone, and (2) vadose zone. Most research has focused on the latter, mainly considering Rainfall-Derived Inflow and Infiltration (RDII), including surface water inflow and GWI. The ratio of each is not frequently separated; otherwise, there may be some assumptions, e.g. in dry weather and assuming zero surface water inflow. We also divided the employed approaches in different categories from physically-based numerical models, to simpler ones, e.g. water budget analysis. In fact, a combination of approaches may be applied to find the intricate characteristics of 'urban groundwater' or 'urban karst.' The findings revealed a heightened vulnerability of sewer networks to GWI, due to climate change (CC) and its associated repercussions, e.g. sea level rise (SLR), making the coastal cities the most vulnerable regions. In future research, the criticality of pre-emptive measures and monitoring of networks, especially near the coastline, is emphasised to ensure the resilience and adaptability of sewer networks in the context of GWI amid the potential impacts of CC. However, current monitoring practices lack widespread evidence for spatiotemporal analysis of GWI quantity.
Asunto(s)
Ciudades , Agua Subterránea , Aguas del Alcantarillado , Cambio Climático , Lluvia , Modelos TeóricosRESUMEN
The bioaccumulation of lead in soil poses a significant human health risk. The solidification/stabilization (S/S) technique, employing binders like Portland cement or lime, is a common method for remediating lead-contaminated soil. However, cement production has adverse environmental impacts, prompting the exploration of eco-friendly alternatives like alkali-activated materials (AAMs). This study assesses AAM efficacy in the S/S of lead-contaminated soil. The effects of several factors, including varying amounts of volcanic ash (VA), lead concentration, curing temperatures, and curing times are investigated. Unconfined compressive strength (UCS), toxicity characteristic leaching procedure test (TCLP), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and field emission scanning electron microscope-energy-dispersive spectroscopy-mapping analyses (FESEM/EDS/mapping) analyses are used to study the specimens. The findings indicated a substantial increase in the UCS of lead-contaminated soil treated with 15% VA (under oven curing (OC) conditions), and 10% VA (under ambient curing (AC) conditions) exhibited remarkable increases of up to 600% and 458%, respectively. Moreover, the leaching of Pb2+ ions from samples contaminated with 10,000 mg/kg (under OC conditions) and 2500 mg/kg (under AC conditions) experienced significant reductions of 87% (from 135.14 to 13.36 ppm) and 91% (from 26.32 to 2.21 ppm), respectively. The S/S process in these samples operated through three primary mechanisms of chemical bonding, physical encapsulation, and the formation of insoluble silicate. The formation of N-A-S-H and hydroxy sodalite structures played a vital role in facilitating these mechanisms. Therefore, alkali-activated VA demonstrated excellent performance in the remediation of lead-contaminated soil.
Asunto(s)
Álcalis , Plomo , Contaminantes del Suelo , Suelo , Plomo/química , Contaminantes del Suelo/química , Suelo/química , Álcalis/química , Erupciones Volcánicas , Difracción de Rayos X , Restauración y Remediación Ambiental/métodosRESUMEN
Calcium carbide residue (CCR), a by-product of the acetylene industry, is generated at a rate of 136 million tonnes per year, posing significant environmental risks. This review examines the potential utilisation of CCR in soil stabilisation, focusing on its stabilisation mechanism, performance in improving mechanical properties, environmental safety, and sustainability. The aim is to identify future research directions for CCR-based stabilisation to promote its broader application, and to provide references for managing similar Ca-rich wastes. CCR-based materials demonstrate promising benefits in enhancing various soil properties, such as uniaxial strength, swelling properties, triaxial shear behaviour, compressibility, and dynamic responses, while also reducing the mobility of contaminants. Compared to conventional stabilisers, CCR-based materials exhibit comparable performance in soil improvement, environmental impact and safety, and economic feasibility. However, further research is required to delve deeper into stabilisation mechanisms, mechanical properties, and stability of contaminants for the soil treated with CCR-based materials under diverse conditions.
Asunto(s)
Acetileno/análogos & derivados , Residuos Industriales , Suelo , Suelo/química , CalcioRESUMEN
With limited healthcare resources, it is important to provide the right level and form of care. The aim of this study was to determine whether selected single-jaw orthognathic surgery in outpatient care (OPC) generates lower healthcare costs than in inpatient care (IPC). The costs of surgically assisted rapid maxillary expansion (SARME), Le Fort I osteotomy (LFI), and bilateral sagittal split osteotomy (BSSO) were calculated for 165 patients, 107 treated in OPC and 58 in IPC. Additionally, costs for revisits, emergency visits, emergency phone calls, re-operations, and plate removal during the first 12 months postoperatively were recorded. The total mean costs of the different operations including revisits, emergency visits, and phone calls were 34.2-48.8% lower in OPC than in IPC at 12 months postoperatively. Operation costs were lower for LFI in OPC (P = 0.009) and for SARME in IPC (P = 0.007). Anaesthesia costs were lower for LFI (P < 0.001) and BSSO (P < 0.001) in OPC, and there were fewer revisits (P = 0.001) and lower costs (P = 0.002) after LFI in OPC compared to IPC. This study showed that selected single-jaw orthognathic surgeries in outpatient care are associated with lower healthcare costs compared to inpatient care.
Asunto(s)
Atención Ambulatoria , Hospitalización , Procedimientos Quirúrgicos Ortognáticos , Humanos , Femenino , Masculino , Procedimientos Quirúrgicos Ortognáticos/economía , Atención Ambulatoria/economía , Adulto , Hospitalización/economía , Costos de la Atención en Salud , Osteotomía Le Fort/economía , Costos y Análisis de Costo , Adolescente , Técnica de Expansión Palatina/economía , Estudios Retrospectivos , Osteotomía Sagital de Rama Mandibular/economíaRESUMEN
In this study, we employed a straightforward flame synthesis process to produce carbon soot containing carbon nano onions (CNOs) using easily accessible ghee oil as a precursor. The ghee oil, with a molecular composition rich in more than 50 carbon atoms, served as an effective source for generating CNOs. The synthesized CNO particles underwent comprehensive characterization through high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses, providing a detailed account of their physicochemical properties. In addition, we explored the direct deposition of CNOs on carbon fiber (CF) surfaces for 5 and 10 min via a soot deposition process. The resulting freeze-fracture images obtained from scanning electron microscope (SEM) offered insights into the morphology of the CNO-deposited CF. Our study aims to shed light on the potential applications of CNOs, focusing on their characterization and the possible benefits they may offer in diverse fields, including but not limited to enhancing interfacial bonding in thermoplastic composites.
RESUMEN
Abstract Maydis leaf blight, caused by Bipolaris maydis, is an important disease of maize crop in Khyber Pakhtunkhwa (KP) Pakistan. Fifteen isolates of the pathogen, collected across KP, were studied for variability based on phenotypic and molecular markers. Significant variability among the isolates was observed when assessed using phenotypic traits such as radial growth, spore concentration, fungicide sensitivity and virulence. The isolates were classified into six culture groups based on colour, texture and margins of the colony. Conidial morphology was also variable. These were either straight or slightly curved and light to dark brown in colour. Fungicide test showed significant variation in the degree of sensitivity against Carbendazim. Isolate Bm8 exhibited maximum radial growth on carbendazim spiked plates. Conversely, isolate Bm15 showed the lowest radial growth. Variations in virulence pattern of the isolates were evident when a susceptible maize variety Azam was inoculated with spores of B. maydis. Genetic variability amongst the isolates was also estimated by RAPD as well as sequencing of ITS region. The RAPD dendrogram grouped all the isolates into two major clusters. Average genetic distance ranged from 0.6% to 100%, indicating a diverse genetic gap among the isolates. Maximum genetic distance was found between isolates Bm9 and Bm10 as well as Bm2 and Bm8. Conversely, isolates Bm13 and Bm15 were at minimum genetic distance. Phylogenetic dendrogram based on sequencing of ITS region grouped all the isolates into a single major cluster. The clusters in both the dendrogram neither correlate to the geographical distribution nor to the morphological characteristics.
Resumo A ferrugem das folhas de maydis, causada por Bipolaris maydis, é uma doença importante da cultura do milho em Khyber Pakhtunkhwa (KP), Paquistão. Quinze isolados do patógeno, coletados em KP, foram estudados quanto à variabilidade com base em marcadores fenotípicos e moleculares. Variabilidade significativa entre os isolados foi observada quando avaliada por meio de características fenotípicas, como crescimento radial, concentração de esporos, sensibilidade a fungicida e virulência. Os isolados foram classificados em seis grupos de cultura com base na cor, textura e margens da colônia. A morfologia dos conídios também foi variável. Estes eram retos ou ligeiramente curvos e de cor marrom-claro a escuro. O teste de fungicida mostrou variação significativa no grau de sensibilidade ao carbendazim. O isolado Bm8 exibiu crescimento radial máximo em placas com adição de carbendazim. Por outro lado, o isolado Bm15 apresentou o menor crescimento radial. As variações no padrão de virulência dos isolados foram evidentes quando uma variedade de milho suscetível Azam foi inoculada com esporos de B. maydis. A variabilidade genética entre os isolados também foi estimada por RAPD, bem como sequenciamento da região ITS. O dendrograma RAPD agrupou todos os isolados em dois grupos principais. A distância genética média variou de 0,6% a 100%, indicando uma lacuna genética diversa entre os isolados. A distância genética máxima foi encontrada entre os isolados Bm9 e Bm10 e também entre Bm2 e Bm8. Por outro lado, os isolados Bm13 e Bm15 estavam a uma distância genética mínima. O dendrograma filogenético baseado no sequenciamento da região ITS agrupou todos os isolados em um único aglomerado principal. Os agrupamentos em ambos os dendrogramas não se correlacionam com a distribuição geográfica nem com as características morfológicas.
RESUMEN
Cardiovascular diseases during pregnancy are rare but account for complications that pose risks to the mother as well as the child. In patients with fixed cardiac output due to stenotic valvular lesion(s), the physiological changes during pregnancy carry high risk of morbidity and mortality. Case Presentation: Our patient was diagnosed with severe mitral and aortic stenosis at her first antenatal visit at 24 weeks of gestation. She was also diagnosed with intrauterine growth restriction and was therefore planned to be operated on at a gestational age of 34 weeks. After careful selection of monitoring and anesthetic regime, the patient was managed without any intraoperative or postoperative complications. Clinical Discussion: This case reports how the anesthetists, obstetricians, and cardiac surgeons devised a well-designed plan to operate on a patient with a relatively rare disease manifestation. Our patient had coexisting severe stenotic lesions of both mitral and aortic valves and posed a clinical dilemma regarding the choice of anesthesia and perioperative management. Regardless of the anesthetic technique, goals for a patient with the combined valvular disease include maintenance of adequate preload, systemic vascular resistance, cardiac contractility, sinus rhythm and avoidance of tachycardia, bradycardia, aortocaval compression, and anesthetic or surgery-induced hemodynamic changes. Conclusion: The course of management would give clinicians an idea of how to manage a patient with combined stenotic valvular lesions for cesarean section, ensuring a smooth course and a safe postoperative period.
RESUMEN
The paper critically analyzed different interfacial enhancing methods used in thermoplastic composites. Although the absence of cross-linked polymer chains and chemical bonds on solidification enables the thermoplastics to be remelted, it creates weak interfacial adhesion between fibre reinforcements and the thermoplastic matrix. The weak fibre-matrix interface bonding reduces the efficiency with which the applied load can be transferred between these composite constituents, causing the composite to fail prematurely. Their need for high-temperature processing, poor compatibility with other polymer matrices, and relatively high viscosity render thermoplastics challenging when used to manufacture composite laminates. Therefore, various methods, including nanoparticles, changing the polarity of the fibre surface by plasma etching, chemical treatment with ozone, or an oxidative attack at the fibre surface, have been applied to improve the fibre/matrix bonding in thermoplastic composites. The fabrication steps followed in these techniques, their progress in research, and the associated toughening mechanisms are comprehensively discussed in this paper. The effect of different fibre-matrix interfacial enhancement methods on the mechanical properties of thermoplastic composites is also deliberated.
RESUMEN
BACKGROUND: Ensuring health equity, especially for vulnerable populations in less developed settings with poor health system is essential for the current and future global health threats. This study examined geographical variations of COVID-19 mortality and its association with population health characteristics, health care capacity in responding pandemic, and socio-economic characteristics across 514 districts in Indonesia. METHODS: This nationwide ecological study included aggregated data of COVID-19 cases and deaths from all 514 districts in Indonesia, recorded in the National COVID-19 Task Force database, during the first two years of the epidemic, from 1 March 2020 to 27 February 2022. The dependent variable was district-level COVID-19 mortality rate per 100,000 populations. The independent variables include district-level COVID-19 incidence rate, population health, health care capacity, and socio-demographics data from government official sources. We used multivariable ordinal logistic regression to examine factors associated with higher mortality rate. RESULTS: Of total 5,539,333 reported COVID-19 cases, 148,034 (2.7%) died, and 5,391,299 (97.4%) were recovered. The district-level mortality rate ranged from 0 to 284 deaths per 100,000 populations. The top five districts with the highest mortality rate were Balikpapan (284 deaths per 100,000 populations), Semarang (263), Madiun (254), Magelang (250), and Yogyakarta (247). A higher COVID-19 incidence (coefficient 1.64, 95% CI 1.22 to 1.75), a higher proportion of ≥ 60 years old population (coefficient 0.26, 95% CI 0.06 to 0.46), a higher prevalence of diabetes mellitus (coefficient 0.60, 95% CI 0.37 to 0.84), a lower prevalence of obesity (coefficient -0.32, 95% CI -0.56 to -0.08), a lower number of nurses per population (coefficient -0.27, 95% CI -0.50 to -0.04), a higher number of midwives per population (coefficient 0.32, 95% CI 0.13 to 0.50), and a higher expenditure (coefficient 0.34, 95% CI 0.10 to 0.57) was associated with a higher COVID-19 mortality rate. CONCLUSION: COVID-19 mortality rate in Indonesia was highly heterogeneous and associated with higher COVID-19 incidence, different prevalence of pre-existing comorbidity, healthcare capacity in responding the pandemic, and socio-economic characteristics. This study revealed the need of controlling both COVID-19 and those known comorbidities, health capacity strengthening, and better resource allocation to ensure optimal health outcomes for vulnerable population.
Asunto(s)
COVID-19 , Diabetes Mellitus , Humanos , Persona de Mediana Edad , COVID-19/epidemiología , Indonesia/epidemiología , Diabetes Mellitus/epidemiología , Comorbilidad , PandemiasRESUMEN
Orthognathic surgery is traditionally performed in inpatient care. The question is whether patient safety is maintained when orthognathic surgery is performed in outpatient care. This retrospective cohort study was conducted to investigate patient safety in selected single-jaw orthognathic surgeries performed in outpatient care compared to inpatient care. Postoperative infection, postoperative bleeding, postoperative pain, plate removal, and re-operation, as well as emergency visits/phone calls and postoperative admission during the first 12 months after surgery were recorded. Predictor variables were sex, age, smoking, general disease, antibiotics, operation type, and operation time. Of the 165 patients included, 58 were treated in inpatient care and 107 in outpatient care. No significant difference was found between the groups regarding postoperative bleeding, pain, plate removal, re-operation, or emergency visits/phone calls. Ninety-four percent of outpatients (n = 101) were able to leave the hospital on the day of surgery as planned. There was an increased risk of postoperative infection in the outpatient care group (odds ratio 2.46, P = 0.049). Selected single-jaw orthognathic surgery can be performed in the outpatient setting, with maintained patient safety. The reason for the increased risk of postoperative infection among patients operated in outpatient care should be investigated in further studies.
Asunto(s)
Cirugía Ortognática , Pacientes Ambulatorios , Humanos , Estudios Retrospectivos , Seguridad del Paciente , Complicaciones Posoperatorias/etiología , Dolor Postoperatorio , Procedimientos Quirúrgicos Ambulatorios/efectos adversosRESUMEN
The poultry sector in Pakistan is contributing mainly in bridging gap between demand and supply for protein. Mycoplasma gallisepticum is an emerging bacterium causing serious problems in poultry industry of Pakistan. A cross-sectional study was conducted to evaluate the M. gallisepticum load in poultry populated regions of Pakistan. Total 600 serum and 600 swab samples were collected, 200 from each broiler, layers and breeders poultry in Rawalpindi and Abbottabad districts. Serum samples were analyzed through ELISA for seroprevalence. Swabs were cultured on Freys medium followed by PCR and partial mgc2 gene sequencing. Results of seroprevalence of M. gallisepticum showed that layers (75%, n=150) are more positive as compared to breeders (70%, n=140) and broilers (50%, n=100). Typical colonies of the M. gallisepticum were observed in breeder (26.5%), followed by layer (21%) and broilers (9%). A total of 37.1% (n=42) samples were identified positive through PCR out of total 113 cultured based positive samples. A total of six M. gallisepticum isolates of current study showed 98-99 percent similarity with previously reported isolates on the basis of mgc2 gene partial sequencing. The M. gallisepticum was found highly prevalent in different poultry breads. Results of this study would add into basic data and provide a direction for livestock sector to strengthen a control strategy for mycoplasmosis in poultry farms.
O setor avícola do Paquistão está contribuindo principalmente para preencher a lacuna entre a demanda e a oferta de proteína. Mycoplasma gallisepticum é uma bactéria emergente que causa sérios problemas na indústria avícola do Paquistão. Um estudo transversal foi conduzido para avaliar a carga de M. gallisepticum em regiões de avicultura do Paquistão. Um total de 600 amostras de soro e 600 amostras de esfregaço foi coletado, 200 de cada frango de corte, poedeiras e aves reprodutoras nos distritos de Rawalpindi e Abbottabad. Amostras de soro foram analisadas por ELISA para soroprevalência. As zaragatoas foram cultivadas em meio Frey, seguido de PCR e sequenciação parcial do gene mgc2. Os resultados da soroprevalência de M. gallisepticum mostraram que as poedeiras (75%, n = 150) são mais positivas em comparação com matrizes (70%, n = 140) e frangos de corte (50%, n = 100). Colônias típicas de M. gallisepticum foram observadas em reprodutoras (26,5%), seguidas de poedeiras (21%) e frangos de corte (9%). Um total de 37,1% (n = 42) das amostras foi identificado como positivas por PCR de um total de 113 amostras positivas baseadas em cultura. Um total de seis isolados de M. gallisepticum do estudo atual mostrou 98-99% de similaridade com isolados relatados anteriormente com base no sequenciamento parcial do gene mgc2. O M. gallisepticum foi encontrado com alta prevalência em diferentes pães de aves. Os resultados deste estudo acrescentariam dados básicos e forneceriam orientação para o setor pecuário fortalecer uma estratégia de controle da micoplasmose em granjas avícolas.
Asunto(s)
Animales , Aves de Corral/genética , Aves de Corral/sangre , Ensayo de Inmunoadsorción Enzimática , Mycoplasma/patogenicidad , Reacción en Cadena de la PolimerasaRESUMEN
Staphylococcus aureus is an important foodborne pathogen associated to food intoxication and other multiple infections in human being. Its presence in salted food is a serious issue due to its salt tolerance potential. A study was conducted to analyze the presence of enterotoxins producing drug resistance S. aureus in salted sea fish from Gwadar. Freshly persevered samples (n=50) of salted fish were subjected to analyze the presence of S. aureus using 16S rRNA and Nuc genes primers. The isolates were then evaluated for drug resistance and enterotoxins producing potential using specific primers for MecA (methicillin resistance gene), (SEA) staphylococcal enterotoxin A and (SEB) staphylococcal enterotoxin B genes. Total 13/50 (26%) of the samples were found positive for the presence of S. aureus, preliminary confirmed with biochemical profiling and finally with the help of target genes presence. The isolates were found showing 100% resistant to methicillin, which were molecularly confirmed by the presence of MecA gene present in genome. The isolates 5/13 (38%) were positive for SEA and 3/13 (23%) for SEB genes, whereas 2/13 (15%) were confirmed having both SEA and SEB genes in its genome. It was also confirmed that all the isolates were capable to form biofilm over the glass surfaces. It was concluded that the study confirmed the presence of enterotoxigenic methicillin resistance Staphylococcus aurous (MRSA) in salted fish product, that poses gross food safety concern. Preventive and control measures are necessary to handle this serious food safety concern.
Staphylococcus aureus é um importante patógeno de origem alimentar associado à intoxicação alimentar e outras infecções múltiplas em seres humanos. Sua presença em alimentos salgados é um problema sério devido ao seu potencial de tolerância ao sal. Um estudo foi realizado para analisar a presença de enterotoxinas produtoras de resistência a drogas S. aureus em peixes salgados do mar de Gwadar. Amostras recém-perseveradas (n = 50) de peixes salgados foram submetidas à análise da presença de S. aureus usando os primers dos genes 16S rRNA e Nuc. Os isolados foram então avaliados quanto à resistência a drogas e potencial de produção de enterotoxinas usando primers específicos para os genes MecA (gene de resistência à meticilina), (SEA) enterotoxina A estafilocócica e (SEB) enterotoxina B estafilocócica genes. Um total de 13/50 (26%) das amostras foi considerado positivas para a presença de S. aureus, confirmadas preliminarmente com perfis bioquímicos e finalmente com a ajuda da presença de genes-alvo. Os isolados foram encontrados com 100% de resistência à meticilina, os quais foram confirmados molecularmente pela presença do gene MecA no genoma. Os isolados 5/13 (38%) foram positivos para SEA e 3/13 (23%) para genes SEB, enquanto 2/13 (15%) foram confirmados tendo os genes SEA e SEB em seu genoma. Também foi verificado que todos os isolados foram capazes de formar biofilme sobre as superfícies de vidro. Concluiu-se que o estudo confirmou a presença de Staphylococcus aurous resistente à meticilina enterotoxigênica (MRSA) em produtos de peixe salgado, o que representa uma grande preocupação para a segurança alimentar. Medidas preventivas e de controle são necessárias para lidar com essa grave preocupação com a segurança alimentar.
Asunto(s)
Animales , Enfermedades Transmitidas por los Alimentos/prevención & control , Inocuidad de los Alimentos , Peces/genética , Staphylococcus aureus Resistente a Meticilina/patogenicidadRESUMEN
Abstract The poultry sector in Pakistan is contributing mainly in bridging gap between demand and supply for protein. Mycoplasma gallisepticum is an emerging bacterium causing serious problems in poultry industry of Pakistan. A cross-sectional study was conducted to evaluate the M. gallisepticum load in poultry populated regions of Pakistan. Total 600 serum and 600 swab samples were collected, 200 from each broiler, layers and breeders poultry in Rawalpindi and Abbottabad districts. Serum samples were analyzed through ELISA for seroprevalence. Swabs were cultured on Freys medium followed by PCR and partial mgc2 gene sequencing. Results of seroprevalence of M. gallisepticum showed that layers (75%, n=150) are more positive as compared to breeders (70%, n=140) and broilers (50%, n=100). Typical colonies of the M. gallisepticum were observed in breeder (26.5%), followed by layer (21%) and broilers (9%). A total of 37.1% (n=42) samples were identified positive through PCR out of total 113 cultured based positive samples. A total of six M. gallisepticum isolates of current study showed 98-99 percent similarity with previously reported isolates on the basis of mgc2 gene partial sequencing. The M. gallisepticum was found highly prevalent in different poultry breads. Results of this study would add into basic data and provide a direction for livestock sector to strengthen a control strategy for mycoplasmosis in poultry farms.
Resumo O setor avícola do Paquistão está contribuindo principalmente para preencher a lacuna entre a demanda e a oferta de proteína. Mycoplasma gallisepticum é uma bactéria emergente que causa sérios problemas na indústria avícola do Paquistão. Um estudo transversal foi conduzido para avaliar a carga de M. gallisepticum em regiões de avicultura do Paquistão. Um total de 600 amostras de soro e 600 amostras de esfregaço foi coletado, 200 de cada frango de corte, poedeiras e aves reprodutoras nos distritos de Rawalpindi e Abbottabad. Amostras de soro foram analisadas por ELISA para soroprevalência. As zaragatoas foram cultivadas em meio Frey, seguido de PCR e sequenciação parcial do gene mgc2. Os resultados da soroprevalência de M. gallisepticum mostraram que as poedeiras (75%, n = 150) são mais positivas em comparação com matrizes (70%, n = 140) e frangos de corte (50%, n = 100). Colônias típicas de M. gallisepticum foram observadas em reprodutoras (26,5%), seguidas de poedeiras (21%) e frangos de corte (9%). Um total de 37,1% (n = 42) das amostras foi identificado como positivas por PCR de um total de 113 amostras positivas baseadas em cultura. Um total de seis isolados de M. gallisepticum do estudo atual mostrou 98-99% de similaridade com isolados relatados anteriormente com base no sequenciamento parcial do gene mgc2. O M. gallisepticum foi encontrado com alta prevalência em diferentes pães de aves. Os resultados deste estudo acrescentariam dados básicos e forneceriam orientação para o setor pecuário fortalecer uma estratégia de controle da micoplasmose em granjas avícolas.
RESUMEN
Abstract Staphylococcus aureus is an important foodborne pathogen associated to food intoxication and other multiple infections in human being. Its presence in salted food is a serious issue due to its salt tolerance potential. A study was conducted to analyze the presence of enterotoxins producing drug resistance S. aureus in salted sea fish from Gwadar. Freshly persevered samples (n=50) of salted fish were subjected to analyze the presence of S. aureus using 16S rRNA and Nuc genes primers. The isolates were then evaluated for drug resistance and enterotoxins producing potential using specific primers for MecA (methicillin resistance gene), (SEA) staphylococcal enterotoxin A and (SEB) staphylococcal enterotoxin B genes. Total 13/50 (26%) of the samples were found positive for the presence of S. aureus, preliminary confirmed with biochemical profiling and finally with the help of target genes presence. The isolates were found showing 100% resistant to methicillin, which were molecularly confirmed by the presence of MecA gene present in genome. The isolates 5/13 (38%) were positive for SEA and 3/13 (23%) for SEB genes, whereas 2/13 (15%) were confirmed having both SEA and SEB genes in its genome. It was also confirmed that all the isolates were capable to form biofilm over the glass surfaces. It was concluded that the study confirmed the presence of enterotoxigenic methicillin resistance Staphylococcus aurous (MRSA) in salted fish product, that poses gross food safety concern. Preventive and control measures are necessary to handle this serious food safety concern.
Resumo Staphylococcus aureus é um importante patógeno de origem alimentar associado à intoxicação alimentar e outras infecções múltiplas em seres humanos. Sua presença em alimentos salgados é um problema sério devido ao seu potencial de tolerância ao sal. Um estudo foi realizado para analisar a presença de enterotoxinas produtoras de resistência a drogas S. aureus em peixes salgados do mar de Gwadar. Amostras recém-perseveradas (n = 50) de peixes salgados foram submetidas à análise da presença de S. aureus usando os primers dos genes 16S rRNA e Nuc. Os isolados foram então avaliados quanto à resistência a drogas e potencial de produção de enterotoxinas usando primers específicos para os genes MecA (gene de resistência à meticilina), (SEA) enterotoxina A estafilocócica e (SEB) enterotoxina B estafilocócica genes. Um total de 13/50 (26%) das amostras foi considerado positivas para a presença de S. aureus, confirmadas preliminarmente com perfis bioquímicos e finalmente com a ajuda da presença de genes-alvo. Os isolados foram encontrados com 100% de resistência à meticilina, os quais foram confirmados molecularmente pela presença do gene MecA no genoma. Os isolados 5/13 (38%) foram positivos para SEA e 3/13 (23%) para genes SEB, enquanto 2/13 (15%) foram confirmados tendo os genes SEA e SEB em seu genoma. Também foi verificado que todos os isolados foram capazes de formar biofilme sobre as superfícies de vidro. Concluiu-se que o estudo confirmou a presença de Staphylococcus aurous resistente à meticilina enterotoxigênica (MRSA) em produtos de peixe salgado, o que representa uma grande preocupação para a segurança alimentar. Medidas preventivas e de controle são necessárias para lidar com essa grave preocupação com a segurança alimentar.
RESUMEN
Background and Aim: Transversus abdominis plane (TAP) block and local anesthetic infiltration (LAI) technique are used as part of the multimodal analgesic regimen after abdominal surgery. Postoperative opioid consumption and analgesic efficacy was compared using TAP and LAI techniques in patients undergoing gynecologic surgery in a randomized, controlled clinical trial. Material and Methods: Total of 135 patients scheduled for major gynecological surgeries were allocated into three groups: group T received bilateral TAP block with bupivacaine 0.25%; group I received LAI with 0.25% bupivacaine with epinephrine 5 µ/mL in the peritoneum and abdominal wall, and group C was control group. Anesthesia and postoperative analgesia were standardized. Outcome measures were cumulative and rescue tramadol consumption, numerical rating score (NRS) for pain and side effects in post-anesthesia care unit (PACU) at 4, 8, 12 hours postoperatively. Results: Tramadol consumption, need for rescue analgesia, and NRS for pain between three groups at 4, 8, and 12 hours postoperatively had no statistically significant difference (P < 0.05). In PACU, median tramadol consumption used for rescue analgesia between group T (15 (15-30)) and group C (30 (15-45)) (P = 0.035), and between group T (15 (15-30)) and group I (30 (15-52)) was statistically significant (P = 0.034). In PACU, the percentage of patients having NRS >4 on movement in group C (72%) compared to group T (46.5%) and group I (46.5%) was significant (P = 0.034). No statistically significant difference was observed in the incidence of side effects among study groups (P > 0.05). Conclusion: Except for the immediate postoperative period, neither TAP block nor LAI had added benefit to the multimodal analgesia regimen in patients undergoing gynecological surgeries.
RESUMEN
Abstract The poultry sector in Pakistan is contributing mainly in bridging gap between demand and supply for protein. Mycoplasma gallisepticum is an emerging bacterium causing serious problems in poultry industry of Pakistan. A cross-sectional study was conducted to evaluate the M. gallisepticum load in poultry populated regions of Pakistan. Total 600 serum and 600 swab samples were collected, 200 from each broiler, layers and breeders poultry in Rawalpindi and Abbottabad districts. Serum samples were analyzed through ELISA for seroprevalence. Swabs were cultured on Frey's medium followed by PCR and partial mgc2 gene sequencing. Results of seroprevalence of M. gallisepticum showed that layers (75%, n=150) are more positive as compared to breeders (70%, n=140) and broilers (50%, n=100). Typical colonies of the M. gallisepticum were observed in breeder (26.5%), followed by layer (21%) and broilers (9%). A total of 37.1% (n=42) samples were identified positive through PCR out of total 113 cultured based positive samples. A total of six M. gallisepticum isolates of current study showed 98-99 percent similarity with previously reported isolates on the basis of mgc2 gene partial sequencing. The M. gallisepticum was found highly prevalent in different poultry breads. Results of this study would add into basic data and provide a direction for livestock sector to strengthen a control strategy for mycoplasmosis in poultry farms.
Resumo O setor avícola do Paquistão está contribuindo principalmente para preencher a lacuna entre a demanda e a oferta de proteína. Mycoplasma gallisepticum é uma bactéria emergente que causa sérios problemas na indústria avícola do Paquistão. Um estudo transversal foi conduzido para avaliar a carga de M. gallisepticum em regiões de avicultura do Paquistão. Um total de 600 amostras de soro e 600 amostras de esfregaço foi coletado, 200 de cada frango de corte, poedeiras e aves reprodutoras nos distritos de Rawalpindi e Abbottabad. Amostras de soro foram analisadas por ELISA para soroprevalência. As zaragatoas foram cultivadas em meio Frey, seguido de PCR e sequenciação parcial do gene mgc2. Os resultados da soroprevalência de M. gallisepticum mostraram que as poedeiras (75%, n = 150) são mais positivas em comparação com matrizes (70%, n = 140) e frangos de corte (50%, n = 100). Colônias típicas de M. gallisepticum foram observadas em reprodutoras (26,5%), seguidas de poedeiras (21%) e frangos de corte (9%). Um total de 37,1% (n = 42) das amostras foi identificado como positivas por PCR de um total de 113 amostras positivas baseadas em cultura. Um total de seis isolados de M. gallisepticum do estudo atual mostrou 98-99% de similaridade com isolados relatados anteriormente com base no sequenciamento parcial do gene mgc2. O M. gallisepticum foi encontrado com alta prevalência em diferentes pães de aves. Os resultados deste estudo acrescentariam dados básicos e forneceriam orientação para o setor pecuário fortalecer uma estratégia de controle da micoplasmose em granjas avícolas.
Asunto(s)
Animales , Enfermedades de las Aves de Corral/epidemiología , Mycoplasma gallisepticum/genética , Pakistán/epidemiología , Aves de Corral , Estudios Seroepidemiológicos , Pollos , Estudios TransversalesRESUMEN
Paraneoplastic syndromes (PNS) are uncommon, distinct clinical complications of a primary tumor. Paraneoplastic cerebellar degeneration (PCD) is a PNS that is described as an autoimmune response targeting Purkinje cells in the cerebellum. Ovarian cancer (OC) is one of the most prevalent causes of cancer-related deaths in women. Anti-Yo is the most common onconeural antibody produced in the PCD immune response and is most typically found in ovarian and breast cancer patients. While the current literature highlights the predisposing genetic factors, diagnostic workflows, and treatment options, the pathophysiology of PCD, among other considerations, remains largely unestablished. This review aimed to systematically observe procedural solutions to facilitate an early diagnosis and improve the prognosis of patients with OC-associated PCD. To that end, we examined literature published from 01/01/2015-11/10/2022 indexed in PubMed by using the keywords "paraneoplastic, cerebellar degeneration" combined with "ovarian cancer." Inclusion criteria were met if PCD and OC diagnoses were made and if studies provided adequate patient information. After screening and assessing records for eligibility using the inclusion and exclusion criteria, 18 articles involving 102 patients were included. The typical patient observed in this sample was diagnosed with International Federation of Gynecology and Obstetrics (FIGO) Stage III, high-grade serous carcinoma. The diagnostic workup typically included a clinical evaluation for dysarthria (50%), ataxia (60%), and gait abnormalities (50%), along with multiple imaging modalities and serological findings (90%). Genetic screening for human leukocyte antigen (HLA) haplotype susceptibility for PCD and immune tolerance modulators regulation may also be recommended prior to starting treatment. Findings support the use of corticosteroids (35%) and intravenous immunoglobulin (IVIg) (40%) as viable treatment options for managing PCD in conjunction with systemic therapy for the primary malignancy. A diagnosis of PCD should be considered if a patient has had a malignancy in the past five years with the presence of explicit cerebellar symptoms. This clinical diagnosis can be further supplemented by serologic and radiologic findings. Recognizing PCD symptoms and scheduling genetic and proteomic testing may help with early diagnosis and better prognosis.